Denon AVR-3310 manuel d'utilisation

AV SURROUND RECEIVER AVR-3310CI Owner’s Manual  G raphical U ser I nterface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation ( v page 26) GUI Menu Map ( v page 25) Remote Control Unit Operations ( v page 86)[...]

I n SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within[...]

II • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Manipuler le cordon d’alimentati[...]

 Contents n Getting Started Flow of Operations Through Playback ········································ 2 Cautions on Handling ··································································· 2 Cautions on Installation ········?[...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Perform the operations leading to playback on the AVR-3310CI in the order shown below. Audyssey ™ Auto Setup ( v page 28) Connections Installing/Setting the Speakers ( v page 11) Speaker Connections ( v page 13) Connecting Devices ( v page [...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications In addition to the AVR-3310CI, the included main remote control unit (RC-1118) can also be used to operate the equipment listed below. q DENON system components w Non-DENON system components To operate component products other than DENON, you[...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications For buttons not explained here, see the page indicated in parentheses ( ). Part Names and Functions t q w e r Q5 Q6 Q4 Q3 y o Q0 Q1 Q2 u i W5 Q7 Q8 Q9 W0 W1 W4 W3 W2 E1 E6 W9 E0 E4 E5 E2 E3 W8 W7 W6 q Power operation button ·········[...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications i o Q5 Q8 W0 W1 Q0 Q1 Q6 Q2 Q4 Q3 Q7 Q9 u w q e r t y q Input signal indicators w Input signal channel indicators These light when digital signals are input. When playing HD Audio sources, the“ ” indicator lights when an extension channel[...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications t e y u i o Q0 Q2 Q6 Q6 Q0 Q1 q r w Q3 Q4 Q5 Q7 Q8 Q7 Part Names and Functions q SIRIUS connector ······································· (1 9) w RS-232C connector ···················?[...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Remote Control Unit Part Names and Functions Main Remote Control Unit (RC-1118) Getting Started w q e t r y u i o Q0 Q2 Q1 Q3 Q4 Q5 Q6 Q7 W0 Q9 r Q8 W1 W3 E0 W9 W6 W5 W4 W7 W8 NO TE Buttons on the back panel may operate when the back lid is p[...]

 Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications q t r y i o Q0 u e w Q6 Q5 Q8 W0 W1 W2 W3 Q9 Q7 Q2 Q3 Q4 Q1 q ZONE indicators ········································· (92) w QUICK SELECT buttons ······················· (80, 8[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connections for all compatible audio and video signal formats are described in this owner’s manual. Please select the types of connections suited for the equipment you are connecting. After connections are completed, certain settings m[...]

0 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Converting Input Video Signals for Output (Video Conversion Function) Resolutions of HDMI-compatible TVs can be checked at “HDMI Information” – “Monitor Information” ( v page 76). NOTE HDMI signals cannot be converted into ana[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications z 1 z 3 z 2 Installing / Setting the Speakers • The AVR-3310CI is compatible with various types of surround playback. • Decide on the surround modes to be played on the AVR-3310CI before making connections and settings. Surround b[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications s Set the “Amp Assign” Mode According to the Speaker Layout The signals output from the AVR-3310CI’s SURR. BACK/AMP ASSIGN speaker terminals can be switched ( v page 34 “Amp Assign”). Amp assign mode ( v page 34) SURR. BACK [...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting the Speaker Cables Protection Circuit If the core wires touch the rear panel and the screws etc., or the ± sides touch each other, the protection circuit will be activated and the power indicator will flash red at interva[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices 065 )%.* 065 )%.* 065 )%.* 065 )%.* 065 )%.* */ )%.* DVD player HD player Satellite receiver Game console Digital video recorder Monitor Connecting Devices Equipped with HDMI Terminals Important Information About HD[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Select the terminal to use and connect the device. For video connections, see “Converting Input Video Signals for Output (Video Conversion Function)” ( v page 10). • • */ 7*%&0 $0.10/&/57*%&0 : 1 # 1[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices R L R L "4%3 Control dock for iPod Set other than when iPod is assigned to the VCR (iPod) terminal. “Input Assign” – “iPod dock“ ( v page 47) Set as Necessary Control Dock for iPod Use a DENO[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices Connecting the Recording Components Connections (/% "6%*0 065 R L Turntable (MM cartridge) Record Player The AVR-3310CI is compatible with record players with an MM cartridge. When you connect to a record playe[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connect the Tuner Connecting Devices TV Select the terminal to use and connect the device. R L R L 3 - 065 "6%*0 7*%&0 "6%*0 065 7*%&0 47*%&0 065 065 015*$"- TV Set this to change the input si[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices Connections When connecting digital of the SiriusConnect Home Tuner, perform the setting “Digital”. “Input Assign” ( v page 45) Set as Necessary SIRIUS Connector The AVR-3310CI is a SIRIUS Satellite Radio Re[...]

