AirLive OD-325HD manuel d'utilisation

A irCam OD-325HD H.264 MegaPixel Outdoor 25M IR Night vision POE Camera Use r ’ s Manual[...]

Copyright and Disclai mer Copyright & Disclaimer No part of this publication may be reproduc ed in any form or by any means, whether electronic, mechanical, photocopying, or record ing without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ens ure the accuracy of the information in this user ’ s guide. Howeve[...]

T able o f Contents i AirLive AirCam OD-325HD User’ s Manual Table of Contents 1. Overview ..................................................................................................... 1 1.1 Introduction .......................................................................................... 1 1.2 Features ..............................[...]

T able of Contents AirLive AirCam OD-325HD User’ s Manual ii Appendix I : 3GPP ................................................................................... 73 Appendix J :Enable UPnP of Windows XP ............................................ 74[...]

1. Overview A irLive AirCam OD -325HD User’ s Manual 1 1 1. Overview This user’s guide explains how to operate this camera from a computer. User should r ead this manual completely and carefully before you operate the device. 1.1 Introduction This camera is an inexpensive and fully scalable surveillance device. Because the Network Cameras can b[...]

1. Ove rview AirLive AirCam OD-325HD User’ s Manual 2  Image transmission using an FTP or e-mail for event  DDNS and PPPoE  Multi-channel control software for surveillance application  On-line firmware upgrade  802.3af PoE support (wired model only) 1.3 Minimum System Requirements  Microsoft Internet Ex plorer 6.0 or later  M[...]

2. Pack age Conten ts A irLive AirCam OD-3 25HD User’ s Manual 3 User can find the following items in the package as below: Item Descriptions 1. 25M IR IP Cam is the main element of the product. 2. W all mount 3. W all mount st and 2. Screws x 3 3. Power Adapter dedicates 12V DC electric po wer output to Network Camera. 2 2. Package Content s[...]

2. Pack age Conten ts A irLive AirCam OD-3 25HD User’ s Manual 4 4. User ’ s Manual CD provides installation sof tware, application program, import ant information and instructions for operating the Network Camera. 5. Quick St art Guide provides important info rmation and instructions for installing this device. If any of the above items are mi[...]

2. Pack age Conten ts A irLive AirCam OD-3 25HD User’ s Manual 5 2.1 Connections 1. RJ45 LAN socket: Connect to PC or Hub/Switch. For connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negot iate the transmission speed of the network automatically. Please use Category 5 cabl[...]

2. Pack age Conten ts A irLive AirCam OD-3 25HD User’ s Manual 6 Cable for I/O connectors: Name Cable Color Function 12VDC Brown/White DC 12V (50mA maximu m) GND Blue/White GND NC Purple/White Do not connect NC Gray Do not connect DI Green/White Digital signal input DO Orange/White Digital signal output 3. Factory Default Reset This button is use[...]

2. Pack age Conten ts A irLive AirCam OD-3 25HD User’ s Manual 7 2.2 Mounting the Camera Ceiling Mount Fix the camera to ceiling with the three supplied screws. Install the Camera in LAN 1. Plug an Ethernet cable into the Camera Connect an Ethernet cable to the LAN socket and attach it into the network. 2. Connect the external power supply to Cam[...]

3. Preparation A irLive AirCam OD-3 25HD User’ s Manual 8 3.1 Search and Set up by IPWizard II When you installed the Camera on a LAN envi ronment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discover y . Here is the way to execute IPWizard II to discover Camera’ s IP address and se t up related parameter in a Camera[...]

3. Preparation A irLive AirCam OD-3 25HD User’ s Manual 9 Vi ew If IPWizard II finds network devices, View button will be available. Please select the device you want to view and click the Vie w button. Then you could see the video from camera directly . Furthermore you could double click the left butto n of mouse to link to the network device by[...]

3. Preparation A irLive AirCam OD-3 25HD User’ s Manual 10 In case, you do not want to change usernam e and/or password, then just cl ick “ Submit ” button to perform your setting accordingly . Click “ << ” button will go back to previous page. If you like to change username and/or password of the device, just click the check button[...]

3. Preparation A irLive AirCam OD-3 25HD User’ s Manual 11 3.2 Using UPnP of Windows® XP or Vista UPnP™ is short for Universal Plug and Play, which is a net working architecture that provides compatibilit y among networking equipment, softwar e, and peripherals. This device is an UPnP enabled device. If t he operating system, Windows XP or Vis[...]

