Cino F790 manuel d'utilisation

International Edition Rev.A5 Serial Command Manual[...]

R evision History Rev . 01 April 1, 2013  Merged all the C MD Manua ls of different series into on e Manual  Added comm and TS A Op eration M ode  Flash, Force, T oggle, and Diagnostic Mode in T S Operation M ode are available f or L series from now on.  Change the param eter name of “ Inverse Reading” to “1D Barcode Inverse Readi[...]

© Copyright Cino Group © Copyright PC W orth In t’l Co., Ltd Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantabi lity and fitness f or any particular purpose. Cino shall not be liable f or errors contained herein or for incidental consequential damages in connect[...]

About Th is Guide Introduction Chapter Descriptions Notational Conventions Related Documents Command Ov erview …………………………… …………………… 1-1 Command Briefing ……………………………………………………. ……. 1-2 Command S tructure……………………………... ..............................[...]

Serial T rigger (ALL)…………………………………………………………. 2-19 S tore Configuration (ALL)………………………………………………....... 2-20 Factory Default (ALL).................................................................... ......... 2-21 Master Default (ALL)......................................[...]

Operation T ether Scan ner Series Set TS Operation, Get TS Operation, Reply TS Operation (TS)………… 2-101 Scan Engine Series Set SE Operation, Get SE Operat ion, Reply SE Operation (SE)………… 2-1 15 Fixed-mount Scanner S eries Set FS Operation, Get FS Operation, Rep ly FS Operation (FS)………… 2-125 Bluetooth Sc anner Serie s Set B[...]

About This Guide Introduction This guide provide s complete programming in formation about the serial c ommand of Cino FuzzyScan Scanne r & OEM Engine, w hich enable Scanner to communica te with a serial host through a virtual C OM port created. Chapter Descriptio ns Topics covered in thi s guide as follows: Chapter 1 Command Overview This chap[...]

Command Overview 1-1 This chapter prov ides a comprehensiv e view of the Fuzzy Scan Serial Command, includi ng:  C ommand Briefing  C ommand Struc ture This wil l help programmer to understand the command structure and each key elements of FuzzyScan Serial Commands. Chapter 1 Command Overvi ew[...]

Command Overview 1-2 1.1 Comman d Briefing The Fuzzy Scan Serial Commands prov ide a simple and ef fect ive w ay for serial host application to communi cate with Fuz zyScan device wi th ease. All commands hav e been categorized into several functional group s , includi ng “ Communication ”, “ D at a ”, “ Image ”, “ Action ”, “ Int[...]

Command Overview 1-3 （ Continued ） Functional Group Command Nam e Supported Scann er Message Source LED Indicator Bluetooth, T ethered Scanners Host Beeping All Series Scann ers Host Serial T rigger All Series Scann ers Host S tore Conf iguration A ll Series Scanners Host Factory Def ault All Series Scann ers Host Master Defau lt All Series Sca[...]

Command Overview 1-4 （ Continued ） 1.2 Comman d S tructure Packet Format The followi ng table shows the general p acket format of FuzzyS can Serial Command. Prefix Opcode St at us Length Parameter(s) Check Digit Suffix 1 Byte 3 Bytes 1 B yte 2 Bytes V ariable 1 Byte LRC or 2 Bytes CRC16 1 Byte Field Name Size Descriptions Prefix 1 Byte Fixed, ?[...]

Command Overview 1-5 All FuzzyScan Serial Commands begin and end with the fixed pref ix and suffix - 7Eh , which serve as p ar entheses . Betw een the prefix and the su ffix i s the com mand body . The main body consists of Opcode, S tatus, Length, Parameter(s) and check digit. According to the functional group, there are two different parameter fo[...]

Command Overview 1-6 Parameter Format Generally , there are tw o different p arameter formats , “Command with Sim ple Parameter(s)” and “Command w ith Compound Parameters ”. Commands with simple p arameters The Action, Ackno w ledgement , Data and Image commands belong to thi s group. 1) Action The parame ter filed of Action commands can be[...]

Command Overview 1-7 Commands with compound p arameters The Communication, Interface, Operation, T r ansmission, Sy mbolog y and Dev ice Info commands belong to this group. For better unde rstandin g of the command for mat, we divide these commands in to three types: Set, Get and R epl y 1) Set Set commands ar e used to configure the device sett in[...]

Command Overview 1-8 2) Get Get commands are used t o obtain the device setting. The parame ter f iel d can handle multiple parameters request a t the same ti m e. It means you are able to obtain multiple setting of device at same as well. It is a very useful f or application to reduce communication overhea d. Each parameter is composed of “PID?[...]

Command Descriptions 2-1 Chapter 2 Command Descri ptions[...]

Command Descriptions 2-2 2.1 Communica tion Get Connected M A C (BT) Descriptions Get the connected scan ners’ MAC addresses This command is used w hen working with the Sm artCradle in PICO mode. A vailable for F , L & A series Packet Format Prefix Op code St at us Length PID Size LRC Suffix 7Eh D6h FFh FFh 00h 00h 04h FFh 00h 00h 00h 2Dh 7Eh[...]

Command Descriptions 2-3 Reply Connec ted M A C (BT) Descriptions List all the connected s canners’ MAC addresses Reply Con nected MAC is sent by the dev ice in response to the Get Connected MA C command. A vailable for F , L & A series Packet Format Prefix Opcode Status Len gth Parameter LRC Suffix 7Eh 17h 00h 00h 00h V ariable (MAC List) V [...]

Command Descriptions 2-4 Get Paired M AC (BT) Descriptions Get all the pai red scanners’ MAC addresses This command is used w hen the working wi th the SmartCradle in P ICO mode. A vailable for F , L & A series Packet Format Prefix Op code St at us Length PID Size LRC Suffix 7Eh D6h FFh FFh 00h 00h 04h FFh 02h 00h 00h 2Fh 7Eh 1 Byte 3 Bytes 1[...]

Command Descriptions 2-5 Reply Paired M AC (BT) Descriptions List all the pai red scanners’ MAC addresses Reply Pai red MAC is sent by the device in respon se to the Get Paired M AC command. A vailable for F , L & A series Packet Format Prefix Opcode Status Len gth Parameter LRC Suffix 7Eh 17h 00h 00h 00h V ariable (MAC List) V ariable 7Eh 1 [...]

Command Descriptions 2-6 Select B y MAC (BT) Descriptions Use the MA C address to select the desired scann er to communicate This command is useful when multiple scanners are connected t o the SmartCradle in PI CO mode. Select By MAC is often preceded by a Get Connected MAC command t o provide a list from which the desired scanner w ill be selected[...]

Command Descriptions 2-7 Deselect B y MAC (BT) Descriptions Deselect the scanner by MAC This command is used to deselect the scanne r which is selected by command Select By M AC. Please note that once this command is processed successfully , the host will be able to receive the decode data from all t he connected scanners, but the subsequent serial[...]

Command Descriptions 2-8 Select B y ID (BT) Descriptions Use the auto-assi gned ID number to selec t the desired scanner to com municate This command is use ful whe n multiple scanners are connected to the SmartCradle in PIC O mode. Afterw ards, all the subsequent serial command wil l be send t o this selected scanner , and the other scanners wi ll[...]

Command Descriptions 2-9 Deselect B y ID (BT) Descriptions Deselect the scanner by ID This command is used to deselect the scanne r which is selected by command Select By ID . Please note that once this command is processed successfully , the host will be able to receive the decode data from all t he connected scanners, but the subsequent serial co[...]

Command Descriptions 2-10 2.2 Dat a Decode Dat a ( A LL) Descriptions Decoded Data in FSC pa cket format Decode Data is considered as an unexpected event since the decoded data wi ll be sent to the host whenever t he scanner scanned a barcode, either accidental ly or intentionally . The decoded data is sent in two types of format, either packed or [...]

Command Descriptions 2-1 1 T ransmit Recor d (WF) Descriptions T r ansmit all record(s) of Batch M ode A vailable for F & L series Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 1 1h 01h 00h 00h 00h <Null> 90h 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 0 Byte 1 Byte 1 B yte . Host Requiremen ts If the device succ essf[...]

Command Descriptions 2-12 2.3 Image Enter Capture Image Mod e (TS) Descriptions Enter Capture Ima ge Mode Once scanner is entered the Capture Image Mode, you can tr igger the scanner to capture image repeatedly , after ev ery i mage i s captured and r eady to be retrieved, scanne r w ill send out a Captu re Image R eady Notify packet to host, and t[...]

Command Descriptions 2-13 Exit Capture Image Mode (TS) Descriptions Exit Capture Image M ode A vailable for A series Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 1Ah 01h 00h 00h 00h <NULL> 9B 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 0 Byte 1 Byte 1 B yte . Host Requiremen ts If the de vice success fully rec eived the [...]

Command Descriptions 2-14 Capture Image Read y Noti fy (TS) Descriptions Capture image ready notify . W he n an ima ge is captured by scanner and ready to be retrieved by host, this command will be sent as a notification. A vailable for A series Packet Format Prefix Opcode St at us Length Parameter(s) LRC Suffix 7Eh 0Fh 1 Ah 00h 00h 00h 00h <Nul[...]

Command Descriptions 2-15 Get Capture I mage Dat a (TS) Descriptions Get the captured ima ge data. W he n in Capture Im age mode, scanner stores the image of the last t rigger automatically . T his command is used to get the latest i m age da ta. On receiving this co m mand, scanner wil l pack all the image data into several command p acket s and s[...]

Command Descriptions 2-16 Reply Format  Part 1 – First Im age Data Command Prefix Opcod e St atus Len gth Parameter CRC16 Suffix 7Eh 0Fh 1 Ah 02h 34h 10h 00h See Below V ariable 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 4096 Bytes 2 B ytes 1 Byte Parameter Image Width Image Height Image Size Image D ata 4 Bytes (Big Endian) 4 Bytes (Big Endian) 4 B[...]

Command Descriptions 2-17 2.4 Action LED Indicator (BT , TS) Descriptions Controls the LED indicat ors This co mmand turns on/of f or resto res one of the three LEDs, R ed LED , G reen LED, a nd Blue LED . Please note t hat LED Indicators can not be set to t he default value by F actory Default or Master Default. A vailable for Bluetooth F , L &[...]

Command Descriptions 2-18 Beeping ( A LL) Descriptions User programmable be eping control Once receiv ed the Beeping command, t he device wil l follow the desired beep sequence to sound the beeper . Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 01h 00h 00h 00h 40h See <T able 1-1> V ariable 7Eh 1 Byte 3 B ytes 1 B [...]

