Cisco Systems Cisco uBR10012 manuel d'utilisation

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco uBR1 0 0 1 2 Univ er sal Br oadband Router Hardw are Installation Guide December 1 9, 20 08 Text Part Number: OL -18259-01[...]

THE SPECIFICATION S AND INFORMATION REGARDING THE P RODUCTS IN TH IS MANUAL AR E SUBJECT TO CHAN GE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY [...]

iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 CONTENTS Preface xi Purpose xi Audience xi Document Organization xii Related Documentation xii Conventi ons xiii Safety Information Referral Warning xiv Terms and Acronyms xix Obtaining Documentation and Submitting a Serv ice Request xxi CHAPTER 1 Cisco uBR10012 [...]

Contents iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Connector Ports 1-18 PC Media Card Slots 1-18 LCD Screens 1-19 PRE LED Indicators and Buttons 1-19 PRE Module Disposal 1-20 SIP and SPA Compatibility 1-20 DC Power Entry Modules 1-20 DC PEM LEDs 1-22 AC Power Entry Modules 1-22 AC PEM LEDs 1-23 Power Supp[...]

Contents v Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 CHAPTER 2 Preparing for Installation 2-1 Safety 2-1 Preventing Electrostatic Disch arge Damage 2-2 Chassis-Lifting Guidelines 2-2 Electrical Safety 2- 3 Site Requirements 2-4 Environmental Site Require ments 2-5 Temperature and Humidity Requirements 2-6 Po[...]

Contents vi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Recommended Too ls and Supplies 3-26 Attaching the Grounding Cable 3-26 Connecting DC Power to the Cisco uBR1001 2 Router 3-28 Recommended Too ls and Supplies 3-29 Connecting the Cisco uBR100 12 Chassis to a DC Power Source 3-29 Connecting Alarm Indicato [...]

Contents vii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Formatting PC Media Cards 3-66 CHAPTER 4 Troubleshooting the Installation 4-1 Troubleshooting Methods 4-2 Before You Call for Technical Assistance 4-2 Problem Solving Using a Subsystems Approach 4-2 Troubleshooting Installation Problems 4-2 General Troub[...]

Contents viii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Replacing a Redundant AC PEM 5-22 Replacing Both AC PEMs 5-26 Removing and Replacing the PRE Module 5-28 Removing the PRE Module 5-28 Replacing the PRE Module 5-32 Removing and In stalling a PC Media Card 5-34 Removing and Replacing a Timing, Co mmunica[...]

Contents ix Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Fast Ethernet Port Cables and Pinouts B-4 How to Identify an RJ-45 Crossover Cable B-5 How to Identify an RJ-45 Straight-Through Ca ble B-6 Connecting a Cable to an RJ-4 5 Connector B-7 Fiber-Optic Cables and Connectors B-8 APPENDIX C Frequency Allocation[...]

Contents x Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01[...]

xi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface This section describes the purpose, audience, organi zation, and con ventions used in this guide. This section also provides a re vision history and a list of related documents as well as instructions for obtaining technical assistance and addition al info[...]

xii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface War ni ng Only trained and qualified personnel sh ould be allowed to install, replace, or service this equipmen t. Statement 1030. Document Organization This publicati on is org anized as follo ws: Related Documentation The follo wing is a list of documen[...]

xiii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface Additional document ation can be found here: • For information on installi ng and replacing f ield-re placeable units (FR Us), su ch as the flash memory on Cisco uBR10012 routers, see the document for each FR U or go to the follo wing URL: http://www .[...]

xiv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface Safety Information Referral Warning See the follo wing URL for the foreign l anguage translations of all t he warnings used in this guid e: http://www .cisco.com/en/ US/docs/cable/cmts/ub r10012/reg ulatory/compliance/ub10r csi.html Warning Definition War[...]

xv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface War nu ng WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol b edeutet Gefahr . Sie befinden sich in einer Situation, die zu V erletzungen füh ren kann. Machen Sie sich vor d er Arbeit mit Geräten mit den Ge fahren elektrischer Schaltungen u nd den üblichen[...]

xvi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface Va r n i n g ! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om faro rna med elkretsar och känna till[...]

xvii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V oc ê se encontra em uma situação em que há risco de lesõe s corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os c[...]

xviii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface[...]

xix Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface Terms and Acronyms T o fully understand the co ntent of this guide, yo u should be familiar w ith the follo wing terms and acronyms: Note A complete list of terms and acron yms is av ailable in the Internetworking T erms and Acr onyms guide, av ailabl e o[...]

xx Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface • FR U—Field-replaceable unit (rou ter components that do no t require replacement by a Cisco-certified service provider) • FTP—Foil twisted- pair • HDLC—High-Le vel Data Lin k Control • HHGE—Half-Hei ght Gigabit Ethernet • IPSec—IP Sec[...]

xxi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface Obtaining Documentation and Submitting a Service Request For info rmation on obtaining documentation, sub mitting a service request, and gatheri ng additional information, see the mont hly What’ s Ne w in Cisco Pr oduct Docu mentation , which also lists[...]

xxii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Preface[...]

CH A P T E R 1-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 1 Cisco uBR10012 Universal Broadband Router Overview The Cisco uBR10012 univ ersal broadban d router provides a hig h-end, high-performa nce, high-capac ity Cable Modem T ermination System (CM TS) solution. The Cisco uBR10012 router i s an aggre gati[...]

1-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router Features Cisco uBR10012 Router Features The Cisco uBR10012 router has the follo wi ng features: • 19-inch rack mo unt, 22.75-inch de pth. See “Cisco uBR10012 Router” . • 31[...]

1-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Comparisons with Other Cisco CMTS Platforms – Multiple fans in t he fan assembly pro vide redundanc y to support single f ailure. – Status LEDs on the f an assembly indicate single or mu ltiple fa[...]

1-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router Functional Overview Upstream Data Path The follo wing e xample describes the upstream data path. 1. A request for service is generate d by a subscriber . The modem transmits the re[...]

1-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Router and Cisco IOS Software a. Each ASIC decodes the head er to determine if th e pack et is destined for one of the do wnstream ports on that card. If so, the downstream header is re[...]

1-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router and Cisco IOS Software Ta b l e 1 -2 DOCSIS and Eur oDOCSIS 2. 0 Up stream D ata Rat es Upstream Channel Width Modulation Scheme, bit/symbol Baud Rate, symbol/sec Raw Bit Rate, Mb/[...]

1-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview NEBS Level 3 Compliance NEBS Level 3 Compliance The Cisco uBR10012 router is Netw ork Equipment Building S ystem (NEBS) Le vel 3 compli ant. This includes the following cate gories: • Filtration and[...]

1-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Rout er Hardware Figur e 1 -1 Cisco uBR1 00 12 Universal Br oadband Rout er—F r ont View with Fr ont Cov er 56300 POW ER MISWIRE FAU LT POWER MISWIRE FAU LT ALARMS C[...]

1-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Hardware Figure 1-2 sho ws the front of a fully loaded chassis without the front cover . Figur e 1- 2 Cisco uBR1 00 12 Rout er Chassis—Fr ont V iew without [...]

1-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Rout er Hardware Figure 1-3 sho ws the re ar of a fully-lo aded Cisco uBR10012 router . Figur e 1- 3 Cisco uBR1 00 12 Rout er Chassis—Rear View Caution The handles [...]

1-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Hardware Cisco uBR10012 Router Slot Numbering Figure 1-4 sho ws the slot numbering for the l ine cards a nd TCC+ cards in the rear of the chassis. The Cisco [...]

1-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Rout er Hardware Figure 1-5 sho ws the slot numbering for th e Fast Ethern et interface on the acti ve PRE module. Figur e 1 -5 Cisco uBR1 00 12 Chassis Slot Number i[...]

1-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules Cisco uBR10012 Universal Broadband Router Modules The following section describes the modules u sed in the Cisco u BR10012 rout er . For a list of fi[...]

1-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules Caution Although the f an assembly supports hot-sw apping and can be replaced without interruption to system operation, to prev ent ov erheating, do n[...]

1-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules LCD Cable The LCD ribbon cable connects the LCD module to th e backplane. The folded end is connected to the LCD module. See Figure 1-9 . Figur e 1 -[...]

1-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules combination of a general purpose RISC pr oce ssor with adv anced programmable PXF netw ork processors provides the capacity to support th e aggregati [...]

1-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules Redundant PRE Modules The PRE module support s redundant oper ation (tw o PRE modules in a Ci sco uBR10012 chassis). If the primary PRE fails, the se[...]

1-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules The PRE4 conta ins a CompactFl ash Disk slot (d isk0) and 128 MB of onboar d flash memory . Figure 1-12 sho ws the PRE4 faceplate. Figur e 1 -12 PRE4 [...]

