Acer 5538 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 226 pages
- 7.12 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Laptop
Acer Extensa 5235 Series
12 pages 12.41 mb -
Laptop
Acer X5400
96 pages 12.66 mb -
Laptop
Acer 5738ZG
232 pages 18.97 mb -
Laptop
Acer E1-732G
98 pages 5.89 mb -
Laptop
Acer 3040 Series
100 pages 2.44 mb -
Laptop
Acer 260 series
79 pages 5.27 mb -
Laptop
Acer 5710
96 pages 4.46 mb -
Laptop
Acer 4930G
222 pages 4.71 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Acer 5538. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Acer 5538 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Acer 5538 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Acer 5538 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Acer 5538
- nom du fabricant et année de fabrication Acer 5538
- instructions d'utilisation, de réglage et d’entretien de l'équipement Acer 5538
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Acer 5538 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Acer 5538 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Acer en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Acer 5538, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Acer 5538, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Acer 5538. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Aspire 5538 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.acer .com.tw[...]
-
Page 2
II Revision History Please refer to the table below for the updates ma de on this service guide. Date Chapter Up date s[...]
-
Page 3
III Copyright Copyright © 2009 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan guage or computer language, in any form or by any means, electronic, mechanical, magne tic, optical, chemi cal, manual or otherwise, without th[...]
-
Page 4
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives bits and pieces of additional information related to the cu rrent topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to av[...]
-
Page 5
V Preface Before using this information and the product it s upports, please read the fo llowing general info rma tion. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGUR A TION decided for Acer's "glo bal" product offering. T o better fit local market requirements and enhance product c[...]
-
Page 6
VI[...]
-
Page 7
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Your Notebook Tour . . . . . . . . . . . . . . . . . [...]
-
Page 8
VIII T able of Contents Removing the Touchpad Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Removing the Power Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Removing the Speaker Modu le s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Removin[...]
-
Page 9
IX T able of Contents No Display Issue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Random Loss of BIOS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 LCD Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]
-
Page 10
X T able of Contents[...]
-
Page 11
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many features: Operating System • Genuine Windows Vista® Platform • AMD Better By Design Program, featuring: • AMD Athlon™ 64 X2 dual-co re processor* • AMD Athlon™ 64 processor* • AMD M780G Chipset • Acer InviLink™ Nplif y™ 802.1 1b/g/Draf[...]
-
Page 12
2 Chapter 1 Communication • Integrated Acer Crystal Eye webcam •W L A N : • Acer InviLink™ Nplify™ 802.1 1b/g/Draft-N* • Acer InviLink™ 802.1 1b/g* • WP AN: Bluetooth® 2.1+Enhanced Data Rate (EDR)* • LAN: Gigabit Ethernet; Wake-on-LAN ready Privacy control • BIOS user , supervisor , HDD passwords • Kensington lock slot Dimens[...]
-
Page 13
Chapter 1 3 • Operating: 20% to 80% • Non-operating: 2 0% to 80% NOTE: The specifications listed above are for refe re nce only . The exact configuration of the PC depends on the model purchased .[...]
-
Page 14
4 Chapter 1 System Block Diagram Power On/Off CKT. CRT Conn. LPC BUS uFCBGA-528 Int.KB USB conn X 2 A link Expres s2 DC/DC Interface CKT. AMD S1G1 Processor 3.3V 48MHz yper Transport Link 16 x 16 Fan Control Power Circuit uPGA-638 Package ATI RS780MN BIOS HD Audio ATI SB710 ENE KB926 LVDS Conn. BT Conn 3.3V 24.576MHz /48Mhz RTC CKT. SATA HDD Conn. [...]
-
Page 15
Chapter 1 5 Your Notebook Tour This section provides an overview of th e featu res and functions of the notebook. Front View No. Icon Item Description 1 Acer Crystal Ey e Web ca m Web camera for video communication. 2 Microphone Internal microphone for sound recording. 3 Display screen Also called Liquid-Crystal Display (LCD), displays computer out[...]
-
Page 16
6 Chapter 1 Closed Front View Left View 10 Communication key Enables / disables the WLAN function. Backup key Launches Acer Backup Management for three-step data backup. HDD Indicates when the hard disk drive is active. 7 Eject button Presses to eject the optical disk from the drive. 8 S peakers Left and right speakers de liver ste reo audio output[...]
-
Page 17
Chapter 1 7 Right View 2 V en tilation slots Enable the computer to stay cool, even after prolonged use. 3 External display (VGA) port Connects to a display de vice (e.g., external monitor , L CD projector). 4 HDMI HDMI port Supports high definition digital video connections. 5 USB 2.0 port Connect to USB 2. 0 devices (e.g., USB mouse, USB camera).[...]
-
Page 18
8 Chapter 1 Base View Rear View No. Icon Item Description 1 Battery bay Houses the computer's battery pack. Note: The battery shown is for reference only . Y our PC may have a different battery , depending on the model purchased. 2 Battery lock Locks the battery in position. 3 Memory compartment Houses the computer's main memory . 4 Hard [...]
-
Page 19
Chapter 1 9 Indicators The computer has several easy-to-read status indica tors. The battery indicato r is visible even when the computer cover is closed. NOTE: 1. Charging: The b at te r y l ig ht shows am be r w hen the battery is charging. 2. Full y charged: The ligh t shows green when i n AC mode. Icon Fu nction Description Bluetooth Indicates [...]
-
Page 20
10 Chapter 1 TouchPad Basics The following items show you how to use the T ouchPa d: • Move your finger across the T ouchPad (1) to move th e cursor . • Press the left (2) and right (3) buttons located beneath the T ouchPad to perform selection and execution functions. These two buttons are simila r to the left and right buttons on a mouse. T a[...]
-
Page 21
Chapter 1 11 Using the Keyboard Y our Acer Aspire Series noteb ook has a close-to-full-sized keyboard and an embedded numeri c keypad, separate cursor , lock, function and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which yo u can to ggle on and off. The embedded numeri c keypad functions like a desktop nume[...]
-
Page 22
12 Chapter 1 Windows Keys The keyboard has two keys that perform Wi ndow s-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu. It can also be used with other keys to provide a variety of functions: <> : Open or close th e S tart men[...]
-
Page 23
Chapter 1 13 Hot Keys The computer employs hotkeys or key combinations to access most of the computer 's controls like screen brightness and volu me output. T o activate hotkeys, press and hold the <Fn> key before pressing the other key in the hotkey combi nation. Hotkey Icon Functi on Description <Fn> + <F2> System Propertie[...]
-
Page 24
14 Chapter 1 Special Keys Y ou can locate the Euro symbol and the US dollar si gn at the upper-center an d/or bottom-right of your keyboard. The Euro symbol 1. Open a text editor or word processor. 2. Hold <Alt Gr> and the n press the <5> key at the upper-center of the keyboard . NOTE: Some fonts and software do not support the Euro sym[...]
-
Page 25
Chapter 1 15 Hardware Specifications and Configurations Processor Processor Specifications CPU Fan T rue V alue T able Throttling 50% : On = 90°C; OFF=80°C OS shut down at 95°C; H/W shut down at 87°C North Bridge Specifications South Bridge S pecificatio ns System Memory Item Specification CPU type AMD S1g1 processor CPU package 638-pin lidless[...]
-
Page 26
16 Chapter 1 Vid eo Sp ec i fi c a t io ns Hard Disk Drive Interface Supports DIMM S peed 667MHZ Item Specification Chipset Integrated VGA solution for AMD RS780MN (UMA). On board VGA solution for A TI M92-S2 LP (DIS). Package Features • Adjustable 128MB UMA VGA memory share from North Bridge. • Adjustable 512MB DIS VGA memory share from North [...]
-
Page 27
Chapter 1 17 Buffer size 8 MB 8 MB 8MB 8 MB Interface SA T A SA T A SA T A SA T A Internal transfer rate (Mbits/sec, max) 830 1 175 830 1 175 I/O data transfer rate (Mbytes/sec max) 875 Mbits/s maximum 845 Mbits/s maximum DC Power Requirements V oltage +5.0V ± 5%. Item Specification s V endo r & Model Name To s h i b a MK1655GSX To s h i b a M[...]
-
Page 28
18 Chapter 1 S pindle speed (RPM) 5400 Performance S pecifications Buffer size 8 MB Interface SA T A Internal transfer rate (Mbits/sec, max) N/A I/O data transfer rate (Mbytes/sec max) 300 DC Power Requirements V oltage 5V ±5% Item Specification s[...]
-
Page 29
Chapter 1 19 Super-Multi Driv e Module BIOS LED 15.6” Item Specification V endor & model name HLDS GU10N P ANASONIC UJ892 Performance S pecification With CD Diskette With DVD Diskette With CD Diskette With DVD Diskette T ransfer rate (MB/sec) Sustained: . Sustained: Sustained: Sustained: Buffer Memory Interface Applicable disc formats • Loa[...]
