Compaq 110 manuel d'utilisation

b Maintenance and Service Guide Compaq Ar mada 110™ Document P ar t Number : 238850-001 A pril 2001 This guide is a troubleshooting reference used for maintaining and servicing the notebook. It provides comprehensi ve information on identifying computer features, components, and spare parts, troubleshooting computer problems, and performing compu[...]

© 2001 Compaq Computer Corporation Compaq, the Compaq logo, Armada, Deskpro Registered in U. S. P atent and T rademark Off ice. Microsoft, MS-DOS, W indows, W indo ws NT are trademarks of Microsoft Corporation in the United States and other countries. All other product names mentioned herein may be trademarks of their respectiv e companies. Compaq[...]

Maintenance and Serv ice Guide iii Contents 1 Product Description 1.1 Models and Features . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.2 Security . . . . . . . . . . .[...]

iv Maintenance and Ser vice Guide 2.9 No Operating System (OS) Loading . . . . . . . . . 2–12 2.10 No OS Loading from Hard Drive, Part 1. . . . . 2–13 2.11 No OS Loading from Hard Drive, Part 2. . . . . 2–14 2.12 No OS Loading from Hard Drive, Part 3. . . . . 2–15 2.13 No OS Loading from Diskette Drive . . . . . . . . 2–16 2.14 No OS Load[...]

Maintenance and Serv ice Guide v 5 Removal and Replacement Procedures 5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . . 5–3 5.3 Preparing the Computer for Disassembly . . . . . . . . . 5–4 5.4 Computer Feet . . . . . . . . . . . . . . . . . . [...]

Maintenance and Serv ice Guide 1–1 1 Pr oduct Description 1.1 Models and Features The Compaq Armada 110 Series notebook of fers advanced modularity , Intel Pentium III or Intel Celeron processors with 64-bit architecture, industry-leading Accelerated Graphics Port (A GP) implementation, and extensi ve multimedia support. . Figure 1–1: Compaq Ar[...]

1–2 Maintenance and Ser vice Guide Product Description Models Computer models are sho wn in T able1-1. T able 1-1 Compaq Armada 110 Models and Model Naming Con ventions Key A11 P 800 4X 10 V C 128 98 9L XXXXXX-XXX 12 3 4 5 6 7 89 1 0 1 1 Ke y Description Options 1 Brand / Series designator A=Ar mada 11=110 2 Processor type P=Intel P entium III C=[...]

Product Description Maintenance and Serv ice Guide 1–3 12 3 4 5 6 7 89 1 0 1 1 A11 P 800 4X 10 V C 64 M L 226917-B21 A11 P 800 4X 10 D C 64 M L 226915-B21 A11 P 800 4X 10 D C 64 M L 231665-B21 (NAFT A) A11 P 800 TS 10 D C 64 M L 226918-B21 A11 C 700 TX 1 0 D C 64 M L 231664-B21 A11 C 700 TX 1 0 D C 64 M H 226919-B21 A11 C 700 TS 1 0 D M 64 8M H 2[...]

1–4 Maintenance and Ser vice Guide Product Description Features ■ Processors, v arying by computer model: ❏ 800-MHz Intel Pentium III Processor , with 256-KB integrated cache ❏ 700-MHz Intel Celeron Processor , with 128-KB integrated cache ■ A TI RA GE L T Pro, 4-MB SGRAM (synchronous graphics) ■ 64-MB high-performance Synchronous DRAM [...]

Product Description Maintenance and Serv ice Guide 1–5 ■ Connectors for: ❏ stereo speaker/headphone ❏ microphone ❏ uni v ersal serial bus ❏ RJ-45 network (internal network models only) ❏ RJ-11 modem ❏ ke yboard/mouse ❏ AC p ow e r ❏ infrared port ■ Stereo speakers 1.2 Security If the notebook you are servicing has a password a[...]

1–6 Maintenance and Ser vice Guide Product Description If the notebook you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS. 1. Prepare the computer for disassembly . Refer to Section 5.3, “Preparing the Computer for Disassembly , ” for more information. 2. Remov e the disk cell R [...]

Product Description Maintenance and Serv ice Guide 1–7 Timeout Settings T imeout functions can be set up to power do wn computer components by selecting the Po wer Schemes tab from the po wer application in the operating system ’ s Control Panel. When a component such as the monitor , hard driv e, system, or video is not in use, the component p[...]

1–8 Maintenance and Ser vice Guide Product Description Standb y Standby is an ener gy-saving feature that conserv es power and reduces startup time. Standby reduces po wer to system components that are not being used. Standby can be initiated b y you or by the system. When Standby is initiated, all w ork is saved in random access memory (RAM) and[...]

Product Description Maintenance and Serv ice Guide 1–9 1.4 Computer External Components The external components on the display and left side of the computer are sho wn in Figure 1-2 and described in T able 1-2. Figure 1–2: Display and Left Side Components Ta b l e 1 - 2 Display and Left Side Components Item Component Function 1 Displa y release[...]

1–10 Maintenance and Ser vice Guide Product Description The computer right side and rear panel components are sho wn in Figure 1-3 and described in T able 1-3. Figure 1–3: Right Side and Rear P anel Components T able 1-3 Right Side and Rear P anel Components Item Component Function 1 Optical driv e Accepts CD- or D VD-ROM disks , depending on t[...]

Product Description Maintenance and Serv ice Guide 1–11 5 K eyboard/mouse connector Connects an optional full-sized k e yboard or a mouse. When this connector is used, both the e xter nal and computer ke yboard and pointing de vice are activ e. An optional splitter/adapter allows both an e xter nal ke yboard and mouse to be used at the same time.[...]

1–12 Maintenance and Ser vice Guide Product Description The computer ke yboard components are sho wn in Figure 1-4 and described in T able 1-4. Figure 1–4: Ke yboard Components[...]

Product Description Maintenance and Serv ice Guide 1–13 Ta b l e 1 - 4 Ke yboard Components Item Component Function 1 Fn k ey Used with hotke ys to perf orm preset hotkey functions. 2 Caps lock ke y T urns on the caps lock function. 3 F1 through F12 function ke ys P erf or m preset functions. 4 Display s witch T urns off the computer display if t[...]

