D-Link DVA-G3340S manuel d'utilisation

DVA-G3340S High-Speed 2.4 GHz Wireless ADSL VOIP Router Manual[...]

DVA-G3340S User M anual Page 2 of 94 V1.00 AU Contents Package Contents ............................................................................. 4 Introduction ........................................................................................ 5 Features .....................................................................................[...]

DVA-G3340S User M anual Page 3 of 94 V1.00 AU Advanced > DMZ ................................................................................................ 62 Advanced > Firewall ........................................................................................... 63 Advanced > RIP ..................................................[...]

DVA-G3340S User M anual Page 4 of 94 V1.00 AU Package Contents Contents of Package:  D-Link DVA-G3340S High-Speed 2.4GHz Wireless ADSL VoIP Router  Power Adapter - AC 12V, 1200mA  Manual and Warranty on CD  RJ-11 Cable  Ethernet Cable  USB Cable Note: Using a power supply wi th a different voltage rating than the one included with[...]

DVA-G3340S User M anual Page 5 of 94 V1.00 AU Introduction The D-Link DVA-G334 0S High-Speed Wirel ess Router is an 802.11g high-performance, wireless router that supports high-speed wi reless networking at home, at work or in public places. Unlike most routers, the DVA-G334 0S provides data transfers at up to 5X (compared to the standard 11 Mbps) [...]

DVA-G3340S User M anual Page 6 of 94 V1.00 AU ADSL port provides a connection to your ISP and the WAN (Internet). Line port provides a connection to your regular telephone line from the wall outlet. FXS1 and FXS2 ports provide connections to two analog (POTS) telephones. The four LAN ports allow wired connections to Ethernet enabled devices. USB po[...]

DVA-G3340S User M anual Page 7 of 94 V1.00 AU A DSL − This LED will light green when an ADSL connection is detected. It will blink when there is data activity on the connection. CA (Call Agent) − This LED will blink when you are connected to a VOIP SIP Server. VoIP − LED will light green when you are making a VoIP call. PSTN (Public Switched [...]

DVA-G3340S User M anual Page 8 of 94 V1.00 AU Features  Fully compatible with the 802.11g stan dard to provide a wireless data rate of up to 54Mbps  Backwards compatible with the 802.11 b standard to provide a wireless data rate of up to 11 Mbps  WPA (WiFi Protected Acce ss) authorizes and identifies users bas ed on a secret key that chang[...]

DVA-G3340S User M anual Page 9 of 94 V1.00 AU Using the Web Interface Whenever you want to configure your network or the DVA -G 33 40S , yo u c an access the Configuration Menu by opening the web-browser and typing i n the IP Add res s of the DVA-G3340S. The DVA-G3340S default IP Address is shown below:  Open your web browser  Type in the IP [...]

DVA-G3340S User M anual Page 10 of 94 V1.00 AU The two essential settings for wireless LAN operation are the SSID and Channel Number. The SSID (Service Set Identifi er) is used to identify a group of wireless LAN components. The SSID can be broadcast or can be hidden (not broadcast). Use the Advanced Wireless Settings menu to configure these basic [...]

DVA-G3340S User M anual Page 11 of 94 V1.00 AU 4. The Channel: may be changed to channel s that are available in your region. Channels available for wireless LAN communication are subject to regional and national regulati on. Click the Apply button to save any change to the Channel. 5. Make sure you save the new wireless settings. Use the Tools >[...]

DVA-G3340S User M anual Page 12 of 94 V1.00 AU The wire less L AN interf ace of the DVA-G3340S has various security features used to limit access to the device or to encrypt data and shared information. The available standardised security for wireless LAN includes WEP and WPA Wireless security is configured with the Wireless Settings menu locate d [...]

DVA-G3340S User M anual Page 13 of 94 V1.00 AU WEP can use open or shared keys, or may be configured to allow the clients to use either type of key. Use the Authentication Type: drop-down menu to choose Open , Shared or Both . • Select Open to allow any wireless station to associate with each other through the access point. Wireless devices wil l[...]

DVA-G3340S User M anual Page 14 of 94 V1.00 AU WPA security for wireless communication has been developed to overcome some of the shortcomings of WEP. WPA uses an improved encryption method combined with an authentication procedure. Wireless Settings − WPA Home > Wireless > WPA Wireless Security − WPA Configure WPA Settings To configure W[...]

