ADTRAN Quad T1 IMA manuel d'utilisation

T ot al Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Inst allation and Maintenance Practice Document Number: 61 179641AL1-5C CLEI Number: V AMDA00A_ _ September 2007 1 2 3 4 T1/ E1 ®[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice ii 61179641AL1-5C Front Matter T r ademar ks Any brand names and product names included in this document are trademarks, register ed trademarks, or trade names of their respective holders. T o the Holder of the Document The contents of this document are c[...]

61179641AL1-5 C iii R e vision Histor y Con v entions The following typographical conventi ons are used in this document: This font indicates a cross-reference link. This font indicates screen menus, fields, and parameters. T HIS FONT indicates keyboard keys ( E NTER , E SC , A LT ). Keys that are to be pressed simultaneously are shown with a plus [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice iv 61179641AL1-5C T r aining ADTRAN offers training cour ses on our produc ts. These courses includ e overviews on product features and functions while covering applic ations of ADTRAN prod uct lines. ADTRAN provides a variety of training options, includi[...]

61179641AL1-5 C v Contents Section 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice vi 61179641AL1-5C Section 4 Provisioning Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Contents 61179641AL1-5 C vii Test IP Address Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-66 Time/Date Adjust Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-67 Current Baud Rate Menu . . . . . . . .[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice viii 61179641AL1-5C DSL Provisioning Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-139 ADSL Profiles Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Figures 61179641AL1-5 C ix Figures Figure 1-1. Total Access 1248 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -1 Figure 1-2. Total Access 1248 Front Panel LE Ds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Figure 2-1. To[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice x 61179641AL1-5C Figure 5-25. ATM Port Cell Count Sum mary Sc reen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42 Figure 5-26. ATM OA M Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Figures 61179641AL1-5 C xi Figure 5-72. E1 PM Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-108 Figure 5-73. E1 Performance Monitoring Status Scree n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-109 Figure 5-74. E1 Test Menu . . [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice xii 61179641AL1-5C Figure 5-119. Select Shelf Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-169 Figure 5-120. ADSL DELT Menu . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Tables 61179641AL1-5 C xiii T a bles Table 1-1. Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Table 1-2. Compliance Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Tab[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice xiv 61179641AL1-5C Table 5-36. Static IP Settings - f or IP over Ethernet Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-61 Table 5-37 . Resto re IP Factory Defaults Me nu Opt ion . . . . . . . . . . . . . . . . . . . . . .[...]

Tables 61179641AL1-5 C xv Table 5-83. Operation Mode for Fa cility Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-118 Table 5-84. IMA Group Provisioning Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-119 Table 5-85. IMA Sho rtcut Setup Menu Optio[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice xvi 61179641AL1-5C This page is intentionally blank.[...]

61179641AL1-5 C 1-1 Section 1 Intr oduction GENER AL The Total Access 1248 (see Figure 1-1 ) is a Digital Subscriber Line Access Multiplexer (DSLAM) system that is used to further extend Asymmetrical Digital Subscriber Line (ADSL) services in the network. Figure 1-1. Total Access 1248 ALARM CRAFT PWR ALM TOP:POTS BOTTOM: ADSL+POTS PORTS 1-24 TOP:PO[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 1-2 61179641AL1-5C DESCRIPTION The Total Access 1248 is a mini-D SLAM that accepts up to four T1 network feeds assigned to a single IMA group. Inverse Multip lexing over ATM (IMA) is a tec hnology used to bond multiple (DS1) links into a single data pipe.[...]

Description 61179641AL1-5 C 1-3 F r ont Panel LEDs Figure 1-2 shows the location of the Total Access 1248 front panel LEDs. Upon initial powering, the Total Access 1248 system perfor ms a power up self-test. Once the power up self-test is complete, the status LEDs reflect the condition of the hardware. Figure 1-2. Total Access 1248 Front Panel LEDs[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 1-4 61179641AL1-5C Compliance CA UTION Electrostatic Discharge (ESD) can damage electronic modules. When handling modules, we ar an antistatic discharge wrist strap to prevent damage to electron ic c omponents. Place modules in antistatic packing material[...]

Description 61179641AL1-5 C 1-5 CA UTION Per GR-1089-CORE the Total Acce ss 1248 is designed and intended for installation as pa rt of a Common Bonding Network (CBN). The Total Access 1248 is not designed nor intended for installation as part of an Isolated Bo nding Network (IBN). CA UTION Per GR-1089-CORE Section 9, the Tota l Access 1248 is inten[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 1-6 61179641AL1-5C This page is intentionally blank.[...]

61179641AL1-5 C 2-1 Section 2 A pplica tion Guidelines INTRODUCTION The Total Access 1248 provides 48 ADSL2+ plus POTS ports downstream to the subscriber, one to four T1 IMA ports upstre am to the network, local and re mote management capabilities, and front panel LEDs that indicate status. Fig ure 2-1 illustrates an operati onal scenario for the T[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 2-2 61179641AL1-5C EXPANSION Up to four Total Access 1248 syst ems can be connected together (see Figure 2-2 ). One of the units must be a Total Access 1248 Host unit (e.g., P/N 117964 1AL1) and the others are Total Access 1248 Client un its (P/N 1179641L[...]

61179641AL1-5 C 3-1 Section 3 Installa tion INTRODUCTION CA UTION Electrostatic Discharge (ESD) can damage electronic units. When handling units, wear an antistatic discharge wrist strap to prevent damage to electronic components. Pl ac e units in antistatic packing material when transporting or storing. When working on units, always place them on [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-2 61179641AL1-5C Shipping Contents The shipping container for the Total Ac cess 1248 includes the contents shown in Table 3-1 . R equired T ools The following tools and materials are requ ired to install the Total Access 1248: •W i r e - w r a p t o o[...]

Installation Prerequisites 61179641AL1-5 C 3-3 INSTALLA TION PR EREQUISITES The following items should be completed pr ior to installing the Total Access 1248: 1. Make sure that the network feed is in place. 2. Make sure that local power is available and that the required fuses are insta lled. CA UTION The maximum power draw for th e Total Access 1[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-4 61179641AL1-5C INSTALLA TION STEPS The following steps are required to install the Total Access 1248. Each step has an associated procedure which is referenced below the step. Each procedure provides detailed information for completing the step. 1. Mo[...]

Installation Steps 61179641AL1-5 C 3-5 Mounting the T otal Access 1248 The Total Access 1248 is shipped with two sets of mounting brackets that accommodate either a 19-inch or 23-inch rack. • The mounting brackets u sed for a 19-inch rack are part number 32 65540. • The mounting brackets u sed for a 23-inch rack are part number 32 65541. The mo[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-6 61179641AL1-5C Flush-mount For flush-mount system s, the Total Access 1248 must be mounted from the front of th e rack, with mounting brackets in the flush-mounting orientation (see Figure 3-2 ). When flush- mounting a Total Access 1248 in the rack, u[...]

Installation Steps 61179641AL1-5 C 3-7 Mid-mount For mid-mount systems, the Tota l Access 1248 must be mounted from the front of the rack, with mounting bracke ts in the mid-mounting o rientation (see Figure 3-3 ). For mid-mounting a Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the mounting brackets to the rear screw[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-8 61179641AL1-5C Gr ound Connection The ground wire must b e 12 to 18 AWG, however, it must be as large or larger than the wire used for power. The Total Access 1248 must be grounded to a reliable grounding source. To connect the ground wire, perform th[...]

Installation Steps 61179641AL1-5 C 3-9 P o wer Connection The Total Access 1248 provides redu ndant power inputs. Two sources of – 48 VDC must be provided to use the redundant power fe atur e. The power wires mu st be 12 to 18 AWG stranded copper. The Total Access 1248 uses a four-point terminal block (see Figure 3-5 ) to accept the –48 VDC and[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-10 61179641AL1-5C F ans/F an Filter The Total Access 1248 is shipped with a pre-ins talled fan module (P/N 1179675L1) . The fan module is located o n the right side of t he unit, and contains fo ur fans (see Figure 3-6 ). The fans move filtered air (if [...]

Installation Steps 61179641AL1-5 C 3-11 Ether net Connection The Total Access 1248 interfaces with networks for management through an Ethernet port (see Figure 3-7 ). Figure 3-7. Total Access 1248 Ethernet Port The following Ethernet protocols are supported: • IEEE 802.3, 10/100Base-T • DHCP Client Mode for Management •S N M P PWR ALM P O RT [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-12 61179641AL1-5C Alar m Connections The Total Access 1248 provides an alarm port (see Figure 3-8 ) with three auxiliary alarm inputs and three alarm outp uts (Major, Minor, and Critical). If load shedding is active then the Critical a larm output will [...]