1–14 Maintenance and Ser vice Guide Product Description The components on the top of the computer are sho wn in Figure 1-5 and described in T able 1-5. Figure 1–5: T op Components T able 1-5 T op Components Item Component Function 1 Speak ers (2) Produce stereo sound. 2 Hard driv e light On: The primar y hard drive is being accessed.[...]

Product Description Maintenance and Serv ice Guide 1–15 3 Battery light Green steady: Batter y charging is complete . Red steady: Batter y pac k is charging. Red blinking: Battery pack is being queried, computer cannot communicate with battery pack, or battery pack is bad. 4 Num loc k light On: Num lock is on and the embedded numeric ke ypad is e[...]

1–16 Maintenance and Ser vice Guide Product Description The external components on the bottom of the computer are sho wn in Figure 1-6 and described in T able 1-6. Figure 1–6: Bottom Components[...]

Product Description Maintenance and Serv ice Guide 1–17 T able 1-6 Bottom Components Item Component Function 1 Mini PCI slot cov er Contains the mini PCI modem or network interface card. 2 F an vent Provides airflo w to cool inter nal components. 3 Cer tificate of A uthenticity label Contains the Product K ey , which ma y need to be entered befor[...]

1–18 Maintenance and Ser vice Guide Product Description 1.4 Design Overview This section presents a design ov erview of k ey parts and features of the computer . Refer to Chapter 3, “ Illustrated Parts Catalog ” and Chapter 5, “ Remov al and Replacement Procedures. ” The system board provides the follo wing device connections: ■ Memory [...]

Maintenance and Serv ice Guide 2–1 2 T r oubleshooting Å W ARNING: Only authorized technicians trained b y Compaq should repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassemb ly/module lev el repair . Because of the comple xity of the individual boards and subassemblies , no one should attempt to m[...]

2–2 Maintenance and Ser vice Guide T roubleshooting Using the PhoenixBIOS Setup Utility The PhoenixBIOS Setup Utility (PSU) is built into the system. Y ou can configure the system BIOS and modify or restore factory default settings, such as date and time, types of disk dri ves, po wer management, and password settings. T o run PSU, press F10 duri[...]

T roubleshooting Maintenance and Serv ice Guide 2–3 T roub leshooting Flowc har ts for P or table Computer s T able 2-1 T r oubleshooting Flowcharts Overview Section Description 2.1 Initial troubleshooting 2.2 No power , par t 1 2.3 No power , par t 2 2.4 No power , par t 3 2.5 No power , par t 4 2.6 No video , par t 1 2.7 No video , par t 2 2.8 [...]

2–4 Maintenance and Ser vice Guide T roubleshooting 2.1 Initial T r oubleshooting Connecting to network or modem? Go to Section 2.20, Network or Modem Connection. Begin T roubleshooting Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error Messages? Keyboard/ pointing device working? Go to Section 2.17[...]

T roubleshooting Maintenance and Serv ice Guide 2–5 2.2 No P ower , Part 1 No Power (Power LED is off) 1. Reseat power cables in docking station and at the AC outlet. 2. Ensure AC power source is active. 3. Ensure power strip is working. Done Remove from docking station if applicable. Power up on battery power? Power up on AC power? Power up in d[...]

2–6 Maintenance and Ser vice Guide T roubleshooting 2.3 No P ower , Part 2 Continued from Section 2.3, No Power , Part 1 Visually check for debris in battery socket and clean if necessary Done N Y Power on? Check battery by recharging, moving to another computer , or replacing it. Power on? Done Y Replace power supply , (if applicable) N Power on[...]

T roubleshooting Maintenance and Serv ice Guide 2–7 2.4 No P ower , Part 3 Continued from Section 2.3, No Power , Part 2 Reseat AC adapter in computer and at power source. Internal or external AC adapter? Done Done Done Done Power on? Power on? Power on? Plug directly into AC outlet. Power LED on? Power outlet active? T ry different outlet. Repla[...]

2–8 Maintenance and Ser vice Guide T roubleshooting 2.5 No P ower , Part 4 Y N Continued from Section 2.4, No Power , Part 3 Reseat loose components and boards and replace damaged items. Open computer . Loose or damaged parts? Y Close computer and retest. Power on? Done N Replace the following items, if applicable. Check computer operation after [...]

T roubleshooting Maintenance and Serv ice Guide 2–9 2.6 No Video, P ar t 1 A N Standalone or Docking Station? No Video Replace one at a time. T est after each item: 1. Cable between notebook and computer display (if applicable) 2. Inverter board (if applicable) 3. Display 4. System board Internal or external display*? Adjust brightness. Video OK?[...]

2–10 Maintenance and Ser vice Guide T roubleshooting 2.7 No Video, P ar t 2 Y N Continued from Section 2.6, No Video, Part 1 Done Video OK? Adjust external monitor display . Adjust display brightness. Video OK? Video OK? Done Done Check for notebook properly seated in docking station, bent pins on cable, and for monitor connection. Go to “A” [...]

T roubleshooting Maintenance and Serv ice Guide 2–11 2.8 Non-Functioning Doc king Station (if applicable) Y N Reseat power cord in docking station and power outlet. N Replace these docking station component s one at a time. Check computer operation after each replacement: 1. Power supply 2. I/O board 3. Backplane board 4. Switch box 5. Docking mo[...]

2–12 Maintenance and Ser vice Guide T roubleshooting 2.9 No Operating System (OS) Loading Hard drive, go to Section 2.10. Reseat power cord in docking station and power outlet. Diskette drive, go to Section 2.13. CD-/DVD-ROM drive, go to Section 2.14. Network, go to Section 2.20. NOTE: Before beginning, always check cable connections, cable ends,[...]

T roubleshooting Maintenance and Serv ice Guide 2–13 2.10 No OS Loading fr om Hard Drive, P ar t 1 Go to Section 2.17, Non-Functioning Device. Y Done N OS not loading from hard drive. Non- system disk message? Go to Section 2.11, No OS Loading from Hard Drive, part 2. Reseat external hard drive. OS loading? Done Boot from CD? Go to Section 2.13, [...]