0 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices Connections AM loop antenna assembly n Remove the vinyl tie and take out the connection line. Bend in the reverse direction. a. With the antenna on top of any stable surface. Mount b. With the antenna attached to a wa[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices Connections R L R L R L R L R L R L 46# 800'&3 $&/5&3 463306/% #"$, 3 - 463306/% 3 - '30/5 3 - "6%*0 Component with Multi-channel Output connectors The video signal can be connecte[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Connecting Devices "69 065 When connecting a 2nd device, connect to the TRIGGER OUT 2 terminal in the same way as the TRIGGER OUT 1 terminal. TRIGGER OUT jacks The TRIGGER OUT output terminal outputs a maximum 12 V/150 mA elec[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications If you have an Internet provider contract for a line on which network settings are made manually, make the settings at “Network Connecting” ( v page 38). With the AVR-3310CI, it is possible to use the DHCP and Auto IP functions to[...]

 Getting Star ted Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Once Connections are Completed 1 Press <POWER> . The power indicator lights red and the power is set to the standby mode. 2 Press [ON/SOURCE] or <ON/ST ANDBY> . The power indicator flashes green and the power turns on. Al[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Settings Setting Items that only need t o be set once Set these for e xample upon purc hase. Once these items are set, there is no need to set them again unless the speaker lay out or the connected speakers ha ve been c hanged. Se[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications When a TV is connected to the AVR-3310CI, the GUI menu, sound field parameters, etc., can be displayed on the TV. This allows you to operate the AVR-3310CI and make settings on it while looking at the GUI menu displayed on the TV[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications GUI Menu Operation Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” ( v page 42). To turn off the source selection menu without selecting an input source, press [SOURCE[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications n When using Surround Back Speakers G Example q H G Example w H FL SW C FR SL SR SBR SBL * M FL SW C FR SL SR SBR SBL * M The acoustic characteristics of the connected speakers and listening room are measured and the optimum setti[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey ™ Auto Setup) Do not remove the setup microphone until Audyssey Auto Setup is completed. When using headphones, unplug the headphones before starting Au[...]

0 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey ™ Auto Setup) s Audyssey Auto Setup Preparations around items indicate the default setting. Perform the following settings if adjustments, etc., are requi[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey ™ Auto Setup) STEP5 Check 8 Use ui to select the item you want to check, then press ENTER . The measurement result confirmation screen is displayed. Sp[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey ™ Auto Setup) Error Messages When Performing Audyssey Auto Setup Over Again Press ui to select “Retry”, and then press ENTER . When Measuring has St[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey ™ Auto Setup) This is displayed after Audyssey Auto Setup procedure is completed. If you set “Restore” to “Yes”, you can return to Audys[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Setting items Setting contents Amp Assign Sets the signal output to the speaker connected to the SURR. BACK/AMP ASSIGN terminals. Normal : The surround back channel audio signals are output. ZONE2 : The ZONE2 audio signals are out[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Setting it ems Setting cont ents Bass Setting Settings for subwoofer and LFE signal range playback. Subwoofer Mode : Select low range signals to be reproduced by subwoofer. LFE : The low range signal of the channel set to “Small[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Setting it ems Setting cont ents Front Speaker Setup Set the front speakers to use for every surround mode. Setting : Choose the method for setting the front speakers. Normal : The front speakers are set using the <FRONT SPEAKE[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making Detailed Settings (Manual Setup) Setting Setting it ems Setting cont ents EXT . IN SW Lev el Set the playback level of the analog subwoofer signals in- put from the external input terminals (EXT. IN). +15dB : This is the re[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications See overleaf Making Detailed Settings (Manual Setup) Setting Setting it ems Setting cont ents EQ Customize (Continued) Audyssey Flat : Set when not using the “Audyssey Flat” equalizer. Used : Use. Not Used : Do not use. Set so[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Setting it ems Setting cont ents Network Connecting (Continued) Proxy settings : Make this setting when connecting to the Internet via a proxy server. q On the GUI menu, select “Network Connecting” – “Detail” and press E[...]

