Acer TravelMate 7000 manuel d'utilisation

TravelMate 7000 User’s Manual[...]

ii Copyright Copyright © 1997 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prio[...]

iii IMPOR TANT SAFETY INSTRUCTIONS 1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product n[...]

iv 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or[...]

v Concerning Lithium Batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til leverandøren. A D V A R S E L Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av appar[...]

vi FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can [...]

vii About This Manual Purpose This manual discusses the features of the notebook and tells how to use and configure it. Manual Structure This manual consists of eight chapters and two appendices: Chapter 1, Getting Started , tells you how to get started with the notebook. Chapter 2, System Tour , gives a guided and in-depth “tour” of the notebo[...]

viii Conventions The following conventions are used in this manual: C:setup , [Enabled] , etc. Represent text input by the user, default settings and recommended selections message displayed Denotes actual messages that appear on screen b , e , r , etc Represent the actual keys that you have to press on the keyboard NOTE Gives bits and pieces of a[...]

ix Table of Contents 1 Getting Started 1.1 Item Checklist ....................................................................................... 1-2 1.2 Taking Care of Your Computer .............................................................. 1-3 1.2.1 Notebook .................................................................................. 1-[...]

x 2.6 Storage ............................................................................................... 2-20 2.6.1 Hard Disk ................................................................................ 2-20 2.6.2 Module Bay ............................................................................ 2-20 2.7 Ports ........................[...]

xi 3.2 Power Management ............................................................................ 3-10 3.2.1 The Concept of Heuristics ....................................................... 3-10 3.2.2 Suspend Modes ...................................................................... 3-11 3.2.3 Advanced Power Management (A PM) ................[...]

xii 5 Software 5.1 System Software ................................................................................... 5-2 5.2 Sleep Manager ...................................................................................... 5-3 5.2.1 Accessing the Sleep Manager ................................................... 5-3 5.2.2 Sleep Manager Function[...]

xiii 6.4.10 Onboard Audio ....................................................................... 6-15 6.4.11 Reset PnP Resources ............................................................. 6-16 6.5 Power Saving Options ......................................................................... 6-17 6.5.1 When Lid is Closed ........................[...]

xiv 8 Troub leshooting 8.1 Q & A .................................................................................................... 8-2 8.2 POST Error Messages .......................................................................... 8-7 A Specifications B Address and Interrupt Tables B.1 System Memory Map ...................................[...]

xv List of Figures 1-1 Write-protecting a 3.5-inch Diskette ...................................................... 1-8 2-1 Display .................................................................................................. 2-5 2-2 Indicator Lights ...................................................................................... 2-7 2-3 [...]

xvi List of Tables 2-1 Indicato r Status Descriptions ................................................................. 2-7 2-2 Lock Key Descriptions ........................................................................... 2-9 2-3 Using the Embedded Keypad .............................................................. 2-10 2-4 Windows 95 Key Des[...]

xvii 8-1 POST Error Messages .......................................................................... 8-7[...]

Getting Started 1- 1 Chapter 1 Getting Started Congratulations on your purchase of the award-winning TravelMate 7000 notebook computer. Guaranteed and backed by Acer’s world-class support, you can be sure of top-notch performance with your new AcerNote. This chapter guides you through the first few steps on setting up your notebook computer.[...]

1- 2 User’s Manual 1.1 Item Checklist Carefully unpack the carton and remove the contents. If any of the following items is missing or damaged, contact your dealer immediately. • Notebook computer • Accessory box • AC adapter • Battery pack • Floppy drive module • External floppy drive cable • User’s manual and other documentation[...]

Getting Started 1- 3 1.2 Taking Care of Your Computer Your computer will serve you well if you take care of it. This section tells you how to care for the notebook. Also, re-read the important safety instructions at the beginning of this manual. 1.2.1 Notebook • Do not expose the notebook to direct sunlight. Do not place near sources of heat, suc[...]

1- 4 User’s Manual • Do not subject the notebook to magnetic fields. • Do not expose the notebook to rain or moisture. • Do not spill water on the notebook. • Do not subject the computer to heavy shock and vibration.[...]

Getting Started 1- 5 • Do not expose the notebook to dust and dirt. • Never place objects on top of the notebook to avoid damaging the notebook. • Never place the notebook on uneven surfaces.[...]

1- 6 User’s Manual 1.2.2 AC Adapter The AC adapter provides uninterrupted power to your notebook and charges your battery pack. Here are some ways of taking care of your AC adapter. • Do not connect the adapter to any other device. • Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cabl[...]

Getting Started 1- 7 1.2.4 Cleaning and Servicing When cleaning the notebook, follow these steps: 1. Close the display lid to turn the notebook off. 2. Disconnect the AC adapter. 3. Remove the battery pack. 4. Use a soft cloth moistened with wa ter. Do not use liquid or aerosol cleaners. Contact your dealer or see your service technician if any of [...]

1- 8 User’s Manual • Write-protect your diskettes to prevent accidental erasure. To do this, slide the write-protect tab to the write-protect position. Figure 1-1 Write-protecting a 3.5-inch Diskette • When you put a label on a 3.5-inch diskette, make sure that the label is properly attached (flat on the surface) and within the labelling area[...]

Getting Started 1- 9 1.3 Connecting the Notebook After reading through the previous section, you are now ready to experience your new notebook. Connecting the notebook is as easy as 1-2-3. Inserting the Battery Pack Insert the battery pack into the battery compartment and slide the battery compartment cover in place. Connecting the AC Adapter Conne[...]

1- 10 User’s Manual 1.4 Getting Help Online This user’s manual provides clear and concise information about the notebook, so read it thoroughly. To provide you with help when traveling, the notebook has a comprehensive online help. Accessing Online Help Follow these steps to access the online documentation: 1. Press the Windows logo button or C[...]

System Tour 2- 1 Chapter 2 System Tour This notebook combines high-performance, versatility, multimedia capabilities and a truly advanced power management system in a unique human-centric and stylish design case. Work with unmatched productivity and reliability with your new power computing partner. This chapter gives an in-depth “tour” of the [...]