2–14 Maintenance and Ser vice Guide T roubleshooting 2.11 No OS Loading fr om Hard Drive, P ar t 2 Continued from Section 2.10, No OS Loading from Hard Drive, Part 1 Reseat hard drive. Done CD or diskette in drive? 1. Replace hard drive. 2. Replace system board. Go to Section 2.12, No OS Loading from Diskette Drive. Load OS using Restore CD if ap[...]

T roubleshooting Maintenance and Serv ice Guide 2–15 2.12 No OS Loading fr om Hard Drive, P ar t 3 Y System files on hard drive? Continued from Section 2.11, No OS Loading from Hard Drive, Part 2. Clean virus (see note). Done N Install OS and reboot (see note). Virus on hard drive? OS loading from hard drive? Y N Y N Y N Diags on diskette? Replac[...]

2–16 Maintenance and Ser vice Guide T roubleshooting 2.13 No OS Loading fr om Diskette Drive Done Y N Reseat diskette drive. OS not loading from diskette drive. Done Y Y Y Y Y Y Y N N N N N N N OS loading? Non- System Disk message? Bootable diskette in drive? Install bootable diskette and reboot computer . Check diskette for system files. T ry di[...]

T roubleshooting Maintenance and Serv ice Guide 2–17 2.14 No OS Loading fr om CD- or D VD-ROM Drive Y Done N Bootable disk in drive? Disk in drive? No OS loading from CD- or DVD-ROM drive. Install bootable disk and reboot computer . Go to Section 2.17, Non-Functioning Device. Go to Section 2.17, Non-Functioning Device Install bootable disk. Boots[...]

2–18 Maintenance and Ser vice Guide T roubleshooting 2.15 No A udio, P ar t 1 No audio. N Notebook in docking station (if applicable)? Internal audio? Audio? Done Undock Audio? Done T urn up audio internally and/or externally . Go to Section 2.16, No Audio, Part 2. Go to Section 2.16, No Audio, Part 2. Go to Section 2.8, Non-Functioning Device Re[...]

T roubleshooting Maintenance and Serv ice Guide 2–19 2.16 No A udio, P ar t 2 YN Continued from Section 2.15, No Audio, Part 1. Reload audio drivers. Audio driver in OS configured? Audio? 1. Replace internal speakers. 2. Replace audio board, if applicable. 3. Replace system board. Y Y Y N N N Correct drivers for application? Connect to external s[...]

2–20 Maintenance and Ser vice Guide T roubleshooting 2.17 Non-Functioning Device Done Any physical device? Y N Unplug the non-functioning device from the notebook, inspect cables and plugs for bent or broken pins or other damage. Reseat device. Clear CMOS. Done Fix or replace broken item. Non- Functioning Device Reattach device. Close notebook, p[...]

T roubleshooting Maintenance and Serv ice Guide 2–21 2.18 Non-Functioning Ke yboard Y N OK? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external keyboard. Reseat internal keyboard connector (if applicable). Replace internal keyboard or cable. OK? Y N Y N Done Done[...]

2–22 Maintenance and Ser vice Guide T roubleshooting 2.19 Non-Functioning P ointing Device Y N OK? Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external pointing device. Reseat internal pointing device connector (if applicable). Replace internal pointing devic[...]

T roubleshooting Maintenance and Serv ice Guide 2–23 2.20 Netw ork or Modem Connection Y Disconnect all power from the notebook and open. No network/modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated. Connect to non-digital line. NIC/modem configured in OS? Reload drivers and reconfigure. Rese[...]

Maintenance and Serv ice Guide 3–1 3 Illustrated P ar ts Catalog This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers and option part numbers. 3.1 Serial Number Location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer ([...]

3–2 Maintenance and Ser vice Guide Illustrated P ar ts Catalog 3.2 Computer System Major Components Figure 3–2: Computer System Major Components[...]

Illustrated P ar ts Catalog Maintenance and Serv ice Guide 3–3 T able 3-1 Spare P ar ts: Computer System Major Components Item Description Spare P ar t Number 1 Displays 14.1-inch, XGA, CTFT 12.1-inch, SV GA, CTFT 233545-001 233544-001 Plastics Kit 233562-001 2a 2b 2c 2d Left hinge cov er Right hinge cov er Memor y e xpansion compar tment cov er [...]

3–4 Maintenance and Ser vice Guide Illustrated P ar ts Catalog Computer System Major Components (continued)[...]

Illustrated P ar ts Catalog Maintenance and Serv ice Guide 3–5 Ta b l e 3 - 1 Spare P ar ts: Computer System Major Components (Continued) Item Description Spare P ar t Number 8 Diskette drive 233553-001 9 10-GB hard drive (hard drive brac ket spared in Hardware Kit, spare par t number 234005-001) 233554-001 10 Disk cell RTC battery 236359-001 Har[...]

3–6 Maintenance and Ser vice Guide Illustrated P ar ts Catalog 3.3 Plastics Kit Components Figure 3–3: Plastics Kit Components T able 3-2 Plastics Kit Components Spare P ar t Number 233562-001 Item Description 1 Left hinge cov er 2 Right hinge cov er 3 Memor y e xpansion compar tment cov er 4 Mini PCI slot cov er 5 Computer f eet 6 RJ-45 cov er[...]

Illustrated P ar ts Catalog Maintenance and Serv ice Guide 3–7 3.4 Har dware Kit Components Figure 3–4: Hard ware Kit Components T able 3-3 Hard ware Kit Components Spare P ar t Number 234005-001 Item Description 1 F an brac ket 2 Optical drive alignment rail 3 Hard drive brac ket[...]

3–8 Maintenance and Ser vice Guide Illustrated P ar ts Catalog 3.5 Cable Kit Components Figure 3–5: Cable Kit Components T able 3-4 Cable Kit Components Spare P ar t Number 234006-001 Item Description 1 Diskette driv e cable (2) 2 T ouchP ad cable 3 RJ-11 cable 4 RJ-45 cable[...]