DVA-G3340S User M anual Page 15 of 94 V1.00 AU WPA-PSK requires a shared key but does not use a separate server for authentication. PSK keys can be ASCII or Hex type. Wireless Settings − WPA-PSK Home > Wireless > WPA-PSK Wireless Security − WPA-PSK Configuring WPA-PSK Security for WLAN To use WPA with a PSK key: 1. Select the PSK Hex (Hex[...]

DVA-G3340S User M anual Page 16 of 94 V1.00 AU Configuring the WAN Connection Home > WAN > PPPoE/PPPoA WAN Settings Menu – PPPoE / PPPoA Select the connection type used for your account. The menu will display settings that are appropriate for the connection type you select. Follow the instruction bel ow according to the type of connection y[...]

DVA-G3340S User M anual Page 17 of 94 V1.00 AU PPPoE and PPPoA Connection for WAN Follow the instructions below to configure the Router to use a PPPoE or PPPoA for the Internet connection. Make sure you have all the necessary information before you configure the WAN connection. 1. If not already selected, choose the PPPoE/PPPoA option from the WAN [...]

DVA-G3340S User M anual Page 18 of 94 V1.00 AU you will not be able to use the features configured in the Firewall and Filters menus located in the Advanced tab. See the next chapter for more detail s on these menus. 10. Typically the global IP setti ngs (i.e. IP address for the WAN interface) for a PPPoA or PPPoA connection will use Dynamic IP ass[...]

DVA-G3340S User M anual Page 19 of 94 V1.00 AU MTU The Maximum Transmission Unit size may be changed if you want to optimize efficiency for uploading data through the WAN interface. The default setting (1400 bytes) should be suitable for most users. Some user may want to adjust the setting to optimize performa nce for wireless traffic or when low l[...]

DVA-G3340S User M anual Page 20 of 94 V1.00 AU the global IP address provided to you by your ISP. The IP Unnumbered option is used if you want to set up a non-TCP/IP port protocol link through the WAN interface. An IP Unnumbered interface does not have an IP address and therefore cannot be managed via Telnet or any othe r TCP/IP a pplicatio n. Stat[...]

DVA-G3340S User M anual Page 21 of 94 V1.00 AU Dynamic IP Address Connection for WAN Home > WAN > Dynamic IP Add ress WAN Settings for Dynamic IP Address Connection 1. Choose the Dynamic IP Address option from the WAN Settings pull-down menu. 2. Under the ATM VC Settings at the top of the menu should not be changed unless you have been instru[...]

DVA-G3340S User M anual Page 22 of 94 V1.00 AU adapter when you first access their network. This can prevent the Router (which has a different MAC address) from being allowed access to the ISPs network (and the Internet). To clone the MAC address of your computer’s Ethernet adapter, type in the MAC address in the Cloned MAC Address field and clic[...]

DVA-G3340S User M anual Page 23 of 94 V1.00 AU cloned MAC address with th e factory default setti ng, type in all zeros - 0:0:0:0:0:0 - and click the Cl one MAC Address button. MTU The Maximum Transmission Unit size may be changed if you want to optimize efficiency for uploading data through the WAN interface. The default setting (1400 bytes) shoul[...]

DVA-G3340S User M anual Page 24 of 94 V1.00 AU Bridged Connection for WAN Home > WAN > Bridge Mode WAN Settings Menu – Bridge Mode To configure a Dynamic IP Address connecti on, perform the steps listed below. Some of the settings do not need to be changed th e first time the device is set up, but can be changed later if you choose. See the[...]

DVA-G3340S User M anual Page 25 of 94 V1.00 AU method used for your ADSL service. The availabl e options are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux. If have not be en provided specific information for the Connection Type setting, leave the default setting. 4. Most users will not need to change ATM settings. If this is the fi rst time you ar[...]

DVA-G3340S User M anual Page 26 of 94 V1.00 AU When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually assign a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will also need to configure DNS server IP settings in the DNS Settings configuration menu (s[...]

DVA-G3340S User M anual Page 27 of 94 V1.00 AU IP Address This is the permanent global IP address for your account . This is t he addres s that is v isible o utside your private network. Get this from your ISP. Subnet Mask This is the Subnet mask for the WAN interface. Get this from your ISP. Gateway Address This is the IP address of your ISP’s G[...]

