Français dropdown-ico

Crestron electronic IPAC-GL1 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Crestron electronic IPAC-GL1. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Crestron electronic IPAC-GL1 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Crestron electronic IPAC-GL1 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Crestron electronic IPAC-GL1 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Crestron electronic IPAC-GL1
- nom du fabricant et année de fabrication Crestron electronic IPAC-GL1
- instructions d'utilisation, de réglage et d’entretien de l'équipement Crestron electronic IPAC-GL1
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Crestron electronic IPAC-GL1 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Crestron electronic IPAC-GL1 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Crestron electronic en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Crestron electronic IPAC-GL1, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Crestron electronic IPAC-GL1, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Crestron electronic IPAC-GL1. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Crestron Green Light ® Commercial Lighting Design Guide[...]

  • Page 2

    © 2009 Crestron Electronics Inc. 15 Volvo Drive Rockleigh, NJ 07647 800.237.2041 www.crestron.com For Residential Lighting Solutions, refer to Doc. 5999 All brand names, product names, and trademarks are the sole property of their respective owners.[...]

  • Page 3

    Crestron Commercial Lighting De sign Guide Contents I NTRODUCTION .................................................................. 1  C RESTRON C ONTROL T ECHNOLOGY ..................................... 2  T HE S INGLE S OLUTION C ONTROL S YSTEM ........................... 2  S YSTEM D ESIGN ..............................................[...]

  • Page 4

    [...]

  • Page 5

    Crestron Commercial Lighting De sign Guide Introduction Doc. 4775A 1 Introduction Crestron is the world's leading manufacturer of advanced control technologies. Our developments in combining touchpanel technology with lighting control applications were the very first of their kind. Only Crestron brings the most comprehensive line of user- inte[...]

  • Page 6

    Introduction Crestron Comme rcial Lighting Design Guide Doc. 4775A 2 Crestron Control Technology View precise lighting levels, temperature and shade positions in any room throughout the installation, graphically and quantitatively, from any touchpanel or PC. Monitor and track current and historical device usage and intelligently manage resources. E[...]

  • Page 7

    Crestron Commercia l Lighting Design Guid e System Design Doc. 4775A 3 System Design The applied lighting control strategy determines the basic methods used to control the environment. When formulating an overall strategy, there are some basic considerations:.  New construction and major renovations provide the opportunity to easily run control [...]

  • Page 8

    Crestron Commercia l Lighting Design Guid e System Design Doc. 4775A 4 Lighting System De sign Types There are many ways in which a Crestron lighting control system can be organized. Construction type, client requirements, architectural restrictions, and many other factors determine the best solution. In general, retaining Crestron control design f[...]

  • Page 9

    Crestron Commercia l Lighting Design Guid e System Design Doc 4775A 5 Centralized Wired Systems A centralized system is one in which all the high-voltage circuits are terminated within a Crestron automation enclosure and operate under a central control system. In a centralized design, the high voltage lighting, fans, motors and switch circuits are [...]

  • Page 10

    System Design Crestron Commercial l Lighting Design Guide Doc. Doc 4775A 6 Decentralized Wired Systems A decentralized system is the traditional wiring system of individual lighting circuits with local control. In the traditional distributed design wiring method, Crestron wall box dimmers can be retrofitted into a project after routine high voltage[...]

  • Page 11

    Crestron Commercia l Lighting Design Guid e System Design Doc 4775A 7 Hybrid Systems The most efficient and attractive lighting system designs are a hybrid of centralized processing and distributed dimmers. This provides the reliability of local control along with sophisticated centralized control, and limits the amount of wall clutter A complete C[...]

  • Page 12

    Crestron Commercia l Lighting Design Guid e Specifying a Lighting System Doc. 4775A 8 Specifying a Lighting System The Load Schedule A lighting system design begins with a collection of complete information. This includes a detailed floor plan identifying all of the required elements. The first element of design, the load schedule, is developed fro[...]

  • Page 13

    Crestron Comm ercial Lighting De sign Guide S pecifying a Lig hting System Doc 4775A 9 Example Load Schedule wi th Panel Terminations Area Room Controlled Ckt Name Controlled Ckt No. Fixture Load Type Dim Emergency Fixture Watts Fixture Qty Total Watts Enclosure Slot Module Output Main Floor Bathroom 1 Downlights 009 Downlights Inca ndescent yes no[...]

  • Page 14

    Specifying a Lighti ng System Crestron C ommercial Lighting D esign Guide Doc. Doc 4775A 10 Commercial Lighting Wirin g Plan The wiring plan includes all enclosures and the interconnecting wiring. The designer determines the location of the enclosure(s), the route of keypad and touchpanel connections to the enclosure(s), the route of the interconne[...]