Illustrated P ar ts Catalog Maintenance and Serv ice Guide 3–9 3.6 Mass Storage Devices Figure 3–6: Mass Storage Devices T able 3-5 Mass Storage Devices Item Description Spare P ar t Number 1 Diskette driv e 233553-001 2 10-GB hard drive 233554-001 3 24X Max CD-ROM driv e 233550-001 4 8X Max D VD-ROM drive 233548-001[...]

3–10 Maintenance and Ser vice Guide Illustrated P ar ts Catalog 3.7 Miscellaneous T able 3-6 Spare P ar ts: Miscellaneous (not illustrated) Description Spare P ar t Number Modems T ype III mini PCI combination 56 Kbps modem/NIC board T ype III mini PCI 56 Kbps modem board PC Card modem 233558-001 233557-001 233564-001 Modem adapters Czech German [...]

Illustrated P ar ts Catalog Maintenance and Serv ice Guide 3–11 External A C adapter 50W slim A C adapter 163444-001 163444-291 Logo kit 233556-001 Memory expansion boards 256 MB 128 MB 64 MB 167136-001 135244-001 135243-001 Screw kit (includes M2.5 × 7, M2.5 × 5.5, M2.5 × 5, and M2.5 × 4.5 screws; ref er to Appendix C , “Scre w Listing, ?[...]

Maintenance and Serv ice Guide 4–1 4 Remo v al and Replacement Preliminaries This chapter provides essential information for proper and safe remov al and replacement service. 4.1 T ools Required Y ou will need the following tools to complete the remov al and replacement procedures: ■ Magnetic scre wdriv er ■ Phillips P0 scre wdriver ■ T ool[...]

4–2 Maintenance and Ser vice Guide Remov al and Replacement Preliminaries Plastic P ar ts Using excessi ve force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and Connector s Cables must be handled with extr[...]

Remov al and Replacement Preliminaries Maintenance and Serv ice Guide 4–3 ■ Before handling a dri ve, ensure that you are discharged of static electricity . While handling a dri ve, av oid touching the connector . ■ Handle dri ves on surfaces that ha ve at least one inch of shock-proof foam. ■ A v oid dropping driv es from any height onto a[...]

4–4 Maintenance and Ser vice Guide Remov al and Replacement Preliminaries 4.4 Pre venting Electr ostatic Damage Many electronic components are sensiti ve to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensiti vity . Networks b uilt into man y integrated circuits provide some protection, b ut in many cases[...]

Remov al and Replacement Preliminaries Maintenance and Serv ice Guide 4–5 ■ Place reusable electrostatic-sensiti ve parts from assemblies in protecti ve packaging or non-conductiv e foam. ■ Use transporters and con ve yers made of antistatic belts and roller bushings. Ensure that mechanized equipment used for moving materials is wired to grou[...]

4–6 Maintenance and Ser vice Guide Remov al and Replacement Preliminaries 4.7 Gr ounding Equipment and Methods Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ■ When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megaohm ±10% res[...]

Remov al and Replacement Preliminaries Maintenance and Serv ice Guide 4–7 ■ Non-conducti ve plastic bags, tubes, or boxes ■ Metal tote boxes ■ Electrostatic voltage le vels and protecti ve materials T able 4-1 shows ho w humidity affects the electrostatic v oltage le vels generated by dif ferent activities. T able 4-2 lists the shielding pr[...]

Maintenance and Serv ice Guide 5–1 5 Remo v al and Replacement Pr ocedures This chapter provides remo val and replacement procedures. All scre ws remo ved during disassembly are P0 Phillips scre ws. There are four dif ferent sized screws that must be remo ved and replaced when servicing the computer . Make special note of the size and location of[...]

5–2 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.1 Serial Number Report the computer serial number to Compaq when requesting information or ordering spare parts. The serial number is located on the bottom of the computer (Figure 5-1). Figure 5–1: Serial Number Location[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–3 5.2 Disassembl y Sequence Char t Use the chart belo w to determine the section number to be referenced when removing computer components. T able 5-1 Disassembly Sequence Chart Section Description # of Screws Removed 5.3 Preparing the computer for disassemb ly 0 5.4 Computer fe[...]

5–4 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.3 Preparing the Computer f or Disassembl y Perform the follo wing steps before disassembling the computer . Consult the computer Har dwar e Guide for instructions on the follo wing steps: 1. T urn off the computer . 2. Disconnect the A C Adapter and all external de vices. 3.[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–5 5.4 Computer Feet The computer feet are adhesi ve-backed rubber pads. The computer feet are included in the Plastics Kit (spare part number 233562-001). Refer to Figure 5-2 for the computer feet locations. Figure 5–2: Replacing the Computer Feet Computer Feet Spare P ar t Nu[...]

5–6 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.5 LED Co ver 1. Prepare the computer for disassembly (Section 5.3). 2. T urn the computer top side up with the front facing you. 3. Open the computer . 4. Lift up the left edge of the LED cov er 1 (Figure 5-3). 5. Lift up the front edge of the LED cov er from left to right 2[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–7 5.6 Ke yboard 1. Prepare the computer for disassembly (Section 5.3). 2. Remov e the LED cover (Section 5.5). Keyb oa rd Spare P ar t Number Info rmation Ke yboards Arabic Belgian Czech Danish Fr e n c h F rench Canadian German Hebrew Hungarian International Italian Japanese 23[...]

5–8 Maintenance and Ser vice Guide Remov al and Replacement Procedures 3. Remov e the two M2.5 × 5 screws securing the k eyboard to the base enclosure 1 (Figure 5-4). 4. Swing the back edge of the ke yboard up and forward 2 until it rests on the top cov er . Figure 5–4: Removing the K eyboard Scre ws[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–9 5. Release the zero insertion force (ZIF) connector to which the ke yboard cable is connected 1 and disconnect the keyboard cable from the system board 2 (Figure 5-5). Figure 5–5: Disconnecting the Ke yboard Cable 6. Remov e the keyboard. Re verse the abov e procedure to ins[...]

5–10 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.7 Optical Drive 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) Optical Drives Spare P ar t Number Info rmation Optical drives 24X Max CD-ROM drive 8X[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–11 2. Remov e the M2.5 × 4.5 scre w that secures the optical dri v e to the heat sink 1 (Figure 5-6). 3. Push the back edge of the optical dri ve 2 to the right to disconnect it from the connector on the system board. 4. Slide the optical dri ve out of the base enclosure 3 . Fi[...]

