Denon POA-A1HDCI manuel d'utilisation

AV SURROUND PRE-AMPLIFIER AVP-A1HDCI Owner’s Manual  G raphical U ser I nterface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation ( v pag e 24) GUI Menu Map ( v page 25) Language ( v pag e 43) Remote Contr ol Unit Operations ( v pag e 73) AVPA1HDCIEU_0121.indd 1 2008/01/21 12:47:01[...]

I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence o[...]

I I • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Manipuler le cordon d’alimentat[...]

Accessories ····················································································· 3 Cautions on Handling ····································································· 3 Cau[...]

Troubleshooting ································································ 99 ~ 1 03 Specifications ······································································ 1 03, 1 04 Other Information ····?[...]

In addition to the AVP-A1HDCI, the included main remote control unit (RC-1067) can also be used to operate the equipment listed below. q DENON system components w Non-DENON system components • By setting the preset memory ( v page 73 ~ 75) • By using the learn function ( v page 7 6) q Lift the clasp and remove the rear lid. e Put the rear cover[...]

For buttons not explained here, see the page indicated in parentheses ( ). q w e r t y i o Q0 u Q1 Q2 Q3 Q4 Part Names and Functions Front Panel q Power operation button (ON/STANDBY) ····························· (56) w Power indicator ··········································?[...]

t u Q4 Q8 Q9 o i Q1 Q0 Q6 Q2 Q3 Q5 Q7 y w q e r q Input signal indicators w Input signal channel indicators These light when digital signals are input. e Information display The input source name, surround mode, setting values and other information are displayed here. r Output signal channel indicators t Surround speaker indicators These light acco[...]

q W1 i W0 W2 W3 W4 Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1 Q0 o i w e r t y u q CONTROL LINK connector ························· (11) w RS-232C connector ····································· (23) e Analog audio connectors (AUDIO) ··········· (14) r RCA PRE OUT connectors ········?[...]

q i w e r t y u o Q1 Q3 Q4 Q2 Q0 Q5 Q6 Q7 Q9 W0 W2 W5 W7 W6 W4 W3 W1 Q8 q Signal transmission indicator ··················· (73) w Mode select buttons ·································· (73) e Quick select / System call buttons ····· (72, 77) r Surround mode buttons ············?[...]

A udio cables Video cables Coaxial digital connections (Orange) Coaxial digit al (75 Ω/ohms pin-plug) cable Optical digital connections Optical cable BNC digital connections BNC (75 Ω/ohms) cable Analog connections (XLR) Balanced cable Analog connections (stereo , RCA) (White) (Red) R L R L Stereo pin-plug cable Analog connections (monaural, for [...]

G Flow of video signals for ZONE2 H • This function automatically converts various formats of video signals input to the AVP-A1HDCI into the format used to output the video signals from the AVP-A1HDCI to a monitor. • The AVP-A1HDCI’s video input/output circuitry is compatible with the following four types of video signals: Digital video signa[...]

The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor. Speaker Layout Subwoofer Center speaker Surround speakers Front speakers Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. Surround back speakers The table below shows[...]

SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA */ (R) (L) (L) (L) (R) */ */ (L) (R) (R) w q w q w q w q w q w q w q w q w q Front speaker (R) Center speaker Subwoofer 1 Subwoofer with built-in amplifier Surround speaker- B (R)[...]

With HDMI connections, the video and audio signals can be transferred with a single cable. 065 )%.* */ )%.* Compatible audio for mat Details Discs (examples) 2-c hannel linear PCM 2c h 32-192 kHz 1 6/20/24 bits CD , D VD-Video, D VD-Audio Multi-c hannel linear PCM 8c h 32-1 92 kHz 1 6/20/24 bits D VD-Audio Dolby Digital, DTS Bitstream D VD-Video DS[...]

• Connect the cables to be used ( v page 9 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable. • To output the audio signals to the monitor with HDMI connections, set GUI menu “Manual Setup” – “HDMI Setup” – “Audio” to “TV” ( v page 32). Connecting [...]

Record Player • When connecting a record player with an MC cartridge, use a commercially available MC head amplifier or a step-up transformer. • Induction humming (a booming sound) may be produced from the speakers if the volume is raised with no record player connected. • With some record players, noise may be generated when the ground wire[...]

47*%&0 065 "6%*0 7*%&0 $0.10/&/57*%&0 : 1 # 1 3 7*%&0 065 065 "6%*0 3 - 065 065 R L R L 015*$"- TV/CABLE Tuner Connect the cables to be used. TV tuner • When using a coaxial digital cable or a BNC cable for the digital audio connection, make the settings at GUI menu “Source Select” – “TV/CBL” –[...]

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connecting the Recording Components Digital Video Recorder Connect the cables to be used. R L R L R L R L 47*%&0 47*%&0 */ 3 - 3 - */ */ "6%*0 "6%*0 7*%&0 7*%&0 */ 065 015*$"- 015*$"- 06[...]

R L R L R L R L 47*%&0 47*%&0 */ 3 - 3 - */ */ 065 "6%*0 "6%*0 7*%&0 7*%&0 */ 065 015*$"- 015*$"- 065 "6%*0 "6%*0 7*%&0 7*%&0 065 065 )%.* Video Cassette Recorder Connect the cables to be used. Video cassette recorder • When recording to a VCR, it is necessary that the type of cable u[...]