0 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making Detailed Settings (Manual Setup) Setting Setting it ems Setting cont ents Other (Continued) Party Start Level : Make settings for volume level when the Party Mode is started. Last : The same volume as set before the party mod[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making Detailed Settings (Manual Setup) Setting it ems Setting cont ents Bass Adjust low frequency range (bass). –10dB ~ +10dB ( 0dB ) Treble Adjust high frequency range (treble). –10dB ~ +10dB ( 0dB ) HPF Make settings for cu[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making Detailed Settings (Manual Setup) Setting items Setting contents Source Delete Remove input sources that are not used from the display. PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/ USB / SIRIUS / HD Radio[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making Detailed Settings (Manual Setup) Setting it ems Setting cont ents Zone Rename Change the display title of each zone to one you prefer. 1 . Use ui to select the zone name (MAIN ZONE, ZONE2 or ZONE3) you want to change, then [...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Setting it ems Setting cont ents Firmware Update Update the firmware of the receiver. Check for Update : You can check for firmware updates. You can also check approximately how long it will take to complete an update. Start : E[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Make the settings related to the currently selected input source. Before displaying the menu screen, press [SOURCE SELECT] to switch to the input source to be set. The items that can be set differ according to the selected input s[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making the Input Settings (Input Setup) Setting it ems Setting cont ents HDMI Set this to change the HDMI input terminals assigned to the input sources. The DVD HDP TV SA T/CBL VCR DVR V .AUX input sources are assigned to the HDMI[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making the Input Settings (Input Setup) Setting it ems Setting cont ents iPod dock Assign the control dock for iPod input. The control dock for iPod can be assigned to the CD DVD HDP TV SA T/CBL VCR DVR V .AUX input sources. Assig[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making the Input Settings (Input Setup) Setting it ems Setting cont ents i/p Scaler The input source’s resolution is converted to the resolution set at “Resolution”. This can be set when the input source is DVD HDP TV SA T/C[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making the Input Settings (Input Setup) Setting cont ents –12dB ~ +12dB ( 0dB ) The analog input level and digital input level can be adjusted independently for input sources for which “HDMI” or “Digital” is assigned at [...]

0 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making the Input Settings (Input Setup) Setting it ems Setting cont ents A1 ~ G8 Set the preset channels that you do not want to display. This can be set when the input source is SIRIUS HD Radio . ON : Display the selected preset ch[...]

 Getting Star ted Connections Pla yback Remot e Control Multi-z one Infor mation T roubleshooting Specifications Making the Input Settings (Input Setup) Setting it ems Setting cont ents Lock Setting Set the channel radio reception limits. 1 . Press ui to select “Lock Setting”, and then press p or ENTER . 2 . Pressing uio p , input the pa[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Playback Playing Components The following describes the procedure for playing Blu-ray disc player / DVD player. Use the same procedure to play other components. Playing a Blu-ray Disc Player/DVD Player 1 Playback preparation. q Tur[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Playing Components 4 Press [SEARCH] and hold it down for a 2 seconds or more to select the display mode. There are two modes for display the contents recorded on the iPod. Browse mode : This is the mode for displaying the iPod info[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications SIRIUS XM Radio Legal SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. SIRIUS and XM[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications The channel switches continuously when [TUNING] is pressed and held. The song title, artist name, composer name, category and reception level can be checked by pressing <STATUS> . The time (default : 30 sec) for which the GUI[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Tuning in Radio Stations – SIRIUS Satellite Radio “UPDATING” is displayed while the encording code is being updated. “SIRIUS UPDATING” is displayed when updating SIRIUS tuner firmware. Refer to “Troubleshootin[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Tuning in Radio Stations – HD Radio Playback If the desired station cannot be tuned in with auto tuning, tune it in manually. When tuning in stations manually, press and hold [TUNING] to change frequencies continuously. [...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications This procedure can be used to play Internet radio stations or music or still picture (JPEG) files stored on a computer or USB memory device. Playing Network Audio, USB Memory Devices About the Internet Radio Function Internet radi[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Album Art Function When an MP3 music file includes album art data, the album art can be displayed while playing the file. Slide Show Function Still picture (JPEG) files stored on USB memory devices can be played as slide shows. [...]