2- 2 User’s Manual 2.1 Features The notebook looks as good inside as it is outside, definitely designed with the user in mind. Here are just a few of the notebook’s many features: Performance • High-end mobile Pentium microprocessor • 64-bit main memory and 256KB external (L2) cache memory • Large display in DualScan STN or active-matrix [...]

System Tour 2- 3 Human-Centric Design and Ergonomics • Intuitive FlashStart automatic power-on • Sleek, smooth and stylish design • Automatic tilt-up, full-sized, full-function keyboard • Wide and comfortable palm rest • Ergonomically-centered touchpad pointing device Expansion • PC Card (formerly PCMCIA) slots (two type II/I or one typ[...]

2- 4 User’s Manual 2.2 Display The large graphics display offers excellent viewing, display quality and desktop performance graphics. The notebook supports two different displays — DualScan STN or active-matrix TFT LCD. Video Performance PCI local bus video with 128-bit graphics acceleration boost your video to desktop-performance level, and al[...]

System Tour 2- 5 display is closed. FlashStart Automatic Power-On A noticeably unique feature about this notebook is that it has no on/off switch. Instead it employs a lid switch, located near the center of the display hinge, that tells the notebook when it should wake up or go to sleep. Figure 2-1 Display When you close the display lid, the notebo[...]

2- 6 User’s Manual The “Lid Closed” State When the lid is closed (i.e., the “lid closed” state), the notebook suspends its normally busy tasks to make itself electronically and mechanically more stable. When the lid is opened, the notebook briefly checks its environment and always re-initializes devices newly added in or removed from the [...]

System Tour 2- 7 2.3 Indicator Lights Two indicator lights are found on the display panel. Figure 2-2 Indicator Lights These indicators and their descriptions are shown in Table 2-1. Table 2-1 Indicator Status Descriptions Icon Indicator Light Description Power Indicator • Lights when power is on • Flashes when the notebook is in suspend-to- me[...]

2- 8 User’s Manual 2.4 Keyboard The full-sized keyboard includes an embedded keypad, separate cursor keys, two Windows 95 keys and twelve function keys. Special keys are highlighted in different colors. 2.4.1 Keyboard Layout US UK Figure 2-3 Keyboard Layout[...]

System Tour 2- 9 2.4.2 Special Keys Lock Keys The notebook has the three basic lock keys which you can toggle on and off. Some keys may require using as part of a key combination. Table 2-2 Lock Key Descriptions Key Description @ When Caps Lock is on, all alphabetical characters typed appear in uppercase. - When Num Lock is on, the embedded keypad [...]

2- 10 User’s Manual Embedded Keypad The embedded keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, the cursor-control key symbols are not printed. Table 2-3 tells how to use the embedded keypad. Table 2-3 Using the Embedded Keypad [...]

System Tour 2- 11 Windows 95 Keys The keyboard has two keys that perform Windows 95-specific functions. Table 2-4 Windows 95 Key Descriptions Key Description Windows logo key Start button. Combinations with this key performs special functions. Below are a few examples: • Windows + Tab Activate next Taskbar button • Windows + E Explore My Comput[...]

2- 12 User’s Manual Hot Keys The notebook uses hot keys (key combinations) to access most of the notebook’s controls like screen contrast and brightness, volume output and the BIOS setup utility. Some hot keys will pop-up a corresponding icon onscreen for better visuals. When activating hot keys, press and hold the first key before pressing the[...]

System Tour 2- 13 Table 2-5 Hot Key List (continued) Hot Key Icon Function Description - p Display Toggle Switches display from LCD to CRT to both LCD and CRT - q Fuel Gauge On/Off Toggles battery gauge display on/off. Also shows the following: • “plug” icon if a powered AC adapter is connected to the notebook. • “speaker” icon if speak[...]

2- 14 User’s Manual Table 2-5 Hot Key List (continued) Hot Key Icon Function Description - - x Contrast Up Increases screen contrast (DSTN only) - - z Contrast Down Decreases screen contrast (DSTN only) - w Fuel Gauge Up With the fuel gauge onscreen, moves the fuel gauge up - y Fuel Gauge Down With the fuel gauge onscreen, moves the fuel gauge do[...]

System Tour 2- 15 The eject menu commands allow you to perform various eject-related functions for the notebook. See the following table for details Table 2-6 Eject Menu Descriptions Select… To… Battery Change the battery. This option forces the notebook to enter suspend-to-disk mode, so that you can replace the battery with a charged one, and [...]

2- 16 User’s Manual 2.4.3 Automatic Tilt Feature The keyboard has the option of automatically tilting to a six-degree angle whenever you open the lid. This automatic tilt feature brings to the notebook the comfortable typing angle provided in standard PC desktop keyboards. Together with the palm rest (discussed in the following section), these tw[...]

System Tour 2- 17 3. Open the lid. 2.4.4 Palm Rest Located below the keyboard, the wide and curved palm rest gives you a comfortable place to rest your hands while you type. Figure 2-4 Palm Rest[...]

2- 18 User’s Manual 2.5 Touchpad The ergonomically-centered touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. Figure 2-5 Touchpad The touchpad works with most mouse drivers. However, the touchpad driver supports special functions that work uniq[...]

System Tour 2- 19 Touchpad Basics The following two items teach you how to use the touchpad: • Move your finger across the touchpad to move the cursor. • Press the left and right buttons located on the lower edge of the touchpad to do selection and execution functions. These two buttons are similar to the left and right buttons on a mouse. Tapp[...]

2- 20 User’s Manual 2.6 Storage 2.6.1 Hard Disk High-capacity storage comes in the form of a 2.5-inch Enhanced-IDE hard disk. The hard disk can be upgraded when you need more storage space. See section 4.9.2 for related information. 2.6.2 Module Bay The notebook’s flexible module bay accommodates either a high-speed CD-ROM drive module or a 3.5[...]

