Denon AVR-5800 manuel d'utilisation

A V SURROUND RECEIVER A VR-5800 OPERA TING INSTRUCTIONS MASTER VOLUME REMOTE SENSOR ON / STANDBY INPUT SELECTOR HOME THX CINEMA PURE DIRECT VOLUME LEVEL AL24 RF LOCK DIGITAL AUTO PCM DTS INPUTSIGNAL INPUT MODE TUNER DVD VDP TV DBS / SAT VCR-1 VCR-2 VCR-3 V. AUX CDR / TAPE-1 MD / TAPE-2 PHONO CD SURROUND SPEAKER B A SURROUND BACK CH OUTPUT SIGNAL DE[...]

2 2 SAFETY PRECAUTIONS 2 NOTE ON USE / OBSERV A TIONS RELA TIVES A L ’UTILISA TION • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Eviter des températures élevées. T enir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Handle the power cord carefull[...]

3 SAFETY INSTRUCTIONS 1 . Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to[...]

4 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON A VR-5800 Digital Surround A / V receiver . This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is pro[...]

5 3 CAUTIONS ON HANDLING 4 FEA TURES • Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PRE OUT jacks an[...]

6 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely . Incomplete connections will result in the generation of noise. • Use the AC OUTLETS for audio equipment only. Do not use them for [...]

7 Connecting video components • T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in picture quality . • When making connections, also refer to the operating instructions of the other components. CONPONENT VIDEO R L R L R L R L SPEAKER SYSTEMS SPEAKER IMPEDANCE FRONT[...]

8 Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other . • Precaution when using S-jacks This unit’ s S-jacks (input and o[...]

9 Connecting a Video Component Equipped with Color Difference (Component - Y , R-Y , B-Y) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video outp[...]

10 1 4 2 3 Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION AM LOOP ANTENNA (Supplied) FM ANTENNA GROUND AM OUTDOOR ANTENNA 300 Ω /ohms TERMINALS FM ANTENNA ADAPTER (Supplied) FM INDOOR ANTENNA (Supplied) 300 Ω /ohms FEEDER CABLE 75 Ω /ohms COAXIAL CABLE F-type converter plug (attached) • When using the FM antenna attach[...]

11 Connecting the external input (EXT . IN) jacks Connecting the MUL TI SOURCE jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder , or a component with a different type of mu lti-channel decoder , such as a Super Audio DVD player , or a multi-channel SACD player , or other future multi-channel sound format [...]

12 Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( < with < , > with > ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. • When making conn[...]

13 Connections • When making connections, also refer to the operating instructions of the other components. SPEAKER SYSTEMS ANTENNA TERMINALS MUL TI ZONE SURR.-B SURR.-A CENTER CONPONENT VIDEO FRONT EFFECT / SB R R R R R R L R L R L R L SPEAKER SYSTEMS SPEAKER IMPEDANCE FRONT , CENTER, SURROUND BACK SURROUND A OR B / 6 16 Ω A + B / 8 16 Ω / 6[...]

14 6 P ART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). q Power indicator ........................................................................(32) w Power switch ...........................................................................(32) e Headphones jack (PHON[...]

15 Remote control unit • For details, refer to the separate (supplied) RC-8000 operating instructions. The USB terminal is a terminal that will be used in the future to update the microprocessor program, etc. q T ransmitter w T ouch panel e CHANNEL up/down buttons r MUTE button t USB terminal y Jog stick (PUSH ENTER) u VOL. (volume) up/down butto[...]

16 7 SETTING UP THE SYSTEM • Once all connections with other A V components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the A VR-5800’ s on-screen display function. These settings are required to set up the listening room’ s A V system centere[...]

17 • Speaker system layout Basic system layout (For a THX Surround EX system) • The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor: With the A VR-5800 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and sur[...]

18 Before setting up the system 1 Check that all the connections are correct, then turn on the main unit’ s power . 2 Either lightly press on the remote control unit’ s touch panel or press the LIGHT button to turn on the liquid crystal display . (The back light does not turn on when the touch panel is pressed.) 3 By default the liquid crystal [...]

