Aller à la page of
Les manuels d’utilisation similaires
-
Life Jacket
Dell R210
72 pages 1.08 mb -
Life Jacket
Dell 7.4
232 pages 4.7 mb -
Life Jacket
Dell C6100
160 pages 24.11 mb -
Life Jacket
Dell Version 7.3
75 pages 2.47 mb -
Life Jacket
Dell M910
46 pages 1.06 mb -
Life Jacket
Dell E02B
113 pages 5.59 mb -
Life Jacket
Dell R730xd
208 pages 13.17 mb -
Life Jacket
Dell version 3.0
37 pages 0.99 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Dell 7.4. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Dell 7.4 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Dell 7.4 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Dell 7.4 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Dell 7.4
- nom du fabricant et année de fabrication Dell 7.4
- instructions d'utilisation, de réglage et d’entretien de l'équipement Dell 7.4
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Dell 7.4 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Dell 7.4 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Dell en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Dell 7.4, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Dell 7.4, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Dell 7.4. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Server Administrator Version 7.4 Messages Reference Guide[...]
-
Page 2
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 201[...]
-
Page 3
Contents 1 Introduction .............................................................................................................. 17 What’s New in this Release .................................................................................................................. 17 Alert Message Change History ....................................[...]
-
Page 4
Event ID — 1053 ............................................................................................................................. 31 Event ID — 1054 ............................................................................................................................ 32 Event ID — 1055 .......................................[...]
-
Page 5
Event ID — 1400 ............................................................................................................................ 44 Event ID — 1401 ............................................................................................................................ 44 Event ID — 1402 ........................................[...]
-
Page 6
Event ID — 2005 ............................................................................................................................ 54 3 Storage Management Message Reference ....................................................... 55 Alert Monitoring and Logging .............................................................................[...]
-
Page 7
Event ID — 2092 ............................................................................................................................ 71 Event ID — 2094 ............................................................................................................................ 71 Event ID — 2095 ........................................[...]
-
Page 8
Event ID — 2141 ............................................................................................................................. 87 Event ID — 2142 ............................................................................................................................ 88 Event ID — 2143 .......................................[...]
-
Page 9
Event ID — 2183 .......................................................................................................................... 102 Event ID — 2184 .......................................................................................................................... 102 Event ID — 2185 ..........................................[...]
-
Page 10
Event ID — 2227 ........................................................................................................................... 117 Event ID — 2228 ........................................................................................................................... 117 Event ID — 2229 ........................................[...]
-
Page 11
Event ID — 2270 ........................................................................................................................... 131 Event ID — 2271 ........................................................................................................................... 131 Event ID — 2272 ........................................[...]
-
Page 12
Event ID — 2314 .......................................................................................................................... 146 Event Id — 2315 ........................................................................................................................... 146 Event ID — 2316 .........................................[...]
-
Page 13
Event ID — 2358 .......................................................................................................................... 162 Event ID — 2359 .......................................................................................................................... 162 Event ID — 2360 ..........................................[...]
-
Page 14
Event ID — 2403 .......................................................................................................................... 176 Event ID — 2404 .......................................................................................................................... 176 Event ID — 2405 ..........................................[...]
-
Page 15
Event ID — 2902 ..........................................................................................................................190 Event ID — 2903 .......................................................................................................................... 191 Event ID — 2904 ...........................................[...]
-
Page 16
Operating System Generated System Events .................................................................................. 226 Cable Interconnect Events ............................................................................................................... 226 Battery Events .................................................................[...]
-
Page 17
1 Introduction Dell OpenManage Server Administrator generates event messages stored primarily in the operating system or Server Administrator event logs and sometimes in Simple Network Management Protocol (SNMP) traps. This document describes the event messages that are created by Server Administrator version 7.1.2 and displayed in the Server Admin[...]
-
Page 18
2909, 2910, 2911, 2912, 2913, 2914, 2915, 2916, 2917, 2918, 2919, 2920, 2921, 2922, 2923, 2924, 2930, 2931, 2932, 2933 Deleted Alerts None Modified Alerts None Storage Management 4.2 Product Versions to which changes apply Storage Management 4.2.0 Server Administrator 7.2.0 New Alerts 2433, 2434, 2435, 2436, 2437, 2438 Deleted Alerts None Modified [...]
-
Page 19
Modified Alerts None Storage Management 3.3 Product Versions to which changes apply Storage Management 3.3.0 Server Administrator 6.3.0 New Alerts 2394, 2395, 2396, 2397, 2398, 2399, 2400, 2401, 2402, 2403, 2404 Deleted Alerts None Modified Alerts Alert severity changed for 1151 and 1351 Storage Management 3.2 Product Versions to which changes appl[...]
-
Page 20
Icon Alert Severity Component Status temperature probe in an enclosure) has crossed a warning threshold. Critical / Failure / Error A significant event that indicates actual or imminent loss of data or loss of function. For example, crossing a failure threshold or a hardware failure such as an array disk. Server Administrator generates events based[...]
-
Page 21
Data: Bytes in Hex Viewing Alerts and Event Messages An event log is used to record information about important events. Server Administrator generates alerts that are added to the operating system event log and to the Server Administrator alert log. To view these alerts in Server Administrator: 1. Select the System object in the tree view. 2. Selec[...]
-
Page 22
Viewing Events in Microsoft Windows Server 2008 1. Click the Start button, point to Settings , and click Control Panel. 2. Double-click Administrative Tools , and then double-click Event Viewer . 3. In the Event Viewer window, click the Tree tab and then click System Log. The System Log window displays a list of recently logged events. 4. To view t[...]
-
Page 23
• Time — The local time the event occurred. • Type — A classification of the event severity: Information, Warning, or Error. • User — The name of the user on whose behalf the event occurred. • Computer — The name of the system where the event occurred. • Source — The software that logged the event. • Category — The classific[...]
-
Page 24
Explanation Specifies the type of configuration error that occurred, for example: Configuration error type: Revision mismatch Description Line Item Current sensor value (in Amps): <Reading> Explanation Specifies the current sensor value in amps, for example: Current sensor value (in Amps): 7.853 Description Line Item Date and time of action: [...]
-
Page 25
Explanation Specifies the name of the memory bank in the system that generated the message, for example: Memory device bank location: Bank_1 Description Line Item Memory device location: <Device name in chassis> Explanation Specifies the location of the memory module in the chassis, for example: Memory device location: DIMM_A Description Line[...]
-
Page 26
Description Line Item Redundancy unit: <Redundancy location in chassis> Explanation Specifies the location of the redundant power supply or cooling unit in the chassis, for example: Redundancy unit: Fan Enclosure Description Line Item SD card device type: <Type of SD card device> Explanation Specifies the type of SD card device, for exa[...]
-
Page 27
2 Server Management Messages The following tables lists in numerical order each event ID and its corresponding description, along with its severity and cause. NOTE: For corrective actions, see the appropriate documentation. Server Administrator General Messages The messages below indicate that certain alert systems are up and working. Event ID — [...]
-
Page 28
Event ID — 1002 Description A system BIOS update has been scheduled for the next reboot Severity Information Cause The user has chosen to update the flash basic input/output system (BIOS). Event ID – 1003 Description A previously scheduled system BIOS update has been canceled Severity Information Cause The user decides to cancel the flash BIOS [...]