Installation Steps 61179641AL1-5 C 3-13 Netw or k Connections Network connections are accomplished via the 50-pin amphenol connector labeled T1/E1 1-4 (see Figure 3-9 ) . See Table 3-4 for the pinout of the T1/E1 interface and the analog modem. Figure 3-9. Total Access 1248 Network Connection T able 3-4. T1/E1/Modem Interface Pinout Pin Numbers Des[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-14 61179641AL1-5C ADSL2+ Plus PO TS Connections The Total Access 1248 utilizes four 25-pair amphenol connectors (see Figure 3-10 ), which are used as follows: • Two amphenols for connection to the POTS pairs • Two amphenols for connection to the ADS[...]

Installation Steps 61179641AL1-5 C 3-15 PO TS Connection The Total Access 1248 must be connected to a POTS source to pr ovide POTS to the subscribers. In a standard conf iguration, the POTS will be br ought in from a nearby cross- connect. The Total Access 1248 accepts the POTS signal on the top two amphenol connectors labeled POTS. There i s a one[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-16 61179641AL1-5C T able 3-5. POTS and ADSL+PO TS Ca ble Pin Assignments f or Left-most Connector s Pair # Pins R.T . Pair # Pins R.T . 1 1, 26 13 13, 38 2 2, 27 14 14, 39 3 3, 28 15 15, 40 4 4, 29 16 16, 41 5 5, 30 17 17, 42 6 6, 31 18 18, 43 7 7, 32 1[...]

Total Access 1200F Conversion 61179641AL1-5 C 3-17 T OTAL ACCESS 1200F CON VER SION CA UTION The order of subtended Total Acc ess 1200 Se ries DSLAMS must be preserved when connecting to the Total Access 1200F for transla- tion to the legacy ATM mode PVCs. See Table 3-7 . Existing Total Access 1200 Series DSLAM insta llations require a softwa re up[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-18 61179641AL1-5C 3. Press and hold the Y key on the terminal keyboard an d apply power to the Total Access 1200 Series DSLA M. 4. When pro mpted, select 38 400 for a fast er transfer ra te (20 minutes at 384 00 compared to 60 minutes at 96 00). If usin[...]

Quick Turn-up Steps 61179641AL1-5 C 3-19 QUIC K T UR N-UP STEPS Perform the following steps to complete a basic T1 turn-up of the Total Access 1248 system: 1. Connect VT100 t erminal or personal computer emulating a VT100 terminal to the Total Access 1248 craft port. For more information, ref er to “Craft Interface” on page 5-1. 2. Press C TRL [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-20 61179641AL1-5C Figure 3-13. Total Access 1248 Main Menu 5. Provision the ap propriate network terminat ion. 6. From the Total Access 1248 Main menu, select Network Port , and press E NTER . The Network Port menu (see Figure 3-14 ) displays. Figure 3-[...]

Quick Turn-up Steps 61179641AL1-5 C 3-21 8. The T1 Main Menu (see Figure 3-15 ) displays. Figure 3-15. T1 Main Menu 9. From the T1 Main Menu, select T1 Provisioning , and press E NTER . The T1 Provisioning menu (see Figure 3-16 ) displ ays. Figure 3-16. T1 Provisioning Screen TID: HSVL00001 Total Access 1 248 MM/DD /YY HH:MM Unacknowledged A larms:[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-22 61179641AL1-5C 10. From the T1 Provisioni ng menu, configure the Ty p e , Framing , Line Code , and Line Build Out setting to match the settings of the T1s provided. Press N to access the next T1 to configure and continue this process until all the T[...]

Quick Turn-up Steps 61179641AL1-5 C 3-23 30. Add the IP addr ess to the network rou ters/servers. 31. Press E SC until the System Management menu displays. 32. From the System Management menu, select T est IP Address , and press E NTER . The Test IP Address menu is displayed (see Figure 3-17 ). Figure 3-17. Test IP Address Menu 33. From the Test IP[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 3-24 61179641AL1-5C This page is intentionally blank.[...]

61179641AL1-5 C 4-1 Section 4 Pr o visioning Defaults INTRODUCTION The Total Access 1248 system default provisioning options are sh own in Table 4-1 . For detailed information o n the Total Access 1248 menus, refer to “Section 5, User Interface” . T able 4-1. Default Pr o v isioning Options Provisioning Option A vailable Options Default Settin [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 4-2 61179641AL1-5C IP Address IP Feed RFC1483 Routed; IP over Ethernet; RFC1483 Bridged RFC1483 Routed IP Mode Dynamic; Static Dynamic IP Address 0–255.0–255.0–2 55.0–255 0.0.0.0 Subnet Mask 0–255.0–255.0–255.0–255 0.0.0. 0 Default Gateway[...]

Introduction 61179641AL1-5 C 4-3 External Alarms Alarm Name 25-character string External Alarm Input # Alarm Severity Critical; Major; Mi nor; Load shedding Minor Fan Alarm Delay 0–15 minut es 10 Minutes Network Port E1 Provisioning E1 Framing FAS; FAS+CRC FAS+CRC E1 Line Code HDB3; AMI HDB3 T1 Provisioning T1 Type DSX; T1 DSX T1 Framing ESF; SF [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 4-4 61179641AL1-5C * SNMP Community Names are c ase-sensitive. The Total Access 1248 system provides two SN MP Community Name accounts with the following default s: • Name: private • IP Address: 0.0.0.0 • P rivileges: Read/Write • Name: public •[...]

61179641AL1-5 C 5-1 Section 5 User Interface INTRODUCTION This section provid es detailed information on the following: • “System Management” on page 5-1 • “Logging on to the Total Access 1248” on page 5-3 • “Menu Structure” on page 5-4 • “Menu Navigation” on page 5-5 • “Menu Tree” on page 5-9 • “Menu Descriptions?[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-2 61179641AL1-5C Most personal computers or laptops can run co mm unications software that emulates a V T100 terminal. Windows programs such as Terminal or HyperTerminal are two such examples in the Windows format, but there are many other adequate, com[...]

Logging on to the Total Access 1248 61179641AL1-5 C 5-3 LOGGING ON TO THE T OTAL ACCESS 1248 To logon to the Total Acces s 1248 sy stem, perform the following steps: 1. Establish the physical connection to the Total Access 1248. 2. If a craft port session is being used, proceed to step 3 . If using a Telnet session proceed to step 4 . 3. Press C TR[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-4 61179641AL1-5C MENU STR UCTUR E The menu structure for the Total Access 1248 is a layered menu tree. Each layer of the menu tree is displayed as a menu or a screen. Menu A menu is a display that provides numbered selections that are used to navigate t[...]

Menu Navigation 61179641AL1-5 C 5-5 MENU NAVIGA TION Basic menu navigation is a ccomplished by se lecting the desired option number and then pressing E NTER . To return to the previous menu, press the E SC (escape) key. To access the System Help screen, press the question mark ( ? ) key, and press E NTER . Hot K eys Table 5-1 shows the general keyb[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-6 61179641AL1-5C P This hot key is used to display the previous port. N This hot key is used to display the next port. S This hot key is used to select a specific port. Auto Upgrade Config uration (AUC) Status C This hot key clears all the status info r[...]

Menu Navigation 61179641AL1-5 C 5-7 IMA Performance Monitoring St atus (Facilities) B This hot key is used to display performa nce monitoring statisti cs for the last 2 hours, in 15 minute intervals. C This hot key is used to clear the performance monitoring statistics. F This hot key is used to display performa nce monitoring statis tics for the n[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-8 61179641AL1-5C S This hot key is used to select a specific port. Performanc e Monitoring St atus B This hot key is used to display performa nce monitoring statisti cs for the last 2 hours, in 15 minute intervals. C This hot key is used to clear the pe[...]

Menu Tree 61179641AL1-5 C 5-9 * After creating a profile, provisioning is not updated until the profile changes fro m Inactive to Active. To unassign ports on a profile, simply change the state to Inactive and change the ports to “0” and this remove s them. MENU T R EE There are a number of me nu scr eens designed to aid in the maintenance and [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-10 61179641AL1-5C Figure 5-3. Total Access 1248 Main Menu Tree 1. Configuration Unit Name CLEI Code Part Number Product Revision Serial Number Software Revision 2. A TM Circuit Management 1. A TM PVC/PVP Management 2. A TM Traffic Parameter Defaults 3. [...]

Menu Tree 61179641AL1-5 C 5-11 Figure 5-4. System Management Menu Tree 1. Set Passwords 2. Allow SNMP Security Management 3. Set Menus Idle Logout T ime 5. Set TL1 Inband Idle Logout T ime 4. Set TL1 Menus Idle Logout T ime 6. Restore Default Passwords 1. IP Address 2. Ping T imeout 3. Number of Pings 4. Start Ping IP Feed 2. Mode 3. Configure IP 1[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-12 61179641AL1-5C Figure 5-4. System Management Menu Tree (Continued ) B 13. Expansion Menu 12. External Alarms 1. Mode 2. Clear Packet Counts System Uptime 2. Alarm #2 1. Alarm #1 3. Alarm #3 4. Severity 5. Severity 6. Severity 7. Fan Alarm Delay 1. En[...]