  • Page 15

    Crestron Commercial Lighting D esign Guide Gree n Light Power S witching Doc. 4775A 11 Green Light Power Switching C restron Green Light Power Switching is a family of switching systems designed for control of lighting in office buildings, warehouses, parking garag es, sports facilit ies, public sp aces, and anywhere centralized switching is requir[...]

  • Page 16

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 12 modular relays f or an extra l evel of flexibili ty switching 12 0, 277, and 347 vol t loads. In addition to switching, some Green Light Power Switch ing panels also allow the option to add dimming control for 0-10V dimmable fluorescent ballasts . The IPAC-GL1 Cont[...]

  • Page 17

    Crestron Commercia l Lighting Design Guid e Gr een Light Pow er Switching Doc 4775A 13 Crestron Green Light Power Switc hing Panels are available in f ive basic configur ations. Use t o the following cross-refer ence ta ble to begin specifying the configurat ion that fits your application. This table represents the full line of Crestron Gr een Ligh[...]

  • Page 18

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 14 GLPS-HSW Green Light Power Switching Panels (MLO) Main Lu g Only and (MCB) Main Circuit Breaker Zero-Cross Arcless Relays The GLPS-HSW Power Swi tching Pan els come standard with 20A branch circuit break ers, and accept 208Y/120 or 480Y/277 volt fe eds terminatin g[...]

  • Page 19

    Crestron Commercia l Lighting Design Guid e Gr een Light Pow er Switching Doc 4775A 15 Feed Ty pe : Choose one of the foll owing to specif y the type of feed: MLO Main lug only MCB60 60A back-fed ma in circuit breaker MCB80 80A back-fed ma in circuit breaker MCB100 100A back-fed main circuit break er MCB125 125A back-fed main circuit break er (avai[...]

  • Page 20

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 16 GLPS-HSW (Continued) SPECIFICATIONS Load Rat ings Switch Chan nels: 8 to 42 d epending upon p anel siz e and options, each chann el phase- indepen dent Maximum per Channel: 16 Amps @ 100 to 277 V olts AC, 50/60 Hz; 1/2 HP @ 120 Volts, 1 HP @ 277 Volts Switched Lo a[...]

  • Page 21

    Crestron Commercia l Lighting Design Guid e Gree n Light Power S witching Doc. 4775A 17 GLPS-SW Green Light Power Switching Panels (MLO) Main Lug Only and (MCB) Main Circuit Breaker w/Standard High-Inrush Relays The GLPS-SW Power Switching Panels come standard with 20A branch circuit break ers, and accept 208Y/120 or 480Y/277 volt fe eds terminatin[...]

  • Page 22

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 18 Support Services for 400A feed an d other main circ uit breaker options. Number of Circu its : Choose one of t he following numeric values from the a ppropriate column to specify the n umber of controlled circuit s in the panel: Note: “ Small, ” “ Medium, ”[...]

  • Page 23

    Crestron Commercia l Lighting Design Guid e Gree n Light Power S witching Doc. 4775A 19 GLPS-SW (CONTINUED) SPECIFIC ATIONS Load Ratings Switch Channels: 10 to 42 depend ing upon panel size and options, each channel phase-independent Maximum per Channel: 1 6 Amps @ 100 to 27 7 Volts AC, 50/60 Hz; 1 HP @ 120 Volts, 2 HP @ 277 Volts Switched Load Typ[...]

  • Page 24

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 20 GLPS-HSW-FT Green Light Express Feed-Through Power Switching Panels w/Zero-Cross Arcless Relays The GLPS-HSW-FT panels utilize Crestron zero-cross arcless relay technology, achieving a relay lifetime of one million cycles. A high-current triac is employed to handle[...]

  • Page 25

    Crestron Commercial Lighting Design Guide Green Light Power Switching Doc 4775A 21 GLPS-HSW-FT (Cont inued) SPECIFIC ATIONS Load Ratings Switch Ch annels: 8 to 32 de pending upon panel size and options, each channel phase-independent Maximum per Channel: 1 6 Amps @ 100 to 27 7 Volts AC, 50/60 Hz; 1/2 HP @ 120 Volts, 1 HP @ 277 Volt s Switched Load [...]

  • Page 26

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 22 GLPS-SW-FT Green Light Express Feed- Through Power Switching Pa nels w/Standard Hi gh-Inrush Relays The GLPS-SW-FT Power Switching Panels are desig ned for use with a separate circuit breaker panel. Two "feed- through" panel sizes are availabl e, configur[...]