-
Page 29
Event ID — 1007 Description User initiated host system control action Action requested was: <Action> Severity Information Cause User requested a host system control action to reboot, power off, or power cycle the system. Alternatively, the user had indicated protective measures to be initiated in the event of a thermal shutdown. Event ID ?[...]
-
Page 30
Event ID — 1013 Description System Peak Power detected new peak value Peak value (in Watts): <Reading> Severity Information Cause The system peak power sensor detected a new peak value in power consumption. The new peak value in Watts is provided. Event ID — 1014 Description System software event: <Description> Date and time of acti[...]
-
Page 31
Temperature sensor value (in degrees Celsius): <Reading> If sensor type is discrete: Discrete temperature state: <State> Severity Error Cause A temperature sensor on the backplane board, system board, or the carrier in the specified system failed. The sensor location, chassis location, previous state, and temperature sensor value are pr[...]
-
Page 32
Previous state was: <State> If sensor type is not discrete: Temperature sensor value (in degrees Celsius): <Reading> If sensor type is discrete: Discrete temperature state: <State> Severity Warning Cause A temperature sensor on the backplane board, system board, CPU, or drive carrier in the specified system exceeded its warning th[...]
-
Page 33
Cooling Device Messages The cooling device sensors listed monitor how well a fan is functioning. Cooling device messages provide status and warning information for fans in a particular chassis. Event ID — 1100 Description Fan sensor has failed Sensor location: <Location in chassis> Chassis location: <Name of chassis> Previous state wa[...]
-
Page 34
Chassis location: <Name of chassis> Previous state was: <State> Fan sensor value: <Reading> Severity Warning Cause A fan sensor reading in the specified system exceeded a warning threshold. The sensor location, chassis location, previous state, and fan sensor value information is provided. Event ID — 1104 Description Fan sensor [...]
-
Page 35
Voltage sensor value (in Volts): <Reading> If sensor type is discrete: Discrete voltage state: <State> Severity Error Cause A voltage sensor in the specified system failed. The sensor location, chassis location, previous state, and voltage sensor value information is provided. Event ID — 1151 Description Voltage sensor value unknown S[...]
-
Page 36
Previous state was: <State> If sensor type is not discrete: Voltage sensor value (in Volts): <Reading> If sensor type is discrete: Discrete voltage state: <State> Severity Warning Cause A voltage sensor in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and voltage sensor[...]
-
Page 37
Current Sensor Messages The current sensors listed measure the amount of current (in amperes) that is traversing critical components. Current sensor messages provide status and warning information for current sensors in a particular chassis. Event ID – 1200 Description Current sensor has failed Sensor location: <Location in chassis> Chassis[...]
-
Page 38
Previous state was: <State> If sensor type is not discrete: Current sensor value (in Amps): <Reading> OR Current sensor value (in Watts): <Reading> If sensor type is discrete: Discrete voltage state: <State> Severity Information Cause A current sensor in the specified system returned to a valid range after crossing a failure[...]
-
Page 39
Cause A current sensor in the specified system exceeded its failure threshold. The sensor location, chassis location, previous state, and current sensor value are provided. Event ID — 1205 Description Current sensor detected a non-recoverable value Sensor location: <Location in chassis> Chassis location: <Name of chassis> Previous sta[...]
-
Page 40
Chassis intrusion state: <Intrusion state> Severity Information Cause A chassis intrusion sensor in the specified system detected that a cover was opened while the system was operating but has since been replaced. The sensor location, chassis location, previous state, and chassis intrusion state information is provided. Event ID — 1254 Desc[...]
-
Page 41
Event ID — 1301 Description Redundancy sensor value unknown Redundancy unit: <Redundancy Location in chassis> Chassis location: <Name of chassis> Previous redundancy state was: <State> Severity Warning Cause A redundancy sensor in the specified system could not obtain a reading. The redundancy unit location, chassis location, pr[...]
-
Page 42
redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy information is provided. Event ID — 1305 Description Redundancy degraded Redundancy unit: <Redundancy Location in chassis> Chassis location: <Name of chassis> Previous redundancy state was: <State> Severi[...]
-
Page 43
Cause A power supply sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided. Event ID — 1352 Description Power supply returned to normal Sensor Location: <Location in chassis> Ch[...]
-
Page 44
If in configuration error state: Configuration error type:<type of configuration error> Severity Error Cause A power supply has been disconnected or has failed. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided. Memory Device Messages[...]
-
Page 45
Cause Memory device status is normal. The memory device identified in the message has returned to a normal state. Event ID — 1403 Description Memory device status is <status> Memory device location: <location in chassis> Possible memory module event cause: <list of causes> Severity Warning Cause A memory device correction rate e[...]
-
Page 46
Event ID — 1550 Description Log monitoring has been disabled Log type: <Log type> Severity Warning Cause A hardware log sensor in the specified system is disabled. The log type information is provided. Event ID — 1551 Description Log status is unknown Log type: <Log type> Severity Information Cause A hardware log sensor in the speci[...]
-
Page 47
Event ID — 1555 Description Log sensor has failed Log type: <Log type> Severity Error Cause A hardware log sensor in the specified system failed. The hardware log status cannot be monitored. The log type information is provided. Processor Sensor Messages The processor sensors monitor how well a processor is functioning. Processor messages l[...]
-
Page 48
Previous state was: <State> Processor sensor status: <status> Severity Warning Cause A processor sensor in the specified system is in a throttled state. The sensor location, chassis location, previous state and processor sensor status information is provided. Event ID — 1604 Description Processor sensor detected a failure value Sensor[...]
-
Page 49
Cause A device was added in the specified system. The device location, chassis location, and additional event details, if available, are provided. Event ID — 1652 Description Device removed from system Device location: <Location in chassis> Chassis Location: <Name of chassis> Additional details: <Additional details for the events&g[...]
-
Page 50
Chassis Location: <Name of chassis> Previous state was: <State> Battery sensor status: <status> Severity Warning Cause A battery sensor in the specified system could not retrieve a reading. The sensor location, chassis location, previous state, and battery sensor status information is provided. Event ID — 1702 Description Batter[...]
-
Page 51
Cause A battery sensor in the specified system detected that a battery has failed. The sensor location, chassis location, previous state, and battery sensor status information is provided. Event ID — 1705 Description Battery sensor detected a non-recoverable value Sensor location: <Location in chassis> Chassis Location: <Name of chassis&[...]
-
Page 52
Severity Information Cause An SD card device sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device. Event ID — 1752 Description SD card device returned to normal [...]
-
Page 53
Severity Error Cause An SD card device sensor in the specified system detected an error. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device. Event ID — 1755 Description SD card device sensor detected a non-recoverable [...]
-
Page 54
Event ID — 2003 Description CMC reported a warning. Severity Warning Cause CMC warning event, as described in the drsCAMessage variable supplied with the alert. Event ID — 2004 Description CMC reported a critical event. Severity Critical Cause CMC critical event, as described in the drsCAMessage variable binding supplied with the alert. Event I[...]
