Français dropdown-ico

Cisco Systems UCS C200 M1 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Cisco Systems UCS C200 M1. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Cisco Systems UCS C200 M1 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Cisco Systems UCS C200 M1 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Cisco Systems UCS C200 M1 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Cisco Systems UCS C200 M1
- nom du fabricant et année de fabrication Cisco Systems UCS C200 M1
- instructions d'utilisation, de réglage et d’entretien de l'équipement Cisco Systems UCS C200 M1
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Cisco Systems UCS C200 M1 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Cisco Systems UCS C200 M1 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Cisco Systems en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Cisco Systems UCS C200 M1, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Cisco Systems UCS C200 M1, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Cisco Systems UCS C200 M1. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C20 0 S er v er Installation and S er vice Guide Cov ers UCS C20 0 Server Generations M1 and M2 Febr uary 22, 20 13 Text Part Number: OL -20732-02[...]

  • Page 2

    THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

  • Page 3

    iii Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 CONTENTS Preface vii Related Documentation vii Audience vii Organization vii Conventi ons viii Obtaining Documentation and Submitting a Serv ice Request xiii CHAPTER 1 Overview 1-1 CHAPTER 2 Installing the Server 2-1 Unpacking and Inspecting the Server 2-2 Preparing for Installat[...]

  • Page 4

    Contents iv Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Status LEDs 3-2 Front Panel LEDs 3-2 Rear Panel LEDs 3-4 Preparing for Component Installa tion 3-7 Required Equipment 3-7 Shutting Down and Powering Off the Server 3-7 Removing and Replacing the Server in a Rack 3-8 Removing and Replacing the Server Top Co ver 3-9 Removin[...]

  • Page 5

    Contents v Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Supported Powe r Cords and Plugs B-2 AC Power Cord Illustrations B-3 APPENDIX C RAID Controller Con siderations C-1 Supported RAID Controllers and Required Cabl es C-1 Enabling the Integrated In tel ICH1 0R RAID Con troller in the BIOS C-2 Enabling the Mezzanine Card RAID [...]

  • Page 6

    Contents vi Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02[...]

  • Page 7

    vii Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface This preface describes the audience, organization, and con v entions of the Cisco UCS C200 Server Installation and Service Gui de . It also provides in formation on ho w to obtain related documen tation. This guide co vers UCS C200 Serv er Generations M1 and M2. Differenc[...]

  • Page 8

    viii Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface Conventions This document uses the f ollo wing con ventions for no tes, cautions, and safety warnings. Notes and Cautions contain important in formation that you should k now . Note Means r eader take no te . Note s contain he lpful sug gestions o r refere nces to ma ter[...]

  • Page 9

    ix Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface Attention IMPORT ANTES INFORMA TIONS DE SÉCURITÉ Ce symbole d'avertissement indiq ue un danger . V ous vous trouvez dans une situation pouvant entraîner des blessures ou des do mmages corporels. A vant de travailler sur un équipement, soyez conscient des dangers l[...]

  • Page 10

    x Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface ¡Advertencia! INSTRUCCIONES IMPORT ANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, conside re los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar d[...]

  • Page 11

    xi Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os circuitos elétricos e[...]

  • Page 12

    xii Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface[...]

  • Page 13

    xiii Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface Obtaining Documentation and Submitting a Service Request For info rmation on obtaining documentation, sub mitting a service request, and gatheri ng additional information, see the mont hly What’ s New in Cisco Pr oduct Documentation , wh ich also lists all ne w and re [...]

  • Page 14

    xiv Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Preface[...]

  • Page 15

    CH A P T E R 1-1 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 1 Overview The Cisco UCS C200 Server , which is a part of th e Cisco UCS C-Series Rack-Mount serv er family , is designed to operate in a wide ran ge of data center envi ronments, including t hose en vironments that use the Cisco Unif ied Co mputing System, Cisco Ne x[...]