Menu Tree 61179641AL1-5 C 5-13 Figure 5-5. Network Port Menu Tree 1. T1/E1 Provisioning 2. T1/E1 Status 3. T1/E1 Performance 1. IMA Configuration 2. Framing (T1/E1) 3. Line Code (T1/E1) 1. IMA Group PM 2. Facilities PM 3. Clear All IMA Links PM IMA Firmware Revision IMA Link T ype 2. IMA 1. Enable 2. Disable 2. Provisioning 3. Status/Failure Monito[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-14 61179641AL1-5C Figure 5-6. DSL Menu Tree 1. ADSL Provisioning 2. ADSL Status 3. ADSL Performance 1. Display PM for Current Port 2. Clear All PM for All Ports 1. ADSL Status 2. All ADSL Ports Status 3. A TU-R Information 4. BA T/SNR T ables 1. DSL Pro[...]

Menu Descriptions 61179641AL1-5 C 5-15 MENU DESCRIPTIONS Main Menu Main Menu The Total Access 1248 Main menu (see Figure 5-7 ) is the access point to all other operations. The Main menu options have several function s and submenus that identify and provide access to specific operations and parameters. Figure 5-7. Total Access 1248 Main Menu The To[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-16 61179641AL1-5C 7 System Event Log This option displays the “System Event Log Screen” on page 5-172. 8 Contact Information This option displays the “Contact Inform ation Screen” on page 5-174. 9 Enter TL1 Mode This option displays the “TL1 M[...]

Menu Descriptions 61179641AL1-5 C 5-17 Configur a tion Screen Configuration Main Menu Configuration The Configuration screen (s ee Figure 5-8 ) displays information about the system. For instance, the CLEI Code and Part Number can be used to search for related information on the ADTRAN web site or to o rder additional parts. Th e software re visi[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-18 61179641AL1-5C A TM Circuit Mana gement Menu ATM Circuit Management Main Menu A TM Circuit Management The ATM Circuit Management menu (see Figure 5-9 ) contains the steps used to provision and maintain customer circuits. From this menu, a Per manen[...]

Menu Descriptions 61179641AL1-5 C 5-19 PV C/PVP Managem ent Menu PVC/PVP Management Main Menu A TM Circuit Management PVC/P VP Management NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select Shelf menu (s ee Figure 5-10 ) displays. A host or client unit must be chosen in order to access the PVC/PVP Managem[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-20 61179641AL1-5C Figure 5-11. PVC/PVP Management Menu The PVC/PVP Management hot keys are defined in Table 5-9 . T able 5-6. PVC/PVP Management Hot Keys Hot Key Description Fun ction C Create a new PVC /PVP This hot key displays the “Create a New PVC[...]

Menu Descriptions 61179641AL1-5 C 5-21 Create a New PV C/PVP Scr een Create New PVC/PVP Main Menu A TM Circuit Management PV C/PVP Management Create New PVC/PVP The Create a New PVC/PVP screen (see Figure 5-12 ) is used to create the PVC/PVPs for ADSL connections. Each ADSL connection has at leas t one PVC/ PVP per ATM circuit pr ovisioned fo[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-22 61179641AL1-5C Service This field ide ntifies ATM Traffic Class. There ar e four service options (Traffic Descriptors) available for the Total Acce ss 1248 system: •U B R •C B R •V B R - r t •V B R - n r t The options available for each ser v[...]

Menu Descriptions 61179641AL1-5 C 5-23 Delete an Existing PV C/PVP Scre en Delete Existing PVC/P VP Main Menu A TM Circuit Management PV C/PVP Management Delete Existing PVC/PVP When the D hot key is selecte d to delete a PVC/PVP, a confir mation prompt at the bottom of the screen (see Figure 5-13 ) displays. Figure 5-13. Delete an Existing PV[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-24 61179641AL1-5C Modify an Existing PV C/PVP Screen Modify Existing PVC/PVP Main Menu A TM Circuit Management PV C/PVP Management Modify Existing PVC/PVP The Modify an Existing PVC/PVP screen (see Figure 5-14 ) is used to modify existing PVC/ PVP[...]

Menu Descriptions 61179641AL1-5 C 5-25 Service This field identifies ATM Traffic Class. There are four service options (Traffic Descriptors) ava ilable for the Total Access 1248 system: •U B R •C B R •V B R - r t •V B R - n r t The options available for each se rvice a nd their descriptions are shown in Table 5-10 . Circuit ID This field di[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-26 61179641AL1-5C Cur rent A TM O AM Statistics Menu Current A TM OAM Statist ics Main Menu A TM Circuit Management PV C/PVP Management Current A TM OAM Statistics The Current ATM Operations and Main tenance (OAM) Statistic s menu (see Figure 5-15[...]

Menu Descriptions 61179641AL1-5 C 5-27 The Current ATM OAM S tatistics menu fields are sho wn in Table 5-12 . T able 5-12. Cur rent A TM O AM Statistics Menu Fields Field Description Endpoint 1 Rx OAM Cells This field displays the total nu mber of received OAM cells for Endpoint 1. AIS State This field indicates if the Endpoint is in AIS state (Tru[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-28 61179641AL1-5C OAM Loopback Test Menu OAM Loopback Test Main Menu A TM Circuit Management PV C/PVP Management Current A TM OAM Statistics OAM Loopback T est The OAM Loopback Test menu (see Figure 5-16 ) displays the network and line side info[...]

Menu Descriptions 61179641AL1-5 C 5-29 The OAM Loopback Test menu fields are shown in Table 5-14 . 4 Send from Endpoint 1 to Network This option is used to initia te a loopback from Endpoint 1 to the network. 5 Send from Endpoint 2 to Customer This option is used to initia te a loopback from Endpoint 2 to the customer. 6 Reset Loopback Statistics T[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-30 61179641AL1-5C Tx Loopback Response This field displays the total num ber of transmitted loopback response s. Rx Loopback Response This field displays the total number of received loopback response s. Loopback Passed This field displays the total nu [...]

Menu Descriptions 61179641AL1-5 C 5-31 Cur rent A TM PV C Perfor mance Menu Current ATM PVC Performance Main Menu A TM Circuit Management PV C/PVP Management Current A T M PVC Performance The Current ATM PVC Performance menu (see Figure 5-17 ) displays the network and port side information for each ATM circuit. Figure 5-17. Current ATM PVC Pe[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-32 61179641AL1-5C The Current ATM PVC Performance menu fields are shown in Table 5-16 . T able 5-16. Cur rent A TM P or t P erfor mance Menu Fields Field Description Endpoint 1 (Net --> Cust) Tx Cells This field displays the total number of transmit [...]

Menu Descriptions 61179641AL1-5 C 5-33 A TM Quick Pro v isioning Menu ATM Quick Provisioning Main Menu A TM Circuit Management PV C/PVP Management A TM Quick Provisioning The ATM Quick Provisioning menu (see Figure 5-18 ) is used to quickly create ATM circuits based on referenc e circuits. Figure 5-18. ATM Quick Provisioning Menu The ATM Quic[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-34 61179641AL1-5C Figure 5-19 shows the ATM PVC/PVP Managem ent me nu after creating new ATM circuits using the ATM Quick Provisioning menu with the settings shown in Figure 5-18 . Figure 5-19. ATM PVC/PVP Management Menu with 48 PVCs Page 1 of 5 PVC/PV[...]

Menu Descriptions 61179641AL1-5 C 5-35 A TM Traf fic Parameter Defaults Scr een ATM Traffic Parameter Defaults Main Menu A TM Circuit Management A TM T raffic Parameter Defaults The ATM Traffic Parameter Defaults screen (see Figure 5-20 ) displays th e system defaults for the ATM circuits. Traffic parameters represent priorities given to ATM cel[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-36 61179641AL1-5C R estore A TM F actor y Defaults Menu Restore ATM Factory Defaults Main Menu A TM Circuit Management Restore A TM Factory Defaults The Total Access 1248 prov isioning system provides the abilit y to restore the ATM parameters to th[...]

Menu Descriptions 61179641AL1-5 C 5-37 T able 5-19. Restore A TM F actor y Defaults Menu Options Option Description Fun ction 1 Delete All PVCs and Restore Default Settings This option deletes all PV Cs and restores ATM factory defaults without additional prompting. 2 Delete Host PVCs This option deletes Host PVCs without addition al prompting. 3 D[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-38 61179641AL1-5C A TM Perf or mance Monitoring Mod e Menu ATM Performance Monitoring Mode Main Menu A TM Circuit Management A TM Performance Monitoring Mode NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select[...]

Menu Descriptions 61179641AL1-5 C 5-39 Figure 5-23. ATM Performance Monitoring Mode Menu The ATM Performance Mo nitoring Mode menu opt ions are shown in Table 5-20 . T able 5-20. A TM Perf or mance Mon itoring Mode Menu Options Option Description Function 1 Change ATM Port Number Th is option is used to change the ATM po rt number without additiona[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-40 61179641AL1-5C A TM Performan ce Monitoring Status Screen ATM Performance Monitoring Status Main Menu A TM Circuit Management A TM Performance Monitoring Mode A TM Perf ormance Monitoring Status The ATM Performance Monitoring Status screen (see[...]