0 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Playing Network Audio, USB Memory Devices Listening to Internet Radio 1 Playback preparation. q Check the network environment, then turn on the AVR- 3310CI’s power ( v page 23 “Connecting to a Home Network (LAN)”). w If setting[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications After pressing [SHIFT] , press [CHANNEL] to select the registered preset number. The AVR-3310CI automatically connects to the Internet and playback begins. Listening to Preset Internet Radio Stations Playing Network Audio, USB Memo[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications 1 Playback preparation. q Check the network environment, then turn on the AVR- 3310CI’s power ( v page 23 “Connecting to a Home Network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 38). e Pr[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications By default, the front panel’s USB port will be used. Depending on the size of the still picture (JPEG) file, some time may be required for the file to be displayed. During playback of still picture (JPEG) files, the files can[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Registering Tracks in My Napster Library Listening to Tracks Registered In My Napster Library n 1 Press p while the track you wish to register is playing. 2 Select “Add to my library”, then press ENTER or p . The track is enter[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications 5 After inputting the “Username” and “Password”, select “OK”, then press ENTER . If the “Username” and “Password” match, the top menu for Rhapsody is displayed. Username : [Input characters] G Lower case charact[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Listening to Rhapsody 1 Use ui to select “Rhapsody Channels”, then press ENTER or p . 2 Use ui to select radio station, then press ENTER , p or [ 1 ] . Track Menu 1 Use ui to select “My Library”, then press ENTER or p . 2 U[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications To Stop During playback, either press and hold ENTER or press [ 2 ] . Stopping Playback Temporarily During playback, press ENTER , [ 3 ] or [ 1 / 3 ] on the sub remote control unit. Press again to resume playback. Fast-forwarding o[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Searching Pages Press [SEARCH] , then press o (previous page) or p (next page). To cancel, press ui or [SEARCH] . b Searching by First Letter When the menu screen is displayed, press [SEARCH] twice, then press o p to select the [...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Surround Playback of 2-channel Sources q The mode switches as shown below each time STANDARD is pressed. n DOLBY PL g z DOLBY PL g x DOLBY PL g DTS NEO:6 : The signals are decoded in DOLBY PL g z for playback. : The signal[...]

0 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications Selecting the Surround Mode (Surround Mode) The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround modes. 1 Playing the source ( v page 52). 2 Select the s[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Setting items Setting contents Surround Parameters Adjust surround sound parameters. Mode : Set the play modes for the different surround modes. In the PL g x or PL g mode Cinema : Surround sound mode optimized for movie sources. M[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting it ems Setting cont ents Surround Parameters (Continued) Front Height : Set the front height channel. ON : Use the front height channel. OFF : Do not use the fron[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Audyssey Settings Set MultEQ, Dynamic EQ and Dynamic Volume. NOTE If you have not performed Auto Setup, or if you change the speaker settin[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Adjusting the Sound and Picture Quality (Audio/Video Adjust) See overleaf Playback Setting it ems Setting cont ents Audyssey Settings (Continued) Dynamic Volume : Solves the problem of large variations in volume level between TV, m[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting it ems Setting cont ents RESTORER (Continued) About the RESTORER function • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduc[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Setting it ems Setting cont ents Quick Select Shows information about “Saving Frequently Used Settings (Quick Select Function)” ( v page 80) settings. Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select / ZONE[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Other Operations and Convenient Functions <ZONE2/3 / REC SELECT> <SOURCE SELECT> Button located on both the main unit and the remote control unit BU T TO N Button only on the main unit <B U TT O N > Button only on[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications When you make an HDMI connection with a TV or player compatible with AVR-3310CI and HDMI control functions, you can perform the following operations by setting the HDMI control function of each device. When you want to listen to TV[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications Adjusting the Volume of Groups of Speakers (Fader Function) This function lets you adjust (fade) the sound from all the front (Front speaker / Front height speaker / Center speaker) or rear (Surround speaker / Surround back speaker[...]

0 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications G Quick Select Defaults H Input Source Volume Quick Select 1 DVD –40dB Quick Select 2 SAT/CBL –40dB Quick Select 3 VCR –40dB Naming Quick Select settings See “Quick Select Name” ( v page 42). n NO TE Input sources stored wi[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications “ ” is displayed on the GUI screen while the mobile terminal device is being operated. For the various settings and operating procedures, see the operating instructions of the mobile terminal devices being used. When selecting [...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications 4 When the top menu is displayed, click on the menu you want to operate. z 2: Click when you operate each zone ( vG Example 1 H ) z 3: Click when you operate the setup menu ( vG Example 2 H ) z 4: Click to change the Web control sc[...]

