Christie Digital Systems 020-000141-01 manuel d'utilisation

LX1000 USER MANUAL 020-000141-01[...]

[...]

= Lens not included. User Manual LX1000 User Manual 1 020-000141-01 Rev. 1 (05-2009)[...]

2 This Multimedia P rojector is designed with most advanced tec hnology for portability , durabilit y , and ease of use. This projector utilizes built-in multimedia f eatures, a palet te of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . U Functionally Ric h U Simple Computer S ystem Set ting The projector has the[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ures and Design ................ 2 T able of Contents .................. 3 T o The Owner ..................... 4 Saf ety Instr uctions ................. 5 Air Circulation 6 Install[...]

4 CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P AR TS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SER VICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGERO US V OL T A GE CONSTITU TING A RISK OF ELECTRIC SHOCK IS PRESENT WI THIN THIS UNIT . THIS S YMBOL INDICA TES THA T [...]

5 All the saf ety and operating instructions should be read before the product is operated. Read all of the instr uctions given here and retain them for later use. Unplug this projector from A C power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all w arnings and instructions mark ed on the p[...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the follo wing precautions should be taken. – Do not put any fla[...]

7 Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down ward, or inclined position in perpendicular direction to the horizontal plane. Installing the Pr oject or in Pr oper Dir ecti[...]

8 Mo ving the Pr ojector CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suitable carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuit able transport case. This m[...]

9 The A C P ower Cord supplied with this projector meets the requirement f or use in the countr y y ou purc hased it. AC P o wer Cor d for the Unit ed States and Canada: A C P ower Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and certified by the Canadian Standard A ssociation (CSA). A C P ower Cord has[...]

10 H 8 E G F r ont B D J L < Bac k D Lens Mount Co ver J Pr ojection Lens (Option) 8 Indicators E Infr ared Remot e Receiver (Fr ont)  CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side.  Infrared Remot e Receiver (Rear)  Exhaust V ent G Adjustable Feet L T er [...]

11 T er minals and Connectors E  R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). 8 USB CONNECT OR (Series B) USB connector is to used to ser vice the projector . < S-VIDEO INPUT J ACK Connect the S-VIDEO output signal from video equipment to this j[...]

12 < FOCUS but ton Adjust the f ocus. (p.27) J ZOOM butt on Zoom in and out the images. (p.27) D ON/ST AND-B Y butt on T urn the projector on or of f . (pp.23,24) B INPUT butt on Select an input source INPU T 1, INPU T 2, Input 3 or Input 4. (pp.31 -33) L A UTO PC ADJ . butt on A utomatically adjust the computer image to its optimum [...]

13 Indicat ors D J 8 E G L H 8 W ARNING TEMP . indicator This indicator flashes red when internal projector temperature is too high. (pp.65, 72-7 4) H LAMP 1 REPLACE indicat or T urn orange when the lif e of the projection lamp1 draws to an end. (pp.61, 73) D LAMP Indicat or This indicator is dim when the projector is t urned on. And bright w[...]

79 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Ground V ert. sync. DDC Cloc k 9 13 10 12 11 14 15 CONTROL POR T CONNECT O[...]

15 Remot e Contr ol Bat tery Installation 12 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size bat ter ies F or correct polarity (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o ensure saf e operation, please obser ve the follo wing p[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interference from other remote controls when se veral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code f or the projector first before c hanging[...]

17 Installation Lens Installation Bef ore set ting up the projector , install Projection Lens on the projector . Bef ore inst allation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, cont act sales dealer where you purc hased the projector . - Do not use the optional lens below f or th[...]

18 Pictur e Lev el and Pitch Adjustment Installation AD JUST ABLE FEET REAR AD JUST ABLE FEET (R efer to p.1 0) Projection lens can be mo ved from side to side and up and down with the motor -driven lens shif t function. This function makes the positioning of images easy on the screen.(See page 27) Lens Shif t A djustment When the lens is shif ted [...]

19 T er minals of Project or The projector has two replaceable Interf ace board slots. The projector's functions can be extended b y inst alling the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are provided in your purc hasing the projector . F or the Optional Interface Boards, contact sales dealer where y[...]

20 Installation Connecting t o Computer V GA Cable Monitor Output Desktop type Laptop type T er minals of the project or Monitor Output D VI Cable BNC Cable Monitor Output 5NPLUG THE POW ER CORDS OF BOTH THE PROJECTOR AND EXTERNAL EQUIPMENT FROM THE ! #OUTLETBEFORECONNECTINGCABLES Cables used fo[...]

21 Installation Connecting t o Video Equipment Video Source (e xample) Video Casset te Recorder Video Disc Pla yer RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment. (suc h as DVD pla yer or high-definition TV source.) Component Video Output BNC Cable Digital Output ( HD CP compatible) D VI Cable SCART -VG A Ca[...]

22 NOTE ON THE PO WE R CORD A C power cord must meet the requirements of the country where you use the projector . Confirm the A C plug type with the c hart below and proper A C pow er cord must be used. If the supplied A C po wer cord does not matc h your A C outlet, cont act your sales dealer . Pr oject or side A C Outlet side T o POWER CORD CONN[...]