Command Descriptions 2-19 Serial T rigger ( ALL) Descriptions S tart or S t op a scan session W he n triggered on, the scanner attempt s to obt ain the requested data. W hen triggered off, the scanner abort s a decode attempt. Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 02h 00h 00h 00h 01h See <T able 1-2> V aria[...]

Command Descriptions 2-20 Sto re Confi guration ( A LL) Descriptions Save current settin gs into flash memory per manently Note that this command is not avai lable for storing the following settings: the beep sequence set by Beeping command; trigger status set by Serial T rigger command and LED status set by Indicator command. Packet Format Prefix [...]

Command Descriptions 2-21 Factor y Default (ALL) Descriptions Set all pa rameters to the factory default After sending this command, all parameters will be s et t o f actory default value. T hen the scanner resets all p arameters int o factory default values. For Bluetooth L & F Series: The radio link wi ll be disconnected and the scann er will[...]

Command Descriptions 2-22 Master Defaul t (ALL) Descriptions Set all pa rameters to the factory default except for the inter face settings The host interface related parameters still remain the same after performing the Master Default command. For Bluetooth L & F Series: Set all pa rameters to the factory default settings ex cept for the follow[...]

Command Descriptions 2-23 Securit y Check (ALL) Descriptions Host sends this co mmand to verify the connected scanner . Once the scanner receives this command, it will pass the 16-byte parameter data to the Security Script to generate a 16-byte result data and send it back as a r eply command to the host. If t he Security Script is disabl ed, the r[...]

Command Descriptions 2-24 BT Operatio n Mode (BT) Descriptions Select operation mode for Bluetooth Scanne r BT Opera tion Mode is equivalent to the Oper ation Mode Selection i n the Set BT Operation command. It is of mo re convenience to use BT Operation Mode of the Action Command Ca tegory . A vailable for F & L series Packet Format Prefix Opc[...]

Command Descriptions 2-25 BT A O perati on Mode (BT) Descriptions Select operation mode for Bluetooth Scanne r BT A O peration Mode is equivalent to t he Operation Mo de Selection in the Set BT Operation command. It i s of more c onvenience t o use BT A Operation M ode of t he Action C ommand Ca t egory . A vailable for A series Packet Format Prefi[...]

Command Descriptions 2-26 BT S y nchro nize (BT) Descriptions Synchroniz e BT scanner wi th SmartCradle If the BT scanner(s) are working with the SmartCradle in P AIR mode or PICO mode, this command is used to sync the Sc anner w ith the SmartCr adle, so that the ch anges o f the f ollowing six parameters will take ef fect instantly : “Handshakin[...]

Command Descriptions 2-27 FS T es t Mode (FS) Descriptions Set the Fixed M ount and Scan Module to T est Mode. Y ou may refer to “ Fuzz yScan Fixed Mount Scanner Programming Manual “or “ Fuzz yScan Fixed Mount Scanner Qui ck S tart Guide” f or mo re details about the T est Mode. A vailable for FM480, F A470, SM380 & SM 5700 series Packe[...]

Command Descriptions 2-28 FS Operation M ode (FS) Descriptions Select operation mode for Fixed M ount and Scan Mod ule FS Operation Mo de is equivalent to the Operation Mode Selection in the Set FS Operation command. It is of mo re convenience to use FS Operation Mode of the Action Command Ca tegory . A vailable for FM480 & SM 380 ser ies Packe[...]

Command Descriptions 2-29 FS A Operatio n Mode (FS) Descriptions Select operation mode for Fixed M ount and Scan Mod ule FS A Operation Mode i s equivale nt to t he Operation Mo de Selection in the Set FS O peration command. It i s o f mo re conv enience to use FS A Operation Mode of the Action Command Category . A vailable for F A470 & SM 5700[...]

Command Descriptions 2-30 SE Operatio n Mode (SE) Descriptions Select operation mode for Scan Engine SE Operation Mode i s equivale nt to the Ope ration M ode Selection i n t he Set SE Ope ration command. It is of mo re convenience to use SE Operation Mode of the Action Command Ca tegory . A vailable for SE380, SE390 & SE48 0 series Packet Form[...]

Command Descriptions 2-31 TS Operation M ode (TS) Descriptions Select operation mode for T ethe red Scanner TS Operation Mo de is equivalent to the Operation Mode Selection in the Set TS Operation command. It is of mo re convenience to use T S Operation M ode of t he Action Command Ca tegory . A vailable for F & L series Packet Format Prefix Op[...]

Command Descriptions 2-32 TS A Operatio n Mode (TS) Descriptions Select operation mode for T ethe red A Series Scanner TS A Operation Mode i s equivale nt to t he Operation Mo de Selection in the Set T S Operation command. It i s o f mo re conv enience to use TS A Operation Mode of the Action Command Category . A vailable for A series Packet Format[...]

Command Descriptions 2-33 Paging (WF) Descriptions Paging the scanner This command is help f ul for y ou to locate the conne cted Wi-Fi scanner . A vailable for F & L series Packet Format Prefix Opcode St at us Length Parameter(s) LRC Suffix 7Eh 80h 90h 01h 00h 00h 00h <Null> 5Ch 04h 7Eh 1 Byte 3 Bytes 1 Byte 2 B ytes 0 Byte 1 B yte 1 Byt[...]

Command Descriptions 2-34 Remote Indica tion (WF) Descriptions Send remote indica tion to the connected scanner A vailable for F & L series Packet Format Prefix Opcode St atus Leng th Parameter(s) LRC Suffix 7Eh 80h 90h 02h 00h 02h 00h See Next Pag e V ariable 7Eh 1 Byte 3 B ytes 1 B yte 2 Bytes 512 Bytes 1 B yte 1 B yte . Host Requiremen ts If[...]

Command Descriptions 2-35 Parameter(s) Size Parameter V al ue 2 Bytes Code Page 00h 00h 1 Byte Close 00h 1 Byte Message T y pe 07h Bit 4~7 Beeping T y pe - 0h Sho rt - 1h Long 1 Byte Bit 0~3 Number of Beep(s) - 0h Disabl e - 1h O nce - 2h 2 ti mes - 3h 3 ti mes - 5h 5 ti mes - 8h 8 ti mes - Ah 10 times Bit 4~7 V ibration Duration - 1h 100ms - 2h 20[...]

Command Descriptions 2-36 Remote Mes sage (WF) Descriptions Send remote messa ge to the connected scann er A vailable for F & L series Packet Format Prefix Opcode St atus Length Parameter(s) LRC Suffix 7Eh 80h 90h 02h 00h 02h 00h See Next Pag e V ariable 7Eh 1 Byte 3 B ytes 1 B yte 2 Bytes 512 Bytes 1 Byte 1 Byte . Host Requiremen ts If the de [...]

Command Descriptions 2-37 Parameter(s) Size Parameter V al ue 2 Bytes Code Page XXh XXh ( See Notes ) Bit 7 Manual Close - 0 Disable ( See Notes ) - 1 Enable 1 Byte Bit 0~6 A uto Close - 0h Disable( See Notes ) - 3h after 3 seconds - 5h after 5 seconds - 8h after 8 seconds - Ah after 10 seconds Lef t A lign Set Bit 7 to 1, Bit 6 to 0 Right A l ign [...]

Command Descriptions 2-38 . Notes 1. T he following Chart lists all available Code Pages and their 2-byte H ex value. 2. M anual Close and A uto Close can not be disable d at the sam e time. 3. M essage Length has at m ost three b ytes. If the fir st byte is 0xFF , the f ollowing t wo bytes represent the content length, for matted as High Byte Low [...]

Command Descriptions 2-39 Remote Clear (WF) Descriptions Clear the remote messa g e The scanner wi ll beep twice and vibrate for 100 millisecond s at t he sa me time. A vailable for F & L series Packet Format Prefix Opcode S tatus Length Parameter(s) LRC Suff ix 7Eh 80h 90h 02h 00h 02h 00h 00h 00h 00h 08h 00h 00h … 00h 18h 7Eh 1 Byte 3 B ytes[...]

Command Descriptions 2-40 Remote Lock (WF) Descriptions Send remote messa ge to the connected scann er Note that a locked scann er can not w ork until the Remote Unlock is call ed. A vailable for F & L series Packet Format Prefix Opcode St atus Length Parameter(s) LRC Suffix 7Eh 80h 90h 02h 00h 02h 00h See Next Pag e V ariable 7Eh 1 Byte 3 B yt[...]

Command Descriptions 2-41 Parameter(s) Size Parameter V al ue 2 Bytes Code Page XXh XXh ( See Notes ) 1 Byte Close 00h Lef t A lign Set Bit 7 to 1, Bit 6 to 0 Right A l ign Set Bit 7 to 0, Bit 6 to 1 Bit 7~6 Center A li gn Set both Bit 7 and Bi t 6 to 1 or 0 1 Byte Bit 5~0 Message T y pe - 5h Bit 4~7 Beeping T y pe - 0h Sho rt - 1h Long 1 Byte Bit [...]

Command Descriptions 2-42 . Notes 1. T he following Chart lists all available Code Pages and their 2-byte H ex value. 2. M anual Close and A uto Close can not be disable d at the sam e time. 3. M essage Length has at m ost three b ytes. If the fir st byte is 0xFF , the f ollowing t wo bytes represent the content length, for matted as High Byte Low [...]

Command Descriptions 2-43 Remote Unloc k (WF) Descriptions Send remote messa ge to the connected scann er The scanner wi ll beep twice and vibrate for 100 millisecond s at t he sa me time. A vailable for F & L series Packet Format Prefix Opcode S tatus Length Parameter(s) LRC Suff ix 7Eh 80h 90h 02h 00h 02h 00h 00h 00h 00h 5Ch 02h 00h 00h 00h 0[...]

Command Descriptions 2-44 Remote Progr amming (WF) Descriptions Enter or exit the Pro gramming Mode. W i- Fi scanner can only perform Remote Control c ommands when it is not in Programming mode. Remote Programming (Enter) is used to put scanner into programming mode, so that the subsequent p r ogramming commands will take ef fect. Please ref er to [...]

Command Descriptions 2-45 Remote Progr amming Ex tension (WF) Descriptions Enter remote program ming mode w ith user defined messa ge, beeps and v ibrat ion. W i- Fi scanner can only perform Remote Control c ommands when it is not in Programming mode. Remote Programming Extension (Enter) is used to put scanner into programming mode, so that the sub[...]