1-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules LCD Screens The two LCD screens belo w the PC media card slots display alphanumeric information about the status of the of the PRE module. PRE LED In[...]

1-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules PRE Module Disposal The PRE module contains a small lith ium battery . Some jurisdictions re strict the ways in which you can dispose of items contain[...]

1-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules The optional A C-input po wer shelf pro vides DC pow er to the Cisco uBR10012 router when a DC p ower outlet is unav ailable or where A C po wer is d[...]

1-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules DC PEM LEDs Ta b l e 1-6 describes the LEDs on the DC PEM. AC Power Entry Modules The Cisco uBR10012 router ships wit h two A C po wer en try modules [...]

1-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules Ti p For fully redundant po wer pr otection, use either an uninterrup tible po wer supply (UPS) or a separate A C-input po wer source for each A C PE[...]

1-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules Power Supply Cables The A C PEM requires dif ferent po wer supply cables, depen ding on the country of operati on. Ta b l e 1-8 lists the product o rd[...]

1-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Universal Broadband Router Modules Figur e 1 -15 Airflow Thr ough the Cisco uBR1 0 0 12 Chassis with Dual AC PEMs Timing, Communication, and Control Plus Card On the Cisco uBR10012 rou[...]

1-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universa l Broadband Router Modules When two TCC+ cards are installed, they are configur ed as acti v e and backup (redundant). If the TCC+ card in the f irst slot is wor king at system [...]

1-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cable Interfa ce Line Cards TCC+ Card LEDs The faceplate on the TCC+ card has sev en LEDs labeled PO WER, ST A TUS, MAINT , PRESENT , and A CTIVE. Separate PRESENT and A CTIVE LEDs are associated wit[...]

1-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interface Line Cards Cisco uBR10-LCP2-MC16x (C, E, S) Cable Interface Line Cards Note The Cisco uBR10-LCP2-MC16x (C, E, S) cable inte rface line cards are end of sale. For additional information,[...]

1-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cable Interfa ce Line Cards The Cisco uBR10-LCP2 adapter card and the Cisco uBR10-MC16 x cable interface line cards (MC16C, MC16E, and MC16S) are mechanical ly connec ted to each other by means of br[...]

1-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interface Line Cards Default mod ulations: • 64 quadrature amplit ude modulations (QAM) for do wnstream • quadrature amplitude p hase-shift ke ying (QPSK) for upst ream Figure 1-18 sho ws the[...]

1-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cable Interfa ce Line Cards The Cisco uBR10-LCP2-MC16S cable interface l ine card has one downstream port and si x upstream ports. The upstream ports are label ed US0 through US5. The do wnstream por[...]

1-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interface Line Cards Cisco uBR10-LCP2-MC28C Cable Interface Line Card The Cisco uBR10-LCP2-MC28C cable interface line ca rd is a combination of two components: • Cisco uBR-MC28C—Provid es two[...]

1-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cable Interfa ce Line Cards The Cisco uBR10-LCP2-MC28C cable interface line card is conf igured i dentically to the Cisco uBR-MC28C cable interface line card. For inform ation about configuri ng the [...]

1-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interface Line Cards Cisco uBR10-LCP2-MC28C LEDs The LCP adapter card and the cable interface line card each have their o wn set of status LEDs on the front of the module. The Cisco uBR10-LCP2 ad[...]

1-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cable Interfa ce Line Cards Upstream data from the subscriber , comes th ro ugh the upstream ports (US0- US19) on the Cisco uBR10-MC5X20S/U cable interf ace line card. The line card processes and con[...]

1-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Ca rds Network Uplink Cards The follo wing sections describe the netw ork uplink cards used in the Cisco uBR100 12 uni versal broadband router: • Cisco Single Port Gi gabit Ethernet Li[...]

1-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Network Uplink Cards Warning Statement for Finland War ni ng Alleviates ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersä teilylle. Äjä katso säteeseen. Statement 35 Figure 1-[...]

1-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Ca rds Cisco Half-Height Gigabit Ethernet Line Card The Cisco HHGE line car d ( Figure 1-25 ) contains a single Gig abit Ethernet port that provides a trunk uplink to switches and core r[...]

1-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Network Uplink Cards LEDs This line card f aceplate contai ns the follo wing LEDs that continuously indicate line card status as well as the status of the po rt during operation (see Figure 1-25 ): F[...]

1-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Ca rds When shorter distances of single-mod e fiber are used, it may be necessary to insert an inline optical attenuator in the link, to a v oid ov erloading the recei v er . A 5-decibel[...]

1-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Network Uplink Cards Cisco OC-12 POS Line Card The OC-12 POS card provides a trun k uplink that su pports up to 622 Mbps ov er a standard SONET/SDH interface usin g a single-mo de fiber intermedia te[...]

1-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Ca rds Cisco OC-12 POS Line Card LEDs Ta b l e 1-21 describes the LEDs and their function s on the Cisco OC-12 POS li ne card. Cisco uBR10-SRP-OC12SML DPT WAN Line Card The Cisco uBR10 S[...]

1-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Network Uplink Cards Note The Cisco uBR10-SRP-OC12SML DPT W AN line card requires two card sl ots. For that reason, the card is normally installed in Slot 2 and Slot 4 if yo u are using two cards. If[...]

1-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Ca rds Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs Ta b l e 1-22 describes the LEDs and thei r functions on the Cisco uBR10-SRP-OC12SML DPT W AN line card. Ta b l e 1 -22 Cisco uBR1 0[...]

1-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Network Uplink Cards Attenuation The Cisco uBR10-SRP-OC12SML DPT W AN line card is designed to be used at any distance bet ween 15 and 40 kilometers (km). For sh ort-distance operations (less t han 1[...]

1-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Ca rds The Cisco uBR10012 OC-48 DPT/POS interface module is a standard implementation of packet over SONET switching, and supports the follo wing features: • OC-48 bandwidth between t [...]

1-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Optical Conne ctors and Cables Optical Connectors and Cables For singl e-mode optical f iber connections, u se one duplex SC-typ e cable (see Figure 1-30 ), or two simplex SC-type cables (see Figure [...]

1-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router FRU Resources Cisco uBR10012 Router FRU Resources The follo wing section lists the field-replaceabl e units (FR Us), FR U product order numbers, and provides links to specif ic FR[...]

1-49 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Un iversal Broadband R outer Overview Cisco uBR10012 Router FRU Resources FRU Documentation Ta b l e 1-26 lists the Cisco fiel d replaceable unit (FR U) documentation for the mod ules and interface lin e cards that are used in the Cisco [...]

1-50 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router FRU Resources Ta b l e 1 -26 Cisco FRU Docume nt Title and URL Document title URL 2400W A C-Input P ower Shelf for the Cisco uBR10012 Uni versal Br oadband Router http://www .cisc[...]

CH A P T E R 2-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 2 Preparing for Installation Before you install the Cisco uBR1 0012 uni versal broadban d router , consider: • The power and cabling requirements that must be in place at your install ation sites • The equipment required to install the router •[...]

2-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 2 Preparing for Installatio n Preventing Electrostatic Disc harge Damage • Do not wear loose clothin g, jewel ry (including ring s and ch ains), or other items that could get caught in the chassis. • The Cisco uBR10012 router operates safely when it i[...]

2-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 2 Pre paring for Installation Electrical Safety • Before you install the sy stem, ensure that your site is prop erly prepared so you can a v oid ha ving to mov e the chassis later to accommodate po wer sources and netw ork connections. • A fully popul[...]

2-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 2 Preparing for Installatio n Site Requirements Follo w these basic guidelines when you are worki ng with an y electrical equipment: • Before begin ning any procedures requ iring access to the chassis interior , locate th e emergenc y po wer-of f switch[...]

2-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 2 Pre paring for Installation Site Requirements Environmental Site Requirements The en vironmental mo nitoring functional ity in the Cisco uBR10012 ro uter protects the system and components from potenti al damage from e xcessi ve v o ltage and temperatur[...]

2-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 2 Preparing for Installatio n Site Requirements Figur e 2-1 Cooling Air P ath for the Cisco uBR1 00 12 Temperature and Humi dity Requirements Ta b l e 2-1 lists the operating and nonoperating en vironmental site requirements. The ranges listed are those w[...]

2-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 2 Pre paring for Installation Site Requirements Power Guidelines Follo w these precautions and recommendations when planning po wer conn ections to the Cisco uBR10012 router: • Check the po wer at your site before installation a nd periodically after in[...]

2-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 2 Preparing for Installatio n Site Requirements Plant Wiring Guidelines When planning the location o f the ne w system, consider the dist ance limitations fo r signaling, EMI, and connector compatibility , as described in the following sections. War ni ng[...]