-
Page 30
20 Chapter 1 Bluetooth Audio Codec and Ampli f ie r LAN Interface Keyboard Mini Card Camera Weight (without inverter) Physical Size (mm) Electrical Interface Viewing Angle (degree) Horizontal (Right) / (Left) V ertical (Upper) / (Lower) Item S pecification Bluetooth Controller Foxconn Blu etooth BRM 2046 BT2.1 (T60H928.33) Supported Protocols 1.1, [...]
-
Page 31
Chapter 1 21 Wireless LAN Interface Optical aperture Focusing range Dimensions (L x W x H mm) Sensor type Pixel resolution Pixel size Image size Item Specification S pecification Speci fication T ype Foxconn FOX_A TH_XB63 Foxconn Atheros XB63 minicard b/g Foxconn Wireless LAN Atheros AR5B91 1x2 BGN Foxconn Wireless LAN Wireless LAN Ralink RT2700E 1[...]
-
Page 32
22 Chapter 1 Battery Operating Frequency Modulation Schemes Channel Numbers • Data Rate Media Access Protocol T ransmitter Output Power 802.1 1b Radio T echnology Operating Frequency Modulation Schemes Channel Numb er • Data Rate Media Access Protocol T ransmitter Output Power Item Sp ecification V endo r & model name Battery T ype Li-ion P[...]
-
Page 33
Chapter 2 23 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is alre ady properly configured and optimi zed, and you do not need to run this utility . However , if you encounter configuration problems, you may need to run[...]
-
Page 34
24 Chapter 2 Information The Information screen displays a summary of your computer ha rdware information. NOTE: The system information is su bject to diff erent models. Parameter Description CPU T ype This field shows the CP U type and spee d of the system. CPU S p eed This field shows the speed of the CPU. HDD Model Name This field shows the mode[...]
-
Page 35
Chapter 2 25 Main The Main screen allows th e user to set the system time and date as well as enable and disable bo ot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Pa[...]
-
Page 36
26 Chapter 2 Advanced The Advanced screen allows the user to c onfigu re the various advanced BIOS options. IMPORT ANT : Making incorrect settings to items on these p ages m ay cause th e system to malfunction. Unless you have experience adjusting these items, we recommend th a t you lea v e th ese settings at the default values. If making settings[...]
-
Page 37
Chapter 2 27 Peripheral Configuration Enter the Peripheral Con figuration menu. • Peri pheral Configuration: •S e r i a l P o r t A •S e r i a l P o r t B • Parallel Port • SB On-chip Device Configuration • OHCI0 • OHCI1 • OHCI2 • OHCI3 • OHCI4 • EHCI0 • EHCI1 •S A T A • Azalia IDE Configuration Enter the IDE Confi gurat[...]
-
Page 38
28 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mputer from unautho ri zed use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: When you are prompted to enter a password, you ha ve three tries befo re the sys[...]
-
Page 39
Chapter 2 29 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a password in the “Ente r New Password” field. The password length can not exceeds 8 alphan[...]
-
Page 40
30 Chapter 2 Changing a Password 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current passw or d in the Enter Curr en t Pa ssw or d field and press Enter . 3. T ype a password in the Enter New Password field . Retype the password in the Confirm N[...]
-
Page 41
Chapter 2 31 Power The Power screen allows th e user to co nfig ure CPU and power management options. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter Description Submenu Items Advanced CPU Control Enter the Advanced CPU Control menu. • IST Con fi guration ?[...]
-
Page 42
32 Chapter 2 Boot This menu allows the user to deci de the order of boot devices to l oad the operating syste m. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module bay . Item Specific Help Use < > or < > to select a device, then press <F5> to move it down the list, or &l[...]
-
Page 43
Chapter 2 33 Exit The Exit screen allows you to save or discard any changes you made an d qui t th e BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setu p and save your changes to CMOS. Exit Discarding Changes Exit utility without saving setup data to CMOS. Load Setup De[...]
-
Page 44
34 Chapter 2 BIOS Flash Utility The BIOS flash memory upd ate is required for th e following con ditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted.[...]
-
Page 45
Chapter 2 35 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Menu. 2. Select Boot Menu to modify the boot priority order , for example, if using USB HDD to Update BIOS, move USB HDD to position 1. 3. Execute the FLASH.BA T batch file to update BIOS. The flash process begins as s[...]
-
Page 46
36 Chapter 2 WinFlash Utility Perform the following steps to use the WinFlash Utility: 1. Double click the WinFlash executable. 2. Click OK to begin the update. A progress screen displays. 3. When the process is complete, close all prog rams and applicat ions and reboot the system.[...]
-
Page 47
Chapter 2 37 Remove HDD/BIOS Password Utilities This section provide you with removing HDD /BIOS method: Remove HDD Password: When the user keys in the wrong password three times, the system reports the following error code to user . T o unlock the HDD password, perform the following steps: 1. Press Enter to display the Select Item screen. 2. Selec[...]
-
Page 48
38 Chapter 2 Removing BIOS Passwords: If you key in the wrong Supervisor Password three time s, System Disabled displa ys on the screen. See the image below . T o reset the BIOS password, run clnpwd.exe as follows: 1. From a DOS prompt, Execute clnpwd.exe 2. Press 1 or 2 to clean the desired password shown on the screen. The on-screen message deter[...]
-
Page 49
Chapter 2 39 Miscellaneous Utilities Using Boot Sequence Selector Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. T o use Boot Sequence Selector , perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen. 3. Select the desired boot seque nce by entering the corresponding se[...]
-
Page 50
40 Chapter 2 Example 1: Read DMI In formation from Memory Input: dmitools /r Output: Manufacturer (T ype1, Offset04h): Acer Product Name (T ype1, Offset05h): Aspire 5538 xxxxx Serial Number (T ype1 , Offset07h): 01234567890123456789 UUID S tring (T ype1, Offset08h): xxxxxxxx-xxxx-xxxx-xxxx-xxxxx xxxxxxx Asset T ag (T ype3, Offs et04h): Acer Asst ag[...]
-
Page 51
Chapter 2 41[...]
-
Page 52
Chapter 3 42 Machine Disassembly and Replacement This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting . Disassembly Requirements T o disassemble the computer , you need the follow ing tool s: • Wrist grounding strap and conductive mat for preventing electrostatic discharge[...]
-
Page 53
43 Chapter 3 General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system. 3. Place the system on a flat, stable surface. 4. Remove the batter[...]
-
Page 54
Chapter 3 44 External Module Disassembly Process NOTE: The product previews seen in the disassembly proce dures may not represent the final product color or configuration. External Modules Disassembly Flowchart Screw List Ste p Screw Quantity Part No. HDD Module M2.5*4 2 86.PEA02.003 HDD Carrier M3*3 4 86.PEA02.008 WLAN Board M2*3 1 86.PEA02.001 OD[...]
-
Page 55
45 Chapter 3 Removing the Battery Pack 1. T urn the computer over . 2. Slide the battery lock/unlock l atch to the unlock p osition. 3. Slide and hold the battery relea se latch to the release pos ition (1), the n slide out the battery pack from the main unit (2). 1 2[...]
-
Page 56
Chapter 3 46 Removing the Hard Disk Drive Module 1. See “Removing the Battery Pack” on page 45 2. Loosen the two captive scre ws in the HDD Cover . 3. Lift the HDD cover up using the finger tab to re mo ve. Six tabs hold the door in place.[...]
-
Page 57
47 Chapter 3 4. Remove the two screws securing the HDD Module in place. 5. Slide the HDD in the direction of the arrow to disconn ect the HDD from t he interface connector. Ste p Size Quantity Screw T ype HDD Module M2.5*4 2[...]
-
Page 58
Chapter 3 48 6. Lift the hard disk dr ive module out of the bay . NOTE: T o prevent damage to device, avoid pressing down on it or pla cing he avy objects on top of it. 7. Remove the four screws (two each side) securing the hard disk to the carrier . Ste p Size Quantity Screw T ype HDD Carrier M3*3 4[...]
-
Page 59
49 Chapter 3 8. Remove the HDD from the carrier . Removing the Optical Disk Drive Module 1. See “Removing the Battery Pack” on page 45 2. Loosen the three captive screws in th e HDD Cover .[...]
-
Page 60
Chapter 3 50 3. Lift the HDD cover up using the finger tab to re mo ve. Six tabs hold the door in place. 4. Remove the screw securing the ODD module. 5. Slide the ODD module out of the assembly Ste p Size Quantity Screw T ype ODD Module M2.5*3 1[...]
-
Page 61
51 Chapter 3 6. Remove the screws securing the ODD bracket and remo ve the ODD bracket from the optical disk drive module. 7. Insert an appropriate tool into th e ma nual ODD tray release to open the ODD tray . 8. Press down on the ODD bezel securing c lip and pull the bezel out of the ODD. Ste p Size Quantity Screw T ype ODD Bracket M2*3 2[...]
-
Page 62
Chapter 3 52 Removing the DIMM Module 1. See “Removing the Battery Pack” on page 45 2. Loosen the two captive screws in the Memory Cover . 3. Lift the Memory Cover up to remove . Pull up using the thumb t ab (indicated by the circl e below) to release the seven clips securing the cover in place. 4. Identify the SO DIMM to remove . T he image be[...]