  • Page 27

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 23 GLPS-SW-FT (Continued) SPECIFIC ATIONS Load Ratings Switch Ch annels: 8 to 56 de pending upon panel size and options, each channel phase-independent Maximum per Channel: 1 6 Amps @ 100 to 27 7 Volts AC, 50/60 Hz; 1 HP @ 120 Volts, 2 HP @ 277 Volt s Switched Load Ty[...]

  • Page 28

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 24 GLPS-HDSW-FT Green Light Express Feed-Through Power Switching Panels w/Modular High- Inrush Relays The GLPS-HDSW-FT Power Switching Panels are desig ned for use with a separate circuit breaker pane l. Two "feed- through" panel sizes are availabl e, config[...]

  • Page 29

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 25 GLPS-HD SW-FT (Continued) SPECIFIC ATIONS Load Ratings Switch Chann els: 8 to 56 s ingle-pole, 4 -28 double-pole , depending upon panel size and relay combination s, each channel phase-independent Maximum per Channel: 2 0 Amps @ 100 to 34 7 Volts AC, 50/60 Hz; 1/2 [...]

  • Page 30

    Green Light Power Switching Cres tron Commercial Lighting De sign Guide Doc.4775A 26 IPAC-GL1 Integrated Professiona l Automation Computer for Green Light Power Switching  Wall mount lig hting control processor  Crestron 2-Se ries control engine  Easy system programming via LCD front p anel  7 programmable button s with LED feedback [...]

  • Page 31

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 27 IPAC-GL1 (Continued) SPECIFIC ATIONS Processor CPU: 32-bi t Freescale ColdFire ® Microprocessor Memory SDRAM: 32 MB NVRAM: 1 MB Flash: 8 MB Power Failure Memory: 10 year s Time Clock Accuracy: ± 1 minute per year Operating Syste m Real-time, preemptive multi- thr[...]

  • Page 32

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 28 GLA-PWS50 Wall Mount 50 Watt Cresnet Power Supply The GLA-PWS5 0 is a 50 watt Cr esnet power supply designed for use with a Cr estron Green L ight system, or anywhere a wall-mountable Cresnet powe r supply is needed. The GLA- PWS50 mounts conveniently over a 4"[...]

  • Page 33

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 29 GLS-PLS - 120/277 Power Loss Sensor The GLS-PLS-120/277 is a 3- Phase Power Loss Sensor designed for use with Crestron Green Light ™ systems to activate Override mode during a p ower failure. In response to a signal from the GLS-PLS-1 20/277, the lighting system [...]

  • Page 34

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 30 Dimensions GLEP-HSW & GLEP-SW Small Panel[...]

  • Page 35

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 31 DIMENSIONS (continued) GLEP-HSW & GLEP -SW Medium Pa nel[...]

  • Page 36

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 32 DIMENSIONS (continued) GLEP-HSW & GLEP -SW Large Panel[...]

  • Page 37

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 33 DIMENSIONS (continued) GLEP-HSW & GLEP -SW Extra Large Panel[...]

  • Page 38

    Green Light Power Swit ching Crestron Commercial Lighting D esign Guide Doc.4775A 34 DIMENSIONS (continued) GLEP-HSW-FT, GL EP-SW-FT, & GL EP-HDSW-FT Pane ls[...]

  • Page 39

    Crestron Commercial Lightin g Design Guide Gre en Light Power Switching Doc 4775A 35 Dimensions (CONTIN UED) IPAC-GL1[...]

  • Page 40

    CAEN Enclosures Crestron C ommercial Lighting D esign Guide Doc.4775A 36 Green Light Options CAEN- Series Enclosures The CAEN Series automation enclosures are designed to house the Crestron CLX-series of lighting and motor control modules and PAC2 or PAC2M control systems. CAEN enclosures are available in an assortment of sizes, suitable for surfac[...]

  • Page 41

    Crestron Comm ercial Lighting Design Guide CAEN Enclosures Doc 4775A 37 CAEN-Series Enclosure Specifications CAEN Model 7X2* 7X1 4X2* 4X1 2X1 Module Capacity 14 7 8 4 2 Required Flush M ount Opening (Width) x (Height) 25 ½” x 62 ” 14 ⅜ ” x 62 ” 25 ½” x 38 ⅞ ” 14 ⅜ ” x 38 ⅞ ” 14 ⅜ ” x 23 ½” Construction 16 gauge galv[...]