-
Page 55
3 Storage Management Message Reference The Server Administrator Storage Management’s alert or event management features let you monitor the health of storage resources such as controllers, enclosures, physical disks, and virtual disks. Alert Monitoring and Logging The Storage Management Service performs alert monitoring and logging. By default, t[...]
-
Page 56
Table 3. Alert Message Format Alert ID Message Text Displayed in the Storage Management Service Documentation Message Text Displayed in the Alert Log with Variable Information Supplied 2127 Background Initialization started Background Initialization started: Virtual Disk 3 (Virtual Disk 3) Controller 1 (PERC 5/E Adapter) 2334 Controller event log %[...]
-
Page 57
Storage Object Message Variables where "C" is the SCSI ID number of the enclosure management module (EMM) managing the power supply. For example, 2122 Redundancy degraded: Power Supply 1, Controller 1, Connector 0, Target ID 6 SAS Power Supply Message Format: Power Supply X Controller A, Connector B, Enclosure C For example, 2312 A power [...]
-
Page 58
Event ID — 2048 Description Device failed. Severity Critical / Failure / Error Cause and Action Cause : A storage component such as a physical disk or an enclosure has failed. The failed component may have been identified by the controller while performing a task such as a rescan or a check consistency. Action : Replace the failed component. You [...]
-
Page 59
Cause and Action Cause : A physical disk in the disk group is offline. The user may have manually put the physical disk offline. Action : Perform a rescan. You can also select the offline disk and perform a Make Online operation. Related Alert Information Clear Alert Number : 2158 Related Alert Number : 2099, 2196 Local Response Agent (LRA) Number [...]
-
Page 60
Event ID — 2053 Description Virtual disk created. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2054 Description Virtua[...]
-
Page 61
Event ID — 2056 Description Virtual disk failed. Severity Critical / Failure / Error Cause and Action Cause : One or more physical disks included in the virtual disk have failed. If the virtual disk is non-redundant (does not use mirrored or parity data), then the failure of a single physical disk can cause the virtual disk to fail. If the virtua[...]
-
Page 62
Event ID — 2058 Description Virtual disk check consistency started. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2059 [...]
-
Page 63
Event ID — 2061 Description Virtual disk initialization started. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : 2088 Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2062 Des[...]
-
Page 64
Event ID — 2064 Description Virtual disk rebuild started. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : 2091 Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2065 Descriptio[...]
-
Page 65
SNMP Trap Numbers 1201 Event ID — 2070 Description Virtual disk initialization cancelled. Severity OK / Normal / Informational Cause and Action Cause : The virtual disk initialization cancelled because a physical disk included in the virtual disk has failed or because a user cancelled the virtual disk initialization. Action : If a physical disk f[...]
-
Page 66
SNMP Trap Numbers 1201 Event ID — 2076 Description Virtual disk Check Consistency failed. Severity Critical / Failure / Error Cause and Action Cause : AA physical disk included in the virtual disk failed or there is an error in the parity information. A failed physical disk can cause errors in parity information. Action : Replace the failed physi[...]
-
Page 67
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2081 SNMP Trap Numbers 1204 Event ID — 2080 Description Physical disk initialization failed. Severity Critical / Failure / Error Cause and Action Cause : The physical disk has failed or is not functioning. Action : Replace the faile[...]
-
Page 68
SNMP Trap Numbers 1204 Event ID — 2082 Description Virtual disk rebuild failed. Severity Critical / Failure / Error Cause and Action Cause : A physical disk included in the virtual disk has failed or is not functioning. A user may also have cancelled the rebuild. Action : Replace the failed or non-functional disk. You can identify a disk that has[...]
-
Page 69
Related Alert Information Clear Alert Number : Alert 2085 is a clear alert for alert 2058. Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2086 Description Virtual disk format completed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Ac[...]
-
Page 70
SNMP Trap Numbers 1201 Event ID — 2089 Description Physical disk initialization completed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : Alert 2089 is a clear alert for alert 2062. Related Alert Number : None Local Response Agent[...]
-
Page 71
Event ID — 2092 Description Physical disk rebuild completed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : Alert 2092 is a clear alert for alert 2065. Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap[...]
-
Page 72
Severity OK / Normal / Informational Cause and Action Cause : A SCSI device experienced an error, but may have recovered. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : 2273 Local Response Agent (LRA) Number : None SNMP Trap Numbers 751, 851, 901 Event ID — 2098 Description Global hot spare assigned. Seve[...]
-
Page 73
SNMP Trap Numbers 901 Event ID — 2100 Description Temperature exceeded the maximum warning threshold. Severity Warning / Non-critical Cause and Action Cause : The physical disk enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room tempera[...]
-
Page 74
examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. See the physical disk enclosure documentation for more diagnostic information. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2[...]
-
Page 75
Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : Alert 2105 is a clear alert for alert 2104. Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event ID — 2106 Description SMART FPT exceeded. Severity Warning / Non-critical Caus[...]
-
Page 76
SNMP Trap Numbers 904 Event ID — 2108 Description SMART warning. Severity Warning / Non-critical Cause and Action Cause : A disk has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action : Replace the disk that has received the SMART alert. If the physical disk is a member of a non-redundant virtual di[...]
-
Page 77
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2070 SNMP Trap Numbers 903 Event ID — 2110 Description SMART warning degraded. Severity Warning / Non-critical Cause and Action Cause : A disk is degraded and has received a SMART alert (predictive failure). The disk is likely to fa[...]
-
Page 78
Cause and Action Cause : The physical disk enclosure is either hotter or cooler than the maximum or minimum allowable temperature range. Action : Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is[...]
-
Page 79
Event ID — 2116 Description A virtual disk and its mirror have been split. Severity OK / Normal / Informational Cause and Action Cause : A user has caused a mirrored virtual disk to be split. When a virtual disk is mirrored, its data is copied to another virtual disk in order to maintain redundancy. After being split, both virtual disks retain a [...]
-
Page 80
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2120 Description Enclosure firmware mismatch. Severity Warning / Non-critical Cause and Action Cause : The firmware on the EMM is not the same version. It is required that both modules have the[...]
-
Page 81
Cause and Action Cause : One or more of the enclosure components has failed. For example, a fan or power supply may have failed. Although the enclosure is currently operational, the failure of additional components could cause the enclosure to fail. Action : Identify and replace the failed component. To identify the failed component, select the enc[...]
-
Page 82
SNMP Trap Numbers 1053 Event ID — 2124 Description Redundancy normal. Severity OK / Normal / Informational Cause and Action Cause : Data redundancy has been restored to a virtual disk or an enclosure that previously suffered a loss of redundancy. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number [...]
-
Page 83
CAUTION: Removing a physical disk that is included in a non-redundant virtual disk causes the virtual disk to fail and may cause data loss. If the disk is part of a redundant virtual disk, then any data residing on the corrupt portion of the disk is reallocated elsewhere in the virtual disk. Related Alert Information Clear Alert Number : None Relat[...]
-
Page 84
Cause and Action Cause : BGI of a virtual disk has failed. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : 2340 Local Response Agent (LRA) Number : 2081 SNMP Trap Numbers 1204 Event ID — 2130 Description BGI completed. Severity OK / Normal / Informational Cause and Action Cause : BGI of a virtual disk has [...]