-
Page 63
53 Chapter 3 5. Push out the release latches on both sides of SODIMM socket 1 to release the memory mo dule. 6. Remove the DIMM. 7. Push out the release latches on both sides of SODIMM socket 0 to release the DIMM.[...]
-
Page 64
Chapter 3 54 8. Remove the DIMM.[...]
-
Page 65
55 Chapter 3 Removing the WLAN Board 1. See “Removing the Battery Pack” on page 45. 2. Loosen the two captive scre ws in the HDD Cover . 3. Lift the HDD cover up to remove. Use the finger tab to release the six clips securing the cover in place. NOTE: The HDD is al so located under th is cover .[...]
-
Page 66
Chapter 3 56 4. Disconnect the Antenna cabl es from the WLAN Board. NOTE: Cable placement is White to the AUX terminal (r ight) and Black to the MAIN terminal (left). 5. Remove the single screw securing the WLAN Board in place. Ste p Size Quantity Screw T ype WLAN Board M2*3 1[...]
-
Page 67
57 Chapter 3 6. Remove the WLAN Board from the Mainboard.[...]
-
Page 68
Chapter 3 58 Main Unit Disassembly Process IMPORT ANT : Cable paths and positioning may not represen t the actual model. During the removal and replacement of components, ensure all a vailable cabl e channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly proce dures may [...]
-
Page 69
59 Chapter 3 Media Board M2.5* 3 1 86.PEA02.001 I/O Board M2.5* 6 1 86.PEA02.007 Mainboard M2.5* 5 1 86.PEA02.007 LCD Module M2.5*6 1 86.PEA02.007 LCD Module M2.5*8 2 86.PEA02.006 Fan M2.5*6 3 86.PEA02.007 Thermal Module M2.5 *6 (sp ring tension) 4 86.PEA02.004 Ste p Screw Quantity Part No.[...]
-
Page 70
Chapter 3 60 Removing the Keyboard IMPORT ANT : The keyboard is easily warped or damaged durin g the removal process. T ake care not to use excessive force when removing the keyboard and replace if any damage occu rs. 1. See “Removing the Battery Pack” on page 45. 2. T urn the computer rightside up and open the lid to the full extent. 3. Unlock[...]
-
Page 71
61 Chapter 3 5. T urn the Keyboard over and lay down on the touch pad. 6. Open the Keyboard FFC securing la tch as shown, then disconnect the FFC and remove the Keyboard.[...]
-
Page 72
Chapter 3 62 Removing the Upper Cover 1. Remove all external modules. See “External Mo dules Disassembly Flowchart” on page 44. 2. Remove the screws securing the Upper Cover to the Lower Cover . 3. T urn the computer over and disconnect the following cables from the Mainboard: Ste p Size Quantity Screw T ype Upper Cover M 2.5*8 18[...]
-
Page 73
63 Chapter 3 a. Disconnect the S peaker Cable as shown. b. Release the locking latch and disconne ct th e Power Board FFC as shown. c. Release the locking latch and disconne ct the Button Board FFC as shown.[...]
-
Page 74
Chapter 3 64 d. Release the locking latch and disconne ct the Media Board FFC as shown. 4. Remove the six securing scr ews from the Upper Cover. Ste p Size Quantity Screw T ype Upper Cover M 2.5*6 6[...]
-
Page 75
65 Chapter 3 5. S t arting at a top corner , pry ap art the Upper and Lower Covers as shown. 6. Working from the back corners toward the back center , pry a part the covers to release the securin g hooks on the top edge as shown. 7. Push the front corner of the top co ver towards the back to release the front edge hooks an d pry apart as shown. Wor[...]
-
Page 76
Chapter 3 66 Removing the Button Board IMPORT ANT : The T ouchpad Board cannot be removed individu ally . T o replace the Button Board, replace the entire Upper Cover . 1. See “Removing the Upper Cove r” on page 62. 2. Remove the mylar sheet covering the Button Board. 3. Remove the four screws securing t he button board to the Upper Cover . Ste[...]
-
Page 77
67 Chapter 3 4. Lift the securing latch and disconnect the single FFC conne cting the Button Boar d to the T ouchpad. 5. Peel back the two FFCs to release the adhesive. IMPORT ANT : Ensure that the FFCs are disconnected befor e attempting to remove the Button Boar d. 6. Slide the Button Board out from under the securin g tab in the Upper Cover as s[...]
-
Page 78
Chapter 3 68 7. Pull the Mainboard FFC through the cover as shown. IMPORT ANT : Ensure that the FFC is not torn off during removal.[...]
-
Page 79
69 Chapter 3 Removing the Touchpad Bracket 1. See “Removing the Button Board” on page 66. 2. Remove the single screw securing the T ouchpad Bracket to the Upper Cover . 3. Pull the bracket up from under the securing tabs along the top edge. NOTE: It may be necessary to use a tool to first push the securing tabs back so th at the bracket ma y be[...]
-
Page 80
Chapter 3 70 4. Slide the T ouchpad Bracket out from the slots in the upper cover .[...]
-
Page 81
71 Chapter 3 Removing the Power Board 1. See “Removing the Upper Cove r” on page 62. 2. Remove the single screw securing the Power Board to the Lower Cover . 3. Pull the FFC up to remove it from the adhe sive securing it to the S peaker Module. 4. T ilt the board 90 degrees to clear the securing tab. Ste p Size Quantity Screw T ype Power Board [...]
-
Page 82
Chapter 3 72 IMPORT ANT : The FFC is soldered to the power board. T ake care when lifting to minimize bendin g of the connection, lest bre akage occur . 5. Lift the Power Board from the Lower Cover .[...]
-
Page 83
73 Chapter 3 Removing the Speaker Modules 1. See “Removing the Power Board” on page 71. 2. Remove the four screws securing the S peakers to the Upper Cover . 3. Lift the right side speaker out from the Lower Cove r and peel back the mylar to expose the speaker wire as shown. 4. Peel back the mylar sheet to expose the speaker cable all the way t[...]
-
Page 84
Chapter 3 74 5. Remove the S peaker Cable from the cable channel. Ensu re that the cable is free from all cable clips. 6. Lift the right side speaker out from the Lower Cover as shown.[...]
-
Page 85
75 Chapter 3 Removing the Media Board 1. See “Removing the S peaker Modules” on page 73. 2. Remove the single screw securing the Media Board to the Lower Cover . 3. Remove the securing bracket from the Media Board. Ste p Size Quantity Screw T ype Media Board M2.5*3 1[...]
-
Page 86
Chapter 3 76 4. Peel back any mylar adhered to the Media Board. 5. T ilt the Media Board up to clear the securing pins. 6. Remove the Media Board, pulling t he FF C th rough the cover as shown. IMPORT ANT : Ensure that the FFC is not torn off during removal.[...]
-
Page 87
77 Chapter 3 Removing the Bluetooth Module 1. See “Removing the Upper Cove r” on page 62. 2. Disconnect the cable from the Bluetooth Module. 3. Lift the Bluetooth Module, left side first, to remove it from the Lower Cover .[...]
-
Page 88
Chapter 3 78 Removing the I/O Board 1. See “Removing the Upper Cove r” on page 62. 2. Open the locking latch and disco nnect the FFC from the Mainbo ard. 3. Disconnect the cable from the Mainboard.[...]
-
Page 89
79 Chapter 3 4. Remove the single screw securing the I/O Board to the Lower Cover . 5. T ilt the board up as indicated and carefully flip the board over. Ste p Size Quantity Screw T ype I/O Board M2.5*6 1[...]
-
Page 90
Chapter 3 80 6. Remove the adhesive securing the I/O Board cable to the Lower Co ve r . 7. Disconnect the I/O Board Cable from the I/O Board.[...]
-
Page 91
81 Chapter 3 Removing the DC-In Cable 1. See “Removing the I/O Board” on page 78. 2. Remove the DC-In Socket from the well on the bottom cover . 3. Remove the DC cable from the securing clips as shown. NOTE: If replacing the DC cable, the mainboard must be lifted to access the connector . See “Removing the Mainboard” on page 82 for instruct[...]
-
Page 92
Chapter 3 82 Removing the Mainboard 1. See “Removing the DC-In Cable” on page 81. 2. Disconnect the Microphone cable from the Mainboard. 3. Disconnect the Bluetooth cable from the Mainboard.[...]
-
Page 93
83 Chapter 3 4. Remove the two screws securing the Mainboard and Fa n to the Lo wer Cover as indicated. 5. Lift the Mainboard right side first to release the I/O ports and separate the board from the Lower Cover . Ste p Size Quantity Screw T ype Mainboard M2.5*5 2[...]
-
Page 94
Chapter 3 84 6. Reach under the mainboard to unplug the L VDS cable , and remove the Mainboard fro m the assembl y . 7. Disconnect the DC-In Cable from the mainboard.[...]