Command Descriptions 2-46 Parameter(s) Size Parameter V alue 2 Bytes Code Page XXh XXh ( See Notes ) Bit 7 Manual Close - 0 Disable ( See Notes ) - 1 Enable 1 Byte Bit 0~6 A uto Close - 0h Disable ( See No tes ) - 3h after 3 seconds - 5h after 5 seconds - 8h after 8 seconds - Ah after 10 seconds Lef t A lign Set Bit 7 to 1, Bit 6 to 0 Right A l ign[...]

Command Descriptions 2-47 . Notes 1. T he following Chart lists all available Code Pages and their 2-byte H ex value. 2. M anual Close and Auto Cl ose can not be disabled at the sam e time. And the y are available f or Exit Programmin g Mo de only . 3. M essage Length has at m ost three b ytes. If the fir st byte is 0xFF , the f ollowing t wo bytes[...]

Command Descriptions 2-48 Sync Date Time (WF) Descriptions Set Date T ime A vailable for F & L series Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 30h 00h 00h 00h 07h See Below V aria ble 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 7 Bytes 1 Byte 1 Byte . Host Requiremen ts If the de vice success fully rec eived the abo ve[...]

Command Descriptions 2-49 Delete Recor d (WF) Descriptions Delete all record(s) o f Batch Mode A vailable for F & L series Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 1 1h 00h 00h 00h 00h <Null> 91h 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 0 Byte 1 Byte 1 B yte . Host Requiremen ts If the de vice success fully re[...]

Command Descriptions 2-50 Send ST erm Dat a (WF) Descriptions This command is used to send S term Page Da ta wh en works with Wav eCentre. It is sent by the hos t application to the WaveCentre . A vailable for F & L series Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 80h 80h 00h 00h V ariable V ariable V ariabl e 7Eh 1 [...]

Command Descriptions 2-51 2.5 Interface Set USB COM (TS, SE, FM) Descriptions Change the desired one or more par ameters of the USB COM Interface settings A vailable f or F , L & A series; SE380, SE390 & SE480 series; FM480 & SM380 series; F A470 & SM5700 Series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7E[...]

Command Descriptions 2-52 Parameter(s) < T able 5-1-1 > Set USB COM Parameter(s ) Field Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Handshaking Protocol PID : 00h 01h Size : 00h 03h (3 Bytes) 1 st ~3 rd Byte - 00h 00h 00h - 00h 00h 01h - 00h 01h 00h None[...]

Command Descriptions 2-53 Get USB COM (TS, SE, FM) Descriptions Request the desired one or more pa rameters of the USB COM Interface settin gs A vailable f or F , L & A series; SE380, SE390 & SE480 series; FM480 & SM380 series; F A470 & SM5700 Series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C3h 00h 03[...]

Command Descriptions 2-54 Parameter(s) < T able 5-1-2 > Ge t USB COM Paramete r(s) Field Parameter PID Size STX/ETX T ransmission 00h 00h 00h 00h Handshaking Protocol 00h 01h 00h 00h Baud Rate 00h 02h 00h 00h Data Frame 00h 03h 00h 00h Serial Response Time-out 00h 04h 00h 00h ACK/N AK Retry Count 00h 05h 00h 00h ACK/N AK Indication 00h 06h 00[...]

Command Descriptions 2-55 Reply USB C OM (TS, SE, FM) Descriptions Reply the desired one or more para meters of the U SB COM Interface settings Reply USB COM is sent by the device in response to the Get USB COM command. It sends t he values for all the desired parameter s requested in the Get USB COM command. A vailable f or F , L & A series; S[...]

Command Descriptions 2-56 Parameter(s) < T able 5-1-3 > Reply U SB COM Parameter (s) Field Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Handshaking Protocol PID : 00h 01h Size : 00h 03h (3 Bytes) 1 st ~3 rd Byte - 00h 00h 00h - 00h 00h 01h - 00h 01h 00h N[...]

Command Descriptions 2-57 Set RS232 (TS , SE, FM) Descriptions Change the desired one or more par ameters of the RS232 In terface settings A vailable f or F , L & A series; SE380, SE390 & SE480 series; FM480 & SM380 series; F A470 & SM5700 Series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 82h 00h 00h 00[...]

Command Descriptions 2-58 Parameter(s) < T able 5-2-1 > Set RS2 32 Parameter(s) Fie ld Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Handshaking Protocol PID : 00h 01h Size : 00h 03h (3 Bytes) 1 st ~3 rd Byte - 00h 00h 00h - 01h 00h 00h - 00h 00h 01h - 00h[...]

Command Descriptions 2-59 Get RS232 (TS, SE, FM) Descriptions Request the desired one or more pa rameters of the RS23 2 Interface settings A vailable f or F , L & A series; SE380, SE390 & SE480 series; FM480 & SM380 series; F A470 & SM5700 Series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C3h 00h 00h 00[...]

Command Descriptions 2-60 Parameter(s) < T able 5-2-2 > Ge t RS232 Parameter (s) Field Parameter PID Size STX/ETX T ransmission 00h 00h 00h 00h Handshaking Protocol 00h 01h 00h 00h Baud Rate 00h 02h 00h 00h Data Frame 00h 03h 00h 00h Serial Response Time-out 00h 04h 00h 00h ACK/N AK Retry Count 00h 05h 00h 00h ACK/N AK Indication 00h 06h 00h [...]

Command Descriptions 2-61 Reply RS232 (TS, SE, FM) Descriptions Reply RS 232 Interface Settings Reply RS232 is sent by the device in response to the Get RS232 command. It sends the values for all the desired pa r ameters requested in the Get RS232 command. A vailable f or F , L & A series; SE380, SE390 & SE480 series; FM480 & SM380 seri[...]

Command Descriptions 2-62 Parameter(s) < T able 5-2-3 > Reply R S232 Parameter(s) F ield Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Handshaking Protocol PID : 00h 01h Size : 00h 03h (3 Bytes) 1 st ~3 rd Byte - 00h 00h 00h - 01h 00h 00h - 00h 00h 01h - 0[...]

Command Descriptions 2-63 Set USB COM (BT) Descriptions Change the desired one or more par ameters of the USB COM Interface settings A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 82h 00h 03h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Pa[...]

Command Descriptions 2-64 Parameter(s) < T able 5-3-1 > Set USB COM Parameter(s ) Field Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Baud Rate PID : 00h 02h Size : 00h 01h (1 Byte) - 02h - 03h - 04h - 05h - 06h - 07h - 08h - 09h 1200 BPS 2400 BPS 4800 BPS[...]

Command Descriptions 2-65 Get USB COM (BT) Descriptions Request the desired one or more pa rameters of the USB COM Interface settin gs A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C3h 00h 03h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte [...]

Command Descriptions 2-66 Parameter(s) < T able 5-3-2 > Ge t USB COM Paramete r(s) Field Parameter PID Size STX/ETX T ransmission 00h 00h 00h 00h Baud Rate 00h 02h 00h 00h Data Frame 00h 03h 00h 00h[...]

Command Descriptions 2-67 Reply USB C OM (BT) Descriptions Reply the desired one or more para meters of the U SB COM Interface settings Reply USB COM is sent by the device in response to the Get USB COM command. It sends t he values for all the desired parameter s requested in the Get USB COM command. A vailable for F , L & A series Packet Form[...]

Command Descriptions 2-68 Parameter(s) < T able 5-3-3 > Reply U SB COM Parameter (s) Field Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Baud Rate PID : 00h 02h Size : 00h 01h (1 Byte) - 02h - 03h - 04h - 05h - 06h - 07h - 08h - 09h 1200 BPS 2400 BPS 4800 [...]

Command Descriptions 2-69 Set RS232 (BT) Descriptions Change the desired one or more par ameters of the RS232 In terface settings A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 82h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Param[...]

Command Descriptions 2-70 Parameter(s) < T able 5-4-1 > Set RS2 32 Parameter(s) Fie ld Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Handshaking Protocol PID : 00h 01h Size : 00h 03h (3 Bytes) 1 st ~3 rd Byte - 00h 00h 00h - 01h 00h 00h - 00h 00h 01h - 00h[...]

Command Descriptions 2-71 Get RS232 (BT) Descriptions Request the desired one or more pa rameters of the RS23 2 Interface settings A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C3h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Para[...]

Command Descriptions 2-72 Parameter(s) < T able 5-4-2 > Ge t RS232 Parameter (s) Field Parameter PID Size STX/ETX T ransmission 00h 00h 00h 00h Handshaking Protocol 00h 01h 00h 00h Baud Rate 00h 02h 00h 00h Data Frame 00h 03h 00h 00h Serial Response Time-out 00h 04h 00h 00h ACK/N AK Retry Count 00h 05h 00h 00h ACK/N AK Indication 00h 06h 00h [...]

Command Descriptions 2-73 Reply RS232 (BT) Descriptions Reply RS 232 Interface Settings Reply RS232 is sent by the device in response to the Get RS232 command. It sends the values for all the desired pa r ameters requested in the Get RS232 command. A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suf[...]

Command Descriptions 2-74 Parameter(s) < T able 5-4-3 > Reply R S232 Parameter(s) F ield Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Handshaking Protocol PID : 00h 01h Size : 00h 03h (3 Bytes) 1 st ~3 rd Byte - 00h 00h 00h - 01h 00h 00h - 00h 00h 01h - 0[...]

Command Descriptions 2-75 Set Bluetoot h (BT) Descriptions Change the desired one or more par ameters of the Bluetooth settings A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 98h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Paramet[...]

Command Descriptions 2-76 Parameter(s) < T able 5-5-1 > Set B luetooth Parameter(s ) Field Parameter / PID / Size Options Descript ions Bluetooth Dev ice Name (F & L Series) PID : 00h 00h Size : 00h 1 1h (17 B ytes) - 00h FF h… FFh (sixteen “FFh”s ) - XXh X Xh…XXh Default * (For ex ample: F680BT -012E) User defined ( See Notes) Bl[...]

Command Descriptions 2-77 Parameter(s) < T able 5-5-1 > Set B luetooth Parameter(s ) Field Parameter / PID / Size Options Descript ions Auto Power Off Timeout PID : 00h 08h Size : 00h 01h (1 Byte) - 06h - 00h~0Ch (See Notes) 6 (x5) m inutes * User defined 0 ~12 (x5) m inutes Bluetooth Dev ice Name (A Series) PID : 00h 09h Size : 00h 21h (33 B[...]

Command Descriptions 2-78 Get Bluetooth (BT) Descriptions Request the desired one or more pa rameters of the Blue tooth Settings A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh D9h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parame[...]

