Acnodes PC 5170 manuel d'utilisation

PC 5170 17-inch touch PANEL PC USER MANUAL[...]

Page 1[...]

PC 5170 Flat Panel PC REVISION HIST OR Y Ti tl e PC 5170 Flat Panel PC User M anual Rev i sion Num b er Descri ption Dat e o f I s su e 1.0 Initial release September 2 006 1.1 Appendix A – ACNODES Panel PC product line added W all mounting pro cedure update d LCD dimensi ons corrected Dece mber 2 0 06 ABOUT THIS MANUAL This docu ment covers the d[...]

PC 5170 Flat Panel PC SAFETY PRECAUTIO NS 1 Prior to installing, moving, and modifying the pane l PC, make sure the power is turned of f and the power cord is di sconnecte d. 2 Do no t a pp ly v ol ta ge lev el s that e xceed the sp ecified voltage rang e. Doing so will cause fire or an el ectrical shock. 3 Electri c sho cks can oc cur i f the p an[...]

PC 5170 Flat Panel PC 5 The p anel PC is actively co oled. In no circum sta nces should the p an el PC operate with the opening s obstructe d by fo rei gn o bj ec ts. Howe ve r , t he ambient temperature of the installatio n sit e sh ould be ob serv ed a nd co ntro lled to avoid overheating the panel PC. 6 Condens ation migh t form in side the pane[...]

PC 5170 Flat Panel PC 1 Except for the properly inst alled front LC D panel, neve r spr ay or squir t liq uids di re ct ly o nt o an y c omp uter c omp o ne nt. If the device need s to be cleane d, please rub it with a piece o f dry and soft cl ot h or a sl ightl y m ois te ned c lot h wi th the exterior c asing. 2 The interi or of the p anel PC do[...]

PC 5170 Flat Panel PC 5 Cotton swab s - Cotton swaps m oistene d with rubbin g alcohol or water a re exc ell ent too ls fo r wipi ng har d to r each areas in the keyboard, mouse, and other location s. 6 Foam swabs - Whenever possibl e it is better to use lint free swabs su ch a s foam swabs. ESD PRECAUTIONS Observe all convention al anti-ESD method[...]

PC 5170 Flat Panel PC CONVENTI ONS USE D IN THIS MANUAL WA R N I N G ! W arnings ap pear where ov erloo ked det ails m ay cau se damage to the equi pment or result in personal i njury . W arnings sho uld be take n seri ously . W arnings are easy to recogni ze. The word “wa rning” is writt en as “ WAR N I N G ,” both capitalized an d bold an[...]

PC 5170 Flat Panel PC T able of Content s 1 INTRODUCTION................................................................................................... 19 1.1 PC 5170 F LA T P ANEL PC O VER VIEW .................................................................... 20 1.1.1 PC 5170 Model V ariation.................................................[...]

PC 5170 Flat Panel PC 2.5 P ERIPHERAL D EVICE I NTERF ACES , C ONNECTORS , AND S LOTS ................................. 38 2.5.1 OEM Options ................................................................................................... 38 2.5.2 Internal Slots .....................................................................................[...]

PC 5170 Flat Panel PC 3.8.6 Serial Port Connection .................................................................................... 67 3.8.7 Audio Port Connection..................................................................................... 67 4 SYSTEM MAINTENANCE ..........................................................................[...]

PC 5170 Flat Panel PC 5.3.8 Remote Access Configuration .........................................................................1 10 5.3.9 USB Con figura tion..........................................................................................1 12 5.4 PCI/P N P ..................................................................................[...]

Page 1 1[...]

PC 5170 Flat Panel PC B.1 1 F AN C ONNECTOR ................................................................................................. 162 B.12 I NVER TER (LCD B ACKLIGHT ) C ONNECTOR ........................................................ 163 B.13 LCD P ANEL LV D S I NTERF ACE C ONNECTOR ....................................................[...]

PC 5170 Flat Panel PC List of Figures Figure 1-1: PC 5170 Fr ont View ................. ............. .............. ............................ .......21 Figure 1-2: PC 5170 Rear View ...... ................ .............. .............. ............... .............. .22 Fi gur e 1- 3: PC 5170 Top View .... ............. .............. .........[...]

PC 5170 Flat Panel PC Figure 4-2: CD Driv e Re tenti on Screws .................. ...... ..... ........ ...... ........ ...... ..... ......73 Figure 4-3: Internal Elevated Platform Rete ntion Screws ........... ....................... .....73 Figure 4-4: Elevated Platform Ret ention S cre ws (Top Panel) ........................ ........ 73 Figure 4[...]

PC 5170 Flat Panel PC List of T a bles Ta ble 1 -1: PC 5170 Model Variation ............. ............................ ............. ..................20 Ta ble 1- 2: PC 5170 Specifica tions .... ........ ......... ........ ......... ......... ....... .......... ........ ..28 Table 1-3: Motherboard Specificati ons ............... ........ ........ [...]

PC 5170 Flat Panel PC List of BIOS Menus BIOS Menu 1: Main ............. ..... ... ..... ... ... ..... ... ...... .. ... ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..84 BIOS Menu 2: Advanced............ ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..... ... ... ..... ... ...... .. ... .... 86 BIO S Menu 3 : CPU C onfig[...]

PC 5170 Flat Panel PC Glossary AC ’97 Audio Codec 97 ACPI Advanced Co nfiguration and Power Interfac e APM Advanced Power Management ARMD ATAPI Removable Media Device ASKIR Shift Keyed I nfrared ATA Advanc ed Tech nology At tachment s BIOS B asic Input/Output System CFII Compact Flash Type 2 CM OS Complementar y Metal Oxide Semicondu ctor CPU Cen[...]

PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 18 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Chapter 1 1 Introduction Page 19[...]

PC 5170 Flat Panel PC 1.1 PC 5170 Flat Panel PC Overview The PC 5170 flat panel PC is a flexible, multi- func tiona l fla t p anel PC that can be applied in diverse operation al envi ronment s and implemen ted in multi-faceted a pplicati ons. The PC 5170 comes fully kitt ed with a hi gh-pe rfo rm an ce mo th er boa rd , C PU , po we r s upply unit [...]

PC 5170 Flat Panel PC 15 Hi gh br ig htnes s 17 ” i ndus tri al g ra de panel 16 Fully I/O function support: o 6 x COM (1 for Touch S creen) o 6 x USB 2.0 ports o 1 x PCI slot o 1 x CF so cket 17 Dual 10 /100/Gigabit Ethernet supported 18 RoHS co mpli ant 1.2 PC 5170 External Overview 1.2.1 General Description The PC 5170 flat p anel P C is compr[...]

PC 5170 Flat Panel PC 1.2.3 Rear Panel The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-2 . Fi gu re 1 -2 : PC 5170 Re ar V iew Page 22 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC 1.2.4 Top Panel The top pane l has two fan vents and three re tention screws for secu ring the d rive bay bracket. The retention scre ws a re circled in Figure 1-3 below . Fi gur e 1 -3: PC 5170 Top V iew 1.2.5 PC 5170 Bottom Panel The bottom panel shown in Figure 1-4 has the following interfaces : 19 1 x Power input conn ecto[...]

PC 5170 Flat Panel PC Figure 1-4: Bottom View 1.2.6 Left Panel The left side panel ha s two fan vent s and four retention screws for se curing the two internal fans. The retention screws are circle d in Figure 1-5 . Figure 1-5: Left View 1.2.7 Right Panel The right sid e panel provi des ac cess to a slim type CD drive ba y and a FDD drive bay shown[...]

PC 5170 Flat Panel PC Figure 1-6: Left View 1.2.8 Frame An aluminum frame su rrou nds th e 17” T FT LC D screen. The b ack of the aluminum frame has sixteen mounting screw holes. Th ese scre ws are ci rcled in Figure 1-7 . Figure 1-7: Frame Rear View Page 25[...]

PC 5170 Flat Panel PC 1.3 PC 5170 Inte rnal Overview The PC 5170 internal components are configured in a three level format. An elevated platform on t he ri ght si de of t he chassi s supp ort s a HDD, a CD d rive and a F DD. On the secon d level, below the elevated platfo rm, are a mo therbo ard an d a PSU module. The motherboard and the PSU modul[...]

PC 5170 Flat Panel PC SPECIFICA TION DET A IL Front Panel Aluminum Front Panel meet s IP65 standard Chassis Heavy-duty Steel LCD Panel 17” High lumi nance TFT LCD Resolution 1280 x 1024 (SXGA) Brightness 300 cd/m2 Contras t Rati o 500:1 LCD MT BF 50,000 hrs Backlight M TBF 50,000 hrs V ie w i ng Angle (H-V ) 140/130 T ouch Scre en Optional 5-wi r[...]