DVA-G3340S User M anual Page 28 of 94 V1.00 AU Firewall Use this to universally enabl e or disable the Firewall and Filter features available in the Router. If you disable this you will not be able to configure settings in the Firewall or Filters menus in the Advanced directory.[...]

DVA-G3340S User M anual Page 29 of 94 V1.00 AU The ATM settings in the WAN configuration menus for the different connection types can be used to adjust QoS parameters for ADSL clients. This may not be available to all ADSL accounts. Ask your ISP if ATM Traffic Shaping is available for your account. ATM Traffic Shaping Home > WAN > ATM ATM Set[...]

DVA-G3340S User M anual Page 30 of 94 V1.00 AU desirable to specify the PCR. CBR – Constant Bit Rate, usually used in circumstances where very low packet loss and very low Cel l Delay Variab le (CDV) are desirable. VBR – Variable Bit Rate, usually used when network traffic is characterized by bursts of packets at variable intervals, and some mo[...]

DVA-G3340S User M anual Page 31 of 94 V1.00 AU The ATM settings in the WAN configuration menus for the different connection types can be used to adjust QoS parameters for ADSL clients. This may not be available to all ADSL accounts. Ask your ISP if ATM Tra ffic Shaping is available for your account. ATM VC Settings Home > WAN > ATM VC Setting[...]

DVA-G3340S User M anual Page 32 of 94 V1.00 AU disabled. WAN Setting Use this to change the type of connection used. The options are: PPPoE/PPPoA , Dynamic IP Addr ess , Static IP Address and Bridge Mode . Each option will offer different setting s for configuration.[...]

DVA-G3340S User M anual Page 33 of 94 V1.00 AU Additional PVCs can be configured by first accessing the WAN configuration menu in the Home directory. Multiple Virtual Connections Home > WAN > Multiple PVC Settings The Router supports multiple virtual connections. Up to eight PVCs to ei ght separate destinations can be created and oper ated si[...]

DVA-G3340S User M anual Page 34 of 94 V1.00 AU You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHC[...]

DVA-G3340S User M anual Page 35 of 94 V1.00 AU DHCP Settings Home > DHCP Configure DHCP server settings for the LAN The two options for DHCP service are as follows:  You may use the Router as a DHCP server for your LAN.  You can disable DHCP service and manually configure IP settings for your workstations. You may also configure DNS settin[...]

DVA-G3340S User M anual Page 36 of 94 V1.00 AU Router must be restarted for the settings to go into effect. To save the new settings and restart the Router, click on the Tools directory tab and then cli ck the System menu button. Click the Save & Reboot button under Save Settings and Reboot the System . The Router will save the new DHCP setting[...]

DVA-G3340S User M anual Page 37 of 94 V1.00 AU To disable DHCP, click to select the No DHCP option and click on the Apply button. Choosing this option requires that workstations on the local network must be configured manually or use another DHCP server to obtain IP settings. If you configure IP settings manually, make sure to use IP addresses in t[...]

DVA-G3340S User M anual Page 38 of 94 V1.00 AU The Router can be configured to relay DNS settings from your ISP or another available service to workstations on your LAN. When using DNS relay, the Router will accept DNS requests from hosts on the LAN and forward them to the ISP’s, or alternative DNS servers. DNS relay can use auto discovery or the[...]

DVA-G3340S User M anual Page 39 of 94 V1.00 AU The Router supports DDNS, a service that maps Internet domain names to IP addresses. DDNS serves a similar purpose to DNS in that DDNS al lows anyone hosting a Web or FTP server to advertise a public name to prospective users. Unlike DNS that only wor ks with static IP addresses, DDNS works with dynami[...]

DVA-G3340S User M anual Page 40 of 94 V1.00 AU The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − V O I P ) . VOIP Settings − Server Settings Home > Voice > Server Configure VOIP Server Settings The table below describes the V OIP Server settings. VOIP Server Parameters Description Server Addr[...]

DVA-G3340S User M anual Page 41 of 94 V1.00 AU VoIP service provider did not give you a server port number for SIP. Service Domain Enter the SI P service d omain name in this fie ld. URL Scheme Select SIP-URL to have the router include the domain name with the SIP number in the SIP messages that it sends. Sel ect TEL-URL to have the router use the [...]