  • Page 16

    1-2 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 1 Overvi ew Figur e 1 -2 Fr ont P anel Featur es, Small F or m F actor Caution Do not use the Reset b utton. This b utton is for d ev elopment deb ugging only . This button will reset memory and CPU settings to the def aults. 1 KVM console connector 10 Hard driv es (up to[...]

  • Page 17

    1-3 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 1 Overview Figure 1-3 sho w s the external features of the rear panel. A Generation M2 server i s show n (the USB ports and the 10/100 Ethernet management po rt are in slightly dif ferent positions for Generation M1). Figur e 1 -3 Rear P anel Featur es 1 Pow er supply (up [...]

  • Page 18

    1-4 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 1 Overvi ew The Cisco UCS C200 serv er has the follo wing compon ents and features. Differ ences between the Large Form F actor (LFF) v ersion of the server (PID R200-1120402W) and the Small F orm Factor (SFF) version of the serv er (PID UCS-BSE-SFF- C200) are noted. . T [...]

  • Page 19

    1-5 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 1 Overview Disk Management Factory-conf igured RAID 9 support options, which di f fer for the LFF and SFF versions of the server . • LFF: – RAID 0 and 1 supp ort for up to 4 SA T A driv es with the inte grated SA T A controller . Note The inte grated ICH10R RAID contr [...]

  • Page 20

    1-6 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 1 Overvi ew See Appendix A, “T echnical Specifications” for more physical , en vironmental, and power details. 9. RAID = redundant arra y of independent disks[...]

  • Page 21

    CH A P T E R 2-1 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 2 Installing the Server This chapter describes how to install the server and includes the follo wing sections: • Unpacking and Inspecting t he Server , page 2-2 • Preparing for Installation , page 2-3 • Installing the Server Into a Rack, page 2-5 • Initial Ser[...]

  • Page 22

    2-2 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server Unpacking and In specting the Server Unpacking and Inspecting the Server Ti p Keep the shipping container in case the se rver requires shipp ing in the future. Note The chassis is thoroughly inspected before shipment . If any damage occurred du ri[...]

  • Page 23

    2-3 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server Preparing for Installation Preparing for Installation This section includes the following topics: • Installation Guidelines, p age 2-3 • Rack Requirements, page 2-4 • Required Equipment , page 2-4 Installation Guidelines War ni n g T o prevent[...]

  • Page 24

    2-4 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server Preparing for Installation Rack Requirements This section provides the requirem ents for the standard open racks, assuming an e xternal ambient air temperature range of 32 to 95  F (0 to 35  C). The rack must be of the follo wing type: • S[...]

  • Page 25

    2-5 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server Installing the Server Into a Rack Installing the Server Into a Rack The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo wing URL and th[...]

  • Page 26

    2-6 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server Installing the Se rver Into a Rack Figur e 2-2 Attaching a Sl ide-Rail Assembly Note The mounting pegs th at protrude through t he rack-post holes are designed to f it round or squar e #12-24 holes, or #10-32 holes when t he mounting pe g is compr[...]

  • Page 27

    2-7 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server Installing the Server Into a Rack d. Attach the second slide-rail assemb ly to the opposite side of the rack. En sure that the two slide-rail assemblies are lev el and at the same height with each other . e. Pull the inner slide ra ils on each assem[...]

  • Page 28

    2-8 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server Installing the Se rver Into a Rack Step 4 Attach the (optional) cable management ar m (CMA) to the rear of the slide rai ls: Note The orientation in these instructio ns refers to a vie w from the front of the serv er . a. Slide the plastic clip on[...]

  • Page 29

    2-9 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server Initial Server Setup Initial Server Setup This section contains the following topics: • Connecting and Po wering On the Se rver (Standalone Mo de), page 2-9 • NIC Modes and NIC Redundan cy Settings, page 2- 12 Connecting and Powering On the Serv[...]

  • Page 30

    2-10 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server Initial Server Setup Step 2 Use the supplied KVM cable to connect a keyboard and VGA monito r to the console connector on the front panel (see Figure 1-1 on page 1-1 or Figure 1-2 on page 1-2 ). Note Alternati vely , you can use the VGA and USB p[...]