PC 5170 Flat Panel PC SPECIFICA TION DET A IL Vib r a t io n 5 - 17Hz, 0.1” double ampli t ude displace ment. 17 - 640Hz, 1.5G accelerat ion, peak to peak. Shock 10G Accelera tion, peak to peak (11m s) Dimensions 452(W) x 356(H) x 110(D) mm Net/Gro ss W eight 8/12 Kg Environment RoHS Com pli ant Ta ble 1- 2: PC 5170 Spec if ica ti ons 1.4.3 PC 51[...]

PC 5170 Flat Panel PC SPECIFICA TION DET A IL COM 1 x RS-232/422/485 p ort 5 x RS-232 port s (1 for optional touch screen ) USB 2.0 6 x USB 2.0 ports Driv e Interfaces 2 x SA T A drive connectors LPT 2 x A T A 100 channels KB/ MS 2 x PS/2 connector IrDA 1 x IrDA interface Table 1-3: Mother board Specificatio ns 1.4.4 Flat Panel Screen The PC 517 0 [...]

PC 5170 Flat Panel PC SPECIFICA TION DET A ILS Respon se T i me (ms) (at 25°C) 8 Power Consumption (W) 25.8 Interface 2ch L VDS Supply V oltage (V) 5 Backlight 4 CCFL Outline Dimensions (m m) 358.5 x 296.5 x 17.0 Wei ght (g) 1900 Table 1-4: 17” TFT LCD Monitor Spec ifications 1.4.5 Pow er Supply The PC 5170 flat panel PC comes with a n 1 80W AC-[...]

PC 5170 Flat Panel PC The specifi c a tions for the PSU module are shown in ( T able 1-5 ). V oltage AC90V ~ 264V AC Full Range Frequency 47 ~ 63 Hz INPUT Input Curren t 4A(RMS)@1 15V AC 2A(RMS)@ 2 30V AC Inrush Curre nt 50A Max for 1 15V AC 80A Max for 230V AC V olt age (V ) +3.3V +5V +12V -12V 5VSB Min. Load (A) 0.3A 0.3A 1.5A 0A 0A OUTPUT Max. L[...]

PC 5170 Flat Panel PC 1.5 Dimensions The dimensions of the PC 5170 flat panel PC are shown in Fig ure 1-9 below . Figure 1-9: Dimensions (units in mm) Page 32 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Chapter 2 2 EMBEDD ED Motherboard[...]

Page 33[...]

PC 5170 Flat Panel PC 2.1 Introducti on The PC 5170 flat screen PC con tain s a EMBEDDED motherboa rd. The mothe r b oard i s the heart of any comp uter a nd is re sponsi ble for transmitting, recei ving and p rocessi ng dat a as well as d riv ing the dif ferent on-boa rd device s. Thi s chapte r gives a b rief intro duction to the EMBEDDED motherb[...]

PC 5170 Flat Panel PC quality and full surround sound capability . 42 LAN Conne ct Interface (LCI) provid e s network solution s for 10/100 Mbp s Ethernet and 10/100 Mbps Etherne t with LAN manageability 43 Dual Ultra A T A/100 controll ers 44 Error Co rrecti ng Cod e (ECC) suppor t in integrated graphi cs mode only 45 The Intel Application Ac cele[...]

PC 5170 Flat Panel PC o RAID Level 0 Support (ICH5R Only) 51 Integra ted IDE Controller o Supports “Na tive Mode ” Registe r and In terrupts o Independent timing of up to 4 drives o Ultra ATA/100/66/33, BMIDE and PIO modes o Tri-state modes to ena ble swap bay 52 Interrupt Cont roller o Supports up t o 8 PCI interrupt pins o Supports PCI 2.3 Me[...]

PC 5170 Flat Panel PC 59 Zone Rendering 2 T echnolog y : Enhances the performance of zone renderi ng by using larger zone s and new co m ma nd s th at im pro ve g ra ph ic s pipeline ef fi ciency . 60 D y namic V ideo Memor y T echnology v2.0 : I ncre ase s tot al syste m performan ce by optimizing the efficienc y o f AGP dynam ic vi deo me mor y b[...]

PC 5170 Flat Panel PC o Hardware mo tion compen sation sup port for DVD pl ayback o 4x2 overlay filter o 350 MHz DA C frequen cy o Maximum DVO pixel rat e of up to 330MP/s o Flat panel monitors and TV-out support via AGP Digital Displa y (ADD) cards o 350 MHz DA C for 1800x 1440 @ 8 5Hz max CRT re solution or 2048x1536 @60Hz max FP resolution o Syn[...]

PC 5170 Flat Panel PC 69 1 x A TX power conne ctor 70 2 x Audio connectors 71 1 x DIO connector 72 3 x Fan connectors 73 1 x FDD connector 74 2 x IDE device connectors 75 1 x IrDA conn ector 76 1 x Keyboard conn ecto r 77 1 x PS/2 mouse connecto r 78 1 x LCD backlight conne ctor 79 1 x L VDS interface con nector 80 1 x Multi panel connec tor 81 1 x[...]

PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 40 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Chapter 3 3 Installation and Configuration Page 41[...]

PC 5170 Flat Panel PC 3.1 Installation Precautions When inst alling the PC 5170, please follow the p recautio ns liste d below: 1 Power turned off : Wh en inst alli ng the PC 5170 make sure the po wer is of f. Failing to turn off the power may caus e severe injury to the body and/or damage to the system. 2 Certified Engineers : Only certified engin[...]

PC 5170 Flat Panel PC 3.3 Installation and Configuration Steps The following inst allatio n st eps mu st be followed. Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Unpac k t he PC 5170. Set the jumpe r settings. Install HDD, FDD a nd CD drive. Mount the PC 5170 flat panel PC. Connect peripheral devices to the bottom panel of the PC 5170. Configur[...]

PC 5170 Flat Panel PC 3.4.1 Packing List The PC 5170 flat panel PC is shipped with the following components: 107 1 x Carton 108 1 x Power cord 109 1 x Screw kit 110 1 x HDD IDE cabl e (44 pi n + 2 x 40 pin) 111 1 x HDD IDE cabl e (44 pi n + 40 pin ) 112 1 x HDD SA T A cable 113 1 x Driver CD (including u ser manual) 114 1 x CPU cooler 115 1 x CD-RO[...]

PC 5170 Flat Panel PC NOTE: A jumper is a m et al bridge t hat is used to close an ele c trical ci rcuit. It consist s of two metal pins and a s m all m etal clip (often protected by a plastic cover) that slides over the pins to connect them. T o CLOSE/SHORT a jum per means connecting the pins o f the jumper with the plastic clip and to OPEN a jump[...]

PC 5170 Flat Panel PC Figure 3-1: Back Cover Retent ion Scre ws 3.5.2 CF Card Setup (JP12) The CF Card Setup jumpe r configu re s a CF card as ei ther the slave or the master . JP12 DESCRIPTIO N Open Slave (D efault ) Close Master Table 3-2: CF Card Setup Jumper Settings Page 46 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC 3.5.3 Clear CMOS Setup (JP1) If the motherb oard fails to boot due to improper B IOS sett ings , use this jump er to c lear the CMOS data and re set the system BIOS information . To do this, use the jum per cap to close pin s 2 and 3 for a few second s then rein stall the jumper clip back to pins 1 and 2. If the “CMOS Settin[...]

PC 5170 Flat Panel PC 3.5.5 COM port RI and Voltage Sel ection Use JP7 and JP9 to set pin 9 of COM1 as signal RI or voltage source. JP9 DESCRIPTION 2-3 clos ed COM1 RI PIN Use RI 1-2 clos ed COM1 RI PIN U se Vo ltag e Table 3-5: COM1 RI and Voltage Selection Jumper JP7 DESCRIPTION 2-3 clos ed COM1 R I PIN U se Vo ltag e +12V 1-2 clos ed COM1 R I PI[...]

PC 5170 Flat Panel PC JP6 DESCRIPTION 2-3 clos ed COM2 RI PIN Use Voltag e +12V 1-2 clos ed COM2 R I PIN U se Vo ltag e +5V Table 3-8: COM2 RI Volta ge Selection Jumper Use JP13 an d JP15 to set pin 9 of COM 3 as signal RI or volt age so urce. JP15 DESCRIPTIO N 2-3 clos ed COM3 RI PIN Use RI 1-2 clos ed COM3 RI PIN U se Vo ltag e Table 3-9: COM3 RI[...]

PC 5170 Flat Panel PC 3.5.6 CPU Voltage Setting (S3) T wo dif fere nt types of CPU can be used on the EMBE DDED mothe rboard. One i s Pentium 4 CPU and the other is Pentium4-M CP U. Use the CPU volta ge setting jump er (S3) to configure th e power of CP U. When u sin g P entium 4 CPU, ple ase open S3 jum per . CPU VI D a ut oma ti call y co nfi gu [...]

