Dodge 2007 LX Charger SRT8 manuel d'utilisation

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 5 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ................................. 1 1 9 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications / Alterations .......... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 1 ▫ Ignition Key Removal ................... 1 1 ▫ Key-In-Ignition Reminder ................ 1 2 䡵 Sentry Key ............................ 1 2 ▫ Replacement Keys ...................... 1 3 ▫ Customer Key Programming .............. 1 4 ?[...]

▫ Power Door Locks ..................... 2 1 ▫ Child Protection Door Lock ............... 2 3 䡵 W indows ............................. 2 4 ▫ Power W indows ....................... 2 4 ▫ W ind Buffeting ........................ 2 7 䡵 T runk Lock And Release .................. 2 7 䡵 T runk Safety W arning .................... 2 8 ▫ T [...]

A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal The sh[...]

Exit,” under “Personal Settings (Customer Program- mable Features),” under “Electr onic V ehicle Information Center (EVIC)” in Section 4 of this manual. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. [...]

NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the V ehicle Security Alarm Indicator Light will turn on for three (3) seconds for a bulb check. If the light remains on after the bulb ch[...]

NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer . Customer Key Programming If you have two valid sentry keys, you can program new sentry keys to the system by performing the following procedur e: 1. Cut the additional Sentry Key T ransponder blank(s) to match the ignition switch lock cylin[...]

• This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation. SECURITY ALARM SYSTEM — IF EQUIPPED The V ehicle Security Alarm system monitors the vehicle doors for unauthorized entry and the ignition switch for unauthorized operation. If something triggers the alarm, the system wi[...]

• The system remains armed during tr unk entry . Press- ing the trunk button will not disarm the system. If someone enters the vehicle through the tr unk and opens any door the alarm will sound. • When the system is armed, the interior power door lock switches will not unlock the doors. The V ehicle Security Alarm system is designed to pr otect[...]

REMOTE KEYLESS ENTR Y This system allows you to lock or unlock the doors, open the trunk, or activate the panic alarm fr om distances up to about 23 feet (7 meters) using a hand held radio transmitter . The transmitter need not be pointed at the vehicle to activate the system. NOTE: Inserting the key into the ignition switch dis- ables all buttons [...]

with Remote Key Lock,” under ⬙ Personal Settings (Cus- tomer Programmable Featur es),” under “Electronic V e- hicle Information Center (EVIC)” in Section 4 of this manual. T urn Headlights On with Remote Key Unlock This feature activates the headlights for up to 90 seconds when the doors are unlocked with the transmitter . The time for th[...]

• Y ou may need to be less than 23 feet (7 meters) from the vehicle when using the transmitter to turn off the panic alarm due to the radio frequency noises emitted by the system. Programming Additional T ransmitters Refer to SENTR Y KEY “Customer Key Programming.” (See page 14 for more information.) If you do not have a programmed transmitte[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. NOTE: Changes or modificati[...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death. • Neve[...]

Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Automatic Door Locks feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pr essed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not pr eviously [...]

Child Protection Door Lock T o provide a safer envir onment for small children riding in the rear seats, the r ear doors are equipped with a child protection door lock system. T o Engage the Child Protection Door Lock 1. Open the rear door . 2. Insert the tip of the vehicle’s ignition key or alike into the child lock control and pull it upwar d. [...]

T o Disengage the Child Protection Door Lock 1. Open the rear door . 2. Insert the tip of the vehicle’s ignition key or alike into the child lock control and pull it downwar d. 3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: After disengaging the child protection door lock system, always test the door from the inside to make certain it [...]

W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death. Auto Down Feature The driver door power window switch, and some model passenger door[...]

Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. NOTE: • If the window runs into any obstacle during auto- closure, it will r everse direction and then stop. Remove the obstacle and use the window switch[...]

Reset Any time the vehicle battery is disconnected, or goes dead, the auto-up function will be disabled. T o reactivate the auto-up feature, perform the following steps after vehicle power is restor ed: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is clos[...]

The trunk lid can be r eleased from outside the vehicle by pressing the tr unk button on the Remote Keyless Entry T ransmitter two times. W ith the ignition ON, the trunk open symbol will display in the instrument cluster indicating that the trunk is open. The odometer display will reappear once the tr unk is closed. W ith the key in the lock posit[...]

OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the front and rear seat belts for the driver and all passengers, fr ont airbags for both the driver and front passenger and, if so equipped, side curtain airbags for the driver and passen- gers seated next to a window . If you w[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can in[...]

W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (ben[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. 3. S[...]

BeltAlert Programming The Enhanced W arning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by performing the following steps: NOTE: DaimlerChrysler does not recommend deacti- vating the Enhanced W arning System (BeltAlert). 1. W ith all doors closed, and the ignition switch in any position except ON or ST AR T , buckle[...]

distinctive label on the webbing. Children 12 years old and under should be properly r estrained in the rear seat whenever possible. How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt [...]

Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver’s airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove c[...]

NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deploy- ment. W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airb[...]

NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to pr ovide improved protection for the driver and fr ont passenger . Side Cur- tain Airbags also work with seat be[...]

8. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate. 9. If your vehicle has side curtain airbags do not lean against the door , airbags will inflate forcefully into the space between you and the door . 10. If the airbag system in this vehicle needs to be modified to accommodate a dis[...]

• Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side W in- dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Seatbelt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors • Driver and Front Passenger Seat Belt P[...]

W ARNING! Ignoring the AIRBAG W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away . • The Driver and Front Passenger Airbag/Inflator Units are l[...]

• The Knee Impact Bolsters help protect the knees of the driver and the front passenger , and position every- one for the best interaction with the front airbag. If A Deployment Occurs The airbag system is designed to deploy when the ACM detects a moderate-to-severe collision, to help r estrain the driver and front passenger , and then to immedia[...]

W ARNING! Deployed airbags can’t protect you in another colli- sion. Have the airbags replaced by an authorized dealer as soon as possible. Enhanced Accident Response Feature If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically . In addition, approxim[...]

Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system promptly: • The Airbag W arning Light does not come on or flickers during the 6 to 8 seconds when the[...]

treated confidentially . Confidential data will not be dis- closed by DaimlerChrysler to any third party except when: 1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2. Used in defense of litigation involving a DaimlerC[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper [...]

Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for childr en who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year . These child seats[...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat. A rearward f[...]

the child restraint using lower anchorages and upper tether straps from the child r estraint to the vehicle structur e. LA TCH-compatible child restraint systems ar e now avail- able. However , because the lower anchorages are to be introduced over a period of years, child r estraint systems having attachments for those anchorages will continue to [...]

The rear seat lower anchorages ar e round bars, located at the rear of the seat cushion wher e it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. In addition, there ar e tethe[...]

restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leav[...]

buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. If the belt still can’t be tightened, or if by pulling and pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate fr om the buckle, turn the buckle aro[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and poss[...]

CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the br eak-in and not interpreted as an indication of dif ficulty . SAFETY TIPS T ransporting Passengers[...]

If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the [...]

a collision if they have been damaged (bent retractor , torn webbing, etc. If there is any question r egarding belt or retractor condition, r eplace the belt. Airbag W arning Light The light should come on and remain on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see you a[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 6 2 ▫ Inside Day/Night Mirror ................. 6 2 ▫ Automatic Dimming Inside Mirror — If Equipped ............................ 6 2 ▫ Outside Mirrors ....................... 6 3 ▫ Exterior Mirrors Folding Featur e — If Equipped ............[...]