  • Page 31

    2-11 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server Initial Server Setup d. Use this utility to change the NIC redundancy to your preference. This server has three possible NIC redundanc y settings: – None—The Ethernet ports operate independent ly and do not f ail ov er if there is a problem. ?[...]

  • Page 32

    2-12 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server Initial Server Setup NIC Modes and NIC Redundancy Settings This server h as the follo wing NIC mode settings th at you can choose from: • Dedicate d—The 10/100 dedicated manageme nt port is used to access the CIMC. Y ou hav e to select a NIC [...]

  • Page 33

    2-13 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server System BIOS and CIMC Firmware System BIOS and CIMC Firmware This section contains information about the system BIOS and it includes the f ollowing sections: • Updating the BIO S and CIMC Fi rmware, pa ge 2-13 • Accessing the System BIOS, page 2[...]

  • Page 34

    2-14 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server System BIOS and CIMC Fir mware Accessing the System BIOS Y ou can change the BIOS settings fo r your server by using the procedure in this section. Detailed instructions ar e also printed on the BI OS screens. Step 1 Enter the BIOS setup utility [...]

  • Page 35

    2-15 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server System BIOS and CIMC Firmware Motherboard Jumpers These jumpers are adjacent to the CMOS battery (see Figu re 2-6 ). This section contains th e follo wing topics: • Using the BIOS Recovery Jumper J1E5 to Reco ver Corru pt BIOS, page 2-16 • Clea[...]

  • Page 36

    2-16 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server System BIOS and CIMC Fir mware Using the BIOS Recovery Jumper J1E5 to Recover Corrupt BIOS This jumper is adjac ent to the CMOS battery (see Figure 2-6 ). Y ou can use this jumper to force the server to flash a new BIOS, in the case of a system h[...]

  • Page 37

    2-17 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server System BIOS and CIMC Firmware Clearing the CIMC Admin Pa ssword Using Jumper J45 This procedure describes ho w to clear the CIMC admin password back to the def ault in case the user-selected password is lost o f forgotten. Step 1 Po wer of f the se[...]

  • Page 38

    2-18 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server System BIOS and CIMC Fir mware Using the Clear CMOS Jumper J1E6 Y ou can use this jumper to clear the server’ s CMOS settings in the case of a system ha ng. For e xample, if the server hang s because of incorrect settin gs a nd does not boot, u[...]

  • Page 39

    2-19 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 2 Installing the Server System BIOS and CIMC Firmware Clearing the BIOS Admin Pa ssword Using Jumper J1E4 This procedure describes ho w to clear the BIOS admin password for th e BIOS back to the default in case the user-selected passw ord is lost of for gotten. Step 1 Po [...]

  • Page 40

    2-20 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 2 Installin g the Server System BIOS and CIMC Fir mware[...]

  • Page 41

    CH A P T E R 3-1 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 3 Maintaining the Server This chapter describe s how to diagnose hardware problems with status LEDs and ho w to install or replace hardware compon ents, and includes the follo wing sections: • Server Moni toring and Managemen t T ools, page 3-1 • Status LEDs, page[...]

  • Page 42

    3-2 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Status LEDs Status LEDs This section describes the locat ions and interpretation s of LEDs on the server that can provide status and troubleshooting info rmation. This section includes the follo wing topics: • Front Panel LEDs, page 3-2 • Rea[...]

  • Page 43

    3-3 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Status LEDs Figur e 3-2 Fr ont P anel LEDs (Small F or m F act or) Ta b l e 3 - 1 describes the possible states and interp retations for the LEDs that ar e sho wn in Figure 3-1 . 1 Pow er supply fault LED 8 Hard driv e fault LED 2 Memory fault LEDs[...]