System Tour 2- 21 Swapping Modules The proper way to cleanly swap or interchange modules is to power off the notebook without the help of any suspend modes. The notebook needs to perform a “cold boot” (Windows 95 shutdown or via the Eject menu) or “warm boot” (Ctrl-Alt-Del) to correctly detect and identify the module currently installed in [...]

2- 22 User’s Manual Ejecting a CD To eject a CD, press the eject button on the CD-ROM drive, press - 1 , or use your software to eject the CD-ROM drive. In Windows 95, you can right-click on the CD-ROM drive icon and select the Eject command. Using the Floppy Drive Module Externally You can use the floppy drive module externally when a CD-ROM dri[...]

System Tour 2- 23 2.7 Ports Ports allow you to connect peripheral devices to your notebook computer as you would with a desktop PC. The ports are found on the left and rear panel. The following sections discuss these ports and their functions. See Chapter 4 on how to connect external devices to the notebook. 2.7.1 Left Panel Ports Multimedia ports [...]

2- 24 User’s Manual Table 2-8 describes these ports. Table 2-8 Left Panel Port Descriptions # Icon Port Connects to... 1 PC Card slots One Type III or two Type I/II PC cards 2 Microphone-in/Line-in External microphone or line input device 3 Speaker-out/Line-out Amplified speakers or headphones PC Card Slots There are two type II/I or one type III[...]

System Tour 2- 25 Ejecting a Card 1. Exit the application using the card. 2. Flip out the slot eject button of the slot where the card is inserted. 3. Press the slot eject button to eject the card. If you want to install a card, refer to your card’s user’s manual for details on how to install and use the card. Multimedia Ports Connecting extern[...]

2- 26 User’s Manual 2.7.2 Rear Panel Ports The rear panel includes the notebook’s main ports and connectors. See Figure 2-8. 1 DC-in Port 5 Mini Dock Connector 2 PS/2 Port 6 External CRT Port 3 Serial Port 7 RJ-11 Phone Jack 4 Parallel Port 8 Infrared Port Figure 2-8 Rear Panel Ports 1 2 3 4 5 6 7 8[...]

System Tour 2- 27 Table 2-9 describes these ports. Table 2-9 Rear Panel Port Descriptions # Icon Port Connects to... 1 DC-in port AC adapter and power outlet 2 PS/2 port PS/2-compatible device (e.g., PS/2 keyboard, keypad, mouse) 3 Serial port (UART16650-compatible) Serial device (e.g., serial mouse) 4 Parallel port (EPP/ECP-compliant) Parallel dev[...]

2- 28 User’s Manual 2.8 Audio Standard notebook configuration includes 16-bit stereo audio with built-in FM synthesizer. Combined with the dual, angled speaker system and built- in sensitive microphone, this notebook redefines portable audio. 2.8.1 Built-in Speakers and Microphone The dual, angled speakers found on both sides of the display hinge[...]

System Tour 2- 29 2.8.2 Controlling the Audio There are hot keys that allow you to control various aspects of the audio output. The following table lists the audio-specific hot keys: Table 2-10 Audio Control Hot Keys Hot Key Icon Function Description - r Speaker On/Off Toggles speaker output on and off - b - w Volume Up Increases audio volume - b -[...]

2- 30 User’s Manual 2.9 Communications 2.9.1 Serial Infrared This notebook has an SIR (serial infrared) port located on the rear panel. Wireless communication support allows you to transfer data to SIR-”aware” machines without the aid of cables. Not only can you transfer data between two SIR-capable computers, you can also send data to SIR-?[...]

System Tour 2- 31 2.9.2 Fax/Data Mo dem 1 The notebook has an optional state-of-the-art, 28.8Kbps V.34 fax/data modem that supports V.42bis hardware compression (115.2 kilobits per second). The modem also supports DSVD (simultaneous voice over data) technology which allows you to send data and talk at the same time. Using the Modem Connect the phon[...]

2- 32 User’s Manual 2.10 Securing your Notebook Security features include hardware and software locks — a security notch and a two-level password scheme. 2.10.1 Security Notch A security notch located on the left panel of the notebook lets you connect a standard key-based computer security lock. Circle or wrap a computer security lock cable aro[...]

Power 3- 1 Chapter 3 Power The notebook operates on AC or battery power. This chapter contains the information you need to know to operate the notebook on battery power. The chapter also includes information about the unique power management system.[...]

3- 2 User’s Manual 3.1 Battery P ower The notebook uses a single high-capacity Lithium-Ion smart battery pack that gives you longer use between charges. 3.1.1 Battery Pack Characteristics The battery pack has the following characteristics: • Lithium-Ion Technology Lithium-Ion technology does not have the memory effect problem of Nickel Cadmium [...]

Power 3- 3 notebook in suspend-to-memory mode. Do not expose battery packs to temperatures below 0ºC (32ºF) or above 60ºC (140ºF). This may adversely affect the battery pack. 3.1.2 Removing and Installing the Battery Pack Removing the Battery Pack Before removing the battery pack, make sure that you have an AC adapter connected to the notebook;[...]

3- 4 User’s Manual Insert the battery pack into the battery compartment and slide in the battery compartment cover.[...]

Power 3- 5 3.1.3 Charging the Battery To charge the battery, place the battery pack inside the battery compartment and plug the AC adapter into the notebook and an electrical outlet. Charging Modes The adapter has three charging modes: • Rapid charge mode The notebook uses rapid charging when the notebook is in suspend mode and a powered AC adapt[...]

3- 6 User’s Manual 3.1.4 Checking the Batt ery Level There are three ways to check the battery charge level: • Onscreen fuel gauge • Windows 95 battery indicator • Battery pack gauge The fuel gauge shows the minimum guaranteed capacity to provide assurance that the system will be operational for the minimum battery life indicated. Using the[...]

