Canon DPUG9 manuel d'utilisation

CDI-M206-010 © 2005 CANON INC. PRINTED IN CHINA DPUG9 Direct Print User Guide ダイレクトプリントユーザーガイド Direct Print User Guide パソコンがなくても大丈夫！ カメラとプリンターを接続してかんたんに印刷 Y ou don’t even need a compu ter ! Just connect your camera to your printer and print DPUG9_[...]

ENGLISH Introduction — Confirm Your Printer Model and the Sec tion that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camer a to the pri nter wit h an appropri ate cable and confir m the icon displ ayed in the camer a[...]

1 * Please also refer to th e user guide that came with your printe r. Confirm your printer model. Read the page below. Printer model Refer to the sections indicated SELPHY CP series Page 10 " Printing with SELPHY CP Series Printers using PictBridge " PIXMA/ SELPHY DS series Page 31 " Printing with B ubble Jet Printers (PIXMA series/[...]

2 Trademark Acknowledgements • N ames and produ cts in this guid e may be registe red trademarks or trademarks of their respective compan ies. • Co pyright © 2005 Cano n Inc. All rights r eserved. For the latest information regarding connections between Canon printers and cameras, please refer to the following URL: http://web.canon.jp/Imaging [...]

3 Table of Contents Direct Pr int . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Allows for Printing without th e Use of a Computer . . . . 6 Various Printing Operations Can Be Performed . . . . . . . 6 You Can Also Perform the Following Printing Opera tions . .7 Printing Movies (Movie Print) . . . . . . . . . . . .[...]

4 Printing wi th Bubble J et Printers (PIXMA se ries/ SELPHY DS series) using PictBridge . . . . . . . . . . . . . . . . . 31 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Print after Changing the Print Setting s . . .[...]

5 Printing with Bubble Jet Printers using Bubble Jet Direct . . 68 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Settings that Can Be Set with the Camera . . . . . . . . . . . . . . . . . 71 SELPHY CP Series Printers using Pict[...]

6 Direct Print Allows for Printing without the Use of a Computer Connect your camera to the printer with the appropriate cable. Image selection and printing is operated from the camera. Various Printing Operat ions Can Be Performed* Multipl e pictures can be pri nted at once . (DPOF pri nt sett ing) Prints to cover the entire surface o f the paper [...]

7 You Can Also Perform the Following Pri nting Operat ions Printing Movies (Movie Print) 107-J006 6"25 12"50 18"75 1"25 7"50 13"75 20"00 2"50 8"75 15"00 21"25 3"75 10"00 16"25 22"50 5"00 11"25 17"50 23"75 Movie frames can be e xtracted at fair ly regular [...]

8 Connecting the Ca mera to the Printer Connect the camera to the printer. For instr uctions on printer and camera operation methods, refer to their r espective user guides. Set one of the following into the camera. • Compact power adapter (sold s eparately or supplied with the camera) • Fully charged battery • New batteries Place paper, ink [...]

9 Disconnecting the Camera and the Printer Detach the cab le from the printer. Pull out the cable while holding the connector plug. Do not pull out by the cable. Turn the camera’s power off. Detach the cab le from the c amera. Pull out the cable while holding the connector plug. Do not pull out by the cable.[...]

10 Printing Easy Print You can print images by p ressi ng only one button after connecting the camera to the printer. 1 Make sure tha t displays in the upper left corner of th e LCD monitor. 2 Display the images yo u wish to print and pr ess the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 11). P[...]

11 Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure that displays in the upper left corner of the LCD monitor. If displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 51). 2 Display th e images you wish to print and press the SET butto[...]

12 • You cannot print the RAW images. • It may not be possible to play ba ck or print image s shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] [...]

13 Selecting Print Settings Setting the Date and the File Number Printing Option Depending on the camera model, the screens that will be displayed will vary. Please also refer to the user guide that came with your printer. Default S etting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print E ffect], paper sett[...]