-
Page 95
85 Chapter 3 Removing the LCD Module 1. See “Removing the Mainboard” on page 82. 2. Lift the adhesive strip securing the WLAN cables in place. 3. Remove the Antenna cable s from the cable channel on the Lower Cover as shown, all the way to the hinge well. 4. Remove the Microphone cable from the securing clips as shown.[...]
-
Page 96
Chapter 3 86 5. Remove the three screws on the rear of the Lower Cover securing the LCD Module to the Lower Cover. IMPORT ANT : Ensure that the LCD cables are free from all cable clips before removing the LCD Mo dul e. 6. Using both hands, lift the LCD Module away from the L ower Cover . Ste p Size Quantity Screw T ype LCD Module (red) M2.5*6 1 LCD[...]
-
Page 97
87 Chapter 3 Removing the Fan 1. See “Removing the Mainboard” on page 82. 2. Disconnect the fan cable from the Mainboard. 3. Remove the single screw securing the fan to the Mainboard. Ste p Size Quantity Screw T ype Fan M2.5*6 3[...]
-
Page 98
Chapter 3 88 4. Lift the fan away from the Mainboa rd.[...]
-
Page 99
89 Chapter 3 Removing the Thermal Module 1. See “Removing the Fan” on page 87. 2. Remove the four screws securing the Thermal Module to the Mainboa rd in th e following order: 1, 2, 3, 4. 3. Grasp the Thermal Module by the CPU heat sink and lift clear of the Mainboard as shown. Ste p Size Quantity Screw T ype Thermal Module M2.5*6 4 1 2 3 4[...]
-
Page 100
Chapter 3 90 Removing the CPU 1. See “Removing the Therma l Module” on page 89. 2. Using a flat blade screw driver , rotate the CPU screw 180° counter clockwise to releas e the CPU from th e socket. 3. Lift the CPU clear of the socket.[...]
-
Page 101
91 Chapter 3 LCD Module Disassembly Process IMPORT ANT : Cable paths and positioning may not represen t the actual model. During the removal and replacement of components, ensure all a vailable cabl e channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly proce dures may[...]
-
Page 102
Chapter 3 92 Removing the LCD Bezel 1. See “Removing the LCD Module” on page 85. 2. Remove the four screw covers and four scre ws securi ng the front bezel to the LCD co ver . 3. S t arting from the inside top edge, pry the bezel away from the panel. Con tinue moving along the top, prying the bezel away from the LCD Module. If necessary , use a[...]
-
Page 103
93 Chapter 3 4. Work towards the middle and down the sides of the bezel, separating the securing clips. 5. Pry apart the bottom edge of t he bezel and push slightly upwards to release th e hin ge covers. 6. Lift up the bezel and remove it from the LCD Module.[...]
-
Page 104
Chapter 3 94 Removing the Camera Board 1. See “Removing the LCD Bezel” on page 92. 2. Remove the Camera Board from the LCD Module. 3. Disconnect the cable from the Camera Board as shown.[...]
-
Page 105
95 Chapter 3 Removing the LCD Panel 1. See “Removing the Camera Board” on page 94. 2. Remove the four screws securing the LCD Panel to the LCD Module. 3. Lift the LCD Panel out of the LCD Module front edg e first. Ste p Size Quantity Screw T ype LCD Panel M2*3 4[...]
-
Page 106
Chapter 3 96 Removing the FPC Cable 1. See “Removing the LCD Panel” on page 95. 2. T urn the LCD panel over on a clean surface. 3. Lift the camera cable to detach the adhesive securing the cable to the LCD Panel . 4. Carefully lift the adhesive tape securing the L VDS cable connector to the LCD Panel.[...]
-
Page 107
97 Chapter 3 5. Hold the adhesive tape clear of the LCD Panel. 6. Disconnect the LCD cable as shown and remove the cable from the LCD Panel.[...]
-
Page 108
Chapter 3 98 Removing the LCD Brackets 1. See “Removing the LCD Panel” on page 95. 2. Pick up the antenna cable so the bracket can clear the cable. 3. Lift the top of the lef t LCD Bracket up and slide out from under the antenna cable. 4. Lift the top of the right LCD Bracket up and slide out from under the ante nna cabl e.[...]
-
Page 109
99 Chapter 3 Removing the Microphone 1. See “Removing the LCD Panel” on page 95. 2. Remove the tape securing the Microphone cabl e to the antenna cabl es. 3. Remove the Microphone cable from the shield ing alo ng the bottom edge of the LCD Cover . 4. Lift up the shielding where it covers the Microphone cable and lift the cable as shown to remov[...]
-
Page 110
Chapter 3 100 5. Lift the Microphone Module upward to detach the adhesive holding it in place.[...]
-
Page 111
101 Chapter 3 Removing the Antennas 1. See “Removing the LCD Panel” on page 95. 2. Remove the tape securing the Microphone cabl e to the antenna cabl es. 3. Lift up the shielding ho lding the ri ght Antenna cable in place. Ensu re that the cable i s free from all fasteners. 4. Carefully pry up the right Antenna pad, as shown, and remove the pad[...]
-
Page 112
Chapter 3 102 5. Lift up the shielding ho lding the left Antenna ca ble in place. Ensure that the cable is free from all fasteners. 6. Carefully pry up the left Antenna pad and remove the pad from the LCD Module. IMPORT ANT : A strong adhesive is used to secure the Antenna pad in place. T ake care not to bend the pad during removal.[...]
-
Page 113
103 Chapter 3 LCD Module Reassembly Procedure Replacing the Antennas 1. Adhere the Left Antenna Pad (W hite cable) to the LCD Cover as shown. 2. Replace the shielding to secure the left Antenna cabl e in pl ace. Ensure that the cable passes under all fasteners.[...]
-
Page 114
Chapter 3 104 3. Adhere the Left Antenna Pad (Bla ck cable) to the LC D Cover as shown. 4. Replace the shielding to secure the right Antenna cabl e in place. Ensure that the cable passes under all fasteners. Replacing the Microphone 1. Push the Microphone Module in pla ce as shown.[...]
-
Page 115
105 Chapter 3 2. Press the cable onto the LCD cover as shown to secure it in place. Adhere the shielding tabs where they cover the Microphone cable . 3. Secure the Microphone cable under the shielding tabs along the botto m edge of the LCD Cover . 4. Apply tape to secure the Microphone cable to the antenna cables.[...]
-
Page 116
Chapter 3 106 Replacing the LCD Brackets 1. Lift the antenna cable and slide the left LCD Bracket under the antenna cable. 2. Place the LCD bracket on the LCD cover so the LCD Cover pins penetrate the bra cket. 3. Lift the antenna cable and slide the ri ght LCD Bracket under the antenna cable.[...]
-
Page 117
107 Chapter 3 4. Place the LCD bracket on the LCD cover so the LCD Cover pins penetrate the bra cket. Replacing the FPC Cable 1. Connect the LCD cable as shown. 2. Adhere the clear adhesive tape to the LCD Panel.[...]
-
Page 118
Chapter 3 108 3. Adhere the camera cable to the L CD Panel. Replacing the LCD Panel 1. Place the LCD Panel into of the LCD Cover back edg e first, aligning the pins with the holes in the mounting tabs.[...]
-
Page 119
109 Chapter 3 2. Insert the four screws to secure the LCD Panel to the LCD Module. Replacing the Camera Board 1. Connect the cable to the Camera Bo ard as shown. Ste p Size Quantity Screw T ype LCD Panel M2*3 4[...]
-
Page 120
Chapter 3 11 0 2. Place the Camera Board into the LCD Module so that the mountin g pins are al igned and press down to secure to the adhesive. NOTE: Be sure the magnet rests next to the post on the LCD cover as shown. Replacing the LCD Bezel 1. Route the L VDS cable through the cable chann el and hinge cover as shown. 2. Route the Antenna cables an[...]
-
Page 121
111 Chapter 3 3. Connect the left and right hinge cover part of the LCD bezel, making sure that the cables pass through the holes. 4. Press down on the bottom edge of the bezel until the securing clips snap into place.[...]
-
Page 122
Chapter 3 11 2 5. Continue pressing down along the edges, working towards the top of the LCD Module. IMPORT ANT : If any of the clips do not readily sna p into place, check to make sure that none of the cables have been incorrectly routed and are blocking the cl ip.[...]
-
Page 123
11 3 Chapter 3 Main Unit Reassembly Process Replacing the LCD Module 1. Using both ha n ds, place the LCD Mod u le into the Lo w e r Co ver . 2. Replace the three screws on the rear of the Lo wer Cover to secure the LCD Module to the Lower Cover . Ste p Size Quantity Screw T ype LCD Module (red) M2.5*6 1 LCD Module (cyan) M2.5*8 2[...]
-
Page 124
Chapter 3 11 4 3. Insert the Microphone cable into the securing clips as shown. 4. Insert the Antenna cables into the cable channel on the Lower Cover as shown, push ing the cabl es through the penetration to the bottom of the cover . 5. Replace the adhesive strip to secure the WLAN cables in place.[...]