▫ Head Restraints ....................... 8 6 ▫ Heated Seats ......................... 8 6 ▫ Folding Rear Seat ...................... 8 8 䡵 T o Open And Close The Hood ............. 8 9 䡵 Lights ............................... 9 0 ▫ Headlight Switch ...................... 9 0 ▫ Automatic Headlights — If Equipped ........ 9 0 ▫ Hea[...]

▫ T o Accelerate For Passing ............... 1 0 2 䡵 Overhead Console ..................... 1 0 3 ▫ Courtesy/Reading Lights ................ 1 0 3 ▫ Sunglasses Storage .................... 1 0 4 䡵 Garage Door Opener (HomeLink 威 )—I f Equipped ............................ 1 0 4 ▫ Programming HomeLink ................ 1 0 5 ▫ Canadi[...]

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjusted while [...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors T o receive maximum benefit, adjust the outside mirr or(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the[...]

Power Remote-Control Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move. Use the center off position to guard against accide[...]

HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone?[...]

The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features. Refer to your cellular service pr ovider or the phone manuf[...]

Help Command If you need assistance at any prompt, or if you want to know your options are at any pr ompt, say ⬙ Help ⬙ follow- ing the voice on beep. The UConnect™ system will play all the options at any prompt if you ask for help. T o activate the UConnect™ system from idle, simply press the ’Phone’ button and follow audible pr ompts [...]

Y ou can enter any four-digit pin number . Y ou will not need to remember this pin number after the initial pairing process. • For identification purposes, you will be prompted to give the UConnect™ system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • Y ou will then be asked to give [...]

you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the UConnect™ phone- book. Refer to ⬙ Add Names to Y our UConnect™ Phonebook, ⬙ to learn how to store a name in the phonebook. • The UConnect™ system will confirm the name and then dial the corresponding phone number , which may appear in the display of[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Edit. ⬙ • Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit. • When prompted, r ecite the new phone number for the phonebook entry that you a[...]

Delete All Entries in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Erase All. ⬙ • The UConnect™ system will ask you to verify that you wish to delete all the entries from the phonebook. • After confirmation, the phonebook entries will be del[...]

Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the ’Phone’ button to place the curr ent call on hold and answer the incoming call. NOTE: The UConne[...]

established, press and hold the ’Phone’ button until you hear a double beep indicating that the two calls have been joined into one conference call. Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active ca[...]

• Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect™ language change op- eration, only the language specific 32-name phonebook is usable. The paired phone name is not language specific and usable across a[...]

NOTE: The T owing Assistance number dialed is based on the Country where the vehicle is pur chased (1-800- 528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454 for Mexico city and 1-800-712-3040 for outside Mexico city in Mexico). Please refer to the 24-Hour “T owing Assistance” cover - age details in the W arranty information booklet and on[...]

a ѧ , ⬙ you could press the ’V oice Recognition’ button and say ⬙ Pair a Phone ⬙ to select that option without having to listen to the rest of the voice pr ompt. T urning Confirmation Prompts On/Off T urning confirmation prompts of f will stop the system from confirming your choices (e.g., the UConnect™ system will not repeat a phone n[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Mute. ⬙ In order to un-mute the UConnect™ system: • Press the ’V oice Recognition’ button. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Mute-off. ⬙ Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you[...]

button and say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or “de- lete” a paired phone. Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously pair ed to the UConnect™ system that you [...]

• Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work fo[...]

• Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume. Bluetooth Communication Link Occasionally , Cellular phones have been found to lose connection to the UConnect™ system. W[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 81 3[...]

82 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 83 3[...]

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up [...]

W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat control[...]

Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support. Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjustable restraints should be [...]

ignition, you can choose from High, Of f, or Low heat settings. Amber LEDs in the top portion of each switch indicate the level of heat in use. T wo LEDs will illuminate for high, one for low , and none for off. Press the switch once to select high-level heating. Pr ess the switch a second time to select low-level heating. Press the switch a third [...]

Folding Rear Seat The rear seatbacks can be folded forwar d to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use. When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seat[...]

TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) t[...]

W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Y ou could have a collision. Be sure all hood latches are fully latched before driving. LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the hea[...]

headlights will stay ON for up to 90 seconds after you turn the ignition switch OFF . T o turn the Automatic System OFF , move the headlight switch out of the AUTO (A) position. NOTE: The engine must be running befor e the head- lights will come ON in the Automatic mode. Headlights On with Wipers (A vailable with Auto Headlights Only) When this fea[...]

If you turn the headlights, park lights, or ignition switch on again, the system will cancel the delay . If you turn the headlights off befor e the ignition, they will turn off in the normal manner . NOTE: The lights must be turned off within 45 seconds of turning the ignition off to activate this featur e The Headlight delay time is programmable. [...]

Multi-Function Lever The multi-function lever controls the operation of the turn signals, headlight beam selection, and passing lights. The lever is located on the left side of the steering column. T urn Signals Move the Multi-Function Lever up or down and the corresponding turn signal indicator in the instr ument cluster flashes to show proper ope[...]

Overhead Console Map/Reading Lights These lights are mounted between the sun visors on the overhead console. Each light is turned ON by pr essing the lens. Press the lens a second time to turn OFF the light. These lights also turn on when a door is opened, or when the unlock button on the remote keyless entry transmitter is pressed, or when the dim[...]

Dome Light Position Rotate the dimmer control completely upwar d to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer contr ol is in this position. Interior light Defeat (OFF) Rotate the dimmer control to the extr eme bottom “OFF” position. The interior lights will remain of f when the doors ar[...]

CAUTION! T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper switch is left in any position other than OFF . Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause be- tween cycles desirable. Rotate [...]

two wipe cycles after releasing the lever and then r esume the intermittent interval previously selected. If you activate the washer while the windshield wiper is turned OFF , the wipers will operate for two wipe cycles and then turn OFF . Headlights On with Wipers (A vailable with Auto Headlights Only) When this feature is active, the headlights w[...]

The fluid reservoir will hold nearly 1 gallon (4 liters) of washer fluid when the message “Low W asher Fluid” appears in the Electronic V ehicle Information Center (EVIC). W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer so[...]

outward or push it inwar d as desired. T o lock the steering column in position, push the control handle inwar d until fully engaged. W ARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked cou[...]

Press the switch r earward to move the pedals r earward (toward the driver). • The pedals can be adjusted with the ignition OFF . • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. CAUTION! Do not place any article under the adjustable pedals or imped[...]

T o Activate: Push the speed control lever inwar d (toward the steering column) and release (“ON/OFF”). The indicator light in the lever (and in the instrument cluster on some models) will illu- minate to show that the speed control system is ON. T o turn the system OFF , push the lever inward (towar d the steering column) again and release. At[...]

speed. T o do so, push the lever up and release (RES/ ACCEL), and then remove your foot fr om the accelerator pedal. T o V ary the Speed Setting: When the speed control is set, you can incr ease speed by pushing the lever up and holding (“RES/ACCEL”). When the lever is released, a new set speed will be established. Pushing the lever up and rele[...]

W ARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Y our vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery . OVERHEAD CONSOLE The overhead console[...]

Sunglasses Storage At the rear of the console, a compartment is pr ovided for the storage of a pair of sunglasses. The storage compartment access is a ⬙ push/push ⬙ design. Push the finger depression on the over head console to open. Push the finger depression to close. GARAGE DOOR OPENER (HomeLink 姞 )—I F EQUIPPED The HomeLink 威 Universa[...]

Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that you install a new battery in the hand-held transmitter of the device being programmed. This will allow for quicker training and accurate transmission of the radio-frequency signal. The Electronic V ehicle Inform[...]

2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold the HomeLink button (that you want to train) and the hand-held transmitter button. Do not release the buttons until Step 4 is complete. NOTE: Some gate operators and garage door openers may requir e you to replace t[...]

system). Please proceed to Steps 6–8 to complete the programming of a r olling code equipped device (most common garage door openers requir e this step. 6. At the garage door opener receiver (motor -head unit) in the garage, locate the ⬙ learn ⬙ or ⬙ smart ⬙ button. This can usually be found where the hanging antenna wir e is attached to [...]

successfully by HomeLink. The EVIC will display “Chan- nel X T rained” (where X is Channel 1, 2, or 3). Proceed with ⬙ Programming ⬙ Step 4 to complete the pr ocedure. Using HomeLink T o operate, simply press and r elease the programmed HomeLink button. Activation will now occur for the trained device (i.e. garage door opener , gate operato[...]

This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received including interfer ence that may cause undes- ired operation. NOTE: Changes or modifications not e[...]

W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wi[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof - Express Press and r elease the ⬙ V ⬙ b[...]

Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. Sunroof Fully Closed Press the switch forwar d and release to ensur e that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There ar e two 12-volt electrical outlets on this vehicle. Both of the outlets are pr[...]

The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cell[...]

CUP HOLDERS Front Seat Cup Holders — Standard The cup holders are located in the forwar d edge of the center console. Front Seat Cup Holders — Premium The cup holders are located in the forwar d edge of the center console. Push down on the cover as shown to expose the cup holders. Close the cover when the cup holders are no longer needed. Front[...]

Rear Seat Cup Holders The rear seat cup holders ar e located in the center armrest between the rear seats. The cup holders ar e positioned forward in the armr est and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the r ear occupants’ el- bows. STORAGE Console Features The center consol[...]

Cargo Area The 60/40 split-folding rear seat pr ovides cargo-carrying versatility . The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they pr ovide a continuous, nearly flat extension of the load floor . When the seatback is folded to the upright position, make sure it is la[...]

W ARNING! • The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. T o avoid loss of control result- ing in personal injury , follow these guidelines for loading your vehicle: • Always place cargo evenly on the car go floor . Put heavier objects as low and as far forward as possible. • P[...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel And Controls ............ 1 2 2 䡵 Premium Instr ument Cluster .............. 1 2 3 䡵 Instrument Cluster Descriptions ........... 1 2 4 䡵 Electronic V ehicle Information Center (EVIC) . 132 ▫ Electronic V ehicle Information Center (EVIC) Displays ...................... 1 3 3[...]

▫ Operation Instructions - CD Mode ......... 1 4 8 ▫ Operation Instructions - Auxiliary Mode ..... 1 4 9 ▫ Operating Instructions - Hands Fr ee Phone — If Equipped ........................... 1 5 0 ▫ Operating Instructions - Satellite Radio — If Equipped ........................... 1 5 0 䡵 Sales Code RAK – AM/FM/Cassette/CD (6-Disc)[...]

䡵 V ideo Entertainment System (Sales Code XR V) — If Equipped .......................... 1 6 6 ▫ Kicker Mobile Surround (Kms1) ........... 1 6 7 䡵 Satellite Radio — If Equipped ............. 1 6 7 ▫ System Activation ..................... 1 6 7 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) .................... 1 6 [...]

INSTRUMENT P ANEL AND CONTROLS 1 — Air Outlet 6 — Radio 1 1 — Ignition Switch 2 — Instrument Cluster 7 — Climate Control 12 — Hood Release 3 — Hazard Switch 8 — Heated Seat Switch* 13 — T runk Release Switch 4 — Electronic Stability Pr ogram Off Button* / T raction Control System Of f Button* 9 — Power Outlet 14 — Headlight [...]

PREMIUM INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 123 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Press this button to change the display fr om odometer to either of two trip odometer settings. The letter “A” or “B” will appear when in the trip odometer mode. Push in [...]

engine running, your vehicle will usually be drivable. However , see your dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is requir ed. In this case, you may experience reduced performance, an elevated/r ough idle or engine stall, and your vehicle may requir e towing. Also, have the sys[...]

9. T urn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. NOTE: A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on. NOTE: Check for a defective outside light bulb if either indicator flashes at a rapid rate. (See page 93 for more inf[...]

cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corr ected. (See page 213 for more information.) 14. Oil Pressur e W arning Light This light shows low engine oil pressur e. The light should turn on momentarily when the eng[...]

Loose Fuel Filler Cap If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC). T ighten the fuel filler cap properly and pr ess the odometer reset button to turn off the message. If the pr oblem con[...]

turn on in the event of an EBD failure. Immediate r epair of the ABS system is r equired in the event of an EBD failure. The operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should turn on for approxi- mately two seconds and then turn off. The light will remain o[...]

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to maintain correct tir e pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. The T ire Pressur e Monitoring T elltale Light will illumi- nate in the instrument[...]

functioning and service is requir ed. However , the con- ventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to [...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the speedometer . V ehicles equipped with steering wheel mounted buttons (de- scribed in this section) are also equipped with the EVIC. The EVIC consists of the foll[...]

Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being played (if so equipped), or changes the current CD track being played (if so equipped) when the EVIC is in the Compass/T emp/Audio screen. Press the SCROLL button to scr oll throug[...]

• Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph [1.6 km]) • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph [1.6 km]) • Door(s) Ajar (with a single chime if vehicle is in motion) • T runk Ajar (with a single chime) • Low W asher Fluid (with a single chime) • Chan[...]

• Elapsed T ime • Display Units of Measure in Press the SCROLL button to cycle through all the T rip Computer functions. The T rip Functions mode displays the following: • A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds[...]

• Display Units of Measure in: T o make your selection, press and r elease the FUNC- TION SELECT button until “US” or “METRIC” appears. T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the FUNCTION SELECT button once to clear the resettable function being dis- played. T o reset[...]

Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set using the following procedur e: NOTE: Magnetic materials[...]

1. T urn the ignition switch ON. 2. Press and hold the compass button for appr oximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and r elease FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and r ele[...]

The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. The EVIC displays this symbol to indicate that the UConnect™ phone is currently r oaming. The EVIC displays this symbol to indicate that you have voice mail. The EVIC displays this symbol to indicate a text message. The EVIC displays this symbol to i[...]

or Menu display on the Navigation Unit. When the Menu display is active, the SCROLL button can be used to scroll through the list, the FUNCTION SELECT button can be used to select an item, and the AUDIO MODE button can be used to return to the pr evious menu. When the Map display is active, pressing the FUNCTION SELECT but- ton will change the Navi[...]

Use the SCROLL button to display one of the following choices: “Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, Deutsch, Italiano, or Francai[...]

on lock/unlock feature. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. “Flash Lights with Remote Key Lock” When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter . This feature may be selected wit[...]

door will cancel this feature. T o make your selection, press and r elease the FUNCTION SELECT button until “Off,” “45 sec.,” “5 min.,” “10 min.,” “30 min.,” or “60 min.” appears. “Confirmation of V oice Commands” — If Equipped When ON is selected, all voice commands from the UConnect™ system are confirmed. T o make [...]

and thus remain a part of the AM reception. They interfere very little with the fr equency variations that carry the FM signal. AM Reception AM sound is based on wave amplitude, so AM r eception can be disrupted by such things as lightning, power lines and neon signs. FM Reception Because FM transmission is based on frequency varia- tions, interfer[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) i[...]