Menu Descriptions 61179641AL1-5 C 5-41 T able 5-22. A TM Perf or mance Monitoring Status Hot K eys Hot Key Description Fun ction B Backward (2hrs/15min PM) This hot key is used to di splay performance monitoring statistics for the last 2 hour s, in 15 minute intervals. C Clear PM Status This hot key is used to clea r the perf ormance monitor ing st[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-42 61179641AL1-5C A TM Por t Cell Count Summar y Scr een ATM Port Cell Count Summary Main Menu A TM Circuit Management A TM Performance Monitoring Mode A TM Por t Cell Count Summary The ATM Port Cell Count Summary screen (see Figure 5- 25 ) displa[...]

Menu Descriptions 61179641AL1-5 C 5-43 Clear All PM for All P or ts Menu Clear All PM for All Ports Main Menu A TM Circuit Management A TM Performance Monitoring Mode Clear All PM for All Ports The Clear All PM for All Ports option is selected from the ATM Performance Mo nitoring Mode Menu . The Clear All PM for All Port s menu options are sh[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-44 61179641AL1-5C A TM OAM Settings Menu ATM OAM Setti ngs Main Menu A TM Circuit Management A TM OAM Settings The ATM OAM Settings menu (see Fig ure 5-26 ) is used to provision the Total Access 1248 OAM settings and to test the Inband channel PVC f[...]

Menu Descriptions 61179641AL1-5 C 5-45 Inband O AM Loopback T est Menu Inband OAM Loopback Test Main Menu A TM Circuit Management AT M O A M S e t t i n g s Inband OAM Loopback T est The Inband OAM Loopback Test menu (see Figure 5-27 ) is used to provision the Total Access 1248 OAM Loopback settings and to test the Inband chann el PVC for an [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-46 61179641AL1-5C The Inband OAM Loopback Test menu fields are shown in Table 5-27 . T able 5 -27. Inband O AM Lo opback T est Menu Fields Field Description Port This field displays the physical port. VPI This field displays the VPI for the circuit. VCI[...]

Menu Descriptions 61179641AL1-5 C 5-47 System Management Menu System Management Main Menu System Management The System Management menu (see Figure 5-28 ) is used to manage system settings. The following subsections descr ibe these settings in detail. Figure 5-28. System Management Menu The System Management menu options are shown in Table 5-28 . [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-48 61179641AL1-5C 7 SNMP/TL1 This option displays the “SNMP/TL1 Configuration Menu” on page 5-71. 8 Download New Code This option displays the “Code Download Method Menu” on page 5-77. 9 Restore Factory Def aults This opti on displays the “ Re[...]

Menu Descriptions 61179641AL1-5 C 5-49 Pass wor d Contr ol Menu Password Control Main Menu System Management Password Control The Password Control menu (see Figur e 5-29 ) is used to set and mo dify passwords, logout times, and restore default passwords. The system provides up to eleven user accounts. Figure 5-29. Password Control Menu The Pass[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-50 61179641AL1-5C Pass word Control Lev els Scre en Password Control Levels Main Menu System Management Password Control Password Control Levels The Password Control Levels screen (see Figure 5-30 ) is used to manage the usernames and associated p[...]

Menu Descriptions 61179641AL1-5 C 5-51 5. Enter the password again when prompted to verify, and press E NTER . 6. Press the T AB key to navigate to the Access Level field. The Access Level field displays in reverse video. 7. Press the s pacebar to change the acces s level, and press E NTER . 8. Press the T AB key to navigate to the Status field. Th[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-52 61179641AL1-5C Mode Selection and Cur rent IP Se ttings Menu Mode Selection and Current IP Settings Main Menu System Management Mode Selection and Cu rrent IP Settings To remotely manage the Total Ac cess 1248 system , the IP settings must be con[...]

Menu Descriptions 61179641AL1-5 C 5-53 NO TE The Media Access Control (MAC) ad dress, which is set at the factory, is required to configure the DHCP server. T able 5-31. Mod e Selection and Cur rent IP Settings Menu Items Option Descrip tion Function 1 IP Feed This option provides 3 choices for the selection of IP Feed type: • RFC1483 Routed Enca[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-54 61179641AL1-5C Static IP Settings - for IP over ATM Menu Static IP Settings - for IP over ATM Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over A TM The Static IP Settin gs - for IP over ATM men[...]

Menu Descriptions 61179641AL1-5 C 5-55 NO TE The Media Access Control (MAC) a ddress is set at the factory. 5 Default Gateway This option is used to configure the Default Gateway. The Default Gateway is used to forward traffic to a destination outside of the subnet of the Total Access 1248. The Default Gateway is configured in decimal dot format. 6[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-56 61179641AL1-5C Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over A TM Restore IP Factory Defaults The Restore IP Factory Defaults [...]

Menu Descriptions 61179641AL1-5 C 5-57 Dynamic IP Settings - for IP over ATM Menu Dynamic IP Settings - for IP over ATM Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over A TM The Dynamic IP Settings - for IP over ATM menu (see Figure 5-34 ) is used to provision some of the IP settings. When t[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-58 61179641AL1-5C NO TE The Media Access Control (MAC) a ddress is set at the factory. T able 5-34 . Dynamic IP Settings - f or IP o v er A TM Menu Items Option Description Function N/A IP address This option cannot be chan ged. The IP address is automa[...]

Menu Descriptions 61179641AL1-5 C 5-59 Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Set tings Dynamic IP Settings - for IP over A TM Restore IP Factory Defaults The Restore IP Factory Defaults menu (see Figure 5-35 ) is used to reset all of the IP factory defaults. CA[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-60 61179641AL1-5C Static IP Settings - for IP over Ethernet Menu Static IP Settings - for IP over Ethernet Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over Ethernet The Static IP Settin gs - for I[...]

Menu Descriptions 61179641AL1-5 C 5-61 NO TE The Media Access Control (MAC) a ddress is set at the factory. T able 5 -36. Sta tic IP Settings - for IP o ver Ether net Menu Options Option Description Function 1 IP address This option is us ed to configure the IP address in decimal dot format (i.e., ###.###.###.###). 2 Subnet mask This option is used[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-62 61179641AL1-5C Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over Ethernet Restore IP Factory Defaults The Restore IP Factory Defau[...]

Menu Descriptions 61179641AL1-5 C 5-63 Dynamic IP Settings - for IP over Ethernet Menu Dynamic IP Settings - for IP over Ethernet Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over Ethernet The Dynamic IP Settings - for IP over Ethernet menu (see Figure 5-38 ) is used to provision some of the [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-64 61179641AL1-5C NO TE The Media Access Control (MAC) a ddress is set at the factory. T able 5-38. Dyna mic IP Settings - for IP o ver Ether net Menu Items Option Description Function N/A IP address This option cannot be chan ged. The IP address is aut[...]

Menu Descriptions 61179641AL1-5 C 5-65 Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over Ethernet Restore IP Factory Defaults The Restore IP Factory Defaults menu (see Figure 5-39 ) is used to reset all of the IP factory defaults[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-66 61179641AL1-5C T est IP Addr ess Menu Tes t IP Address Main Menu System Management T est IP Address Ping and Traceroute utilities are includ ed on the Test IP Address menu (see Figure 5-40 ) for testing the IP configurations. Figure 5-40. Test IP[...]

Menu Descriptions 61179641AL1-5 C 5-67 Time/Da te Adjust Menu Time/Date Adjust Main Menu System Management Time/Date Adjust The Time/Date Adjust menu (see Figure 5-41 ) is used to set the system time and date. The time and date appear on most scre ens and is used for performance monitoring disp lays. Figure 5-41. Time/Date Adjust Menu The Time/[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-68 61179641AL1-5C Cur r ent Baud Rate Menu Current Baud Rate Main Menu System Management Current Baud Rate The Current Baud Rate menu (see Figure 5-42 ) displays the current baud rate. T he default management port bau d rate is 9600 bps. Figure 5-42[...]

Menu Descriptions 61179641AL1-5 C 5-69 TFTP Configur ation Storag e/R etrie val Scr een TFTP Configuration Storage/Retrieval Main Menu System Management TF TP Configuration Storage/Retrieval The TFTP Configur ation St orage/Retrieval screen (see Figure 5-43 ) is used to save provi- sioning information for the Total Access 1248 sy stem to a remo[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-70 61179641AL1-5C NO TE For alternate methods to store or retrieve the Total Access 1248 System Configuration Archive (SCA) file see “SNMP/TFTP and TL1 Configuration Storage and Retrieval” on page 6-2. T able 5-43. TFTP Configur ation Stora ge/R etr[...]