-
Page 85
Cause and Action Cause : The controller driver is not a supported version. Action : Install a supported version of the driver. If you do not have a supported driver version available, you can check with your support provider for information on how to obtain the most current driver. Related Alert Information Clear Alert Number : None Related Alert N[...]
-
Page 86
Event ID — 2137 Description Communication time-out. Severity Warning / Non-critical Cause and Action Cause : The controller is unable to communicate with an enclosure. There are several reasons why communication may be lost. For example, there may be a bad or loose cable. An unusual amount of I/O may also interrupt communication with the enclosur[...]
-
Page 87
Event ID — 2139 Description Enclosure alarm disabled. Severity OK / Normal / Informational Cause and Action Cause : A user has disabled the enclosure alarm. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 851 Event ID — 2140 Description Dead[...]
-
Page 88
Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2142 Description Controller rebuild rate has changed. Severity OK / Normal / Informational Cause and Action Cause : A user has changed the controller rebuild rate. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Re[...]
-
Page 89
SNMP Trap Numbers 751 Event ID — 2145 Description Controller battery low. Severity Warning / Non-critical Cause and Action Cause : The controller battery charge is low. Action : Recondition the battery. See the online help for more information. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (L[...]
-
Page 90
SNMP Trap Numbers 753 Event ID — 2148 Description Bad block medium error. Severity Warning / Non-critical Cause and Action Cause : A portion of a physical disk is damaged. Action : See the Server Administrator Storage Management online help for more information. Related Alert Information Clear Alert Number : None Related Alert Number : None Local[...]
-
Page 91
SNMP Trap Numbers 753 Event ID — 2151 Description Enclosure asset tag changed Severity OK / Normal / Informational Cause and Action Cause : A user has changed the enclosure asset tag. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) N[...]
-
Page 92
SNMP Trap Numbers 851 Event ID — 2154 Description Maximum temperature probe warning threshold value changed. Severity OK / Normal / Informational Cause and Action Cause : A user has changed the value for the maximum temperature probe warning threshold. This alert is for informational purposes. Action : None Related Alert Information Clear Alert N[...]
-
Page 93
SNMP Trap Numbers 751 Event ID — 2157 Description Controller configuration has been reset. Severity OK / Normal / Informational Cause and Action Cause : A user has reset the controller configuration. See the online help for more information. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : Non[...]
-
Page 94
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2160 Description Dedicated hot spare assigned. Severity OK / Normal / Informational Cause and Action Cause : A user has assigned a physical disk as a dedicated hot spare to a virtual disk. This[...]
-
Page 95
Event ID — 2162 Description Communication regained. Severity OK / Normal / Informational Cause and Action Cause : Communication with an enclosure has been restored. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : Alert 2162 is a clear alert for alerts 2137 and 2292. Related Alert Number : Non[...]
-
Page 96
Local Response Agent (LRA) Number : None SNMP Trap Numbers 101 Event ID — 2165 Description The RAID controller firmware and driver validation was not performed. The configuration file cannot be opened. Severity Warning / Non-critical Cause and Action Cause : Storage Management is unable to determine whether the system has the minimum required ver[...]
-
Page 97
Severity Warning / Non-critical Cause and Action Cause : The version of the kernel and the driver do not meet the minimum requirements. Storage Management may not be able to display the storage or perform storage management functions until you have updated the system to meet the minimum requirements. Action : See the Readme file for a list of valid[...]
-
Page 98
SNMP Trap Numbers 1154 Event ID — 2170 Description The controller battery charge level is normal. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap N[...]
-
Page 99
SNMP Trap Numbers 1151 Event ID — 2173 Description Unsupported configuration detected. The SCSI rates of the enclosure management modules (EMMs) are not the same. EMM 0 % 1 EMM 1 % 2 Severity Warning / Non-critical Cause and Action Cause : An unsupported configuration was detected. Action : Replace one of the EMMs with the matching SCSI rate EMM.[...]
-
Page 100
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event ID — 2176 Description The controller battery Learn cycle has started. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Al[...]
-
Page 101
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2100 SNMP Trap Numbers 1153 Event ID — 2179 Description The controller battery Learn cycle has been postponed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Rel[...]
-
Page 102
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event ID — 2182 Description An invalid SAS configuration has been detected. Severity Critical / Failure / Error Cause and Action Cause : The controller and attached enclosures are not cabled correctly. Ac[...]
-
Page 103
Related Alert Information Clear Alert Number : None Related Alert Number : 2060 Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2185 Description Physical disk Replace Member Operation stopped for spare. Severity Warning / Non-critical Cause and Action Cause : This alert is provided for informational purposes. Action : No[...]
-
Page 104
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2060 SNMP Trap Numbers 753 Event ID — 2188 Description The controller write policy has been changed to Write Through. Severity Warning Cause and Action Cause : The controller battery is unable to maintain cached data for the require[...]
-
Page 105
Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 751 Event ID — 2191 Description Multiple enclosures are attached to the controller. This is an unsupported configuration. Severi[...]
-
Page 106
Event ID — 2193 Description The virtual disk reconfiguration has resumed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID —[...]
-
Page 107
Event ID — 2196 Description Dedicated hot spare unassigned. Physical disk % 1 Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID[...]
-
Page 108
Event ID — 2199 Description The virtual disk cache policy has changed. Severity Informational Cause and Action Cause : User has provided invalid input for the chosen operation. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — [...]
-
Page 109
SNMP Trap Numbers 903 Event ID — 2202 Description A global hot spare has been removed. Severity OK / Normal / Informational Cause and Action Cause : The controller is unable to communicate with a disk that is assigned as a global hot spare. The disk may have been removed. There may also be a bad or loose cable. Action : Check if the disk is healt[...]
-
Page 110
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2205 Description A dedicated hot spare has been automatically unassigned. Severity OK / Normal / Informational Cause and Action Cause : The hot spare is no longer required because the virtual di[...]
-
Page 111
Cause and Action Cause : The only physical disk available to be assigned as a hot spare is using SAS technology. The physical disks in the virtual disk are using SATA technology. Because of this difference in technology, the hot spare cannot rebuild data if one of the physical disks in the virtual disk fails. Action : Add a SATA disk that is large [...]
-
Page 112
Event ID — 2212 Description The controller battery temperature is above normal. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event [...]
-
Page 113
Event ID — 2215 Description Battery charge process interrupted. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event ID — 2216 Desc[...]
-
Page 114
Event ID — 2218 Description None of the Controller Property are set. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : You should change at least one controller property and run the command again. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Re[...]
-
Page 115
Event ID — 2221 Description Auto Replace Member Operation on Predictive Failure, Abort CC on Error and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : Change at least one controller property and run the command again. Related Alert Information Clear Alert Number[...]
-
Page 116
Event ID — 2224 Description Replace Member Operation and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : Change at least one controller property and run the command again. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Resp[...]
-
Page 117
Event ID — 2227 Description Abort Check Consistency on Error, Replace Member Operation and Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : Change at least one controller property and run the command again. Related Alert In[...]