2-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 2 Pre paring for Installation Site Requirements • Distance limitations for each si gnal type • The specific cables you need to connect each interface • Any additio nal interface equipment you need, such as transcei vers, hubs, switches, modems, chan[...]

2-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 2 Preparing for Installatio n Site Requirements Rack-Mounting Considerations The Cisco uBR10012 router should b e rack-mounted for prop er operation and maintenance. Th e rack-mounting hardware included wi th chassis is suit able for standard 19-i nch eq[...]

2-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 2 Pre paring for Installation Site Requirements • If you are also usin g the optional A C-input power shelf, i t should be installed immediately belo w the Cisco uBR10012 chassis for power cabling con venie nce. Ho we ver , install the A C-input po wer[...]

2-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 2 Preparing for Installatio n Site Requirements[...]

CH A P T E R 3-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 3 Installing the Cisco uBR10012 Router This chapter describes the pro cedures for inst alling the Cisco uBR10012 uni v ersal broadband ro uter in an equipment rack. It also describe s how to connect interface and power cables, the proper way to po we[...]

3-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Installation Methods Installation Methods For stab ility and ease of use, the Cisco uBR1 0012 router chassis sh ould be mounted in an equipment rack. The chassis can be mounted in a 19-inch (standard) equipment rack [...]

3-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Preparing the Cisco uBR10012 Router for Rack -Mounting General Rack Installation Guidelines When planning you r rack installation, consider t he follo wing guidelines: • The Cisco uBR10012 router chassi s requires[...]

3-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Removing the Power Modules, Fan Assembly, and Line Cards The Cisco uBR10012 router is shipped w ith all ordered co mponents already installed in the chassis. W[...]

3-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Figur e 3-1 Removing the Cisco uBR1 00 12 Chassis Front Co ver 56422 POWER MISWIRE FAU LT ALARMS CISCO 10000 F AIL PERFORMANCE ROUTING ENGINE C O N S O L E S [...]

3-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Removing the DC Power Entry Modules Use this procedure to remo ve the DC po wer entry modul es (PEMs) from the Cisco uBR10012 chassi s. Step 1 V erify that the[...]

3-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Figur e 3-3 Removing a DC PEM Removing the AC Power Entry Module Use this procedure to remo ve the A C po wer entry mod ules (PEMs) from the Cisco uBR10012 ch[...]

3-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Step 7 Set the A C PEM aside. Step 8 Repeat Step 1 through Step 7 to remov e the second A C PEM. Figur e 3-4 AC P o wer Co rd and A C On/Of f S witch Locations[...]

3-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Figur e 3-5 Removing the A C PEM Removing the Fan Assembly Step 1 Loosen the capti v e scre ws on each side of the fa n assembly module ( Figure 3-6 ). Step 2[...]

3-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Figur e 3-6 Removin g the F an Assembly Module Removing the Cable Interface Line Cards and Uplink Cards Step 1 T o remove the cable interface and network upli[...]

3-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Removing the Power Modules, Fan Assembly, and Line Cards Figur e 3-7 Captiv e Scr ews and Ej ecto r Lever s 72508 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1 4 [...]

3-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitters Figur e 3-8 Removing the Cisco uBR1 0-MC5x20S /U/ H Cable Interf ace Line Car d Note This chassis does not sho w the sl ot splitter and HHG[...]

3-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitters Removing a Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to remo ve the HHGE li ne card from the slot splitter: Step[...]

3-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitters Figur e 3-1 0 Opening the Ejector Lev ers Caution Do not operate the system unless a ll slots contain a line card or a blank faceplate. Alw[...]

3-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitters Removing the Slot Splitter Use the follo wing procedure to remo ve a slot splitter from the chassis: Step 1 Attach an antistatic wrist str[...]

3-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitters Step 4 Slide the splitter ou t of the slot ( Figure 3-12 ). Step 5 If you are not installing a rep lacement splitter or a lin e card, insta[...]

3-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Attaching the Mounting Brackets Attaching the Mounting Brackets The Cisco uBR10012 router is shipped w ith four mounting brack ets that can be attached to ei ther the front or rear of the chassis, depending on your[...]

3-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Attaching the Mounting Brackets Figur e 3-14 Brack et Location for Flus h Fr ont-Mounting the Chassis 72311 ALAR M S C IS CO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H[...]

3-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Attaching the Mounting Brackets Figur e 3-15 Brac k et Location for Flush Rear -Mounting the Chassis 72312[...]

3-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Attaching the Mounting Brackets Figur e 3-16 Brac k et Location for Of fset F ront-Mounting the Chassis Note Y ou must use three screws to inst all each large bracket and tw o screws to install each small bracket. T[...]

3-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Installing the Cable Management Brackets (Op tional) Installing the Cable Manage ment Brackets (Optional) The Cisco uBR1001 2 router is shipped wit h two cable-mana gement brackets that are installed on the rear of[...]

3-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Mounting the Chassis in the Rack Step 2 Align the mounting h oles on the far left and f ar right on the brack et first, so that t he center mounting hole will be a ligned properl y . Step 3 Use the three screws that[...]

3-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Mounting the Chassis in the Rack Recommended Tools and Supplies Ta b l e 3-1 list s the tools, eq uipment, and su pplies necess a ry to connect the system ground to the chassis. Installing the Cisco uBR10012 Chassi[...]

3-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Mounting the Chassis in the Rack Step 1 V erify that you hav e remo ved the f an assembly m odule, DC PEMs, cable interf ace line cards, and network uplink line cards before attempting to mo ve the chassis (see “R[...]

3-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting the Chassis to Ground Figur e 3-18 Attac hing the Chassi s to the Equipment Rack Connecting the Chassis to Ground Connecting the Cisco uBR10012 rout er chassis to earth ground is required for all DC po w[...]

3-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Ch assis to Ground Recommended Tools and Supplies Ta b l e 3-2 li sts the tools, equipment, and supplies necess a ry to connect the system ground to the chassis. Attaching the Grounding Cable The foll[...]

3-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting the Chassis to Ground Figur e 3-19 Attac hing Grounding Wire t o the Grounding Lug Figur e 3-20 Location of the Gr ound Lug Connect ors 0.75 in. (2 cm) Grounding lug Wire 30020 103479 ALARM S CISCO 10000[...]

3-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting DC Power to the Cisco uBR10012 Router Connecting DC Power to the Cisco uBR10012 Router This section descri bes ho w to connect the Cisco uBR10012 router to the tw o –48/–60 VDC po wer sources that pro[...]

3-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting DC Power to the Cisco u BR10012 Router Recommended Tools and Supplies Ta b l e 3-3 lists the tools and sup plies that you n eed to connect the Cisco uBR1001 2 router to DC pow er sources. Connecting the [...]

3-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting DC Power to the Cisco uBR10012 Router Figur e 3-22 Location of the DC Po w er Co nnectors and Alarm Connections Step 6 Connect the return wire (R TN) to the top terminal in the terminal block (see Figure [...]

3-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting Alarm Indicato rs Step 11 If you are not connecting an y alarm indicators, go to the “Connecting the Consol e Port and Auxiliary Port” section on page 3-49 to continue t he installation. Figur e 3-23[...]

3-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting Alarm Ind icators Recommended Tools and Supplies Ta b l e 3-4 lists the tools and supplies that you need to connect the alarm indicators. Connecting the Alarm Indicators Use the fol lowin g procedure to c[...]

3-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting Alarm Indicato rs Caution Figure 3-25 sho ws the wiring config uration for NO al arm relays. The wiring config uration for NC alar m relays is similar b ut uses the NC contacts. Step 4 Repeat step 3 for [...]

3-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Reinstalling the Modules Reinstalling the Modules Reinstall all the components that were remo ved fro m the chassis. Recommended Tools and Supplies Ta b l e 3-5 lists the tools and supplies that you need to reinst a[...]

3-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Reinstalling the M odules Reinstalling the DC Power Entry Modules Step 1 Position the f irst DC PEM in th e pow er bay and push it forw ard, verif ying that it goes all the w ay in and makes a s ecure connecti on w[...]

3-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Reinstalling the Modules Reinstalling the AC Power Entry Modules If you are replaci ng DC PEMs with A C PEMS or replaci ng a redundant A C PEM, see Remo ving and Replacing DC Po wer Entry Modu les, page 5-8 an d Rem[...]

3-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Reinstalling the M odules Note When you turn on the po wer switch on th e A C PEM, the F ault LED should go of f and the PO WER LED should come on (green) . Figur e 3-29 Replacing the AC PEM Step 8 If you are i nst[...]

3-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Reinstalling the Modules Figur e 3-30 Routing the A C Cables ALARM S C ISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R N E T L I N K A C T I V I T Y A U X S L O T [...]