Menu Descriptions 61179641AL1-5 C 5-71 SNMP/TL1 Configur ation Menu SNMP/TL1 Configuration Main Menu System Management SNMP/TL1 Configuration The Simple Network Management Protocol (SNMP)/TL1 Configuration menu (see Figure 5-44 ) is used to provision contact in formation, community names, trap hosts, and the traps enabled option, which provide [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-72 61179641AL1-5C SNMP Contact Infor mation Men u SNMP Contact Informa tion Main Menu System Management SNMP/TL1 Configuration SNMP Contact Information The SNMP Contact Information menu (see Figure 5-45 ) contains contact information and can be cu[...]

Menu Descriptions 61179641AL1-5 C 5-73 SNMP Community Names Men u SNMP Community Name s Main Menu System Management SNMP/TL1 Configuration SNMP Community Names The SNMP Community Names menu (see Figure 5-46 ) is used to establish up to three named accounts which specify unique IP addresses and privileges for network management. To restrict SN[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-74 61179641AL1-5C 5 IP Address This option is used to configure the second SNMP community IP addres s in decimal dot fo rmat (i.e., ###.###.###.###). 6 Privileges This option is used to configure the second SNMP community privilege level. Options includ[...]

Menu Descriptions 61179641AL1-5 C 5-75 SNMP T ra p Hosts Menu SNMP Trap Hosts Main Menu System Management SNMP/TL1 Configuration SNMP T rap Hosts The SNMP Trap Hosts Menu (see Figure 5-47 ) is used to set multiple IP Addresses (trap desti- nations) and SNMP versions for notification of a tr ap. A trap is an au tomatic alert, or notifi- cation[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-76 61179641AL1-5C NO TE The SNMP version should match th e agent used for SNMP on the network management side. 4 Version T h i s o p t i o n i s u s e d t o c o n f igure the SNMP version for the second SNMP trap host. Op tions include the following: ?[...]

Menu Descriptions 61179641AL1-5 C 5-77 Code Download Method Menu Code Download Method Main Menu System Management Code Download Method The Code Download Method menu displa ys two methods to download code (see Figure 5-48 ). Figure 5-48. Code Download Method Menu The Code Download Method menu options are shown in Table 5-48 . CA UTION Downloadin[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-78 61179641AL1-5C NO TE The System Management menu TFTP IP addr ess option must be configured to use TFTP. Y -Modem Menu Y-Modem Main Menu System Management Code Download Method Y -Modem The Y-Modem menu (see Figure 5- 49 ) is used to download cod[...]

Menu Descriptions 61179641AL1-5 C 5-79 4. Browse to the file containing the code, select Ymodem for the drop-down menu, and select S END . NO TE The code begins transmitting from the terminal emulation package. When the download is complete, the unit restarts au tomatically. NO TE If the download is cancelle d due to inactivity, press E SC to retur[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-80 61179641AL1-5C T able 5-49 . TFTP Download Screen Fields Field Description TFTP Server This field displays the IP address of the TFTP server. The TFT P IP address must be configured prior to attemp ting a TFTP download. Get Code For This field displa[...]

Menu Descriptions 61179641AL1-5 C 5-81 A uto Upgr ade Configuration (A UC) Status Men u Auto Upgrade Configuration (AUC) Sta t us Main Menu System Management Code Download Method Auto Upgrade Configuration (AUC) St atus The Auto Upgrad e Configurat ion (AUC) Status menu (see Figure 5-51 ) provides methods to manually or automatica lly upgrade[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-82 61179641AL1-5C NO TE Auto Upgrade operations will not be initiated if the AUC Refresh Interval option is set to zero, the AUC Config File option is empty , the configuration file cannot be retrieved from the AUC TFTP Server, or the configuratio n fil[...]

Menu Descriptions 61179641AL1-5 C 5-83 Separate status information is provided for the file retrieval operation and the actual upgrade operation. The Auto Upgrade Co nf iguration (AUC) Status menu st atus fields are defined in Table 5-51 . The three hot keys associated with the Auto Upgrade Configuration (A UC) Status menu are defined in Table 5-5 [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-84 61179641AL1-5C R estore F actor y Defaults Menu Restore Factory Defaults Main Menu System Management Restore Factory Defaults The Restore Factory Defaults menu (see Figure 5- 52 ) is used to remotely restore the system to factory defaults. CA UTI[...]

Menu Descriptions 61179641AL1-5 C 5-85 R eset System Menu Reset Sy stem Main Menu System Management Reset System The Reset System menu (see Figure 5-53 ) is used t o reboot th e entire sy stem. CA UTION This action is service affecting. If the system is acce ssed remotely through a static IP address, the system resets and access is lost until t[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-86 61179641AL1-5C Self T est Menu Self Test Main Menu System Management Self T est NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select Shelf menu (s ee Figure 5-54 ) displays. A host or client unit must be cho[...]

Menu Descriptions 61179641AL1-5 C 5-87 Figure 5-55. Self Test Menu The Self Test menu option is shown in Table 5-55 . T able 5-55. Self T est Menu Option Option Description Function 1 Run Fan Self Test This option initiates the Total Access 1248 fa n self test. TID: TA1248 Total Access 1 248 MM/DD /YY HH:MM Unacknowledged A larms: None Shelf = Host[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-88 61179641AL1-5C Exter na l Alar ms Menu External Alarms Main Menu System Management External Alarms The External Alarms menu (see Figure 5-56 ) is used to customize the profiles for up to three external alarms. The alarms can be assigned unique na[...]

Menu Descriptions 61179641AL1-5 C 5-89 Exter nal Alar m Sev erity Menu External Alarm Severity Main Menu System Management External Alarms External Alarm Severity The External Alarm Severity menu (see Figure 5-57 ) is used to set customized alarm profiles for each of the three exter nal alarms. Figure 5-57. External Alarm Severity Menu The Ex[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-90 61179641AL1-5C Expansion Menu Expansion Main Menu System Management Expansion The Expansion Menu (see Figure 5-58 ) is used to enable or disa ble expansion capabilities for up to four Total Access 1248 un its (one host and three clients) . The ex[...]

Menu Descriptions 61179641AL1-5 C 5-91 Modem Configura tion Menu Modem Configuration Main Menu System Management Modem Configuration The Modem Configuration menu (see Figure 5-59 ) is used to provision the modem options. The V.90 modem is used for remote oper ation. Figure 5-59. Modem Co nfiguration Menu The Modem Configuration menu options are[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-92 61179641AL1-5C Caller ID Fea tures Menu Caller ID Features Main Menu System Management Modem Configuration Caller ID Features The Caller ID Features menu (see Figur e 5-60 ) is used to provision the caller ID options. Figure 5-60. Caller ID Fea[...]

Menu Descriptions 61179641AL1-5 C 5-93 Netw or k Por t Menu Network Port Main Menu Network Port The Network Port menu (see Figure 5-61 ) is used to view T1 or E1 circuits, configure the IMA Group, and access the T1 or E1 interfaces. Figure 5-61. Network Port Menu NO TE The proper mode should be selected prior to configuring a T1 or E1 circuit. Th[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-94 61179641AL1-5C T1 Main Menu T1 Main Menu Main Menu Network P ort T1 Main Menu From the T1 Main Menu (see Figure 5-62 ), all T1 provisioning, st atus reporting and perfor- mance monitoring can be viewed. Figure 5-62. T1 Main Menu The T1 Main Menu [...]

Menu Descriptions 61179641AL1-5 C 5-95 T able 5 -63. T1 Main Menu Options Option Description Function 1 T1 Provisioning This option d isplays the “T1 Provisioning Menu” on page 5-96. 2 T1 Status This option displays the “T1 Status Menu” on page 5-98. 3 T1 Performance This option displays the “T1 PM Main Menu” on page 5- 100. 4 Test This[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-96 61179641AL1-5C T1 Pro visioning Menu T1 Provisioning Main Menu Network P ort T1 Main Menu T1 Provisioning The T1 Provisioning scree n (see Figure 5-63 ) displays the current T1 settings. Figure 5-63. T1 Provisioning Menu The T1 Provisioning men[...]

Menu Descriptions 61179641AL1-5 C 5-97 T able 5-64. T1 Pr o visioning Menu Options Option Description T1 Functio n 1 Type This field displays the T1 circuit type. 2 Framing This field displays the framing setting for the T1 circuit. Settings include the following: •S F •E S F 3 Line Code This field displays the line code setting for the T1 circ[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-98 61179641AL1-5C T1 Status Men u T1 Status Main Menu Network P ort T1 Main Menu T1 Status The T1 Status menu (see Figure 5-64 ) displays the statu s of the T1 network circuits an d a summary of the associated alarm counts. Figure 5-64. T1 Status [...]

Menu Descriptions 61179641AL1-5 C 5-99 T able 5-6 5. T1 Status Menu Options Option Field Function N/A Type This field displays the T1 circuit type. N/A Framing This field displays the framing setting for the T1 circuit. For more information, see Table 5-64 on page 5-97. N/A Line Code This field displays the line code setting for the T1 circuit. For[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-100 61179641AL1-5C T1 PM Main Menu T1 PM Main Menu Network P ort T1 Main Menu T1 PM The T1 PM Main Menu (see Figure 5-65 ) is used to access the T1 performance monitoring displays in 24-hour and 15-minute increments for the current port selected a[...]