Power 3- 7 Using the Battery Pack Gauge The battery pack gauge allows you to check your battery charge level even when it is not installed in the notebook. Press the fuel gauge button on the battery pack to check the battery charge level. Table 3-1 is a battery-level chart. Table 3-1 Battery-level Chart Battery LEDs LEDs Lit Charge Level lllll five[...]

3- 8 User’s Manual 3.1.5 Optimizing Battery Life Optimizing battery life prolongs the charge/recharge cycle and improves recharge efficiency. Follow these suggestions to optimize and maximize battery power: • Purchase an extra battery pack. • Set the When Lid is Closed parameter in Setup to [Suspend to Disk] . See section 6.5.1. • Use the A[...]

Power 3- 9 3.1.6 Battery Low Condition You never have to worry about battery power as long as you are using the AC adapter. However, when you operate the notebook on battery power, pay extra attention to the battery indicator ( ). Generally speaking, a battery-low condition occurs when less than twenty percent charge left is in the battery. The fol[...]

3- 10 User’s Manual Table 3-2 lists the recommended course of action when you encounter a battery-low condition. Table 3-2 Course of Action for Battery-low Condit ion Situation Recommended Action AC adapter and power outlet available 1. Connect the AC adapter to the notebook to begin charging the battery. 2. Resume work. If you want the battery t[...]

Power 3- 11 3.2 Power Management At the very heart of this notebook is a new way of power management called Heuristic Power Management (HPM). Part of the notebook’s overall design, this power management method allows the notebook to provide maximum power conservation and maximum performance. 3.2.1 The Concept of Heuristics Current power managemen[...]

3- 12 User’s Manual 3.2.2 Suspend Modes The heuristic power management system performs automatic suspend, hot- key suspend and all suspend actions resulting from various events and conditions. You only need to set the suspend mode type the notebook enters when a suspend condition occurs. The two suspend modes are: • Suspend-to-memory mode • S[...]

Power 3- 13 When battery runs out of power and the AC adapter is not connected, the notebook automatically does a suspend-to-disk operation and ignores the When Lid is Closed parameter setting in Setup. The suspend-to-disk file should be present and valid.[...]

3- 14 User’s Manual Suspend-to-Memory Mode Conditions For the notebook to enter suspend-to-memory mode, any of the following conditions should exist: • When Lid is Closed parameter is set to [Suspend To Memory] • The suspend-to-disk file is either absent or invalid Entering Suspend-to-Memory Mode With the suspend-to-memory conditions satisfie[...]

Power 3- 15 Suspend-to-Disk Mode In suspend-to-disk mode, power shuts off. The notebook saves all system status information onto the hard disk (in a file created by Sleep Manager) before entering suspend-to-disk mode. The next time you open the notebook, it restores this information from the hard disk and resumes from where you last left off. Suspe[...]

3- 16 User’s Manual 3.2.3 Advanced Power Management (APM) This notebook supports the APM standard designed to further reduce power consumption. APM is a power-management approach defined jointly by Microsoft ® and Intel ® . The notebook’s heuristic power management scheme works hand-in-hand with APM to take advantage of power saving features [...]

Options 4- 1 Chapter 4 Options This notebook offers excellent connectivity and expansion capabilities with its built-in ports and connectors. This chapter describes how to connect peripherals and hardware options 1 to the notebook. When connecting peripherals, read the manual included with the peripheral for operating instructions. This chapter als[...]

4- 2 User’s Manual 4.1 External Monitor To show graphical effects on a larger display, you can connect an external monitor to the CRT port ( ) on the rear panel. Read the monitor manual for additional instructions. Figure 4-1 Connecting an External Monitor You can press - p to toggle the display output to the external CRT and back to the notebook[...]

Options 4- 3 4.2 External Keyboard This notebook has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible external keyboard. To connect an external keyboard, plug the external keyboard into the PS/2 connector ( ). Figure 4-2 Connecting an External Keyboard I[...]

4- 4 User’s Manual 4.3 External Keypad You can also use a 17-key numeric keypad for number-intensive data entry applications. To connect the keypad, plug in the keypad connector to the PS/2 port ( ) at the rear of the notebook. Figure 4-3 Connecting an External Keypad[...]

Options 4- 5 4.4 External Pointing Device This notebook accepts either a serial mouse or PS/2-compatible mouse or similar pointing device. Connecting an External Pointing Device Plug a serial mouse into the serial port ( ) on the rear panel; plug a PS/2-compatible mouse into the PS/2 port ( ) on the rear panel. To enable a serial mouse, you need to[...]

4- 6 User’s Manual Setting the External Mouse Location Parameter After connecting the external mouse or similar pointing device, press - m to enter Setup and verify the location of the external pointing device. Select Power Saving Options to display the following screen: Power Saving Options Page 1/1 When Lid is Closed ------------------ [ Suspen[...]

Options 4- 7 4.5 Printer This notebook supports both serial and parallel printers. For a serial printer, plug the printer cable into a serial port ( ). For a parallel printer, plug the printer cable into the parallel port ( ). See your printer manual for operating instructions. Figure 4-5 Connecting a Parallel Printer[...]

4- 8 User’s Manual 4.6 Audio Devices You can connect audio devices to the line-in and line-out ports on the notebook. The line-in audio port doubles as a microphone-in port as well. The line-in port accepts an external 3.5mm mini-jack microphone or other line-in devices. The line-out port accommodates external amplified speakers or headphones. Fi[...]

Options 4- 9 4.7 Mini Dock The mini dock serves as a docking base that allows you to connect your notebook to all the peripherals you need, even network connections with its built-in Ethernet support. Consult your dealer for details. A quick guide is included with the mini dock for easy and quick connection instructions. Figure 4-7 Mini Dock 4.8 PC[...]

4- 10 User’s Manual 4.9 Miscellan eous Options 4.9.1 Additional Power Packs Lithium-Ion Battery Pack It is good practice to have a spare battery pack around, especially when you travel. The Li-Ion (lithium-ion) smart battery supplies more power than a conventional NiMH (nickel metal-hydride) battery. With power management, you get even more power[...]