  • Page 44

    3-4 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Status LEDs Rear Panel LEDs Figure 3-3 sho w s the names and locations of the rear pane l LEDs. A Generation M2 server is sho wn (the USB ports and the 10/100 Ethernet management po rt are in slightly dif ferent positi ons for Generation M1). See[...]

  • Page 45

    3-5 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Status LEDs Ta b l e 3 - 2 describes the possible states and interp retations for the LEDs that ar e sho wn in Figure 3-3 . T able 3-2 Rear P anel LEDs LED Name State Pow er supply status • Off —No A C po wer is present in an y power su pplies.[...]

  • Page 46

    3-6 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Status LEDs Note The 10/100/1000 Giga bit Ethernet link status LED and the speed LED must be read in combination fo r the follo wing interpretati ons. 10/100/1000 Gi gabit Ethernet speed (left) 10/100/1000 Gi gabit Ethernet link stat us (right) ?[...]

  • Page 47

    3-7 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Preparing for Component Installation Preparing for Component Installation This section descri bes how to prepare the server for compo nent installation and includes th e follo wing topics: • Required Equipment , page 3-7 • Shutting Do wn and Po[...]

  • Page 48

    3-8 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Preparing for Comp onent Installation Step 1 Check the color of the Power Status LED (see the “Front Panel LEDs” section on p age 3-2 ). • Green indicates that the server is in main p ower mode and must be shut down before it can be safely [...]

  • Page 49

    3-9 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Preparing for Component Installation Removing and Replacing the Server Top Cover T o remo ve or replace the server top co ver , follow these steps: War ni n g This unit might have m ore than one power cord. T o reduce the risk of electric shock, di[...]

  • Page 50

    3-10 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Preparing for Comp onent Installation Removing and Replacing the Server Front Cover (Small Form Factor Only) Note It is not necessary to remove the front cov er unle ss instructed to do so in a replacement procedure. T o remo ve or replace the f[...]

  • Page 51

    3-11 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Preparing for Component Installation Replaceable Component Locations This section sho ws the locati ons of the components t h at are discussed in this chapter . The view sho wn is from the top do wn, with the top cov er , intern al cable cov er , [...]

  • Page 52

    3-12 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Preparing for Comp onent Installation Figure 3-7 Replace able Component Locations, Small For m F a ctor (T op V iew) 1 Hard dri ves (up to eigh t, accessible through front bays) 7 PCIe card connector on riser card (with standard-profile slot ) 2[...]

  • Page 53

    3-13 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Installing or Replacing Components War ni n g This unit might have m ore than one power cord. T o reduce the risk of electric shock, disconnect the two power supply cords before servicing the unit. Statement 14 [...]

  • Page 54

    3-14 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Replacing a Front Panel Control Module or DVD Module (Small Form Factor Only) The Small Form F actor version of the serv er (P ID UCSC-BSE-SFF-C200) ca n contain a replaceable front panel control modu le or an[...]

  • Page 55

    3-15 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Note The rear edge of the front cover should go under the black plastic cable cov er . f. Replace the top cover as described in the “Removing and Replacing the Server T op C ov er” section on page 3-9 . g. R[...]

  • Page 56

    3-16 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-9 Alter nate F r ont P anel Modu le Cable Routing 1 Securing scre w (one on each end) 3 Fan tray conn ector 2 Fan tray with battery unit bracket 282336 Fans Motherboard Fans Motherboard SA T A CONN S[...]

  • Page 57

    3-17 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Installing Hard Drives or Solid State Drives The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo [...]

  • Page 58

    3-18 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components – If you ha ve th e LFF version of t he server with 3 .5-in dri ves, the f our scre ws install o n the bottom of the sled. – If you hav e the SFF version of the server wi th 2. 5-in dri ves, tw o screws in[...]

  • Page 59

    3-19 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Figure 3-12 Dr ive Numbering and Ph ys ical Or ientation, F acing Server F r ont (Small F or m F act or) Figur e 3-13 Removing and Replacing Ha r d Dr iv es (Small F or m F actor) HDD_01 HDD_02 HDD_03 HDD_04 HDD[...]