-
Page 118
Event ID — 2230 Description Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : Change at least one controller property and run the command again. Related Alert Information Clear Alert Number : None Related Alert Number : None[...]
-
Page 119
Event ID — 2233 Description The Background initialization (BGI) rate has changed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 751 Event[...]
-
Page 120
Event ID — 2236 Description Replace Member Operation modified. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : Change at least one controller property and run the command again. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA[...]
-
Page 121
Event ID — 2239 Description A foreign configuration has been cleared. Severity OK / Normal / Informational Cause and Action Cause : The user has attempted to clear a foreign configuration. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (L[...]
-
Page 122
Event ID — 2242 Description The Patrol Read operation has started. Severity OK / Normal / Informational Cause and Action Cause : The controller has started the Patrol Read operation. This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : 2243 Related Alert Number : None Local Response Agent (LRA) Nu[...]
-
Page 123
Event ID — 2245 Description A virtual disk blink has ceased. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2246 Descrip[...]
-
Page 124
Event ID — 2248 Description The controller battery is executing a Learn cycle. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event I[...]
-
Page 125
Event ID — 2251 Description The physical disk blink has initiated. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2252 De[...]
-
Page 126
Event ID — 2254 Description The Clear operation has cancelled. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2255 Descri[...]
-
Page 127
Event ID — 2258 Description Controller has preserved cache. Severity Warning /Non-critical Cause and Action Cause : I/O interrupted for a virtual disk which is connected to the controller. Action : Check for foreign configuration and import if any. Check for cable fault. Recover any virtual disk lost by the controller. Related Alert Information C[...]
-
Page 128
Event ID — 2261 Description A global rescan has initiated. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 751 Event ID — 2262 Descriptio[...]
-
Page 129
Event ID — 2264 Description A device is missing. Severity Warning / Non-critical Cause and Action Cause : The controller cannot communicate with a device. The device may be removed. There may also be a bad or loose cable. Action : Check if the device is in and not removed. If it is in, check the cables. Also check the connection to the controller[...]
-
Page 130
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 751, 801, 851, 901, 951, 1001, 1051, 1101, 1151, 1201 Event ID — 2267 Description The controller reconstruct rate has changed. Severity OK / Normal / Informational Cause and Action Cause : This alert is for in[...]
-
Page 131
Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2270 Description The physical disk Clear operation failed. Severity Critical[...]
-
Page 132
Event ID — 2272 Description Patrol Read found an uncorrectable media error. Severity Critical / Failure / Error Cause and Action Cause : The Patrol Read task has encountered an error that cannot be corrected. There may be a bad disk block that cannot be remapped. Action : Back up your data. If you are able to back up the data successfully, then f[...]
-
Page 133
SNMP Trap Numbers 901 Event ID — 2276 Description The dedicated hot spare is too small. Severity Warning / Non-critical Cause and Action Cause : The dedicated hot spare is not large enough to protect all virtual disks that reside on the disk group. Action : Assign a larger disk as the dedicated hot spare. Related Alert Information Clear Alert Num[...]
-
Page 134
Related Alert Information Clear Alert Number : None Related Alert Number : 2199 Local Response Agent (LRA) Number : None SNMP Trap Numbers 1153 Event ID — 2279 Description The controller battery charge level is operating within normal limits. Severity OK / Normal / Informational Cause and Action Cause : This alert indicates that the battery is re[...]
-
Page 135
Action : None Related Alert Information Clear Alert Number : None Related Alert Number : 2127 Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2282 Description Hot spare SMART polling failed. Severity Critical / Failure / Error Cause and Action Cause : The controller firmware attempted a SMART polling on the hot spare bu[...]
-
Page 136
Event ID — 2284 Description A redundant path has been restored. Severity OK / Normal / Informational Cause and Action Cause : This alert is provided for informational purposes. Action : None Related Alert Information Clear Alert Number : Alert 2284 is a clear alert for alert 2283. Related Alert Number : None Local Response Agent (LRA) Number : 20[...]
-
Page 137
Event ID — 2287 Description Protection policy has been changed. Severity OK / Normal / Informational Cause and Action Cause : A new protection policy has been created / existing protection policy has been modified. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : 2384 Local Response Agent (LRA) Number : Non[...]
-
Page 138
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2061 SNMP Trap Numbers 754 Event ID — 2290 Description Single-bit ECC error on controller DIMM. Severity Warning / Non-critical Cause and Action Cause : An error involving a single bit has been encountered during a read or write ope[...]
-
Page 139
Related Alert Information Clear Alert Number : 2162 Related Alert Number : None Local Response Agent (LRA) Number : 2091 SNMP Trap Numbers 854 Event ID — 2293 Description The EMM has failed. Severity Critical / Failure / Error Cause and Action Cause : The failure may be caused by a loss of power to the EMM. The EMM self test may also have identif[...]
-
Page 140
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2091 SNMP Trap Numbers 854 Event ID — 2296 Description An EMM has been inserted. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear A[...]
-
Page 141
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2090 SNMP Trap Numbers 853 Event ID — 2299 Description Bad PHY %1 Severity Critical / Failure / Error Cause and Action Cause : There is a problem with a physical connection or PHY. The %1 indicates a substitution variable. The text [...]
-
Page 142
Severity Critical / Failure / Error Cause and Action Cause : The enclosure or an enclosure component is in a Failed or Degraded state. Action : Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See the hardware documentation for more information. Related Alert Information Clear Alert Number : None[...]
-
Page 143
Event ID — 2304 Description An attempt to hot plug an EMM has been detected. This type of hot plug is not supported. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : 2211 Local Response Agent (LRA) Number[...]
-
Page 144
Related Alert Information Clear Alert Number : None Related Alert Number : 2307 Local Response Agent (LRA) Number : 2070 SNMP Trap Numbers 903 Event ID — 2307 Description Bad block table is full. Unable to log block %1. Severity Critical / Failure / Error Cause and Action Cause : The bad block table is used for remapping bad disk blocks. This tab[...]
-
Page 145
Severity Critical / Failure / Error Cause and Action Cause : A redundant virtual disk has lost redundancy. This may occur when the virtual disk suffers the failure of multiple physical disks. In this case, both the source physical disk and the target disk with redundant data have failed. A rebuild is not possible because there is no redundancy. Act[...]
-
Page 146
Event Id — 2313 Description A power supply in the enclosure has a DC failure. Severity Warning / Non-critical Cause and Action Cause : The power supply has a DC failure. Action : Replace the power supply. Related Alert Information Clear Alert Number : 2323 Related Alert Number : 2122, 2333 Local Response Agent (LRA) Number : 2090 SNMP Trap Number[...]
-
Page 147
SNMP Trap Numbers 751 Event ID — 2316 Description Diagnostic message %1 Severity Critical / Failure / Error Cause and Action Cause : A diagnostics test failed. The %1 indicates a substitution variable. The text for this substitution variable is generated by the utility that ran the diagnostics and is displayed with the alert in the alert log. Thi[...]
-
Page 148
Related Alert Information Clear Alert Number : 753 Related Alert Number : 2320 Local Response Agent (LRA) Number : 2060 SNMP Trap Numbers 753 Event Id — 2320 Description Single-bit ECC error. The DIMM is critically degraded. Severity Critical / Failure / Error Cause and Action Cause : The DIMM is malfunctioning. Data loss or data corruption may b[...]