19 Setting the type of speakers • The composition of the signals output from the different channels and the fr equency response are adjusted automatically accor ding to the combination of speakers actually being used. 2 At the System Setup Menu select “Speaker Configuration”. 3 Switch to the speaker configuration screen. 4 Set whether or not [...]

20 • Parameters Large ................Select this when using speakers that can fully reproduce low sounds of below 80 Hz. Small ................Select this when using speakers that cannot reproduce low sounds of below 80 Hz with sufficient volume. When this setting is selected, low frequencies of below 80 Hz are assigned to the subwoofer . None?[...]

21 NOTES: — Assignment of low frequency signal range — • The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency signal range of channels set to “SMALL” in the setup menu. The low frequency signal range of channels set to “LARGE” are produced from tho[...]

22 Setting the delay time • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. • The delay time can be set separately for surround speakers A and B. Preparations: Measure the distances between the listening position and the speakers (L1 to L5 on the diagram at the right). L1[...]

23 6 Set the distance between the center speaker and listening position. The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance. If “Y es” is selected for “Default”, the settings are automatically reset to the default values. Please note that the difference of [...]

24 4 Select the desired setting, then press jog stick “ENTER”. V ariable: The level can be adjusted freely using the buttons on the remote control unit (M. ZONE 1 4/5, VOLUME UP and VOLUME DOWN). -40 dB, 0 dB: The output level is fixed at the set level and the volume can no longer be adjusted. Make this setting to switch the power amplifier for[...]

25 Setting the channel level • Use this setting to adjust so that the playback level between the different channels is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit. (For details, see page 42.) • When using[...]

26 7 Select “Y es”. 8 a. If the “Auto” mode is selected: T est tones are automatically emitted from the different speakers. The test tones are emitted from the different speakers in the following order , at 4-second intervals the first time and second time around, 2-second intervals the third time around and on: Use the CURSOR buttons to ad[...]

27 Subwoofer peak limit level setting • This unit features a subwoofer peak limit control which prevents distortion and damage in the loudspeaker system by controllin g the maximum bass volume level. With this feature you may set the maximum bass level for the system. • This feature operates with or without a subwoofer in the system. 1 At the S[...]

28 CAUTION! • The master volume is set to “–30 dB” when test tones are output. • The test tones are for confirming the low frequency playback limits and are played at an extremely high level. When using a lo w output subwoofer , be very careful about irregular operations exceeding clipping by for example turning down the subwoofer’ s at[...]

29 Setting the on-screen display (OSD) • Use this to turn the on-screen display (messages other than the menu screens) on or off. 1 At the System Setup Menu select “On Screen Display”. 2 Switch to the On Screen Display screen. 3 Select “ON” or “OFF”. 4 Enter the setting. The System Setup Menu reappears. Auto tuner presets Use this to [...]

30 2 Switch to the Auto Preset Memory screen. 3 Select “Y es” for Start. “Search” flashes on the screen and searching begins. “Completed” appears once searching is completed. The display automatically switches to screen. This completes system setup. Once these settings are made, there is no need to change them unless different A V compo[...]

31 8 REMOTE CONTROL UNIT • The included remote control unit (RC-8000) can be used to operate not only the A VR-5800 but other remote control compatible DENON components as well. Furthermore, it is equipped with a function for learning the control signals of remote control units of other manufacturers, so it can also be used to operate non-DENON r[...]

32 Operating the remote control unit 1 2 Remote control unit’ s jog stick Lightly press “ENTER” to display the icons. Press the “ ” button on the icon display section to display the “A V AMP” icon. Press the “A V AMP” icon to display the page section. Move the remote control unit’ s jog stick “ENTER” left and right to displa[...]

33 Playing the input source 2 1 3 5 1 Select the input source to be played. INPUT SELECTOR (Main unit) (Remote control unit) Example: CD When the input source is selected, the input indicator lights. CD Lit 2 Select the input mode. • Selecting the analog mode Press the ANALOG button to switch to the analog input. ANALOG (Main unit) (Remote contro[...]

34 3 Select the play mode. STEREO (Main unit) (Remote control unit) Example: Stereo 4 Start playback on the selected component. • For operating instructions, refer to the component’ s manual. 5 Adjust the volume. MASTER VOLUME (Main unit) (Remote control unit) The volume level is displayed on the master volume level display . The volume can be [...]