  • Page 42

    CAEN Enclosures Crestron C ommercial Lighting D esign Guide Doc.4775A 38 CAEN Installation In accordance with all national and local codes a licensed electrician must mount the enclosure. Special attention must be made to NEC Article 110.26(A)(2) concerning minimum work space requirements. When choosing components to place in CAEN enclosures, refer[...]

  • Page 43

    Crestron Residential Lighting Design Guide GreenLight Options–CAEN Enclosures Doc 4775A 39 CAEN Wiring CAUTION: All power feeds must be protected by 15 or 20 amp circuit breakers (supplied by others). NOTES: Use copper conductors only – rated 75°C All wiring must be installed in accordance with all local and national electrical codes. Two snap[...]

  • Page 44

    Crestron Commercia l Lighting Design Guid e GreenLight Options–CAEN Enclosures Doc. 4775A 40 Universal Mounting Pla tes Crestron Universal Mounting Plates (CAEN-UMP Series) are a complete line of accessory plates, which allow mounting of non-Crestron equipment to any Crestron A utomation Enclosure (CAEN Series). Third-party products such as phone[...]

  • Page 45

    Crestron Residential Lighting Design Guide GreenLight Options–CAEN Enclosures Doc 4775A 41 Cover Extension Kits The Cover Extension Kits are designed to increase the overall depth of the automation enclosures by 1.5 inches. Adding depth to these enclosures accommodates excess wiring and third-party devices that may not normally fit in the standar[...]

  • Page 46

    Crestron Commercia l Lighting Design Guid e GreenLight Options–CAEN Enclosures Doc. 4775A 42 CLX Lighting Control Modu les Concealed in Crestron automation cabinets, the CLX-series devices are rigorously built using oversized heat sinks for ultimate reliability.  Split-bobbin transformers and ground-referenced electronics deliver superior perf[...]

  • Page 47

    Crestron Residential Lighting Design Guide GreenLight Options–CAEN Enclosures Doc 4775A 43 CLX-Series Lighting Control Modules Model Load Rating CLX-1DELV4 Four channels of dimming for electronic low voltage and incandescent loads Each channel is rated for 1200 watts, with a total module rating of 1920 watts when fed from a 20A breaker. A to tal [...]

  • Page 48

    Crestron Commercia l Lighting Design Guid e GreenLight Options–CAEN Enclosures Doc. 4775A 44 Terminal Blocks and Modu les The Crestron CLT terminal blocks and modules are considered a single entity and must be used together. In field-assembled panels, they ship separately to permit termination of the field wiring to the terminal block prior to th[...]

  • Page 49

    Crestron Residential Lighting Design Guide GreenLight Options–CAEN Enclosures Doc 4775A 45 Module Installation In accordance with all national and local codes a licensed electrician, , must mount the terminal blocks and modules in field-assembled Crestron Automation Enclosures. Terminal blocks are installed along the left side of single- wide enc[...]

  • Page 50

    Crestron Commercia l Lighting Design Guid e DIN Rail Products Doc. Doc 4775A 46 Cresnet® Terminal Block for CAEN Automation Enclosures The CAEN-BLOCK is a Cresnet term inal block designed specifically for Crestron lighting and automation systems to link remote enclosures to the central PAC2 or PAC2M control system. The CAEN-BLOCK mounts at the bot[...]

  • Page 51

    Green Light Options–CAEN Enclos ures Crestr on Commercial Lightin g Design Guide Doc 4775A 47 NOTE: If more than 50 watts of power is drawn by connected devices, supplemental power supplies are required.[...]

  • Page 52

    Crestron Commercial Lighting Design Guide DIN Rail Products Doc. Doc 4775A 48 Crestron DIN Rail Products Features  Popular in Europe and ideal for MDU applications  High voltage units rated for use up to 240VAC, 50/60Hz  Integrated Emergency Override Mode  Mix and match Crestron and 3 rd party products in oOne enclosure DIN Rail Install[...]

  • Page 53

    Crestron Commercia l Lighting Design Guid e DIN Rail Products Doc 4775A 49 Example DIN Rail System[...]

  • Page 54

    Crestron Comm ercial l Lightin g Design Guid e DIN Rail Products Doc. Doc 4775A 50 DIN-AP2 The DIN-AP2 is a 2-Series control processor designed for small to medium-sized lighting and automation applications. DIN Rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN R[...]

  • Page 55

    Commercial Lighting Design Guid e DIN Rail Products Doc. 4775A 51 DIN-1DIMU4 The DIN-1DIMU4 is a 4-channel universal lighting control module designed to support dimming of both forward and reverse phase type loads. A single model supports 120 and 220-240 volt electronic and magnetic low voltage, incandescent, neon/cold cathode, 2-wire dimmable fluo[...]