14 Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. Setting the Numbe r of Copies On Uses the camera’s shooting information to deliver optimu m prints. Off Prints without any effects. Default Print settings d iffer [...]

15 Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting th e trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. 1 Select [Trimming] and press the SET button. The trimming frame will appe[...]

16 2a Trim the image . Changing t he Size of th e Trimmi ng Frame • Press the zoom lever or the z oom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is vir tually the same size as the image. ?[...]

17 2b Trim the image. Changing the Size of th e Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

18 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operation s. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • The shooting date or part of the da[...]

19 Selecting the Paper Settings 1 Select [Paper Settings] and press the SET button. The paper size setting screen appears. 2 Select a paper size and press the SET button. The default settings and specified paper cassette size are displayed. The paper type setting screen appears. * Paper sizes vary according to region. 3 Press the SET button. The pa[...]

20 4 Select a layout . The following layout can be selected. * Credit card si ze paper only Default Print settin gs differ according to your printer model. Bordered Prints with a border. Borderless Prints right to the ed ges of the paper. N-up Prints 2, 4 or (8 *) images on a single sheet of paper (p. 21). ID Photo Specifies the print size and prin[...]

21 Printing Multiple Images on a Shee t of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. * This op tion can only be sele cted when printi ng on credit card size paper. [Printing example 1] Printin g 3 copies of image A in 2-up DPOF print setting (p. 27) allows you to separately print d[...]

22 Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) w ill allow you to specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Photo Print fu nction may not be allowed as a formal certif icate photo. Refer to the part y (organization[...]

23 T Trim the image to specify th e print area. See Step 2 of Setting the Printing Area (Trimming) (p. 16 and p. 17) on how to trim the image. The trimming setting screen differs depending on the camera model. Follow the steps according to the screen that displays on your camera. • The shape of the trimming frame varies depen ding on the specifie[...]

24 Printing Images in the F ixed Size Selecting [Fix ed Size] in the la yout setting (p. 20) will allow you to print by specifying the print size of the image on a sheet of paper. Select the fixed print size required. Depending on the paper size, you can select print sizes as follows: 5 Select a layout and press the SET button. This ends the paper [...]

25 Printing Movies (Movie Print) You can print movie frames selected automatically at fairly regula r intervals laid out in index style on a single sheet of paper. 1 Select the movie you want to print, then press the SET button. The movie control panel appears. 2 Select (Print) and press the SET button. 3 If necessary, select [On], [Off] or [Defaul[...]

26 • If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie , there are cases when the number of frames indicated below will not be printed.) • Credit card size: 2[...]

27 Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refe r to the DPOF print settings section of the Camera User Guide . In this section, we will explain how to prin t several images already specified with DP OF print settings. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. 2 Sele[...]

28 4 Select [Print] and press the SET button. • The image will start to print and, when it is completely finished, the display will revert to the standard playback mode. • If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place. • To print the date, set the [Date] setting in [...]

29 Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remainin g images can be printed. • Printing cannot[...]

30 List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, so me messages may not display.) Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incorrectly inserted or out of paper. Or the paper fee[...]

31 Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. 1 Make sure that displays in the upper left corner of the LCD monitor. 2 Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 32). Printin[...]

32 Print after Changing the Prin t Settings You can change the print settings before printing . 1 Make sure tha t displays in the upper left corner of th e LCD monitor. If displays on the LCD monitor, please refer to Printing with Bubble Jet Printers using Bubble Jet Direct (p. 68). 2 Display the images you wish to print and press the SET button. T[...]

33 • You cannot print RAW images and movies. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [...]

34 Selecting Print Settings Setting the Dat e Printing Option Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model (unavailable settings will not appear in the menu). For details, refer to the user guide th at came with your printer. Default Setting • The D[...]

35 Setting the Print Effect This function uses the camera’s shooting information to opt imize the image data, yielding high quality prints. You can select the following print effects. If you select an image which has had the shooting d ate embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [[...]