(if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button causes the tuner to scan through pr eset stations in either , AM, FM, or Satellite (if equipped) frequencies, pausing for 5 seconds at each pre[...]

Press the r otary TUNE control a thir d time and TREB will display . T urn the TUNE control to the right or left to increase or decr ease the T reble tones. Press the r otary TUNE control a fourth time and BAL will display . T urn the TUNE control to the right or left to adjust the sound level from the right or left side speakers. Press the r otary[...]

Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display . If the vol[...]

TIME Button (CD Mode) Press this button to change the display fr om elapsed CD playing time to time of day . The time of day will display for 5 seconds. R W/FF (CD Mode) Press and hold the FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . RND/SET Button (Rando[...]

second time and the sound from the speakers will r eturn. Rotating the volume control or turning OFF the ignition will also return the sound fr om the speakers. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. PSCAN Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press this button to change the [...]

SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Swi[...]

new station until you make another selection. Holding the button and will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next station, in either AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds (satellite scan 8 seconds) at each listena[...]

Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will display . T urn the TUNE control to the right or left to incr ease or decrease the Bass tones. Press the r otary TUNE control a second time and MID will display . T urn the TUNE control to the right or left to increase or decr ease the Mid Range tones. Press the r ota[...]

Country Country Oldies Oldies Soft Soft Nostalgia Nostalgia Jazz Jazz Classical Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Soft_R_&_B Foreign Language Foreign_Language Religious Music Religious_Music Religious T alk Religious_T alk Personality Personality Public Public College College Unassigned W eather W eather By press[...]

Seek Button Press the SEEK button up for the next selection on the tape and down to return to the beginning of the curr ent selection. Press the SEEK button up or down to move the track number to skip forward or backwar d 1 to 6 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. Fast Forward (FF) Press the [...]

Noise Reduction The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off. T o turn off the Dolby Noise r eduction System: Press Preset 1 after you insert the tape. The NR light in the display will go off when the Dolby System is of f. * ”Dolby” noise reduction is manufactur ed under license from Dolby Labo[...]

SCAN Button (CD MODE for CD Audio Play) Press the Scan button to scan thr ough each track on the CD currently playing. LOAD/EJECT Button (CD Mode for CD Audio Play) LOAD/EJECT - Load Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSE[...]

R W/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . TUNE Control (CD MODE for CD Audio Play) Pressing the TUNE contr ol allows the setting of the T one, Fade, and Balance. S[...]

files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats ar e not supported. The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (inc[...]

ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP3 and WMA Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contai[...]

LOAD/EJT - Eject Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. If you have ejected a disc and have not remov[...]

T urn the TUNE control to display available folders or move through available folders. Pr ess the TUNE control to select a folder . B u t t o n s1-6( C D Mode for MP3 Play) Selects disc position s1-6f o rP l ay/Load/Eject. Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Phone” in Section 3 of the Owner’s Manual. O[...]

Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America. Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Satellite Radio (If Equipped) Refer to your “Navigation User’s Manual” for detailed operating instructions[...]

5. Select DONE to exit from the clock setting mode. Pr ess ENTER to save your changes. If you press CANCEL or NA V then your changes will not be saved. User Defined Clock If you wish to set the clock to a time differ ent than the system clock, you can manually adjust the time by choosing the “User Defined Clock” option. 1. At the Clock Setup sc[...]

Audio Clock Display Select this option to change the size of the clock on the audio screens. 1. When you are at an audio scr een, quickly press the TIME button on the navigation faceplate. 2. In this example the large clock appears on the scr een. 3. T o switch the clock to the small clock, quickly press TIME again. 4. T o toggle back to the large [...]

VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-power ed remote control, and two head- sets. The system is located in the center console storage bin under the armrest lid. Refer to your VES™ User’s Manual [...]

Kicker Mobile Surround (KMS1) The VES for this vehicle comes equipped with Kicker Mobile Surround (KMS1). This featur e offers the ultimate movie experience by providing surr ound sound uniquely equalized for the interior space of your vehicle. The KMS1 activates whenever a DVD is in the VES player , and the radio mode is set to VES, and the video [...]

at www .sirius.com. Please have the following informa- tion available when activating your system: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Credit car d information. 3. Y our V ehicle Identification Number . Electronic Serial Number/Sirius Identification Number (ESN/SID) The Electronic Serial Number/Sirius Identifi[...]

Selecting Satellite Mode in REF , RAQ, and RAK Radios Selecting Satellite Mode — REF Radio Press the MODE button r epeatedly until the word ⬙ SA T ⬙ appears in the display . A CD may remain in the radio while in the Satellite radio mode. Selecting Satellite Mode — RAQ and RAK Radio Press the MODE button r epeatedly until the word ⬙ SA T ?[...]

Using the PTY (Program T ype) Button (if equipped) Follow the PTY button instr uctions that apply to your radio. PTY Button ⴖ SCAN ⴖ When the desired pr ogram type is obtained, press the ⬙ SCAN ⬙ button within five seconds. The radio will play 7 seconds of the selected channel before moving to the next channel of the selected program type. [...]

REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the 3 and 9 o’clock positions. V ehicles equipped with steering wheel mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver -interactive display . This is located in the[...]

When the EVIC is in the Compass/T emp/ Audio screen, pr ess the FUNCTION SELECT button to advance the radio to the next preset station, to change the side of the tape being played (if so equipped), or to change the cur- rent CD track being played (if so equipped). when the EVIC is in the Compass/T emp/ Audio screen, pr ess the SCROLL button to seek[...]

Press either the top or bottom of the SCROLL button twice to listen to the second track on the CD, three times to listen to the third track, and so forth. Satellite Radio Operation Press the top of the SCROLL button once to SEEK the next listenable station up from the curr ent setting. Press the bottom of the SCROLL button once to SEEK the next lis[...]

CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper , paper CD labels, or tape to the disc; avoid scratching the disc. 4. Do no[...]

Manual Air Conditioning and Heating System Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF . T emperature Control The rotary knob in the center contr ols air temperatu[...]

NOTE: T o improve fuel economy , leave in defrost only when necessary . • Defrost/Floor Air flows through the fr ont and rear floor outlets and the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles. • Floor Air flows through the floor outlets located under the instrum[...]

a second time to turn off the air conditioning. An LED in the button will illuminate when compressor operation is selected. Automatic T emperature Control — If Equipped Automatic Operation The Infrared Dual-Zone Climate Contr ol System auto- matically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver an[...]

or passenger T emperature Contr ol knob. Once the com- fort level is selected, the system will maintain that level automatically using the heating system. Should the de- sired comfort level r equire air conditioning, the system will automatically make the adjustment. Y ou will experience the greatest ef ficiency by simply allowing the system to fun[...]

Recirculation to be selected while in defr ost or defrost/floor mode. Attempting to use the recir cula- tion while in these modes will cause the LED in the control button to blink and then turn of f. Manual Operation This system offers a full complement of manual override features, which consist of Blower Pr eferred Automatic, Mode Preferr ed Autom[...]

180 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles[...]

NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. The r ecirculation mode should only be used temporarily . An LED in the button illuminates when the recir cula[...]

system lubrication to minimize the possibility of com- pressor damage when the system is started again. W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide suf ficient heating. If side win- dow fogging becom[...]