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connections to Other Devices %&/0/-*/, "6%*0 Components Equipped with a DENON LINK connector Multi-channel playback is possible with DVD-Audio discs, Super Audio CD, etc. DVD player To use with DENON LINK connections, m[...]

USB Port • In the initial status, USB memory devices can be used by connecting them to the USB port on the front panel. • To change the port to be used, see “USB Select” on page 47 . • For instructions on playing the files on a USB memory device, see page 67 , 68. NO TE • Set to the USB port you want to use. • The AVP-A1HDCI is equip[...]

Antenna terminals An F-type FM antenna cable plug can be connected directly. AM/FM Direction of broadcasting station AM loop antenna (small, supplied) FM antenna 75 Ω/ohms Coaxial cable FM indoor antenna (supplied) Ground AM outdoor antenna Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to [...]

Network Audio [Wired LAN] [Wireless LAN] To WAN side Internet Router Computer To LAN port To LAN port To WAN side Internet Modem Router with access point Computer LAN port/Ethernet connector Rod antenna (supplied) Modem Required system n Broadband Internet connection A bro adba nd line connect ion to the Inte rnet is require d in order to use the A[...]

Multi Zone ZONE2 or ZONE3 Pre-out Connections • If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 or ZONE3 pre-out (variable or fixed level) connectors can be used to play a different program source in ZONE2 or ZONE3 the same time ( v page 82, 83). • To the monitor output of ZONE2, various formats of video[...]

NO TE • Insert the AC plugs securely. Incomplete connections could cause noise. • Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or anything other than audio equipment. In addition, do not connect audio devices such as high electricity consumption power amplifiers (e.g. POA-A1HDCI). Wait unti[...]

Auto Setup Optimize settings for speakers in use. Some typical examples are described below. AUTO SETUP 1 2 3 4 5 Start RETURN Pre-out Assign XLR Out Polarity Config. 9.1 SW 1SP STEP1 Speaker Detection Please place the microphone at ear height at main listening position. Start Auto Setup Enter Cancel Selected item name List of subsequent items Guid[...]

GUI Menu Map Parameter ( v page 50 ~ 54) Information ( v page 54, 55) n Status • MAIN ZONE • ZONE2/3/4 n Audio Input Signal n HDMI Information n Auto Surround Mode n Quick Select n Preset Station n Audio • Surround Parameters · Mode · Decoder · Cinema EQ · DRC · D.COMP · LFE · Center Image · Panorama · Dimension · Center Width · De[...]

* M * M Example q Example w ( :Measuring positions) • Audyssey MultEQ ® XT automatically measures the acoustical problems in the listening environment to create the best audio experience for your home theater. • It optimizes a large listening area where one or more listeners are seated. Measurements are performed by placing the calibrated micr[...]

Confi guration The speaker system to be measured can be selected ahead of time here. [Selectable items] 9.1 z 1 7.1 z 1 5.1 z 1 9.2 z 2 7.2 z 2 5.2 z 2 9.3 z 3 7.3 z 3 5.3 z 3 z 1 : This can be set when “Subwoofer” is set to “1SP”. z 2 : This can be set when “Subwoofer” is set to “2SP L/R” or “2SP MIX”. z 3 : This can be set wh[...]

Error Messages If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over again. Er ror messag es (examples) Cause Measures No microphone o[...]

Make detailed settings for various parameters Speaker Setup Use this procedure to set the speakers manually or if you wish to change the settings made with the auto setup procedure . F Menu tree F Manual Setup Speak er Setup a Speaker Confi guration s Subwoof er Setup d Distance f Channel Level g Crossov er Fr equency h THX Audio Set up j Surr oun[...]

Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 0.0ft ~ 60.0ft : Display when “Feet” is set. 0.00m ~ 18.00m : Display when “Meters” is set. Mode Select test tone playback method. [Selectable items] Auto Manual f Channel Level Adjust channel leve[...]

j Surround Speaker Select surround speakers to use for each surround mode. Operating from the main remote control unit Press the SPKR button. Surround A Surround B Surround A+B h THX Audio Setup Set the speaker to play the optimal THX surround mode. THX Ultra2 Subwoofer Set when using a subwoofer compatible with THX Ultra2 standards or a subwoofer [...]

HDMI Setup Make settings for HDMI video/audio output. F Menu tree F Manual Setup HDMI Setup a Color Space s RGB Range d Aut o Lip S ync f Audio g Monitor Out h HDMI Control a Color Space Make settings for output color space. [Selectable items] YCbCr RGB When connected to a monitor with a DVI-D connector (HDCP compatible) using an HDMI/DVI converter[...]

a EXT. IN Setup Setup playback method for analog signals inputted from external input connectors (EXT. IN). Audio Setup Make settings for audio playback. F Menu tree F Manual Setup A udio Setup a EXT .IN Setup s 2ch Direct/St er eo d Downmix Option f Aut o Sur r ound Mode g Manual EQ s 2ch Direct/Stereo Make speaker settings for 2-channel mode play[...]

d Downmix Option Set dyn amic ra nge for dow nmi x pl ayb ack of Dolb y D igit al sour ces . [Selectable items] ON OFF • Set this to “ON” if the sound from the front speakers seems distorted. • When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers. f Auto Surround Mode Ma[...]