23 T ur ning On the Project or Connect the projector’ s A C pow er cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate. The [...]

24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P ower of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f . Af ter the projector is t urned of f [...]

25 Side Contr ol SELECT butt on Ho w to Oper ate the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual. Use the P oint  but tons to select a Menu icon. Use the P[...]

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image lev el among Standard, Real, and Image 1–1 0(p. 38). Used to adjust the size of the image. [Normal/T rue/Wide/ F ull screen/Custom/Key stone/Ceiling/Rear/Reset/Digital zoom +/–] (pp.39-40[...]

27 Oper ating with Pr ojector Contr ol Display “L ens shif t” on the screen. Use the P oint !  but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo ved up or down to 50 percent, or si d eways u p to 1 0 percent from the central axis of the lens shif t. Lens Shif t A djustment [...]

28 Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to display the information windo w on the screen. T o hide the information windo w , press the INFORMA TION but ton again or P oint  but tons. The[...]

29 Oper ating with Remote Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freez e the pict ure on the screen. T o cancel the FREEZE functi[...]

30 KEY S T ONE butt on Reduce the upper width with P oint ! button. Reduce the lo wer width with P oint button. Reduce the lef t part with P oint   button. Reduce the right part with P oint  button. s 4HEWHITEARRO WSINDICATETHATTHEREISNOCORRECTION s !REDARROWINDICATESTHEDIRECTIONOFCORRE[...]

31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPU T 3 or INPU T 4 but ton on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPU T 4 as you press the INPU T but ton. Bef ore using the INPUT but ton on the remote control, y ou must select a correct input source b y On-Screen Menu and the latest input sou[...]

32 Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ! but tons to mov e the red arrow pointer to the desired input and then press the SELECT but ton. Then y ou can switc h to the desired input. 1 2 Use the P oint ! but tons to select the de[...]

33 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. [...]

34 Comput er Syst em Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXG A+, WXGA, UXG A, or WUXGA (ref er to “Compatible Computer Specifications” on pages 75-7 6). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to pro[...]

35 A ut o PC A djustment A uto PC A djustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint   but tons to mov e the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ![...]

36 Manual PC A djustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It al[...]

37 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Move the red ar row pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select Reset and press the SELECT but ton. A confirmation box appears and then select [Y es].[...]

38 Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ! but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le vel preset on the projector . Stan[...]

39  Note: s 4 RUE& ULLSCREENAND$IGITALZOOMnCANNOT BESELECTEDWHENNOSIGNALISDETECTEDINTHE 0#3Y STEM-ENUP s 4HE PROJECTOR CANNOT DISPLA Y AND RESOLUTION  HIGHER THAN    X    )F YOUR CO[...]

40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. Press the SELECT but ton to expand the image size. Use the P oint !  but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al zoom + mode b y pressing the D .ZOOM but to[...]

41 A V SY S TEM MENU (VIDEO OR S-VIDEO) A V SY S TEM MENU (COMPONENT VIDEO) V ideo Syst em Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the A V S ystem Menu icon. Use the P oint ! but tons to mov e the red arrow pointer to the desired system and then press the SE[...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ! but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Imag e Level Selection Mov e the red frame pointer to t[...]

43 Scr een Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ! but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2  Note: s  7IDECANNOTBEOPERATEDWHEN [...]

44 Ke ystone This function is used to store or reset the k ey stone correction when the Main On/Of f Switc h is pressed to Off or the A C pow er cord is unplugged. Use the P oint  but tons to switc h between eac h option. Store . . . Keep the ke ystone cor rection ev en when the Main On/Of f Switc h is pressed to Off or the A C pow er cord[...]

45 Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ! but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint  but tons to adjus[...]

46 A uto pictur e control Use the P oint  but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c hec k mark if you do not w ant to apply the adjuste[...]

47 Use the P oint  but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint  but ton to decrease the sharpness of the image; press the P oint  but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressive [...]

48 Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, Italian, Spanish, P ortuguese, Dutc h, Sw edish, Russian, Chinese, Korean, or J apanese. Use the P oint [...]

49 This function allo ws you to customiz e the screen logo with Logo select, Capture, and L ogo PIN code lock functions. Logo  Note: s "EF ORECAPTURINGANIMAGESELECT h3TANDARDvINTHE)MAGE 3ELECT-ENUTOCAPTUREAPROPERIMAGEPP s !SIGNALFROMACOMPUT[...]

50 Change the Log o PIN code lock set ting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint  buttons to switc h On/Off , This function pre vents an unauthoriz ed person from c hanging the screen logo. Of f . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen lo[...]

51 Lamp control Choose the running speed of cooling f ans from the following options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an control This function allo ws you to c hange the brightness of the screen. Auto . . . . . Brightness according to the input signal. Normal . . . Normal brightness. Eco . . . . . . Low [...]

52 P ow er management Time lef t before the lamp is of f Press the SELECT but ton at Po wer management and the dialog box appears. Use the P oint  but tons to c hoose one of the three options. Press the P oint button to select the timer , and then use the P oint   but tons to set the timer F or reducing pow er consumption as well [...]