3-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Reinstalling the M odules Reinstalling the Line Cards and Uplink Cards After the chassis has been firmly attached to the rack, reinstall th e c ards in the chassis (also see Removing and Replacin g a Cable Interfac[...]

3-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Reinstalling the Modules Figur e 3-31 Inserting the Cisco uBR1 0-MC5X 20S/ U/H Cable Interf ace Line Car d 72325 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1 4 U [...]

3-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Reinstalling the M odules Figur e 3-32 Closing the Ejector Lev ers 72326 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1 4 U S 1 5 U S 1 6 U S 1 7 U S 1 8 U S 1 9 D[...]

3-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card This section descri bes how to install the line card in the Cisco uBR1[...]

3-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Installing the Slot Splitter a nd Half-Height Gigabit Etherne t Line Card Figur e 3-33 HHGE Line Card Locations 135149 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S[...]

3-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Figur e 3-34 Inserting the Slot Split t er 135151 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 [...]

3-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Installing the Slot Splitter a nd Half-Height Gigabit Etherne t Line Card Figur e 3-35 Captive Scr ew Locations War ni ng Blank faceplates and c over panels serve three important functions: they prevent ex posure t[...]

3-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Installing the Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to install a HHGE line card into an installed slot splitter[...]

3-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Installing the Slot Splitter a nd Half-Height Gigabit Etherne t Line Card Step 4 Be sure the ejectors are in the open position (as sho wn) and continue to push the line card into t he splitter until you can feel it[...]

3-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Figur e 3-38 Captive Scr ew Locations Step 7 Secure the line card in the slot sp litter by tighteni ng the top and bottom capti v e screw s ( [...]

3-49 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting the Consol e Port and Auxiliary Po rt Connecting the Console Port and Auxiliary Port The PRE module on the Cisco uBR10012 router has tw o asynchronou s seri al (EIA/TIA-232) RJ-45 ports that pro vide con[...]

3-50 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Console Port and Auxiliary Port Figur e 3-39 Console P ort Connec tio n on the PRE Modu le Step 2 Run the other end of the crosso ver cabl e through the squa re hole at the left front side of the chas[...]

3-51 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting the Consol e Port and Auxiliary Po rt Connecting to the Auxiliary Port The auxiliary port provides a conn ection for a modem to allo w remo te access to the router an d its command-line interface (CLI). [...]

3-52 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting Networ k Management Cables Connecting Network Management Cables The Cisco uBR10012 router has connections t o both the internal Eth ernet management network an d the external da ta network. The internal E[...]

3-53 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting Netw ork Management Cable s Ti p When power is applied to the cha ssis, check the LNK (Link) LED on the PRE faceplate port next to the Ethernet port. This LED lights (green) if the PRE is correctly conne[...]

3-54 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting Networ k Management Cables Caution If the Cisco uBR10012 router is used in an en vironment in w hich lightning-indu ced transients are likely to couple to the signal lines, use of shielded interconnection[...]

3-55 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting Cable Interface Lin e Cards and Network Uplink Cards Connecting Cable Interface Line Cards and Network Uplink Cards Because there are very specific requirements for cablin g the d if ferent line c ards a[...]

3-56 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Connecting Cable Interface Line Cards and Network Uplink Cards Note If you hav e completed all cable connections, go to the “Replacing the Front Co ver” section on page 3-58 to continue the installation. If you [...]

3-57 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Connecting Cable Interface Lin e Cards and Network Uplink Cards Caution Make sure your fiber optic connecto rs are clean and debris free. Refer to Inspection and Cleaning Pr ocedur es for F iber-Optic Connections a[...]

3-58 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Replacing the Fro nt Cover Figur e 3-46 Gigabit Ethernet Cable Management Step 6 If you ha ve compl eted all cable connections, go to the ne xt section, “Replacing the Front Cov er” to continue the installatio n[...]

3-59 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Replacing the Front Cover Figur e 3-47 Attac hing the Cov er to the Chassis Step 2 Continue with the “Po wering On the System” section to co ntinue the inst allation. 56423 POWER MISWIRE FAU LT ALARMS CISCO 100[...]

3-60 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Powering On the System Powering On the System After all of the interfaces and other cables are connec ted, perform a visual check of all connections and then check that: • The ejector lev ers on each line ca rd ar[...]

3-61 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Powering On th e System Figur e 3-48 Cisco uBR1 0 0 12 Rout er DC PE M P o wer Switc hes (On P o sition) Step 5 V erify that all LEDs are lighting properly : a. The Pow er LED on each DC PEM should light (green), i[...]

3-62 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Configuring the Cisco uBR10012 Router at Startup Configuring the Cisco uBR10012 Router at Startup This section explains ho w to creat e a basic running conf iguration for your Cisco uBR100 12 router using the Cisco [...]

3-63 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Configuring the Cisco uB R10012 Router at Startup Basic Configuration Using the Setup Facility The first t ime you po wer on a Cisco uBR10012 router , th e setup facility starts. Y ou can also initiate the facili t[...]

3-64 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Configuring the Cisco uBR10012 Router at Startup Step 4 Specify a secret password. It appears in encrypted form in the conf iguration f ile. Enter enable secret: my_secret Step 5 Specify the enab le password. It is [...]

3-65 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 3 Installin g the Cisco uBR10012 Router Configuring the Cisco uB R10012 Router at Startup Step 5 Specify the I P address. IP address for this interface: 172.27.48.209 Step 6 Enter the subnet mask for the IP address. Subnet mask for this interface [255.25[...]

3-66 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 3 Installing the Cisco uBR10012 Router Formatting PC Media Cards Y ou can now conf igure the line cards. F or specific in formation on system and interface configuration, refer to the Cisco uBR10012Universal Br oadband Ro uter Softwar e Conf igur ation G[...]

CH A P T E R 4-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 4 Troubleshooting the Installation This chapter pro vides basic troubleshooting inf ormation to solve the most common installation problems with the Cisco uBR10012 uni versal b roadband router . Y our Cisco uBR10012 router went th rough extensi v e t[...]

4-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Troubleshooting Methods Troubleshooting Methods This section descri bes the troubleshooting meth ods used in this chap ter and describes ho w Cisco uBR10012 routers are d ivided i nto subsyste ms for more ef f icient p [...]

4-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 4 Troubl eshooting the Installation Troubleshooting Installation Proble ms General Troubleshooting Tips All Cisco uBR10012 router FR Us (f ield replaceable un its) are hot-swapable. Procedures fo r removing and replacing the FR Us can be found in Chapter [...]

4-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Troubleshooting Ethernet Connections Troubleshooting Ethernet Connections If an Ethernet conn ection to your Cisco uBR10012 router f ails to wo rk properly , and the correspo nding LNK (Link) LED is not on , check for t[...]

4-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 4 Troubl eshooting the Installation Troubleshooting th e Console Port Serial Connection Enter configuration commands, one per line. End with CNTL/Z. router(config-if)# int fast0/0/0 router(config-if)# no shut router(config-if)# exit router(config)# exit r[...]

4-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Identifying Startup Problems Identifying Startup Problems Startup prob lems are commo nly due to the source power or to a line card that is not properly seated in the router . Although an ov ertemperature conditi on is [...]

4-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem Troubleshooting the Power Subsystem A C po wer entry modules, DC po wer entry modules, or an A C po wer shelf combined wit h the DC po wer modules are used to po wer the Cisco uBR1001[...]

4-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Troublesho oting the Power Subsyste m Step 4 If none of the above suggestions correct the proble m, t he A C PEM could be faulty . Contact a service representati ve for further instructions. See the “Obtaining Do cume[...]

4-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem c. If the DC PEM LED is still of f, turn of f the DC po wer source and th en verify that t he DC power source is correctly wired to the terminal blocks under neath each DC PEM. See th[...]

4-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Processor Subsystem – The “External A C Supply Fault” message indicates that one of the power mod ules is reporting either a faul t, an ov er-temp erature condition, or i s missing. Check th e[...]

4-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 4 Troubl eshooting the Installation Troubleshooting the Cooling Su bsystem The sequence on the redundant PRE is simi lar , except t hat the ST A TUS LED remains OFF and the messages on the alphanumeric display are sli ghtly dif ferent. The f inal message[...]

4-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Troublesho oting the Line Cards Step 2 Is the System OK LED on the fa n assembly module green and the other tw o LEDs (Single Fa n Failure and Multiple Fan Failure) of f? a. If yes, the system is operating n ormally . [...]

4-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 4 Troubl eshooting the Installation Troubleshooting the HHGE Insta llation Step 3 For all f iber optic connections, verify that the connections are clean. See Cleaning and Checking the Bulkhead Optical Connect ors and Cleaning and Inspecti ng the F iber [...]

