DigiTech 7714s manuel d'utilisation

DIG/TECH Digital Telephone System Multiline Telephone Station User’s Guide This user’s guide applies to the following telephone models (when used on Comdial Gxxxx common equipment with lxxxx or Sxxxx software cartridge Rev. 11A and later): 7714S” Rev. I and later 7714X-” Rev. I and later If you need more information, consult your &&[...]

DigiTech Station User’s Guide Introduction GCA70-280 Congratulations and thank you for using a DigiTech telephone1 Once you have seen all of the options and benefits that your new telephone offers, you will wonder how you ever did your job without it. This manual serves as a helpful guide for using all of the various functions of your new telepho[...]

Understanding the Lights on Your Telephone Next to A Line Button Next to A Direct 0 Station Select (DSS)/ Busy Lamp Field (BLF) Button Next to A Fixed Feature or Programmable Feature Button Above the ITCM Steady Steady Steady Flashing Flashing Fluttering Fluttering Winklng WlrMIg Steady off Green Red Red Orange Green Red Green Red Red with quick fl[...]

Above the HOLD BUttOtt Above the MUTE Button . Above the SPEAKER Button Uwersranamg me Lignts on Your Telephone -cont- steady steady Steady off Green Red Flashing Flashing Fluttering Fluttering Winking Red Orange Green Red Green Massage waiting has been sat Automatic station relocation has been set Mute is deactivated Called party cannot hear you I[...]

GCA70-280 Digirech Station Users G~icle Using the Speakerphone l If your telephone is equipped with a speakerphone, the speakerphone can be used for any operation in ,tiich the handset can be used by pressing the SPKR button instead of lifting the handset. You cannot use the speaker to receive a SOHVA or to originate paging. Answering Calls l To an[...]

DigiTech Station User’s Guide GCA70-280 l To respond verbally, 1. Press and hold MUTE, 2. speak into handset. l To respond non-verbally, 1. press pre-programmed button (see page 16 of this manual for further instructions on programming this function). NOTE: Announcing stafon must have LCD speakerphone. . To Block SOHVA, NOTE: You may block SOHVA [...]

GCA70-280 DigiTeoh Station User’s Guide l To access outside line using line group feature, 1. press ITCM, then dial line group access code: 9=groupl, 81 = group 2, 82 = group 3, 82 = group 4, 2. listen for outside dial tone, 3. dial number, 4. when called party answers, lift handset,. l To queue for a line group if ail lines are busy, 1. press IT[...]

DigiTech Station User’s Guide GCA70-280 l To place a call on hold at another telephone, i . while on line, press ITCM (system places call on hold), 2. dial * 90, than dial extension number of telephone to receive held call, 3. hang up handset. l To answer a call at the extension receiving held call, 1. lifthandset, 2. press ITCM and dial # 90. l [...]

GCA7C-280 DigiTech Station User’s Guide Transferring Outside Calls l To announce a call before transferring it, 1. answer outside call, 2. press TFIANSKONF (call is placed on hold), 3. dial station number, 4. upon answer, announce the call, 5. hang up the handset (call is transferred). l To transfer a call without first announcing it, 1. answer o[...]

DigiTech Station User’s Guide Using the Messaging Feature GCA70-280 NOTE: You can set system-supplied messages to be displayed at the caking LCD speakerphone. l To turn LCD messaging on 1. press ITCM, 2. dial +#02, 3. choose MSG, 4. press SPKR. l To retrieve a message, 1. observe flashing message-waiting light, (HOLD light) 2. lift handset, 3. pr[...]

GCA70-280 DigiTeoh Station User’s Guide Making a Paging Announcement l To page through an external paging amplifier (if your system provides this feature), i . lit handset, 2. press paging line select button and dial page access code (see your attendant for code) -- if paging is connected to a dedicated paging j:. port, dial ITCY 69, 3. make anno[...]

DigiTech Station User’s Guide GCA70-280 l To forward all calls to another telephone, 1. press ITCM and dial +K 5, 2. dial extension number of station to which calls are to be forwarded. l To cancel allcall forward, press ITCM and dial t 5. NOTE: For each personal call received during call forward, you will hear a ring reminder (short tone burst) [...]

Engaging Automatic Set Relocation NOTE: If this feature has been enabled by your system programmer, the mes- sage-waiting light will flash for several seconds when you corinect your telephone to another location. This means that the system Is waiting to automatically relocate your extension number and other programmed features to the new location. [...]

DigiTech Station User’s Guide GCA78280 l To store personal speed dial numbers, 1. press ITCM and dial * 4 2, 2. dial memory location (l-0). 3. press line button, or dial 1,2,3, or 4 to select line groups i- 4, or dial 0 for system to select line, 4. dial number to be stored (16 digits max.) press TAP to store hookfiash and press HOLD to store pau[...]

GCA7Cb280 ulgl 1 ecn sitatlon users tiu~aa 1 Index Answering Calls.. ................................... 5 Answering SOHVA.. 5, 6 / .............................. Automatic Call Back .............................. 12 Automatic Set Relocation.. .................... 13 Call Waittng.. ......................................... 12 Conferencing.. .......[...]

This manual has been developed by Com- dial Corporation (the ‘Company’) and is intended for the use of its customers and service personnel. The information in this manual is subject to change without notice. While every effort has been made to elimi- nate errors, the Company disclaims liability for any difftculties arising from the interpre- ta[...]