PC 5170 Flat Panel PC JP2 DESCRIPTION 1-2 clos ed +3.3V (default) 3-4 clos ed +5V 5-6 clos ed +12V Table 3-15: LCD Voltage Setup Ju mper Settings 3.6 HDD, FDD and CD Drive Installation 3.6.1 HDD Installation T o install a HDD, plea se follow the steps below: Step 1: Step 2: Remove the back cover ( Se ct io n 3. 5.1 ). The HDD bracket is attached to[...]

PC 5170 Flat Panel PC Insert the four retention screws into the base of the HDD bracket. Step 5: Connect the IDE/SA T A cable from the IDE/SA T A connector on the motherboard to the rear of HDD. Step 0: 3.6.2 FDD Installatio n T o install the FDD, plea se follow the step s belo w: Step 1: Step 2: Step 3: Remove the back cover ( Se ct io n 3. 5.1 ).[...]

PC 5170 Flat Panel PC Figure 3-4: FDD Adap ter and FDD Br a cket Ins t allation Step 5: Step 6: Step 7: At tach t he FDD b ra cket to the FDD . T o do this, align the four retent ion scre w holes in the F DD b rac ket with the retenti on screw hol es on th e si des of the F DD. Insert four retention screws into the bracket of the FDD. Reinst all th[...]

PC 5170 Flat Panel PC Figure 3-5: CD Drive Adapter Installation Step 4: Step 5: Remove the back cover of the PC 5170 (see Section 3.5.1 ). The CD drive blan k plate a ssembly is att a ched to the re ar p anel by t wo retention scre ws ( Figure 3-6 ). Figure 3-6: CD Drive Retention Screws Remove the two rete ntion scre ws from the bottom p anel and [...]

PC 5170 Flat Panel PC Figure 3-7: Remov e CD Driv e Step 6: The CD drive blank plate assembly consists of a blan k plate and two brackets that attach th e assembly to the cha ssis. The two b ra cket s each h ave two screws that attach them to the bla nk plate. Remove the four screws that attach the bracket s to the blank plate. Figure 3-8 shows the[...]

PC 5170 Flat Panel PC Figure 3-9: CD Driv e Blank Plate As se mbly WA R N I N G ! The two scre ws (bl ack M2 *3) sho wn in the lef t image of Figure 3-9 are dif ferent from the two screws (silve r M2*2) sho wn in the right. Please secure th e co rrect screws i nto the CD drive a ccordi ng to the im ages sh own in the Figure 3-9 . Step 8: Step 9: Sl[...]

PC 5170 Flat Panel PC Figure 3-10: CD Drive Installed Page 57[...]

PC 5170 Flat Panel PC 3.7 Mounting the System WA R N I N G ! When m ounting the PC 5170 flat pan el PC onto an arm, wall or into a pan el, it is advisa ble to have m ore than one person h elp with th e install ation to prevent acci dental dam ag e to the p ane l and avoid p ersonal injury . The four method s of moun ting the PC 5170 are: 125 W all [...]

PC 5170 Flat Panel PC Figure 3-11: Wall-moun ti ng Bracket Step 6: Step 7: Step 8: Insert the four monitor mou nting screws provided in the wall mou nting kit into the four screw ho les on the real p anel of the monitor and tighten until the scre w shank i s secured ag ain st the rear p a nel (see Figure 3-12 ). Align the mounting screws on the mon[...]

PC 5170 Flat Panel PC Figure 3-12: Mount the Chassis Step 9: Secure the panel PC with the wall-mounting kit. T o do this, stick the protective cush ion to the wall-mounting k it first. Then, put the wall-mounting kit on the top panel of the panel PC. Carefully mark t he location of the wall-mounting kit screw holes on the wall. Drill a pilo t hole [...]

PC 5170 Flat Panel PC Figure 3-13: Secure the Chassis 3.7.2 Panel Mounting T o mount the PC 5170 flat panel PC into a pa nel, please follow the steps below . NOTE: The m axim um panel thickness should be no m ore than 6m m. Step 1: Step 2: Select the position on the panel to moun t the PC 5170. Cut ou t a s e cti on of t he p anel th at c or re spo[...]

PC 5170 Flat Panel PC Figure 3-14: Cut the Panel Step 3: Step 4: Slide the PC 5170 through the hole unti l the metal frame is flush agains t the pane l. Insert the pan el mounting clamps into the pre -forme d holes alon g the edg es of the PC 5170, behind the metal fram e. Refer to the mounting kit p a cki ng list for the require d numbe r of mount[...]

PC 5170 Flat Panel PC Figure 3-16: Tighten the Panel Mounting Clamp Screw s 3.7.3 Arm Mounting The PC 5170 is VESA (V ideo Elect ronics S tandar ds Ass oci at io n) c ompl i ant and can be mounted on an a rm with a 100m m interface p ad. T o mount the PC 5170 on an a rm, please follow the step s bel ow . Step 1: The arm is a separately purcha sed i[...]

PC 5170 Flat Panel PC PC 5170 flat panel PC. The PC 5170 flat panel PC arm moun t retention screw hole s are shown in F i gure 3-1 7 . Figure 3-17: Arm Mou nt Retention Scre w Holes Step 4: Secure the PC 5170 to the interfa ce pa d by insertin g four retention screws through the mounting a rm interface pad and into the PC 5170 flat panel PC. Step 0[...]

PC 5170 Flat Panel PC Step 3: Step 4: Mak e sure the re ten tion scre w holes at the rear of the PC 5170 frame are aligned with the retentio n scre w hol es in the cabi net/rack b r a cket. Secure the cabinet/rack bracket to the monitor by inserting and tightening the retention screws ( Figur e 3 - 18 ). Figure 3-18: Secure the Rack/Cabinet Brac ke[...]

PC 5170 Flat Panel PC Figure 3-19: Install into a Rack/Cabinet Step 6: Once the PC 5170 flat panel PC with the attached rack/cabinet br acket has been properly inserted into the rack/cabinet, secure the front of the rack/cabine t bracket to the front of the rack/cabinet ( Figure 3-19 ). Step 0: 3.8 External Peripheral Interface Connectors 3.8.1 LCD[...]

PC 5170 Flat Panel PC 3.8.2 Ethernet Connection The two external p eripher al interface RJ-4 5 conn ect ors ca n be connecte d to an extern al LAN to provide Internet connec tivity to the flat panel PC. 3.8.3 USB Conn ection The external periphe ral interface USB c onnectors provide easy and quick acce ss to external USB devices. The external perip[...]

PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 68 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Chapter 4 4 System Maintenance Page 69[...]

PC 5170 Flat Panel PC 4.1 System Maintenance Introduction The following system com ponent s may require mainte nance. 129 Motherboa r d 130 DIMM module 131 PSU mod ule 132 Cooli ng fan s If these com pone nt s fail, they must b e repl ac ed. Please cont a ct the sy stem resell er or vendor to purchase replacemen t p arts. Replacement instructions f[...]

PC 5170 Flat Panel PC W ARNING! PLEASE T AKE ANTIST A TIC PREC AUTIONS WHEN WORKING WITH THE INTERNAL COM PONENTS. The interior of the PC 5170 contains very sensitive electronic componen ts. These co mponent s are easil y dam aged by electrost atic discharge (ESD). Before workin g with the intern al com ponent s, m ake sure all anti-stat ic p recau[...]

PC 5170 Flat Panel PC Figure 4-1: Rear Cover Retent ion Screws (Real Panel) 4.3.2 Detaching the Elevated Platform Please read t he warnings at the beginni ng of Section 4.3 before attempting to access a ny PC 5170 int ernal com ponents. The elevated platform su pports the FDD, CD drive and HDD. Back cover removal is discussed in Section 4.3.1 . To [...]

PC 5170 Flat Panel PC Figure 4-2: CD Drive Retention Screws Step 3: The elevated platform i s secured to the chassi s with fo urteen retenti on screws, four on the internal pl at form ( Figure 4-3 ), three on the top p anel ( Fi gure 4-4 ), three on the right pa nel ( Figure 4- 5 ), two on the bottom panel ( Figure 4-6 ) and two on the PCI rise r c[...]

PC 5170 Flat Panel PC Figure 4-5: Ele v ated Platform Retention Screw s (Right Panel) Figure 4-6: Ele v ated Platform Retention Screw s (Bottom Panel) Figure 4-7: Ele v ated Platform Retention Screws (PCI Riser Card) 4.4 DIMM Replacement Please read t he warnings at the beginni ng of Section 4.3 before attempting to access a ny PC 5170 int ernal co[...]