 Getting Star ted Connections Settings Remote Contr ol Multi-zone Infor mation T r oubleshooting Specifications G Example 2 H Setup menu screen z 10: Click the menu from which you want to make settings. The display on the right becomes each setting screen. z 11: Click “SAVE” when you want to save settings, and click “LOAD” when you w[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Infor mation T roubleshooting Specifications Playing in ZONE2/ZONE3 (Multi-zone Function) This function allows you to play sound in rooms other than the main zone where multi-channel sound is played. Connecting and Setting the Speakers Amp Assign mode setting ( v page 34) and t[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Infor mation T roubleshooting Specifications The operating procedure is the same for “ q Zone Playback by Speaker Output” and “ w Zone Playback by Audio Output (PRE OUT)”. Playback 1 Press <POWER> . 2 Turn on the zone power. Operation on the main unit Press <ZO[...]

 Getting Star ted Connections Settings Playbac k Infor mation T roubleshooting Specifications It is also possible to save three settings for multi-zone. G Quick Select Defaults H Input Source Volume Z2/Z3 Quick Select 1 DVD –40dB Z2/Z3 Quick Select 2 SAT/CBL –40dB Z2/Z3 Quick Select 3 VCR –40dB 1 Set the items below to the settings you[...]

 Getting Star ted Connections Settings Playbac k Multi-zone Information T r oubleshooting Specifications Remote Contr ol NO TE Depending on the model and year of manuf acture, this function cannot be used for some models, ev en if they are of makes listed in the list of preset codes. 1 Switch [DEVICE SELECT 1] . MAIN/TV : T o operate the TV [...]

 Getting Star ted Connections Settings Playbac k Multi-zone Information T r oubleshooting Specifications Operating the Main Remote Control Unit Remote Contr ol Fr ont DEVICE SELECT ON/SOURCE Power on / Standby 1 Play z 3 Pause z 2 Stop z 6 7 Manual search z (fast-reverse / fast-forward) CH + – Switch channels (+, –) z TV INPUT Switching [...]

 Getting Star ted Connections Settings Playbac k Multi-zone Information T r oubleshooting Specifications Operating the Main Remote Control Unit Remote Contr ol Satellit e r eceiv er/Cable TV Fr ont DEVICE SELECT ON/SOURCE Power on / Standby 1 Play z 3 Pause z 2 Stop z 6 7 Manual search z (fast-reverse / fast-forward) CH + – Switch channels[...]

0 Getting Star ted Connections Settings Playbac k Multi-zone Information T r oubleshooting Specifications The Blu-ray disc Player/D VD player , Digital Video recorder , video dec k, or CD pla yer can be operated as described belo w e v en when [DEVICE SELECT 2] is set to the “S A T/CBL ” or “TV” position. • Play ( 1 ) • Stop ( 2 ) ?[...]

 Getting Star ted Connections Settings Playbac k Multi-zone Information T r oubleshooting Specifications Operating the Sub Remote Control Unit uio p [USB] [RANDOM] [ALL MUSIC/ FA VORITES] [MENU] [M. ZONE CALL] [ZONE OFF] [ADV ANCED SETUP] [ZONE SELECT] [INPUT SOURCE SELECT] [ZONE ON] [VOLUME +, – ] [ MEMORY ] [ ENTER ] [ RETURN ] [SEARCH] [...]

 Getting Star ted Connections Settings Playbac k Multi-zone Information T r oubleshooting Specifications Switching Zones Setting the Zone for Which the Sub Remote Control Unit is Used (ZONE SELECT LOCK Mode) 1 Press [ZONE SELECT] . The currently selected multi-zone indicator lights. 2 While the multi-zone indicator is light, press [ZONE SELE[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Other Information The AVR-3310CI is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Digital Dolby Digital is a[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Explanation of Terms DTS 96/24 DTS 96/24 is a digital audio format enabling high sound quality playback in 5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization on DVD-Video. Manufactured under license under U.S. Pat[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Surround Mode Signals and adjustabilit y in the dif f erent modes Channel output Parameter (def ault values are sho wn in parentheses) F ront L/R Center Surround L/R Surround Bac k L/R Subwoof er F ront Height L/R D . COMP z 1 DRC z 2 [...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Surround Surround Mode Signals and adjustabilit y in the dif f erent modes Parameter (def ault values are sho wn in parentheses) Delay Time Subw oof er F ront Height PRO LO GIC g / g x MUSIC mode only NEO:6 MUSIC mode only EXT . IN onl[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Surround F : Mode selectable in initial st atus D : Mode fixed when “ AFDM” is “ ON” S : Selectable mode A : Non-selectable mode NO TE : z 1: This mode is not av ailable when the surround bac k speak er setup is set to “None[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Surround F : Mode selectable in initial st atus S : Selectable mode A : Non-selectable mode NO TE : z 1: This mode is not av ailable when the surround bac k speak er setup is set to “None ” . z 2: This mode is not av ailable when t[...]