5–12 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.8 Displa y ✎ When the display scre ws are removed, the display assembly is unsupported. Make sure to pro vide support for the display assembly when removing the display scre ws. 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the fo[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–13 4. Remov e the two M2.5 × 4.5 scre ws securing the hinge co v ers to the display hinges 1 (Figure 5-7). 5. Lift the hinge cov ers straight up to remove them 2 . Figure 5–7: Removing the Hinge Co vers ✎ The right and left hinge cov ers are included in the Plastics Kit and[...]

5–14 Maintenance and Ser vice Guide Remov al and Replacement Procedures 6. Position the computer with the front facing you. 7. Open the computer . 8. Remov e the M2.5 × 4.5 screw securing the display ground cable to the base enclosure 1 (Figure 5-8). 9. Disconnect the display video cable 2 . 10. Remov e the four M2.5 × 7 scre ws securing the di[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–15 ✎ T o ensure proper alignment of the display when replacing it, loosely install the scre ws in the 1 , 2 , 3 , 4 , 5 sequence indicated in Figure 5-9. After all scre ws have been loosely installed, tighten them. Figure 5–9: Installing the Display Scre ws Re verse the abov[...]

5–16 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.9 Heat Sink 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.8) ✎ The heat sink is secured to[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–17 2. Remov e the four M2.5 × 7 screws 1 and the M2.5 × 4.5 scre w 2 securing the heat sink to the base enclosure (Figure 5-10). Figure 5–10: Removing the Heat Sink Scre ws[...]

5–18 Maintenance and Ser vice Guide Remov al and Replacement Procedures 3. Lift the front edge of the heat sink and swing it up and back until the shield rests at a 45-degree angle 1 (Figure 5-11). 4. Pull the heat sink aw ay from the base enclosure at a 45-degree angle 2 and remo ve it from the base enclosure. Figure 5–11: Removing the Heat Si[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–19 Follo w these steps to replace a damaged thermal pad: a. Carefully peel the old thermal pad from the heat sink area. b . Use a plastic straight edge tool (such as a credit card) to remov e any thermal pad residue. Glue residue does not need to be totally remov ed. The glue us[...]

5–20 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.10 Pr ocessor 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Heat sink (Section 5.9) Processor Spare P ar t Numb[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–21 2. Slide the processor le ver to the left 1 and then swing it up and forward 2 until it is vertical (Figure 5-12). 3. Lift the outside edges of the processor straight up to remov e it from the system board 3 . ✎ When replacing the processor , make sure the processor is seat[...]

5–22 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.11 T op Cover 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.8) ❏ Heat sink (Section 5.9) 2[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–23 3. Remov e the 10 M2.5 × 7 screws 1 and the three M2.5 × 4.5 scre ws 2 securing the top cover to the base enclosure (Figure 5-13). Figure 5–13: Removing the T op Cover Scre ws[...]

5–24 Maintenance and Ser vice Guide Remov al and Replacement Procedures 4. T urn the computer top side up with the front facing you. 5. Disconnect the diskette dri ve cable from the lo w insertion force (LIF) connector on the system board 1 (Figure 5-14). 6. Disconnect the T ouchPad cable from the LIF connector on the system board 2 . 7. Remov e [...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–25 5.12 Diskette Drive 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.8) ❏ Heat sink (Section 5.[...]

5–26 Maintenance and Ser vice Guide Remov al and Replacement Procedures 3. Remov e the two M2.5 × 4.5 scre ws securing the diskette dri ve to the top cov er 1 (Figure 5-15). 4. Remov e the tape adhering the diskette driv e and T ouchPad cables to the top cov er 2 . 5. Remov e the diskette dri ve from the top cov er 3 . Figure 5–15: Removing th[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–27 5.13 T ouchP ad 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.8) ❏ Heat sink (Section 5.9) ?[...]

5–28 Maintenance and Ser vice Guide Remov al and Replacement Procedures 2. Remov e the M2.5 × 4.5 screw 1 securing the T ouchPad bracket to the top co ver (Figure 5-16). 3. Slide the T ouchPad bracket forward 2 . 4. Lift the T ouchPad bracket up and remov e it from the top cove r 3 . Figure 5–16: Removing the T ouchP ad Bracket[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–29 5. Remov e the T ouchPad board and cable from the top co ver (Figure 5-17). Figure 5–17: Removing the T ouchP ad Re verse the abov e procedure to install the T ouchPad.[...]

5–30 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.14 Har d Drive Ä CA UTION: T o pre v ent damage to the computer and hard drive and loss of inf or mation, shut down the computer bef ore removing the hard drive from the computer . Do not remove the hard drive while the computer is on, in Suspend (Standby), or in Hibernati[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–31 2. Remov e the three M2.5 × 5.5 screws 1 securing the hard dri ve and hard dri ve bracket to the base enclosure (Figure 5-18). 3. Remov e the hard driv e bracket 2 from the base enclosure. 4. Slide the hard dri ve to ward the front of the base enclosure 3 to disconnect it fr[...]

5–32 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.15 Disk Cell Real Time Cloc k (R TC) Batter y 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–33 2. Lift the edge of the battery to disconnect it from its socket (Figure 5-19). Figure 5–19: Removing the Disk Cell Battery Re verse the abov e procedure to install the disk cell R TC battery .[...]

5–34 Maintenance and Ser vice Guide Remov al and Replacement Procedures 5.16 F an 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.8) ❏ Heat sink (Section 5.9) ❏ T o[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–35 2. Remov e the two M2.5 × 4.5 scre ws 1 securing the fan bracket and fan to the system board (Figure 5-20). 3. Disconnect the fan cable from the system board 2 . 4. Remov e the fan brack et 3 and fan 4 from the base enclosure. Figure 5–20: Removing the F an Re verse the ab[...]