Options 4- 11 Detaching the Battery Compartment Cover Gently pull up the battery compartment cover release latch and slide out the cover. AC Adapter You can purchase an additional AC adapter for your notebook or mini docking station. The compact AC adapter charges your battery pack and supplies power to your notebook.[...]

4- 12 User’s Manual 4.9.2 Cables Floppy Drive Cable The floppy drive cable allows you to use your floppy drive module externally. Open the port cover of the notebook and connect the 25-pin connector end of the floppy drive cable to the parallel port. Then connect the other end to the floppy drive module. PS/2 Y-Bridge Cable The PS/2 Y-bridge cabl[...]

Options 4- 13 File Transfer Cable For non SIR- (serial infrared) capable connections, you can use the file transfer cable to transfer data between the notebook and other computers. Connect the file transfer cable between the two computers and use your file transfer utility to perform the transfer. Figure 4-8 Using the File Transfer Cable[...]

4- 14 User’s Manual 4.10 Key Component Up grades This notebook delivers the power and performance you need. However, some users and the applications they use may demand more. This notebook allows you to upgrade key components when you need increased performance. Contact your authorized dealer if you decide to perform an upgrade. 4.10.1 Additional[...]

Options 4- 15 Installing Memory When installing memory, we recommend you seek the help of a qualified service technician. Improper installation may damage the memory module or the notebook, or cause a malfunction. One of the two memory slots (Slot 2) is accessible via a memory expansion door on the base of the notebook. Follow these steps to instal[...]

4- 16 User’s Manual 6. Replace the memory door and secure it with the screw. 7. Open the display to turn on the notebook. After new memory modules have been installed, the system automatically detects and reconfigures the total memory size. To upgrade memory installed in the other slot (Slot 1), contact your dealer. 4.10.2 Hard Disk You can have [...]

Software 5- 1 Chapter 5 Software This notebook comes pre-loaded with application software and system utilities. This chapter discusses some of these applications and how to make use of them.[...]

5- 2 User’s Manual 5.1 System Software The notebook comes preloaded with the following software 1 : • Windows 95 or other operating systems • System utilities and applications • Suspend-to-disk utility (Sleep Manager) • Touchpad driver • Display driver • Audio driver • Modem driver and application 2 • System core logic driver • [...]

Software 5- 3 5.2 Sleep Manager Notebooks usually feature built-in power-saving functions. In addition to the normal standby mode for power-saving, our notebooks are also capable of a power management feature called 0-volt suspend to hard disk. When a suspend event occurs, this built-in function saves all the system’s current status onto your har[...]

5- 4 User’s Manual The Sleep Manager displays below: Table 5-1 Sleep Manager Window Items Item Description Buttons Click to access the Sleep Manager functions Current Setting Displays the drive and size of the current reserved space created by Sleep Manager. On Board Information Displays the different areas of system memory and their respective v[...]

Software 5- 5 Table 5-1 Sleep Manager Window Items (continued) Item Description Recommended Size Displays the minimum size of the contiguous space you need for the 0-volt suspend-to-disk feature. The actual size may be a little bit more due to file system alignment. Enable Indicator on the Taskbar When this checkbox is checked, the Sleep Manager st[...]

5- 6 User’s Manual Sleep Manager automatically checks the system configuration and displays the recommended size. The drive where the space will be created is defined by the system and will be the first available logical drive which has the requested contiguous free disk space on it. The recommended size is the minimum size needed to save the cur[...]

Software 5- 7 Another possible reason is that the hard disk has enough free space, but this free space exists as small fragments. The free disk space that Sleep Manager requires needs to be contiguous. To solve this problem, the user can use tools such as SpeedDisk (Norton Utilities) or Disk Defragmenter (Windows 95) to compact these free disk spac[...]

5- 8 User’s Manual Exit The user can exit Sleep Manager by selecting the Exit button. Sleep Manager will then quit and disable the capability of auto-adjusting the reserved space size. Disconnecting this feature is NOT recommended. 5.2.3 Running Sleep Manager Once Sleep Manager is installed on the disk, the system automatically loads this utility[...]

Software 5- 9 5.2.4 Sleep Manager Troubleshooting Tips The following table lists the error messages you may receive with their corresponding solutions: Table 5-2 Sleep Manager Error Messages and Solutions Error Message Solution BIOS not compliant with Sleep Manager. Sleep Manager can only run on notebooks with a BIOS compatible with this computer. [...]

5- 10 User’s Manual 5.2.5 Uninstalling Sleep Manager Uninstalling Sleep Manager will delete all files and all system information for Sleep Manager, it loses the capability of auto-adjusting the reserved space size for the system configuration changes or modifications, though the 0-volt suspend feature still functions To uninstall Sleep Manager fr[...]

Software 5- 11 With Sleep Manager installed and the When Lid is Closed parameter in Setup set to [Suspend to Disk] , the notebook enters suspend-to-disk mode when you close the display. The notebook also enters this mode when battery is critically low if the Suspend to Disk on Critical Battery parameter in Setup is set to [Enabled] , regardless of [...]

5- 12 User’s Manual 5.3 Touchpad Driver The touchpad works with most mouse drivers, but the touchpad driver supports special functions that work uniquely with the touchpad. The touchpad driver enhances the Mouse dialog box to include these special features. 5.3.1 Configuring the Touchpad Follow these steps to configure the touchpad: 1. Click on t[...]

Setup 6- 1 Chapter 6 Setup The notebook has a BIOS (Basic Input/Output System) setup utility that allows you to configure the notebook and its hardware settings. This chapter tells how to use the Setup utility and describes each parameter item in the setup screens.[...]

6- 2 User’s Manual 6.1 When to Use Setup The notebook is already correctly configured for you and you do not need to run Setup. If you make any changes to the notebook or you receive an Equipment Configuration Error message after you turn on the notebook, you may need to run Setup. Run Setup also if you want to do any of the following: • Check [...]