  • Page 56

    Crestron Commercial Lighting De sign Guide DIN Rail Products Doc 4775A 52 DIN-8SW8 The DIN-8SW8 is an 8-channel high voltage lighting control module designed to support switching of non-dimmable lighting and fans. A single model supports both 120 and 220- 240 volt applications. Each channel handles incandescent loads up to 10 amps, fluorescent load[...]

  • Page 57

    Crestron Commercia l Lighting Design Guid e DIN Rail Products Doc 4775A 53 DIN-AO8 The DIN-AO8 is a DIN Rail-mounted automation control module that provides eight analog output ports for interfacing with thi rd-party lighting and heating/cooling systems. Analog Outputs Each analog output port provides a 0 to 10 volt DC control signal ideally suited[...]

  • Page 58

    Crestron Commercial Lighting De sign Guide DIN Rail Products Doc 4775A 54 DIN-BLOCK The DIN-BLOCK is a DIN Rail-mo unted Cresnet® distribution block designed to facilitate the termination of Cresnet wiring at a head end or distribution point. DIN Rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control[...]

  • Page 59

    Crestron Commercia l Lighting Design Guid e DIN Rail Products Doc 4775A 55 DIN-HUB The DIN-HUB is a DIN Rail-mounted Cresnet® hub designed to facilitate the configuration of large Cresnet networks. DIN Rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN Rail mount[...]

  • Page 60

    Residential Lighting D esign Guide User Interf aces Doc. 4775A 56 Interface Equipment Integrating your lighting with A/V controls, shade control, security systems, and HVAC through a single system have never been easier. Crestron provides the ultimate, fully integrated lighting control solution for any application.  Dimming control  Switched [...]

  • Page 61

    User Interfaces Commercial Lighting Design Guide Doc 4775A 57 Wall Mount Touchpanels TPS Series Isys ®  Available in 12”(TPS-12L), 15”(TPS-15L) and 17”(TPS-17L) widescreen  24-Bit Isys graphics | 1280 x 768 resolution  DNav dynamic menu objects  Full-motion video with gamma correction  Interactive annotation capability  Bui[...]

  • Page 62

    Doc 4775A 58 TPS-4000L  10.4" active matrix touchscreen display  Isys® graphics engine with 640 x 480 resolution  High performance video with gamma correction  Built-in amplified speakers and microphone  5 engravable hardbuttons | Built-in light sensor  Stylish flush mount design | Optional rack mount  Cresnet® communica[...]

  • Page 63

    Doc 4775A 59 Tilt Touchpanels TPS Series Isys ®  Available in 12"(TPS-12L), 15"(TPS-15L) and 17" (TPS-17L) widescreen  24-bit Isys graphics | 1280 x 768 resolution  DNav dynamic menu objects  Full-motion video with gamma correction  Interactive annotation capability  Built-in biamplified speaker system and micropho[...]

  • Page 64

    Doc 4775A 60 TPMC Series Isys i/O WiFi Touchpanels TPMC-8T  8.4" active matrix touchscreen display  16-bit Isys i/O graphics | 800 x 600 resolution  Synapse image rendering algorithm  DNav dynamic menu objects  Windows XP Embedded operating system  Onboard PC applications for Web browsing, streaming media, conferencing, VoIP,[...]

  • Page 65

    Doc 4775A 61 Wireless Touchpanels and Handhelds TPS-6X  Elegant high gloss black or white, or matte black finishes  Non-slip rubber grips on rear  Illuminated buttons and engravable backlit text  5.7" active matrix color touchscreen display  16-bit Isys® graphics | 640 x 480 resolution  Dynamic graphics and text capability ?[...]

  • Page 66

    Doc 4775A 62 Keypads C2N-DB Series Decorator Keypads Crestron C2N-DB Decorator Series keypads deliver versatile keypad control with contemporary styling to support a broad range of residential and commercial applications from lighting to AV distribution. A vailable in configurations of 6, 8, or 12 buttons, Decorator keypads are designed to allow in[...]

  • Page 67

    Doc 4775A 63 CNX Designer Series Keypads The CNX-B Designer series wall mount keypads are available in configurations of 2, 4, 6, 8, or 12 buttons. Buttons are large for optimal ergonomics. Each model mounts in a standard electrical gang box and includes a matching 1-gang faceplate. Optional 2 and 3-gang faceplates are available to allow up to thre[...]