PC 5170 Flat Panel PC Step 2: Loc ate t he DIM M socke t on the motherboard near the right of the chassis. Push down on the white levers of the socket until the DIMM module is dislodged from the socket ( Figure 4-8 ). Figure 4-8: DIMM Socket Clip Locations Step 3: Slowly slide t he ne w DIM M module al ong the plastic guide s at bot h ends of th e [...]

PC 5170 Flat Panel PC Figure 4-9: PS U Moth erb oard Connec tors The PSU module i s secured to the PC 5170 flat panel PC with six retention scre ws, two conne ct to the bottom pa nel ( Figure 4-10 ), two con ne ct to the internal PSU bra cket ( Figure 4-12 ) which is connected to the cha ssis by two scre ws ( Figure 4-11 ). Step 4: Remove the PSU r[...]

PC 5170 Flat Panel PC Figure 4-11: PSU Bracket to Chassis Retention Scre ws Step 6: Remove the retention screws that c onnect the PSU to the PSU bracket ( Figure 4-12 ). Step 0 : Figure 4-12: PSU Brac ke t Rete ntion S crews 4.5.2 Install the New PSU To inst all a new PSU mod ule, plea se follow t he steps belo w. Step 1: Attach the PSU brack et to[...]

PC 5170 Flat Panel PC Step 2: Step 3: Step 4: Step 5: Step 6: Step 7: Insert the PSU modul e and bra cket assembly into th e cha ssis a nd attach the PS U b rack et to t he chassi s w it h t he previously re mov ed retentio n screws. Secure the PSU modul e to the cha ssis b y reinserting t he previou sly removed retention screws th rough the bottom[...]

PC 5170 Flat Panel PC Figure 4-13: Sy stem Cooling Fans Motherb o ard Connec tor Step 4: Remove the system cooling fans rete ntion screws from the left pane l ( Figure 4-14 ). Figure 4-14: Sy stem Cooling Fans Left Panel Re te ntion Scre w s Step 5: Remove the system coolin g fans from th e chas sis. Step 0: 4.6.2 Install the New Sy stem Cooling Fa[...]

PC 5170 Flat Panel PC Step 4: Step 5: Reatta ch the elevated plat f orm. Repla ce the back cover . Step 0: Page 80 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Chapter 5 5 AMI BIOS Page 81[...]

PC 5170 Flat Panel PC 5.1 Introducti on A licensed copy of AMI BIOS is preprogra mmed into the ROM BIO S. The BIOS setup program allo ws users to modify the basi c syst em configuratio n. This cha pter describe s how to acce ss the BIOS setup prog ram and the co nf ig ur ati on op ti on s t hat ma y be change d. 5.1.1 Starting Se tup The AMI BIOS i[...]

PC 5170 Flat Panel PC Key Function F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS chang es, only for Main Menu Table 5-1: BI OS Nav igation Key s 5.1.3 Getting Help When F 1 is presse d a sma ll help window de scribing the appropri ate keys to us e and the possible sele ction s for the highlighte[...]

PC 5170 Flat Panel PC 5.2 Main The Main BIOS menu ( BIOS Menu 1 ) appears whe n the BIOS Setup pro gra m is entere d. The Main menu gives a n o verview of the basi c sy stem information. BIOS Menu 1: Main Î Sy stem Ov ervie w The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed. [...]

PC 5170 Flat Panel PC 143 Sy stem Memory : Displays the auto-detected system memory . o Size : Lists m emory size The Sy st em Ov ervie w fi el d also has two use r configurabl e fields: Î System Time [xx:xx:xx] Use th e Syst em Ti me opt ion to se t t he sys tem time. Manually e nt er the ho urs, minutes and second s. Î System Date [xx/xx/xx] Us[...]

PC 5170 Flat Panel PC BIOS Menu 2: Adv anced Page 86 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC 5.3.1 CPU Configur ation Use the CPU Configu ration menu ( BIOS Menu 3 ) to view detailed CPU sp ecificati ons and configure the CPU. BIOS Menu 3: CP U Con fi guration The CPU Co nfiguration menu ( BIOS Menu 3 ) lists th e following CPU details: 153 Manufac turer : List s the n am e of the CPU manufactu rer 154 Brand S tring :[...]

PC 5170 Flat Panel PC The following CPU Co nfigu rati on me nu items can be configured. 159 Max CPUID V alue Limit 160 Hyper Thread ing T ech nology Î Max CUPID Value Limit [Disabled] NOTE: If the OS is NT , this value must be set to enabled. Î Disabled D EF AUL T Disables legacy OSes that cannot su pport CPUs with extended CUPID functions from b[...]

PC 5170 Flat Panel PC 5.3.2 IDE Configuration Use the IDE Configuration menu ( BIOS Menu 4 ) to change and/or set the configuration of the IDE devices installed in the sys tem. BIOS Menu 4: IDE Configuration Î IDE Configur ation [P-AT A Only ] Use IDE Configuratio n opti on to setup the c onfig uration of the hard drive interfa ces. Î Disabled Th[...]

PC 5170 Flat Panel PC Î S-ATA Ru nning Enhance d Mode [Yes ] Use S-ATA Running Enhanced Mode option to s elec t whet her t he S- ATA i nte rfac e is runnin g in enhan ced mo de or lega cy mode. Î Y es D EF AUL T The S-A T A interface is running in enh an ced mode. Î No The S-A T A interface is running in legacy mode. Î P-ATA Ch an nel Selection[...]

PC 5170 Flat Panel PC Î Hard Disk Write Protect [Disabled] The Hard Disk Write Prote ct BIOS option prot ect s the hard disks from being ov erwritten. This menu ite m is only effective if the de vice is acces sed through the BIOS. Î Disabled D EF AUL T Allows hard disks to be overwritten Î Enabled Preve nts hard dis ks from being o verwritten Î[...]

PC 5170 Flat Panel PC Î Host & D ev ice D EF AUL T Both the motherboa rd onboard IDE controlle r and IDE disk drive are used to detect the type of IDE cable used. Î Host The motherb oard onboar d IDE contro ller detect s the type of ID E cable used. Î Dev ice The IDE disk drive to detects the type of IDE cable used. Î IDE Master and IDE Sla[...]

PC 5170 Flat Panel PC 5.3.2.1 IDE Master , IDE Slave Use the IDE Master and IDE Slave configuratio n menu to view both prim ary and secon dary IDE device details and configure t he IDE d evice s con nected to the sy stem. BIOS Menu 5: IDE Master and IDE Slave Configuration Î Auto-Detected Dr iv e Paramete rs The “grayed -out” items in the left[...]

PC 5170 Flat Panel PC transfers of up to 64 KB per interrupt. 179 PIO Mode : Indicates the PIO mode of the installed device. 180 S.M.A.R.T . : Indicates whether o r not the Self-Monitori ng Analysis a nd Reporting T echn ology protocol i s suppo rted. 181 32Bit Dat a T ransfer : Enables 32-bit data transfer . Î Ty pe [Auto] Use the Type BIOS optio[...]

PC 5170 Flat Panel PC Î Disabled BI OS i s p rev en te d fr om using the LBA mode contro l on the specified cha nnel. Î Auto D EF AUL T BIOS auto detect s th e LBA mode control on the spe cified channel. Î Block (Multi Sector Tr ans fer) [Au to] Use the Bloc k (Mu lti Sect or Tr ansfer ) to disab le or en able BIOS to auto detect if the device s[...]

PC 5170 Flat Panel PC Î 4 PIO mode 4 selected wi th a maximum transfer rate of 16.6MBps (This setting generally works with all hard disk drive s manufactured after 1 999. For oth er disk drives, such as I DE CD- ROM drive s, chec k th e specifications of the drive.) Î S.M.A.R.T [Auto] Use th e S .M .A .R .T o pt io n to aut o-dete ct , d isable o[...]

PC 5170 Flat Panel PC 5.3.3 Floppy Con f i g u r a tio n Use the Floppy Configuration menu ( BIOS Menu 6 ) to set or change the configurations for floppy disk drives. BIOS Menu 6: Flo ppy Configuration Î Floppy A [1.44 MB 3½ ”] The Floppy A configuration option determines the typ es of the fl oppy drive installed in the sys tem . The follo wing[...]

PC 5170 Flat Panel PC 5.3.4 Super IO Configurati on Use the Super IO Co nfigur ation menu ( BIOS Menu 7 ) to set or cha nge the co nfiguratio n s for the FDD controllers, parallel port s an d serial po rts. BIOS Menu 7: Super IO Conf iguration Î On Board Floppy Controller [Enabled] Î Disabled Allows BIOS to disa ble the floppy controller Î Enabl[...]