  • Page 60

    3-20 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Installing Power Supplies The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo wing URL and then[...]

  • Page 61

    3-21 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Installing a Fan Tray The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo wing URL and then scrol[...]

  • Page 62

    3-22 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-15 Removing and Replacing a F an T ra y 1 Securing scre w (one on each end) 3 Fan tray conn ector 2 Fan tray with battery unit bracket 1 2 3[...]

  • Page 63

    3-23 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Installing DIMMs This section includes the following sections: • Memory Performance Guideli nes and Population Rules, page 3-23 • DIMM Installation Pr ocedure, page 3-26 Note T o ensure the be st server perf[...]

  • Page 64

    3-24 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-16 Ph ysical Repr esenta tion of Banks and Channels Memory Population Rules When considering the memory co nfigurat ion of your serv er , you should consider the follo wing items: • DIMMs within th[...]

  • Page 65

    3-25 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Low-Voltage DIMM Considerations (Gen eration M2 Only) The Generation M2 of thi s server can be or dered w ith lo w-v oltage (1.35 V) DI MMs or standard-v oltage (1.5 V) DIMMs . Note the following consid erations[...]

  • Page 66

    3-26 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components DIMM Installation Procedure T o install or replace a DIMM, follo w these steps: Note Refer to the DIMM population rules b efore removing or inst alling DIMMs. See the “Memory Performance Guidelines and Popul[...]

  • Page 67

    3-27 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Figur e 3-1 7 Rem oving and Replacing Memory Modules 1 DIMM slots ( twelv e) 3 Alignment key in DIMM slot 2 DIMM slot ejector le v er (two on each slot) 1 195728 2 3[...]

  • Page 68

    3-28 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Installing CPUs and Heatsinks The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo wing URL and [...]

  • Page 69

    3-29 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Figur e 3-18 Removing and Repl acing CPUs and Heatsinks 1 Capti ve heatsink scre ws (two per CPU) 3 CPU socket alignment k eys 2 CPU cover plate 4 CPU socket latch 195729 1 4 2 3 1[...]

  • Page 70

    3-30 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Installing a Motherboard CMOS Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly . Replace the battery only w ith the same or equivalent type rec ommended by the manufacture[...]

  • Page 71

    3-31 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Figur e 3-19 Removing and Replac ing a Motherboard CMOS Bat tery Installing a Trusted Platform Module The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most u[...]

  • Page 72

    3-32 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components c. Replace the PCIe rise r card assembly . See the “Replacing a PCIe Riser Card Assembly” sect ion on page 3-33 for instructi ons. d. Replace the top cover . e. Replace the server in the rack, replace powe[...]

  • Page 73

    3-33 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components h. On the BIOS utility screen, select the Security tab . i. Scroll down to TPM an d select TURN ON . j. Press F10 to sav e your setting s and reboot the server . k. W atch during bootup for the F2 prompt, and th[...]

  • Page 74

    3-34 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-21 Removing and Replacin g a PCIe Riser Car d Assembly Replacing a PCIe Card This section contains the following topics: • Replacement Procedure, page 3-3 5 • Special Considerations for the Cisco[...]

  • Page 75

    3-35 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Replacement Procedure Installing a PCIe card requires that you first remo ve the ri ser card assembly from the chassis. T o install or replace a PCIe card, follow these steps: Step 1 Remov e a PCIe card: a. Po w[...]

  • Page 76

    3-36 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-22 PCIe Slot Number ing and Ph ysical Or ientation, Fa cing Server Rear Figur e 3-23 Removing and Replacing a PCIe Card PCIe Slot 7 PCIe Slot 6 1 Riser card assembly removed from chassis 3 PCIe card [...]

  • Page 77

    3-37 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Special Considerations for the Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01) The Cisco UCS P81E V irtual Interface Card is a standa rd-profile, half-length, du al-port 10 Gb PCIe car d with SFP+. See the [...]