  • Page 68

    Doc 4775A 64 Cameo™ Crestron Cameo presents a fresh, innovative concept in keypad design featuring an incredibly small footprint and slim profile with versatile button configurations. C ameo Standar d Moun t T he C2N-CBD-TS is a standard mount model designed for installation in a c onventional electrical gang-box using a Decora® style faceplate [...]

  • Page 69

    Doc 4775A 65 Cameo ™ Mounting Options Cameo Flush Mount Using the supplied template, carefully cut the hole for the Cameo keypad. After the keypad is connected to Cresnet®, insert it in the hole. The spring clip holds the keypad in place. Cameo Standar d Mount Standard mount keypads fit in a standard single-gang box. Finish the installation with[...]

  • Page 70

    iLux Integrated Lighting Co ntrol System Doc 4775A 66 iLux Integrated Lighting Control System iLux is compliant with ASHRAE Standard 90.1-2004 All CLS Units are CEC Title 24 Listed iLux is a complete, integrated lighting system designed for wall mount installation in boardrooms, auditoriums, theaters, or anywhere versatile and cost-effective contro[...]

  • Page 71

    iLux Integrated Lig hting Control Syst em Commercial Lighting Design Guide Doc 4775A 67 iLux Features Wireless iLux Remote The CLS-IRHT8 is a compact IR wireless remote designed specifically for use with Crestron iLux Integrated Lighting Systems. The CLS-IRHT8 provides buttons for master up/down control, plus activation of scenes 1-4, ON, and OFF. [...]

  • Page 72

    Commercial Lighting Design Guide iLux Inte grated Light ing Control System Doc 4775A 68 Multi-Unit Expansion One CLS-C6 master will support up to eight additional CLS-C6 (or CLS-C6M) units, enabling systems of up to 54 lighting zones and 54 shade groups. Commands for typical functions like scene recall, scene off, master dimming, and occupancy stat[...]

  • Page 73

    iLux Integrated Lig hting Control Syst em Commercial Lighting Design Guide Doc 4775A 69 Control System Integration The CLS-C6 features two separate Cresnet® control networks, one for local devices and one for connection to a 2-Series control system. Connecting the CLS-C6 to a control system allows its functions to be controlled from touchpanels, k[...]

  • Page 74

    Commercial Lighting Design Guide iLux Inte grated Light ing Control System Doc 4775A 70 iLux Expansion Modules All expansion modules are compatible with Crestron CLX-Series, CLW-Series, iLux, and infiNET™ in-wall dimmers. Model Load Function CLS-EXP-DIM Supports incandescent, magnetic low voltage, neon/cold cathode, and 2-wire and 3-wire dimmable[...]

  • Page 75

    iLux Integrated Lig hting Control Syst em Commercial Lighting Design Guide Doc 4775A 71 Expansion Modules Wiring Diagrams NOTE: 230V feed is available on CLSI units only[...]

  • Page 76

    Residential Lighting Design Guide Wall Box Dimmers and Switches Doc 4775A 72 Wall Box Dimmers and Switches Although the following devices are functional as a standalone dimmer or switch, they deliver greatly enhanced functionality as part of a complete Crestron control solution. Designed to replace any standard in-wall dimmer or light switch, when [...]

  • Page 77

    Wall Box Dimm ers and Switches Comme rcial Lighting Design Guide Doc 4775A 73 Cresnet Wall Box Dimmers Model Load Features CLW-DIM Wall Box Dimmer (Stand-alone) Supports incandescent loads up to 1000 watts, or magnetic low voltage loads up to 1000VA/750 Watts Four possible dimming level presets. The slide switch selects between ADJUST, PRESE T, and[...]

  • Page 78

    Commercial Lighting Design Guide Wall Box Dimm ers and Switches Doc 4775A 74 Cresnet Wall Box Switches Model Load Features CLW-SW Wall Box Switch (Stand-alone) Supports incandescent and electronic low voltage loads up to 1000 watts, or magnetic low-voltage and neon/cold cathode loads up to 1000VA/750 watts. Fluorescent ballasts, high- intensity dis[...]

  • Page 79

    Commercial Lighting Design Guide infiNET Wireless Technology Doc. 4775A 75 infiNET™ Wireless Technology[...]

  • Page 80

    Commercial Lighting Design Guide infiNET Wireless Technology Doc. 4775A 76 infiNET Dimmers, Switches, and T hermostat Model Load Function CLW-DIM1RF infiNET Wall Box Dimmer 1000-watt wall mount dimmer The single large rocker button provides a ccess to three user presets. With each selection, the lighting levels fade natura lly between each preset l[...]