35 3 Adjust as desired with the CONTROL knob. • T o increase the bass or treble: T urn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.) • T o decrease the bass or treble: T urn the control counter clockwise. (The bass or treble sound can be decreased to up to –12 dB in steps of 2 dB.) 4 If y[...]

36 Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/M-ZONE 2 button until “REC OUT SOURCE” appears on the set’ s display . REC / M-ZONE 2 2 Select the source you want to record appears on the set’ s display . • The indicator for the selected program source lights. FUNCTION 3 Set[...]

37 [3] Outputting a program source to an amplifier , etc., in a different room (M-ZONE 1 mode) 1 Press the M-ZONE 1 button. M-ZONE 1 2 Select the source you want to output appears on the set’ s display . FUNCTION (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components.[...]

38 Playback using the external input (EXT . IN) jacks 1 Set the external input (EXT . IN) mode. Press the EXT . IN (on the EXT . IN button on the remote control unit) to switch the external input. The playback switches as shown below each time the button is pressed. Once this is selected, the input signals connected to the FRONT -L , FRONT -R, CENT[...]

39 Playing audio sources (CDs and DVDs) The A VR-5800 is equipped with three 2-channel playback modes exclusively for music. Select the mode to suit your tastes. 1 PURE DIRECT mode In this mode, the music is played with an extremely high level of sound quality . When this mode is set, all the video-related circuits are turned off so that music sign[...]

40 Multi-source and multi-zone playback MUL TI ROOM MUSIC ENTERT AINMENT SYSTEM • When the outputs of the MUL TI SOURCE AUDIO OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed. (R efer [...]

41 [2] Multi-zone playback using the MUL TI ZONE 2 terminals The A VR-5800 is equipped with audio pre output terminals with a fixed output level (M-ZONE 2) as the MUL TI ZONE 2 output termin als. (These are not video outputs.) Settings can be made at the system setup menu so that the same source as the M-ZONE 2 pre-out terminals can be played from [...]

42 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speak ers. This adjustment can be performed with the system setup (see page 25) or from the remote control unit, as described below . • Adjusting with the remote cont[...]

43 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together . Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 MAIN UNIT : Select “F ADER” using the FUNCTION knob af[...]

44 Playing modes for different sources The A VR-5800 is equipped with many surround modes. We recommend using the surround modes as described below in order to achiev e the maximum effect for the specific signal source. • Though we recommend selecting the surround mode as described above, other surround modes can also be selected.[...]

45 [1] Playing sources recorded in Dolby Pro Logic in the Home THX Cinema surround mode 1 Select the Home THX Cinema mode. HOME THX CINEMA (Main unit) (Remote control unit) 2 Play a program source with the mark. • For operating instructions, refer to the manuals of the respective components. [2] T o play in the THX Surround EX/Home THX Cinema Sur[...]

46 Dolby Digital mode (only with digital input) and DTS Surround (only with digital input) 1 Select the input source. INPUT SELECTOR (Main unit) (Remote control unit) q Select an input source set to digital (COAXIAL/OPTICAL) (see page 28). INPUT MODE (Main unit) (Remote control unit) w Set the input mode to “AUTO”. 2 Select the Surround mode. D[...]

47 Surround parameters w CINEMA EQ. (Cinema Equalizer): The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding moti on picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Pro Logic, Dolby Digital, DTS S[...]

48 11 DENON ORIGINAL SURROUND MODES • The A VR-5800 is equipped with a built-in high performance DSP (digital signal processor) that uses digital processing to recreate sound fields artificially . Select one of the eight provided surround modes according to the program source you want to play and adjust the parameters to achieve a more real, powe[...]

49 DSP surround simulation 1 Select the surround mode for the input channel. DIRECT STEREO DOLBY SURROUND DTS SURROUND WIDE SCREEN 5CH / 7CH STEREO DSP SIMULATION SURROUND MODE (Main unit) The surround mode switches in the following order each time the DSP SIMULA TION button is pressed: 1 2 Display the surround parameter screen on the monitor . The[...]