  • Page 78

    3-38 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Installing Multiple PCIe Cards and Resolving Limited Resources When a large number of PCIe add- on cards are installed in the serv er, the sy stem may run out of t he following resources r equired for PCIe dev[...]

  • Page 79

    3-39 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces availab le. This 64 KB of I/O space is divided between the CPUs in the sys tem because the PCIe co ntroller is in[...]

  • Page 80

    3-40 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Replacing an LSI MegaRAID Battery Backup Unit When you install an LSI Me gaRAID card and the op tional BBU in this serv er , do not install the BBU on top of the card as described in t he LSI instructions. T o[...]

  • Page 81

    3-41 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Note Be careful to align the arro w-mark on the cable connector wit h the arro w-mark on the socket to av oid damaging the connector pins. b. Place the new BBU o ver the BBU bracket on the fan tray and align the[...]

  • Page 82

    3-42 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Replacing an LSIiBBU08 BBU This BBU is supported b y Cisco for use with the follo wing RAID controller cards: • LSI MegaRAID 926 0-4i (Cisco product ID R200-PL004, LSI 6G MegaRAID 9260- 4i card w/512MB writ [...]

  • Page 83

    3-43 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Figure 3-26 Replacing a Mo unting Brack et for the LSIiBBU08 BBU (Enlar ged) Step 2 Install the ne w LSIiBBU0 8 BBU: Note The LSIiBBU08 BBU requires minimum LSI Mega RAID card fi rmware 2.120.133.1322 or l ater [...]

  • Page 84

    3-44 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-27 Removing and Replacing an LSIiBBU06 BBU 1 BBU bracket on fan tray 3 BBU (connect or J2 is on the underside) 2 Securing scre ws (two) 331003 1 2 3[...]

  • Page 85

    3-45 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Chapter 3 Maintaining the Server Installing or Repla cing Components Installing a Mezzanine Card The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo wing URL and then[...]

  • Page 86

    3-46 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Chapter 3 Main taining the Server Installing or Re placing Components Figur e 3-28 Removing and Replacing a Mezzanine Card 1 Mezzanine card retaining posts (three) 2 Mezzanine card 195954 2 1[...]

  • Page 87

    A-1 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 APPENDIX A Technical Specifications This appendix lists t he technical specif ications for the Cisco UCS C200 ser ver and incl udes the follo wing sections: • Physical Specif ications, page A-1 • En vironmental Specifications, pa ge A-2 • Po wer Specifications, page A-2 Phy[...]

  • Page 88

    A-2 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix A Technical Specific ations Environmental Specifications Environmental Specifications Ta b l e A - 2 lists the en vironmental sp ecifications for the server . Power Specifications Ta b l e A - 3 lists the specifications for each power supply . Y o u can get more specifi c[...]

  • Page 89

    B-1 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 APPENDIX B Cable and Power Cord Specifications This appendix pro vides cabl ing and port speci fications fo r control de vices and po wer connection s and includes th e following sections: • KVM Cable, pa ge B-1 • Supported Po wer Cords and Plugs, pag e B-2 KVM Cable The KVM [...]

  • Page 90

    B-2 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specific ations Supported Po wer Cords an d Plugs Supported Power Cords and Plugs Each po wer supply has a sep arate po wer cord. Standa rd po wer cords or jumper power cords are av ailable for connection to the server . The jumper power cord s, for[...]

  • Page 91

    B-3 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specifications Supported Power Cords and Plugs AC Power Cord Illustrations This section contains the A C po wer cord illustrations. Figure B-2 SFS-250V -1 0A -AR Figur e B-3 CAB-9K1 0A -A U CAB-N5K6A- N A Pow er Cord, 250 V A C 13 A NEMA 6-15 Plug,[...]