Network Setup Make network settings. F Menu tree F Manual Setup Networ k Setup a Networ k Setup s Other d Networ k Infor mation a Network Setup Make settings for wired or wireless LAN. Wired LAN settings Make settings for wired LAN. If a Ethernet cable is connected To a cq ui re t he I P ad dr es s au to ma ti ca ll y us in g th e DH CP fu nc ti on[...]

z : This is the fl ow for infrastructure type communications. For ad-hoc communications, set “Mode” at the “Detail” settings to “Ad-hoc”. Wireless LAN settings Make settings for wireless LAN. The mode automatically switches to “Wireless”. If no Ethernet cable is connected Turn on the AVP-A1HDCI’s power. Display GUI menu “Manual[...]

s Other Make setting for amp power save mode and computer language environment. Power Saving Make setting for power saving when not connected to network. [Selectable items] ON OFF PC Language Select computer environment language. [Selectable items] ara chi (smpl) chi (trad) cze dan dut eng fi n fre ger gre heb hun ita jpn kor nor pol por por (BR) [...]

d OSD Set ZONE2 monitor as onscreen display Zone. [Selectable items] ZONE2 : Display only ZONE2 operations. ZONE2/ZONE3 : Display ZONE2 and ZONE3 operations. NO TE On-screen display appears only on the ZONE2 monitor.It does not appear on the ZONE3 monitor. Power On Level Defi ne the volume setting that is active when the power is turned on. [Selec[...]

Setting “Free Assign” allows you to freely assign each pre-out to any channel, depending on the environment used. [Selectable items] Normal Free Assign a Pre-out Assign Change the pre-out assignment. • Channels that are set up in the GUI menu “Speaker Setup”-“Speaker Configuration” to “None” can be set up, but will not generate o[...]

g Source Delete Remove input sources that are not used from the display. [Selectable items] ON Delete NO TE • Input sources being used in the various zones cannot be deleted. • Input sources set to “Delete” cannot be selected from GUI menu “Source Select” or using the SOURCE SELECT knob on the main unit or SOURCE SELECT button on the re[...]

k Trigger Out 1 Select the conditions to turn on the trigger out 1 with respect to the zone, input source, surround mode, HDMI monitor, etc. For details about the trigger out function, see page 23. l Trigger Out 2 This sets the conditions to turn on the trigger out 2, in the same way as “Trigger Out 1” above. A0 Trigger Out 3 This sets the cond[...]

A6 Dimmer Adjust display brightness of the receiver. Operating from the main unit Press the DIMMER button. [Selectable items] Bright Dim Dark OFF Bright Dim Dark OFF A7 Setup Lock Protect settings from inadvertent change. • When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is d[...]

Input Source Selection F Menu tree F Source Select TUNER PHONO CD D VD HDP TV/CBL SA T V CR D VR-1 D VR-2 V .AUX NET/USB XM HD Radio Language Select the language displayed on the GUI screen. F Menu tree F Manual Setup Language Use this procedure to select the input source and make the settings related to playing input sources. Source Select Operati[...]

Source Select XM a Play d Preset Skip A4 Antenna Aiming g Video h Input Mode j Rename k Source Level HD Radio a Play s Aut o Pr eset d Preset Skip f Preset Name g Video h Input Mode j Rename k Source Level z : “Play” and “Playback Mode (iPod)” are displayed for input sources for which “iPod dock” is assigned. Settings Related to Playing[...]

Operating from the main unit Press the VIDEO SELECT button, then turn the SOURCE SELECT knob until the desired picture appears. b To cancel, press the main unit’s VIDEO SELECT button, then turn the main unit’s SOURCE SELECT knob and select “SOURCE”. NO TE • It is not possible to select HDMI input signals. • When play ing HDMI video inpu[...]

Decode Mode Set the decode mode for this source. [Input source] CD DVD HDP TV/CBL SA T VCR DVR-1 DVR-2 V .AUX [Selectable items] Auto PCM DTS • This can be selected for input sources for which the GUI menu “Assign” setting is set to “HDMI” or “Digital”. • Only set “PCM” and “DTS” when playing the respective signals. j Rename[...]

A2 Playback Mode Make settings for “NET/USB” playback. [Input source] NET/USB USB Select Select USB port to use. [Selectable items] Front Rear Repeat Make settings for repeat mode. [Selectable items] All One OFF Random Make random mode settings. [Selectable items] ON OFF Direct Play Set the folder to be played using the DIRECT PLAY button on th[...]

Surround Mode HOME THX CINEMA THX surround sound mode to recreate the authentic sound of movie soundtracks. Surround Playback of 2-channel Sources [Selectable items] PL g x CINEMA PL g CINEMA Pro Logic NEO:6 CINEMA [Selectable items] HOME THX CINEMA : This mode is for decoding the input signals according to their format and playing THX surround sou[...]

Input signal Display Dolby Digital Source DOLB Y DIGIT AL (other than 2c h) / DOLB Y DIGIT AL EX DOLB Y DIGIT AL DOLB Y DIGIT AL EX DOLB Y DIGIT AL+PL g x CINEMA DOLB Y DIGIT AL+PL g x MUSIC DOLB Y DIGIT AL Plus DOLB Y DIGIT AL + DOLB Y T rueHD DOLB Y T rueHD DTS Surround Source DTS (5.1c h) / DTS-ES Discrete 6.1 / DTS-ES Matrix 6.1 / DTS 96/24 DTS[...]

For details, see page 92. • To cancel, press the PURE DIRECT button on the main unit or the PURE button on the main remote control unit. • When in the PURE DIRECT mode, the GUI screen is not displayed and the display on the main unit is turned off. • If the HDMI input connector is selected, video outputs are output in the PURE DIRECT mode. ?[...]

