Dodge 2008 RT Caravan manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 531 pages
- 7.72 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Automobile
Dodge 2005 Ram 2500
448 pages 27.88 mb -
Automobile
Dodge 2006 ND Dakota
408 pages 24.05 mb -
Automobile
Dodge 2008 Ram 5500
527 pages 8.88 mb -
Automobile
Dodge 2009 Ram 3500
532 pages 24.65 mb -
Automobile
Dodge 2009 Journey
523 pages 8.91 mb -
Automobile
Dodge 2008 DX-49 Magnum SRT8
476 pages 5.82 mb -
Automobile
Dodge 2010 Challenger SRT8
436 pages 8.59 mb -
Automobile
Dodge 2004 Ram 3500
426 pages 7.22 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Dodge 2008 RT Caravan. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Dodge 2008 RT Caravan ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Dodge 2008 RT Caravan décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Dodge 2008 RT Caravan devrait contenir:
- informations sur les caractéristiques techniques du dispositif Dodge 2008 RT Caravan
- nom du fabricant et année de fabrication Dodge 2008 RT Caravan
- instructions d'utilisation, de réglage et d’entretien de l'équipement Dodge 2008 RT Caravan
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Dodge 2008 RT Caravan ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Dodge 2008 RT Caravan et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Dodge en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Dodge 2008 RT Caravan, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Dodge 2008 RT Caravan, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Dodge 2008 RT Caravan. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Car a v an OWNER’ S MANUAL 2008 2008 Car a v an 81-226-0819 First Edition Printed in U.S.A.[...]
-
Page 2
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. Y our driving ability can be seriously impaired with blood alcohol levels f[...]
-
Page 3
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 9 7 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]
-
Page 4
[...]
-
Page 5
INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications/Alterations ............ 7 1[...]
-
Page 6
INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents. Y ou are urged to r ead these publications carefully . Following the ins[...]
-
Page 7
INTRODUCTION 5 1[...]
-
Page 8
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entir e manual you may miss important infor- mation. Observe all W arnings and Cautions. VEHICLE IDE[...]
-
Page 9
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]
-
Page 10
[...]
-
Page 11
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ W ireless Ignition Node (WIN) ............. 1 2 m Sentry Key t Immobilizer System ............. 1 5 ▫ Replacement Keys ...................... 1 6 m Security Alarm System — If Equipped ......... 1 8 ▫ Rearming Of The System ............[...]
-
Page 12
▫ Power Sliding Side Door — If Equipped ...... 4 2 ▫ Sliding Side Door Child Protection Lock ...... 4 6 m Liftgate ............................... 4 8 ▫ Power Liftgate — If Equipped ............. 4 9 m Storage Bin Safety W arning ................. 5 2 ▫ Safety W arnings ....................... 5 2 ▫ Storage Bin Cover Emergency Release[...]
-
Page 13
▫ Restraining Infants And Small Children W ith Seat Delete Feature (Commer cial V ehicles Only) .... 9 0 m Engine Break-In Recommendations ........... 9 3 m Safety T ips ............................ 9 3 ▫ Safety Checks Y ou Should Make Inside The V ehicle .............................. 9 3 ▫ Periodic Safety Checks Y ou Should Make Outside The[...]
-
Page 14
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Remote Keyless Entry (RKE) transmitter with integrated ignition Key and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the double-sided key into the ignition switch with either side up. Wireless Ignition Node (WIN) The W ir[...]
-
Page 15
The valet key allows for entry into the vehicle should the battery in the vehicle or the transmitter go dead. The valet key is also for locking the glove box. Y ou can keep the valet key with you when valet parking. T o remove the valet key fr om the transmitter , slide the mechanical latch at the top of the transmitter sideways with your thumb and[...]
-
Page 16
2. Insert the integrated ignition key into the ignition switch. 3. T urn the ignition switch to the ST ART position and release it as soon as the starter engages. The starter motor will continue to run and will disengage automatically when the engine begins running. Ignition Key Removal Place the gear selector lever in P ARK. T urn the ignition key[...]
-
Page 17
Key-In-Ignition Reminder If you open the driver’s door with the integrated ignition key in the ignition, a chime will sound to remind you to remove the key . NOTE: The Key-In-Ignition reminder only sounds when the integrated ignition key is placed in the OFF or ACC position. SENTR Y KEY T IMMOBILIZER SYSTEM The Sentry Key t Immobilizer system pre[...]
-
Page 18
NOTE: • The Sentry Key t Immobilizer system is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting pr oblems and loss of security protection. • Exxon/Mobil Speedpass™, additional RKE transmit- ters, or any other transponder-equipped components on the same key chain will not cause a faul[...]
-
Page 19
programming a blank transmitter to the vehicle electr on- ics. A blank transmitter is one that has never been programmed. NOTE: When having the Sentry Key t Immobilizer system serviced, bring all vehicle RKE transmitters with you to the authorized dealer . Customer Key Programming If you have two valid RKE transmitters with integrated keys, you can[...]
-
Page 20
NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased fr om the sys- tem’s memory . This will prevent the lost key from starting your vehicle. The remaining keys must then be repr ogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be repr o- grammed. General Informa[...]