-
Page 125
11 5 Chapter 3 Replacing the CPU 1. Place the CPU into the socket. IMPORT ANT : Be sure to align the socket ma rker with the indica tor on the CPU. Th e socket is a Zero Insertion Force (ZIF) socket. If the CPU does not drop into the socket, check to make sure the s ocket is unlocked and the pins of the CPU ar straight. Never force a CPU into a ZIF[...]
-
Page 126
Chapter 3 11 6 2. Place the pads as shown. 3. Grasp the Thermal Module by the CPU heat si nk and place onto the Mainboard as shown.[...]
-
Page 127
11 7 Chapter 3 4. Insert the four screws to secure the Thermal Module to the Mainboard in the fol lowing order: 1, 2, 3, 4. Replacing the Fan 1. Place the fan onto the Mainboard. Ste p Size Quantity Screw T ype Thermal Module M2.5*6 4 1 2 3 4[...]
-
Page 128
Chapter 3 11 8 2. Insert the single screw to secure the fan to the Mainbo ard. 3. Connect the fan cable to the Mainboard . Ste p Size Quantity Screw T ype Fan M2.5*6 1[...]
-
Page 129
11 9 Chapter 3 Replacing the Mainboard 1. Connect the DC-In Cable to the mainboard. 2. Reach under the mainboard to plug in the L VDS cable. 3. Insert the Mainboard right side first, aligning the I/O ports with the Lower Cover .[...]
-
Page 130
Chapter 3 120 4. Insert the L VDS cable into the cable channel as shown. 5. Insert the DC-In cable into the securing clips as shown.[...]
-
Page 131
121 Chapter 3 6. Insert the two screws securing the Mainboard an d Fan to the Lower Cover as indicated. 7. Connect the Microphone Ca ble to the Ma inboard. Ste p Size Quantity Screw T ype Mainboard M2.5*5 2[...]
-
Page 132
Chapter 3 122 Replacing the I/O Board 1. Connect the I/O Board Cab le to the I/O Board. 2. Apply the adhesive to secure the I/O Board cable to the Lowe r Co ve r . 3. Insert the board into the lower cover so th e white tab is under the securing clip in the lower cover, taking care to align the screw holes.[...]
-
Page 133
123 Chapter 3 4. Insert the single screw to secure the I/O Board to the Lower Cover . 5. Connect the cable to the Mainboard. Ste p Size Quantity Screw T ype I/O Board M2.5*6 1[...]
-
Page 134
Chapter 3 124 6. Connect the FFC to th e Mainboard and clo se the locking latch . Replacing the Bluetooth Module 1. Insert the Bluetooth Module right side first and pres s do wn on the top to attach it to the Lower Cover . 2. Connect the cable to the Bluetooth Module.[...]
-
Page 135
125 Chapter 3 3. Connect the Bluetooth cable to the Mainboard. 4. Apply the adhesive to secure the cable in place . Replacing the Media Board 1. Insert the Media Board FFC thro ugh the cover as shown.[...]
-
Page 136
Chapter 3 126 2. Holding the mylar back, insert the Media Board under the securing clips in the upper cover and place on the upper cover so the aligning pin s are in the holes. 3. Adhere the mylar to the Media Board. 4. Place the securing bracket on the Media Board so the tab penetrates the slot on the media board.[...]
-
Page 137
127 Chapter 3 5. Insert the single screw to secure the Media Board to the Lowe r Cove r . Replacing the Speaker Modules 1. Place the right side speaker onto the Lower Cover as shown. Ste p Size Quantity Screw T ype Media Board M2.5*3 1[...]
-
Page 138
Chapter 3 128 2. Place the right side speaker into the Lower Cover and peel back the myl ar to expose the wire guides as shown. 3. Peel back the mylar and insert the S peaker Cable in to the cable chan nel. Ensure that the cable passes under all cable clips.[...]
-
Page 139
129 Chapter 3 4. Insert the four screws to secure the S peakers to the Upper Cover . Replacing the Power Board 1. Insert the Power Boa rd into the Lower Cover so the slot on th e Power Board hooks onto th e securing tab in the upper cover . IMPORT ANT : The FFC is soldered to the power board. T ake care when lifting to minimize bendin g of the conn[...]
-
Page 140
Chapter 3 130 3. Insert the single screw to secure the Power Board to the Lower Cover . Replacing the Touchpad Bracket 1. Slide the T ouchpad Bracket into the slots in the upper cover . Ste p Size Quantity Screw T ype Power Board M2.5*3 1[...]
-
Page 141
131 Chapter 3 2. Push the bracket down until it is secured unde r the tabs along the top edge. 3. Insert the single screw to secure the T ouchpad Bracket to the Upper Cover . Ste p Size Quantity Screw T ype T ouchPad Bracket M2*3 1[...]
-
Page 142
Chapter 3 132 Replacing the Button Board 1. Insert the Mainboard FFC through the co ver as shown. 2. Place the Button Board on the Upper Cover so that t he securing tab penetrates the slot on the Button Board, then slide the board forward as shown. 3. Adhere the FFCs to the upper cover .[...]
-
Page 143
133 Chapter 3 4. Connect the single FFC to the T ouchpad and close the securi ng latch. 5. Replace the four screws to secure the button board to the Upper Cover . 6. Replace the mylar sheet co vering the Button Board. Ste p Size Quantity Screw T ype Button Board M2*3 4[...]
-
Page 144
Chapter 3 134 Replacing the Upper Cover 1. Place the Upper Cover on the assembly bottom edge first. 2. S t arting at the bottom edge, press the edges o f the upper cover and lo wer cover together . An audible click signifies that the securing clips are engaged.[...]
-
Page 145
135 Chapter 3 3. Insert the six securing scr ews into the Upper Cover . 4. T urn the computer over and connect the following cables to the Mainboard: Ste p Size Quantity Screw T ype Upper Cover M 2.5*6 6[...]
-
Page 146
Chapter 3 136 a. Connect the Power Board FFC and close the locking latch as shown. b. Connect the S peaker Cable as sho wn. c. Connect the Button Board F FC and close th e locking latch as sho wn.[...]
-
Page 147
137 Chapter 3 d. Connect the Media Board FFC and close th e locking latch a s shown. e. Connect the Media Board FFC and close th e locking latch a s shown.[...]
-
Page 148
Chapter 3 138 5. T urn the computer over and insert the screws to secure the Upper Cover to the Lower Cove r . Replacing the Keyboard 1. Connect the FFC and close the Keyboard FFC securing latch as shown. Ste p Size Quantity Screw T ype Upper Cover M 2.5*8 18[...]
-
Page 149
139 Chapter 3 2. Insert the keyboard so that the bottom tabs enter the slots in the upper cover . 3. Press down on the edges of the keyboard. An audi ble click indicates that the securing clips have engaged.[...]
-
Page 150
Chapter 3 140 External Module Reassembly Process Replacing the WLAN Board 1. Insert the WLAN Board into the Mainb oard. 2. Insert the single screw to secure the WLAN Board in place. Ste p Size Quantity Screw T ype WLAN Board M2*3 1[...]
-
Page 151
141 Chapter 3 3. Connect the Antenna cabl es to the WLAN Board. NOTE: Cable placement is White to the AUX terminal (r ight) and Black to the MAIN terminal (left). IMPORT ANT : Ensure that t he cabl es are t ucked i nto the cha ssis to prevent them from being pinched when the lower covers are replaced. Replacing the DIMM Modules 1. Identify the SODI[...]
-
Page 152
Chapter 3 142 3. Press the DIMM down into the socket as shown. An au dible click indicates the DIMM is properly installed. 4. Insert a DIMM into Slot 1. 5. Press the DIMM down into the socket as shown. An au dible click indicates the DIMM is properly installed.[...]
-
Page 153
143 Chapter 3 Replacing the Hard Disk Drive Module 1. Place the HDD into the carrier . 2. Insert the four screws (two each side) to secure the hard disk to th e carrier . Carrier screw holes have been numbered 1-4. Insert the screws in numerical order: 1, 2, 3, 4. Ste p Size Quantity Screw T ype HDD Carrier M3*3 4[...]
-
Page 154
Chapter 3 144 3. Place the hard disk drive module into the bay . 4. Slide the HDD in the direction of the arrow to connect the HDD to the SA T A interface connector . 5. Insert the two screws to secure the HDD Module in place. Ste p Size Quantity Screw T ype HDD Module M2.5*4 2[...]
-
Page 155
145 Chapter 3 Replacing the ODD 1. Insert the hook on the ODD bezel as shown. 2. Slide the securing clip of the ODD bezel into the slot on the ODD module. An audible click indicates th e hook has engaged. 3. Insert the two screws to secure the ODD bracket in place. Ste p Size Quantity Screw T ype ODD Bracket M2*3 2[...]
-
Page 156
Chapter 3 146 4. Slide the ODD module into the assembly 5. Insert the screw to secure the ODD module. Ste p Size Quantity Screw T ype ODD Module M2.5*3 1[...]
-
Page 157
147 Chapter 3 Replacing the Lower Covers 1. Place the HDD cover over the HDD bay . Press until the six tabs in the door engage. 2. T ighten the two captive screws in the HDD Cover .[...]