DVA-G3340S User M anual Page 42 of 94 V1.00 AU The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − V O I P ) . VOIP Settings − User Agent Home > Voice > User Agent Configure VO IP User Agen t Settings The table below describes the VOIP User Agent settings. VOIP User Agent Parameters Description[...]

DVA-G3340S User M anual Page 43 of 94 V1.00 AU Display Name The name that will be displayed when the User Agent is in use. User Agent Port This selects the port number the router will listen to when determining when calls are bei ng made. Authentication Username The Username used to access your SIP server and your VoIP s ervice pro vider. Authentic[...]

DVA-G3340S User M anual Page 44 of 94 V1.00 AU The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). VOIP Settings − Peer to Peer Home > Voice > Peer to Peer C o n f i g u r e V O I P P e e r t o P e e r S e t t i n g s The table below describes the V OIP Peer to Peer settings. VOIP Peer t[...]

DVA-G3340S User M anual Page 45 of 94 V1.00 AU one in the first field. The second field is for the IP address of the Phone. Port This selects the port number the router will contact when this ca ll is bein g made.[...]

DVA-G3340S User M anual Page 46 of 94 V1.00 AU The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). VOIP Settings − Telephony Home > Voice > Teleph ony C o n f i g u r e V O I P T e l e p h o n y S e t t i n g s[...]

DVA-G3340S User M anual Page 47 of 94 V1.00 AU The table below describes the V OIP Telephony settings. VOIP Telephony Parameters Description Index Index allows you to select the current port you want to configure. This directly relates to the FXS1 or FXS2 ports on the back of the unit. EC Echo Cancellation (EC) – G.168 is an ITU standard for elim[...]

DVA-G3340S User M anual Page 48 of 94 V1.00 AU Caller ID Set a numerical Caller ID of up 32 digits. 5 caller IDs can be created and will be li sted below the Distinct ive Ringin g area. To edit or de lete an e ntry that has already been created, find the entry in the list and click on the appropriate icon.[...]

DVA-G3340S User M anual Page 49 of 94 V1.00 AU The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − V O I P ) . VOIP Settings − ACR Home > Voice > ACR Configure VOIP ACR Settings The table below describes the V OIP Telephony settings. VOIP ACR Parameters Description Index Index shows you what th[...]

DVA-G3340S User M anual Page 50 of 94 V1.00 AU UPnP supports zero-configuration networking and automatic discovery for many types of networked devices. When enabled , it allows other devices that support UPnP to dynamically join a network, obtain an IP address, convey its capab ilities , and le arn abo ut the presence and capab ilities o f other d [...]

DVA-G3340S User M anual Page 51 of 94 V1.00 AU Use the Virtual Server menu to set up port forwarding rules in the Router. The Virtual Server function allows remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DVA-G3340S will accept remote requests for these services at your Global IP Address, [...]

DVA-G3340S User M anual Page 52 of 94 V1.00 AU services to an appropriate server on the users’ LAN. To choose a particular service click a radio button from the category list and highlight the service from the Avail able Rules list. Click Add, and then click A pply to save the rule. Ensure you Save & Reboot to make this rule effective. You ma[...]

DVA-G3340S User M anual Page 53 of 94 V1.00 AU This menu can be accessed directly by clicking on the SNMP button or hyperlink in the Advanced setup menu. Simple Network Management Protocol (SNMP) is an OSI Layer 7 Application desi gned specifical ly for managing and monitoring network devices. SNMP enables network management stations to read and mo[...]

DVA-G3340S User M anual Page 54 of 94 V1.00 AU This menu can be accessed directly by clicking on the TR069 button or hyperlink in the Advanced setup menu. This featu re is curre ntly only supported by certain Internet Service Providers and will not require any changes unless instructed. TR-069 Advanced > TR069 TR069 Configuration Menu[...]

DVA-G3340S User M anual Page 55 of 94 V1.00 AU Filter rules in the Router are put in place to allow or block specifie d traffic. The Filte r Rules however can be used in a single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) routed data. The rules based on IP address and TCP/UD P port. Configu[...]