PC 5170 Flat Panel PC Î 3F8/IRQ4 D EF AUL T Serial Port 1 I/O port address is 3 F8 and the interrupt address is IRQ4 Î 3E8/IRQ4 Serial Port 1 I/O port address is 3E8 and the interrupt address is IRQ4 Î 2E8/IRQ3 Serial Port 1 I/O port address is 2E8 and the interrupt address is IRQ3 Î Serial Port2 Address [2F8 /IRQ3] Use the Seri al Por t2 Ad dr[...]

PC 5170 Flat Panel PC Î Disabled No base address is assi gn ed to the Parallel Port Î 378 D EF AUL T Parallel Port I/O port add re ss is 378 Î 278 Parallel Port I/O port add re ss is 278 Î 3BC Parallel Port I/O port address is 3BC Î Parallel Port Mode [Normal] Use the Parallel Port Mode option to select t he m ode the parall el po rt operate s[...]

PC 5170 Flat Panel PC Î IRQ5 IRQ5 is assigned as the parallel port interrupt address Î IRQ7 D EF AUL T IRQ7 is assigned as the parallel port interrupt address Î Digital I/O Address [280h] Use the Digital I/O Address option to select the interrupt address for digital I/O. Î 200h Digital I/O ad dre ss is 200h Î 220h Digital I/O ad dre ss is 220h[...]

PC 5170 Flat Panel PC Î 10 Serial port 3 IRQ ad dre ss is 10 Î 11 D EF AUL T Serial port 3 IRQ ad dre ss is 1 1 Î Serial Port4 Address [2E 8] Use the Serial Port4 IRQ option to sele ct the interrupt addre ss for serial po rt 4. Î Disabled No base add ress is assi gned to serial p ort 4 Î 3E8 Serial port 4 I/O port addre ss is 3E8 Î 2E8 D EF A[...]

PC 5170 Flat Panel PC Î 2F0 D EF AUL T Serial port 5 I/O port add re ss is 2F0 Î 2E0 Serial port 5 I/O port addre ss is 2E0 Î Serial Port5 I RQ [11] Use the Serial Port5 IRQ option to sele ct the interrupt addre ss for serial po rt 5. Î 4 Serial port 5 IRQ ad dre ss is 4 Î 9 Serial port 5 IRQ ad dre ss is 9 Î 10 Serial port 5 IRQ ad dres s is[...]

PC 5170 Flat Panel PC 5.3.5 Hardw are Health Configuration The Hardware Health Configuration menu ( BIOS Menu 8 ) shows the operating temperature, fan speeds and system voltages. BIOS Menu 8: Hard w ar e Health Con fi guration Î H/W Health Function [Enabled] Î Disabled Disable s the health monitoring function Î Enabled D EF AUL T Enables the hea[...]

PC 5170 Flat Panel PC o Fan2 Speed o Fan3 Speed 190 V oltages : The followin g sy stem volt ages are m onitored o Vcore o +1.50V o +3.30V o +5.00V o +12.0V o 5VSB 5.3.6 ACPI Configurat ion The ACPI Configuratio n m enu ( BIOS Menu 9 ) configure s the Advanced Co nfigu ration and Power Interfa ce (A CPI) and Powe r Man agement (APM) option s. BIOS M[...]

PC 5170 Flat Panel PC 5.3.6.1 General AC PI Configuration Use the General ACPI Conf iguration menu ( BIOS Men u 10 ) to select the ACPI state when the system is su spe nded. BIOS Menu 1 0: General ACPI Configuration Î Suspend Mode [S1 (POS)] Use the Suspend Mod e op tion to specify the sl eep state the system enters wh en it is not being used. Î [...]

PC 5170 Flat Panel PC 5.3.6.2 Advanced AC PI Configuration Use the Advanced ACPI C onfiguration menu ( BIOS Menu 11 ) to sele ct the ACPI st ate when the syst em is suspended. BIOS Menu 11: Adv anced ACPI Configuration Î ACPI 2.0 Features [No ] Use the ACPI 2.0 Features option to enable the ACPI (Advanced Configuration and Power Interface) feature[...]

PC 5170 Flat Panel PC Î ACPI APIC Support [Ena bled] Use the ACPI APIC Support option to add a pointer to a n AC PI API C t abl e i n th e RS DT (Root System Description Table). The RSDT i s an a rray of poi nters that di rect the sy stem to the physi cal addre sses of other d escription tabl es. The RS DT is the mai n ACPI table. The RSDP is l oc[...]

PC 5170 Flat Panel PC Î Enabled D EF AUL T Pointers to the AMI OEMB table are provided in the RSDT and the XSDT Î Headless Mode [Disabled] Use the Headless Mode option to update the ACPI FACP (Fix ed ACPI Descripti on Table) to indicate headle ss operations, i.e. a co mput er witho ut a monitor, keyboard a nd mouse. Î Disabled D EF AUL T The F A[...]

PC 5170 Flat Panel PC 5.3.7 MPS Configur ation Use the MPS Configuration menu ( BIOS Menu 12 ) to s elect `he multi-processor table. BIOS Menu 12: MPS Conf iguration Î MPS Rev i sion [1.4] Use the Multiproce ssor Specification (M PS) fo r OS option to speci fy the MPS version to be used. Î 1.1 MPS version 1.1 is used Î 1.4 D EF AUL T MPS version[...]

PC 5170 Flat Panel PC Î Remote Access [Disabled] Use the Remote Acce ss option to ena ble or di sabl e access to the remote functio nalities of the system. Î Disabled D EF AUL T Remote a cce ss is disable d . Î Enabled Remote acce ss configurati on options shown below appear: Î Serial Port N umber Î Serial Port Mode Î Flow Cont rol Î Redirec[...]

PC 5170 Flat Panel PC 5.3.9 US B Configuration Use the USB Config uration menu ( BIOS Menu 13 ) to read USB co nfiguration informatio n and configure the USB settings. BIOS Menu 13: US B Co n figuration Î USB Configuration The USB Conf iguration field sho ws the system U SB con fi gu rat ion. T he i te ms l is ted ar e: 191 Module V ersi on: x.xxx[...]

PC 5170 Flat Panel PC Î Disabled USB function support di sab led Î 2 USB Port s USB function sup port two USB port s Î 4 USB Port s USB function support four USB port s Î 6 USB Port s USB function support six USB ports Î 8 USB Port s D EF AUL T USB function support eight USB ports Î Legacy USB Support [Dis abled] Use the Legacy USB Support BI[...]

PC 5170 Flat Panel PC 5.4 PCI/PnP Use the PCI/PnP menu ( BIOS Me nu 14 ) to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu m ay cau se th e system to m alfunction. BIOS Menu 14: PCI/PnP Configurat ion Î Plug & Play O/S [No] Use th e P lu g & Pl ay O/ S BI OS op ti on t[...]

PC 5170 Flat Panel PC Î No D EF AUL T If the operating system does not meet the Plug a nd Play specifications, this option al lows the BIOS to configur e all the devices in the sys tem. Î Y es Thi s setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the s ystem is running Plu g and Play aware op[...]

PC 5170 Flat Panel PC Î Palette Snooping [Disabled] Use the Palette Snooping option to enable or disable the palette snooping function. Î Disabled D EF AUL T Unless the VGA card manufacturer requires palette snoopin g to be enabled, this option shou ld be disabled. Î Enabled PCI devices are informed that an ISA based Graphics device is installed[...]

PC 5170 Flat Panel PC Î PCI Slot 2 PCI Slot 2 is selected a s the location of the Of fBoard PCI IDE adapter c ard. Only s elect this s lot if the adapter card is inst alled in PCI Slo t 2. Î PCI Slot 3 PCI Slot 3 is selected a s the location of the Of fBoard PCI IDE adapter c ard. Only s elect this s lot if the adapter card is inst alled in PCI S[...]

PC 5170 Flat Panel PC 203 IRQ7 204 IRQ9 205 IRQ10 206 IRQ 1 1 207 IRQ 14 208 IRQ 15 Î DMA Chan n el# [Av ailable] Use the DMA Channel# op tion to assi gn a spe c ific DMA channel to a particular PCI/PnP device. Î A vailable D EF AUL T The specified DMA is available to be used by PCI/PnP devices Î Reserv ed The specified DMA is reserved for u se [...]

PC 5170 Flat Panel PC Î Reserved Memor y Size [Disabled] Use th e Re se rv ed M em ory S ize BI OS o pti on to spe cify the amount of memory that shoul d be rese rved for legacy ISA devices. Î Disabled D EF AUL T No memory b lock re served for legacy ISA devices Î 16K 16KB reserved for legacy ISA devices Î 32K 32KB reserved for legacy ISA devic[...]