Command Descriptions 2-79 Parameter(s) < T able 5-5-2 > Ge t Bluetooth Parameter(s) Field Parameter PID Size Bluetooth Dev ice Name ( F & L Series) 00h 00h 00h 00h Bluetooth PIN Cod e 00h 01h 00h 00h BT A ut hentication 00h 02h 00h 00h Sleep Timeout C ontrol 00h 03h 00h 00h Link Superv ision Timeout 00h 04h 00h 00h HID Link Qual ity Setti[...]

Command Descriptions 2-80 Reply Bluetoo th (BT) Descriptions Reply the desired one or more para meters of the B luetooth Settings Reply Bluetooth is sent by t he device in response t o t he G et Bluetooth command. It sends the values for all the desired parameter s requested in the Get Bluetooth command. A vailable for F , L & A series Packet F[...]

Command Descriptions 2-81 Parameter(s) < T able 5-5-3 > Reply Bluetooth Parame ter(s) Field Parameter / PID / Size Options Descript ions Bluetooth Dev ice Name (F & L Series) PID : 00h 00h Size : 00h 1 1h (17 B ytes) - 00h FF h… FFh (sixteen “FFh”s ) - XXh X Xh…XXh Default * (For ex ample: F680BT -012E) User defined ( See Notes) B[...]

Command Descriptions 2-82 Parameter(s) < T able 5-5-3 > Reply Bluetooth Parame ter(s) Field Parameter / PID / Size Options Descript ions Auto Power Off Timeout PID : 00h 08h Size : 00h 01h (1 Byte) - 06h - 00h~0Ch (See Notes) 6 (x5) m inutes * User defined 0 ~12 (x5) m inutes Bluetooth Dev ice Name (A Series) PID : 00h 09h Size : 00h 21h (33 [...]

Command Descriptions 2-83 Set USB HID (WF) Descriptions Change the desired one or more par ameters of the USB HID Interface settings A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 82h 00h 02h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parame[...]

Command Descriptions 2-84 Parameter(s) < T able 5-6-1 > Set USB HID Parameter(s ) Field Parameter / PID / Size Options Descript ions Keyboard La yout PID : 00h 01h Size : 00h 01h (1 Byte) - 00h - 03h - 04h - 07h - 0Bh - 0Ah - 02h - 0Ch - 09h - 0Dh - 05h - 0Eh - 08h - 01h - 06h - 0Fh - 10h - 1 1h - 62h USA (QW ERTY) * France (AZERT Y) German y[...]

Command Descriptions 2-85 Get USB HID (WF) Descriptions Request the desired one or more pa rameters of the USB HID Interface settings A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C3h 00h 02h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Param[...]

Command Descriptions 2-86 Parameter(s) < T able 5-6-2 > Ge t USB HID Paramete r(s) Field Parameter PID Size Keyboard La yout 00h 01h 00h 00h Caps Lock Release 00h 02h 00h 00h Caps Lock 00h 03h 00h 00h Function Ke y Emulation 00h 04h 00h 00h Key Pad Emulatio n 00h 05h 00h 00h Upper/Low er Case 00h 06h 00h 00h[...]

Command Descriptions 2-87 Reply USB HID (WF) Descriptions Reply US B HID Interface Settings Reply USB HID is sent by t he device in re sponse t o the Get USB H ID co mmand. It sends the v alues for all the desired p arameters re quested in the Get USB HID command. A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Paramete[...]

Command Descriptions 2-88 Parameter(s) < T able 5-6-3 > Reply U SB HID Parameter(s) Field Parameter / PID / Size Options Descript ions Keyboard La yout PID : 00h 01h Size : 00h 01h (1 Byte) - 00h - 03h - 04h - 07h - 0Bh - 0Ah - 02h - 0Ch - 09h - 0Dh - 05h - 0Eh - 08h - 01h - 06h - 0Fh - 10h - 1 1h - 62h USA (QW ERTY) * France (AZERT Y) German[...]

Command Descriptions 2-89 Set USB COM (WF) Descriptions Change the desired one or more par ameters of the USB COM Interface settings A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 82h 00h 03h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parame[...]

Command Descriptions 2-90 Parameter(s) < T able 5-7-1 > Set USB COM Parameter(s ) Field Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Baud Rate PID : 00h 02h Size : 00h 01h (1 Byte) - 02h - 03h - 04h - 05h - 06h - 07h - 08h - 09h 1200 BPS 2400 BPS 4800 BPS[...]

Command Descriptions 2-91 Get USB COM (WF) Descriptions Request the desired one or more pa rameters of the USB COM Interface settin gs A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C3h 00h 03h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Para[...]

Command Descriptions 2-92 Parameter(s) < T able 5-7-2 > Ge t USB COM Paramete r(s) Field Parameter PID Size STX/ETX T ransmission 00h 00h 00h 00h Baud Rate 00h 02h 00h 00h Data Frame 00h 03h 00h 00h[...]

Command Descriptions 2-93 Reply USB C OM (WF) Descriptions Reply the desired one or more para meters of the U SB COM Interface settings Reply USB COM is sent by the device in response to the Get USB COM command. It sends t he values for all the desired parameter s requested in the Get USB COM command. A vailable for F & L series Packet Format P[...]

Command Descriptions 2-94 Parameter(s) < T able 5-7-3 > Reply U SB COM Parameter (s) Field Parameter / PID / Size Options Descript ions STX/ETX T ransmission PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Baud Rate PID : 00h 02h Size : 00h 01h (1 Byte) - 02h - 03h - 04h - 05h - 06h - 07h - 08h - 09h 1200 BPS 2400 BPS 4800 [...]

Command Descriptions 2-95 Set Wi-Fi (WF) Descriptions Change the desired one or more par ameters of the W i-Fi set tings A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 9Bh 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parameter(s) First[...]

Command Descriptions 2-96 Parameter(s) < T able 5-8-1 > Set W i-Fi Paramete r(s) Field Parameter / PID / Size Options Descript ions Sleep Timeout C ontrol PID : 00h 14h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 06h - XXh 2 nd Byte - 00h - 05h - XXh Sleep Timeout o f Connect State Never enter s leep mode 6 (x5) m inutes * User defined 0 ~99 ([...]

Command Descriptions 2-97 Get Wi-Fi (WF) Descriptions Request the desired one or more pa rameters of the W i-Fi set tings A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh DCh 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parameter(s) Firs[...]

Command Descriptions 2-98 Parameter(s) < T able 5-8-2 > Ge t Wi-Fi Paramete r(s) Field Parameter PID Size Wi-Fi M A C A ddress 00h 0Ch 00h 00h Sleep Timeout C ontrol 00h 14h 00h 00h Keep A live Timeout 00h 15h 00h 00h Reconnect Inte rval 00h 16h 00h 00h Power Saving M ode 00h 17h 00h 00h COM Port V alidation 01h 00h 00h 00h[...]

Command Descriptions 2-99 Reply Wi-Fi (WF) Descriptions Reply the desired one or more para meters of the Wi-Fi Interface settings Reply Wi-Fi is sent by t he device in response t o the G et Wi-Fi command. It sends the values for all the desired pa rameters reques ted in the Get W i-Fi command. A vailable for F & L series Packet Format Prefix Op[...]

Command Descriptions 2-100 Parameter(s) < T able 5-8-3 > Reply Wi-Fi Parameter(s) Field Parameter / PID / Size Options Descript ions Wi-Fi M A C A ddress PID : 00h 0Ch Size : 00h 06h (6 Bytes) 1 st Byte - XXh 2 nd Byte - XXh 3 rd Byte - XXh 4 th Byte - XXh 5 th Byte - XXh 6 th Byte - XXh The 6th n umber of M AC Address User defined X X The 5t[...]

Command Descriptions 2-101 2.6 Operatio n Set TS Opera tion (TS) Descriptions Change the desired one or more par ameters of the Operation Se ttings for T ethered Scanne r A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 88h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 By[...]

Command Descriptions 2-102 Parameter(s) < T able 6-1-1 > Set TS Operation Parame ter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Presentation Control PID : 00h 01h Size : 00h 01h (1 Byte) - 01h - 02h - 08h Force m ode Presentation m ode * Flash mode (Se e Notes) Presentation A ut o-sense PID : 00h 02h Size : 00h [...]

Command Descriptions 2-103 Parameter(s) < T able 6-1-1 > Set TS Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions T rigger Cont rol(F460/468 only) PID : 00h 0 Ah Size : 00h 01h (2 Bytes) - 00h - 01h - 02h Enable left trigger , d isable right trigger Enable right tri gger , disab le left trigger Enable lef[...]

Command Descriptions 2-104 Parameter(s) < T able 6-1-1 > Set TS Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Data T ransmis sion Packe t PID : 02h 04h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable UPC/E AN Security Level PID : 02h 06h Size : 00h 01h (1 Byte) - 00h - 01h - 02h Level 0 Level 1 *[...]

Command Descriptions 2-105 Parameter(s) < T able 6-1-1 > Set TS Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Operation M ode (T et hered A Seri es) PID : 70h 00h Size : 00h 03h (3 Bytes) - 00h 01h 01h - 01h 01h 01h - 02h 01h 01h - 04h 01h 00h - 05h 01h 01h - 06h 01h 00h - 07h 01h 00h - 09h 01h 01h - [...]

Command Descriptions 2-106 Parameter(s) < T able 6-1-1 > Set TS Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Mobile Phone Capt ure PID : 70h 07h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Unique Barcode R eportin g PID : 70h 08h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable[...]

Command Descriptions 2-107 Get TS Opera tion (TS) Descriptions Request the desired one or more pa rameters of the Operation Se t tings for T ethered Scanner A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C9h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V a[...]

Command Descriptions 2-108 Parameter(s) < T able 6-1-2 > Ge t TS Operation Parameter(s) Field Parameter PID Size Presentation Control 00h 01h 00h 00h Presentation A ut o-sense 00h 02h 00h 00h Presentation Sensitivity 00h 03h 00h 00h Reread Dela y 00h 04h 00h 00h Flash Dut y Cycle 00h 05h 00h 00h Good Read Del ay 00h 06h 00h 00h Light Source O[...]

Command Descriptions 2-109 Reply TS Opera tion (TS) Descriptions Reply the desired one or more para meters of the Opera tion Settings for T e thered Scanner Reply T S Operation is sent by the device in response to the Get TS O per ation command. It sends the values for all the desi r ed pa rameters requested in the Get TS Operation command. A vaila[...]

