Briggs & Stratton Harrier 41 manuel d'utilisation

(Auto Drive) (English V ersion) FROM SERIAL NO: 410A001001, 41 1A001001, 412A001001 HANDBOOK: 410066 (REV .2.) ISSUE 08.07.02 CODE 410A . 41 1A . 412A (Electric Start V ariable Speed) OWNER'S HANDBOOK Harrier 41 (Push)[...]

Engine Briggs & Stratton Quantum XTS 45 Engine type 12F802-1325-01 (410) 12F802-1325-01 (41 1) 12F807-1324-01 (412) Engine/Cutterbar speed 3000 rpm Fuel type Unleaded petrol Fuel capacity 1.5 litres Oil type SAE 30 engine oil Oil sump capacity 0.6 litres Cutting width 410mm Cutting height 13 - 60mm Overall dimensions 1050 x 446 x 1375mm Dry W e[...]

1.19 - 1.25 Mower Maintenance 1.19 - Engine 1.19 - Thr ottle Cable Adjustment 1.19 - Carbur ettor Adjustments 1.20 - Oil Service 1.20 - Air Cleaner Service 1.21 - Spark Plug Service 1.21 - Keeping Engine Clean 1.21 - Grassbag 1.22 - Deck Housing 1.22 - Securing Nuts and Bolts 1.22 - Clutch Cable Adjustment 1.23 - Lubrication 1.23 - Cutterblade Remo[...]

INTRODUCTION 1.4 Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications. Read and unde[...]

W ARRANTY 1.5 LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engines furnish their own warranty and services are provided through their authorised [...]

SAFETY PRECAUTIONS 1.6 This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used correctly . Failur e to observe the following precautions may r esult in serious injury . Before using the mower [...]

PRECAUTIONS SAFETY 1.7 - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replace[...]

Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug le[...]

SAFETY PRECAUTIONS 1.9 Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety . If the fuel tank has to be drain[...]

ASSEMBLING THE MOWER 1.10 Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 2. W arranty Reg. Card. 3. Grassbag. 4. Charger (412) 5. Ignition Key (412) T o prevent accidents cut off the long ribbon attached to the gra[...]

MOWER THE ST AR TING 1.11 T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. T o prolong the life of your engine it is important th[...]

Controls Operate all control levers several times and ensure that the cables move freely . Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position. Move the throttl[...]

MOWER THE OPERA TING 1.13 (412 Only) - Stand behind the mower and hold the handlebar together with the engine stop lever . T urn the ignition key in a clockwise direc- tion and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine. Note: cranking the engi[...]

1.14 T o prevent engine damage do not use the mower on slopes greater than 20 degrees. Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings[...]

1.15 Remove the grassbag and operate the mower with the rear deflector in the closed position. Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum h[...]

1.16 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . The yearly lawn work programme really starts this month. As soon as the ground conditions a[...]

1.17 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow . Rake out the thatch from the t[...]

1.18 After the very first hour check clutch adjustment. See page 1.22. After the very first five hours change the engine oil. Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after extensive ope[...]

1.19 T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . 1. Air Filter 2. Fuel Cap 3. Start Grip 4. Oil Cap/ Dipstick 5. Exhaust Guard 6. Spark Plug / Lead Loosen casing clamp screw (1) and move the governor lever (2) in the direction of screw (1) as far as posib[...]

1.20 Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engin[...]

1.21 B R I G GS & S T R A T T O N HA R R IE R 41 Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer . Check the spark plug gap with a[...]

1.22 Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings ar e particularly corrosive. Thoroughly clean the mower deck immediately after use on tr eat- ed grass and store well away fr om corrosive materials. Regularly check that all securing nuts and bolts are tight. Replace missing[...]

1.23 Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine [...]

1.24 Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), and distance piece (3) and tighten to a torque of 54Nm A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing [...]

1.25 BR IGGS & ST R AT T O N H A R R I E R 4 1 Storage T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam- aged thro[...]

MOWER MAINTENANCE (412 only) - PREVENT ACCIDENTS: AL W A YS charge the bat- tery in a well ventilated area. NEVER charge the battery near naked flames or direct heat. AL W A YS switch off the mains electricity supply before discon- necting the charger from the battery . AL W A YS use the battery charger supplied with the mower . Battery charging sh[...]