DRC Compress dynamic range (difference between loud and soft sounds). [Selectable items] Auto Low Middle High OFF This can be set in the Dolby TrueHD mode. D.COMP Compress dynamic range (difference between loud and soft sounds). [Selectable items] OFF Low Middle High When playing DTS sources, this is only displayed for compatible software. LFE Adju[...]

Subwoofer Att. Attenuate subwoofer level when using EXT. IN input. [Selectable items] ON OFF Set this to “ON” if the subwoofer channel level seems too high when playing Super Audio CD. Subwoofer Turn subwoofer output on and off. [Selectable items] ON OFF Default Resets the settings to the default values. Tone Defeat Turn tone adjustments off. [[...]

About the REST ORER function • Such compressed audio formats as MP3, WMA (W indows Media Audio) and MPEG-4 AA C reduce the amount of dat a by eliminating signal components that are hard for the human ear to hear . The REST ORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original[...]

Information a MAIN ZONE Shows information about settings for MAIN ZONE. The items displayed differ according to the input source. s ZONE2/3/4 Shows information about settings for multi-zone. [Items to be checked] Select Source Name Surround Mode Input Mode Room EQ Dynamic EQ Video Select i/p Scaler Source Level Rec Select Night Mode RESTORER etc. [[...]

A ut o Sur round Mode Shows inf ormation about auto surround mode set tings. The surround mode f or whic h the last memor y function was used f or the dif f erent input signal types is displayed. F Menu tr ee F Infor mation A ut o Sur round Mode Quic k Select Shows inf ormation about “Quic k Select” settings. F Menu tr ee F Infor mation Quick S[...]

<ON/ST ANDBY> <POWER> <PHONES> SOURCE SELECT MASTER VOLUME SOURCE SELECT [POWER ON] [MUTE] [POWER OFF] MASTER VOLUME [ AMP] Playback P l a y i n g V i d e o a n d A u d i o E q u i p m e n t 1  Prepare the equipment. q Load the DVD, CD or other software in the player. ( v See the operating instructions of the respective devices[...]

Presetting Radio Stations (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1  Tune in the broadcast station you want to preset. 2  Press [MEMO] . 3  Press [A ~ G] to select the block in which the station is to be preset, then press [CHANNEL] or [1 ~ 8] to s[...]

Program Type (PTY) PTY identifies the type of RDS program. The program types and their displays are as follows: NEWS News INFOM Information SPORTS Sports TALK T alk ROCK Roc k CLS ROCK Classic roc k ADLT HIT A dult hits SOFT RCK Sof t roc k TOP 40 T op 40 COUNTRY Countr y OLDIES Oldies SOFT Sof t NOST ALGA Nostalgia J AZZ Jazz CLASSICL Classical R[...]

[SEARCH] [NUMBER] [ d f ] uiop ENTER [SA T TU] (AMP mode) [ TU] [SEARCH] [CHANNEL] [TUNER] op [ TU] 1  Either turn <SOURCE SELECT> or press [TUNER] (AMP mode) to select “TUNER”. 2  To operate using the main remote control unit, set the remote control unit to the TUNER ( ) mode. ( v page 73 “Remote Control Unit Operations”) 3 [...]

Note : The XM Radio ID does not use the letters “I”, “O”, “S” or “F”. Activate your XM Satellite Radio service in the U.S. online at http://activate.xmradio.com or call 1-800-XM-RADIO (1-800-967- 2346). Activate your XM Satellite Radio service in Canada online at https:// activate.xmradio.ca or call 1-877-GET-XMSR (1-877-438-9677). [...]

<SOURCE SELECT> <ON / ST ANDBY> <ST A TUS> ENTER ui p About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit [BAND] [SEARCH] [MODE] [ d f ] ui [DTU] [ NET/DTU] uip [POWER OFF] [ iPod] [iPod] [CHANN[...]

Check the HD Radio Reception Information Press <STATUS> while an HD Radio broadcast is being received. The current reception information is shown on the display. q Normal ↓ w Frequency / Signal strength ↓ e Long station name / Program and Program type ↓ r Title name / Artist name ↓ t Album name / Genre name Selecting Audio Programs An[...]

<ST A TUS> ENTER uio p uiop [SEARCH] [CHANNEL +] ENTER About the butt on names in these explanations < > : But tons on the main unit [ ] : But tons on the remote control unit Button name only: But tons on the main unit and remote control unit Viewing Still Pictur es or Videos on the iP od Photo and video data on the iP od can be viewed [...]

n USB memory devices A USB memory device can be connected to the AVP-A1HDCI’s USB port to play music and still picture (JPEG) files stored on the USB memory device. · Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on the AVP-A1HDCI. · The AVP-A1HDCI is compatible with USB memo[...]

To pause During playback, press ENTER . Press again to resume playback. To stop During the play or pause mode, press and hold ENTER . Searching up or down pages Press [SEARCH] , then press o (down) or p (up). To cancel, press ui or [SEARCH] . Searching by fi rst letter (Character search) This operation is convenient for choosing items from the men[...]

1  Press [MEMO] while the Internet radio station you want to register is playing. 2  Use ui to select “Favorites”, then press ENTER . 3  Press o to select “Yes”. The Internet radio station is registered. If you do not want to register it, press p . 1  Use ui to select “Favorites”, then press ENTER or p . 2  Use ui to sele[...]