DVA-G3340S User M anual Page 56 of 94 V1.00 AU The parameters described below are used to set up filter rules. Parameter Description Source IP For an Ou tbound F ilter, thi s is the IP address or IP addresses on your LAN for which you are creating the filter rul e. For an Inbound Filter, this is the IP address or IP addresses for which you are crea[...]

DVA-G3340S User M anual Page 57 of 94 V1.00 AU Bridge filters are used to block or allow various types of packets through the WAN interface. T his may be done for security or to improve network efficiency. The rules are configured for individual devices based on MAC address. Filter rules can be set up for source, destin ation or b oth. You can set [...]

DVA-G3340S User M anual Page 58 of 94 V1.00 AU button. T he rule wi ll appea r in the ent ry field be low as it is currently c onfigur ed. To edit an e xisting rule, sele ct the rule by c licking t he corre sponding Edit radio button. Make the desired changes and cl ick the Add button. To remove a bridge fil ter from the table in the bottom half of[...]

DVA-G3340S User M anual Page 59 of 94 V1.00 AU The LAN Clients menu is used when establishing Port Forwarding, Access Control and Advanced Security rules for IP addresses on the LAN. This menu can be accessed directly by clicking on the LAN Clients button o r hyperlink in the Advanced setup menu. You can also click on the New IP button located in t[...]

DVA-G3340S User M anual Page 60 of 94 V1.00 AU Use Static Routing t o specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway. Routing Advanced > Routing Routing Menu To add a static rout e to a s p[...]

DVA-G3340S User M anual Page 61 of 94 V1.00 AU radio button and choose a connection from the pull -down menu, then enter a Destination IP address and Netmask . Click Apply to enter the new static route in the table below. The route becomes a ctive immediately upon creation To remove a static route from the table in the bottom hal f of the window, c[...]

DVA-G3340S User M anual Page 62 of 94 V1.00 AU Since some applica tions are not compatible with NAT, the Router supports use of a DMZ IP address for a single host on the LAN. This IP address is not protected by NAT and will therefore be visible to agents on the Internet with the right type of software. Keep in mind that any client PC in the DMZ wil[...]

DVA-G3340S User M anual Page 63 of 94 V1.00 AU Firewall Advanced > Firewall Firewall Configuration Menu When DoS, P ort Scan, or Service Fi ltering P rotection is enabled , it wil l create a firewall policy to protect your network against the following: Dos Protection Port Scan Protection Service Filtering SYN Flood check ICMP Redirection check [...]

DVA-G3340S User M anual Page 64 of 94 V1.00 AU Null Scan attack SYN/RST attack SYN/FIN Scan IKE from WAN RIP from WAN DHCP from WAN A DoS "denia l-of-ser vice" attac k is charact erized by an explicit at tempt b y attackers to prevent legitimate users of a service fr om using th at service . Examples include: attempts to "flood"[...]

DVA-G3340S User M anual Page 65 of 94 V1.00 AU The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN. Routing Information Protocol (RIP) Advanced > RIP Dynamic Routing (RIP) menu To enab le RIP, sele ct Enabled from the RIP pull-down menu, select the Protocol ( R[...]

DVA-G3340S User M anual Page 66 of 94 V1.00 AU When the WAN connection is configured for either PPPoA or PPPoE, you can configure the Router’s PPP session to remain on all the time, or to disconnect after some period of no activity. You may also choose to instruct the Router to connect each time you want to access the WAN or the Internet. PPP Con[...]

DVA-G3340S User M anual Page 67 of 94 V1.00 AU The ADSL Config uration page allows the user to set the configuration for ADSL protocols. For most ADSL accounts the default settings Multi-mode will work. This con figurat ion works with all ADSL implementations. If you have been given instructions to change the Modulation method used, select the desi[...]

DVA-G3340S User M anual Page 68 of 94 V1.00 AU The ATM Virtual Circu it connection menu is used to configure the WAN connection. If you are using mult iple PVCs , you can change the configuration of any PVC in this men u. To crea te new or additional PVCs, read t he section below on Multip le PVCs. This menu can be used as an alternative menu to co[...]

DVA-G3340S User M anual Page 69 of 94 V1.00 AU QoS is an implementation of the IEEE 802.1p standard that allows network administrators a method of reserving bandwidth for important functions that require a large bandwidth or have a high priority, such as VoIP (Voice-over Internet Protocol), web browsing applica tions, file server applica tions or v[...]