-
Page 21
Arming The System Remove the key from the ignition switch and either pr ess a power door lock switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter . After all the doors ar e locked and closed the V ehicle Security Alarm Indicator Light in the instrument cluster will flash rapidly t[...]
-
Page 22
previously described arming sequences has occurr ed, the system will arm regar dless of whether you are in the vehicle or not. If you remain in the vehicle and open a door , the alarm will sound. If this occurs, disarm the system. If the Security Alarm System is armed and the battery becomes disconnected, the system will remain armed when the batte[...]
-
Page 23
REMOTE KEYLESS ENTR Y (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate, and activate the P ANIC alarm, optional power liftgate, left power sliding door , and right power sliding door from distances up to about 23 ft (7 m) using a hand-held radio RKE transmitter . The RKE transmitter need not be pointed at the ve[...]
-
Page 24
Seven-button transmitters will provide functions that allow the same basic operation as the three-button, but may also be used to OPEN/CLOSE the optional power liftgate, left power sliding door , or right power sliding door . Other options of the system allow you to turn ON/OFF the Sound Horn with Remote Lock and Flash Lights with Remote Key LOCK f[...]
-
Page 25
• For vehicles not equipped with the EVIC, the Remote UNLOCK feature can be enabled or disabled by per - forming the following procedur e: 1. Perform this operation while standing outside the vehicle. 2. Press the LOCK button for five to ten seconds. 3. While the LOCK button is pressed, (after five seconds) press the UNLOCK button. Release both b[...]
-
Page 26
Using The P ANIC Alarm T o turn the P ANIC Alarm featur e ON or OFF , press and hold the P ANIC button on the RKE transmitter for at least one second and release. When the P ANIC Alarm is on, the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. The P ANIC Alarm will stay on for three minute[...]
-
Page 27
Open/Close Power Left Power Sliding Door — If Equipped Press the Left Power Sliding Door button twice on the RKE transmitter within five seconds to Open/Close Power Left Power Sliding Door . If the button is pushed while the door is being power-closed, the door will reverse to the full open position. Open/Close Power Right Power Sliding Door — [...]
-
Page 28
The table below explains the Lamp Flash options. Function Which T urn Signal Lamps Number of Flashes Lock All 1 Unlock 1st Press Left Side 2 Unlock All Doors All 2 Left Side Left Side 2 Right Side Right Side 2 Liftgate All 2 Programming Additional RKE T ransmitters Refer to Sentry Key t Immobilizer System “Customer Key Programming.” If you do n[...]
-
Page 29
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch the battery , clean it with rubbing alcohol. 3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with part 15 of the FCC rules and RSS 2[...]
-
Page 30
REMOTE ST ARTING SYSTEM — IF EQUIPPED Remote Starting conveniently starts the engine from outside the vehicle by using the Remote Keyless Entry (RKE) transmitter while maintaining the Security Alarm System. The Remote Starting System has a targeted range of 328 ft (100 m). In order to Remote Start your vehicle, the hood, liftgate, and all the doo[...]
-
Page 31
T o Enter Remote Start Mode Press and r elease the Remote Start button on the RKE transmitter twice, within five seconds. The parking lights will flash and the horn will honk twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15 minute cycle. NOTE: • If your power door locks were unlocked[...]
-
Page 32
T o Enter the V ehicle After Remote Start T o enter the vehicle while the engine is running during a Remote Start, you must first unlock the vehicle using the UNLOCK button on the transmitter . After the vehicle is unlocked, you have 60 seconds to enter the vehicle, insert the key into the ignition switch and move it to the RUN position, otherwise [...]
-
Page 33
T o T urn Off the Engine While in Remote Start Mode Press and r elease the Remote Start button one time. NOTE: T o avoid inadvertent shut downs, the system will disable the one time press of the Remote Start button for two seconds after receiving a valid Remote Start request. When T o Reset Remote Start The vehicle can be started remotely up to a m[...]
-
Page 34
If the lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the keys are not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle alwa[...]
-
Page 35
If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is o[...]
-
Page 36
Lock Doors Automatically — If Equipped If the Lock Doors Automatically feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The Lock Doors Automatically feature is enabled when your vehicle is shipped from the assembly plant and can be disabled by using the following procedur e: • On E[...]
-
Page 37
The Lock Doors Automatically at 15 mph (24 km/h) feature can be r eactivated by repeating the above men- tioned procedur e or by performing the procedure in the EVIC, Customer Programmable Featur es section on ve- hicles so equipped. Unlock Doors Automatically On Exit — If Equipped The Unlock Doors Automatically On Exit featur e unlocks all of th[...]
-
Page 38
7. T o reactivate this featur e, repeat the above steps. 8. If a chime is not heard, the pr ogram mode was canceled before the featur e could be changed. If neces- sary , repeat the above procedur e. The Unlock Doors Automatically On Exit feature can be reactivated by r epeating the above mentioned procedure or by performing the procedur e in the E[...]