Playing Files Stored on USB Memory Devices Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on the AVP-A1HDCI. Basic Operation 1  Make the necessary preparations. • Set the USB port to be used. 1 • Set the USB port to be used. : “S our ce S ele ct ” – “ NE T/ USB ” ?[...]

NO TE • The AVP-A1HDCI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memory devices connected to both the ports at the same time. Select the USB port you want to use at the “Source Select” – “NET/ USB” – “Playback Mode” – “USB Select” menu. • DENON will ac[...]

SOURCE SELECT INPUT MODE <ZONE2/3/4 / REC SELECT> <PHONES> INPUT MODE [ AMP] SOURCE SELECT About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Surround mode Other Operations and Functions Other Operat[...]

NO TE • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • When “DENON LINK” is assigned at the GUI menu “Assign” setting, the PCM signals, network audio signals (Internet radio, media server, USB and Rhapsody), XM signals and HD Radio signals input[...]

1  Connect the HDMI to the A VP-A1HDCI with equipment compatible with the HDMI control function. 2  Put the power on for all the equipment connected to the HDMI. 3  Check the settings for all the equipment connected to the HDMI and make HDMI a vailable to them. b Please consult the operating instructions for the connected equipment to c he[...]

1  Set the input sour ce, input mode, surr ound mode, room EQ settings and volume to the conditions y ou want to store. 2  Press and hold the desir ed QUICK SELECT . Keep pressing the but ton until the quick select indicator lights. • T o call out the set tings, press QUICK SELECT at which the desired set tings w ere stored. • The Quic k [...]

R em o t e C o n t r o l U ni t O p e r a t i o ns Main Remote Control Unit • On the main remote control unit, the display switches according to the device being operated and the mode. • In modes other than iPod, the mode switches between“ ” and “ ” each time the [MODE SELECTOR] is pressed. • In the AMP, TUNER, NET/DTU and iPod modes,[...]

[MENU] [MODE SELECTOR] [CH + / SHUFFLE], [CH – / REPEA T] [SETUP/ SEARCH] [ENTER] [RETURN] [0 ~ 9, +10] [ uiop ] [ 1 ], [ 8 9 ], [ 6 7 ], [ 3 ], [ 2 ], [SOURCE ON], [SOURCE OFF] EL Display MODE SELECTOR DVD VCR iPod Device Mode Device operated DVD (Default setting) DVD Recorder CD (Default setting) CD Recorder VCR T APE iPod 1 Playback Playback P[...]

[MENU] [CH +/–] [TV/VCR] [ENTER] [DISPLA Y] [0 ~ 9, +10] [ uiop ] [SETUP] [ 1 ], [ 8 9 ], [ 6 7 ], [ 3 ], [ 2 ], [SOURCE ON], [SOURCE OFF] [MODE SELECTOR] EL Display MODE SELECTOR TV Satellite Receiver / Cable TV Device Mode Device operated TV (HIT ACHI) TV (SONY) SA T SA T 1 Punch through Punch through Punch through Punch through 8 9 6 7 3 2 SOU[...]

Setting the Remote ID When using multiple DENON AV receivers in the same room, make this setting so that only the desired AV receiver operates. 1  Press [AMP] to set the main remote control unit to the AMP mode. 2  Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice. 3  Refer to the table a[...]

System Call Function This function lets you register a series of operations at a single button. For example, the amplifier can be turned on, the input source selected, the monitor’s power turned on, the source device’s power turned on and the play mode set all by pressing a single button. Up to 32 signals each can be registered at [SYSTEM CALL[...]

1  Press [MODE SELECTOR] for the device you want to reset. 2  Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice. 3  Press [9] , [7] and [6] , in that order. The signal transmission indicator flashes twice. 4  Press the button you want to reset twice. The signal transmission indicator [...]

S u b R e m o t e C o n t r o l U n i t O p e r a t i o n s • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations. • The sub remote control unit can also be used for multi-zone, so you can use it to control the AVP-A1HDCI from other rooms. • The operations listed be[...]

Device operated SA T TU (XM) NET / USB iPod Zone selection M Z2 Z3 Z4 M Z2 Z3 Z4 M Z2 Z3 Z4 ZONE SELECT Zone operation mode selection Zone operation mode selection Zone operation mode selection ZONE OFF P ower t urned of f ( b 1) P o wer t urned of f ( b 1) P ower t urned of f ( b 1) ZONE ON P ow er turned on ( b 1) P o wer t urned on ( b 1) P ow e[...]

[USB] [ALL MUSIC/ FA VORITES] [ZONE SELECT] [ZONE OFF] [MENU] [RANDOM] [REPEA T] [ADV ANCED SETUP] 1  Press [ZONE SELECT] . The currently selected multi-zone indicator lights. 2  While the multi-zone indicator is light, press [ZONE SELECT] to select the zone to be operated. The currently selected multi-zone indicator lights. 1  Use the tip[...]

Multi-Zone Connections and Operations Connectors for audio output Audio signals Connectors for video output ZONE2 ZONE2 PRE OU T Stereo ZONE2 VIDEO OU T , ZONE2 S-VIDEO OU T , ZONE2 COMPONENT VIDEO OU T ZONE2 OPTICAL OU T Bit-stream ZONE3 ZONE3 PRE O U T Stereo ZONE3 VIDEO OU T ZONE4 ZONE4 OPTICAL4 OU T Bit-stream – Multi-Zone Connections • For[...]