4-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 4 Troubleshoo ting the Installation Troublesho oting th e HHGE Installation The yello w F AIL LED blinks 1. The SFP GBIC has been rejected because: – An internal fault is detected. – Not a Gigabit Ethernet S FP . – Not a Cisco SFP . – T wo SFPs w[...]

CH A P T E R 5-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 5 Maintaining the Cisco uBR10012 Router The Cisco uBR10012 uni versal br oadband router is conf igur ed t o your order and ready for inst allation when it arri ves. After you instal l the system, you may ha ve to perform specif ic maintenance procedu[...]

5-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Shutting Down the System System components f all into two cate gories: hot-sw appable components that do not require you to po wer off the system before repl acing them , and those co mponents that do require you to[...]

5-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the Front Cover Removing and Replacing the Front Cover The Cisco uBR10012 router is equi pped with a plastic front co v er that ensures proper ai rflow t hrough the system and protects the ca[...]

5-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing the Front Cover Replacing the Front Cover Use the following procedure to repl ace the front co ver on the chassis. Step 1 Slide the cov er onto the four corner po sts of the ch assis and then[...]

5-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing th e Air Filter Replacing the Air Filter If the air f ilter is dirty or clogged, the f an assembly module coul d hav e a problem pro viding suf ficient cooling airflo w throughout the chassis, causing the[...]

5-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the Fan Assembly Module Figur e 5-4 Air Filt er Insert ed int o the Fr ont Co ver Step 5 Replace the front cover (see “Replacing the Front Cov er” ). Removing and Replacing the Fan Assembl[...]

5-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing the Fan Assembly M odule Caution The Cisco uBR10012 chassis should not be run w ithout a working f an assembly module for more t han three minutes. T o prev ent the possibility of t he syste[...]

5-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing DC Power Entry Modules Removing and Replacing DC Power Entry Modules The Cisco uBR10012 router is shi pped with two DC po wer entry modul es (PEM) that provide a redundant po wer supply to the[...]

5-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing DC Power Entry Modules Step 4 (Optional) T urn of f the DC po wer source that is pr o viding po wer for this DC PEM. All LEDs on the DC PEM should turn of f. (This step is required only if y[...]

5-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing DC Power Entry Modules Figur e 5-7 Removing a DC PEM 56463 POWER MISWIRE F A UL T ALARM S C ISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R[...]

5-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing DC Power Entry Modules Figur e 5-8 DC P ow er Connection Replacing the DC PEM Step 1 V erify that the power switch on the replacem ent DC PEM is in the off position (see Figure 5-6 ). Ti p [...]

5-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing DC Power Entry Modules Figur e 5-9 Installin g a DC PEM Step 3 If necessary , turn on the DC powe r source th at is provid ing po wer for this DC PEM. The F A UL T LED on the replacement DC P[...]

5-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing DC Power Entry Modules Figur e 5-1 0 Set ting the DC P o w er Switc h t o the On P osition Step 6 Replace the front cover (see “Replacing the Front Cov er” ). Replacing Both DC PEMs Use[...]

5-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing DC Power Entry Modules Figur e 5-1 1 T urning Off the DC PEM Step 4 T urn off the DC power source that is providi n g power for each DC PEM. All LEDs on th e DC PEM should turn off. Ti p Sepa[...]

5-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing DC Power Entry Modules Figur e 5-12 Removing a DC PEM Step 6 If the MISWIRE LED indicated th at the DC power source is misw ired verify that the w ires leading t o the DC po wer source are [...]

5-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing DC Power Entry Modules Figur e 5-13 DC P o wer Connectio n Location War ni ng Use copper conductors only . Statement 1025 Step 7 V erify tha t the po wer switch on each replacemen t DC PEM is[...]

5-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing DC Power Entry Modules Figur e 5-14 Installing a DC PEM Step 11 T urn on the DC po wer sources that are pro viding po wer for the DC PEMs. The F A UL T LED on e ach replacement DC PEM light[...]

5-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Connecting Alarm Ind icators Connecting Alarm Indicators The Cisco uBR10012 router pro vides relay contacts for o ptional (customer -supplied) audibl e or visual alarm indicators. Relay contacts are prov ided for t[...]

5-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Connecting Alarm Indicato rs War ni ng Before performing any of the following procedu res, ensure that power is removed from the DC circuit. T o ensure that all power is OFF , locate the circuit breaker on the pan[...]

5-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Connecting Alarm Ind icators Step 5 Secure the cabling to the chassis b y feeding a tie wrap t hrough one of the rou nd holes ne xt to the lar ge hole on the sid e of the chassi s. Then use th e tie wrap to bind th[...]

5-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing AC PEM Modules Removing and Replacing AC PEM Modules The Cisco uBR10012 router ships with two A C po wer entry modules (PEMs) . In this redundant system, (2 po wer supplies), one A C PEM pro[...]

5-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing AC PEM Modules Replacing a Redundant AC PEM Follo w this procedure to replace a redu ndant A C PE M, which is typically needed when the F A UL T LED is on and the tro ubleshooting steps in t[...]

5-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing AC PEM Modules Figur e 5-19 Removing the A C PEM Step 5 V erify that the power switch on the replacemen t A C PEM is in the standby position (see Figure 5-18 ). 62523 POWER F A UL T ALAR M S[...]

5-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing AC PEM Modules Figur e 5-20 Installing the AC PEM Step 6 Position the replacement A C PEM in the power bay and push it forward, ve rifying that it goes all the way in and makes a secure co n[...]

5-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing AC PEM Modules Figur e 5-21 Routing the AC P o wer Cables Step 10 Plug the other end of the A C-input power cable i nto a 200–240 V A C power outlet. F or fully redundan t operation, each [...]

5-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing AC PEM Modules Figur e 5-22 Settin g AC P o we r Switc h to the ON P osition Step 12 When you turn on the po wer switch on the A C PEM, the F A UL T LED goes of f and the PO WER LED goes on [...]

5-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing AC PEM Modules Figur e 5-23 Tur ning the AC PEM Of f Step 3 Unplug the A C-in put pow er cable from the power plug on the front panel of each A C PEM. For safety , also unplug th e other end[...]

5-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing the PRE Module The F A UL T LED on each replacement AC PEM is yello w to indicate that the A C PEM is recei ving po wer from the po wer source b ut is not yet su pplying po wer to the Cisco [...]

5-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-25 Loosening the Captive Scr e ws Step 6 Simultaneously pi v ot both eject or lev ers aw ay from each other to diseng age the PRE module from t he backplane (see Fig[...]

5-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing the PRE Module Figur e 5-26 Opening the Ejector Levers Step 7 Slide the PRE module o ut of the slot and pl ace it on an antistatic surface, or in an antistatic bag (see Figure 5-27 ). ALAR M[...]

5-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-27 Removing the PRE Module from the Chassis Step 8 If you are install ing a ne w or replacement PRE module, proceed t o the next step. Oth erwise, install a bl an k [...]

5-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing the PRE Module Replacing the PRE Module When replacing a PRE1 module with a PRE2 module, you must also install EMI gaskets and RF absorber material, for more information, go to the fol lowin[...]

5-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-29 Closing the Ejector Lev ers Step 5 When fully inserted, the PRE module c ycles through its p ower -on self-t est. The F AIL LED stays on briefly (about 5 to 6 se [...]

5-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Installing a PC Media Card Removing and Installing a PC Media Card Use the follo wing procedure to rem o ve and install a PC media card. Note The Cisco uBR10012 router uses PC media cards that are a mi[...]

5-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and In stalling a PC Medi a Card Figur e 5-31 Removing the PC Media Card Step 3 Insert the ne w PC media card in to on e of the card slots on the PRE (see Figure 5-32 ). Figur e 5-32 Inserting the PC Medi[...]

5-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing a Timing, Communication, and Control Plus Card Removing and Replacing a Timing, Communication, and Control Plus Card Use the follo wing procedure to install a ne w T iming, Communicat ion, a[...]

5-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing a Timing, Communication, and Control Plus Card Figur e 5-34 Removing the TCC+ car d Step 7 If you are install ing a replacement card, proceed to the ne xt step. Otherwise, install a bl ank c[...]

5-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing a Timing, Communication, and Control Plus Card Figur e 5-35 Inserting the TCC+ Car d Step 10 Secure the line card in the chassis by tighte ning the top and bottom capti ve scre ws (see Figur[...]

5-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Removing and Replacing a Network Line Card Use the follo wing procedure to in stall a ne w network li ne card, or to remov e or replace an e xisting network line card in[...]

5-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing a Network Line Card Figur e 5-36 Loosening the Captiv e Screws Step 3 If installing a ne w lin e card in a blank slot, remo ve the blank slo t cov er and discard. Othe rwise, disconnect th e[...]