5–36 Maintenance and Ser vice Guide Remov al and Replacement Procedures ✎ When installing the fan, route the fan cable 1 under the clip 2 on the processor mount as indicated in Figure 5-21. Figure 5–21: Routing the Fan Cab le[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–37 5.17 System Boar d 1. Prepare the computer for disassembly (Section 5.3) and, in the order belo w , remove the follo wing components: ❏ LED cov er (Section 5.5) ❏ K eyboard (Section 5.6) ❏ Optical dri ve (Section 5.7) ❏ Display (Section 5.8) ❏ Heat sink (Section 5.9[...]

5–38 Maintenance and Ser vice Guide Remov al and Replacement Procedures 3. Remov e the four M2.5 × 7 screws from the bottom of the base enclosure securing the system board to the base enclosure (Figure 5-22). Figure 5–22: Removing the Exterior System Boar d Screws 4. T urn the base enclosure top side up with the front facing you.[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–39 5. Remov e the M2.5 × 5.5 screw 1 securing the optical dri ve alignment rail to the base enclosure (Figure 5-23). 6. Remov e the two M2.5 × 5.5 scre ws 2 securing the system board to the base enclosure. 7. Remov e the optical driv e alignment rail 3 . 8. Disconnect the micr[...]

5–40 Maintenance and Ser vice Guide Remov al and Replacement Procedures 9. Make sure the PC Card eject b utton 1 is fully depressed (Figure 5-24). 10. Lift up the front edge of the system board until the board is at a 45-degree angle 2 . 11. Pull the system board aw ay from the base enclosure at a 45-degree angle 3 . Figure 5–24: Removing the S[...]

Remov al and Replacement Procedures Maintenance and Serv ice Guide 5–41 ✎ When installing the system board, route the microphone cable 1 through the slot 2 on the right side of the system board as indicated in Figure 5-25. Figure 5–25: Routing the Microphone Cab le[...]

Maintenance and Serv ice Guide 6–1 6 Specifications This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Computer Dimensions Height Depth Width 12.5 in 1.7 in 9.8 in 318 mm 42 mm 248 mm W eight 7.1 to 7.4 lb depending on displa y configuration 3.2 to 3.4 kg depending on displa y configuration Standalone (Battery) P ower [...]

6–2 Maintenance and Ser vice Guide Specifications ✎ Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. Relative Humidity (non-condensing) Operating Nonoperating 20 to 80% 20 to 90%, 101.6°F/38.7°C maximum wet b ulb Altitude (unpressurized) Operating No[...]

Specifications Maintenance and Serv ice Guide 6–3 Ta b l e 6 - 2 14.1-inch XGA, TFT Displa y Dimensions Height Depth Width 8.42 in 11.22 in 14.10 in 21.40 cm 28.50 cm 35.81 cm Number of colors Up to 16.8 million Contrast ratio 180:1 Brightness >150 nits typical Pixel resolution Pitch Fo r ma t Configuration 1024 × 768 RGB vertical str ipe 0.2[...]

6–4 Maintenance and Ser vice Guide Specifications Ta b l e 6 - 3 12.1-inch SV GA, TFT Display Dimensions Height Depth Width 7.83 in 10.83 in 12.10 in 19.90 cm 27.50 cm 30.74 cm Number of colors Up to 16.8 million Contrast ratio 250:1 Brightness >120 nits typical Pixel resolution Pitch Fo r ma t Configuration 800 × 600 RGB vertical str ipe 0.3[...]

Specifications Maintenance and Serv ice Guide 6–5 T able 6-4 10.0-GB Hard Drive User capacity per drive 1 10.0 GB Drive height (with drive frame) 0.37 in 9.5 mm Drive width (with drive frame) 2.5 in 63.5 mm Interface type ATA - 4 Seek times (typical read, including setting) Single track A ver age Full stroke 2.5 ms 12.0 ms 23.0 ms User addressabl[...]

6–6 Maintenance and Ser vice Guide Specifications Physical configuration Cylinders 3 Heads Sectors per trac k 3 Bytes per sector 22784 2 293-560 512 User addressable sector s 3 19,640,880 Buffer size 3 512 KBytes Disk rotational speed 4200 r pm T ransfer rate Interface max (Mb ytes/sec) 2 Media (Mbits/sec) 3 66.6 109-20 1 1 GB = 1,000,000,000 byt[...]

Specifications Maintenance and Serv ice Guide 6–7 Ta b l e 6 - 5 Diskette Drive Diskette size 3.5 inch Light On system Height 0.5 in 12.7 mm Bytes per sector 512 Sectors per trac k High density Low density 18 (1.44 MB) 9 15 (1.2 MB) T racks per side High density Low density 80 80 Read/write heads 2 A verage seek times T rac k-to-track (high/low) [...]

6–8 Maintenance and Ser vice Guide Specifications T able 6-6 CD-ROM Drive Applicable disk CD-ROM (Mode 1, 2, and 3) CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R (read only) CD Plus Photo CD (single/multisession) CD-Extra Video CD CD-WO (fix ed pack ets only) CD-Bridge Center hole diameter .59 in 15 mm Disk diamete[...]

Specifications Maintenance and Serv ice Guide 6–9 T able 6-7 DV D - RO M D r i v e Applicable disk D VD-5, D VD-9, D VD-10 CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R (read only) CD Plus Photo CD (single/multisession) CD-Bridge Center hole diameter .59 in 15 mm Disk diamete[...]

6–10 Maintenance and Ser vice Guide Specifications T able 6-8 AC A d a p t e r W eight 0.45 lb 0.21 kg P ower supply (input) Operating v oltage Operating current Operating frequency range Maximum transient 100 to 240 V A C RMS Nominal 1.5 A RMS 50 to 60 Hz Nominal 4/50 kV[...]

Specifications Maintenance and Serv ice Guide 6–11 T able 6-9 Battery Pac ks Dimensions Lithium ion (Li ion) Height Length Width We ig h t Cells Nick el Metal Hydride (NiMH) Height Length Width We ig h t Cells 0.83 in 3.15 in 6.55 in 0.97 lb 9 Li ion 0.83 in 3.15 in 6.55 in 0.1.32 lb 9 NiMH 21 mm 166 81 0.44 kg 21 mm 166 81 0.60 kg Energ y Li ion[...]