Multi-Zone Operations Turning the Power On and Off G Operation on the main unit H Press <ZONE2 ON/OFF> , <ZONE3 ON/OFF> or <ZONE4 ON/OFF> for the zone to be operated. Wh en t h e po we r t ur ns on , th e m ul ti - zo ne i n di ca to r l ig ht s o n th e d is pl a y. G Operation on the remote control unit H In the zone mode you wa[...]

Surround back speakers The THX Surround EX format adds new “Surround Back” (SB) channels to the conventional 5.1 channel system. This makes it easy to achieve sound positioned directly behind the listener, something that was previously difficult with sources designed for conventional multi surround speakers. In addition, the acoustic image ext[...]

G 2 H When not using surround back speakers Subwoofer Surround speakers Monitor Center speaker Front speakers 60° 120° Front speaker Surround speaker G As seen from above H G As seen from the side H Dolby Digital Dolby Digital is a multichannel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front chan[...]

Dolby Pro Logic g x Dolby Pro Logic g x is a further improved version of the Dolby Pro Logic g matrix decoding technology. Audio signals recorded in 2-channels are decoded to achieve a natural sound with up to 7.1-channels. There are 3 modes: “Music” suited for playing music, “Cinema” suited for playing movies, and “Game” which is optim[...]

Adaptive Decorrelation™ In a movie theater, a large number of surround speakers help create an enveloping surround sound experience, while in a home theater there are usually only two speakers. This can make the surround speakers sound like headphones that lack spaciousness and envelopment. The surround sounds will also collapse into the closest [...]

Audyssey HDCD ® is an encoding/decoding technology that greatly reduces the distortion that occurs upon digital recording while maintaining compatibility with the conventional CD format, thus expanding the dynamic range and achieving a high resolution. Conventional CDs and HDCD compatible CDs are identified automatically to select the optimum dig[...]

HDMI (High-Definition Multimedia Interface) HDMI is a digital interface standard for next generation TVs based on DVI (Digital Visual Interface) standards and optimized for use in consumer equipment. Non-compressed digital video and multi-channel audio signals are transmitted with a single connection. HDMI is also compatible with HDCP (High-bandwi[...]

Surround Mode Signals and adjustabilit y in the dif f erent modes Parameter (def ault values are sho wn in parentheses) Mode Decoder Room Siz e Eff ect L ev el Delay Time Subwoof er PRO LO GIC g / g x MUSIC mode only NEO:6 MUSIC mode only EXT . IN only T one z 1 Night Mode Room EQ Dynamic EQ z 2 REST ORER Panorama Dimension Center Width Center Imag[...]

But ton Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media A udio) / MP3 / MPEG-4 AA C / FLA C DTS DOLB Y DIGIT AL D VD-A UDIO Super A udio CD Surround mode DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1c h) DTS 96/24 DOLB Y DIGIT AL EX (With Flag) DOLB Y DIGIT AL EX (With no Flag) DOLB Y DIGIT AL (5.1/5/4c h) DOLB Y DIGIT A[...]

But ton Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media A udio) / MP3 / MPEG-4 AA C / FLA C DTS DOLB Y DIGIT AL D VD-A UDIO Super A udio CD Surround mode DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1c h) DTS 96/24 DOLB Y DIGIT AL EX (With Flag) DOLB Y DIGIT AL EX (With no Flag) DOLB Y DIGIT AL (5.1/5/4c h) DOLB Y DIGIT A[...]

But ton Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media A udio) / MP3 / MPEG-4 AA C / FLA C DTS DOLB Y DIGIT AL D VD-A UDIO Super Audio CD Surround mode DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1c h) DTS 96/24 DOLB Y DIGIT AL EX (With Flag) DOLB Y DIGIT AL EX (With no Flag) DOLB Y DIGIT AL (5.1/5/4c h) DOLB Y DIGIT AL[...]

Windows Media Player ver.11 vTuner This is a free online contents server for Internet radio. Note that usage fees are included in upgrade costs. For inquiries about this service, visit the vTuner site below. vTuner website: http://www.radiodenon.com This product is protected by certain intellectual property rights of Nothing Else Matters Software a[...]

WPA (Wi-Fi Protected Access) This is a security standard established by the Wi-Fi Alliance. In addition to the conventional SSID (network name) and WEP key (network key), it also uses a user identification function and encrypting protocol for stronger security. WPA2 (Wi-Fi Protected Access 2) This is a new version of the WPA established by the Wi-[...]

Video Conv ert Input signal Monitor output Monitor output (when GUI menu displa yed) HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO ON A A A A b b z 4 z 4 z 4 z 4 A A A S b VIDEO z 1 VIDEO z 1 VIDEO z 1 z 5 VIDEO z 1 z 5 b VIDEO z 3 VIDEO z 3 VIDEO z 3 VIDEO z 3 A A S A b S-VIDEO z 1 S-VIDEO z 1 S-VIDEO z 1 S[...]

Video Convert Input signal Monitor output (Normally) Monit or output (when GUI menu displayed) HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO OFF A A A A A A A A S S S S A A A S A A A S (VIDEO) S S S S A A S A A A S (S-VIDEO) A S S S S A A S S A A S (S-VIDEO) S (VIDEO) S S S S A S A A A S (COMPONENT) A A S S [...]