1.27 PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever . Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Battery discharged (412 Only) Charge battery Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner . soaked [...]

1.28 PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft. Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblade worn Sharpen the cutterblade Cutterblade out o[...]

CONFORMITY OF DECLARA TION 1.29 VIBRA TION INFORMA TION Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the handlebars. CODE 410A = 6.9ms -2. . CODE 41 1A = 6.9ms -2. . CODE 412A = 6.9ms -2 . EC DECLARA TION OF CONFORMITY HA YTER LIMITED, Spellbrook, Bishop’ s Stortford, Herts CM23 4BU ENGLA[...]

1.30 PA R T S LIST ITEM NO. 1 Mainframe 410010V 1 1 1 2 Cover- Side RH 410033 1 1 1 3 Screw - T aptite M6x16 09365 33 32 32 4 Rod - Deflector 305103 1 1 1 5 Key - W oodruff 1662 1 1 1 6 Decal - Grass Blade 410064 1 1 1 7 Engine - E/S 412001 0 0 1 Engine - 410007 1 1 0 8 Decal - Engine 410061 1 1 1 9 Cover - Nut M8 234051 2 2 2 10 Nut - Nyloc M8 094[...]

1.31 LIST PA R T S ITEM NO. 39 Fabric - Grassbag 410039 1 1 1 40 Deflector - Rear 410028 1 1 1 41 Bolt - Coach M8x40 09379 2 2 2 42 Plug - Drive Small 300144 4 4 2 43 Ratchet - HOC 410006 1 1 1 44 Decal - HOC 320006 1 1 1 45 Screw - Self T ap Engine 09349 3 3 3 46 Decal - Hayter 410065 1 1 1 47 Chute 410058 1 1 1 48 Nutsert 410076 1 1 1 49 Cover - [...]

1.32 PA R T S LIST ITEM NO. 79 Cover - Side LH 410032 1 1 1 80 Lever - HOC 480128 1 1 1 81 Spring - HOC 480132 1 1 1 82 Screw - T aptite M6x35 09786 2 2 2 83 Frame - Roller W/A 41001 1W 1 1 1 84 Shell - Roller 410044 1 1 1 85 Shaft - Roller 41 1038 1 1 1 86 Pin 41 1037 1 2 2 87 Cover - Drive 41 1013 1 1 1 88 Chain 41 1016 0 1 1 89 Sprocket - Roller[...]

11 8 71 70 11 8 1 2 3 3 3 4 5 6 9 10 13 14 17 17 19 18 20 25 23 28 29 30 34 33 31 38 39 11 12 41 3 3 3 79 47 49 68 76 78 80 81 91 91 83 84 3 97 95 101 100 99 102 103 104 108 105 106 107 BRI G G S & S T R ATTON H A R R I ER 41 3 3 3 3 3 3 3 3 3 7 8 9 10 13 14 15 15 16 16 20 24 42 27 28 30 36 40 43 44 45 45 45 46 48 3 3 3 3 3 74 82 85 87 90 96 90[...]

41 1A/412A PA R T S LIST 1.34 1 2 3 3 3 4 5 6 9 10 13 14 17 36 17 19 18 21 20 25 23 28 29 30 34 33 31 32 35 38 39 11 12 111 41 3 3 3 79 47 50 49 51 55 59 61 58 67 68 69 70 71 75 76 63 64 78 80 81 91 91 83 84 86 93 92 89 88 3 97 95 101 100 99 102 103 104 108 105 106 107 11 7 52 B R IGGS & STR A TTON H A R R IE R 41 3 3 3 3 3 3 3 3 3 3 7 8 9 10 1[...]

/NOTES Mower Serial No:................................................................................. Engine Model:.................................. T ype:....................................... Code:..................................... Notes: 1.35 INFORMA TION CUST OMER[...]

We hope you find the links below useful. For further ga rdening information visit Gardening Tools Direct Blower Vacs Brush cutters Brushcutters Chainsaws Chain saws Cultivators Cylinder lawn mowers Cylinder mowers Echo chainsa ws Echo Strimmers Electric chainsaws Fertiliser spreaders Garden blowers Garden rollers Garden shredders Garden tractors Ga[...]