3. Preparation A irLive AirCam OD-3 25HD User’ s Manual 12 Installing the device with an UPnP router on your network is an easy 3–step procedure: (1) Enable UPnP option of your NAT router 　 (2) Enable UPnP NAT traversal option of the Network Camera 　 (3) Access your Network Camera by DIPS 　 (1)Enable UPnP option of your NA T router To use[...]

3. Preparation A irLive AirCam OD-3 25HD User’ s Manual 13 2. Type in your login name and passw ord under “USERNAME” and “PASSWORD” t e x t b o x . For the first time use ( default value), input the User Name: admin Password: airlive That’s, type in “ admin” on the “USERNAME” as a default name and leave PASSWORD textbo x airlive[...]

4. Operating the Networ k Camera A irLive AirCam OD-3 25HD User’ s Manual 14 S tart-up screen will be as follow no matter an ordinary users or an administrator . Monitor Image Section The image shot by the Network Camera is s hown here. The date and time are displayed at the top of the window. Video Profile The Network Camera support mu lti-profi[...]

4. Operating the Networ k Camera A irLive AirCam OD-3 25HD User’ s Manual 15 2-Way Audio The device supports 2-way audio function. Us er can chose to enable or disable this function by toggling the icon below. : Disable audio up loading function. : Enable audio uploading function. Status Bar Shows information of the connected device su ch as enco[...]

4. Operating the Networ k Camera A irLive AirCam OD-3 25HD User’ s Manual 16 Tour: Select one of the camera tours. Camera tour is comprised by series of preset locations. Go tour: Execute the selected camera tour. Auto Pan: Execute the auto pan of camera. While aut o pan is running, the camera will swing the camera automatically. Note that the sp[...]

4. Operating the Networ k Camera A irLive AirCam OD-3 25HD User’ s Manual 17 Digit al Zoom Click Digit al Zoom to active this function as above. Us er can drag or scale the box over the video to adjust zoom ratio and position. Record Click Record to activa te this function. Press Record button to st art record ing. The video file is saved as ASF [...]

4. Operating the Networ k Camera A irLive AirCam OD-3 25HD User’ s Manual 18 Snap shot Click Snapshot to activate this function. Press Snap shot button to take a picture. The image file is saved as JPEG form at into your local PC. Select Browser , the pop-up window to select the save path and file name prefix, select OK to continue. If you like t[...]