Setup 6- 3 6.2 Entering Setup Press - m to enter Setup. The BIOS Utility main screen displays. BIOS Utility About My Computer System Configuration Power Saving Options System Security Reset to Default Settings ↑↓ ←→ = Move Highlight Bar, ↵ = Select, Esc = Exit There are five main menu items: • About My Computer • System Configuration [...]

6- 4 User’s Manual 6.3 About My Computer About My Computer gives you clear-cut information about your notebook PC. The following screen is the first of two pages in this section. About My Computer Page 1/2 System Architecture : MARS 1996-1997 System BIOS : BIOS V2.0 System ID : VGA010602, KBC010607, SMC010023, SMM010210 Processor : Pentium MMX / [...]

Setup 6- 5 About My Computer Page 2/2 Expansion Peripherals PCMCIA Slot 0 : None PCMCIA Slot 1 : None Parallel Port : 378h, IRQ7 Serial Port : 3F8h, IRQ4 IrDA : 2F8h, IRQ3 Modem : 3E8h, IRQ 10, 33.6 kbps, V.34, DSVD AC Adapter : None Main Battery : 60W Li-Ion Onboard Audio Base Address : 240h MPU Base Address : 300h IRQ Setting : IRQ 5 DMA Channel [...]

6- 6 User’s Manual Table 6-1 About My Computer Item Descriptions (continued) Item Description Internal Cache (L1) Internal cache size and whether it is enabled or not External Cache (L2) External cache size and whether it is enabled or not Total Memory Total memory size Bank A Bank A memory module size, type and speed Bank B Bank B memory module [...]

Setup 6- 7 6.4 System Configuration The following screen is the basic system configuration screen. Basic System Configuration Page 1/1 Current Date ---------------- [09/16/96] Current Time ---------------- [16:30:35] Diskette Drive A ------------ [1.44 MB 3.5-inch] Diskette Drive B ------------ [ None ] Cylinder Head Sector Hard Disk 0 (1160 MB) --[...]

6- 8 User’s Manual 6.4.2 Diskette Drives The default setting for Diskette Drive A is [1.44 MB 3.5-inch] and refers to the floppy drive whether it is installed in the module bay or connected externally via the parallel port. Diskette Drive B by default is set to [None] , and is only enabled if two floppy drives are connected to the notebook. 6.4.3[...]

Setup 6- 9 For advanced users, the System Configuration section has two hidden pages called Advanced System Configuration that allow you to view and configure more technical aspects of the notebook. The notebook’s BIOS configuration is already tuned for optimum performance and you do not need to access these screens. If you do not fully understan[...]

6- 10 User’s Manual Press } again to access the next hidden screen. Advanced System Configuration Page 3/3 Onboard Communication Ports Serial Port Base Address --- [3F8h, IRQ4] IrDA Base Address ---------- [2F8h, IRQ3] Modem Base Address --------- [ 3E8h ] IRQ Setting ------------ [10] Parallel Port Base Address - [378h, IRQ7] Operation Mode ----[...]

Setup 6- 11 6.4.7 External Cache External cache greatly increases system performance by lessening the load of main memory. It is also called L2 (level 2) cache. The default setting is [Enabled] . 6.4.8 Enhanced IDE Features The Enhanced IDE Features section includes four parameters for optimizing hard disk performance. These performance features de[...]

6- 12 User’s Manual The highest value, 16 sectors, may not give you the best performance every time, because hard disks behave differently. The default setting, [Auto] , allows the system to adjust itself to the optimum read/write setting. Advanced PIO Mode Advanced PIO (Programmed Input/Output) Mode enhances drive performance by optimizing the h[...]

Setup 6- 13 Serial Port Base Address This parameter accepts the following values: • [3F8h, IRQ 4] • [2F8h, IRQ 3] • [3E8h, IRQ 4] • [2E8h, IRQ 3] • [Disabled] The default setting is [3F8h, IRQ 4] . IrDA Base Address This parameter accepts the following values: • [2F8h, IRQ 3] • [Disabled] The default setting is [2F8h, IRQ 3] . Modem B[...]

6- 14 User’s Manual Parallel Port Base Address, Operation Mode and ECP DMA Channel The Parallel Port Base Address parameter accepts the following values: • [378h, IRQ 7] • [3BCh, IRQ 7] • [278h, IRQ 5] • [Disabled] The default setting is [378h, IRQ 7] . The Operation Mode parameter for the parallel port accepts the following: • [Standar[...]

Setup 6- 15 6.4.10 Onboard Audio This parameter lets you enable or disable the onboard audio functionality of the notebook. This section also includes settings for onboard audio. The default setting is [Enabled] . Base Address This parameter accepts the following values: • [220h] • [230h] • [240h] • [250h] The default setting is [240h] . MP[...]

6- 16 User’s Manual 6.4.11 Reset PnP Resources The system resources are already properly configured. If resource conflicts should arise, set this parameter to [ Yes] to reset the PnP resources and re-do allocation. The BIOS automatically sets this to [No ] afterwards. The default setting is [No ] .[...]

Setup 6- 17 6.5 Power Saving Options The following screen is the power saving options screen. Power Saving Options Page 1/1 When Lid is Closed ------------------ [ Suspend to Disk ] Suspend to Disk on Critical Battery - [Enabled ] Display Always On ------------------- [Disabled] Internal Speaker -------------------- [Enabled ] External Mouse Locati[...]

6- 18 User’s Manual 6.5.1 When Lid is Closed The notebook’s lid switch acts as its power switch. Simply put, opening the display wakes up the notebook; closing the display puts it to sleep. The When Lid is Closed parameter determines which suspend mode the notebook enters when the display is closed. There are three settings for this parameter: [...]

Setup 6- 19 6.5.2 Suspend to Disk on Critical Battery With this parameter set to [Enabled] , the notebook enters suspend-to- disk mode when the battery becomes critically-low. The default setting is [Enabled] . 6.5.3 Display Always On This parameter lets you specify whether the display is always on or not. When enabled, the screen will not blank. T[...]