PC 5170 Flat Panel PC 5.5 Boot Use the Boot menu ( BIOS Menu 15 ) to configure system boot options. BIOS Menu 15: Boot Page 120 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC 5.5.1 Boot Settings Configur ation Use the Boot Settings Configuratio n men u ( BIOS Men u 16 ) to confi gure adva nce d system boot options. BIOS Menu 16: Boot Settings Configuration Î Quick Boot [Enabled] Use th e Q ui ck B oo t B IOS op ti on t o m ake the comput er spee d up the boot pro cess. Î Disabled No POST procedur[...]

PC 5170 Flat Panel PC Î Disabled D EF AUL T Normal POST messages displayed Î Enabled OEM Logo displayed instead of POST messages Î AddOn ROM Display Mode [For ce BI OS] Use the AddOn ROM Di splay Mode option to allow add-on ROM (read-onl y memory) messages to be displ ayed. Î Force BIOS D EF AUL T The system forces third party BIOS to display d[...]

PC 5170 Flat Panel PC Î Disabled PS/2 mouse support i s disabled a nd pr evented from using syst em resou rces. Î Enabled Allows the system to use a PS/2 mouse. Î Auto D EF AUL T The system a uto-adjust s P S/2 mouse su pport. 5.5.2 Boot Device Priority Use the Boot Device Priority menu ( BIOS Menu 17 ) to specify the boot se quence from the ava[...]

PC 5170 Flat Panel PC 5.5.3 Removable Dri ves Use the Rem ovable Drives menu ( BIO S Menu 18 ) to spe cify the boot seq uence of the available FD Ds. Whe n the menu is op ened, t he F DDs conn ecte d to the system are listed as shown bel ow: 218 1st Dri ve [1st FLOPPY DRIVE] NOTE: Only the driv es connected to the syst e m are sho wn . For exam ple[...]

PC 5170 Flat Panel PC 5.6 Security Use the Security menu ( BI OS Menu 19 ) to set system and user passwords. BIOS Menu 19: Securit y Î Change Supervisor Passw or d Use the Change Supervisor Password to set o r ch ange a superviso r password. The default for this option is Not Installed. If a sup ervisor pa ssw ord mus t be insta lled, s elect this[...]

PC 5170 Flat Panel PC 5.7 Chipset Use the Chipset m enu ( BIOS Menu 20 ) to access the NorthBridge and S outhBridg e configuratio n menus WARNING! Setting the wrong values for the Chip set BIOS selections in the C hipset BIOS menu may cause the syst em t o malfuncti on. BIOS Menu 20: Chipset Page 126 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC 5.7.1 NorthBridge Co nfi gur ati on Use the Nort hBridge Conf iguration menu ( BIOS Menu 21 ) to configure the n orthbridge chipset . BIOS Menu 21: NorthBridge Chipset Configurat ion Î DRAM Freq u ency [Auto] Use the DRAM Freque ncy option to specify t he DRAM frequen cy or allow the system to automatically detect the DRAM fr[...]

PC 5170 Flat Panel PC Î Configure DRAM Timing by SPD [Enabled] Use the Confi gure DRAM T iming by SPD option to de te rmi ne i f t he sy stem u se s th e S PD ( Serial Presence Detect) EEPROM to c onfigure the DRAM timing. The SPD EEPROM contains all necessary DIMM specification s incl uding the speed of the individual compone nts su ch a s CAS an[...]

PC 5170 Flat Panel PC Î Init. Graphic Adapter Pr iority [PCI/Int-VGA] The Init. Graphic Adapter Priority option selects the gr aphics controll er the system uses as a primary boot device . The options are: 223 Internal VGA 224 PCI/Int-VGA D EF AUL T Î Internal Graphics Mode Select [Ena ble, 8MB] Use the Internal Graphic Mode Select option to s pe[...]

PC 5170 Flat Panel PC Î Boot Display Devi ce [CRT +LFP ] Use the Boot Display Device option to select t he display device used by the system when it boots . Configuration options are listed below. 225 CR T 226 LFP 227 CR T+LF P D EF AUL T Î Flat Panel Ty pe [640 x48 0] Use the Flat Panel Type option to selec t the type of f lat panel connecte d t[...]

PC 5170 Flat Panel PC 5.7.2 SouthBridge Conf igu rat ion The SouthBri dge Configuration menu ( BIOS Menu 22 ) the sout hbrid ge chi pset to be configured. BIOS Menu 22: Sout hBridge Chipset Con figuration Î OnBoard AC97 Audio [Auto] Use the OnBoard A C97 Audio option to enable or disable the AC’9 7 CODEC. Î Auto D EF AUL T The onboa rd AC’97 [...]

PC 5170 Flat Panel PC 5.8 Power The Power m enu ( BIOS Menu 23 ) allows the advan ced po wer ma nagement options to be configured. BIOS Menu 23: Po wer Î Power Management/APM [Enabled] Use the Power Management/APM BIOS option to enable ac cess to the advanced power management features. If this option is disabled, the on ly othe r opt ion on t he s[...]

PC 5170 Flat Panel PC Î Video Pow er Do w n Mode [Suspend] The Video Power Down Mode BIOS option sp ecifies in what system mode the video device can be turned off. Î Disabled The Vi deo cannot be turned off in the Suspend or S tandby mode Î S t andby The video can be turned of f in the S tandby mo de Î Suspend D EF AUL T The video can be turned[...]

PC 5170 Flat Panel PC 244 20 Min 245 30 Min 246 40 Min 247 50 Min 248 60 Min Î Suspend Time Out [Disabled] The Suspend Time Out option specifie s what l ength of time without activity on certain compone nts will place those compone nts in a su sp ended state. The options are listed below: 249 Disabled Default 250 1 Min 251 2 Min 252 4 Min 253 8 Mi[...]

PC 5170 Flat Panel PC Î Resto re o n AC Po w e r L o ss [L ast Sta te ] Use the Restore o n AC Power Lo ss option to sp ecif y what state t he system returns t o if there is a sud den loss of p ower to the system. Î Power Off The system remain s turne d of f Î Power On The system turn s on Î Last S t ate D EF AUL T The system r eturns t o it s [...]

PC 5170 Flat Panel PC Î Disabled D EF AUL T The real time clo ck (R TC) can not ge nerate a wa ke event Î Enabled If selected, the following appears with values that can be sel ected: Î RTC Alarm D at e (Day s) Î Sy stem Time After setting t he alarm, the comp uter tu rns it self on from a susp e nd state whe n the alarm goes of f. 5.9 Exit Use[...]

PC 5170 Flat Panel PC Î Save Changes and Ex it Use the Save Changes an d Exit option to save the change s made to the BIOS options and to exit the BIOS configuration setup program. Î Discard Cha nges and Ex it Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system. Î Dis[...]

PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 138 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Appendix A A ACNODES Panel PC Product Line[...]

Page 139[...]

PC 5170 Flat Panel PC A.1 ACNODES Panel PC Product s A.1.1 Overview ACNODES panel PC products are fle xible, multi-functional flat panel PCs that can be applied in d ive rse operati onal envi ronment s and i mpleme nted in multi- faceted applications . ACNODES panel PC p roduct s co me full y kitte d wit h hig h-per forma nce mot her boards , CPUs,[...]

PC 5170 Flat Panel PC Model PPC-2706GS LCD Size 6.5” TFT LCD 8.4” TFT LCD Max. Resolution 640 x 480 800 x 600 Brightness 400 cd /m2 220 cd /m2 LCD Color 262K 262K View i ng A ngle 120/100 120/100 Backlight MTBF 50000hrs 20000hrs SBC Mode l WAFER-LX800 WAFER-LX800 CPU AMD LX800 AMD LX800 RAM 1 x DDR 333/400MHz SO DIMM sock e t up to 1GB 1 x DDR [...]

PC 5170 Flat Panel PC A.2.2 PPC-37 Se ries Panel PC Sol utions All the models listed in the table below support Intel  Pentium® M / Celeron ® M / ULV Celer on ® M 1GHz/80 0MHz CPUs. Model PPC-3708GS PPC-3710GS PPC-3715GS LCD Size 8.4” TFT LCD 10.4” TFT LCD 12.1” TFT LCD 15” TFT LCD 17” TFT LCD Max. Resolution 800 x 600 800 x 600 800[...]

PC 5170 Flat Panel PC Model PPC-3708GS PPC-3710GS PPC-3715GS 2 x SATA 2 x SATA 2 x SATA 2 x SATA 2 x SATA SSD CF Type II CF Type II CF Type II CF Type II CF Type II Expansion Slot N/A N/A N/A 1 x PCI 1 x PCI HDD Driv e Bay 1 x 2.5” SATA/I DE HDD 1 x 2.5” SATA/I DE HDD 1 x 2.5” SATA/I DE HDD 1 x 3.5” Removable SATA/I DE HDD, 1 x 2.5” SATA/[...]