-
Page 158
Chapter 3 148 3. Place the Memory Cover on the memory bay . 4. Press down until the seven clips in the cover snap into place.[...]
-
Page 159
149 Chapter 3 5. T ighten the two captive scr ews in the Memory Cover . Replacing the Battery 1. Slide the battery into the battery bay as shown.[...]
-
Page 160
Chapter 3 150 2. Slide the battery lock/unlock l atch to the lock posi tion.[...]
-
Page 161
151 Chapter 3[...]
-
Page 162
Chapter 4 152 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2[...]
-
Page 163
153 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llow ing actions one at a time to correct the problem. 1. Check the power cable is properly c[...]
-
Page 164
Chapter 4 154 No Display Issue If the Displa y doesn’t work, perform the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem. 1. Make sure that the internal display is selected. On[...]
-
Page 165
155 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, th e LCD is faulty and should be replaced. See “Disassembly Process” on page 52. 3. If extensive [...]
-
Page 166
Chapter 4 156 LCD Failure If the LCD fails, perform the following actions one at a ti me to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the pro blem. Do not replace a non-defective FRUs:[...]
-
Page 167
157 Chapter 4 Touchpad Failure If the To u c h p a d doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the probl em. Do not replace a non-defective FRUs:[...]
-
Page 168
Chapter 4 158 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager . Check the Device Manager to determine that: • The device is properly installed. • There are no[...]
-
Page 169
159 Chapter 4 Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Microphone Problems If internal or external Mic rophones do no op erate correctl y , perform the following actions one at a time to correct the problem. 1. Check that th[...]
-
Page 170
Chapter 4 160 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac ti ons one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free. 3. Run the Windows Vista S tartup Repair Utility: a. insert the Wind[...]
-
Page 171
161 Chapter 4 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits any of the following symptoms it may be faulty: • Audio CDs do not p lay when loaded • DVDs do not play when loaded • Blank discs do not burn cor[...]
-
Page 172
Chapter 4 162 4. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager . a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-cl ick on the device and click Enable . b. Double-click DVD/C D-RO M dri ves . If the device displays a down arrow , right-click on the device and clic[...]
-
Page 173
163 Chapter 4 a. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager . b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if[...]
-
Page 174
Chapter 4 164 USB Failure (Right side) If the rightside USB port fails, perform the following actio ns one at a time to correct the problem. Do not replace a non-defective FRUs:[...]
-
Page 175
165 Chapter 4 Wireless Function Failure If the WLAN/WiMAX fails, perform the fol lowing actions one at a time to correct the prob lem. Do not replace a non-defective FRUs: Start Reconne c t t h e Antenna to t he card Check Antenna t o WLAN/WiMAX C ar d Check Antenn a Swap the Ant enna Check WLAN/Wi MA X Card Swap WL AN/ WiMAX Card Check Function B [...]
-
Page 176
Chapter 4 166 Bluetooth Function Failure If the Bluetooth fails, perform the following actions one at a time to correct the problem. Do not replac e a non- defective FRUs: Easy Button Failure If the Media Boa rd fails, perform the following actions one a t a time to correct the problem. Do not replace a non-defective FRUs: Start Reconne c t t he ca[...]
-
Page 177
167 Chapter 4 Thermal Unit Failure If the Thermal Unit fails, perform the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: Start Reconne c t t he cable to th e Mainb oard Check Fan po w er cab le Check Fan Swap the Th erm al Mo dule CPU Heatin k w el l seated ? Seat it well Check CP U Swap C PU Swap Main[...]
-
Page 178
Chapter 4 168 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t th e problem. 1. T ry an alternative mouse. 2. If the mouse us es a wireless connecti on, insert new batteri es and confirm there is a goo d connection. See the mouse user manual. 3. If the mouse uses a USB connecti on, try an al[...]
-
Page 179
169 Chapter 4 Undetermined Problems The diagnostic proble ms does not identify which ad apter or device failed, which in stalled devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedure s to isolate the faili ng FRU (do not isolate non-defective FRU). NOTE: V eri fy th at all attached[...]
-
Page 180
Chapter 4 170 POST Code Tables These tables describe the POST code s and descriptions durin g th e POST . Sec NO_EVICTION_MODE_DEBUG EQU 1 (Comm onPlatformsecIa32SecCore.inc) Memory DEBUG_BIOS equ 1 (ChipsetAlvisoMemoryInitAsm IA32IMEMORY .INC) Post Code Description 0xC2 MTRR setup 0xC3 Enable cache 0xC4 Establish cache tags 0xC5 Enter NEM, [...]
-
Page 181
171 Chapter 4 DLL Timing Control Registers, RCOMP settings Post Code Description 0x27 Enable DRAM Chan nel I/O Buffers 0x28 Enable all clocks on populated rows 0x29 Perform JEDEC memory initia lization for all memory rows 0x30 Perform steps required after memory init 0x31 Program DRAM throttlin g and throttling event registers 0x32 Setup DRAM contr[...]
-
Page 182
Chapter 4 172 BDS & Specific action: Each PEIM entry point used in 80_PORT Post Code Description 0x00 Report the legacy boo t is hap pening 0x12 Wake up the Aps 0x13 Initialize SMM Private Data and relocate BSP SMBASE 0x21 PC init be gin at th e stage1 0x27 Report every memory range do th e hard ware ECC init 0x28 Report status code of every me[...]
-
Page 183
173 Chapter 4 Each Driver entry point used in 80_PORT 0xA8 PEI_SB_INIT 0x0C PEI_CAPSULE 0xAA PEI_PLA TFORM_ST AGE2 0xAC PEI_SB_SMBUS_ARP_DISABLED 0x0F PEI_HOST_TO_SYSTEM 0x40 PEI_MEMOR Y_INIT 0x41 PEI_S3_RESUME 0xAD PEI_CLOCK_GEN 0xAB PEI_OP_PRESENCE 0xAE PEI_FIND_FV 0x16 PEI_H2O_DEBUG_IO 0x17 PEI_H2O_DEBUG_COMM 0x16~0x1F PEI_RESERVED 0x20~0x2E PEI[...]
-
Page 184
Chapter 4 174 0xDB SA T A_CONTROLLER 0xDD SB_SM_BUS 0xE7 ISA_ACPI_DRIVER 0xE8 ISA_BUS 0xE9 ISA_SERIAL 0xED BUS_PCI_ UNDI 0xEC PCI_BUS 0xF6 BOOT_PRIO RITY 0xF7 FVB_SERVICE 0xF8 ACPI_PLA TFORM 0xFB PCI_HOT_PLUG 0xFC DXE_PLA TFORM 0xFD PLA TFORM_IDE 0x97 SMBIOS 0x98 MEMORY_SUB_CLASS 0x99 MISC_SUB_CLASS 0x82 CON_PLA TFORM 0x83 SA VE_MEMORY_CONFIG 0x84 [...]
-
Page 185
175 Chapter 4 Each SmmDriver entry point used in 80_PORT 0x87 TERMINAL 0x8A DA T A_HUB_S TD_ERR 0x7C F A T 0x7D P ARTIT ION 0x7E ENGLISH 0x7F FRENCH 0x9E HII_DA T ABASE 0x9F OEM_SETUP_BROWSER 0x8C OEM_BADGING_SUPPORT 0xF9 SETUP_MOUSE 0x72 MONITOR_KEY 0xBD PLA TFORM_BDS 0x8D RESERVED 0x8E RESERVED 0x8F RESERVED 0xA0 DXE_H2O_DEBUG_IO 0xB3 DXE_TPM_TCG[...]
-
Page 186
Chapter 4 176 0x92 SMM_IHISI 0x93 SMM_INT15_MICROCODE 0x94 SMM_PNP 0x95 SMM_INIT_PPM 0xD3 SMM_OEM_SERVICE Post Code Description[...]
-
Page 187
Chapter 5 177 Jumper and Connector Locations Top View ITEM DESCRIPTION ITEM DESCRIPTION JP2 Connect to IO/B (FFC) U61 Side-port memory (for UMA) JP3 Connect to CAP/B (FFC) U65 / U68 VRAM (for DIS) JP4 Connect to Bluetooth (Cable ) LED9 LED10 LED1 1 LED12 Battery Charging Indicator LED10 / LED12 AMB LED9 / LED1 1?Blue JP7 Connect to T ouch pad (FFC)[...]
-
Page 188
178 Chapter 5 Bottom View ITEM DESCRIPTION ITEM DESCRIPTION PJP1 Connect to Battery JREAD1 Card reader PJP2 DC-IN jack JCRT1 CRT Connector JDIM1 / JDIM2 DDR2 Memory socket JHDMI1 HDMI Connector JL VDS1 Connect to LED Panel JP13 F AN Connector JSA T A1 Connect to SA T A OD D JSA T A2 Connect to SA T A HDD JCPU1 CPU socket JMINI1 Connect to WLAN U3 N[...]