DVA-G3340S User M anual Page 70 of 94 V1.00 AU The Wireless Management menu locate d in the Advanced directory is used to control MAC address access to the wireless access point and to view a list of MAC addresses that are currently associated with the access point. This menu is also be used to enable and configure use of multiple SSIDs. To us e mo[...]

DVA-G3340S User M anual Page 71 of 94 V1.00 AU 1. Click in the Enable Access List option box to select it. 2. Select the action to perform on the MAC address to be speci fied. Choose to Allow or Ban association. 3. Type in the MAC Address in the entry field provided. 4. Click the Add button to add the MAC address to the li st. The AMC address will [...]

DVA-G3340S User M anual Page 72 of 94 V1.00 AU Wireless Performance Advanced > Wireless Performance If you want to tweak wireless settings, click the Wireless Performance menu button in the Advanced directory Wireless LAN Performan ce settings[...]

DVA-G3340S User M anual Page 73 of 94 V1.00 AU Tools The Tools tab allows you to set up basic maintenance features on the ADSL router. The windows available under thi s tab include Admin, Time, Remote Log, System, Firmware, Miscellaneous, and Test. Administrator Settings Tools > Admin Click the Tools tab to reveal the menu buttons for various fu[...]

DVA-G3340S User M anual Page 74 of 94 V1.00 AU Change System Password To change the password used to access the Router web manager, click the Admin button in the Tools directory to display the Administrator Settings menu. Under the Administrator heading, type the New Password and Confirm Password to be certain you have typed it correctly. Click the[...]

DVA-G3340S User M anual Page 75 of 94 V1.00 AU Time (SNTP) Tools > Time The Router provides a number of options to maintain current date and time i ncluding SNTP. Time & Date Configuration To configure system time on the Router, select the method used to maintain time. The options available include SNTP, using your computer’s syste m clock[...]

DVA-G3340S User M anual Page 76 of 94 V1.00 AU Remote Log Tools > Remot elog The router provides the ability to send the data from the l og to a remote server using a Syslog Service. This can be configured to be basic log data to more sophi sticated debug information from the uni t for troubleshooting. Remotelog Configuration You can even config[...]

DVA-G3340S User M anual Page 77 of 94 V1.00 AU System Settings Tools > System Save o r Load Config uration File Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to your computer. To save the current configuration settings to your computer, click the Admin button in the Tools directory [...]

DVA-G3340S User M anual Page 78 of 94 V1.00 AU Save Settings and Reboot the Syst em Pressing the Save & Reboot button will save all current settings to the devi ces memory. The unit will then restart with all of these saved settings. Restore Factory Defa ult Setting s To reset the Router to its factory defaul t settings, click the Restore butto[...]

DVA-G3340S User M anual Page 79 of 94 V1.00 AU Firmware Upgrade Tools > Firmwa re Use the Firmware Upgrade menu to load the latest firmware for the device. Note that the device configuration settings may return to the factory default settings, so make sure you save the configuration settings with the System Settings menu described above. Firmwar[...]

DVA-G3340S User M anual Page 80 of 94 V1.00 AU Ping Test Tools > Miscellaneous To perform a standard Ping test for network connecti vity, click the Misc. menu button in the Tools directory to view the Miscellaneous Configuration menu. Miscellaneous Configuration menu Ping Test The Ping test functions on the WAN and LAN interfaces. Type the IP ad[...]

DVA-G3340S User M anual Page 81 of 94 V1.00 AU use IGMP to perform remote configuration fo r client devices, such as the Router. If you are unsure, check with your ISP. To enable IGMP service to the LAN i nterface, select Enabled and click the A pply button.[...]

DVA-G3340S User M anual Page 82 of 94 V1.00 AU Test Tools > Test The Test menus are used to test connectivity of the Router. This diagnostics feature executes a series of test of your system software and hardware connections. Use this Diagnostic Test when working with your ISP to troubleshoot probl ems. Diagnostic Test Menu[...]

DVA-G3340S User M anual Page 83 of 94 V1.00 AU Status Information Use the various read-only menus to view system information and monitor performance. Device Information Display Status > Device I n f o Use the Device Information window to quickly view basic current information about the LAN a nd WAN inter faces and device inform ation in cluding [...]