Control Setting Suggestions for V arious W eather Conditions 184 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

REAR WINDOW FEA TURES Electric Rear Window Defroster The electric Rear W indow Defroster Control is located on the climate control. Pr ess this button to turn on the rear window defr oster and the heated side mirrors (if equipped). An LED in the button will illumi- nate when the rear window defr oster is ON. The de- froster automatically turns of f[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 1 9 0 ▫ Automatic T ransmission ................ 1 9 0 ▫ Normal Starting ...................... 1 9 0 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ..................... 1 9 0 ▫ If Engine Fails T o Start ................. 1 9 1 ▫ After Starting ....[...]

䡵 Electronic Brake Contr ol System ........... 2 0 8 ▫ ABS (Anti-Lock Brake System) ............ 2 0 8 ▫ TCS (T raction Control System) ............ 2 0 8 ▫ BAS (Brake Assist System) ............... 2 0 9 ▫ ESP (Electronic Stability Program) ......... 2 0 9 ▫ Synchronizing ESP .................... 2 1 2 ▫ ESP/BAS Malfunction Indicator[...]

▫ 6.1L Engine ......................... 2 3 7 ▫ Reformulated Gasoline ................. 2 3 8 ▫ Gasoline/Oxygenate Blends .............. 2 3 8 ▫ MMT In Gasoline ..................... 2 3 8 ▫ Materials Added T o Fuel ................ 2 3 9 ▫ Fuel System Cautions .................. 2 3 9 ▫ Carbon Monoxide W arnings .............. 2 4 0 [...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or [...]

If Engine Fails T o Start If the engine fails to start after you have followed the “NORMAL ST ARTING” pr ocedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded. CAUTION! T o prevent damage to the starter , do not[...]

seconds with the accelerator pedal pushed all the way to the floor . Release the accelerator pedal and the key once the engine is running smoothly . Do not overspeed the engine. If the engine shows no sign of starting after two 15- second periods of cranking with the accelerator pedal held to the floor , the “NORMAL ST ARTING” pr ocedure should[...]

AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or [...]

The gear shifting process is continuously adapted, de- pendent on the driving style, the driving situation and the road characteristics. NOTE: • After selecting any driving position, wait a moment to allow the gear to engage fully before accelerating, especially when the engine is cold. • If there is a need to r estart the engine, be sure to cy[...]

Over T emperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly dif ferent feeling or response during normal operation in D (Drive) position. A[...]

out of the park position without pressing the brake. After operation, return the r ubber storage tray to its original position. 5 Speed Automatic T ransmission Shifting from D (Drive) to P (Park) or R (Reverse) (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on [...]

W ARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. The following indicators should be used to ensure that you have engaged the selector lever into the P (Park) position: • When shifting[...]

CAUTION! Coasting the vehicle, or driving for any other reason with selector lever in NEUTRAL can result in trans- mission damage. W ARNING! Do not coast in N (Neutral) and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. Y ou might lose control of the vehi[...]

Briefly , press the selector lever in the “D +” direction and the transmission will shift from the curr ent gear to the next higher gear . Press and hold the selector lever in the “D +” dir ection and the transmission will shift from the curr ent gear directly to gear “D.” W ARNING! On slippery road surfaces, never downshift in order to[...]

6. Move the selector lever to the desired range. If the problem is no longer detected, the transmission will return to normal operation. NOTE: Even if the transmission can be reset, we recommend that you visit a dealer at your earliest possible convenience. Y our dealer has diagnostic equip- ment to determine if the problem could r ecur . Have the [...]

• An UPSHIFT message will appear in the Electronic V ehicle Information Center (EVIC) portion of the in- strument cluster when using Autostick 威 . This message appears in order to alert the driver to upshift to the next gear . The UPSHIFT message will display while operating the vehicle at higher engine revolutions-per - minute (RPM). Y ou can [...]

DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the rear wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the rear (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is dange[...]

P ARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. W ARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. When parking on a flat surface, place t[...]

NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A chil[...]

The electronic brake for ce distribution (EBD) prevents the rear wheels fr om over-braking and pr ovides greater control of available braking for ces applied to the rear axle. When the vehicle is driven over 7 mph (1 1 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises ar e the system per- forming it[...]

W ARNING! • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to inter- ference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability . In- stallation of such equipment should be performed by qualified profe[...]

Brake Force Distribution (EBD) systems ar e not function- ing. Immediate repair to the ABS system is requir ed. POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reas[...]

ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system commonly r eferred to as ESP . This system includes the ABS (Anti-Lock Brake System), the TCS (T raction Control System), the BAS (Brake Assist System), and the ESP (Electr onic Stability Program). These systems work together to enhance both v[...]

BAS (Brake Assist System) This system complements the Anti-Lock Brake System (ABS) by optimizing the vehicle braking capability dur- ing emergency braking maneuvers. This system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressur e to the brakes. This can help reduce braking di[...]

The ESP uses sensors in the vehicle to determine the path that the driver intends to steer the vehicle and compares it to the actual path of the vehicle. When the actual path does not match the intended path, the ESP applies the brake of the appropriate wheel to assist in counteracting the condition of oversteer or understeer . • Oversteer - when[...]

Partial Of f The “Partial Off” mode is intended for times when a more spirited driving experience is desir ed. It is also intended for driving in deep snow , sand, or gravel. This mode disables the TCS portion of the ESP and raises the threshold for ESP activation, which allows for more wheel spin than what ESP normally allows. The “ESP OFF?[...]

W ARNING! In the ESP Full Off mode, the engine torque reduc- tion and stability features are cancelled. Therefore, the enhanced vehicle stability offered by ESP is unavailable. NOTE: When the ESP is switched of f a feature of the system remains active. This featur e controls wheel spin across an axle quite similarly to a limited slip dif ferential.[...]

ESP/BAS Malfunction Indicator Light and ESP/TCS Indicator Light The malfunction indicator light for the ESP is combined with the BAS indicator . The yellow “ESP/BAS Malfunction Indicator Light” and the yellow “ESP/TCS Indicator Light” in the instrument cluster both come on when the ignition switch is turned to the “ON” position. They sh[...]

NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewa[...]

EXAMPLE: 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.5 = Section W idth in Inches (in) R = Construction Code — ⬙ R ⬙ means Radial Construction. — ⬙ D ⬙ means Diagonal or Bias Construction. 15 = Rim Diameter in Inches (in) Service Description: 95 = Load Index —A numerical code associated wit[...]

EXAMPLE: C,D,E = Load range associated with the maximum load a tire can carry at a specified pr essure Maximum Load — Maximum Load indicates the maximum load this tire is designed to carry . Maximum Pressure — Maximum Pressur e indicates the maximum permissible cold tire inflation pr essure for this tire. Tire Identification Number (TIN) The TI[...]

EXAMPLE: 01 = Number repr esenting the year in which the tire was manufactur ed. (2 digits) —01 means the year 2001. —Prior to July 2000, tire manufactur ers were only r equired to have 1 number to repr esent the year in which the tire was manufactur ed. Example: 031 could repr esent the 3rd week of 1981 or 1991. Tire Loading and T ire Pressure[...]

T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the total weight your vehicle can carry 3) the tire size designed for your vehicle 4) the cold tire inflation pr essures for the fr ont, rear and spare tir es. Loading The vehicle maximum load on th[...]

Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occu- pants and cargo should never exceed XXX pounds” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and pas- sengers from XXX kil[...]

220 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabili[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as[...]

W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires W ARNING! Combining radial ply tires with other types of [...]

T read Wear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tir e [...]

Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressur e. The manu- facturer str ongly recommends that you use tir es equiva- lent to the originals in size, quality and performance when replacement is needed (r efer to the parag[...]

CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear . • Uneven tire wear , such as feathering and one-sided wear . • V ehicle pull to right or left. T ires may also cause the vehicle to pull to [...]

CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is im- portant that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain [...]

TIRE ROT A TION RECOMMENDA TIONS T ires on the front and r ear axles of vehicles operate at differ ent loads and perform differ ent steering, driving, and braking functions. For these reasons, they wear at unequal rates, and tend to develop irregular wear pat- terns. These effects can be r educed by timely rotation of tires. The benefits of rotatio[...]

Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cross” as shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recommended co[...]

• The TPM System will warn the driver of a low tire pressur e if the tire pressur e falls below the low- pressur e warning limit for any reason, including low temperature ef fects. • The TPM System will continue to warn the driver of low tire pr essure as long as the condition exists, and will not turn off until the tir e pressur e is at or abo[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. After-market wheels can cause s[...]

monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pr essure readings to the Receiver Module. NOTE: It is particularly important for you to check the tire pr essure in all of the tires on your vehicle r egularly and to maintain the proper pr essure. The TPMS consists of the following components: ?[...]

vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. Check TPMS W arning The T ire Pressur e Monitoring T elltale Light will flash on and off for 60 seconds and an audible chime will sound when a system fault is detected. The flash cycle will repeat every ten minutes, without [...]

(those flashing in the EVIC graphic) to the vehicle’s recommended cold placar d pressur e value. Once the system receives the updated tir e pressur es, the system will automatically update, the graphic display in the EVIC will stop flashing, and the T ire Pressur e Monitoring T elltale Light will turn off. The vehicle may need to be driven for up[...]

active road tir es. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning The T ire Pressur e Monitoring T elltale Light will flash on and off for 60 seconds and an audible chime will sound when a system fault is detected. The flash cycle will repeat ever[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. The tire pr essure sensors [...]

vehicle. The manufacturer r ecommends the use of gaso- lines that meet the WWFC specifications if they are available. Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “Reformulated Gasoline”. Reformulated gasolines contain oxygenates, and are spe- cifically blended to reduce vehicle em[...]

content of gasoline may not be indicated on the pump, you should ask your gasoline retailer if his/her gasoline contains MMT . It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than allowed in the United States. MMT is pro- hibited in Federal and California reformulated gasolines. Materi[...]

Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehi[...]

NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. Fuel Filler Door Gas Cap T ether Hook ST ARTING AND OPERA TING 241 5[...]

CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light to turn on. • T o avoid fuel spillage and overfilling, do not ?[...]

Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC). If this occurs, tighten the fuel filler cap properly and pr ess the odometer reset button to turn off the messa[...]

• Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the V ehicle Identification Number (VIN). Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle W[...]

driving. If weighing the loaded vehicle shows that you have exceeded either GA WR, but the total load is within the specified GVWR, you must redistribute the weight. Improper weight distribution can have an adverse ef fect on the way your vehicle steers and handles and the way the brakes operate. A loaded vehicle is shown in the illustration. Note [...]

TRAILER TOWING T railer towing with this vehicle is not recommended. RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Recreational towing for this vehicle is not r ecommended. NOTE: If the vehicle requir es towing, make sure all four wheels are of f the ground.[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 2 4 8 䡵 If Y our Engine Overheats ................ 2 4 8 䡵 TIREFIT T ire Repair .................... 2 4 9 䡵 Jump-Starting Procedur es ................ 2 5 4 䡵 Freeing A Stuck V ehicle ................. 2 5 7 䡵 T owing A Disabled V ehicle ............... 2 [...]

HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer[...]

control to maximum heat, the Mode contr ol to floor , and the fan control to HI. This allows the heater cor e to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads 240°F (1 16°C) or greater pull over and stop[...]

The TIREFIT system is located under an access panel in the trunk. 1. Air pump hose 2. Power plug and cable 3. Air pump switch 4. Pressur e gauge 5. TIREFIT sealant bottle 6. TIREFIT sealant hose TIREFIT Location TIREFIT contents 250 WHA T TO DO IN EMERGENCIES[...]

W ARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a[...]

5. Unscrew the valve cap fr om the valve on the deflated tire. 6. Screw the fitting at the end of TIREFIT sealant hose (6) coming from the sealant bottle (5) onto the tir e valve. 7. Insert the power plug (2) into the power point on the instrument panel. 8. Leave the parking brake set and the transmission selector lever in P ARK and start the engin[...]

19. W ith a tire pr essure of no less than 26 psi (1.8 bar) press the air pump switch (3) to 0 (OFF) and turn of f the engine. Then, disconnect the TIREFIT system from the tire and place it back in the vehicle. 20. Release the parking brake and drive the vehicle for approximately 10 minutes to ensur e optimum distribu- tion of the tire sealant with[...]

• Do not operate the electric air pump for more than eight minutes to avoid overheating. The air pump may be used again once it has cooled down. • Replace the TIREFIT sealant bottle (5) once every four years to assure optimum operation of the system. • If TIREFIT is liquid, clean water and a damp cloth will remove the material fr om the vehic[...]

NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals ar e located in the engine compartment for jump-starting. 1. W ear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery in another vehicle, park tha[...]

W ARNING! • Y ou should not try to start your vehicle by push- ing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze. Do not a[...]

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between Reverse and Drive. Usually the least accelerator pedal pressur e to maintain the rocking motion without spinni[...]

TOWING A DISABLED VEHICLE WITHOUT THE IGNITION KEY Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only ap- proved method of towing without the ignition key is with a flat bed truck. Pr oper towing equipment is neces- sary to prevent damage to the vehicle. TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE ([...]

If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACCESSOR Y position. Make certain the transmis- sion remains in NEUTRAL. TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE WITH A TOW DOLL Y The manufacture does not recommend that you tow this vehicle on a tow dolly . V ehicle damage [...]

[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine Compartment ............... 2 6 3 䡵 Onboard Diagnostic System — OBD II ...... 2 6 4 ▫ Loose Fuel Filler Cap .................. 2 6 4 䡵 Emissions Inspection And Maintenance Programs ............................ 2 6 5 䡵 Replacement Parts ..................... 2 6 6 䡵 Dealer Service ......[...]

▫ W indshield W ashers ................... 2 7 7 ▫ Exhaust System ...................... 2 7 8 ▫ Cooling System ....................... 2 7 8 ▫ Hoses And V acuum/V apor Harnesses ....... 2 8 3 ▫ Fuel System ......................... 2 8 3 ▫ Brake System ........................ 2 8 4 ▫ Automatic T ransmission ................ 2 8 6 ?[...]

6.1L ENGINE COMP ARTMENT MAINT AINING YOUR VEHICLE 263 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states, which [...]

b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station. If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance servic[...]

CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil Road conditions and your kind of driving affect the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures ar e below 32°F (0°C). • Stop [...]

NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever comes first. Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories [...]

Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can b[...]

Engine Air Cleaner Filter For normal driving conditions, inspect and replace the engine air cleaner filter at the intervals shown on Sched- ule “A.” For vehicles driven frequently in dusty or under severe conditions, inspect and r eplace the engine air cleaner filter at the intervals shown on Schedule “B.” W ARNING! The air induction system[...]

CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly . Contin- ued operation of your vehicle with a severe malfunction could cause the co[...]

• Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very r ough idling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently s[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. K[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information b[...]

Refer to the “Maintenance Schedule” in this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is n[...]

The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant or equivalent directly into the lock cylinder . Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically w[...]

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the [...]

accumulation of bugs, leaves, etc. If dirty , clean by gently spraying water from a gar den hose vertically down the face of the condenser . Check the coolant recovery bottle tubing for brittle r ub- ber , cracking, tears, cuts, and tightness of the connection at the bottle and radiator . Inspect the entire system for leaks. W ith the engine at nor[...]

CAUTION! • Mixing of coolants other than specified HOA T engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is introduced into the cooling system in an emergency , it should be replaced with the speci- fied coolant as soon as possible. • Do not use plain water alone or alcohol-base engine [...]

NOTE: Mixing coolant types will decrease the life of the engine coolant and will requir e more frequent coolant changes. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of coolant, and to insure that coolant will r eturn to the radiator from the coolant r ecovery bottle. The cap should be inspected and cleaned if there i[...]

ground. If ingested by a child, contact a physician immediately . Clean up any ground spills immediately . Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. W ith the engine off and cold, the level of the coolant in the bottle should be between the ranges indicated on the bottle. The[...]

• Make sure that the radiator and coolant r ecovery bottle overflow hoses are not kinked or obstr ucted. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If replacement is ever necessary , insta[...]

Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the “Mainte- nance Schedules” in this manual. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake [...]

W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately . Master Cylinder — Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system fai[...]

CAUTION! Do not allow petroleum base fluid to contaminate the brake fluid, all brake seal components could be damaged causing partial or complete brake failure. Automatic T ransmission Fluid Level Check Regular automatic transmission fluid level checks are not requir ed. For this reason, the dipstick is omitted. If you notice fluid loss or gear shi[...]

Severe Usage (fluid and filter) — Refer to Maintenance Schedule “B” Severe Usage is defined as: • Police, taxi, limousine, commercial type operation, or trailer towing where the vehicle is driven regularly for more than 45 minutes of continuous operation. If the transmission is disassembled for any reason, the fluid and filter should be cha[...]

• Stone and gravel impact. • Insects, tree sap, and tar . • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using Mopar 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If in[...]

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials ar e well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use Mopar 威 touch up paint or equivalent on scratches as soon as possible. Y our dealer has touch up pai[...]

W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and ther efore[...]

If the belts need cleaning, use Mopar 威 T otal Clean, a mild soap solution, or lukewarm water . Do not remove the belts from the vehicle to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly . Cleaning The Center Console Cup Holders Perform the following steps to clean the center console cup holders:[...]

Cavity Car- tridge Fuse Mini Fuse Description 1— — — 2— — — 3 — 15 Amp Blue Adjustable Pedals - if equipped 4 — 20 Amp Y ellow AC Clutch/Horn 5— — — 6 — 15 Amp Blue Front Contr ol Module (FCM) 7 — 20 Amp Y ellow Fog Lights 8 — 15 Amp Blue Lights – License, Park, Side Marker , Stop, T urn 9 — 15 Amp Blue Front Contr o[...]

Cavity Car- tridge Fuse Mini Fuse Description 20 20 Amp Blue — Starter 21 50 Amp Red — Anti-lock Brakes System (ABS) Pump Motor 22 40 Amp Green — AC Clutch/Radiator Fan High — Low 23 — — — 24 60 Amp Y ellow — Radiator Fan 25 30 Amp Pink — Front Contr ol Module (FCM) 26 — — — 27 30 Amp Pink — Front Contr ol Module (FCM) CAU[...]

Cavity Car- tridge Fuse Mini Fuse Description 1 60 Amp Y ellow — Ignition Off Draw (IOD) 2 40 Amp Green — Battery 3— — — 4 40 Amp Green — Battery Cavity Car- tridge Fuse Mini Fuse Description 5 40 Amp Green — Heated Seats - if equipped 6 — 20 Amp Y ellow Fuel Pump 7 — 20 Amp Y ellow Amplifier — Subwoofer 8 — 15 Amp Blue Igniti[...]

Cavity Car- tridge Fuse Mini Fuse Description 17 — 20 Amp Y ellow Cluster 18 — 20 Amp Y ellow Selectable Power Outlet 19 — 10 Amp Red Stop Lights 20 — — — 21 — — — 22 — — — 23 — — — 24 — — — 25 — — — 26 — — — 27 — 10 Amp Red Airbag/Airbag Control Module (ACM) 28 — 10 Amp Red Curtain Airbag - if eq[...]

Cavity Car- tridge Fuse Mini Fuse Description 35 — 5 Amp Orange Amplifier - if equipped/ Antenna/Ignition Delay/Overhead Console/Passenger Door Lock & Express Power W indow Switch - if equipped/Power Mir- rors - if equipped/Rear Defrost 36 — 20 Amp Y ellow Hands Free Phone - if equipped/Media System Monitor DVD - if equipped/Radio/ Satellit[...]

Cavity 13. If you experience temporary or permanent loss of these systems, see your authorized dealer for service. CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possi[...]

REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights .............. W 5 W Rear Compartment (T runk) Light ............. 5 6 2 Overhead Console Reading Lights ............. 5 7 8 V isor V anity Lights ..................... A6220 Glove Box Light ......................... 1 9 4 Door Courtesy .......................[...]

BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, Park/T urn Light, and Front Side Marker Light 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assem- bly on the driver side of the vehicle. 2. T wist the appropriate bulb and socket assembly counter-clockwise, and t[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3 — Park/T urn Light Bulb 4 — Side Marker Light Bulb 300 MAINT AINING YOUR VEHICLE[...]

Backup Light, Side Marker Light, T ail/T urn Light, and T ail/Stop Light 1. Open the T runk. 2. Remove two fasteners from the back of the tail light assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener fr om the back of the tail light assembly . 5. Push the electrical connector locking tab to the side. 6. Disconnect the electr[...]

1 — Backup Light Bulb 2 — Side Marker Light Bulb 302 MAINT AINING YOUR VEHICLE[...]

9. Pull the bulb out of the socket assembly . 10. Push the replacement bulb into the socket assembly . 1 1. Reinstall the bulb and socket assembly into the tail light assembly , and then turn it clockwise. 12. Reinstall the tail light assembly , fasteners, electrical connector , and trunk liner . 13. Close the trunk. 3 — T ail/T urn Light Bulb 4 [...]

License Light 1. Remove the screws securing the light to the r ear fascia. 2. Remove the bulb and socket assembly . 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly . 6. Reattach the light to the rear fascia, and then install the screws. FLUIDS AND CAP AC[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent Engine Oil (6.1 Liter) For best performance and maximum protection under all types of operating conditions, the manufactur[...]

Chassis Component Fluids, Lubricants, and Genuine Parts Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. Power Steering Reservoir Mopar 威 Power Steer[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 3 0 8 䡵 Maintenance Schedules .................. 3 0 8 ▫ Schedule “B” ........................ 3 1 1 ▫ Schedule “A” ........................ 3 2 1 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

• T axi, police, or delivery service (commercial ser - vice). 〫 • Off-r oad or desert operation. NOTE: If ANY of these apply to you, then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in Schedule “B” in this section. NOTE: If ANY of these apply to you, [...]