Menu Descriptions 61179641AL1-5 C 5-101 T1 Performance Monitoring Status Screen T1 Performance Monitorin g Status Main Menu Network P ort T1 Main Menu T1 PM T1 Performance Monitoring Status The T1 Performance Monitori ng Status scree n (see Figure 5-66 ) displays performance monitoring in 24-hour and 15-minute incr ements for the current po[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-102 61179641AL1-5C The T1 Performance Monitoring Status screen hot keys are defined in Table 5-68 . CV-P Code Viola tions This code indicates an occurrence of either a CRC-6 error or frame bit erro r on the path. CV-L Code Viola tions This code indicate[...]

Menu Descriptions 61179641AL1-5 C 5-103 T1 T est Menu T1 Test Main Menu Network P ort T1 Main Menu T1 T est Figure 5-67 shows the T1 Test Menu. Figure 5-67. T1 Test Menu The T1 Test Menu options are shown in Table 5-69 . T able 5-69. T1 T est Menu Options Option Definition Function 1 Payload Loopback This option is used to sele ct a payload l[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-104 61179641AL1-5C R estore T1 Factor y Defaults Menu Restore T1 Factory Defaults Main Menu Network P ort T1 Main Menu Restore T1 Factory Defaults The Restore T1 Factory Defaults menu (see Figure 5-68 ) provides the option to restore the line sett[...]

Menu Descriptions 61179641AL1-5 C 5-105 E1 Main Menu E1 Main Menu Main Menu Network P ort E1 Main Menu From the E1 Main Menu (see Figure 5-69 ), all E1 provisioning, st atus reporting and perfor- mance monitoring can be viewed. Figure 5-69. E1 Main Menu The E1 Main Menu options are shown in Table 5-71 . T able 5 -71. E1 Main Menu Options Option[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-106 61179641AL1-5C E1 Pro visioning Menu E1 Provisioning Main Menu Network P ort E1 Main Menu E1 Provisioning The E1 Provisioning screen (see Figure 5-70 ) displays th e current E1 settings. Figure 5-70. E1 Provisioning Menu The E1 Provisioning me[...]

Menu Descriptions 61179641AL1-5 C 5-107 E1 Status Men u E1 Status Main Menu Network P ort E1 Main Menu E1 Status The E1 Status Menu (see Figur e 5-71 ) displays the status of the E1 network circuits and a summary of the associated alarm counts. Figure 5-71. E1 Status Menu The E1 Status menu options are shown in Table 5-73 . T able 5-73. E1 St[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-108 61179641AL1-5C E1 PM Main Menu E1 PM Main Menu Main Menu Network P ort E1 Main Menu E1 PM Main Menu The E1 PM Main Menu (see Figure 5-72 ) is used to access the E1 performance monitoring displays in 24-hour and 15-minute increme nts fo r the c[...]

Menu Descriptions 61179641AL1-5 C 5-109 E1 Perf or mance Monitoring Status Scr een E1 Performance Monitoring Status Main Menu Network P ort E1 Main Menu E1 PM Main Menu E1 Performance Monitorin g Status The E1 Performance Monitoring Status screen (see Figure 5-73 ) displays performance monitoring in 24-hour and 15-minute incr ements for the[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-110 61179641AL1-5C The E1 Performance Monitoring Status screen hot keys are defined in Table 5-76 . CV-P Code Viola tions This code indicates an occurrence of either a CRC-6 error or frame bit erro r on the path. CV-L Code Viola tions This code indicate[...]

Menu Descriptions 61179641AL1-5 C 5-111 E1 T est Menu E1 Test Main Menu Network P ort E1 Main Menu E1 T est Figure 5-74 shows the E1 Test Menu. Figure 5-74. E1 Test Menu The E1 Test Menu options are shown in Table 5-77 . T able 5-77. E1 T est Menu Options Option Definition Function 1 Payload Loopback This option is used to sele ct a payload l[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-112 61179641AL1-5C R estore E1 Factor y Defaults Menu Restore E1 Factory Defaults Main Menu Network P ort E1 Main Menu Restore E1 Factory Defaults The Restore E1 Factory Defaults menu (see Figure 5-75 ) provides the option to restore the line sett[...]

Menu Descriptions 61179641AL1-5 C 5-113 IMA Main Menu IMA Main Menu Main Menu Network P ort IMA Main Menu The Total Access 1248 system is fed by virtual circuits using IMA. The IM A Main menu (see Figure 5-76 ) is the central point for managing and provisioning the Total Access 1248 IMA related option s. Figure 5-76. IMA Main Menu The IMA Main [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-114 61179641AL1-5C IMA Configuration Screen IMA Configuration Screen Main Menu Network P ort IMA Main Menu IMA Configuration Screen The IMA Configuration screen (see Figure 5-77 ) displays the IMA F irmware Revision and IMA Link type. This screen [...]

Menu Descriptions 61179641AL1-5 C 5-115 IMA Pro visioning Menu IMA Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning The IMA Provisioning menu (see Figure 5-78 ) is used to provision and maintain IMA functions. Figure 5-78. IMA Provisioning Menu The IMA Provisioning menu optio ns are shown in Table 5-80 . T able 5-80. IMA Pr[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-116 61179641AL1-5C IMA Facility Provisioning Menu IMA Facility Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Facility Provisioning The IMA Facility Provisioning menu (see Figure 5-79 ) provides provisioning of the IMA l[...]

Menu Descriptions 61179641AL1-5 C 5-117 IMA All Faciliti es Provisioning Screen IMA All Facilities Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Facility Provisioning IMA All Facilities Provisioning The IMA All Facilities Provisioning screen (see Figure 5-80 ) provides a summary of all the IMA facilities. Figure [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-118 61179641AL1-5C Operation Mode for Facility Menu Operation Mode for Facility Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Facility Provisioning IMA All Facilities Provisioning Operation Mode for Facility The Operation Mode f[...]

Menu Descriptions 61179641AL1-5 C 5-119 IMA Group Provisioning Menu IMA Group Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Group Provisioning The IMA Group Provisio ning menu (see Figure 5-82 ) is used to provisio n the IMA Grou p. An IMA Group is a collection of ph ysical links bundled together. NO TE The IMA Gro[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-120 61179641AL1-5C 2 IMA Transmit ID Each IMA Group has an overall ID transmitted to the other end. The IMA Trans mit ID is different from the Link ID. The IMA Transmit ID sett ings are from 0 to 255. The default is 101. 3 IMA TX Frame Length This field[...]

Menu Descriptions 61179641AL1-5 C 5-121 IMA Shortcut Setup Menu IMA Shor tcut Setup Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Shortcut Setu p The IMA Shortcut Setup menu (see Figure 5-83 ) provides shortcuts to facilitate provisioning all of the IMA links simultaneously. To pr ovision IMA links individually, refer to “IMA[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-122 61179641AL1-5C IMA Scrambler Menu IMA Scrambler Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Scrambler The IMA Scrambler menu (see Figure 5-84 ) is used to enable or disable s crambling. Scram- bling is designed to randomize th[...]

Menu Descriptions 61179641AL1-5 C 5-123 Restore IMA Factory Defaults Me nu Restore IMA Factory Defaults Main Menu Network P ort IMA Main Menu IMA Provisioning Restore IMA Factory Defaults The Restore IMA Factory Defaults m enu (see Figure 5-85 ) is used to reset the IMA provisioning settings to factory defau lts. CA UTION Depending on the s[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-124 61179641AL1-5C Status/Failure Monitoring Menu Status/Failure Monitoring Main Menu Network P ort IMA Main Menu Status/Failure Monitoring The Total Access 1248 system tracks Failure Mo nitoring (FM) for the IMA group and each of the links. The S[...]

Menu Descriptions 61179641AL1-5 C 5-125 IMA Group 1 Failure Monitoring Status Screen IMA Group 1 Failur e Monitoring Status Main Menu Network P ort IMA Main Menu Status/Failure Monitoring IMA Group 1 Failure Monitoring Status The IMA Group 1 Failu re Monitoring Status scre en (see Figure 5-87 ) displays the status of the group state and the[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-126 61179641AL1-5C Active Rx Links This field displays the number of receiving links that are active. FE Failure Data This field di splays th e Far End failure data. FE Frame Length This field displays the Far End frame length. Group Version This field [...]

Menu Descriptions 61179641AL1-5 C 5-127 IMA Link Failure Monitoring Status Screen IMA Link Failure Monitoring Status Main Menu Network P ort IMA Main Menu Status/Failure Monitoring IMA Link Failu re Monitoring Status The IMA Link Failure Monito ring Status screen (see Figure 5-88 ) displays the states for all of the facilities. Figure 5-88.[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-128 61179641AL1-5C Usable Usable This condition indicates that the link is ready to be used and is awaiting the FE to ac tivate its rece iver before sending any ATM layer cells. IMA frames containing only filler cells are being transmitted; but the link[...]