-
Page 189
Chapter 5 179 Clearing Password Check and BIOS Recovery This section provide you the standard operating proce dures of clearing password and BIOS recovery for Aspire 5538. Aspire 5538 provides one Hardwa re Open Ga p on main board for clearing password check, and one Hotkey for enabling BIOS Recovery . Clearing Password Check Hardware Open Gap Desc[...]
-
Page 190
180 Chapter 5 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed. BIOS Recovery Hotkey: The system [...]
-
Page 191
Chapter 6 181 FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Acer . Refer to this chapter whenever ordering for parts to repair or fo r RMA (Return Merchan dise Author ization). Please note that WHEN ORDERING FRU P ARTS, you should c heck the most up-to-date information [...]
-
Page 192
182 Chapter 6 Aspire 5538 Exploded Diagrams Main Assembly **Multiple Configuratio ns Available No. Description Acer P/N No. Des cription Acer P/N 1 Keyboard KB.I170A.0** 5 Fan 23.PEA02.001 2 Upper Cover 60.PEA02.001 6 Lower Cover 60.PEA02.002 3 Mainboard MB.PE902.001/ MB.PEA02.001 7 I/O Board 55.PEA02.004 4 Thermal Unit 60.PEA02.005 60.PE902.001 1 [...]
-
Page 193
Chapter 6 183 LCD Assembly No. Description Acer P/N No. Des cription Acer P/N 1 LCD Bezel 60.PEA02.004 6 L VDS Cable 50.PEA02.004 2 Left LCD Bracket 33.PEA02.005 7 Micropho ne and cable 23.PEA02.002 3 Camera 57.PEA02.001 8 Right LCD bracket 33.PEA02.005 4 LCD Panel LK.15608.003 9 LCD Cover 60.PEA02.003 5 WLAN Antenna 50.PEA02.005/ 50.PEA02.006 1 2 [...]
-
Page 194
184 Chapter 6 Aspire 5538 FRU List CA TEGOR Y Acer PN Acer Description ADAPTE R AP .065 01.027 Adapter DEL T A 65 W 19V 1.7x5.5x1 1 Y ellow (ADP-65MH B A) L V5, LF LF AP .06503.026 Adapter LI TE-ON 65W 19V 1.7x5. 5x1 1 Y ellow (P A-16 50- 22AG), L V5 LF AP .0650A.013 Adapter HIPRO 65W 19V 1.7x5.5x1 1 Y ellow (HP- A0653R3B 1LF), L V5 LF BA TTERY BT [...]
-
Page 195
Chapter 6 185 55.PEA02.002 POWER BOAR D 55.PEA02.003 TP BOARD 55.PEA02.004 IO BOARD BH.21 100.004 Foxconn Bluetooth BRM 2046 BT2.1 (T60H928.3 3) f/ w:861 BT .21 100.005 F OXC ONN BLUETOOTH FOX_BRM_2.0 F/W 300 NI.23600.007 Foxconn FOX_A TH_XB63 Foxco nn Ath eros XB63 minicard b/g NI.23600.030 Foxconn Wireless L AN Atheros AR5B91 1x2 BGN NI.23600. 03[...]
-
Page 196
186 Chapter 6 50.PEA02.004 LCD CABLE 50.PEA02.005 AN TENNA WL AN 50.PEA02.006 AN TENNA WL AN-AUX L CASE/COVER/BRACKET ASSEMBL Y 33.PEA02.001 TP BR ACKET 33.PEA02.002 HDD BRACKET 33.PEA02.003 CAP SENSOR BRACKET 33.PEA02.004 ODD BRACKET 33.PEA02.005 LCD HINGE R&L 42.PEA02.001 R A M DOOR 42.PEA02.002 HDD DOOR 42.PEA02.003 ODD BEZEL-SM 60.PEA02.001[...]
-
Page 197
Chapter 6 187 60.PEA02.002 L OWER CASE 60.PEA02.003 LCD COVER 60.PEA02.004 LCD BEZEL CPU/PROCESSOR KC.AL002.1 10 CPU AMD Athlon L1 10 PGA 1.2G 512K singl e core KC.AL002.310 CPU AMD Athlon L310 PGA 1.2G 1M Dual Core KC.A TF02.200 CP U AMD Athlon TF20 PGA 1.6 G 512K 638 15W G2 DIGIT AL LIGHT DEVICE 57.PEA02.001 CAMERA 1.0M DVD RW DRIVE 6M.PEA02.001 [...]
-
Page 198
188 Chapter 6 KH.25007.015 HDD HGST 2 .5" 5400rpm 25 0GB HTS545025B9A 300 Panther B SA T A LF F/W:C60F KH.25008.021 HDD WD 2.5" 5400rpm 250GB WD2500BEVT -22ZCT0 ML160 SA T A LF F/W:1 1.01A1 1 KH.32001.008 HDD SEAGA TE 2.5" 5400rpm 320GB ST932032 0AS Crockett SA T A LF F/W:0303 KH.32004.002 HDD TOSHIBA 2.5" 5400rpm 320GB MK3255GS[...]
-
Page 199
Chapter 6 189 KB.I170A.039 Ke yboard ACER AC7T JV50 Internal 17 St andard 104KS Black French T exture KB.I170A.040 Ke yboard ACER AC7T JV50 Internal 17 St andard 104KS Black German T exture KB.I170A.041 Ke yboard ACER AC7T JV50 Internal 17 St andard 103KS Black Greek T exture KB.I170A.042 Ke yboard ACER AC7T JV50 Internal 17 St andard 104KS Black H[...]
-
Page 200
190 Chapter 6 LK.15606.004 LED LCD SAMSUNG 15.6"W WXGA Glare L TN156A T06- A01 LF 200nit 16ms LK.15608.003 LED LCD LP L 15.6"W WXGA Glare LP156WH3-TLA1 LF 200nit 8ms 500:1 MAINBOARD MB.PE902.001 Mainboard AS5538 A T I RS780 SB710 Acer Logo LF UMA MB.PEA02.001 Mainboard AS5538G A TI RS780 SB710 512M-GD3 Acer Logo W/O 1394 V1.0 LF M92LP MEM[...]
-
Page 201
Chapter 6 191 Screw List Acer P/N Description 86.PEA02.001 SCR EW M2 .4 6D 3.0LK 5.5D 0. 8T ZKNL 86.PEA02.002 SCREW M2D 3L K 3.05D NI NL 86.PEA02.003 SCR EW M2 .4 8D 4.0LK 5.5D 0. 8T ZKNL 86.PEA02.004 SCREW M2.5D 4.15LK 5.5D ZK NLCR3 86.PEA02.005 EAX20_HDD_ERING_SCREW_CLIP 86.PEA02.006 SCR EW M2 .4 5D 8.0LK 5.5D 0. 8T ZKNL 86.PEA02.007 SCR EW M2 .4[...]
-
Page 202
Appendix A 192 Model Definition and Configuration Aspire 5538 Series Model RO Country Acer Part No Description AS5538- 1 13G25Mn EMEA Eastern Europe LX.PE90C.001 AS5538-1 13G25Mn LI NPUSAEU7 UMACss 2G+1G/250/BT/6L/5R/CB_bgn_0.3D_AN_ENQ1 AS5538- 314G32Mn EMEA Middle East LX.PE90C.002 AS5538-314G32Mn LINPUSAME4 UMACss 2*2G/ 320/BT/6L2.2/5R/CB_bgn_0.3[...]
-
Page 203
193 Appendix A AS5538- 1 13G25Mn EMEA Gr eece LX.PE90X.016 AS5538-1 13G25Mn VHP32A TGR1 MC UMACss 2G+1G/250/6L/5R/CB_bgn_0.3D_AN_EL32 AS5538- 1 13G25Mn EMEA Spain LX.PE90X.017 AS5538-1 13G25Mn VHP32A TES1 MC UMACss 2G+1G/250/6L/5R/CB_bgn_0.3D_AN_ES22 AS5538- 1 13G25Mn EMEA Por tugal LX.PE90X.018 AS5538-1 13G25Mn VHP32A TPT1 MC UMACss 2G+1G/250/6L/5[...]
-
Page 204
Appendix A 194 AS5538- 1 13G25Mn EMEA Sou th Africa LX.PE90X.042 AS5538-1 13G25Mn EM VHP32 A TZA1 MC UMACss 2G+1G/250/6L/5R/ CB_bgn_0.3D_AN_FR23 AS5538- 1 13G25Mn EMEA Sou th Africa LX.PE90X.043 AS5538-1 13G25Mn EM VHP32 A TZA2 MC UMACss 2G+1G/250/6L/5R/ CB_bgn_0.3D_AN_EN16 AS5538- 1 13G32Mn EMEA N orway LX.PE90X.044 AS5538-1 13G32Mn VHP32A TNO1 MC[...]