Command Descriptions 2-1 1 0 Parameter(s) < T able 6-1-3 > Reply TS Operation Parameter (s) Field (T o be continued ) Parameter / PID / Size Options Descript ions Presentation Control PID : 00h 01h Size : 00h 01h (1 Byte) - 01h - 02h - 08h Force m ode Presentation m ode * Flash mode (Se e Notes) Presentation A ut o-sense PID : 00h 02h Size : [...]

Command Descriptions 2-1 1 1 Parameter(s) < T able 6-1-3 > Reply TS Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions T rigger Cont rol(F460/468 only) PID : 00h 0 Ah Size : 00h 01h (2 Bytes) - 00h - 01h - 02h Enable left trigger , d isable right trigger Enable right tri gger , disab le left trigger Enable [...]

Command Descriptions 2-1 1 2 Parameter(s) < T able 6-1-3 > Reply TS Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Data T ransmis sion Packe t PID : 02h 04h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable UPC/E AN Security Level PID : 02h 06h Size : 00h 01h (1 Byte) - 00h - 01h - 02h Level 0 Level [...]

Command Descriptions 2-1 1 3 Parameter(s) < T able 6-1-3 > Reply TS Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Operation M ode (T et hered A Seri es) PID : 70h 00h Size : 00h 03h (3 Bytes) - 00h 01h 01h - 01h 01h 01h - 02h 01h 01h - 04h 01h 00h - 05h 01h 01h - 06h 01h 00h - 07h 01h 00h - 09h 01h 01h[...]

Command Descriptions 2-1 1 4 Parameter(s) < T able 6-1-3 > Reply TS Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Mobile Phone Capt ure PID : 70h 07h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Unique Barcode R eportin g PID : 70h 08h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable[...]

Command Descriptions 2-1 1 5 Set SE Operati on (SE) Descriptions Change the desired one or more par ameters of the Operation Se ttings for Scan Engine A vailable for SE380, SE390 & SE48 0 series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 88h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Byt[...]

Command Descriptions 2-1 1 6 Parameter(s) < T able 6-2-1 > Set SE Operation Parame ter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Presentation Sensitivity PID : 00h 03h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h - 05h - 06h Level 1 Level 2 Level 3 Level 4 Level 5 * Level 6 Level 7 Reread Dela y PID : [...]

Command Descriptions 2-1 1 7 Parameter(s) < T able 6-2-1 > Set SE Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Good Read Dur ation PID : 01h 04h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h Short Medium * Long Extrem ely long Extrem ely short Good Read Indicat or PID : 01h 05h Size : 00h 01h[...]

Command Descriptions 2-1 1 8 Parameter(s) < T able 6-2-1 > Set SE Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Laser A i ming Contro l PID : 02h 09h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * LED Illuminatio n PID : 02h 0Bh Size : 00h 01h (1 Byte) - 00h - 01h (See Note) Always on Intelligen[...]

Command Descriptions 2-1 1 9 Get SE Operati on (SE) Descriptions Request the desired one or more pa rameters of the Operation Se t tings for Scan Engine A vailable for SE380, SE390 & SE48 0 series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C9h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 B[...]

Command Descriptions 2-120 Parameter(s) < T able 6-2-2 > Ge t SE Operation Parame ter(s) Field Parameter PID Size Presentation Sensitivity 00h 03h 00h 00h Reread Dela y 00h 04h 00h 00h Good Read Del ay 00h 06h 00h 00h Scan Input T ime-out 00h 07h 00h 00h Hands Free Time-o ut 00h 08h 00h 00h Time Delay T o Low Pow er Mode 00h 09h 00h 00h Scan [...]

Command Descriptions 2-121 Reply SE Opera tion (SE) Descriptions Reply the desired one or more para meters of the Opera tion Settings for S can Engine Reply SE O peration is sent by the device in response to the Get SE Operation command. It sends the values for all the desi r ed pa rameters requested in the Get SE Operation command . A vailable for[...]

Command Descriptions 2-122 Parameter(s) < T able 6-2-3 > Reply S E Operation Parameter (s) Field (T o be continue d) Parameter / PID / Size Options Descript ions Presentation Sensitivity PID : 00h 03h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h - 05h - 06h Level 1 Level 2 Level 3 Level 4 Level 5 * Level 6 Level 7 Reread Dela y PID :[...]

Command Descriptions 2-123 Parameter(s) < T able 6-2-3 > Reply S E Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Power on beep PID : 01h 01h Size : 00h 01h (1 Byte) - 00h - 01h Enable (SE38 0/SE388-9 *) Disable (SE380/ SE388-0, SE380/SE388- 1 *) Good Read Dur ation PID : 01h 04h Size : 00h 01h (1 Byte)[...]

Command Descriptions 2-124 Parameter(s) < T able 6-2-3 > Reply S E Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Laser A i ming Contro l PID : 02h 09h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * LED Illuminatio n PID : 02h 0Bh Size : 00h 01h (1 Byte) - 00h - 01h Always on Intelligent Sc anning[...]

Command Descriptions 2-125 Set FS Opera tion (FS) Descriptions Change the desired one or more parameters of the Operation Settings for Fixed Mount and Scan Module A vailable for FM480, F A470, SM380 & SM 5700 series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 88h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte [...]

Command Descriptions 2-126 Parameter(s) < T able 6-3-1 > Set FS Operation Parame ter(s) Field (T o be cont inued) Parameter / PID / Size Options Descriptions Presentation Sensitivity PID : 00h 03h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h - 05h - 06h Level 1 Level 2 Level 3 Level 4 Level 5 * Level 6 Level 7 Reread Dela y PID : 00h[...]

Command Descriptions 2-127 Parameter(s) < T able 6-3-1 > Set FS Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descriptions 1D Barcode Inv erse Read ing PID : 02h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Dollar Sign Cont rol PID : 02h 01h Size : 00h 01h (1 Byte) - 00h - 80h - A2h - A3h - A5h Output a[...]

Command Descriptions 2-128 Parameter(s) < T able 5-3 > Set FS Operation Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions OK/NG A ctive Signa l Cont rol PID : 20h 01h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h - 02h - 03h 2 nd Byte - 00h - 01h - 02h - 03h 3 rd Byte - 01h - 02h - 03h - 04h - 05h - 06h - 07h - 08h [...]

Command Descriptions 2-129 Parameter(s) < T able 5-3 > Set FS Operation Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Operation M ode (F A470 & SM 5700 series) PID : 70h 00h Size : 00h 03h (3 Bytes) - 00h 01h 01h - 01h 01h 01h - 02h 01h 01h - 04h 01h 00h - 06h 01h 00h (See Notes) Trigger mode * Force m ode Pr[...]

Command Descriptions 2-130 Get FS Opera tion (FS) Descriptions Request the desired one or more parameters of the Operation Settings for Fixed Mount and Scan Module A vailable for FM480, F A470, SM380 & SM 5700 series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C9h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte[...]

Command Descriptions 2-131 Parameter(s) < T able 6-3-2 > Ge t FS Operation Parameter(s) Field Parameter PID Size Presentation Sensitivity 00h 03h 00h 00h Reread Dela y 0 0h 04h 00h 00h Good Read Del ay 00h 06h 00h 00h Hands Free Time-o ut 00h 08h 00h 00h Scan Rate Control 00h 0Bh 00h 00h Buzzer T one A d just 01h 00h 00h 00h Power on beep 01h[...]

Command Descriptions 2-132 Reply FS Opera tion (FS) Descriptions Reply the desired one or more parameters of t he O peration Settin gs for Fixed Mount and Scan Module Reply FS O peration is sent by the device in response to the Get FS O peration command. It sends the values for all the desi r ed pa rameters requested in the Get FS Operation command[...]

Command Descriptions 2-133 Parameter(s) < T able 6-3-3 > Reply F S Operation Parameter (s) Field (T o be continued ) Parameter / PID / Size Options Descriptions Presentation Sensitivity PID : 00h 03h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h - 05h - 06h Level 1 Level 2 Level 3 Level 4 Level 5 * Level 6 Level 7 Reread Dela y PID : [...]

Command Descriptions 2-134 Parameter(s) < T able 6-3-3 > Reply F S Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descriptions 1D Barcode Inv erse Read ing PID : 02h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Dollar Sign Cont rol PID : 02h 01h Size : 00h 01h (1 Byte) - 00h - 80h - A2h - A3h - A5h Output[...]

Command Descriptions 2-135 Parameter(s) < T able 6-3-3 > Reply F S Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions OK/NG A ctive Signa l Cont rol PID : 20h 01h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h - 02h - 03h 2 nd Byte - 00h - 01h - 02h - 03h 3 rd Byte - 01h - 02h - 03h - 04h - 05h - 06h - 07h [...]

Command Descriptions 2-136 Parameter(s) < T able 6-3-3 > Reply F S Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Operation M ode (F A470 & SM 5700 series) PID : 70h 00h Size : 00h 03h (3 Bytes) - 00h 01h 01h - 01h 01h 01h - 02h 01h 01h - 04h 01h 00h - 06h 01h 00h (See Notes) Trigger mode * Force m [...]

Command Descriptions 2-137 Set BT Operati on (BT) Descriptions Change the desired one or more par ameters of the Operation Se ttings for Bluetooth Scanne r A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 88h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ar[...]

Command Descriptions 2-138 Parameter(s) < T able 6-4-1 > Set BT Operation Parame ter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Presentation A ut o-sense PID : 00h 02h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Presentation Sensitivity PID : 00h 03h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h[...]

Command Descriptions 2-139 Parameter(s) < T able 6-4-1 > Set BT Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Power on Ind ication PID : 01h 02h Size : 00h 01h (1 Byte) - 00h - 01h - 02h LED Off LED On * LED Flash Vibrator PID : 01h 03h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Good Read Du[...]

Command Descriptions 2-140 Parameter(s) < T able 6-4-1 > Set BT Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions UPC/E AN Security Level PID : 02h 06h Size : 00h 01h (1 Byte) - 00h - 01h - 02h Level 0 Level 1 * Level 2 Supplement Scan V otin g PID : 02h 08h Size : 00h 01h (1 Byte) - 00h - 06h - 08h - 0Ah[...]

Command Descriptions 2-141 Parameter(s) < T able 6-4-1 > Set BT Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Laser A i ming Contro l PID : 02h 09h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * LED Illuminatio n PID : 02h 0Bh Size : 00h 01h (1 Byte) - 00h - 01h Always on Intelligent Sc anning *[...]