-
Page 149
Severity Informational Cause and Action Cause : The power supply unit is switched off. Either a user switched off the power supply unit or it is defective. Action : Check if the power switch is turned off. If it is turned off, turn it on. If the problem persists, check if the power cord is attached and functional. If the problem is still not correc[...]
-
Page 150
Event ID — 2325 Description The power supply cable has been inserted. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Status : Alert 2325 is a clear alert for alerts 2324 and 2312. Related Alert Number : None Local Response Agent (LRA) Numb[...]
-
Page 151
Related Alert Information Clear Alert Number : None Related Alert Number : 2266 Local Response Agent (LRA) Number : 2060 SNMP Trap Numbers 753 Event ID — 2328 Description The NVRAM has corrupt data. Severity Warning / Non-critical Cause and Action Cause : The NVRAM has corrupt data. The controller is unable to correct the situation. Action : Repl[...]
-
Page 152
Severity OK / Normal / Informational Cause and Action Cause : The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text can vary depending on the situation. This alert is for informational purposes. Action : None Related Alert Informat[...]
-
Page 153
Event ID — 2334 Description Controller event log: %1 Severity OK / Normal / Informational Cause and Action Cause : The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text is from events in the controller event log that were generat[...]
-
Page 154
Storage Management was not running. This text can vary depending on the situation. Action : See the hardware documentation for more information. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2061 SNMP Trap Numbers 754 Event ID — 2337 Description The controller is unable to reco[...]
-
Page 155
Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 751 Event ID — 2340 Description The BGI completed with uncorrectable errors. Severity Criti[...]
-
Page 156
Event ID — 2342 Description The Check Consistency found inconsistent parity data. Data redundancy may be lost. Severity Warning / Non-critical Cause and Action Cause : The data on a source disk and the redundant data on a target disk is inconsistent. Action : Restart the Check Consistency task. If you receive this alert again, check the health of[...]
-
Page 157
SNMP Trap Numbers 1203 Event ID — 2345 Description The virtual disk initialization failed. Severity Critical / Failure / Error Cause and Action Cause : The controller cannot communicate with attached devices. A disk may be removed or contain errors. Cables may also be loose or defective. Action : Verify the health of attached devices. Review the [...]
-
Page 158
Cause and Action Hardware RAID: Cause and Action Cause : You are attempting to rebuild data that resides on a defective disk. Action : Replace the source disk and restore from backup. Software RAID: • Perform a backup with the Verify option. • If the file backup fails, try to restore the failed file from a previous backup. • When the backup w[...]
-
Page 159
Local Response Agent (LRA) Number : 2071 SNMP Trap Numbers 904 Event ID — 2350 Description There was an unrecoverable disk media error during the rebuild or recovery operation. Severity Critical / Failure / Error Cause and Action Cause : The rebuild or recovery operation encountered an unrecoverable disk media error. Action : Replace the disk. Re[...]
-
Page 160
SNMP Trap Numbers 901 Event ID — 2353 Description The enclosure temperature has returned to normal. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Status : Alert 2353 is a clear alert for alerts 2100 and 2101. Related Alert Number : None L[...]
-
Page 161
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : 2090 SNMP Trap Numbers 853 Event ID — 2356 Description SAS SMP Communications error %1. Severity Critical / Failure / Error Cause and Action Cause : The text for this alert is generated by the firmware and can vary depending on the [...]
-
Page 162
SNMP Trap Numbers 754 Event ID — 2358 Description The battery charge cycle is complete. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 115[...]
-
Page 163
Event ID — 2361 Description Physical disk(s) that are part of a virtual disk have been removed while the system was shut down. This removal was discovered during system start-up. Severity Warning Cause and Action Cause : This alert is for informational purposes. Action : None. Related Alert Information Clear Alert Number : None Related Alert Numb[...]
-
Page 164
Event ID — 2366 Description Dedicated spare imported as global due to missing arrays. Severity OK / Normal / Informational Cause and Action Cause : This alert is for informational purposes. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 E[...]
-
Page 165
SNMP Trap Numbers 851 Event ID — 2369 Description Virtual Disk Redundancy has been degraded. Severity OK / Normal / Informational Cause and Action Cause : A physical disk in a RAID 6 virtual disk has either failed or been removed. Action : Replace the missing or failed physical disk. Related Alert Information Clear Alert Number : 2121 Related Ale[...]
-
Page 166
Event ID — 2372 Description Attempted import of Virtual Disk exceeding the limit supported on the controller. Severity OK / Normal / Informational Cause and Action Cause : This alert is provided for informational purposes. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Num[...]
-
Page 167
Event ID — 2375 Description Attempted import of Virtual Disk with missing physical disk. Severity OK / Normal / Informational Cause and Action Cause : User is attempting to import a foreign virtual disk with a missing physical disk. This alert is provided for informational purposes. Action : None. Related Alert Information Clear Alert Number : No[...]
-
Page 168
Event ID — 2378 Description Attempted import of an incompatible physical drive. Severity OK / Normal / Informational Cause and Action Cause : User is attempting to import an incompatible physical drive. This alert is provided for informational purposes. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None[...]
-
Page 169
Event ID — 2381 Description Controller preserved cache is recovered. Severity OK / Normal / Informational Cause and Action Cause : This alert is provided for informational purposes. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 751 Event ID[...]
-
Page 170
SNMP Trap Numbers 1201 Event ID — 2384 Description The Warning level set for the hot spare protection policy is violated for the Virtual Disk. Severity Warning / Non-critical Cause and Action Cause : The number of physical disks you specified for the hot spare protection policy is violated. Action : Reassign the number of hot spares as specified [...]
-
Page 171
Related Alert Information Clear Alert Number : 2195 Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2387 Description A virtual disk bad block medium error is detected. Severity Critical / Failure / Error Cause and Action Cause : Virtual disk bad blocks are due to presence of unrecoverable bad [...]
-
Page 172
SNMP Trap Numbers 751 Event ID — 2389 Description The virtual disk bad block medium error is cleared. Severity OK / Normal / Informational Cause and Action Cause : Virtual disk bad blocks are cleared. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap N[...]
-
Page 173
Event ID — 2393 Description The virtual disk is encrypted. Severity OK / Normal / Informational Cause and Action Cause : The Encrypted virtual disk operation on normal virtual disk (created using Self encrypting disks only) is successful. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response[...]
-
Page 174
Event ID — 2396 Description The Check Consistency detected uncorrectable multiple medium errors. Severity Critical / Failure / Error Cause and Action Cause : The Check Consistency task detects uncorrectable multiple errors. Action : Replace the failed physical disk. You can identify the failed disk by locating the disk that has a red “X” for [...]
-
Page 175
SNMP Trap Numbers 751 Event ID — 2399 Description The Physical Disk Power status changed from 1% to 2%. Severity OK / Normal / Informational Cause and Action Cause : The physical disk power status is changed from one state to another. A physical disk can have the following power statuses: spun down, transition, and spun up. Action : None. Related[...]