DVA-G3340S User M anual Page 84 of 94 V1.00 AU DHCP Clients Info Status > DHCP Clients To view DHCP clients that are configured on the Ro uter click DHCP Clients under the Status tab. DHCP Client Inf o list[...]

DVA-G3340S User M anual Page 85 of 94 V1.00 AU Log Status > Log The system log displays chronolo gical event log data. Use the navigation buttons to view or scroll log pages. You may also save a simple text file containing the log to your computer. Click the Save Log button and follow the prompts to save the file. Log display Click Clear Log de [...]

DVA-G3340S User M anual Page 86 of 94 V1.00 AU Traffic Statistics Status > Statistics Use the Traffic Statistics window to monitor traffic on the Ethernet or ADSL Internet connect ion. When t he Wireless Select the in terface for which you wa nt to view packet statistics and the information will appear below. Traffic Statistics information Click[...]

DVA-G3340S User M anual Page 87 of 94 V1.00 AU ADSL Status > ADSL Use the ADSL Status informati on and the Test page for troubleshooting the ADS L connection. ADSL Status in form at ion[...]

DVA-G3340S User M anual Page 88 of 94 V1.00 AU Technical Specifications Key Component Description Network Processor and ADSL Chipset TI AR7VWi Voice Chipset TI TNETV901 Product Feature Description Network Interface One ADSL port RJ-11, inner pair (pin 2,3) ADSL Standards: ANSI T1.413 Issue 2 ITU G.992.1 (G.dmt) AnnexA ITU G.992.2 (G.lite) Annex A I[...]

DVA-G3340S User M anual Page 89 of 94 V1.00 AU DTMF Telephone dialing mode support Dial Pulse (20pps/10pps) Ringer Equivalency Nu mber REN=5 Line Impedance 600ohm Wireless Access Point Embedded IEEE 802.11 IEEE 802.11b Standard Compliance IEEE 802.11g IEEE 802.11b: DQPSK, DBPS K, DSSS, and CCK Radio and Modulation Type IEEE 802.11g: BPSK, QPSK, 16Q[...]

DVA-G3340S User M anual Page 90 of 94 V1.00 AU Classical IP over ATM (RFC1577) TCP/UDP ARP IPv4 ICMP RIP v1 (RFC 1058), RIP v2 (RFC 1389) IP Routing IP Static Routing DHCP Server (RFC2131) DHCP DHCP Client (RFC2131) DNS Cache DNS Dynamic DNS IGMP Proxy IP multicast IGMP Snooping ATM/ADSL Multiple PVC Support 8 PVCs ATM Cell format ITU-T Rec. I.361 [...]

DVA-G3340S User M anual Page 91 of 94 V1.00 AU Port Number Setting:- Possibl e to assign the range- Possi ble to set TCP/UDP/Both as the protocol Pass Through IPSec/L2TP/PPTP pass throug h MSN MSGR FTP SIP (Video/ Audio/ White Board/ Remote Control) ICQ for File and Audio transfer NetMeeting 3/ 2.0 Video/Audio receive NAT ALGs CUSEEME Security Over[...]

DVA-G3340S User M anual Page 92 of 94 V1.00 AU DTMF Relay RFC2833 Country Tone Support DT , RBT , BT ， Howler ／ HST(future support) DTMF Tone Detection Modem/Fax: V.21,V.25 Automatic fall back to PSTN in case of power failure PSTN line automatic selection (e.g. emergency Call 911) PSTN Life-line Functi on PSTN routing table support base on pref[...]

DVA-G3340S User M anual Page 93 of 94 V1.00 AU Operating Temperature 0 °C to 40 °C Storage Temperature -20 °C to 70 °C Operating Humidity Range 5% to 95% Non-co ndensing Product Feature Description IP Address/Mask 10.1.1.1/255.0.0.0 VPI/VCI 8/35 ADSL Mode Multi-mode Connection Mode PPPoE LLC Web Interface User Name/Password admin/admin[...]

DVA-G3340S User M anual Page 94 of 94 V1.00 AU Technical Support You can find software updates and user documentation on the D-Link website. D-Link Australia 1 Giffnock Avenue, North Ryde, NSW 2113 Sydney, Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 Australia: 1300-766-868 New Zealand: 0800-900-900 URL: www.dlink.com.au www.dlink.co.nz E-MAIL[...]