Command Descriptions 2-142 Parameter(s) < T able 6-1-1 > Set BT Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Delay A i ming Timeout Control PID : 70h 04h Size : 00h 01h (1 Byte) - 02h - 04h - 08h - 0Ah - 0Fh - 14h - 1Eh - 28h 200ms 400ms * 800ms 1000ms 1500ms 2000ms 3000ms 4000ms Presentation Backgro[...]

Command Descriptions 2-143 Get BT Oper ation (BT) Descriptions Request the desired one or more pa rameters of the Operation Se t tings for Bl uetooth Scanner A vailable for F , L & A series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C9h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V [...]

Command Descriptions 2-144 Parameter(s) < T able 6-4-2 > Ge t BT Operation Parame ter(s) Field Parameter PID Size Presentation A ut o-sense 00h 02h 00h 00h Presentation Sensitivity 00h 03h 00h 00h Reread Dela y 0 0h 04h 00h 00h Good Read Del ay 00h 06h 00h 00h Light Source On Tim e 00h 07h 00h 00h Hands Free Time-o ut 00h 08h 00h 00h Time Del[...]

Command Descriptions 2-145 Reply BT Opera tion (BT) Descriptions Reply the desired one or more para meters of the Opera tion Settings for Bluetooth Scanner Reply BT O peration is sent by the device in response t o the Get BT Operation command. It sends the values for all the desi r ed pa rameters requested in the Get BT Operation command. A vailabl[...]

Command Descriptions 2-146 Parameter(s) < T able 6-4-3 > Reply B T Operation Paramete r(s) Field (T o be continue d) Parameter / PID / Size Options Descript ions Presentation A ut o-sense PID : 00h 02h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Presentation Sensitivity PID : 00h 03h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - [...]

Command Descriptions 2-147 Parameter(s) < T able 6-4-3 > Reply B T Operation Paramete r(s) Field (Continued) Parameter / PID / Size Options Descript ions Power on Ind ication PID : 01h 02h Size : 00h 01h (1 Byte) - 00h - 01h - 02h LED Off LED On * LED Flash Vibrator PID : 01h 03h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Good Read [...]

Command Descriptions 2-148 Parameter(s) < T able 6-4-3 > Reply B T Operation Paramete r(s) Field (Continued) Parameter / PID / Size Options Descript ions UPC/E AN Security Level PID : 02h 06h Size : 00h 01h (1 Byte) - 00h - 01h - 02h Level 0 Level 1 * Level 2 Supplement Scan V otin g PID : 02h 08h Size : 00h 01h (1 Byte) - 00h - 06h - 08h - 0[...]

Command Descriptions 2-149 Parameter(s) < T able 6-4-3 > Reply B T Operation Paramete r(s) Field (Continued) Parameter / PID / Size Options Descript ions Laser A i ming Contro l PID : 02h 09h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * LED Illuminatio n PID : 02h 0Bh Size : 00h 01h (1 Byte) - 00h - 01h Always on Intelligent Sc anning[...]

Command Descriptions 2-150 Parameter(s) < T able 6-1-1 > Set BT Operation Parame ter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Delay A i ming Timeout Control PID : 70h 04h Size : 00h 01h (1 Byte) - 02h - 04h - 08h - 0Ah - 0Fh - 14h - 1Eh - 28h 200ms 400ms * 800ms 1000ms 1500ms 2000ms 3000ms 4000ms Presentation Backgro[...]

Command Descriptions 2-151 Set WF Opera tion (WF) Descriptions Change the desired one or more par ameters of the Operation Se ttings for Wi-Fi Scanner . A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 88h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1[...]

Command Descriptions 2-152 Parameter(s) < T able 6-5-1 > Set WF Operation Parameter (s) Field (T o be continued ) Parameter / PID / Size Options Descript ions Power Saving T imeout PID : 00h 09h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h - 05h 1 second 5 seconds * 10 seconds 20 seconds 30 seconds Immediatel y Buzzer T one A d just [...]

Command Descriptions 2-153 Parameter(s) < T able 6-5-1 > Set WF Operation Parameter (s) Field (Continued) Parameter / PID / Size Options Descript ions Beeping Control PID : 01h 06h Size : 00h 01h (1 Byte) Bit 0 - 0 - 1 Bit 1 - 0 - 1 Radio Connection Beep Enable * Disable Battery Pow er Low Beep Enable * Disable Scan Rate Control PID : 00h 0Bh[...]

Command Descriptions 2-154 Get WF Operat ion (WF) Descriptions Request the desired one or more pa rameters of the Operation Se t tings for W i-Fi Scanner A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C9h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable [...]

Command Descriptions 2-155 Parameter(s) < T able 6-5-2 > Ge t WF Operation Parame ter(s) Field Parameter PID Size Power Saving T imeout 00h 09h 00h 00h Buzzer T one A d just 01h 00h 00h 00h Power on beep 01h 01h 00h 00h Power on Ind ication 01h 02h 00h 00h Vibrator 01h 03h 00h 00h 1D Barcode Inv erse Read ing 02h 00h 00h 00h Dollar Sign Cont [...]

Command Descriptions 2-156 Reply WF Oper ation (WF) Descriptions Reply the desired one or more para meters of the Opera tion Settings for W i-Fi Scanner Reply W F Operation is sent by the device in response to the Get WF Operation command. It sends the values for all the desi r ed pa rameters requested in the Get WF Operation com mand. A vailable f[...]

Command Descriptions 2-157 Parameter(s) < T able 6-5-3 > Reply WF Operation Para meter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Power Saving T imeout PID : 00h 09h Size : 00h 01h (1 Byte) - 00h - 01h - 02h - 03h - 04h - 05h 1 second 5 seconds * 10 seconds 20 seconds 30 seconds Immediatel y Buzzer T one A d jus[...]

Command Descriptions 2-158 Parameter(s) < T able 6-5-3 > Reply WF Operation Para meter(s) Field (Continued ) Parameter / PID / Size Options Descript ions Beeping Control PID : 01h 06h Size : 00h 01h (1 Byte) Bit 0 - 0 - 1 Bit 1 - 0 - 1 Radio Connection Beep Enable * Disable Battery Pow er Low Beep Enable * Disable Scan Rate Control PID : 00h [...]

Command Descriptions 2-159 Set WF S ystem (WF) Descriptions Change the desired one or more par ameters of the Sy stem Settings for W i-Fi Scanner . A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh A1h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yt[...]

Command Descriptions 2-160 Parameter(s) < T able 6-6-1 > Set WF System Parameter(s) Fi eld (T o be continued) Parameter / PID / Size Options Descript ions Wi-Fi Device Name PID : 00h 00h Size : 00h 1 1h (17 B ytes) 1 st Byte - XXh 2 nd ~17 th Byte - XXh X Xh...XXh T otal num ber of the Device Nam e in characters User defined 1 ~16 charact er([...]

Command Descriptions 2-161 Get WF S ystem (WF) Descriptions Request the desired one or more pa rameters of the Sy stem Settings for Wi-Fi Scanner A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh E2h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte [...]

Command Descriptions 2-162 Parameter(s) < T able 6-6-2 > Ge t WF Sys tem Parameter(s) Field Parameter PID Size Wi-Fi Device Name 00h 00h 00h 00h Admin Passw ord 00h 01h 00h 00h User Passw ord 00h 02h 00h 00h User A vail able Function s 00h 03h 00h 00h Brightness 00h 04h 00h 00h Backlight Duratio n 00h 05h 00h 00h Key T ones 00h 06h 00h 00h W [...]

Command Descriptions 2-163 Reply WF S ystem (WF) Descriptions Reply the desired one or more para meters of the S ystem Settings for W i-Fi Scann er Reply W F System is sent by the device in r esponse to the Get W F System command. It sends the values for all the desired parameter s requested in the Get W F S ystem command. A vailable for F & L [...]

Command Descriptions 2-164 Parameter(s) < T able 6-6-3 > Reply WF System Para meter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Wi-Fi Device Name PID : 00h 00h Size : 00h 1 1h (17 B ytes) 1 st Byte - XXh 2 nd ~17 th Byte - XXh X Xh...XXh T otal num ber of the Device Nam e in characters User defined 1 ~16 charact [...]

Command Descriptions 2-165 Set WF Sca nning (WF) Descriptions Change the desired one or more par ameters of the Scanning Settings for Wi-Fi Scann er . A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 9Eh 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B[...]

Command Descriptions 2-166 Parameter(s) < T able 6-7-1 > Set WF Scanning Parameter(s) Field (T o be continued ) Parameter / PID / Size Options Descript ions Barcode T ype PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Font Size PID : 00h 01h Size : 00h 01h (1 Byte) - 00h - 01h Compact * Norm al Record Suffix PID : 00h 02h [...]

Command Descriptions 2-167 Parameter(s) < T able 6-7-1 > Set WF Scanning Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Auto Save PID : 00h 0Ch Size : 00h 01h (1 Byte) - 00h - 01h - 02h Disable Enable with t ip Enable witho ut tip * Link Control PID : 00h 0Dh Size : 00h 01h (1 Byte) - 00h - 01h Radio Disable Radio[...]

Command Descriptions 2-168 Get WF Scan ning (WF) Descriptions Request the desired one or more pa rameters of the Scanni ng Settings for W i-Fi Scanne r A vailable for F & L series Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh DFh 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 [...]

Command Descriptions 2-169 Parameter(s) < T able 6-7-2 > Ge t WF Scanning Para meter(s) Field Parameter PID Size Barcode T ype 00h 00h 00h 00h Font Size 00h 01h 00h 00h Record Suffix 00h 02h 00h 00h Host A C K 00h 03h 00h 00h T ransmission Fo rmat 00h 04h 00h 00h Host A C K Timeout 00h 05h 00h 00h ACK Indicatio n 00h 07h 00h 00h Field Delimit[...]

Command Descriptions 2-170 Reply WF Scan ning (WF) Descriptions Reply the desired one or more para meters of the S canning Settings for W i-Fi Scanner Reply W F Scanning is sent by the device in response to the Get W F Scanning command. It sends the values for all the desi r ed pa rameters requested in the Get WF Scanning command . A vailable for F[...]

Command Descriptions 2-171 Parameter(s) < T able 6-7-3 > Reply WF Scanning Parame ter(s) Field (T o be continue d) Parameter / PID / Size Options Descript ions Barcode T ype PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Font Size PID : 00h 01h Size : 00h 01h (1 Byte) - 00h - 01h Compact * Norm al Record Suffix PID : 00h 0[...]