4. Operating the Networ k Camera A irLive AirCam OD-3 25HD User’ s Manual 19 St atistics Click St atistics to activate this function. A window will be popup to show the statistics information of the streaming status. Note that this information is the st atistics between the device and your local PC. About Click About to show this ActiveX informat[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 20 5.1 System Setting This function is only available for user logged into Network Camera as administrator . Click on each menu name to display its setting p age. Item Action Network Configure Network settings such as DHCP, DDNS, 3GPP, PPPoE and UPnP Camera Adjust camera par[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 21 5.1.1 Network This section provides the menu for connecting the device through Ethernet cable. MAC address: Displays the Ethernet MAC addre ss of the device. Note t hat user can not change it. Obtain an IP address automatically (DHCP): DHCP: Stands for Dynamic Host Config[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 22 HTTP Port: The device supports two HTTP ports. The first one is default port 80 and this port is fixed. This port is very useful for Intranet usage. The second HTTP port is changeable. Users could assign the second port number of http protocol, and the WA N users should f[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 23 DDNS: To enable or disable the DDNS service here. Server name: Choose the built-in DDNS server. DDNSHost: The domain name is applied of this device. User name: The user name is used to log into DDNS. Password: The password is used to log into DDNS. Streaming PPPoE: PPPoE:[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 24 The device can directly connect to the xDSL, however , it should be setup on a LAN environment to program the PPPoE information first, and then connect to the xDSL modem. Power on again, then the devic e will dial on to the ISP c onnect to the W AN through the xDSL modem.[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 25 Streaming RTSP is a streaming control pr otocol, and a starting point for negotiating transports such as RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for controlling the media stream delivered by a media serve[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 26 In addition, this device also provides UPnP IGD function for NA T traversal easily . Use NA T traversal when your device is located on an intranet (LAN) and you wish to make it available from the other (W AN) side of a NA T r outer . With NA T traversa l properly configur[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 27 IP Filter You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy : Choose the filter policy w here is denying or allowing. IP Notification In case the IP [...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 28 TCP Notification: If enable this function, then the “ TCP Server “, “ TCP Port ”, and “ Message ” fields need to be filled. TCP Server: Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server. Message: The message will[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 29 HTTP Login Password: Type the password for the HTTP server. Proxy Address: Type the server name or the IP address of the HTTP Proxy. Proxy Port: Set port number of Proxy. Proxy Login name: Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for [...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 30 Rotation: T urn the “Mirror” and “V ertical Flip” On or OFF . The image will be overturned as below . White Balance: Auto: will adjust the white balance automatically. Hold: will hold the white balance. Exposure Control: Auto: will adjust the inte rnal gain automa[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 31 PTZ Setting Camera Protocol: This device can connect to a PTZ camera or speed dome camera and controls them thru RS485 interface. Camera Address: This is the camera ID set in PTZ camera or speed dome camera. Note that please DO NOT change the default value if unnecessary.[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 32 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item. T our Setting Up to 128 positions can be preset, and the ca mera can be programming to move to the preset position sequentially.[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 33 Tour Name: The group name of the sequence of camera tour . The maximum number of camera tour is 16. Running: Enable or disable this camera tour. Preset: Set the sequence of the tour. Maximum 16 poi nts can be assigned. The selected preset position is added in the Sequence[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 34 Device Title: You can enter the name of this un it here. It’s very useful to identify the specif ic device from multiple units. The information will be shown on IPWizard II once the device is found. Software Version: This information shows the soft ware version of the d[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 35 Time zone: Set the time dif ference from Greenwich Mean T ime in the area where the device is installed. Daylight Saving: Disable or enable the day light saving adjustment. Maintenance Hard Factory Default (Include the network setting): Recall the device hard factory defa[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 36 Firmware Upgrade: The device supports new firmware upgrade (the softwa re that controls the operation in the device). Please contact your dealer fo r the latest version if necessary. Download the latest firmware file from our website or your dealer . Unzip this f irmware [...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 37 5.1.4 Video : Configure profile This device provides 2 modes of video prof ile. The first one is Mega-pixel mode which supports video resolution up to Mega-pixel. Howe ver the maximum frame rate of this mode is up to 15fp s only . The second one is VGA mode which supports[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 38 Max Frame Rate: Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated for 15 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth. GO[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 39 Max Frame Rate: Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated for 15 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth. GO[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 40 5.1.5 Audio : Audio parameters Audio: To enable or disable audio function Audio Mode: To select Simplex or Fu ll duplex (2-way audio) mode Input Gain: To adjust gain of input audio Output Gain: T o adjust gain of output audio[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 41 5.1.6 User: Manage user name, password and login privilege Use this menu to add, update, or remove the usernames and passwords of the Administrator and viewer . Viewer login: Select “Anonymous” to allow any one viewing the video once connect ed. Otherwise, only users [...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 42 SMTP Server: Type the SMTP server name or the IP address of the SMTP server. Test: Send a test mail to mail server to che ck this account is available or not. SMTP Port: Set port number of SMTP service. SMTP Authentication: Select the authentication requi red when you sen[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 43 5.1.8 Object Detection : Setup Object detection Use this menu to specify motion detection windo w 1 to window 10 and se t the conditions for detection while observing a captured image. Add and Del: To add or delete the motion window s. User can specify up to 4 Included an[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 44 Sensitivity Defines the sensitivity value of motion detecti on. The higher value wil l be more sensitivity . 5.1.9 Event Server : Setup FTP/TCP/HTTP/SAMBA server configuration FTP Server Y ou may setup FTP p arameters for further oper ation of Event Schedule. That’ s, i[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 45 FTP Port: Set port number of FTP service. FTP Path: Set working directory path of FTP server. FTP Passive Mode: Select passive or active mode connecting to FTP server. TCP Server In addition to send video file to FTP server , the device also can send event message to spec[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 46 Name: User can specify multiple HTTP servers as wis h. Therefore, user needs to specify a name for each HTTP server setting. URL: Type the server name or the IP address of the HTTP server. Test: Check the HTTP server whether it is available or not. HTTP Login name: Type t[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 47 Proxy Port: Set port number of Proxy . SAMBA Server The device also can send video stream to specified SAMBA server . Name: User can specify multiple HTTP servers as wis h. Therefore, user needs to specify a name for each HTTP server setting. SAMBA Server: Type the server[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 48 5.1.10 Event Schedule : Configure the event schedule Setting This menu is used to specify the schedule of Event or Schedule T rigger and activate the some actions provided by this device. Where the Schedule T rigger will be activated by user-define interval without event [...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 49 Example 1: Send file to FTP server by motion triggered always: 1. Select event trigger 2. Enable time: start fr om 00:00 to 24:00 every day 3. T rigger by: Motion Area (Added in Object Detection page) 4. Action : Send FTP (Add in Event Server -> FTP Server p age) Examp[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 50 Example 3: Enable V oice Alert every 10-minute during 18:00 to 24:00 from Monday to Friday . 1. T ype: Select schedule trigger and interval is 10-minute. 2. Enable time: Select Monday to Friday , and set start time from 18:00 and keep work in 6 hous. 3. T rigger by : Y ou[...]