6- 20 User’s Manual 6.5.6 Internal Modem For models with an internal modem, set this parameter to [Power-On] when you are using the internal modem. If you are not actively using the internal modem, you can set this parameter to [Power-Off] to conserve power. The default setting is [Power-On] . 6.5.7 Resume On Modem Ring You can set the notebook t[...]

Setup 6- 21 6.6 System Security The following screen is the system security screen. If a password is currently present, the system prompts you to input the password before entering the System Security screen. System Security Page 1/1 Supervisor Password ------------ [ None ] User Password ------------------ [ None ] Disk Drive Control Diskette Driv[...]

6- 22 User’s Manual 6.6.1 Supervisor and User Passwords The supervisor and user passwords both prevent unauthorized access to the notebook. When these passwords are present, the notebook prompts for the user or supervisor password during system boot-up and resume from suspend. The supervisor password also gives full access to Setup. The user pass[...]

Setup 6- 23 After setting a password, the notebook sets this parameter to [Present] . The next time you boot the notebook, resume from suspend mode, run the Setup utility or unlock system resources, the password prompt appears. Key in the appropriate password (Supervisor or User). The system asks for your password input until you enter the correct [...]

6- 24 User’s Manual 6.6.3 Hard Disk Drive Control This parameter allows you to enable or disable the read/write functions of the hard disk. The following table summarizes the available options. Table 6-3 Hard Disk Drive Control Settings Setting Description Normal (default) Hard disk functions normally Write-Protect Disables any hard disk write fu[...]

Setup 6- 25 6.6.5 Flash New BIOS Contact your authorized dealer if you need to upgrade your BIOS.[...]

6- 26 User’s Manual 6.7 Reset to Default Settings Selecting this option allows you to load all the default settings. These settings are the values initially stored in CMOS RAM intended to provide high performance. If in the future you change these settings, you can load the default settings again by selecting this option. When you select this opt[...]

Traveling with the Notebook 7- 1 Chapter 7 Traveling with the Notebook This chapter tells you what to do when traveling with the notebook. This chapter also includes a list of our worldwide offices and contact information.[...]

7- 2 User’s Manual 7.1 Travel Preparations Follow these steps to prepare the notebook for travel: 1. Make diskette or tape backup copies of important files on the hard disk. 2. Close the display to turn off the notebook and all peripherals. 3. Make sure the display is properly closed. The display cover latch must be secure. 4. Disconnect the AC a[...]

Traveling with the Notebook 7- 3 7.2 International Traveler’s Warranty Your notebook is backed by an international traveler’s warranty (ITW) that gives you security and peace of mind when traveling. Our worldwide network of service centers are there to give you a helping hand. Simply fill up and return the ITW application form to avail of this [...]

7- 4 User’s Manual Computec Servicio, S.A. de C.V. Poniente 140 no. 717 Col. Industrial Vallejo Mexico, D.F. C.P. 02300 Tel.: 52-5-729-5570 / 729-5590 Fax: 52-5-729-5596 Attn: Mr. Alicia Camacho Acer Computer B.V. (ACH) Europalaan 89 5232 BC's-Hertogenbosch, The Netherlands Tel: 31-73-645-9595 Fax: 31-73-645-9599 Attn: Mr. Martien Strauven A[...]

Traveling with the Notebook 7- 5 Acer Computer(South Asia) Pty Ltd. (ASA) Block 4, Pasir Panjang Rd., #10-29 Alexandra Distripark, Singapore 0511 Tel: 65-276-4878 Fax: 65-274-9925 Attn: Mr. Vincent Ng Acer Sales & Service Sdn Bhd (AMA) Tech. Supp. . No. 25, Jalan 8/91, Taman Shamelin Perkasa, Off Jalan Cheras, 56100 Kuala Lumpur, Malaysia Tel: [...]

7- 6 User’s Manual 7.3 Worldwide Support If the country you are traveling in does not have an Acer-authorized ITW service site, you can still get in contact with our offices worldwide. World Headquarters Acer Incorporated 156 Min Sheng E. Road Sec. 3, 6F Taipei, Taiwan 105, R.O.C. Telephone: 886-2-545-5288 Facsimile: 886-2-545-5308 Homepage: http[...]

Traveling with the Notebook 7- 7 Acer Korea Co. Ltd. DaeYoung Building, #831 44-1 Yoido-Dong, YoungDeungPo-Ku Seoul, South Korea Telephone: 82-2-784-6898/9 Facsimile: 82-2-784-6897 Acer Market Services, Ltd. Science & Technology Trade Center 4th Area, 3F Rm.329 37 Bai Shi Qiao Rd., Haidian District, Beijing, People’s Republic of China Telepho[...]

7- 8 User’s Manual Europe Acer Belgium N.V. Coremansstraat 34, 2600 Antwerpen (Berchem) Belgium Telephone: 32-3-2305032 Facsimile: 32-3-2813325 Acer Computer B. V. Europalaan 89 5232 BC’s-Hertogenbosch The Netherlands Telephone: 31-73-6459645 Facsimile: 31-73-6459699 Acer Computer France S.A.R.L. Paris Nord II 165 avenue du Bois de la Pie B.P. [...]

Traveling with the Notebook 7- 9 Acer America/North Central West Two Continental Towers 1701 Golf Rd., Suite 601 Rolling Meadows, IL 60008, USA Telephone: 1 (708) 640-7112 Facsimile: 1 (708) 640-6865 Acer America/Midwest Farmington Hills, MI Telephone: 1 (810) 471-2451 Facsimile: 1 (810) 471-2451 Acer America/South Central 5025 Arapaho Rd., #250 Da[...]

7- 10 User’s Manual Africa Acer Africa (Pty) Ltd Fedlife Park, Unit 12A Cnr. Pretoria Main Rd. and Tonnetti St., Halfway House South Africa Telephone: 27-11-315-3335 Facsimile: 27-11-315-1032[...]