PC 5170 Flat Panel PC A.2.3 PPC-51 Se ries Panel PC Sol utions All the models listed in the table below supp ort Intel  Pentium® 4 / Celeron® D CPUs up to 2.8GHz. Model PPC-5150GS LCD Size 15” TFT LCD 17” TFT LCD 19” TFT LCD Max. 1024 x 786 1280 x 1024 1280 x 1024 Resolution Brightness 350 cd/m 2 300 cd/m 2 300 cd/m 2 LCD Color 262K 16.2[...]

PC 5170 Flat Panel PC Model PPC-5150GS w/o Anti-Sho ck w/o Anti-Sho ck w/o Anti-Sho ck FDD Driv e Ba y 1 x Slim FDD 1 x Slim FDD 1 x Slim FDD CD-ROM 1 x Slim CD-R OM 1 x Slim CD-R OM 1 x Slim CD-R OM Driv e Bay Powe r Supply 180W ATX Po wer 180W ATX Po wer 180W ATX Po wer Mounting Stand/ Rack/ Wall/Panel/ Arm Stand/ Rack/ Wall/Panel/ Arm Stand/ Rac[...]

PC 5170 Flat Panel PC Model PPC-5150GS Celer on ® D Celer on ® D Celer on ® D RAM 2 x DDR 400MHz DIMM so cket up to 2GB 2 x DDR 400MHz DIMM so cket up to 2GB 2 x DDR 400MHz DIMM so cket up to 2GB I/O Ports 1 x RS-232/422/485 1 x RS-232/422/485 1 x RS-232/422/485 3 x RS-232 3 x RS-232 3 x RS-232 4 x USB 2.0 6 x USB 2.0 6 x USB 2.0 2 x PS/2 2 x PS[...]

PC 5170 Flat Panel PC A.2.5 PPC-53 Se ries Panel PC Sol utions All the models listed in the table below support Intel  Pentium® M / Celeron ® M / ULV Celer on ® M 1GHz/80 0MHz CPUs. Model PPC-5350GS LCD Size 15” TFT LCD Max. Resolution 1024 x 786 Brightness 350 cd /m2 LCD Color 262K View i ng A ngle 120/100 Backlight MTBF 50000hrs SBC Mode [...]

PC 5170 Flat Panel PC HDD Driv e Bay 1 x 2.5” SATA/ID E HDD CD-ROM 1 x Slim CD-R OM Driv e Bay Powe r Supply 150W ATX Power Mounting Stand/ Rack/ Wall/Panel/ Arm Dimension (W xDxH) mm 410 x 309 x 110 Weight 8/12kg Front Pane l Prot ection IP 65 compliant Touch Screen Resistive Type 5-wi re wi th RS-232 Interface Table A-5: PPC-53 Ser ies Panel PC[...]

PC 5170 Flat Panel PC Appendix B B Interface Connectors Page 149[...]

PC 5170 Flat Panel PC The PC 5170 flat panel PC EMBEDDED motherboa rd come s with a number of per ipher al interface connectors and conf igu rati on jump ers list ed in Chapte r 2 . The pinouts for these connectors are lis ted below. B.1 Floppy Disk Drive Connector EMBEDDED board is e quipped with a 34 -pin dai sy-chai n driver con nector cabl e. P[...]

PC 5170 Flat Panel PC B.2 PCI E-IDE Disk Drive Connector Four IDE (Integrate d Dev ice Electroni cs) ha rd disk drives can be attache d to the EMBEDDED IDE controller . IDE1, IDE2: Primary , Secon dary IDE Connector PIN Description PIN Description 1 RESET# 2 GND 3 DATA 7 4 DATA 8 5 DATA 6 6 DATA 9 7 DATA 5 8 DATA 10 9 DATA 4 10 DATA 11 11 DATA 3 12[...]

PC 5170 Flat Panel PC B.3 Parallel P ort This port i s usually con ne cted to printe r . The E MB E DD ED include s one on-b oard pa rallel port, accesse d throug h 25-pin D-type fe male connect or LPT1. LPT1: (LPT1 DB-25 Femal e) Parallel Port Conne ctor PIN Description PIN Description 1 STRO BE# 2 DATA 0 3 DATA 1 4 DATA 2 5 DATA 3 6 DATA 4 7 DATA[...]

PC 5170 Flat Panel PC CN20 A: Seri al Port DB-9 Male Conne ctor ( CO M 1) PIN Description 1 DATA CARRIE R DETECT (DCD) 2 RECEIV E DATA (RX D) 3 TRANSMIT DATA (TXD) 4 DATA TERMI NAL READY (DT R ) 5 GROU ND (GN D) 6 DATA SET R EADY (DSR) 7 REQUEST TO SEND (RTS) 8 CLEAR TO SE ND (CTS) 9 RING INDICATOR (RI) COM2: Serial Port 2 x 5 Pin Header Connect or[...]

PC 5170 Flat Panel PC RS-485 Mod e PIN Description PIN Description 1 RTX- 2 NC 3 RTX+ 4 NC 5 NC 6 NC 7 NC 8 Voltage 9 NC 10 NC CN20 B: Seri al Port DB-9 Male Conne ctor ( CO M 2) COM2 sup po rts three mo des: RS-232, RS -4 22 and RS-485 (via DB-9 Con nec tor). RS-232 Mod e PIN Description PIN Description 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTX 4 DTR 9 [...]

PC 5170 Flat Panel PC RS-485 Mod e PIN Description PIN Description 1 RTX- 6 NC 2 RTX+ 7 NC 3 NC 8 NC 4 NC 9 Voltage 5 NC COM3: Seria l Port 2x5 Pin Head er Co nnector PIN Description PIN Description 1 DCD 2 DSR 3 RXD 4 RTS 5 TXD 6 CTX 7 DTR 8 RI 9 GND 10 NC COM4: Seria l Port 2x5 Pin Head er Co nnector PIN Description PIN Description 1 DCD 2 DSR 3 [...]

PC 5170 Flat Panel PC CN22: Serial Port DB-9 Male Connector (COM4) PIN Description 1 DATA CARRIE R DETECT (DCD) 2 RECEIV E DATA (RX D) 3 TRANSMIT DATA (TXD) 4 DATA TERMIN AL READ Y (DT R ) 5 GROU ND (GN D) 6 DATA SET R EADY (DSR) 7 REQUEST TO SEND (RT S) 8 CLEAR TO SE ND (CTS) 9 RING INDICATOR (RI) COM5: Seria l Port 2x5 Pin Head er Co nnector PIN [...]

PC 5170 Flat Panel PC B.5 Keyboard / Mouse Connector The EMBEDDED provide s one keybo ard and one mo use box heade r con nector , as well as external PS/2 keyboard an d mouse co nnecto rs. CN23A (Purpl e): Extende d Key board 6-pin Mini Din Connector PIN Description 1 KB DATA 2 NC 3 GND 4 VCC 5 KB CLOCK 6 NC CN23B (Green): Extend ed Mouse 6-pin Min[...]

PC 5170 Flat Panel PC CN15: PS/2 Mouse 5-pin Head er Co n nector PIN Description 1 MS CLOCK 2 MS DATA 3 N/C 4 GND 5 +5V B.6 External Switches and Indicato rs CN8: Multi Panel PIN Description PIN Description 1 SPEAK ER 11 POWE R-VC C 2 N/C 12 N/C 3 N/C 13 GND 4 +5V 14 KEYLOCK 5 RESET SW 15 GND 6 GND 16 GND 7 IDE LED - 17 N/C 8 IDE LED+ 18 ATX PO WER[...]

PC 5170 Flat Panel PC B.7 USB Port Connector The EMBEDDED has ei ght built-in USB port s for the future I/O bus ex pan sion. CN26, CN27, CN28: 8-PIN Header USB Connectors PIN Description 1 8 VCC 3 6 USBD0- 5 4 USBD0+ 7 2 GND CN25: 2 Exte rnal USB Connectors PIN Description 1 5 VCC 2 6 USBD0- 3 7 USBD0+ 4 8 GND Page 159[...]

PC 5170 Flat Panel PC B.8 IrDA Infrared Interface Port The EMBEDDED has a buil t-in IrDA port that sup ports S erial Infra red (SIR) or Amplitude Shi f t K ey ed I R (A S KIR ) int erfa ces. T o use th e I rDA por t, con fi gur e t he FI R or ASK IR model in the Peripheral Setup COM2 i n BIOS. Then the norma l RS-232 COM2 will be disabled. IR1: IrD[...]