-
Page 176
SNMP Trap Numbers 754 Event ID — 2402 Description Changing the Physical Disk Power status from 1% to 2% failed. Severity Failure / Error Cause and Action Cause : When changing the Physical Disk Power status fails. Action : Replace the physical disk. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Age[...]
-
Page 177
SNMP Trap Numbers 1201 Event ID — 2405 Description Command timeout on physical disk. Severity Warning Cause and Action Cause : The spundown physical disks take more time than the timeout period and the configuration commands are timed out. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Respons[...]
-
Page 178
Event ID — 2412 Description Controller CacheCade is resized. Severity Informational Cause and Action Cause : This alert is provided for informational purposes. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201 Event ID — 2413 Description[...]
-
Page 179
Event ID — 2415 Description Controller battery is discharging. Severity Informational Cause and Action Cause : The battery learn cycle has started. Action : None Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1151 Event ID — 2416 Description Disk medium [...]
-
Page 180
NOTE: If the unrecoverable medium error has not been corrected, it may be reported again by the system. This error can be fixed by writing data on the affected area or deleting and recreating the Virtual Disk as demonstrated in the following procedure. 1. Back up the data. 2. Delete the Virtual Disk. 3. Recreate the Virtual Disk using the same para[...]
-
Page 181
Event ID — 2426 Description State change on Physical disk from Non- RAID to READY. Severity Informational Cause and Action Cause : User triggered action. Action : Configure the drive to be ready using CLI/GUI. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers[...]
-
Page 182
Event ID — 2431 Description Physical Device Full Initialization completed. Severity Informational Cause and Action Cause : User triggered task. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2432 Description The PCIeSSD devi[...]
-
Page 183
Event ID — 2434 Description Physical Device has reached or exceeded its warranted device wear-out limit. Severity Warning Cause and Action Cause : User triggered task. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 903 Event ID — 2435 Desc[...]
-
Page 184
Event ID — 2437 Description The physical device blink has initiated. Severity Informational Cause and Action Cause : User triggered task. Action : None. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2438 Description The physical device bl[...]
-
Page 185
Event ID — 2441 Description The PCIe solid state device identified in the message has turned off because the critical temperature threshold of the device was exceeded. Severity Error Cause and Action Cause : None Action : Contact your service provider. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response [...]
-
Page 186
SNMP Trap Numbers 904 Event ID — 2444 Description The Patrol Read operation was manually stopped before completion. Severity Informational Cause and Action Cause : User Triggered Task Action : If desired, restart the Patrol Read operation at a later time. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Respon[...]
-
Page 187
. Event ID — 2700 Description The following journal mirror is available. %1 Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1601 Event ID — 2701 Description The following journal mirror is being re[...]
-
Page 188
Event ID — 2703 Description There are not enough journal mirrors available to operate. : FluidCache. Severity Error Cause and Action To resolve the issue, you must ensure that there are at least two journal mirrors that are accessible. You must activate either one or more failed cache devices or use the fldc_restore utility to rebuild the node. R[...]
-
Page 189
Event ID — 2874 Description The following Cache Device has no associated server in the configuration: %1 : FluidCache. Severity Warning Cause and Action There is a cache device specified in the configuration with no associated cache server configured. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response A[...]
-
Page 190
Event ID — 2900 Description The following cache device has failed. (wwn) %1 (path) %2 : FluidCache. Severity Error Cause and Action Replace the failed device. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 904 Event ID — 2901 Description The following st[...]
-
Page 191
Event ID — 2903 Description The following cache device has been registered. (ww n) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2904 Description The fol[...]
-
Page 192
Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1201, 1501 Event ID — 2907 Description Caching has been enabled on the following storage device. (wwn) %1 (path) %2 : FluidCache. Severity Information [...]
-
Page 193
Cause and Action Service is required. Contact Dell Technical Support. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1203, 1503 Event ID — 2910 Description Caching has been disabled for the following storage device. (wwn) %1 (path) %2 : FluidCache. Severit[...]
-
Page 194
Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 901 Event ID — 2913 Description The following failed cache device has completed recovery. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Cl[...]
-
Page 195
SNMP Trap Numbers 1604 Event ID — 2916 Description Running on an evaluation license. Days remaining %1 (days): FluidCache. Severity Information Cause and Action A permanent license should be purchased. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1601 Ev[...]
-
Page 196
Event ID — 2919 Description Running on an expired/invalid license. Configuration changes are disabled.: FluidCache. Severity Error Cause and Action A valid permanent license must be installed. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1604 Event ID ?[...]
-
Page 197
Event ID — 2922 Description Not enough memory to run necessary services.: FluidCache. Severity Error Cause and Action You must run on a system with adequate memory. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1604 Event ID — 2923 Description One or mo[...]
-
Page 198
Event ID — 2930 Description Even though caching was enabled in write-back mode, it is currently operating in write-through mode.: FluidCache. Severity Warning Cause and Action To resolve the issue, add a PCIe SSD to the cache pool. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : [...]
-
Page 199
Event ID — 2933 Description Caching is no longer degraded to pass-through mode and is now operating in its configured mode.: FluidCache. Severity Warning Cause and Action No action required. Related Alert Information Clear Alert Number : None Related Alert Number : None Local Response Agent (LRA) Number : None SNMP Trap Numbers 1203, 1503 199[...]
-
Page 200
200[...]
-
Page 201
4 System Event Log Messages for IPMI Systems The tables in this chapter list the system event log (SEL) messages, their severity, and cause. NOTE: For corrective actions, see the appropriate documentation. Temperature Sensor Events The temperature sensor event messages help protect critical components by alerting the systems management console when[...]
-
Page 202
Event Message Severity Cause The <Sensor Name/ Location> temperature is less than the lower critical threshold. Critical Temperature of the backplane, system board, system inlet, or the carrier in the specified system <Sensor Name/Location> entered into critical state. The <Sensor Name/ Location> temperature is greater than the up[...]
-
Page 203
Event Message Severity Cause <Sensor Name/Location> voltage sensor detected a warning <Reading>. Warning Voltage of the monitored entity <Sensor Name/Location> exceeded the warning threshold. <Sensor Name/Location> voltage sensor returned to normal <Reading>. Information The voltage of a previously reported <Sensor [...]
-
Page 204
Event Message Severity Cause is the entity that this sensor is monitoring. For example "BMC Back Fan" or "BMC Front Fan." Reading is specified in RPM. For example, 100 RPM. <Sensor Name/Location> Fan sensor returned to normal state <Reading>. Information The fan specified by <Sensor Name/ Location> has returned[...]
-
Page 205
Event Message Severity Cause Fan <number> RPM is within range. Information The speed of the specified fan is operating in a normal range. Fan <number> is removed. Critical A required fan was removed. Fan <number> was inserted. Information A fan was added. Fan <number> is present. Information The total number of fans present.[...]
-
Page 206
Event Message Severity Cause <Processor Entity> status processor sensor disabled. Warning This event is generated for all processors that are disabled. <Processor Entity> status processor sensor terminator not present. Information This event is generated if the terminator is missing on an empty processor slot. <Processor Entity> p[...]