• Inspect the battery , and clean, and tighten the termi- nals as requir ed. • Check the fluid levels of coolant reservoir and brake master cylinder , and add as needed. • Check all lights and all other electrical items for correct operation. • Check rubber seals on each side of the radiator for proper fit. At Each Oil Change • Change the[...]

SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 . • Day or night temperatures ar e below 32°F (0°[...]

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX X Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X R[...]

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.[...]

Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XX XX X Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear brake linings and [...]

Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* X Inspect the front and r ear brake linings and r[...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X Replace [...]

Miles 108,000 11 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X X C[...]

Miles 123,000 126,000 129,000 132,000 135,000 (Kilometers) (205 000) (210 000) (215 000) (220 000) (225 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X Check[...]

Miles 138,000 141,000 144,000 147,000 150,000 (Kilometers) (230 000) (235 000) (240 000) (245 000) (250 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X Change[...]

SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear [...]

Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X X X X X Inspect the air cleaner filter and replace if requir ed.* XX X X X Replace the air cleaner filter . X Inspect the front and r ear brake li[...]

Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X [...]

Miles 108,000 1 14,000 120,000 126,000 132,000 (Kilometers) (180 000) (190 000) (200 000) (210 000) (220 000) [Months] [108] [1 14] [120] [126] [132] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and [...]

Miles 138,000 144,000 150,000 (Kilometers) (230 000) (240 000) (250 000) [Months] [138] [144] [150] Change engine oil and engine oil filter . X X X Inspect the air cleaner filter and replace if r equired.* X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X Replace the air conditioning filter . X Rotate th[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 2 8 ▫ Prepar e For The Appointment ............ 3 2 8 ▫ Prepar e A List ........................ 3 2 8 ▫ Be Reasonable W ith Requests ............. 3 2 8 䡵 If Y ou Need Assistance .................. 3 2 8 䡵 W[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center . Any communication to the Manufacturer’s Customer Center should include the following [...]

Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er’s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer’s Service Contracts. If you purchased a manufactur er’s Service Contract, you will[...]

REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may[...]

Corporation vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, dia- grams, and charts. • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix p[...]

T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under contr olled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tir es depends upon th[...]

W ARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure. 334 IF YOU NEED CONSUMER ASSIST ANCE[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) ............. 2 0 4 Adding Engine Coolant (Antifreeze) ......... 2 8 0 Adding Fuel .......................... 2 4 0 Adding W asher Fluid .................. 9 7 , 2 7 7 Adjustable Pedals ....................... 9 9 Air Cleaner , Engine (Engine Air Cleaner Filter) . 271 Air Conditioner Maintenance .............. 2 7 4 Air[...]

F l u i dT y p e .......................... 3 0 6 Shifting ............................ 1 9 6 Special Additives ..................... 2 8 7 A u t o s t i c k .......................... 198,200 B a l lJ o i n t s ............................ 2 7 6 B a t t e r y ............................... 2 7 3 Emergency Starting .................... 2 5 4 J u m[...]

Check Engine Light (Malfunction Indicator L i g h t ) ............................... 2 6 5 Child Restraint ................... 4 6 , 4 8 , 5 0 , 5 2 Child Restraint T ether Anchors ........... 4 9 , 5 0 Child Safety Locks ....................... 2 3 Clean Air Gasoline ...................... 2 3 8 Cleaning Wheels ............................. 2 8 9[...]

Door Locks ............................ 2 0 Door Locks, Automatic ................... 2 2 Door Opener , Garage .................... 1 0 4 D r i v eB e l t s ............................ 2 7 0 Driving On Slippery Surfaces .................. 2 0 2 DVD Player (V ideo Entertainment System) .... 1 6 6 Electric Remote Mirrors ................... 6 4 Elec[...]

E x t e r i o rL i g h t i n g ........................ 9 0 Filters Air Cleaner .......................... 2 7 1 Air Conditioning .................. 183,275 Engine Fuel ......................... 2 7 1 Engine Oil ....................... 270,305 Engine Oil Disposal ................... 2 7 0 Flashers Hazard W arning ...................... 2 4 8 T urn [...]

Gas Cap (Fuel Filler Cap) .............. 240,264 Gasoline, Clean Air ..................... 2 3 8 Gasoline (Fuel) ........................ 2 3 7 Gasoline, Reformulated .................. 2 3 8 Gauges Coolant T emperature .................. 1 2 5 Fuel ............................... 1 2 4 Speedometer ......................... 1 2 4 T achometer ......[...]

Instrument Panel and Contr ols ............. 1 2 2 Instrument Panel Lens Cleaning ............ 2 9 0 Interior Appearance Care ................. 2 8 9 Interior Fuses .......................... 2 9 1 I n t e r i o rL i g h t s .......................... 9 4 Intermittent W ipers (Delay W ipers) .......... 9 6 Introduction ............................ [...]

High Beam ........................ 9 3 , 1 2 7 High Beam Indicator ................... 1 2 7 I l l u m i n a t e dE n t r y ...................... 1 6 Instrument Cluster .................. 9 0 , 1 2 4 I n t e r i o r ........................... 9 4 , 1 0 3 License ............................. 3 0 4 Lights On Reminder .................... 9 2 Low F[...]

A u t o m a t i cD i m m i n g .................... 6 2 Electric Remote ....................... 6 4 E x t e r i o rF o l d i n g ....................... 6 3 Heated .............................. 6 4 O u t s i d e ............................. 6 3 Rearview ............................ 6 2 V a n i t y .............................. 6 4 Modifications/[...]

P e t s .................................. 5 4 Phone, Cellular ......................... 6 5 Phone, Hands-Free (UConnect™) ............ 6 5 Placard, T ire and Loading Information ....... 2 1 8 Power Brakes ............................. 2 0 4 Distribution Center (Fuses) .............. 2 9 1 Door Locks .......................... 2 1 M i r r o r s .[...]

Restraint, Head ......................... 8 6 Restraints, Child ........................ 4 6 Restraints, Occupant ..................... 2 9 Rocking V ehicle When Stuck .............. 2 5 7 R o t a t i o n ,T i r e s ......................... 2 2 9 Safety Checks Inside V ehicle ............... 5 6 Safety Checks Outside V ehicle .............. 5 7 Sa[...]

Shoulder Belts .......................... 2 9 Side Airbag ............................ 4 2 Signals, T urn ........................ 9 3 , 1 2 6 Slippery Surfaces, Driving On ............. 2 0 2 Snow Chains (T ire Chains) ................ 2 2 7 Snow T ires ............................ 2 2 8 Spark Plugs ........................... 2 7 0 Speed Control [...]

Alignment .......................... 2 2 7 Chains ............................. 2 2 7 General Information ................... 2 2 1 High Speed ......................... 2 2 3 Inflation Pressur es .................... 2 2 2 L i f eo fT i r e s ......................... 2 2 5 Load Capacity .................... 217,218 Pressur e Monitor System (TPMS) [...]

Untwisting Procedur e, Seat Belt ............. 3 4 V a n i t yM i r r o r s .......................... 6 4 V ariance, Compass ...................... 1 3 7 V ehicle Certification Label ................ 2 4 3 V ehicle Identification Number (VIN) .......... 6 V ehicle Loading .................. 218,243,244 V ehicle Modifications/Alterations ..........[...]

NOTES[...]

NOTES[...]

NOTES[...]