  • Page 81

    Crestron Residential Lighting Desig n Guide infiNET Wireless Technology Doc 4775A 77 Example infiNET system[...]

  • Page 82

    Commercial Lighting Design Guide Control Processors Doc. 4775A 78 Control Processors PAC2 Lighting Control Processor The PAC2 enables efficient control of lighting and other systems such as HVAC and security, and has been specifically designed for the Crestron automation enclosure and the Crestron lighting system (although other Crestron processors[...]

  • Page 83

    Crestron Commercia l Lighting Design Guide Control Processors Doc 4775A 79 The Fault connector provides a dry contact closure fault signal to notify an external control system when the PAC2 has a system fault. This output is connected to a digital input of the backup computer. A fault is defined as the CPU not interacting with Cresnet® for 10 seco[...]

  • Page 84

    Control Processors Crestron Commerci al Lighting Design G uide Doc. 4775A 80 PAC2M Professional Automati on Mini Control Syste m The PAC2M is a compact, low-cost alternative to the PAC2 designed for small lighting and automation applications. At half the size of a PAC2, the PAC2M is perfect for apartments and smaller homes as well as individual mee[...]

  • Page 85

    Crestron Commercia l Lighting Design Guide Control Processors Doc. 4775A 81 Override An override input is provided to allow an external contact closure to bypass the PAC2M and activate a preset override state in each connected lighting module. A signal is passed to the lighting modules via the fifth wire of the interconnect cable, and the lights ar[...]

  • Page 86

    Crestron Lighting Soft ware Basic lightin g System Interc onnections Doc. 4775A 82 Basic Lighting System Interconnections An example of a Cr estron Lighting System that includes th ermostat, shade control an d interfaces[...]

  • Page 87

    Commercial Lightin g Design Guide Occupancy an d Photocell Se nsors Doc. 4775A 83 Occupancy and Photocell Sensors GLS-ODT & GLS-OIR Green Light Occupa ncy Sensors Crestron Green Light™ sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. Crestro[...]

  • Page 88

    Commercial Lighting Design Guide Integr ated Shad e and Drape C ontrollers Doc. 4775A 84 Integrated Shade and Drape Controllers C2N-SDC The C2N-SDC is a 2-channel shade and drape controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lift[...]

  • Page 89

    Commercial Lighting Design Guide Integrated Partner Mo dules Doc. 4775A 85 Integrated Partner Modules Crestron Electronics, Inc. Integrated Partner Program allows partner manufacturers' products to operate seamlessly in a Crestron systems environment. Integrated Partner Modules offer the Crestron control systems programmer a simplified, timesa[...]

  • Page 90

    Commercial L i g h t i n g D e s i g n G u i d e A p p e n d i x A Doc. 4775A 86 Appendix A: RoomView ® Remote Asset Management Crestron RoomView ® is the first and only real time, multi-user remote asset management software that delivers complete facility-wide network control of lighting resources, HVAC and AV. RoomView works seamlessly with Cre[...]

  • Page 91

    Crestron Commercia l L i g h t i n g D e s i g n G u i d e Appendix A Doc 4775A 87 Manage and control every room from any PC. With RoomView Server Edition®, every room is connected, Features include:  Web-based cross platform and PC executable interfaces  Customizable and user-defined interface  Direct database integration with SQL Server[...]

  • Page 92

    Commercial Lighting Design Guide Appendix A Doc 4775A 88 Example RoomView Server Edition® reports:[...]

  • Page 93

    Crestron Commercia l L i g h t i n g D e s i g n G u i d e Appendix A Doc 4775A 89 RoomView Express RoomView ® Express extends the power and simplicity of RoomView to large professional and educational facilities, supporting hundreds of rooms and unlimited users. No other Pro help desk software can match the capability of RoomView Express to monit[...]

  • Page 94

    Commercial Lighting Design Guide Appendix B Doc 4775A 90 Appendix B Green Light Designer Software™ Crestron Green Light ™ Designer allows you to design and document a complete, energy-efficient commercial lighting solution that combines facility-wide lighting, shade/drape control with audio/video integration and network management — all witho[...]

  • Page 95

    Crestron Commercia l L i g h t i n g D e s i g n G u i d e Appendix B Doc 4775A 91[...]