Menu Descriptions 61179641AL1-5 C 5-129 Deleted Not In Group, Deleted This condition indicate s that the link has been removed from the group. This transitional state ensure s that the other end is still not receiving ATM layer cells before it moves to the Unassigned st ate. Fault Unusable, Fault This condition indicates that a fault has been detec[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-130 61179641AL1-5C Usable Usable This condition indicates that the link is ready to be used for receiving ATM layer cells and it is awaiting the FE Tx to be Usable or Active before mo ving into the Active state. The link has been synchronized with the o[...]

Menu Descriptions 61179641AL1-5 C 5-131 IMA Loopback Men u IMA Loopback Main Menu Network P ort IMA Main Menu IMA Loopback The IMA Loopback menu (see Figure 5-89 ) is used to initiate l oopbacks for testing the IMA group. Each IMA Loopback menu option can b e enabled or disabled. Figure 5-89. IMA Loopback Menu The IMA Loopback menu options ar[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-132 61179641AL1-5C IMA P erfor mance Monitoring Menu IMA Performance Monitoring Main Menu Network P ort IMA Main Menu IMA Performance Monito ring The IMA Performance M o nitoring menu (see Fi gure 5-90 ) is used to track the Total Access 1248 syst[...]

Menu Descriptions 61179641AL1-5 C 5-133 IMA Group 1 Performance Monitoring Status Screen IMA Group 1 Perfo rmance Monitoring Status Main Menu Network P ort IMA Main Menu IMA Performance Monito ring IMA Group 1 Performance Mon itoring Status The IMA Group 1 Perf ormance Monitoring Stat us screen displays IMA group performan ce monitoring sta[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-134 61179641AL1-5C The IMA Group 1 Performa nce Monitoring Status screen hot keys are defined in T able 5-9 4. IMA Group 1 Perf or manc e Monitoring Status Screen Hot Keys Hot Key Description Function B Backward (2hrs/15 min PM) This hot key is used to [...]

Menu Descriptions 61179641AL1-5 C 5-135 IMA Performance Monitoring Status Facility 1 Near End PM Data Screen IMA Performance Monitoring Status Facility 1 Nea r End PM Data Main Menu Network Port IMA Main Menu IMA Performance Monitoring IMA Performance Monitoring St atus Facility 1 Near End PM Data The IMA Performance Monitoring Status Facil[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-136 61179641AL1-5C T able 5-96. IMA Perf or ma nce Monitoring Status Hot K eys Hot Key Description Fun ction B Backward (2hrs/15min PM) This hot key is used to di splay performance monitoring statistics for the last 2 hour s, in 15 minute intervals. C C[...]

Menu Descriptions 61179641AL1-5 C 5-137 T1/E1 Menu T1/E1 Menu Main Menu Network P ort T1/E1 Menu The T1/E1 menu (see Figure 5-93 ) is used to specify eith er a T1 or E1 interf ace. Figure 5-93. T1/E1 Menu TID: TA1248 Total Access 1 248 MM/DD /YY HH:MM Unacknowledged A larms: None T 1/E1 T1 1. T 1 2. E 1 Sele ction : '?' - System Help [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-138 61179641AL1-5C DSL Menus DSL Menus Main Menu DSL Menus Each of the 48 DSL lines has a number of setti ngs that can be provisioned. These settings affect the performance of the line. The class of service to be provisioned on the line and the type o[...]

Menu Descriptions 61179641AL1-5 C 5-139 DSL Provisioning Menu DSL Provisioning Main Menu DSL Menus DSL Provisioning The DSL Provisioning menu (see Figure 5-95 ) provides opt ions to provision th e DSL profiles and restore the ADSL provisioning information . Figure 5-95. DSL Provisioning Menu The DSL Provisioning menu options are as shown in Tab[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-140 61179641AL1-5C ADSL Profiles Menu ADSL Profiles Main Menu DSL Menus DSL Provisioning ADSL Profiles The ADSL Profiles menu (see Figure 5-96 ) is used to apply a set of values to several objects at the same time. At initial setup, all lines are [...]

Menu Descriptions 61179641AL1-5 C 5-141 Figure 5-97 displays an example of the Edit ADSL Prof iles menu. See Table 5-100 on page 5- 141 for details on ADSL line options. NO TE The Custom Na me reference indicates the user assigned profile name. Figure 5-97. Edit ADSL Profile Menu The Edit ADSL Profile menu options are shown in Table 5-100 . T able [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-142 61179641AL1-5C 5 Client 3 This option is used to assign a port to a profile for the third client unit, if enabled. 1-48 None 6 Rate Mode This option is used to select the rate mo de. • Fixed rate provides a fixed transmission speed. • Rate adapt[...]

Menu Descriptions 61179641AL1-5 C 5-143 Upstream Options 16 Target SNR Margin This option indicates the Target Signal to Noise ratio in dB. 0 dB to 15 dB 6 dB 17 Max SNR Margin This option indicates the Maximum Signal to Noise ratio allowed. 0 dB to 31 dB 9 dB 18 Min SNR Margin This option indicates the Minimum Signal to Noise ratio allowed. 0 dB t[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-144 61179641AL1-5C Alar m Profiles Menu Alarm Profiles Main Menu DSL Menus DSL Provisioning Alarm Profiles Alarm options for the DSL lines ar e completed by setting up prof iles using the Alarm Profiles menu (see Figure 5-98 ). At initial set up a[...]

Menu Descriptions 61179641AL1-5 C 5-145 Figure 5-99. Profile Settings for: Custom Name Menu The Profile Settings for: Custom Name menu options are as shown in Table 5-101 . T able 5-101. Pr ofile Settings for : Custom Name Menu Options Option Description Function 1 State This option is used to assign a state to the profile. 2 Host This option is us[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-146 61179641AL1-5C 8 LOS Secs (Upstream) The Loss of Signa l Seconds (LOS Secs) option is used to configure upst ream traffic. V alid values are 0 t o 900 seconds. This option is disabled by setting the value to zero. 9 ES Secs (Upstream) The Errored Se[...]

Menu Descriptions 61179641AL1-5 C 5-147 P or t Pr o visioning Menu Port Provisioning Main Menu DSL Menus DSL Provisioning Port Provisioning NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select She lf menu (see Figure 5-100 ) displays. A host or client unit must be ch osen in order to access the Port Prov[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-148 61179641AL1-5C Figure 5-101. Port Provisioning Menu The Port Provisioning options are as shown in Table 5-102 . T able 5-10 2. P or t Pr o visioning Menu Options Option Description Functio n 1 Select Port This option is used to desi gnate which port[...]

Menu Descriptions 61179641AL1-5 C 5-149 NO TE Use N for next port or P for previous port to select the port to be provisioned. Service State for ADSL Card Menu Service State for A DSL Card Main Menu DSL Menus DSL Provisioning Port Provisioning Service State for ADSL Card The ADSL Card Service State option on the Port Provisioning Menu displ[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-150 61179641AL1-5C Service Mode for Port: # Menu Service Mode for Port : # Main Menu DSL Menus DSL Provisioning Port Provisioning Service Mode for Port: # The Service Mode option on the Port Provisioning Menu displays the Service Mode for Port: [...]

Menu Descriptions 61179641AL1-5 C 5-151 Cabinet Mode for Port: # Menu Cabinet Mode for Port: # Main Menu DSL Menus DSL Provisioning Port Provisioning Cabinet Mode for Port: # The Cabinet Mode optio n on the Port Provisioning Menu displays the Cabinet Mo de for Port: # menu (see Figur e 5-102 ). The # represents the value displa yed for the [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-152 61179641AL1-5C Link Down Alarm for Port: # Menu Link Down Alarm for Port: # Main Menu DSL Menus DSL Provisioning Port Provisioning Link Down Alarm for Port: # The Link Down Alarm option on the Port Provisioning Menu displays the Link Down Al[...]

Menu Descriptions 61179641AL1-5 C 5-153 ADSL R estore Menu ADSL Restore Menu Main Menu DSL Menus DSL Provisioning ADSL Restore Menu The ADSL Restore menu (see Figure 5-103 ) provides options to rest ore all ADSL provisioning or select the DSP Management menu. Figure 5-103. ADSL Restore Menu The ADSL Re store Menu opt ions are shown in Table 5[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-154 61179641AL1-5C DSP Management Menu DSP Management Menu Main Menu DSL Menus DSL Provisioning ADSL Restore Menu DSP Management Menu NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select She lf menu (see Fi[...]

Menu Descriptions 61179641AL1-5 C 5-155 Figure 5-105. DSP Management Menu The DSP Management menu options are shown in Table 5-110 . T able 5-110. DSP Mana gement Menu Options Option Description Displays 1 Reset All DSPs and reload firmware This option displays the “R eset all DSPs and reload firmware Menu”. Selection of the Reset option from t[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-156 61179641AL1-5C Reset DSP Menu Reset DSP Main Menu DSL Menus DSL Provisioning ADSL Restore Menu DSP Management Menu Reset DSP The Reset DSP Menu (see Figure 5-106 ) selective ly resets individual DSPs. Each DSP operates eight ports as liste[...]