-
Page 205
195 Appendix A AS5538G- 313G32Mn EMEA Middle East LX.PEA0X.01 1 AS5538G-313G32Mn EM VHP32A TME2 MC M92LP512Css_V3 2G+1G/320/6L/5R/ CB_bgn_0.3D_AN_EN15 AS5538G- 313G32Mn EMEA Middle East LX.PEA0X.012 AS5538G-313G32Mn EM VHP32A TME6 MC M92LP512Css_V3 2G+1G/320/6L/5R/ CB_bgn_0.3D_AN_EN15 AS5538G- 313G32Mn EMEA Middle East LX.PEA0X.013 AS5538G-313G32Mn[...]
-
Page 206
Appendix A 196 AS5538G- 313G32Mn EMEA Czech LX.PEA0X.030 AS5538G-313G32Mn VHP32A TCZ2 MC M92LP512Css_V3 2G+1G/320/6L/5R/ CB_bgn_0.3D_AN_SK12 AS5538G- 313G32Mn EMEA Norway LX.PEA0X.031 AS5538G-313G32Mn VHP32A TNO3 MC M92LP512Css_V3 2G+1G/320/6L/5R/ CB_bgn_0.3D_AN_ENS3 AS5538G- 313G32Mn EMEA Norway LX.PEA0X.032 AS5538G-313G32Mn VHP32A TNO3 MC M92LP51[...]
-
Page 207
197 Appendix A AS5538- 1 1 1G25Mn CHIN A Hong Kong LX.PEB0Y .001 AS5538-1 1 1G25Mn VHB32A THK2 MC UMAss 1*1G/250/6L/5R/CB_bgn_AN_ZH31 AS5538- 1 1 1G25Mn CHINA China LX.PEB0Y .002 AS5538-1 1 1G25Mn VHB32A TCN1 MC UMAss 1*1G/250/6L/5R/CB_bgn_AN_SC1 1 AS5538- 312G25Mn WW GCTWN S2.PE90C.001 AS5538-312G25Mn LINPUSA WW1 UMACss 2*1G/250/BT/6L/5R/CB_bgn_1.[...]
-
Page 208
Appendix A 198 AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G25Mn AAL1 10 NLED15.6WXGAGS UMA N AS5538-1 13G2[...]
-
Page 209
199 Appendix A AS5538G-313G32Mi AAL310 NLED15.6W XGAGS M9 2LP 512M-DDR3 (64*16*4) AS5538G-313G32Mn AAL310 NLED15.6W XGAGS M9 2LP 512M-DDR3 (64*16*4) AS5538G-313G32Mn AAL310 NLED15.6W XGAGS M9 2LP 512M-DDR3 (64*16*4) AS5538G-313G32Mn AAL310 NLED15.6W XGAGS M9 2LP 512M-DDR3 (64*16*4) AS5538G-313G32Mn AAL310 NLED15.6W XGAGS M9 2LP 512M-DDR3 (64*16*4) [...]
-
Page 210
Appendix A 200 AS5538-1 13G25Mn SO2GBII6 SO1GBII6 N250GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538-1 13G25Mn SO2GBII6 SO1GBII6 N250GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538-1 13G25Mn SO2GBII6 SO1GBII6 N250GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538-1 13G25Mn SO2GBII6 SO1GBII6 N250GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538-1 13[...]
-
Page 211
201 Appendix A AS5538G-313G32Mn SO2GBII6 SO1GBII6 N320GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538G-313G32Mn SO2GBII6 SO1GBII6 N320GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538G-313G32Mn SO2GBII6 SO1GBII6 N320GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538G-313G32Mn SO2GBII6 SO1GBII6 N320GB5.4 KS NSM8XS9.5 McAfee 5 in 1-Built in AS5538G-313[...]
-
Page 212
Appendix A 202 AS5538G-312G25Mn SO1GBII6 SO1GBII6 N250GB5.4KS NSM8XS9.5 N 5 in 1-Built in AS5538-312G25Mn SO1GBII6 SO1GBII6 N250GB5.4KS NSM8XS9.5 N 5 in 1-Built in Model Wireless LAN Wireless LAN1 BT OS OS-Country Kit K/B AS5538- 1 13G25Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN BT 2.1 LINPUS LINPUSAEU7ENQ1 SLO/CRO (KB.I170A.049) AS5538- 314G32Mn 3rd WiF[...]
-
Page 213
203 Appendix A AS5538- 1 13G25Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TFI2FI1 1 Sweden (KB.I170A.051) AS5538- 1 13G25Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TEU5RO12 US International (KB.I170A.056) AS5538- 1 13G25Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TEU3RU23 Russian (KB.I170A.048) AS5538- 1 13G25Mn 3rd WiFi 1x[...]
-
Page 214
Appendix A 204 AS5538- 1 13G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TNO1NO1 2 Norwegian (KB.I170A.046) AS5538- 1 14G25Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TES1ES22 Sp anish (KB.I170A.050) AS5538- 1 14G50Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TES1ES22 Sp anish (KB.I170A.050) AS5538- 312G25Mn 3rd WiFi 1x2 BGN[...]
-
Page 215
205 Appendix A AS5538G- 313G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TFI2FI1 1 Sweden (KB.I170A.051) AS5538G- 313G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A THU1HU13 Hungarian (KB.I170A.042) AS5538G- 313G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TPT1P T12 Portuguese (KB.I170A.047) AS5538G- 313G32Mn 3rd WiFi 1x2 B[...]
-
Page 216
Appendix A 206 AS5538G- 313G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TZA1FR23 F rench (KB.I170A.039) AS5538G- 313G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TZA2EN16 US International (KB.I170A.056) AS5538G- 313G32Mn 3rd WiFi 1x2 BGN 3rd WiFi 1x2 BGN N VHP32 VHP32A TNO1NO1 2 Norwegian (KB.I170A.046) AS5538G- 312G32Mn 3rd WiFi[...]
-
Page 217
207 Appendix A[...]
-
Page 218
Appendix B 208 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of it s system functions are tested under Windows ® XP Home, Windows ® XP Pro environment. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests. Rega[...]
-
Page 219
209 Appendix B Windows XP Environment Test V endor Ty p e Des cription Adapter DEL T A 65W Adapter DEL T A 65W 19V 1.7x5.5x1 1 Y ellow (ADP-65MH B A) L V 5, Timeline LF LF HIPRO 65W Adapter HIPRO 65W 19V 1.7x5.5x1 1 Y ellow (HP- A0653R3B 1LF), L V5 Timeline LF LITE-ON 65W Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ellow (P A-1650-22AG), L V5 Timeline LF[...]
-
Page 220
Appendix B 210 CPU AMD AAL1 10 CPU AMD Athlon L1 10 PGA 1.2G 512K single core AMD AAL310 CPU AMD Athlon L310 PGA 1.2G 1M Dual Core AMD AA TF20 CPU AMD Athlon TF 20 PGA 1.6G 512K 638 15W G2 HDD HGST N160GB5.4K S HDD HGST 2.5" 5400rpm 160GB HTS545016B9A300 Panther B SA T A LF F/ W:C6 0 F HGST N250GB5.4K S HDD HGST 2.5" 5400rpm 250GB HTS5450[...]
-
Page 221
21 1 Appendix B AUO NLED15.6WX GAGS LED LCD AUO 15.6"W WXGA Glare B156XW03 V1 LF 220nit 8ms 500:1 LPL NLED15.6WX GAGS LED LCD LPL 15.6"W WXGA Glare LP156WH3- TLA1 LF 200nit 8ms 500:1 SAMSUNG NLED15.6WX GAGS LED LCD SAMSUNG 15.6"W WXGA Glare L TN156A T07-A01 LF 200nit 16ms Memory HYNIX SO1GBII6 Memory HYNIX SO-DIMM DDRII 667 1GB HYMP1[...]
-
Page 222
Appendix C 212 Online Support Information This section describe s online techni cal support services a vailable to help you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Unit s may access our website. However [...]
-
Page 223
213 A Antennas Removing 101 Replacing 103 B Battery Replacing 149 Battery Pack Removing 45 BIOS ROM type 19 vendor 19 Version 19 BIOS Utility 23 – 34 Advanced 28 Boot 32 Exit 33 Navigating 23 Power 31 Save and Exit 33 Security 28 System Security 33 Bluetooth Mo du le Removing 77 Replacing 124 Board Layout Top View 177 brightness hotkeys 13 Button[...]
-
Page 224
214 Internal Microphone Fail ure 159 Internal Power Cable 81 Internal S peaker Failure 157 J Jumper and Connector Locati ons 177 Top View 177 K Keyboard Removing 60 Replacing 138 Keyboard Failure 156 L LCD Bezel Removing 92 Replacing 110 LCD Brackets Removing 98 Replacing 106 LCD Cable Removing 96 , 107 LCD Failure 156 LCD Module Disassembly 91 Rea[...]
-
Page 225
215 T ouchpad Failure 157 T roubleshooting Built-in KB Failure 156 Internal Micr ophone 159 Internal Speakers 157 LCD Failure 156 No Display 154 Other Failures 168 Thermal Unit 167 Touchpad 157 USB 164 WLAN 165 U Undetermined Prob lems 169 Upper Cover Removing 62 Replacing 134 USB Failure (Rightside) 164 utility BIOS 23 – 34 V volume hotkeys 13 W[...]
-
Page 226
216[...]