  • Page 96

    Commercial L i g h t i n g D e s i g n G u i d e A p p e n d i x C Doc. 4775A 92 Appendix C: Touchpanel Comparison Charts Tilt Touchpanels Isys Tilt Touchpanels Isys G-Series Isys i/O Tilt Touchpanel Media Centers TPS-17B (TPS-17W) TPS-15B (TPS-15W) TPS-12B (TPS-12W) TPS-4000 TPS-3000 TPS-15G- QM TPS-12G- QM TPMC-17-QM TPMC-15-QM TPMC-17-CH TPMC-15[...]

  • Page 97

    Crestron Commercia l L i g h t i n g D e s i g n G u i d e Appendix C Doc 4775A 93 Wall Mount Touchpanels Isys Wall Mount Touchpanels Isys G Series Isys i/O Media Centers TPS-17L TPS-15L TPS-12L TPS- 4000L TPS-6L TPS-4L TPS-15G- QM-L TPS-12G- QM-L TPMC- 17-QM-L TPMC-15- QM-L TPMC-17- CH-L TPMC-15- CH-L Touchscreen Displa y Display Size 17" 15&[...]

  • Page 98

    Commercial Lighting Design Guide Appendix C Doc 4775A 94 Wireless Touchpanels & Handheld Remotes Isys Wireless Isys I/O WiFi MiniTouch Handheld Remotes TPS-6X TPMC-8X TPMC-8T TPMC-4X MT-1000C MLX-2 ML-600 WPR-48 CNRFHT Displa y Display Type TFT Acti ve M atrix Color Touchscreen TFT Acti ve M atrix Color Touchscreen TFT Acti ve M atrix Color Tou[...]

  • Page 99

    Commercial L i g h t i n g D e s i g n G u i d e A p p e n d i x D Doc. 4775A 95 Appendix D: General Lighting Design Considerations Crestron provides many options for illumination control. The following general lighting design information can help you formulate a complete, energy efficient lighting design plan. Light plays an essential role in our [...]

  • Page 100

    Commercial Lighting Design Guide Appe ndix D Doc 4775A 96 Ambient Lighting for Mood and Highlights Ambient light is the general, overall light that fills in shadows, reduces contrast, and lights vertical surfaces to give the space a brighter feel. Ambient light is what you need for casual activities in your rooms. Ambient lighting sets a dramatic o[...]

  • Page 101

    Commercial Lighting Design Guide Appendix D Doc 4775A 97 Grazing and Washing Surfaces On walls or on the surface of an object, changing the way light is focused produces different effects. To emphasize a rough textured brick wall, graze the surface with light striking the surface at a sharp angle. To emphasize a smooth wall, wash the surface with l[...]

  • Page 102

    Commercial L i g h t i n g D e s i g n G u i d e A p p e n d i x E Doc. 4775A 98 Appendix E: Glossary of Lighting Terminology A AMPERE: The standard unit of measur ement for electric c urrent that is equal to one coulomb per second. It defines the quantit y of electrons moving past a given point in a circuit during a specific period, abbreviated am[...]

  • Page 103

    Commercial Lighting Design Guid e Appendix E Doc 4775A 99 DOWNLIGHT: A type of ceiling luminaire, usually fully recessed, where most of the light is directed down wa rd. May feature an open reflecto r and/or shielding device E EFFICACY: A metric used to compare light output to energy consumption. Efficacy is measured in lumens per wa tt. Efficac y [...]

  • Page 104

    Commercial Lighting Design Guide Appendix E Doc 4775A 100 L LAMP CURRENT CREST FACTOR (LCCF): The peak lamp curre nt divided by the RMS (average) lamp current . Lamp manufacture rs require <1.7 for best lamp life. An LCCF of 1.414 is a perfect sine wave LAMP LUMEN DEPRECIATION FACTOR (L LDF): A factor that represents the reduction of lumen outpu[...]

  • Page 105

    Commercial Lighting Design Guid e Appendix E Doc 4775A 101 resultant light distribution pr oduced by this shape provides reduced glare, better light control, and is co nsidered to have greater aesthetic appeal PARACUBE: A metallic coated plastic lou ver made up of small squares. Often used to replace the lens in an installed troffer to enhance its [...]

  • Page 106

    Commercial Lighting Design Guide Appendix E Doc 4775A 102 TUNGSTEN HALOGEN LAMP: A gas-filled tungsten filament incandescent lamp with a lamp envelope made of quartz to withstand the high temperature. This lamp contains some halogens (namely iodine, chlorine, bromine, and fluorine), which slow the evaporation of the tungsten. Also, commonly called [...]

  • Page 107

    [...]

  • Page 108

    Crestron Electronics, Inc. Specifications subject 15 Volvo Drive to change wit hout notice Rockleigh, NJ 07647 Doc. 4775A www .crestron.com 04.09[...]