5. Adm inistrating t he Devic e A irLive AirCam OD-3 25HD User’ s Manual 51 Record User can choose the type of record f ile for event or schedule application. Record File Type: Choose AVI or JPEG file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out.[...]

Appendi x A A irLive AirCam OD-3 25HD User’ s Manual 52 Appendix A : Alarm I/O Connector Some features of the Camera c an be activated by the external sensor that senses physical changes in the area Camera is monitoring. These changes can include intrusion detection or certain physical change in the monitored area. For examples, the external sens[...]

Appendi x A A irLive AirCam OD-3 25HD User’ s Manual 53 CAUTION! • THE LOW VOLTAGE/CURRENT CIRC UITS AND HIGH VOLTAGE/ CURRENT CIRCUITS ARE IN THE NETWORK C AMERA CIRCUIT. THE QUALIFIED EL ECTRICIAN SHOULD DO THE WIRING NOT BY YOURSELF. I NCORRECT WIRING COULD DAMAGE NW TWORK CAMERA. YOU COULD RECEIVE THE FATAL ELECTRI C SHOCK. • THE EXTERNAL[...]

Appendi x B A irLive AirCam OD-3 25HD User’ s Manual 54 Appendix B :Frequently Asked Questions Question Answer or Resolution Features The video and audio codec is adopted in the device. The device utilizes H.264, MPEG4 and JPEG triple compression to providing high quality images. Where H.264 and MPEG4 are standards for video compression and JPEG [...]

Appendi x B A irLive AirCam OD-3 25HD User’ s Manual 55 device. • Check the firewall setting of your PC or Notebook. Internet Explorer does not seem to work well with the device Make sure that your Internet Explorer is version 6.0 or later. If you are experiencing problems, try upgrading to the latest version of Microsoft’s Internet Explorer [...]

Appendi x B A irLive AirCam OD-3 25HD User’ s Manual 56 • If it’s not working after above procedure, reset Network Camera to default setting and installed it again. • If the problem is not solved, the Network Camera might be faulty. Contact your dealer for further help. Image or video does not appear in the main page. • The first time the[...]

Appendi x B A irLive AirCam OD-3 25HD User’ s Manual 57 about the transferring mode of FTP server. Pan/Tilt does not work. (including Click to Center and Preset Positioning) • Click [Refresh] on the Internet Explorer when the communication stops with the device. The image will refresh. • Other clients may be operating Pan/Tilt. • Pan/Tilt o[...]

Appendi x C A irLive AirCam OD-3 25HD User’ s Manual 58 Appendix C : PING IP Address The PING (stands for Packet Internet Gr oper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confir m Network Camera installe d or if the[...]

Appendi x D A irLive AirCam OD-3 25HD User’ s Manual 59 Appendix D : Bandwidth Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, c odec type, and quality setti ng of server. Here is a guideline to help you roughly estimate the bandwidth requirements form you[...]

Appendi x E A irLive AirCam OD-3 25HD User’ s Manual 60 Appendix E : Specifications Camera Image Device 1.3 Mega-pixel image sensor Effective Pixels 1280 x 1024 pixels Sensitivity 1.0V/lux-sec (550nm) Signal to Noise 44dB Lens F:1.8 ; f:4.3mm Pan & Tilt Pan Degree 355 Tilt Degree -10~90 ° Manual Pan Degree 180 ° / second (max) Manual Tilt D[...]