5-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Figur e 5-37 Opening the Ejector Levers Step 6 Slide the card out of the slot and place it on an an tistatic surf ace, or in an antistatic b ag (see Figure 5-38 ). 10349[...]

5-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing a Network Line Card Figur e 5-38 Removing the Networ k Line Car d Step 7 If you are installing a ne w or replacement card, proceed to the next step. Otherw ise, install a blank co ver ov er [...]

5-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Installing the Network Line Card Note For proper cooling and airflo w , a blank card cover must alw ays be installed in a blank line card slot. The product order number [...]

5-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing a Network Line Card Step 3 Simultaneously pi v ot both eject or lev ers to ward each ot her (until the y are parallel to the f aceplate) to firmly seat the card in the backplane (see Figure [...]

5-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethe rnet Line Card and the Slot Splitter Step 7 Config ure the network li ne card if necessary (see the “Fo rmatting PC Media Cards” sectio n on page 3-66 , or refer to the C[...]

5-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitter Figur e 5-41 Captive Scr ew Locations Step 3 Loosen the top and bottom capti ve scre ws until they disengage and spring a w ay from the fac[...]

5-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethe rnet Line Card and the Slot Splitter Figur e 5-42 Opening the Ejector Levers Caution Do not operate the system unless a ll slots contain a line card or a blank faceplate. Alw[...]

5-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing the Half-Height Gigabit Et hernet Line Card and the Slot Splitter Removing the Slot Splitter Use the follo wing procedure to remo ve a slot splitter from the chassis: Step 1 Attach an antistatic wrist stra[...]

5-49 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethe rnet Line Card and the Slot Splitter Step 4 Slide the splitter ou t of the slot ( Figure 5-44 ). Step 5 If you are not installing a rep lacement splitter or a lin e card, ins[...]

5-50 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Replacing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card This section descri bes how to install the line card in the Cisco uBR1[...]

5-51 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Figur e 5-45 Inserting the Slot Split t er Step 2 Grasp the front of the slot splitte r with one hand and place your other hand under the [...]

5-52 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Figur e 5-46 Captive Scr ew Locations Step 4 Secure the slot splitter to the chassis b y tightening the to p and bottom capti ve scre ws ( Fig[...]

5-53 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Installing the Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to install a HHGE line card into an installed slot spli[...]

5-54 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card Step 4 Be sure the ejectors are in the open position (as sho wn) and continue to push t he line card into the splitter until you can feel it b[...]

5-55 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Figur e 5-49 Captive Scr ew Locations Step 7 Secure the line card in the slot sp litter by tighteni ng the top and bottom capti v e screw [...]

5-56 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing an SFP Module Removing and Replacing an SFP Module Y our HHGE line card is shipped with an SFP module inst alled. Use the procedures in this section if you need to change the SFP module: •[...]

5-57 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing an SFP M odule Figur e 5-51 Disconnecting the LC -type Fiber -Optic Cable Step 2 Disconnect the fiber -optic cabl e connector from the SFP module ( Figure 5-51 ). Note which cable connector [...]

5-58 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing an SFP Module Step 3 Unlock and remov e the SFP module as follo ws: a. Mylar T a b SFP Modules—Gently , but f irmly pull the plastic tab to free the locking pin and remov e the SFP module [...]

5-59 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Upgrading to a Half-Height Gigabit Ethernet Line Card Step 3 Remov e the dust plug from the SFP module optical ports and plug the LC-type f iber -optic cable connector into the SFP module (see Figur e 5-53 ). Upgr[...]

5-60 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Lin e Card Removing and Replacing a Cable Interface Line Card Use the following procedure to install a ne w cable interface line card, or to remove or replace an existing ca[...]

5-61 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing a Cable In terface Line Card Figur e 5-54 Captive Scr ews, Eject or Levers Step 5 Simultaneously pi vot both ejector lev ers aw ay from each other to disengage the cable interface line c ar[...]

5-62 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Lin e Card Figur e 5-55 Removing the Cabl e Interf ace Line Car d Step 7 If you are installing a ne w or replacement cable interface line card, proceed to the next step. Oth[...]

5-63 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing an d Replacing a Cable In terface Line Card Installing a Cable Interface Line Card Step 1 Grasp the faceplate of the new cable interf ace line card with one hand and place your other hand under the card c[...]

5-64 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Lin e Card Figur e 5-57 Closing the Ejector Lev ers Step 4 Secure the cable interface line card in the chassis by tightening t he top and bottom capti ve screw s (see Figure[...]

5-65 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the Cable Interface Line Card in the Adapter Card Step 6 Connect all downstream and upstream coaxial cable s to the cable interface line card as necessary . Step 7 Configure the cable interf[...]

5-66 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing the Cable Interfa ce Line Card in the Ada pter Card Figur e 5-58 Cisco uBR1 0-LCP2-MC2 8C Cable Interf ace Line Card Step 3 Loosen and remo ve the tw o sets of retaining nuts and w ashers on[...]

5-67 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-01 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the Cable Interface Line Card in the Adapter Card Figur e 5-59 Using the Ejector Levers t o Remove the Line Car d fr om the Adapt er Card Figur e 5-60 Removing the Cisco MC28C Line Car d fro[...]

5-68 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replac ing the Cable Interfa ce Line Card in the Ada pter Card Installing a Cable Interface Line Card in the Adapter Card Step 1 Using the handle on the ne w or replacement Cisco MC xx card, align the [...]

A-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-01 APPENDIX A Technical Specifications This appendix pro vides speci fications i nformation about the Ci sco uBR10012 router , rou ter components, and cards used in the router . • Cisco uBR10012 Chassis and Chassis Components, page A-1 • Network Uplin k Cards and[...]

A-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specificatio ns Cisco uBR10012 Chassi s and Chassis Components DC Power en try modules (PEM) Pow er supply monitoring cable Supports two separate input feeds (–48 to –60VDC) by means of b uilt-in two -position terminal blocks. Part Number[...]

A-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specifications Cisco uBR10012 Chassi s and Chassis Components A C po wer shelf 2400W A C-input power shelf and DC PEM bund le UBR10-PWR-A C-EXT= • Chassis dimensions Height: 3.46 in. (87.9 cm) W idth: 19 in. (4 82.26 cm) Depth: 12.00 in. (3[...]

A-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specificatio ns Cisco uBR10012 Chassi s and Chassis Components LCD module • P art number: mo dule–UBR10-DSPL= Part number: cable–UBR10-DSPL-CAB= • Pow er consumption: 2W 2 (6.824 BTU 3 ) per hour • W e ight: 0.4 lb (0.1814 kg) • H[...]

A-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specifications Cisco uBR10012 Chassi s and Chassis Components PRE PC media card options PRE4 CompactFlash Disk options PRE DRAM memory options • Slot 0, Slot 1 • Disk0 512 MB—Par t Number: ESR-PRE-CF-512MB(=) 1 GB—Par t Number: ESR-PR[...]

A-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specificatio ns Network Uplink Ca rds and Cable Interfac e Line Cards Network Uplink Cards and Ca ble Interface Line Cards Ta b l e A-2 l ists the physica l specifications for the cards used with the Cisco uBR1 0012 router . Ta b l e A -2 Car[...]

A-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specifications Network Uplink Cards an d Cable Interface Line Cards SFP optical po wer budget— 1000Base-LX/LH GBIC • Power b udget: 7.5 dB (multimo de fiber), 8 dB (sin gle mode) • T ransmit po wer: –11 .5 to -3 dBm (multimode f iber)[...]

A-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specificatio ns Network Uplink Ca rds and Cable Interfac e Line Cards Cisco uBR10-LC P2-uBR-MC28C cable i nterface line card • UBR10-LCP2-MC28C , UBR10-LCP2-MC28C= • Pow er consumption: 110 W 1 (375.3 BTU 2 ) • W eight:12 lb (5.4 4 kg) [...]

A-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specifications Network Uplink Cards an d Cable Interface Line Cards Cisco uBR10-MC5X20S/U c able interface line cards • Cisco UBR10-MC5X20S= • Cisco UBR1 0-MC5X20U= • Pow er consumption: 185 W 1 (631.2 BTU 2 /hr) • W eight:16 lb (7.26[...]

A-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix A Technical Specificatio ns Network Uplink Ca rds and Cable Interfac e Line Cards 4. Whitesands Engineering at the following URL: http://ww w.whitesand sengineering.com/ (Asheridge Communications Limited is the European and Middle Eastern partner for Wh[...]

B-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-01 APPENDIX B Cable Specifications This appendix pro vides the follo wi ng cabling and pinout i nformation for the Cisco uBR10012 rou ters. • Coaxial Ca bles, page B-1 • Console and Auxiliary Port Cables and Pinouts, page B- 2 • Fast Ethern et Port Cables and P[...]