Input signal Monitor output S-VIDEO VIDEO VIDEO AAA A S S (VIDEO) S A S (S-VIDEO) S S S (S-VIDEO) Video Convert S-VIDEO Monitor Out Input signal Monitor output COMPONENT S-VIDEO VIDEO COMPONENT S-VIDEO VIDEO OFF – A A A A A A – A A S A A S (VIDEO) – A S A A S (S-VIDEO) A Used A S S A S (S-VIDEO) S (VIDEO)*2 Not used A S S A – S (VIDEO) – [...]

If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this c[...]

Sympt om Cause Count er measur e P ag e No sound is produced from center speaker . • Y ou are pla ying a monaural source (TV , AM radio broadcast, etc.) in the “ST AND ARD” (Dolby/ DTS Sur round) or “HOME THX CINEMA ” mode. • The mode is set to something other than “ST AND ARD” (Dolby/ DTS Sur round) or “HOME THX CINEMA ” . 48 N[...]

Sympt om Cause Count er measur e P ag e When a USB memor y device is connected, “USB” is not display ed on the GUI menu. • The set cannot recognize a USB memor y device. • A USB memory de vice not conforming to mass storage class or MTP standards is connected. • The set port and the connected port do not matc h. • A USB memory device th[...]

Sympt om Cause Count er measur e P ag e Cannot login to Rhapsody . (“Username or Passw ord is incorrect” is display ed) • Login information is incorrect. • T rial period has expired. • Check if the Username f or Rhapsody has been properly entered. • Re-enter the Password. (Password is not display ed.) • Get a full account. www .rhapso[...]

n Audio section • Analog Input sensitivity / Input impedance: RCA Pre output (unbalanced) : 200 mV / 47 kΩ/kohms XLR Pre output (balanced) : 400 mV / 100 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode) S/N: 102 dB (IHF–A weighted, DIRECT mode) Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: RCA Pre outp[...]

n HD Radio section [FM] [AM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 1 0 -15 W) Receiving Rang e: 87 .5 MHz ~ 1 07 .9 MHz 530 kHz ~ 1 71 0 kHz Usable Sensitivity: 1 .0 µV (1 1 .2 dBf) 20 µV 50 dB Quieting Sensitivity: MONO 1 .6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) S/N (IHF -A): MONO 77 dB STEREO 72 dB HD 85 dB 85 dB T otal har monic Distor tion [...]

PRESET CODE  List of pr eset codes Denon Amp D Denon 81001, 82001, 83001, 84001 Denon T uner D Denon (Analog) 52863, 52795, 52800, 52805 Denon (XM Radio) 52864, 52812, 52813, 52814 Denon Digital T uner D Denon (NET) 62865, 62837, 62838, 62839 Denon (HD Radio) 62840, 62841, 62842, 62843 Denon iPod D Denon 72815, 72816, 72817, 72818 Cable A A-Mark[...]

PRESET CODE  T eac 40490, 40393, 40420 T echnics 40029, 40303 T echwood 40303 Thomson 40053 Thorens 40157 Thule Audio 40157 T okai 40420 U Universum 40157, 40053 V Victor 40072 W Wadia 40393 Wards 40000, 40032, 40157, 40053, 40087, 40179 Y Y amaha 40490, 40868, 40032, 40036 Y orx 40000 CD Recorder D Denon 40766, 42868 J JVC 40072 R RCA 40053, 40[...]

Eurocrypt 00455 EuroLine 01251 Europa 00863 Europhon 00299 Eurosky 00262, 00299 Eurostar 00818 Eutelsat 00713 Expressvu 00775, 01775 F Fenner 00713 Ferguson 00455, 01291, 01743 Finlandia 00455 Finlux 00455 Flair Mate 00713 FMD 01251, 01413, 01457 Force 01101 Fortec Star 01083 Foxtel 00455, 00497, 00795, 00879, 01162, 01176, 01356 Fracapro Planet 00[...]

Satstation 01083 Schaub Lorenz 01214 Schneider 00710, 01206, 01251 Schwaiger 00394, 00504, 00863, 01075, 01083, 01111, 01317, 01334, 01412, 01457 SCS 00299 Sedea Electronique 00125, 01206, 01283, 01626 SEG 01075, 01087, 01251, 01626 Seleco 00871 Septimo 01375 Serd 01412 Serino 00610 Servimat 01611 ServiSat 00713, 01251 Sharp 01517 Siemens 00173, 01[...]

Akashi 10009, 10860 Akiba 10037, 10218, 10455 Akira 10418 Akito 10037 Akura 10171, 10009, 10037, 10163, 10218, 10264, 10668, 10714, 11037, 11498, 11556, 11982 Alaron 10170 Alba 10009, 10036, 10037, 10073, 10163, 10218, 10352, 10370, 10371, 10418, 10443, 10487, 10668, 10714, 11037 Albatron 10700, 10843 Alfide 10672 All-T el 10865, 11269 Alleron 100[...]

E Easy Living 11248 Eaton 10060 Ecco 10773 ECE 10037 Edison-Minerva 10487 Elbe 10037, 10217, 10218, 10362, 10610 Elcit 10163 Electroband 10000 Electrograph 11755 Electrohome 10154, 10000, 10463, 10150, 10178, 10030, 10073 Elekta 10009, 10264 Elfunk 11037, 11208 ELG 10037 Elin 10009, 10037, 10361, 10548 Elite 10037, 10218 Elta 10009, 10264 Emerald 1[...]