Command Descriptions 2-172 Parameter(s) < T able 6-7-3 > Reply WF Scanning Parame ter(s) Field (Continued) Parameter / PID / Size Options Descript ions Auto Save PID : 00h 0Ch Size : 00h 01h (1 Byte) - 00h - 01h - 02h Disable Enable with t ip Enable witho ut tip * Link Control PID : 00h 0Dh Size : 00h 01h (1 Byte) - 00h - 01h Radio Disable Ra[...]

Command Descriptions 2-173 2.7 T ransmissi on Set T ransmissi on (ALL) Descriptions Change the desired one or more parameters of the Trans mission settings as well as DataWizard Premium parame ters including Data Scrip t Acti ve Setting, Data Sc ript Setting, Security Script Setting and Data Wizard Premium Er ror Message. Data W izard Pre mium pa r[...]

Command Descriptions 2-174 Parameter(s) < T able 7-1-1 > Set T ransmission Para meter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Interface Del ay Settings PID : 00h 00h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h~63h 2 nd Byte - 00h - 01h~63h 3 rd Byte - 00h - 01h~63h Intermessage Delay None * 1~99 5)ms Inter[...]

Command Descriptions 2-175 Parameter(s) < T able 7-1-1 > Set T ransmission Para meter(s) Field (Cont inued) Parameter / PID / Size Options Descript ions Data S cript Active Setting PID : 02h 00h Size : 00h 01h (1 Byte) - 01h - 02h …… - 10h (See Note) Active 1st Data Script * Active 2nd Data Script …… Active 16th Data Scrip t Data S cr[...]

Command Descriptions 2-176 Get T ransmissi on (ALL) Descriptions Request the desired one or more para meters of the Trans mission settings as well as Data W izard Premium parame ters including Data Scrip t Acti ve Setting, Data Sc ript Setting, Security Script Setting and Data Wizard Premium Er ror Message. Data W izard Pre mium pa rameters are onl[...]

Command Descriptions 2-177 Parameter(s) < T able 7-1-2 > Ge t T r ansmiss ion Parameter(s) Field Parameter PID Size Interface Del ay Settings 00h 00h 00h 00h Record Suffix 01h 00h 00h 00h Preamble 01h 01h 00h 00h Postamble 01h 02h 00h 00h Symbology ID Tr ansmissi on 01h 03h 00h 00h Data S cript Active Setting 02h 00h 00h 00h Data S cript S et[...]

Command Descriptions 2-178 Reply T ransm ission (ALL) Descriptions Reply the desired one or more para meters of the T r ansmission settings as w ell as Data W izard Premium pa rameters including Dat a Script Active Setting, Dat a Script Setti ng, Security Script Setting and Data Wizard Premium Er ror Message. Reply T ransmission is sent by the devi[...]

Command Descriptions 2-179 Parameter(s) < T able 7-1-3 > Reply T ransmission Parameter(s) Field Parameter / PID / Size Options Descript ions Interface Del ay Settings PID : 00h 00h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h~63h 2 nd Byte - 00h - 01h~63h 3 rd Byte - 00h - 01h~63h Intermessage Delay None * 1~99 5)ms Intercharacter D elay No[...]

Command Descriptions 2-180 Parameter(s) < T able 7-1-3 > Reply T ransmission Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Data S cript Active Setting PID : 02h 00h Size : 00h 01h (1 Byte) - 01h - 02h …… - 10h (See Note) Active 1st Data Script * Active 2nd Data Script …… Active 16th Data Scrip t Data S cr[...]

Command Descriptions 2-181 Set T ransmissi on (WF) Descriptions Change the desired one or more parameters of the Trans mission settings as well as DataWizard Premium parame ters including Data Scrip t Acti ve Setting, Data Sc ript Setting, Security Script Setting and Data Wizard Premium Er ror Message. A vailable for F & L series Note that Data[...]

Command Descriptions 2-182 Parameter(s) < T able 7-1-1 > Set T ransmission Para meter(s) Field Parameter / PID / Size Options Descript ions Interface Del ay Settings PID : 00h 00h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h~63h 2 nd Byte - 00h - 01h~63h 3 rd Byte - 00h - 01h~63h Intermessage Delay None * 1~99 5)ms Intercharacter D elay Non[...]

Command Descriptions 2-183 Parameter(s) < T able 7-1-1 > Set T ransmission Para meter(s) Field (Cont inued) Parameter / PID / Size Options Descript ions Data S cript Active Setting PID : 02h 00h Size : 00h 01h (1 Byte) - 01h - 02h …… - 10h (See Note) Active 1st Data Script * Active 2nd Data Script …… Active 16th Data Scrip t Data S cr[...]

Command Descriptions 2-184 Get T ransmissi on (WF) Descriptions Request the desired one or more para meters of the Trans mission settings as well as Data W izard Premium parame ters including Data Scrip t Acti ve Setting, Data Sc ript Setting, Security Script Setting and Data Wizard Premium Er ror Message. A vailable for F & L series Note that [...]

Command Descriptions 2-185 Parameter(s) < T able 7-1-2 > Ge t T r ansmiss ion Parameter(s) Field Parameter PID Size Interface Del ay Settings 00h 00h 00h 00h Preamble 01h 01h 00h 00h Postamble 01h 02h 00h 00h Symbology ID Tr ansmissi on 01h 03h 00h 00h Data S cript Active Setting 02h 00h 00h 00h Data S cript S etting 02h 01h 00h 00h Security [...]

Command Descriptions 2-186 Reply T ransm ission (WF) Descriptions Reply the desired one or m ore parameters of the Transmissi on settings as well as Data W izard Premium parame ters including Data Scrip t Acti ve Setting, Data Sc ript Setting, Security Script Setting and Data Wizard Premium Er ror Message. Reply T ransmission is sent by the device [...]

Command Descriptions 2-187 Parameter(s) < T able 7-1-3 > Reply T ransmission Parameter(s) Field (T o be continued) Parameter / PID / Size Options Descript ions Interface Del ay Settings PID : 00h 00h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h~63h 2 nd Byte - 00h - 01h~63h 3 rd Byte - 00h - 01h~63h Intermessage Delay None * 1~99 5)ms Inter[...]

Command Descriptions 2-188 Parameter(s) < T able 7-1-3 > Reply T ransmission Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Data S cript Active Setting PID : 02h 00h Size : 00h 01h (1 Byte) - 01h - 02h …… - 10h (See Note) Active 1st Data Script * Active 2nd Data Script …… Active 16th Data Scrip t Data S cr[...]

Command Descriptions 2-189 2.8 S y mb ology Set S ymbology (ALL) Descriptions Change the desired one or more par ameters of the Sy mbology settings Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh 85h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parameter(s) First Para[...]

Command Descriptions 2-190 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (T o be conti nued) Parameter / PID / Size Options Descript ions Code 39 Readab ility PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Code 39 Setting PID : 00h 01h Size : 00h 06h (6 Bytes) 1 st Byte - 00h - 01h - 02h 2 nd Byte - 00h -[...]

Command Descriptions 2-191 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions Codabar Readabi lity PID : 01h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Codabar Setting s PID : 01h 01h Size : 00h 04h (4 Bytes) 1 st Byte - 00h - 01h - 02h - 03h 2 nd Byte - 00h [...]

Command Descriptions 2-192 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions UPC- A /UPC-E Readabilit y PID : 02h 00h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h UPC- A R eadability Disable Enable * UPC-E Readab ility Disable Enable * UPC- A /UPC-[...]

Command Descriptions 2-193 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions EAN-13/E AN-8 Readabilit y PID : 03h 00h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h EAN/JAN-13 R eadabilit y Disable Enable * EAN/JAN-8 R eadabilit y Disable Enable * EA[...]

Command Descriptions 2-194 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions IA T A R eadabilit y PID : 04h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable IA T A Setting PID : 04h 01h Size : 00h 04h (4 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h - 02h - 0[...]

Command Descriptions 2-195 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (T o be conti nued) Parameter / PID / Size Options Descript ions Code 25 Setting PID : 04h 07h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h Check Digit V er ification Disable * Enable Check Digit Tr ansmission Disable * Enable Co[...]

Command Descriptions 2-196 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions MSI/Plessey Re adability PID : 07h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable MSI/Plessey Setting PID : 07h 01h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h - 02h 2 nd Byte - 00h [...]

Command Descriptions 2-197 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions UK/Plesse y Readabilit y PID : 09h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable UK/Plesse y Setting PID : 09h 01h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h [...]

Command Descriptions 2-198 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions Composite Cod e Readability PID : 21h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable UPC Composit e Mod e PID : 21h 01h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable PDF417/ M ic[...]

Command Descriptions 2-199 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions QR Code Read ability PID : 30h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Micro Q R Code Readability PID : 30h 01h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * QR Code Sett [...]

Command Descriptions 2-200 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions Aztec Readab ility PID : 33h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Aztec Setting PID : 33h 01h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h - 02h Aztec [...]

Command Descriptions 2-201 Parameter(s) < T able 8-1-1 > Set Sy mbology Parameter(s) Field (Con tinued) Parameter / PID / Size Options Descript ions US Postnet Re adability PID : 53h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable US Postnet Chec k Digit T ransmission PID : 53h 01h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable[...]

Command Descriptions 2-202 Get Symbolo gy (ALL) Descriptions Request the desired one or more pa rameters of the Sy mbology settings Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh C6h 00h 00h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1 Byte Parameter(s) First Parameter ……… [...]

Command Descriptions 2-203 Parameter(s) < T able 8-1-2 > Ge t Symbology Parameter(s) Field (T o be cont inued) Parameter PID Size Code 39 Readab ility 00h 00h 00h 00h Code 39 Setting 00h 01h 00h 00h Code 39 Leng th 00h 02h 00h 00h T rioptic Co de 39 Readabil ity 00h 03h 00h 00h Code 39 Securit y Level 00h 04h 00h 00h Codabar Readabi lity 01h [...]

Command Descriptions 2-204 Parameter(s) < T able 8-1-2 > Ge t Symbology Parameter(s) Field (Cont inued) Parameter PID Size Code 128/E AN-128 Reada bility 08h 00h 00h 00h Code 128/E AN-128 Settin g 08h 01h 00h 00h Code 128/E AN-128 Length 08h 02h 00h 00h Code 128/E AN-128 Securit y Level 08h 03h 00h 00h GS1-128 Read ability 08h 04h 00h 00h GS1[...]