B-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Sp ecifications Console and Auxiliary Port Cables and Pinouts Note Any of the three of the coaxial cables listed can be used to connect a Cisco cable interface card to the HFC network ; howe v er , the consi stent use of 59-ser ies cable is prefe[...]

B-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Specifications Console and Auxilia ry Port Cables and Pinouts Figur e B-2 Rollo ver Cable Figur e B-3 RJ-45 Rollov er Ca ble Identificatio n The colored wires at one connector are in the re verse order at the other connector (re v erses pins 1 an[...]

B-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Sp ecifications Fast E thernet Port Cables and Pi nouts Auxiliary Port Cables and Pinouts Use the RJ-45-to-RJ-45 rollov er cable and RJ-45- to-DB-25 male DCE adapte r (labeled MODEM) to connect the auxiliary port to a modem. Ta b l e B-2 lists th[...]

B-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Specifications Fast Ethernet Port Cables and Pino uts • Use a Category 3 UTP straight-thr ough cable when connecting to a PC or other Ethernet de vice. • Use a Category 5 UTP crosso ver cable when connecting 100Base-TX to a hub. • Use a Cat[...]

B-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Sp ecifications Fast E thernet Port Cables and Pi nouts How to Identify an RJ-45 Straight-Through Cable Y ou can identify a Straight-through cable by comparing the two modula r ends of the cable. Hold the cables side-by-side with the tab at the b[...]

B-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Specifications Connecting a Cable to a n RJ-45 Connector Connecting a Cable to an RJ-45 Connector Use the follo wing information to build your o wn cables with RJ45 connectors. Tools • Category 3cable o r Category 5 cable • RJ45 connectors ?[...]

B-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Sp ecifications Fiber-Optic Cables an d Connectors Figur e B-8 Installing Cable in an RJ45 Connector Fiber-Optic Cables and Connectors The follo wing warnin gs apply when you wo rk with fi ber-optic cabl es and ports. War ni ng Invisible laser ra[...]

B-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Specifications Fiber-Optic Cables and Con nectors For SONET or SDH single-mode and mult imode fiber -optic connecti ons, use one duple x SC-type connector ( Figure B-9 ) or two si mplex SC-type co nnectors. (See Figure B-10 . Figur e B-9 Duplex S[...]

B-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix B Cable Sp ecifications Fiber-Optic Cables an d Connectors[...]

C-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-01 APPENDIX C Frequency Allocation This appendix pro vides informati on on broad cast and cable television NTSC and P AL/SECAM standards and frequencies used around th e world. There are three standards for transmit ting video. They are defined b y the method of enco[...]

C-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation Standards Comparison s Standards Comparisons The follo wing tables ( Ta b l e C-1 , Ta b l e C-2 , and Ta b l e C-3 ) include data from Recommendation ITU-R BT .470.6, Con v entional T elevision Syst ems (1998) and pro vide a comp[...]

C-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s T- 9 none 17.75- 23.75 19 10.75 23.5 N/A N/A N/A N/A T- 1 0 none 23.75-29.75 25 26.75 29.5 N/A N/A N/A N/A T- 1 1 none 29.75-35.75 31 32.75 35.5 N/A N/A N/A N/A T- 1 2 none 3[...]

C-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation NTSC Cable Television Ch annels and Relative Freque ncies J 23 216.0-222.0 217.25 21 9.0 221.75 217.2625 211.7625 216.0108 220.5108 K 24 2 222.0-228.0 22 3.25 225.0 227.75 223.2625 227.7625 222.0111 226.511 1 L 25 2 228.0-234.0 22[...]

C-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s VV 58 426.0-432.0 427.25 429 .0 431.75 427.2625 431.7625 426.0213 430 .5213 WW 59 432.0-438.0 433.25 435 .0 437.75 433.2625 437.7625 432.0216 436 .5216 XX 60 438.0-444.0 439.[...]

C-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation NTSC Cable Television Ch annels and Relative Freque ncies 93 636.0-642.0 637.25 63 9.0 641.75 637.2625 641.7625 636.0318 640.5318 94 642.0-648.0 643.25 64 5.0 647.75 643.2625 647.7625 642.0321 646.5321 100 648.0-654.0 64 9.25 651.[...]

C-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s 133 846.0-852.0 84 7.25 849.0 851.75 847.2625 851.7625 846.04 23 850.5423 134 852.0-858.0 85 3.25 855.0 857.75 853.2625 857.7625 852.04 26 856.5426 135 858.0-864.0 85 9.25 86[...]

C-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation NTSC (M) Cable Televisio n Channel Frequencies for Japan NTSC (M) Cable Television Channel Frequencies for Japan Japan uses NTSC (M) with different channel assignments. Ta b l e C-5 Japanese Channel Assignments Channel Number Band[...]

C-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation NTSC (M) Cable Te levision Channel Frequenc ies for Japan C33 282.0-288.0 283 .25 285.00 287.75 C34 288.0-294.0 289 .25 291.00 293.75 C35 294.0-300.0 295 .25 297.00 299.75 C36 300.0-306.0 301 .25 303.00 305.75 C37 306.0-312.0 307 .[...]

C-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation NTSC Cable Television Ch annel Frequencies for the Republic of Korea NTSC Cable Television Channel Frequencies for the Republic of Korea K orea uses NT SC (VHF , UHF) with different channel assignments. Ta b l e C-6 Korean Channe[...]

C-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation NTSC Cable Television Channel Fr equencies for the Republic of Ko rea 14 120.0-126.0 121.25 123 .0 125.75 CA TV 15 126.0-132.0 127.25 129 .0 131.75 16 132.0-138.0 133.25 135 .0 137.75 17 138.0-144.0 139.25 141 .0 143.75 18 144.0-1[...]

C-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation NTSC Cable Television Ch annel Frequencies for the Republic of Korea 32 1 270.0-276.0 271 .25 273.0 275.75 CA TV 33 1 276.0-282.0 277 .25 279.0 281.75 34 1 282.0-288.0 283 .25 285.0 287.75 35 1 288.0-294.0 289 .25 291.0 293.75 36[...]

C-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation NTSC Cable Television Channel Fr equencies for the Republic of Ko rea 67 480.0-486.0 481.25 483 .0 485.75 CA TV 68 486.0-492.0 487.25 489 .0 491.75 69 492.0-498.0 493.25 495 .0 497.75 70 498.0-504.0 499.25 501 .0 503.75 71 504.0-5[...]

C-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation PAL/SECAM Cable Television Cha nnels and Relative Freq uencies PAL/SECAM Cable Television Channels and Relative Frequencies Ta b l e C-7 provides information on the Phase Alternating Line (P AL) and SEquentia l Couleur A vec Memo[...]

C-15 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation PAL/SECAM Cable Television Chann els and Relative Frequencies S4 125.0-132.0 126.25 131 .75 S5 132.0-139.0 133.25 138 .75 S6 139.0-146.0 140.25 145 .75 S7 146.0-153.0 147.25 152 .75 S8 153.0-160.0 154.25 159 .75 S9 160.0-167.0 161[...]

C-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation PAL/SECAM Cable Television Cha nnels and Relative Freq uencies S31 382.0-390.0 383.25 388 .75 S32 390.0-398.0 391.25 396 .75 S33 398.0-406.0 399.25 404 .75 S34 406.0-414.0 407.25 412 .75 S35 414.0-422.0 415.25 420 .75 S36 422.0-4[...]

C-17 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation PAL SECAM (D/K) Cable Television Chan nel Fr equencies for the People ’s Republic of China PAL SECAM (D/K) Cable Television Channel Frequencies for the People’s Republic of China Note The downstream frequency plan in cludes al[...]

C-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation PAL SECAM (D/K) Cable Television Channel Fr equencies for the People’s Republic of China Ta b l e C-8 Cable T elev ision Channels and Relative Fr equencies, P AL D and K Channel Number Bandwidth (MHz) Visual Carrier (MHz) Aural[...]

C-19 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency Allocation PAL SECAM (D/K) Cable Television Chan nel Fr equencies for the People ’s Republic of China Z29 393.0-399.0 392.25 398 .75 Z30 400.0-407.0 400.25 406 .75 Z32 408.0-415.0 408.25 414 .05 Z32 416.0-423.0 416.25 422 .75 Z33 424.0-431[...]

C-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix C Frequency A llocation PAL SECAM (D/K) Cable Television Channel Fr equencies for the People’s Republic of China DS34 679.0-686.0 679 .25 685.75 DS35 687.0-694.0 687 .25 693.75 DS36 695.0-702.0 695 .25 701.75 DS37 703.0-710.0 703 .25 709.75 DS38 711.0[...]