-
Page 207
Event Message Severity Cause CPU <number> terminator is absent. Warning This event is generated if the terminator is missing on an empty processor slot. CPU <number> is throttled. Warning This event is generated when the processor slows down to prevent overheating. CPU <number> is absent. Critical This event is generated when the [...]
-
Page 208
Event Message Severity Cause <Power Supply Sensor Name> predictive failure was asserted. Critical This event is generated when the power supply is about to fail. <Power Supply Sensor Name> input lost was asserted. Critical This event is generated when the power supply is unplugged. <Power Supply Sensor Name> predictive failure was[...]
-
Page 209
Event Message Severity Cause PS 1 Status: Power supply sensor for PS 1, configuration error was asserted. Warning/Critical This event is generated when an invalid power supply configuration is detected. PS 1 Status: Power supply sensor for PS 1, configuration error was deasserted. Information This event is generated when the power supply has recove[...]
-
Page 210
Event Message Severity Cause The temperature for power supply <number> is outside of range. Critical Temperature of specified power supply entered into critical state. An under voltage fault detected on power supply <number>. Critical The specified power supply detected inefficient voltage. An over voltage fault detected on power supply[...]
-
Page 211
Memory ECC Events The memory ECC event messages monitor the memory modules in a system. These messages monitor the ECC memory correction rate and the type of memory events that occurred. Table 10. Memory ECC Events Event Message Severity Cause ECC error correction detected on Bank # DIMM [A/B]. Information This event is generated when there is a me[...]
-
Page 212
BMC Watchdog Events Enter a short description for your reference topic. This should be one or two sentences that describes the topic content. Table 11. BMC Watchdog Events Event Message Severity Cause BMC OS Watchdog timer expired. Information This event is generated when the BMC watchdog timer expires and no action is set. BMC OS Watchdog performe[...]
-
Page 213
Event Message Severity Cause was received from Host) and the action is set to power off. The OS watchdog timer expired. Critical This event is generated when the BMC watchdog timer expires and no action is set. Memory Events The memory modules can be configured in different ways in particular systems. These messages monitor the status, warning, and[...]
-
Page 214
Event Message Severity Cause Memory Spared redundancy regained. Information This event is generated when the redundancy lost or degraded earlier is regained in a spared memory configuration. Memory RAID is redundant. Information This event is generated when the memory redundancy mode has change to RAID redundant. Memory RAID redundancy is lost. Che[...]
-
Page 215
Hardware Log Sensor Events The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full. Table 13. Hardware Log Sensor Events Event Message Severity Cause [...]
-
Page 216
Event Message Severity Cause Drive <Drive #> consistency check in progress was deasserted. Information This event is generated when the consistency check of the drive is completed. Drive <Drive #> in critical array was asserted. Critical This event is generated when the drive is placed in critical array. Drive <Drive #> in critica[...]
-
Page 217
Event Message Severity Cause < Intrusion sensor Name > sensor intrusion was asserted while system was ON. Critical This event is generated when the intrusion sensor detects an intrusion while the system is on. < Intrusion sensor Name > sensor intrusion was asserted while system was OFF. Critical This event is generated when the intrusio[...]
-
Page 218
Event Message Severity Cause System Event PCI System Err. Information This event indicates historical data, and is generated when the system has crashed and recovered. System Event PCI Fatal Err. Critical This error is generated when a fatal error is detected on the PCI bus. System Event PCIE Fatal Err. Critical This error is generated when a fatal[...]
-
Page 219
Event Message Severity Cause Memory Removed (BANK# DIMM#) presence was asserted. Information This event is generated when memory is removed from the system. Memory Cfg Err configuration error (BANK# DIMM#) was asserted. Critical This event is generated when memory configuration is incorrect for the system. Mem Redun Gain redundancy regained. Inform[...]
-
Page 220
Event Message Severity Cause SBE Log Disabled correctable memory error logging disabled was asserted. Critical This event is generated when the ECC single bit error rate is exceeded. CPU Protocol Err transition to non- recoverable. Critical This event is generated when the processor protocol enters a non- recoverable state. CPU Bus PERR transition [...]
-
Page 221
Event Message Severity Cause An I/O channel check error was detected. Critical This event is generated when a critical interrupt is generated in the I/O Channel. A PCI parity error was detected on a component at bus <number> device <number> function <number>. Critical This event is generated when a parity error is detected on the [...]
-
Page 222
Event Message Severity Cause A fatal error was detected on a component at slot <number>. Critical This error is generated when a fatal error is detected on the PCI bus. A fatal IO error detected on a component at bus <number> device <number> function <number>. Critical This error is generated when a fatal IO error is detecte[...]
-
Page 223
Event Message Severity Cause An OEM diagnostic event occurred. Information This event is generated when an OEM event occurs. OEM events can be used by the service team to better understand the cause of the failure. CPU <number> protocol error detected. Critical This event is generated when the processor protocol enters a non- recoverable stat[...]
-
Page 224
Event Message Severity Cause Device option ROM on mezzanine card <number> failed to support Link Tuning or FlexAddress. Critical This event is generated when the PCI device option ROM for a NIC does not support link tuning or the Flex addressing feature. Failed to program virtual MAC address on a component at bus <bus> device <device[...]
-
Page 225
Fatal Error Code Description Cause 85 DMA controller failure. This error code indicates DMA controller failure. 86 Interrupt controller failure. This error code indicates interrupt controller failure. 87 Timer refresh failure. This error code indicates timer refresh failure. 88 Programmable interval timer error. This error code indicates a programm[...]
-
Page 226
Operating System Generated System Events Table 18. Operating System Generated System Events Description Severity Cause System Event: OS stop event OS graceful shutdown detected Information The operating system was shutdown/restarted normally. OEM Event data record (after OS graceful shutdown/restart event) Information Comment string accompanying an[...]
-
Page 227
Description Severity Cause connected or is improperly connected. not connected or is incorrectly connected. The <name> cable or interconnect is connected. Information This event is generated when named cable or interconnect earlier cable or interconnect connection error was corrected. Battery Events Table 20. Battery Events Description Severi[...]
-
Page 228
Power And Performance Events The power and performance events are used to detect degradation in system performance with change in power supply. Table 21. Power And Performance Events Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, degraded, <description of why> was deasserted Normal This ev[...]
-
Page 229
Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was asserted Critical This event is generated when a change in power supply degrades system performance. System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds cap[...]
-
Page 230
Entity Presence Events The entity presence messages are used for detecting different hardware devices. Table 22. Entity Presence Events Description Severity Cause <Device Name> presence was asserted Information This event is generated when the device was detected. <Device Name> absent was asserted Critical This event is generated when t[...]
-
Page 231
Description Severity Cause (BMC firmware) was asserted Hdwar version err: Version Change sensor, hardware incompatibility (BMC firmware and CPU mismatch) was asserted Critical This event is generated when the CPU and firmware are not compatible. Link Tuning: Version Change sensor, successful software or F/W change was deasserted Warning This event [...]
-
Page 232
Description Severity Cause The QuickPath Interconnect (QPI) width degraded. Warning This event is generated when the bus is not operating at maximum speed or width. The QuickPath Interconnect (QPI) width regained. Information This event is generated when the bus is operating at maximum speed or width. BIOS detected an error configuring the Intel Tr[...]