6–12 Maintenance and Ser vice Guide Specifications T able 6-10 System DMA Hard ware DMA System Function DMA0 Av ailable f or audio DMA1 Enter tainment audio (default; alternate = DMA0, DMA3, none) DMA2 Diskette drive DMA3 ECP parallel por t LPT1 (default; alternate = DMA0, none) DMA4 DMA controller cascading (not availab le) DMA5 Av ailable f or [...]

Specifications Maintenance and Serv ice Guide 6–13 T able 6-11 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 K eyboard controller IRQ2 Cascaded IRQ3 COM2 IRQ4 COM1 IRQ5 A udio (default)* IRQ6 Disk ette dr iv e IRQ7 P arallel por t IRQ8 Real time cloc k (RTC) IRQ9 Infrared IRQ10 S ystem use IRQ11 S ystem use IRQ12 Inter na[...]

6–14 Maintenance and Ser vice Guide Specifications T able 6-12 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 000 - 00F DMA controller no . 1 010 - 01F unused 020 - 021 Interr upt controller no . 1 022 - 024 Opti chipset configuration registers 025 - 03F unused 02E - 02F 87334 “Super IO” configuration f or CP[...]

Specifications Maintenance and Serv ice Guide 6–15 I/O Address (he x) System Function (shipping configuration) 0A2 - 0BF un used 0C0 - 0DF DMA controller no . 2 0E0 - 0EF un used 0F0 - 0F1 Coprocessor b usy clear/reset 0F2 - 0FF unused 100 - 16F unused 170 - 177 Secondar y fixed disk controller 178 - 1EF unused 1F0 - 1F7 Primary fixed disk contro[...]

6–16 Maintenance and Ser vice Guide Specifications I/O Address (he x) System Function (shipping configuration) 2F0 - 2F7 un used 2F8 - 2FF Infrared port 300 - 31F unused 320 - 36F unused 370 - 377 Secondar y diskette drive controller 378 - 37F P arallel por t (LPT1/def ault) 380 - 387 unused 388 - 38B FM synthesiz er - OPL3 38C - 3AF unused 3B0 -[...]

Specifications Maintenance and Serv ice Guide 6–17 T able 6-13 System Memory Map Size Memory Address System Function 640 K 00000000 - 0009FFFF Base memory 128 K 000A0000 - 000BFFFF Video memor y 48 K 000C0000 - 000CBFFF Video BIOS 160 K 000C8000 - 000E7FFF unused 64 K 000E8000 - 000FFFFF System BIOS 15 M 00100000 - 00FFFFFF Extended memor y 58 M [...]

Maintenance and Serv ice Guide A–1 A Connector Pin Assignments Ta b l e A - 1 Stereo Speaker/Headphone Pin Signal Pin Signal 1 A udio out 2 Ground 2 1 Ta b l e A - 2 Microphone Pin Signal Pin Signal 1 A udio in 2 Ground 2 1[...]

A – 2 Maintenance and Ser vice Guide Connector Pin Assignments Ta b l e A - 3 Keyb oa rd/ Mou se Pin Signal Pin Signal 1 K eyboard/mouse data1 4 +5 VDC 2 K eyboard/mouse data2 5 K eyboard/mouse clock1 3 Ground 6 Ke yboard/mouse clock2 KEY 6 5 4 3 2 1 Ta b l e A - 4 RJ-11 Modem Pin Signal Pin Signal 1U n u s e d 4 U n u s e d 2 Tip 5 Unused 3R i n[...]

Connector Pin Assignments Maintenance and Serv ice Guide A – 3 Ta b l e A - 5 RJ-45 Network Interface Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit - 6 Receive - 3 Receive + 7 Unused 4U n u s e d 8 U n u s e d 6 5 4 3 2 1 7 8 Ta b l e A - 6 Universal Serial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data - 4 Ground[...]

A – 4 Maintenance and Ser vice Guide Connector Pin Assignments Ta b l e A - 7 Serial Pin Signal Pin Signal 1 Carrier detect 6 Data set ready 2 Receiv e data 7 Ready to send 3 T ransmit data 8 Clear to send 4 Data terminal ready 9 Ring indicator 5 Signal ground 1 6 9 5[...]

Connector Pin Assignments Maintenance and Serv ice Guide A – 5 Ta b l e A - 8 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect 4 Not connected 12 DDC 2B data 5 Ground 13 Horizontal sync 6 Ground analog 14 V er tical sync 7 Ground analog 15 DDC2B clock 8 Ground analog 1 6 11 5 10[...]

A – 6 Maintenance and Ser vice Guide Connector Pin Assignments Ta b l e A - 9 Pa ra l l el Pin Signal Pin Signal 1 Strobe* 10 Ackno wledge* 2 Data bit 0 11 Busy 3 Data bit 1 12 P aper out 4 Data bit 2 13 Select 5 Data bit 3 14 A uto line fe ed* 6 Data bit 4 15 Error* 7 Data bit 5 16 Initializ e pr inter* 8 Data bit 6 17 Select in* 9 Data bit 7 18[...]

Maintenance and Serv ice Guide B – 1 B P o wer Cor d Set Requirements 3-Conductor P ower Cor d Set The wide range input feature of the Compaq Armada M700 Series of Personal Computers permits it to operate from any line voltage from 100 to 120 or 220 to 240 v olts A C. The po wer cord set receiv ed with the computer meets the requirements for use [...]

B – 2 Maintenance and Ser vice Guide P ower Cord Set Requirements 3. The po wer cord set must ha ve a minimum current capacity of 10A and a nominal voltage rating of 125 or 250 v olts A C, as required by each country ’ s po wer system. 4. The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 con[...]

P ower Cord Set Requirements Maintenance and Serv ice Guide B – 3 Notes 1. The flexible cord must be <HAR> T ype HO5VV -F , 3-conductor , 1.0 mm 2 conductor size. Po wer cord set fittings (appliance coupler and wall plug) must bear the certif ication mark of the agency responsible for e valuation in the country where it will be used. 2. The[...]