D-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-01 APPENDIX D Manufacturers for Headend Provisioning Requirements Ta b l e D-1 and Ta b l e D-2 pro vide contact information fo r manufacturers, we b sites, and product of ferings required to prepar e and provisio n a Nort h American cable headend site for two- way d[...]

D-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix D Manu facturers fo r Headend Provisionin g Requirements North American Channel Plans In addition, Cisco recommends the foll owing man ufacturers, web sites, and product of fering s for v arious measurement de vices you will need to prepare and pr ovisio[...]

D-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix D Manufacturers for Headend Provisio ning Requirements European Channe l Plans European Channel Plans In addition, Cisco recommends the foll owing manufactur ers, w eb sites, and product of ferings for v arious measurement de vices you will need to prepa[...]

D-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Appendix D Manu facturers fo r Headend Provisionin g Requirements Cisco uBR10-MC5X20S/U Cable Kits and Tools Cisco uBR10-MC5X20S/U Cable Kits and Tools Ta b l e D-4 Manuf actur ers f or European Headend Measur ement Devices Manufacturer W eb Site or Phone Number [...]

GL-1 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 GLOSSARY S ymbols 1+1 APS See APS . 10Base-T 10 -Mbps baseband Ethernet specif ication using t wo pair s of twist ed-pair cabling (Cate gory 3, 4, or 5): one pair for transmitting data and the other for rece i ving data. 10Base-T , which is part of the IEEE 802.[...]

Glossary GL-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 A AAL A T M adaptation la yer . Service-dependent subla yer of the data link layer . Th e AAL accepts data from dif ferent ap plications and present s it to the A TM layer in the form of 48-b yte A TM payload segments. AALs consist of tw o sublayers:the[...]

Glossar y GL-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 B Backplane The circuit board at the back of the chassis that all component s plug into. It provides the physical connection between an in terface processor or l ine car d, and the data and po wer dist ributio n buses inside a chassis. Bellcore Bell Co[...]

Glossary GL-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 CO Central off ice. The local telephone comp any of f ice to which all lo cal loops in a gi ve n area connect and in which circuit switchi ng of subscriber lines occurs. Command Line Interface See CLI . Console Data terminal equipment (DTE) through whic[...]

Glossar y GL-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 E E1 W ide-area digital transmissio n scheme used predominantl y in Europe that carries data at a rate of 2.048 Mbps. E1 lines can be leased for priv ate use from common carriers. Compare with T1; see al so DS1. Edge Servic es Router See ESR . Electrom[...]

Glossary GL-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Frame Relay Industry-standard, switched data link layer protocol that handles mu ltiple virtual circuits using HDLC encapsulation between connected de vices. Fr ame Relay is more ef f icient th an X.25, the protoc ol for which it is g enerally cons ider[...]

Glossar y GL-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 IOS Internet Operating System. See Cisco IOS . IP Internet Protocol. Netw ork layer protocol in the TCP/I P stack of fering a connectionless in ternetwork service. IP provides features for addressing, type-of-service sp ecificatio n, fragmentation and [...]

Glossary GL-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 M M13 Generic term for equipment t hat multiplex es DS1s into DS3s. Sometimes used to describe a specif ic DS3 multiplex format. Some standards use this term to describe a synch ronous multiple xing format also kno w as SYNTRAN. In many cases M13 does n[...]

Glossar y GL-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Multicast Single packets copied by the netw ork and sent to a specific subset of ne twork addresses. Thes e addresses are specified in the Destin atio n Address fi eld. Compare with Broadcast and Unicast . Multilink Point-to-Point See MLP . Multimode f[...]

Glossary GL-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Optical carrier See OC . Optical fiber See Fiber-op tic cable . P Packet Logical grouping of information that incl udes a header containing contro l information and (usuall y) user data. Packets are most often used to refer to network layer units of da[...]

Glossar y GL-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 PRE Performance routing engi ne. The central routing unit for th e Cisco uBR10012 un i versal broadband router . The PRE performs all Layer 2 and Layer 3 packet m anipulation relat ed to routing and forwarding thro ugh the Cisco uBR10012 routers. Use [...]

Glossary GL-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 S SAR Segmentation an d reassembly . One of the two sublayers of the A AL common part con v er gence sublayer , responsible for dividing (at the source) and reassembling (at the destin ation) the protocol data units (PDUs) passed from the con ver gence[...]

Glossar y GL-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 T3 Digital W AN carrier facility . T3 transmits DS3-formatted dat a at 44.736 Mbps through the telephone switching network. TAC A Cisco T echnical Assistance Cente r . There are four T A Cs worldwide. TACACS T erminal Access Controller Access Cont rol[...]

Glossary GL-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 U UBR See Univ ersal Br oadband Rou ter . Unchannelized DS3 See Clear channe l DS3 . Unicast A message sent to a single network destinati on. Compare with Broadcast and Multicast . Universal Broadband Router A Cisco Cable Modem T ermination System (CMT[...]

Glossar y GL-15 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 Wide-area network See WA N . WRED W eighted Random Early Detection. RED uses an algo rithm to randomly discar d packets.The result of the drop is that the source detects the d ropped traf f ic and slows its transmission. WRED combines the capabilities[...]

Glossary GL-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01[...]

IN-1 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 INDEX Numerics 1000Base-LX/LH 1-38, A-6 1000BASE-SX A-6 1000Base-SX 1-37, A-6 1000Base-ZX 1-38, A-6 10BASE-T RJ-45 connector pinout s (table) B-6 A AC-input power shelf installati on 3-3 installing after installi ng the main chassis 3-23 AC PEM description 1-22,[...]

Index IN-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 flush rear-mounting (figure) 3-19 offset front-mounting ( figure) 3-20 brackets, cab le managem ent 3-21 C cable length, factors determining 2-9 cable management brackets, installing 3-21 cables attaching optional cable man agement brackets 3-21 simplex or[...]

Index IN-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 console port on PRE module 1-18 DC PEM 1-48 disposal w arning 1-12 downstream data path 1-4 Ethernet port on PRE mo dule 1-18 fan assembly module 1-48 features 1-7 front view with front cover(figure) 1-8 front view withou t front cover (figure) 1-9 functio[...]

Index IN-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 description 1-33 faceplate (figure) 1-33 installing and repl acing 5-60 LEDs 1-34 Cisco uBR10-SRP-OC12SML DPT WAN line card 1-42 cable specification (table) 1-45 faceplate (figure) 1-43 LEDs (table) 1-44 Cisco uBR-MC16x interface line card LEDs (table) 1-3[...]

Index IN-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 specifications A-2 surge suppression 2-8 troubleshooting 4-2 DC power connection location chassis terminal blocks (figure) 3-31, 5-11, 5-16 differences between the Cisco uBR10012 router and other Cisco CMTS platforms 1-48 digital signal level meter manufac[...]

Index IN-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 features, Cisco uBR1 0012 router 1-7 fiber-optic cables B-8 distance limits 2-9 transmission charac teristic s (table) 2-9 transmission rates 2-9 field replaceable unit, see FRU filter, replacing 5-1 frequency allocatio n NTSC C-1 NTSC (M) C-8, C-10 NTSC s[...]

Index IN-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 front cover (figure) 5-4 lifting c hassis 2-2 optional cable management brackets (figure) 3-21 PRE module 5-28 preparing for 2-10 site re quirement s 2-4 interference, radio frequency 2-8 IOS command line interface, see CLI IP address 4-5 router address 3-[...]

Index IN-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 M manufacturers European he adend provisio ning requirement s (table) D-3 North American head end provisioning requ irements (table) D-1 media cards formatting 3-66 memory devices on the C isco uBR1001 2 router 1-7 miswire LED 5-9, 5-15 modules Cisco uBR10[...]

Index IN-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 auxiliary port B-4 console port B-3 Fast Ethernet port B-4 plant wiring guidelin es 2-8 ports Fast Ethernet port on active PRE 1-12 gigabit Ethernet GBIC 1-36 OC-12 POS SC connector 1-41 PRE auxiliary 1-18, A-4 PRE console 1-18, A-4 PRE Ethernet 1-18, 3-54[...]

Index IN-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 connector pinout 10BASE- T (table) B-6 crossover cable identificat ion (figure) B-5 plug and receptacle (figure) B-2 rollover cable identification(fi gure) B-3 straight-through cabl e identification(figure) B-6 RJ-45-to-DB-9 console cable adapter (figure)[...]

Index IN-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 tools and suppli es for connecting the chassis ground 3-23, 3-26 tap manufact urers D-1, D-3 TCC+ card captive screws (figure) 5-36 description 1-36 external clock refe rence source 1-26 faceplate (figure) 1-26 installing a blank co ver in an empty slot 5[...]

Index IN-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-01 use copper conductors only 3-26, 3-29, 3-32, 5-9, 5-16, 5-19 wiring plant 2-8 practices 1-xi[...]