53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint !  buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthoriz ed persons. . . . . . Unloc ked. . . . . . Loc k the side control but [...]

54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 80, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST AR TED. The PIN code can be c hanged to your desired f our -digit number . Press the P oint bu[...]

55 Set ting Shutt er Shut ter function is av ailable to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control Selecting "On" prohibits the shut ter operation from the remote control. Projector .[...]

56 F actory def ault This function ret urns all setting v alues except f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est pa[...]

57 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef fectiv eness and may result in internal heat buildup and adversely af f ect the life of the projector . This projector has an[...]

58 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position and close the filter cov er . Make sure that the filter[...]

59 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ! but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box app[...]

60 Lamp Manag ement This P rojector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management F unction. The Lamp Management F unction detects the status of lamps and sho ws the status on screen or on the LAMP 1/2 REPLA CE indicators. This function also automatically controls the Lamp Mode wh[...]

61 Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Cover . Slide and open the Lamp Cov er until it makes a clic king sound. (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector , press the Main On/Of[...]

62 Maint enance and Car e ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, giv e the follo wing information to the dealer .  L  Model No. of y our project or : LX1 00 0  L Replacement Lamp T ype No. : 003-120479-0 1 (Ser vice Parts No. 61 0 341 9497) Reset ting the Lamp Count er[...]

63 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. L Lamp lif etime may dif fer from lamp to lamp and according to the en vironment of use. There is no guarantee of the same lif etime for eac h lamp. Some lamps may fail or terminate[...]

64 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C power cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blower to clean the lens. A void [...]

65 The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the st ate of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a cert[...]

66 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Mak e sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po wer cords are properly connecte[...]

67  appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 55) appears on the scr een – The filter is out of scroll. R eplace the filter cartridge with a new one promptly . (See pages 57 -58) The image is out of f ocus. – A djust the focus of the projector . – Chec k Projectio[...]

68 W ARNING: High voltag es are used t o operat e this project or . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instr uctions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. We will advise y ou how to obtain se[...]

69 Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to System (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq. V -sync freq. Projector Infor mation Ke y loc k Screen Language Lamp mode P[...]

70 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal Tr u e Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit = Sy stem displaye[...]

71 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu/Quit Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided. Menu Logo Lamp control Both/F ront/Bac k Normal/Max P ow er management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Of f/Ready/Shut down 1–30 [...]

72 Indicat ors and Pr ojector Condition Chec k the indicators for the projector condition. The pr ojector is oper ating nor mally . sssON sssOF F sss BLINKINGATTHENORMALRATE  (approx. 1 second ON, 1 second OFF) sssDIM sss BLINKINGSLOW?[...]

73 Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The pr[...]

74 Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig.2) appears on the screen and the W ARNING FIL TER indi[...]

75 Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment can be limited when these modes are selected. Appendix = “T r ue ” cannot be selected when WUXG A1, UXGA2, UXG A3, UXGA4 and UXGA5 are selected[...]

76 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix  Note: s $EPENDINGONTHECONDITIONOFSIGNALSANDTHETYPEANDLENGTHOFCABLESTHESESIGNALSMAYNOTBEPROPERLYVIEW ED s 3PECIFICATIONSARESUBJECTTOC HANGEWITHOUTNOTICE ON-SCREEN DISP[...]

77 T echnical Specifications Mechanical Inf ormation Projector T ype Multi-media Projector Dimensions (W x H x D) 20.87” x 1 0.53” x 29.8” (530 mm x 267 .5 mm x 757 mm) Net W eight 60.85lbs (27 .6 kg) F eet Adjustment 0˚ to 2.8˚ P anel Resolution LCD Panel Sy stem 1 .8” TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 7 68 dots N[...]

78 Optional P arts The parts listed belo w are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer . Appendix L The specifications are subject to c hange without notice. L LCD panels are manufact ured to the highest possible st andards. Even though 99.99% of the pix els are ef f ective, a tin y f[...]

79 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Ground V ert. sync. DDC Cloc k 9 13 10 12 11 14 15 CONTROL POR T CONNECT O[...]

80 W rite down the PIN code number in the column below and k eep it with this manual securely . If y ou forgot or lost the number and unable to operate the projector , contact the ser vice st ation. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv alid[...]

81 Dimensions Unit: inc h (mm) Appendix 5.81(147.5) 20.87(530) 20.65(524.5) 108 Ň 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.5) 10.43(265) 10.89(276.5) 4.72(120) 8.27(210) 6.89(175) Screw Holes for Ceiling Mount Screw: M8 De[...]

KW7K Canada Christie Digital Systems Canada, Inc. 809 Wellington St. N. Kitc hener , Ont ario N2G 4Y7 PH: 51 9-7 44-8005 FX: 51 9-7 49-3321 Customer Ser vice: 1 -800-265-2171 sales-canada@c hristiedigital.com USA Christie Digital Systems USA, Inc. 1 0550 Camden Drive Cypress CA 90630 PH: 71 4-236-861 0 FX: 71 4-503-3375 Customer Ser vice: 1 -866-88[...]