Menu Descriptions 61179641AL1-5 C 5-157 ADSL Retrain Crit eria Menu ADSL Retrain Criteria Main Menu DSL Menus DSL Provisioning ADSL Restore Menu DSP Management Menu ADSL Retrain Criteria The ADSL Retrain Criteria menu (s ee Figure 5-107 ) is used to select the conditions that will force a retrain. A comprehensive count of retr ains incu r[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-158 61179641AL1-5C The ADSL Retrain Criteria menu hot keys are defined in Table 5-113 . 3 Retrain UAS-LNE Selection of this option will force a retrain when the Unavailable Seconds on the Line Near End are exceeded. Option selection toggles between On a[...]

Menu Descriptions 61179641AL1-5 C 5-159 Sta tus Menu Status Main Menu DSL Menus Status NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select She lf menu (see Figure 5-108 ) displays. A host or client unit must be chosen in order to access the Status menu. Figure 5-108. Select Shelf Menu The Status menu (see[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-160 61179641AL1-5C Figure 5-109. Status Menu The Status menu options are as shown in Table 5-114 . T able 5-11 4. Sta tus Menu Options Option Description Function 1 ADSL Status This option displays the “ADSL Status Scre en” on page 5-161. 2 All ADSL[...]

Menu Descriptions 61179641AL1-5 C 5-161 ADSL Status Screen ADSL Status Main Menu DSL Menus Status ADSL Status An example of the report returned from selec ting the ADSL Status option is shown in Figure 5-110 . Figure 5-110. ADSL Status Screen TID: TA1248 Total Access 1 248 MM/DD /YY HH:MM Unacknowledged A larms: None Shelf = Host L ine 17 ADS[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-162 61179641AL1-5C ADSL P or ts Status Scr een ADSL Ports Status Main Menu DSL Menus Status ADSL Ports Status An example of the report re turned from selecti ng the ALL ADSL Ports Status option is shown in Figure 5-111 . Figure 5-111. All ADSL Por[...]

Menu Descriptions 61179641AL1-5 C 5-163 AT U - R I n f o r m a t i o n ATU-R Infor mation Main Menu DSL Menus Status A TU-R Information The ATU-R Information screen (see Figure 5-112 ) provides information for the remote end of the circuit. If the line is trained up in T1.413 mode, the screen shows a Vendor ID for the customer’s modem, and [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-164 61179641AL1-5C Bit Allocation T able - Link Up Scr een Bit Allocation Table - Link Up Sc reen Main Menu DSL Menus Status Bit Allocation T able - Link Up Screen The Bit Allocation Table - Link Up scree n (see Figure 5-113 ) displays the bits tr[...]

Menu Descriptions 61179641AL1-5 C 5-165 Figure 5-114. Alternate View of the Bit Allocation Table Screen Press T to view the SNR Margin Table, as shown in Figure 5-115 . Figure 5-115. Upstream SNR Margin Table Screen TID: TA1248 Total Access 1 248 MM/DD /YY HH:MM Unacknowledged A larms: None Line 17 Bit Allocation Table - Link Up Shelf = Host <- [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-166 61179641AL1-5C P erfor manc e Menu Performance Menu Main Menu DSL Menus Performance Menu NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select She lf menu (see Figure 5-116 ) displays. A host or client unit [...]

Menu Descriptions 61179641AL1-5 C 5-167 Figure 5-117. Performance Menu An example of the ADSL Performance Mo nitoring Status screen is shown in Figure 5-118 . Figure 5-118. Current 15 Minute Performance Screen The Performance Monitoring Status screen fields are as shown in Table 5-115 . TID: TA1248 Total Access 1 248 MM/DD /YY HH:MM Unacknowledged [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-168 61179641AL1-5C The Performance Monitoring Status screen hot keys are defined in Table 5-11 6 . T able 5-115 . P erfor mance Monitoring Status Screen Fields Field Description ES This field displays the Errored Seconds. LOL This field displays the Los[...]

Menu Descriptions 61179641AL1-5 C 5-169 ADSL DEL T Menus ADSL DELT Menus Main Menu DSL Menus ADSL DEL T Menus NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-90), the Select She lf menu (see Figure 5-116 ) displays. A host or client unit must be chosen in order to access the Performance menu. Figure 5-119. Select She[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-170 61179641AL1-5C Figure 5-120. ADSL DELT Menu The ADSL DELT menu options are shown in Table 5-117 . T able 5-117. ADSL DELT Menu Options Option Description Functio n 1 Port This option displays a text entry field to enter the port number on which the [...]

Menu Descriptions 61179641AL1-5 C 5-171 System Alar m Log Scr een System Alarm Log Main Menu System Alarm Log The Total Access 1248 system pr ovides a system alarm log for monitoring a larms. To view the System Alarm Log screen (see Figure 5-121 ), select System Alarms fro m the Main menu, and press E NTER . Figure 5-121. System Alarm Log Screen [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-172 61179641AL1-5C System Ev ent Log Screen System Event Log Main Menu System Event Log The System Event Log screen (see Figure 5-122 ) provides non-volatile storage of system events. Figure 5-122. System Event Log Screen The System Event Log screen h[...]

Menu Descriptions 61179641AL1-5 C 5-173 T able 5-1 19. System Ev ent Log Hot Keys Hot Key Description Func tion A All This hot key is used to display all events. D Date/T ime This hot key is used to display date/t ime events. F First This hot key is used to display the first pa ge of events. G Login This hot key is us ed to display login events. L [...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-174 61179641AL1-5C Contact Inf or mation Screen Contact Information Main Menu Contact Information The Contact Information screen (see Figure 5-123 ) disp lays ADTRAN technical support, repair, and online suppor t contact information. Figure 5-123. Con[...]

Menu Descriptions 61179641AL1-5 C 5-175 TL1 Mode Screen TL1 Mod e Main Menu TL1 Mode Figure 5-124 displays the TL1 session screen. TL1 commands can be executed once the session has been activated with a proper login. All commands end with a semicolon. Type 'menus;' to return to the menu session. Figure 5-124. TL1 Mode Screen Table 5-120[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 5-176 61179641AL1-5C T able 5-120. TL 1 Commands TL1 Commands ACT -PROFILE-ADSL ENT -T1 RT RV -C R S- VC ACT -USER ENT -VCL RT RV -E Q PT AL W-MSG-ADSL GET -SYS-INFO RT RV -H D R AL W-MSG-T1 INH-MSG-ADSL RT RV -I NV-EQ PT AL W-MSG-EQPT INH-MSG-T1 RTRV -I [...]

61179641AL1-5 C 6-1 Section 6 Maintenance INTRODUCTION The Total Access 1248 does not require ro utine maintenance for normal operation. ADTRAN does not recommend that repairs be at tempted in the field. Repair services can be obtained by retu rning the defective unit to ADTRAN. For more troubl eshooting information, refer to the Total Access 1100/[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 6-2 61179641AL1-5C To remove a fan modu le, pe rform the following steps: 1. Loosen the screw that holds the fan module in place. 2. Remove the fan mo dule by pulling it straight out of the chassis. To install a new fan module, perform the following steps[...]

SNMP/TFTP and TL1 Configuration Storage and Retrie val 61179641AL1-5 C 6-3 TL1 When accessing the Total Access 1248 via TL1, the Save and R estore commands are use d to save or retrieve the SCA file. Sav e Use: ED-PROV-TFT P:::::FILENAME= <filename>,TFTP IPADDR=<ip_addr >,SET; Re st o r e Use: ED-PROV-TFT P:::::FILENAME= <filename>[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 6-4 61179641AL1-5C This page is intentionally blank.[...]

61179641AL1-5 C 7-1 Section 7 Specifica tions INTRODUCTION Specifications for the Tota l Access 1248 are detailed in Table 7- 1 . T able 7-1. T otal Access 1248 Spe cifica tions Specifications Descr iptions ADSL Loop Interface Modulation Type: Mode: Standards: Number of Pairs (ADSL + POTS): Downstream Data Rate: Upstream Data Rate: ADSL Service Ran[...]

Total Access 1248 Quad T1 IMA 48-Port DSLAM wit h Modem Installation and Mainten ance Practice 7-2 61179641AL1-5C Note: Current draw calculated with 8 kft copper line and maximum data rate of 8160 kbps in G.DMT mode with four cooling fans active (0.021 am ps/fan). Current draw will vary with operational circumstan ces, being subject to changes in d[...]

61179641AL1-5 C A-1 A ppendix A W ar r anty W AR R ANTY AND CUSTOMER SER VICE ADTRAN will replace or repair this product wit hin the warranty period if it does n ot meet its published specifications or fails while in se rvice. Warr anty information can be fo und at www.adtran.com/warranty . Refer to the following subsections for sales, support, Cus[...]

Carrier Networks Divis ion 901 Explorer Blvd. Huntsville, AL 35806 ®[...]