36 Setting the Numbe r of Copies 1 Select [ ] and set the number of prints. 1 to 99 copies can be set.[...]

37 Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 41) before setting th e trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. 1 Select [Trimming] and press the SET button. The trimming frame will appe[...]

38 2a Trim the image . Changing t he Size of th e Trimmi ng Frame • Press the zoom lever or the z oom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is vir tually the same size as the image. ?[...]

39 2b Trim the image. Changing the Size of th e Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

40 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operation s. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • The shooting date or part of the da[...]

41 Selecting the Paper Settings 1 Select [Paper Settings] and press the SET button. The paper size setting screen appears. 2 Select a paper size and press the SET button. The following paper sizes* are available: 4" × 6", 5" × 7" or 13 × 18 cm, 8.5" × 11" or A4, CreditCard, A3, 13" × 19" or A3+ and Defau[...]

42 3 Select a paper typ e and press the SET button. The following paper types can be selected. * Canon brand paper • Other kind of paper may be used. For the usable paper, please also refer to the printer user guide. • The option you can select will depend on the printer model and paper size. The Page Layout screen appears. 4 Select a layout . [...]

43 Printing Multiple Images on a Shee t of Paper • Selecting [4" x 6"] in the paper size setting (p. 41) will allow you to specify the foll owing layout settings. [Printing example 1] Printin g 3 copies of image A in 2-up DPOF print setting (p. 45) allows you to separately print different images by specifying the number of frames to be [...]

44 5 Select a layout and press the SET button. This ends the paper se ttings operat ions. The display returns to the print order screen. • Images will print with borders, even if [Borderless] was selected with the camera in the following cases: •When [Plain] is selected in the camera' s [Paper Type] (cannot be selected depending on the con[...]

45 Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refe r to the DPOF print settings section of the Camera User Guide . In this section, we will explain how to prin t several images already specified with DPOF print settings. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. 2 Selec[...]

46 4 Select [Print] and press the SET button. • The image will start to print and, when it is completely finished, the display will revert to the standard playback mode. • If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place. • To print the date, set the [Date] setting in [...]

47 Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remainin g images can be printed. • Printing cannot[...]

48 List of Messages The following messages may appear on the camera LCD monitor if an error occurs during a camera and printer connection. (Depending on the printer, some messages may not appear.) • Please refer to the printer’s user guide for the appropr iate remedies. : Printing restarts if you select [Continue] and press the SET button. For [...]

49 Printer erro r Disconnect the cable from the printer and turn off the printer power. Then reconne ct the cable and turn on the printer. If th e error persists, please consult the dealer where you purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the printer). Printer in use The printer[...]

50 Printing After this step, follow the procedures in the section Printing with Bubble Jet Printers (PIXMA se ries/SELPHY DS series) usin g PictBridge (p. 31) to print your images. However, the following menu opt ions cannot be set. • Print Effect (p. 35): [Vivid], [NR], [Vivid+NR] • Paper Size (p. 41): [13" x 19"/A3 + ] and [5" [...]

51 Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure that displays in the upper left corner of the LCD monitor. 2 Display the images you wish to print and press the button. If you wish[...]

52 2 Display the images you wish to print and press the SET button. The print order screen appears. 3 Select print settings as required. 4 Select [Print] and press the SET button. If you press the MENU button, the display will revert to the standard playback mode and printing will no t take place. • You cannot print the RAW images. • It may not[...]

53 Selecting Print Settings Setting the Number of Cop ies Setting the Print Style (Image, Borde rs and Date) You can select from among the following print styles. * This option ca n only be selecte d when printing o n credit card size pape r. 1 In the prin t order screen , select [ ] and set the number of prints. 1 to 99 copies can be set. Image St[...]

54 3 Select setting s as needed. 4 Press the MENU button to end the setting selection process. With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly. If you have not specified a trimming setting, a frame will appear around the area of the image that will be printed, allowing you to check the portion that[...]