  • Page 92

    B-4 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specific ations Supported Po wer Cords an d Plugs Figure B-4 SFS-250V -1 0A -CN Figur e B-5 CAB-9K1 0A -EU Figur e B-6 SFS-250 V -1 0A -ID Cordset rating 10A, 250V (2500 mm) Plug: EL 218 (CCEE GB2009) 186573 Connector : EL 701 (IEC60320/C13) Connect[...]

  • Page 93

    B-5 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specifications Supported Power Cords and Plugs Figur e B-7 SFS-250 V -1 0A -IS Figur e B-8 CAB-9K1 0A -IT Figur e B-9 CAB-9K1 0A -SW Cordset rating 10A, 250V/500V MAX (2500 mm) Plug: EL 212 (SI-32) 186574 Connector : EL 701B (IEC60320/C13) EL -212 [...]

  • Page 94

    B-6 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specific ations Supported Po wer Cords an d Plugs Figur e B-1 0 CAB-9K1 0A -UK Figure B-1 1 CAB-AC-250V/13A Figur e B-12 CAB-N5K6A -NA Plug: Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm 186580 Connector : EL 701C (EN 60320/C15) EL 210 (BS 13[...]

  • Page 95

    B-7 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specifications Supported Power Cords and Plugs Figur e B-13 CAB-9K12A -NA Figur e B-14 CAB-C13-C14-JM PR, Jumper P o wer Cor d Connector: IEC60320/C15 Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: NEMA 5-15P 192260 Cordset rating 10A, 250V (686m[...]

  • Page 96

    B-8 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix B Cable and Power Cord Specific ations Supported Po wer Cords an d Plugs[...]

  • Page 97

    C-1 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Required Cabl es, page C-1 • Enabling the Inte grated Intel ICH10R RAID Controller i n the BIOS, page C-2 • Enabling the Mezzanine Card RAID Controll[...]

  • Page 98

    C-2 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations Enabling the Integrat ed Intel ICH10R RAID Controller in the BIOS Enabling the Integrated Intel ICH10R RAID Controller in the BIOS Note The integrated ICH10R RAID controller is not co mpatible for use with VMW are ESX/ESXi Server software [...]

  • Page 99

    C-3 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations Enabling the Me zzanine Card RAID Co ntroller in the BIOS Enabling the Mezzanine Card RAID Controller in the BIOS When using the supported mezzanine-style RA ID controll er card, you must enable the ICH10R controller in Enhanced mode. Ste[...]

  • Page 100

    C-4 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations How to Determine Which Contr oller Is in Your Server Cisco UCS C200 LFF Server Cabling The cable connections required for each t ype of controller ar e as follo ws: • Integ rated ICH10R: Connect one SA T A cable from the motherboard conn[...]

  • Page 101

    C-5 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations How to Disable Quiet Boot For CIMC Firmware Earlier Th an Release 1.2(1) • If the mezzanine-style card is enab led, you are pro mpted to press Ctrl-C to la unch th e configuration for these cards. See also Enabling the Mezza nine Card R[...]

  • Page 102

    C-6 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations Restoring RAID Configur ation After Replacing a RA ID Controller When you boot t he server and y ou hav e quiet boot disabled (see Ho w to Disable Quiet Boot F or CIMC Firmware Earlier Than Release 1.2( 1), page C-5 ), information about yo[...]

  • Page 103

    C-7 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations For More Information For More Information The LSI utilities ha v e help documentation for more information abou t using the utilities. For basic i nformation about RAID and for using the utilities for th e RAID controller cards, see the C[...]

  • Page 104

    C-8 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix C RAID Controller Considerations For More Information[...]

  • Page 105

    D-1 Cisco UCS C200 Server Insta llation and Service Guide OL-20732-02 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov ed to the integratio n guides found here: Cisco UCS C-Series Server I nte gration wit h UCS Manager Guides Refer to the guide that is for the versio n of Cisco UCS Manager tha[...]

  • Page 106

    D-2 Cisco UCS C200 Server Installation and Service Guide OL-20732-02 Appendix D Installati on for Cisco UCS Integration[...]