Appendi x E A irLive AirCam OD-3 25HD User’ s Manual 61 Users 20 simultaneous unicast users Unlimited users using multicast Ethernet 10/100M auto negotiation System Integration Application Programming Interface Open API for software integration SDK Alarm T riggers Intelligent video motion detection and external input Motion Detection 10-zone vide[...]

Appendi x F A irLive AirCam OD-3 25HD User’ s Manual 62 Appendix F : Configure Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP address needs to be setup as fixed IP address, also the port forwarding or Virtual Server function of router needs to be setup. This device supports U[...]

Appendi x F A irLive AirCam OD-3 25HD User’ s Manual 63 Y our W AN IP Addre ss will be listed here. Note: Because a dynamic W AN IP can change from time to time depending on your ISP , you may want to obtain a S tatic IP address from your ISP . A S tatic IP address is a fixed IP address that will not change over ti me and will be more convenient [...]

Appendi x F A irLive AirCam OD-3 25HD User’ s Manual 64 Follow these steps to configure your router ’ s Virtual Server settings • Click Enabled . • Enter a unique name for each entry. • Select Both under Protocol Type ( TCP and UDP ) • Enter your camera’s local IP Address (e.g., 192.168.1.100 , for example) in the Private I P field ?[...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 65 Appendix G : DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like w ww.yourname.com, www.yourname.com.tw etc. (Note: This dom ain must be registered with Internic via registratio[...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 66 (3). Af ter the columns show up at the left side, click “ Cre ate Account” (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input informa tion and finish creating an account[...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 67 Click these two options[...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 68 (5). Check your e-mail mailbox. There wil l be an e-mail with a title “Y our DynDNS Account Information“. Click the hyperlink addr ess to confirm the DDNS service that you just applied. Then DDNS you applied activated. (6). Enter the web p age http://www .dyndns.org/ again. Input your us[...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 69 (7). If the correct username and passw ord are input, you can see the following picture at the top -right of the login page. ( 8 ) . C l i c k t h e “ Services”. ( 9 ) . C l i c k t h e “ Dynamic DNS ”. Input your account[...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 70 (10). Click the “ Get S tarted ”. (1 1). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to remember . ( P i n k N o . 2 ) T h e 3 rd step is to click “Offl ine Hostname” from Service T ype. [...]

Appendi x G A irLive AirCam OD-3 25HD User’ s Manual 71 4. Setup the DDNS and PPPoE of Networked Device At last, users have to enter the web p age of Networked Device and setup the necessary information of DDNS and PPPoE after the applicat ion of DDNS service. Please check the user manual to access the DDNS and PPPoE pages . After saving the modi[...]

Appendi x H A irLive AirCam OD-3 25HD User’ s Manual 72 Appendix H : Power Line Frequency COUNTR Y VOL T AGE FREQUENCY COMMENTS Argentina 220V 50 Hz *Neutral and line wires ar e reversed fr om that used in Australia and elsewhere. Australia 230V* 50 Hz *Outlets typically c ontrolled by adjacent sw itch. Though nomina l voltage has been o fficial [...]

Appendi x I A irLive AirCam OD-3 25HD User’ s Manual 73 Appendix I : 3GPP To use the 3GPP function, in add ition to previous section, you might need more information or configuration to make this function work. Note that to use the 3GPP function, it strongly recommends to install the Networked Device with a public and fixed IP address without any[...]

Appendi x J A irLive AirCam OD-3 25HD User’ s Manual 74 Appendix J : Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operati ng system of PC is running Windows XP . Go to St art > Settings Click Control Panel[...]

Appen dix J A irLive AirCam OD-3 25HD User’ s Manual 75 Click Add or Remove Programs Click Add/Remove Windows Components The following screen will appear:[...]

Appendi x J A irLive AirCam OD-3 25HD User’ s Manual 76 Select Networking Services Click Det ails Select Universal Plug and Play Click Ok[...]

Appen dix J A irLive AirCam OD-3 25HD User’ s Manual 77 Click Next Please wait while Setup configures the components. Click Finish[...]