PC 5170 Flat Panel PC B.9 VGA Connector The EMBEDDED provides one DB -15 f emale conn ector a nd on e built-in 10-pi n VGA box head er conn ector that can be co nnected dire ctly to a monoch rome CRT monitor as well as high re solutio n color CR T monitor . VGA1: DB-1 5 Female VGA Co nnec tor PIN Description PIN Descrip tion 1 RED 2 GREEN 3 BLUE 4 [...]

PC 5170 Flat Panel PC B.10 LAN RJ45 Connector The EMBEDDED is equipp ed with two Gigabit Ethernet Controlle r R TL81 10SC chip sets and tw o G bE L AN RJ- 45 c on ne c t or s. CN31: Dual LAN RJ45 Connecto r PIN Description PIN Description 1 TX+ ( or MDX0+) 5 N/C (or MD X2- ) 2 TX- (or MDX0-) 6 RX- (or MDX1-) 3 RX+ (or MDX 1+) 7 N/C (or MDX3+) 4 N/C[...]

PC 5170 Flat Panel PC F AN2: Sy stem Fan Connector PIN Description 1 GND 2 +12V 3 Fan Sensor F AN3: Sy stem Fan Connector PIN Description 1 GND 2 +12V 3 Fan Sensor B.12 Inverter (LC D Ba cklight) Conn ector CN12: Inverter (LCD Backlight) Connector PIN Description PIN Description 1 NC 2 GND 3 +12V 4 GND 5 ENABKL Page 163[...]

PC 5170 Flat Panel PC B.13 LCD Panel L VDS Interface Connector The EMBEDDED provides up to 48-bit color TFT LCD. CN3 0: D F13-30 DP-1. 25 L VDS Interface Connector PIN Description PIN Description 1 GND 2 GND 3 A0P 4 A0M 5 A1P 6 A1M 7 A2P 8 A2M 9 CLK1 P 10 CLK1 M 11 A3P 12 A3M 13 GND 14 GND 15 A4P 16 A4M 17 A5P 18 A5M 19 A6P 20 A6M 21 CLK2 P 22 CLK2[...]

PC 5170 Flat Panel PC CN2: Audio LINE OUT (2.54mm) PIN Description PIN Description 1 LINEOUT_L 2 GND 3 GND 4 LINE OUT_R CN24: Audio Jack Color Descrip tion RED MIC IN BLUE LINE IN GREEN SPEAK OUT B.15 Digit al Input / Output CN6: Digital Input / Output PIN Description PIN Description 1 GND 2 +5V 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3[...]

PC 5170 Flat Panel PC B.16 Comp act Flash TYPE I I S torage Card Socket The EMBEDDED configures Comp act Flas h TYPE II S t orage Card in IDE Mode. CF1: Compact Flash TYPE II Socket PIN Assignment PIN Description PIN Description 1 GROUND 26 CARD DETE CT1 2 D3 27 D11 3 D4 28 D12 4 D5 29 D13 5 D6 30 D14 6 D7 31 D15 7 CS1# 32 CS3# 8 N/C 33 N/C 9 GROUN[...]

PC 5170 Flat Panel PC B.17 A TX Power Connector PW2 is a 20-pin A TX powe r supply con nector with the following pin assignme nt s. PW2: A TX Po w er Supply Connector PIN Description PIN Des cription 11 3.3V 1 3.3V 12 -12V 2 3.3V 13 GND 3 GND 14 PS-ON 4 +5V 15 GND 5 GND 16 GND 6 +5V 17 GND 7 GND 18 -5V 8 Powe r good 19 +5V 9 5VSB 20 +5V 10 +12V B.1[...]

PC 5170 Flat Panel PC NOTE: The powe r from PW1 sho uld sup port at l east a 6.5A current for the P4 CP U. If the power ou tput is too low , the CPU m ay not function normally . Be sure the power from the powe r supply is suf f icie nt, and don’ t sha re thi s po wer with othe r device s, such as hard disk etc. Use A CNODES’ s special A TX powe[...]

PC 5170 Flat Panel PC Appendix C C BIOS Configuration Options Page 169[...]

PC 5170 Flat Panel PC C.1 BIOS Configuration Options Below is a list of BIOS conf iguratio n options descri bed in Chapter 5 . Î System O vervie w ....... ...................... ...................... ...................... ...................... ....84 Î System Time [xx:xx:xx] .............. .......... ........ ........... ........ ........ ....[...]

Page 170 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Î Parallel Port Mode [Normal]................ ........ ...... ..... ........ ...... ........ ...... ..... ........ ... 100 Î Parallel Port IRQ [I RQ7]........... ...... .. ... ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..... ... ... ..... . 100 Î Digital I/O A ddress [280h] ....... ............... ..........[...]

PC 5170 Flat Panel PC Î PCI Latency Time r [64] .................. ......... ..... ........ ...... ..... ......... ..... ........ ...... ..... ... 115 Î Allocate IRQ to PCI VGA [Yes ] .............................. ...................... ...................... 115 Î Palette Snoopi ng [Disabled] ........................ ...... ..... ........ ....[...]

PC 5170 Flat Panel PC Î Resume on PME# [Disabled] .............. ..... ......... ..... ...... ........ ..... ......... ..... ...... ..... 135 Î Re sume On RTC A larm [Disabled].......... ......... ........... ........ ........... ........ ........ ... 135 Î RTC Alarm Date (Days) .......... ........ ......... ........... ........ ........ .......[...]

PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 174 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Appendix D D Software Drivers Page 175[...]

PC 5170 Flat Panel PC D.1 Introduct ion The touch p a nel controller enabl es anal og resist ive touch p anels for four-wire, five-wi r e & eight-wire models. The co ntroller dire ctly co mmuni ca tes with the PC system th roug h the tou ch panel commun ication s in terface. Th e con troller design is superior in sensitivity , accuracy , and fr[...]

PC 5170 Flat Panel PC Figure D-1: Driv er CD Pop Up Screen Step 3: S ele ct t he o pera tin g sys tem in stall ed on the system from the menu on the left side of the screen. NOTE: The following description is for dri ver inst allation using a Win do ws 2000 OS. If a dif ferent OS is inst alled, please refer to the d river user m anual for the rele [...]

PC 5170 Flat Panel PC Figure D-2: Install Shield Wizard Prep aration Step 5: After the Install Shield Wiza rd is rea dy , a welcome screen ap pears ( Figur e D-3 ). Figure D-3: Welcome Screen Step 6: Step 7: T o continue the installation process click N EXT . An Inst all PS/2 interface d river screen appea rs ( Figure D-4 ). It is not nec es sa ry [...]

PC 5170 Flat Panel PC Figure D-4: Install PS/2 Interface Driver Step 8: Four point cal ibration o ptions are then se lected. Four point cali brations can b e done every time a user boots up, during t he next time the system boots or never . Select when a four-p oint calibration sh ould be done. Click N EXT to continue. Page 179[...]

PC 5170 Flat Panel PC Figure D-5: Install PS/2 Interface Driver Step 9: The user is then prompted to ensure the touch moni tor or the USB for the to uch controller is p lugge d into the system ( Figure D-6 ). On ce the touch controlle r is plugged into the syste m, cli ck OK . Figure D-6: T ouch Monitor/USB T ouch Controller Confirmation Step 10: T[...]

PC 5170 Flat Panel PC Figure D-7: Cont roller Installation Directory Step 11: The user is then p rompted to select a fil e d irec tory in wh ich th e pr ogra m icons are saved ( Figure D-8 ). Th e default folder is “T ouchKit.” If a dif ferent folder must be used, select a folder from the list s hown. O nce th e fold er i s se lected , clic k N[...]

PC 5170 Flat Panel PC Figure D-8: Program Icon Directory Step 12: The program then st a rt s inst alling ( Figure D-9 ). Figure D-9: Installing Page 182 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC Step 13: Once the pro gram is finish ed inst alling, the user is pro mpted to rest art the computer n ow or to rest art the computer later ( Figure D-10 ). Select when the computer sho uld be rest arted and click F INISH to complete the driver installation proced ure. Figure D-10: Installation Complete D.3 T ouch Pa nel Driver[...]

PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 184 ACNODES ® Corp.[...]

PC 5170 Flat Panel PC E Index Page 185[...]

PC 5170 Flat Panel PC A Applications ......................... ................ ......20 Arm Mountin g ..... ........... ............... ........... ..63 A TX 12 V Power Connector ......................167 A T X Power Connector ... ........... ...............167 Audio Connectors ........ ............ ................164 Audio Port C onnection..... [...]

PC 5170 Flat Panel PC L LAN RJ45 Connector......... ............. .........162 LCD Panel Connection .... ........... ...............66 LCD Panel L VDS In terface Connector ....164 LCD V oltage Setup ..................... ...............50 M Maintenance and Cl eaning .... .. ... ..... ... ..... ... .4 Model V ariat i on .. ..... ... ..... ... .. .. [...]