Command Descriptions 2-205 Parameter(s) < T able 8-1-2 > Ge t Symbology Parameter(s) Field (Cont inued) Parameter PID Size Chinese Sen sible Readabilit y 34h 00h 00h 00h Chinese Sen sible Length 34h 01h 00h 00h Korea Post Code 50h 00h 00h 00h Australian Po st Readabili ty 51h 00h 00h 00h Australian Po st Output Format 51h 01h 00h 00h US Plane[...]

Command Descriptions 2-206 Reply S ymbology (ALL) Descriptions Reply the desired one or more para meters of the S ymbology settings Reply Symbology is sent by t he device in response to the Get Symbology command. I t s ends the values for all the desired parameter s requested in the Get Symbology command. Packet Format Prefix Opcode St atu s Lengt [...]

Command Descriptions 2-207 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Code 39 Readab ility PID : 00h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Code 39 Setting PID : 00h 01h Size : 00h 06h (6 Bytes) 1 st Byte - 00h - 01h - 02h 2 nd Byte - 00[...]

Command Descriptions 2-208 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Codabar Readabi lity PID : 01h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Codabar Setting s PID : 01h 01h Size : 00h 04h (4 Bytes) 1 st Byte - 00h - 01h - 02h - 03h 2 nd Byte - 00[...]

Command Descriptions 2-209 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions UPC- A /UPC-E Readabilit y PID : 02h 00h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h UPC- A R eadability Disable Enable * UPC-E Readab ility Disable Enable * UPC- A /UP[...]

Command Descriptions 2-210 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions EAN-13/E AN-8 Readabilit y PID : 03h 00h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h EAN/JAN-13 R eadabilit y Disable Enable * EAN/JAN-8 R eadabilit y Disable Enable * [...]

Command Descriptions 2-21 1 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions IA T A R eadabilit y PID : 04h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable IA T A Setting PID : 04h 01h Size : 00h 04h (4 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h - 02h [...]

Command Descriptions 2-212 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (T o be cont inued) Parameter / PID / Size Options Descript ions Code 25 Setting PID : 04h 07h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h Check Digit V er ification Disable * Enable Check Digit Tr ansmission Disable * Enable[...]

Command Descriptions 2-213 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions MSI/Plessey Re adability PID : 07h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable MSI/Plessey Setting PID : 07h 01h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h - 02h 2 nd Byte - 00[...]

Command Descriptions 2-214 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions UK/Plesse y Readabilit y PID : 09h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable UK/Plesse y Setting PID : 09h 01h Size : 00h 03h (3 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01[...]

Command Descriptions 2-215 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Composite Cod e Readability PID : 21h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable UPC Composit e Mod e PID : 21h 01h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable PDF417/ M [...]

Command Descriptions 2-216 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions QR Code Read ability PID : 30h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * Micro Q R Code Readability PID : 30h 01h Size : 00h 01h (1 Byte) - 00h - 01h Disable Enable * QR Code Set[...]

Command Descriptions 2-217 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions Aztec Readab ility PID : 33h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable Aztec Setting PID : 33h 01h Size : 00h 02h (2 Bytes) 1 st Byte - 00h - 01h 2 nd Byte - 00h - 01h - 02h Azte[...]

Command Descriptions 2-218 Parameter(s) < T able 8-1-3 > Reply S y mbology Parameter(s) Field (Continued) Parameter / PID / Size Options Descript ions US Postnet Re adability PID : 53h 00h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enable US Postnet Chec k Digit T ransmission PID : 53h 01h Size : 00h 01h (1 Byte) - 00h - 01h Disable * Enab[...]

Command Descriptions 2-219 2.9 De vice Info Get De vice Info (ALL) Descriptions Request the desired dev ice information as w ell as Data W izard Premium information p arameters Packet Format Prefix Opcode St atu s Lengt h Parameter(s) LRC Suffix 7Eh D6h 00h 01h 00h V ariable See Below V ariable 7Eh 1 Byte 3 B ytes 1 Byte 2 Bytes V ariable 1 B yte 1[...]

Command Descriptions 2-220 Parameter(s) < T able 9-1-1 > Ge t Device Info Parame ter(s) Field Parameter PID Size Custom ID 00h 00h 00h 00h Module No. 00h 01h 00h 00h Hardware ID 00h 02h 00h 00h Software ID 00h 03h 00h 00h DataWi zard Prem ium Info. 01h 00h 00h 00h T ota l Count o f Data Sc ripts 01h 01h 00h 00h[...]

Command Descriptions 2-221 Reply De vice Info (ALL) Descriptions Reply the desired dev ice information as wel l as Data W izard Premium information p arameters. Reply Device S tatus is sent by the dev ice in response to the Get Device I nfo command. It send s t he values for all the desired parameter s requested in the Get Device Info com mand. Pac[...]

Command Descriptions 2-222 Parameter(s) < T able 9-1-2 > Reply D evice Info Parameter (s) Field Parameter / PID / Size Options Descript ions Custom ID PID : 00h 00h Size : 00h XX h (V ariabl e Bytes) - XXh…X Xh XXh (For exam ple: CINO) Module No. PID : 00h 01h Size : 00h XX h (V ariabl e Bytes) - XXh…X Xh XXh (For exam ple: FUZZYSCAN F790[...]

Command Descriptions 2-223 Get Record C ount (WF) Descriptions Request the tot al record count of Ba tch Mode A vailable for F & L series Packet Format Prefix Opcode St atus Length Parameter(s) LRC Suffix 7Eh D6h 00h 03h 00h 00h 00h <Null> D5h 7Eh 1 Byte 3 B ytes 1 B yte 2 Bytes 0 Byte 1 B yte 1 B yte . Host Requiremen ts If the device su[...]

Command Descriptions 2-224 Reply Recor d Count (WF) Descriptions Reply the tot al record count o f Batch Mode A vailable for F & L series Packet Format Prefix Opcode St atus Length Parameter(s) LRC Suffix 7Eh 17h 00h 03h 00h 00h 02h See Notes V aria ble 7Eh 1 Byte 3 B ytes 1 B yte 2 Bytes 2 Bytes 1 Byte 1 Byte . Host Requiremen ts Since Repl y [...]

Command Descriptions 2-225 2.10 Ackn owledgement De v ice ACK (ALL) Descriptions Device acknow ledgement Device ACK messag e is used t o guarantee the reliability of packe t transfers f or commands t hat have no natural response, such as Action Com mands, Set commands. Device ACK can not be disabled. Packet Format Prefix Opcode St at us Length Para[...]

Command Descriptions 2-226 De v ice N AK (ALL) Descriptions Device non-acknow ledgement Device NAK messag e is used t o guarantee the reliability of packe t transfers f or commands t hat have no natural r esponse, such as Action Commands, Set c ommands. On receiving a bad command, the scanner wi ll send a Dev ice NAK message to issue a command erro[...]

Command Descriptions 2-227 Host A CK (ALL) Descriptions Host acknowledge ment in packet for mat. Host ACK message is sent from host to dev ice to guarantee the correc tness of the decode data. Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 91h 10h 00h 00h 00h 04h See below V ariable 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 4 Byte[...]

Command Descriptions 2-228 Host N A K (ALL) Descriptions Host non-acknow ledgement Host NAK message is sent from host to dev ice to indicate that the dat a receiv ed is not correct. Packet Format Prefix Opcode Status Length Parameter(s) LRC Suffix 7Eh 90h 10h 00h 00h 00h 04h See below V ariable 7Eh 1 Byte 3 B ytes 1 B yte 2 B ytes 4 Bytes 1 Byte 1 [...]

Command Descriptions 2-229 Host A CK Ex tension (WF) Descriptions Host acknowledge ment Host ACK Extension is a n extension of Host A CK which added a user defined messa ge. A vailable for F & L series Packet Format Prefix Opcode St atus Length Parameter(s) LRC Suffix 7Eh 91h 10h 01h 00h 02h 00h See Next Pag e V ariable 7Eh 1 Byte 3 B ytes 1 B [...]

Command Descriptions 2-230 Parameter(s) Size Parameter V alue 4 Bytes Dat a Packet ID XXh XXh XXh XXh( See Notes ) 2 Bytes Code Page XXh XXh ( See Notes ) Bit 7 Manual Close - 0 Disable - 1 Enable 1 Byte Bit 0~6 A uto Close - 0h Disabl e - 3h af ter 3 seconds - 5h af ter 5 seconds - 8h af ter 8 seconds - Ah af ter 10 seconds Lef t A lign Set Bit 7 [...]

Command Descriptions 2-231 . Notes 1. Data Packet ID : If T he Trans m ission Form at is set to “Pack et Data” (SET UP->Online Scanning - > Online Optio ns -> Transmission Form at -> Packet Data), th e first 4 b ytes of t he Decode Data (Chapter 2.2) C omm and’s Param eter field indicates the Data Packet ID. 2. T he following Char[...]

Command Descriptions 2-232 Host N A K Ex tension (WF) Descriptions Host acknowledge ment Host NAK Extension is a n extension of Host NAK which added a user de fined message. A vailable for F & L series Packet Format Prefix Opcode St atus Length Parameter(s) LRC Suffix 7Eh 90h 10h 01h 00h 02h 00h See Next Pag e V ariable 7Eh 1 Byte 3 B ytes 1 B [...]

Command Descriptions 2-233 Parameter(s) Size Parameter V alue 4 Bytes Dat a Packet ID XXh XXh XXh XXh( See Notes ) 2 Bytes Code Page XXh XXh ( See Notes ) Bit 7 Manual Close - 0 Disable - 1 Enable 1 Byte Bit 0~6 A uto Close - 0h Disable - 3h after 3 seconds - 5h after 5 seconds - 8h after 8 seconds - Ah after 10 seconds Lef t A lign Set Bit 7 to 1,[...]

Command Descriptions 2-234 . Notes 1. Data Packet ID : If T he Trans m ission Form at is set to “Pack et Data” (SET UP->Online Scanning - > Online Optio ns -> Transmission Form at -> Packet Data), th e first 4 b ytes of t he Decode Data (Chapter 2.2) C omm and’s Param eter field indicates the Data Packet ID. 2. T he following Char[...]

Command Descriptions 3-1 If you ha ve any prob lem with your equipmen t, ple ase contact Cino for technical support. Contact information is available at Cino website: www.cino.com.tw. If you purchased your product from a Cino business partne r, please contact that business partner for support. W hen y ou conta ct Cino fo r technical support, please[...]

FuzzyScan Serial Command Manual CINO GROUP PC WORTH INT’L CO., L TD. www.cino.com.tw[...]