50 T one control setting • Use the tone control setting to adjust the bass and treble as desired. 1 Display the surround parameter screen on the monitor . The screen for the selected surround mode appears. “TONE” cannot be selected in the Direct or Home THX Cinema mode. 2 Press the CURSOR/P AGE button to highlight the display , then use the j[...]

51 Surround parameters e EFFECT : This parameter turns the effect signals with multi surround mode speaker effects on and off in the WIDE SCREEN mode. When this parameter is turned off, the SBL and SBR channel signals are equivalent to the SL and SR channels, respectively . LEVEL: This parameter sets the strength of the effect signals in the WIDE S[...]

52 12 LISTENING TO THE RADIO Auto tuning 1 Set the input function to “TUNER”. INPUT SELECTOR (Main unit) (Remote control unit) 2 Watching the display , press the BAND button to select the desired band (AM or FM). 3 Press the MODE button to set the auto tuning mode. “Auto” appears on the display . 4 Press the TUNING UP or DOWN button. Automa[...]

53 Preset memory 1 Use the “Auto tuning” or “Manual tuning” operation to tune in the station to be preset in the memory . 2 Press the MEMORY button. 3 Main unit: Press the MODE SELECT button until “TUNER PRESET” appears on the set’ s display . Remote control unit: Press the SHIFT button and select the desired memory block (A to E). MO[...]

54 Recalling preset stations 1 Main unit: Watching the display , press the MODE SELECT button until “TUNER PRESET” appears on the set’ s display . Remote control unit: Watching the display , press the SHIFT button to select the preset memory block. MODE SELECT (Main unit) (Remote control unit) 2 Main unit: Watching the display , select the de[...]

55 15 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating property ? If this unit is not operating properly , check the items listed in the table below . Should t[...]

56 16 ADDITIONAL INFORMA TION Optimum surround sound for different sources There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 T ypes of multi-channel signals Dolby Digital (EX), Dolby Pro Logic, DTS (ES), high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audi[...]

57 Surround back speakers The THX Surround EX format adds new “Surround Back” (SB) channels to the conventional 5.1-channel system. This makes it easy to achieve sound positioned directly behind the listener , something that was previously difficult with sources designed for conventional m ulti surround speakers. In addition, the acoustic image[...]

58 • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation method (1). Using dipolar speakers for the surround b[...]

59 • Set the front speakers slightly wider apart than the setup for watching movies only and point them toward the listening position in order assure clear positioning of the sound. • Set the center speaker in the same positions as in example (1). • Set surround speakers A for watching movies in the positions described in example (1) or (2), [...]

60 Surround The A VR-5800 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to ac hieve the same sense of presence as in a movie theater . Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby D[...]

61 (2) Dolby Pro Logic Dolby Pro Logic is a multi-channel signal playback system developed by Dolby Laboratories which decodes sources recorded in Dolby Surround into four channels: front left, center , front right and surround (the surround channel is monaural, but is played thro ugh two surround speakers). Here, “sources recorded in Dolby Surro[...]

62 DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expand[...]

63 Home THX Cinema surround mode THX is an exclusive set of standards and technologies established by the world-renowned film production company , Lucasfilm Ltd. THX grew from George Lucas’ personal desire to make your experience of the film soundtrack, in both movie theaters and in your home theater , as faithful as possible to what the director[...]

64 System setup items and default values (set upon shipment from the factory) System setup Default settings q w t y u i o Speaker Configuration (Surround Speaker Setting) Subwoofer mode SB CH Auto Flag Detect Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto T uner Presets Input the combination of speakers in your [...]

65 Surround modes and parameters Signals and adjustability in the different modes Channel output Parameter (default values are shown in parentheses) When playing Dolby Digital and DTS signals SB CH OUT D.COMP . E E E C C C C C C C C C C C C C C (OFF) C (OFF) E C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) E C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF)[...]

66 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Stereo (2ch driven) (All properties shown are only 170 W + 170 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) for the power amplifier stage.) 200 W + 200 W (6 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) Dynamic power: 190 W x 2 ch (8 Ω /ohms) 310 W x 2 ch (4 Ω /ohms) [...]

14-14, AKASAKA 4-CHOME, MINA TO-KU, TOKYO 107-8011, JAP AN T elephone: (03) 3584-8111 Printed in Japan 511 3624 006[...]