Traveling with the Notebook 7- 11 You can also contact the local dealer or distributor in the country you are traveling for assistance. If you are connected to the Internet and have World Wide Web access, visit our home page (http://www.acer.com/) and get an updated list of our worldwide offices, as well as information about our products.[...]

Troubleshooting 8- 1 Chapter 8 Troubleshooting This chapter tells how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the system. Do not attempt to open the system by yourself. Contact your dealer or an authorized service center for assistance.[...]

8- 2 User’s Manual 8.1 Q & A Q & A lists possible situations that may arise during the use of your notebook, and gives easy answers and solutions to these questions. Q: I travel a lot and occasionally use my notebook in extreme temperature conditions. Will my notebook bend to the weather? A: The notebook’s core design makes use of mater[...]

Troubleshooting 8- 3 Q: I prefer using an external keyboard and mouse, but both have PS/2 connectors and there is only one PS/2 port on the notebook. How do I connect them to the notebook at the same time? A: To connect two PS/2-type devices to the notebook, you need to use a PS/2 Y-bridge cable. See PS/2 Y-Bridge Cable in section 4.8.2 for details[...]

8- 4 User’s Manual Q: I made some changes in Setup but they don’t seem to take effect. A: If you made any changes in Setup, these will only take effect the next time the system restarts. Here a few ways to restart your notebook: • In Windows 95, click on the Start button and select Shutdown…. Then select the Restart option. • In POST, exe[...]

Troubleshooting 8- 5 Q: The serial mouse does not work. A: Do the following: • Make sure that the serial cable is plugged securely into the serial port. • Try pressing - n ( PnP ) to reconfigure Plug-and-Play devices. Remember to set the External Mouse Location parameter in the Power Saving Options screen in Setup and select COM1 if you connect[...]

8- 6 User’s Manual Q: No audio comes out from the notebook. A: Check the following: • The volume may be muted. Press - q ( ). If the pop-up does not contain a speaker icon, press - r ( ) to turn the speaker back on. • The volume level may be too low. Press - b - w ( ) to increase the volume. • If headphones, earphones or external speakers a[...]

Troubleshooting 8- 7 8.2 POST Error Messages If you receive an error message during POST, note the message and take corrective action. Table 8-1 lists the error messages in alphabetical order together with the recommended course of action. Table 8-1 POST Error Messages Error Message Corrective Action CMOS Battery Bad Contact your dealer or an autho[...]

8- 8 User’s Manual Table 8-1 POST Error Messages (continued) Error Message Corrective Action Missing operating system Correct the HDD type and reboot. See the specification label pasted on the back side of the notebook or attached to hard disk drive. We suggest you set the HDD type to [Auto] for hard disk drive auto-detection. Non-system disk or [...]

Troubleshooting 8- 9[...]

Specifications A- 1 Appendix A Specifications Item Standard Optional Microprocessor Mobile Intel Pentium™ processor with MMX Memory System / Main External cache 16MB Dual 64-bit memory banks 256KB L2 cache (synchronous SRAM) Expandable to 64MB using 8/16/32MB soDIMMs FLASH BIOS 256KB Storage system One 2.5-inch, high-capacity Enhanced-IDE hard di[...]

A- 2 User’s Manual Item Standard Optional Audio system 16-bit stereo audio with built-in FM synthesizer Built-in microphone and dual angled speakers Communications system 1 Built-in V.34 fax/data modem (28.8Kbps) with digital simultaneous voice over data (DSVD) support PC card modem Operating system Windows 95 DOS and Windows 3.x, OS/2 Warp Keybo[...]

Specifications A- 3 Item Standard Optional I/O ports (continued) One type III or two type II PC Card slot(s) One serial infrared port ( IrDA-compliant) One 3.5mm minijack microphone-in/line-in port One 3.5mm minijack speaker-out/line-out port RJ11 phone jack 1 LAN card or other PC cards External IR adapter Microphone or line-in device Speakers or h[...]

A- 4 User’s Manual Item Standard Optional AC adapter 100~240Vac, 50~60Hz autosensing AC adapter Extra AC adapter Battery pack Type Charge time 57WH Lithium-Ion battery with intelligent charging and built-in battery gauge 2.0-hour rapid-charge 4.0-hour charge-in-use Extra battery pack[...]

Address and Interrupt Tables B- 1 Appendix B Address and Interrupt Tables B.1 System Memory Map Address Range Definition Function 000000 - 09FFFF 640 KB memory Base memory 0A0000 - 0BFFFF 128 KB video RAM Reserved for graphics display buffer 0C0000 - 0CBFFF Video BIOS Video BIOS 0F0000 - 0FFFFF 64 KB system BIOS System BIOS 10000 - 7FFFF 80000 - 27[...]

B- 2 User’s Manual B.2 I/O Address Map Address Range Device 000 - 00F 020 - 021 024, 026, B0h 02E - 02F 040 - 043 048 - 04B 060 - 06E 070 - 071 080 - 08F 0A0 - 0A1 0C0 - 0DF 1F0 - 1F7 3F6 - 3F7 170 - 177 376 - 377 220 - 22F 240 - 24F 260 - 26F 280 - 28F 278 - 27F 2E8 - 2EF 2F8 - 2FF 300 - 301 310 - 311 320 - 321 330 - 321 34C - 34F 378 - 37F 388 [...]

Address and Interrupt Tables B- 3 B.3 Interrupt Levels Interrupt Number Interrupt Source (Device Name) IRQ 0 IRQ 1 IRQ 2 IRQ 3 IRQ 4 IRQ 5 IRQ 6 IRQ 7 IRQ 8 IRQ 9 IRQ 10 IRQ 11 IRQ 12 IRQ 13 IRQ 14 IRQ 15 System Timer Keyboard Cascade IrDA / 2F8h Serial Port 1 / 3F8h Audio ESS1688 Floppy Disk Controller (FDC) Parallel Port Real Time Clock (RTC) Eth[...]