 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone T roubleshooting Specifications Relationship Betw een Video Signals and Monitor Output ZONE2 MONITOR OUT INPUT OUTPUT S-VIDEO VIDEO VIDEO A A A A S VIDEO S A S-VIDEO S S S-VIDEO Infor mation The main zone video conversion function is compatible with the following for[...]

00 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation Specifications If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly[...]

0 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation Specifications G Video H Sympt om Cause / Counter measur e Pag e No sound is produced from center speaker . When playing monaural audio sources, select a surround mode other than “STANDARD” (Dolby/DTS Surround). • 69 No sound is produced from surr[...]

0 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation Specifications Sympt om Cause / Counter measur e Pag e When a USB memor y device is connected, “USB” is not display ed on the GUI menu. • The set cannot recogniz e a USB memor y de vice. Chec k the connection. • A USB memor y device not conformi[...]

0 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation Specifications Sympt om Cause / Counter measur e Pag e “CHECK SIRIUS TUNER” is display ed. • The SiriusConnect Home T uner unit is not connected. Chec k that the connections are correct. 1 9 ” ANTENNA ERROR” is display ed. • The antenna is n[...]

0 Getting Star ted Connections Settings Playbac k Remote Contr ol Multi-zone Infor mation T roubleshooting Specifications n HD Radio section [FM] [AM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 1 0 -15 W) Receiving Range: 87 .5 MHz ~ 1 07 .9 MHz 530 kHz ~ 1 71 0 kHz Usable Sensitivity: 1 .5 µV (14.8 dBf) 20 µV S/N (IHF-A): MONO 78 dB STEREO 68 [...]

PRESET CODE  DEVICE SELECT : TV T elevision 3M 100 A Addison 163 Admiral 033, 044, 050, 141 Advent 130 Adventura 041 Aiko 138 Akai 018, 019, 034, 119, 137, 151 Albatron 127, 131 Alleron 039 America Action 139 Ampro 129 Amtron 038 Anam 139 Anam National 035, 038 AOC 030, 036, 079, 137 151, 154 Apex 048, 062 Apex Digital 174 Audiovox 038, 067, 071[...]

PRESET CODE  T elefunken 019 TMK 012 T oshiba 003, 004, 005, 006, 030, 051, 156, 177 T otevision 153 T rutech 091 T untex 158, 163 TVS 050, 141 U US Logic 090 V V ector Research 137, 151 Vidikron 155 Vidtech 012, 030, 036 Viewsonic 061, 076, 142 Viking 041 Viore 115 Vizio 061, 093, 094, 095, 126, 144 W Wards 010, 012, 030, 033, 036, 039, 137, 15[...]

PRESET CODE  I iBUYPOWER 035 J JVC 063, 076 L Linksys 035 M Media Center PC 035 Microsoft 035 Mind 035 N Niveus Media 035 Northgate 035 P Panasonic 070 Philips 063, 065, 066, 067, 068, 072 Proscan 077 R RCA 063, 065, 072, 077 ReplayTV 069 S Samsung 065, 067, 072 Sonic Blue 069 Sony 035, 064, 074, 078 Stack 035 Systemax 035 T T agar Systems 035 T[...]

PRESET CODE  Pansat 100 Paysat 073 PCT 111 Philco 107 Philips 060, 067, 068, 070, 072, 073, 090 Pioneer 060 Primestar 082 Proscan 056, 057 Proton 118 R RadioShack 117 RCA 056, 057, 058, 070, 076, 086, 087, 088, 089, 092 Realistic 080 S Samsung 060, 062, 069, 070, 071, 094 Sharp 098 Sony 059, 066, 116 Star Choice 117 STS 085 T T ivax 109 T ivo 06[...]

D&M Holdings Inc. Printed in China 5411 10342 003DA www.denon.com[...]