Maintenance and Serv ice Guide C – 1 C Scre w Listing This appendix provides specif ication and reference information for the scre ws used in the Compaq Armada 110 Series. All screws listed in this appendix are av ailable in the Miscellaneous Screw Kit, spare part number 233656-001. Ta b l e C - 1 M2.5 × 5 Screw Color Qty Length Thread Head Widt[...]

C – 2 Maintenance and Ser vice Guide Ta b l e C - 2 M2.5 × 4.5 Screw Color Qty Length Thread Head Width Black 15 4 .5 mm M2.5 4 mm Where used : 2 screws securing the hinge cov ers to the display hinges (documented in Section 5.6).[...]

Maintenance and Serv ice Guide C – 3 Ta b l e C - 2 M2.5 × 4.5 Screw (Continued) Color Qty Length Thread Head Width Black 15 4 .5 mm M2.5 4 mm Where used : 1 1 screw securing the optical drive to the heat sink (documented in Section 5.8) 2 1 screw securing the displa y ground cable to the base enclosure (documented in Section 5.9) 3 1 screw secu[...]

C – 4 Maintenance and Ser vice Guide Ta b l e C - 2 M2.5 × 4.5 Screw (Continued) Color Qty Length Thread Head Width Black 15 4 .5 mm M2.5 4 mm Where used : 1 3 screws securing the top cov er to the base enclosure through the batter y ba y (documented in Section 5.11) 2 2 screws securing the top cov er to the base enclosure through the top (docum[...]

Maintenance and Serv ice Guide C – 5 Ta b l e C - 2 M2.5 × 4.5 Screw (Continued) Color Qty Length Thread Head Width Black 15 4 .5 mm M2.5 4 mm Where used : 1 2 screws securing the disk ette dr iv e to the top co ver (documented in Section 5.12) 2 1 screw securing the T ouchP ad to the top cov er (documented in Section 5.13)[...]

C – 6 Maintenance and Ser vice Guide Ta b l e C - 2 M2.5 × 4.5 Screw (Continued) Color Qty Length Thread Head Width Black 15 4 .5 mm M2.5 4 mm Where used : 2 screws securing the f an and fan brac ket to the base enclosure (documented in Section 5.16)[...]

Maintenance and Serv ice Guide C – 7 Ta b l e C - 3 M2.5 × 7 Screw Color Qty Length Thread Head Width Black 25 7 mm M2.5 4.5 mm Where used : 1 screw securing the modem/network interface card compartment cover to the base enclosure (ref er to the Hardware Guide included with the computer f or installation procedure) 2 screws securing the memor y [...]

C – 8 Maintenance and Ser vice Guide Ta b l e C - 3 M2.5 × 7 Screw (Continued) Color Qty Length Thread Head Width Black 25 7 mm M2.5 4.5 mm Where used : 1 4 screws securing the heat sink to the base assemb ly (documented in Section 5.10) 2 10 screws securing the top cov er to the base enclosure through the bottom of the computer (documented in S[...]

Maintenance and Serv ice Guide C – 9 Ta b l e C - 3 M2.5 × 7 Screw (Continued) Color Qty Length Thread Head Width Black 25 7 mm M2.5 4.5 mm Where used : 4 screws securing the system board to the base enclosure through the computer bottom (documented in Section 5.17)[...]

C – 10 Maintenance and Ser vice Guide Ta b l e C - 4 M2.5 × 5.5 Screw Color Qty Length Thread Head Width Black 6 5.5 mm M2.5 4.5 mm Where used : 1 3 screws securing the hard drive and hard driv e brack et to the base enclosure (documented in Section 5.14) 2 1 screw securing the optical drive alignment r ail to the base enclosure (documented in S[...]

Maintenance and Serv ice Guide Index – 1 Inde x A AC adapter spare part numbers 3 – 11 specifications 6 – 10 B base enclosure illustrated 3 – 4 spare part number 3 – 5 battery illustrated 3 – 4 release latch 1 – 17 spare part number 3 – 5 specifications 6 – 11 batteyr light 1 – 15 C Cable Kit components 3 – 8 spare part number[...]

Index – 2 Maintenance and Service Guide Inde x connector pin assignments A – 1 headphone jack A – 1 keyboard connector A – 2 microphone jack A – 1 modem jack A – 2 monitor connector A – 5 mouse connector A – 2 network interface jack A – 3 parallel connector A – 6 RJ-11 jack A – 2 RJ-45 jack A – 3 serial connector A – 4 spe[...]

Inde x Maintenance and Serv ice Guide Index – 3 spare part number 3 – 5 , 5 – 34 vent 1 – 17 Fn key 1 – 13 front label area 1 – 17 G grounding equipment 4 – 6 methods 4 – 6 H hard drive bracket illustrated 3 – 7 removal 5 – 31 illustrated 3 – 9 light 1 – 14 removal 5 – 30 spare part number 3 – 5 , 5 – 30 specifications[...]

Index – 4 Maintenance and Service Guide Inde x memory map specifications 6 – 17 microphone 1 – 15 cable disconnecting 5 – 39 routing 5 – 41 jack 1 – 10 pin assignments A – 1 Microsoft logo key 1 – 13 mini PCI slot cover 1 – 17 illustrated 3 – 6 modem adapter, spare part numbers 3 – 10 cable adapter, spare part numbers 3 – 10[...]

Inde x Maintenance and Serv ice Guide Index – 5 R removal preliminaries 4 – 1 procedures 5 – 1 replacement preliminaries 4 – 1 procedures 5 – 1 RJ-11 cable, illustrated 3 – 8 cover, illustrated 3 – 6 jack 1 – 11 pin assignments A – 2 P55 adapter spare part numbers 3 – 10 PTT adapter spare part number 3 – 10 RJ-45 cable, illust[...]

Index – 6 Maintenance and Service Guide Inde x TouchPad 1 – 15 bracket 5 – 28 buttons 1 – 15 cable illustrated 3 – 8 removal 5 – 24 illustrated 3 – 2 removal 5 – 27 spare part number 3 – 3 , 5 – 27 transporting precautions 4 – 4 troubleshooting 2 – 1 U universal serial bus (USB) connector 1 – 11 pin assignments A – 3 V v[...]