55 Setting the Printing Area (Trimming) You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings. If the print style is changed after having made the trimming settings, you must select the settings again. 1 Select [Trimming] and press the SET button. The trimmi[...]

56 2a Trim the image . Changing t he Size of th e Trimmi ng Frame • Press the zoom lever or the z oom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is vir tually the same size as the image. ?[...]

57 2b Trim the image. Changing the Size of th e Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

58 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operation s. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • The shooting date or part of the da[...]

59 Printing by Specifying the Prin t Size (ID Photo Print) You can specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Photo Print fu nction may not be allowed as a formal certificate pho to. Refer to the party (organ ization) or administra tion requiring the photo. The print size can [...]

60 3 Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (p. 56 and p. 57) on how to trim the image. The trimming setting screen differs depending on the camera model. Follow the steps according to the screen that displays on your camera. 4 Press the SET button to close th e setting menu. 1.4 inch 1.5 inch 1[...]

61 • The print size setting only applies to one image . • The print size setting is cancel ed with the following opera tions: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shape of the trimming fr[...]

62 Printing Movies (Movie Print) You can print movie frames selected automatically at fairly regular intervals laid out in index style on a single sheet of paper. 1 Select the movie you wan t to print, then press the SET button. The movie control panel appears. 2 Select (Print) and press the SET button. 3 If necessary, select [On] or [Off] in (Capt[...]

63 • If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper is determined by the paper size shown as fo llows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) • Credit card size: 2[...]

64 Printing with DPOF Print Settings For instructions on how to set DPOF print settings, plea se refer to the DPOF print settings secti on of the Camera User Guide . In this section, we will explain how to print several images alread y specified with DPOF print settings. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. 2 Sele[...]

65 4 Select [Print] and press the SET button. • The image will start to print and, when it is completely finished, the display will revert to the standard playback mode. • If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place. • To print the date, set the [Date] setting in [...]

66 Restarting Printing • Select [Resume] and press the SET button. T he remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting. • If the image for which the print settings were set has b een deleted before restarting. • If there was ver[...]

67 List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer co nnection. (Depending on the printer model, some messages may not display.) • Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incorrectl y inserted or out of paper. Or the pape[...]

68 Printing After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 5 1) to print your images. However, please note that some menus and precaution s differ, as listed below. See pages 52 and 65. 1 Make sure tha t displays in the upper left corner of th e LCD monitor. If displays, re[...]

69 See page 53. Setting the Print Style You can select from among the following print styles. Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error mes[...]

70 See page 65. • The ID photo print function cannot be used. • If you select an image which has had the shootin g date embedded in it using a camera with the Postcar d Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image . • To print the date, set the [Dat[...]

71 Settings that Can Be Set with the Camera SELPHY CP Series Printers using PictBridge (When appears on the ca mera’s LCD monitor during a connection ) * This option can only be selected when [Cre ditCard] size paper is set. Print Op tions Sele ctable wit h the Camer a Date/File No. Date File No. Both Off Default Print Effe ct Off On Default Numb[...]

72 Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge (When appears on the camera’s LCD monitor during a connection) Some settings are not available wi th certain cameras and printe rs. Print Options Sele ctable with the Camera Date Date Off Defaul t Print Effec t Off On Vivid NR Vivid+NR Defaul t Number of Prin ts 1 to 99 Trim[...]

73 * 1 Paper sizes vary according to region. * 2 This option can be specifie d by selecting [4" x 6"] in [Paper Size ]. Paper Setting s Paper Size* 1 4" × 6" 5" × 7" or 13 × 18 cm 8.5" × 11" or A4 CreditCard A3 13" × 19" or A3+ Default Paper Type Photo Fast Photo Plain Default Page Layout Borde[...]

74 SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When or appears on the camera’s LCD monitor d uring a connection) * Paper size will be set automatically according to the paper cassette set to the printer. Print Options Selectable with the Camera SELPHY CP series Printers using Canon Direct Print [...]

75 MEMO[...]

76 MEMO[...]