JVC 10054, 10093, 10463, 10053, 10030, 10070, 10036, 10218, 10371, 10418, 10508, 10606, 10650, 10653, 10683, 10731, 11253, 11923 K Kaige 10009, 10264, 10817 Kaisui 10009, 10037, 10217, 10218, 10455 Kambrook 10217 Kamp 10017, 10180, 10217 Kangli 10001, 10009, 10264, 10374, 10661, 10817 Kangyi 10009, 10264 Kapsch 10163, 10361 Karcher 10264, 10370, 10[...]

Panasonic 10054, 10000, 10156, 10250, 10051, 10236, 10030, 11947, 11946, 11941, 11480, 11310, 11291, 11271, 10853, 10650, 10548, 10508, 10367, 10361, 10226, 10208, 10163, 10108, 10037, 10035 Panavision 10037 Panda 10051, 10706, 10009, 10208, 10226, 10264, 10508, 10698, 10780, 10817, 10821 Pathe Cinema 10163 Pathe Marconi 10109 Pausa 10009 Paxonic 1[...]

Strong 11149, 11163 Studio Experience 10843 Stylandia 10217 Sunkai 10218, 10455, 10487, 10610, 10865 Sunstar 10009, 10037, 10264, 10371 Sunwatt 10455 Sunwood 10037 Superla 10217 Superscan 10093, 10864, 11944 Supersonic 10009, 10208, 10455, 10805 SuperT ech 10009, 10037, 10218, 10556 Supra 10178, 10009, 10374 Supreme 10000 Susumu 10218, 10287, 10335[...]

E Elfunk 11037 F Ferguson 11037 Finlux 11556 G Goodmans 10587, 11037, 11900 H Hitachi 11960 J JDV 11982 Jensen 11933 K KLH 11962 L Lenco 10587 Logik 11037 Luker 11982 Luxor 11037 M Matsui 11037 Maxim 11982 Medion 11900 Mirror 11900 N Naiko 11982 Narita 11982 P Panasonic 11941 Philips 11454, 10556, 11961 Powerpoint 10698 Prima 11933 R RCA 11948, 119[...]

S Sharp 11917 Sylvania 11944 Symphonic 11944 T T oshiba 11945 b 3 S Sharp 20807 b 4 A Akai 30899 E Emerson 30821 ESA 30821 M Magnavox 30821 P Panasonic 31362, 31462 R RCA 31132 S Sharp 30630 Superscan 30821 Sylvania 30821 Symphonic 30821 T T oshiba 31045 VCR A A-Mark 20037, 20240, 20000, 20278, 20046 ABS 21972 Admiral 20060, 20048, 20039, 20047, 20[...]

Luxor 20048, 20047, 20104, 20043, 20046, 20106, 20315 LXI 20037, 20000, 20042, 20067 M M Electronic 20037, 20240, 20000, 20038 Magnadyne 20081 Magnasonic 20037, 20240, 20000, 20278, 21278 Magnavox 20035, 20037, 20048, 20039, 20081, 20240, 20000, 20226, 20618, 20642, 21593, 21781 Magnin 20240 Magnum 20642 Manesth 20081, 20045, 20209 Marantz 20035, 2[...]

TNIX 20037 T ocom 20240 T okai 20037, 20104, 20041 T opline 20348 T oshiba 20081, 20240, 20045, 20000, 20042, 20067, 20043, 20209, 20041, 20352, 20432, 20742, 20845, 21008, 21145, 21972, 21996 T osonic 20278 T otevision 20037, 20240 T ouch 21972 T oyoda 20278 T radex 20081 T riad 20278 T rix 20037 U Uher 20240 Ultra 20045, 20278 Ultravox 20278 Unit[...]

Entivo 30503, 30539 Enzer 30784, 30770, 31228 ESA 30821, 31268 EuroLine 30675, 30788, 31115, 31233 F Fenner 30651 Ferguson 30651, 30695, 30713, 30884, 30898, 31695, 31730 Finlux 30672, 30591, 30741, 30751, 30770, 30783 Firstline 30651, 30713, 30843, 30869, 31530 Fisher 30670 Funai 30675, 30695, 31268 Fusion 30862 G Gateway 31158 GE 30522, 30815, 30[...]

Salora 30741 Sampo 30752, 31321, 31347 Samsung 30490, 30573, 30744, 30199, 30820, 30899, 31044, 31075, 31635, 31932 Sansui 30784, 30695, 30751, 30763, 30768, 31051, 31228, 31230, 31695, 31832 Sanyo 30670, 30675, 30695, 30713, 30873, 31228 Scan 30705, 30850 ScanMagic 30730, 31730 ScanSonic 31695 Schaub Lorenz 30770, 30788, 31115, 31151 Schneider 305[...]

PRESET CODE  D VD pr eset codes / Codes prér églés D VD e Model No. / Modéle numéro 32134 (def ault / déf aut) 30490 D VD-555 D VD-755 D VD-900 D VD-91 0 D VD-955 D VD-1 0 00 D VD-1 200 D VD-1 500 D VD-1 71 0 D VD-1 91 0 D VD-1 930CI D VD-2200 D VD-2800 D VD-2800 g D VD-2900 D VD-291 0 D VD-2930CI D VD-3800 D VD-391 0 D VD-3930CI D VD-5[...]

Denon Brand Company , D&M Holdings Inc. Printed in J apan 00D 51 1 4654 004 www .denon.com AVPA1HDCIEU_0121.indd 124 2008/01/21 12:50:58[...]