-
Page 39
POWER WINDOWS Y ou can control all windows using switches on the driver’s door trim panel. The switches will operate only when the ignition switch is in the ON or ACC position and during power accessory delay . NOTE: Power W indow switches will also remain active for up to 90 seconds after the ignition switch has been turned OFF , depending upon [...]
-
Page 40
Power W indow Lockout Switch — If Equipped The driver may lock out all power windows by depressing the bar switch just below the power window switches. Front Passenger Power W indow Switch There is a single switch on the fr ont passenger’s door trim panel which operates the passenger door window and locks and unlocks all doors. The switch will [...]
-
Page 41
Sliding Side Door Power W indow Switch There is a single switch on each sliding side door which operates the sliding side door window . The switches will operate only when the ignition switch is in the ON or ACC position. NOTE: The sliding door windows do not fully open, stopping several inches above the window sill. Auto Down Feature — If Equipp[...]
-
Page 42
Auto Up Feature W ith Anti–Pinch Protection — If Equipped The left front window switch may be equipped with an Auto Up feature. Lift the window switch to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the Auto Up operation, push down on the switch briefly . T o close th[...]
-
Page 43
2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. W ind Buffeting W ind buffeting can be described as the per ception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit win[...]
-
Page 44
• There is a hold-open latch that is activated when the sliding door is fully opened. This latch will keep your sliding door open on any incline. T o close the sliding door after the hold-open latch is activated, you must rock the inside handle forwar d or pull outward on the outside handle. Always make sure that the sliding door is fully latched[...]
-
Page 45
NOTE: The power sliding side door must be unlocked before the power sliding door switches will operate. If the inside or outside door handles are used while the power sliding side door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually . T o avoid unintentional operation of the power sliding[...]
-
Page 46
• If the power sliding side door is not in the full open or close position, it will fully open when a power sliding door switch is pressed. T o close the door , wait until it is fully open and then press the switch again. • The power sliding side door switches will not operate if the transmission gear selector lever is in gear or the vehicle sp[...]
-
Page 47
Y ou can turn the feature back on by r epeating the above mentioned procedur e. Power Sliding Side Door Master Lock Switch The power sliding side doors may also be opened by pressing the switches on the over head console or the switches located on the trim panel just in front of the sliding door . T o provide a safer envir onment for small children[...]
-
Page 48
Sliding Side Door Child Protection Lock T o provide a safer envir onment for small children riding in the rear seats, the sliding doors ar e equipped with a child protection door lock system. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked [...]
-
Page 49
NOTE: • After engaging the Child Protection Door Lock, al- ways test the door from the inside to make certain it is in the desired position. • When the Child Protection Door Lock system is en- gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the outside door handle, the Remote Keyless Entry [...]
-
Page 50
LIFTGA TE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors. T o open the liftgate, depress the liftgate r elease handle located on the underside of the license plate bar and pull the liftgate open with[...]
-
Page 51
POWER LIFTGA TE — IF EQUIPPED The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmit- ter . Press the button on the transmitter twice within five seconds, to open the power liftgate. When the liftgate is fully open, pressing the button twice within five seconds, a second time, will close the li[...]
-
Page 52
The power liftgate may be closed by pressing the button, located in the upper left trim in the liftgate opening. Pushing once will only close the liftgate. This button cannot be used to open the liftgate. W ARNING! During power operation, personal injury or cargo damage may occur . Ensure the liftgate travel path is clear . Make sure the liftgate i[...]
-
Page 53
• The power liftgate must be in the full open or close positions for any of the buttons to operate. If the liftgate is not in the full open or close positions, it must be opened or closed manually . • If the liftgate release button is activated while the power liftgate is closing, the liftgate will reverse to the full open position. • The pow[...]
-
Page 54
Gas props support the liftgate in the open position. However , because the gas pressure dr ops with tempera- ture, it may be necessary to assist the pr ops when opening the liftgate in cold weather . STORAGE BIN SAFETY W ARNING Safety W arnings W ARNING! Always close the storage bin covers when your ve- hicle is unattended. Do not allow children to[...]
-
Page 55
NOTE: Y our vehicle may be built with a release strap or release lever attached to the Storage Bin Cover latch mechanism. Storage Bin Cover Emergency Release Lever — If Equipped As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release lever built into the storage bin cover latching mechanism. NOTE: In the event [...]
-
Page 56
Storage Bin Cover Emergency Release Strap — If Equipped As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release strap built into the storage bin cover latching mechanism. NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pullin[...]
-
Page 57
NOTE: Do not use the storage bin emergency r elease strap to lift the storage bin cover . The strap is intended for emergency r elease only . OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems: • Three-point lap and shoulder belts for all seating positions • Pretensioning and load-limiting[...]
-
Page 58
• All seat belt systems (except the driver’s, Swivel n’ Go, and third r ow center position) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to restrain a child seat or secur e a large item in a seat. If you will [...]
-
Page 59
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thr own from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at[...]
-
Page 60
W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries[...]
-
Page 61
2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the r ear seats. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. W ARNING! A belt that is worn under your arm is very dangerous. Y our body could strike the insid[...]
-
Page 62
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]
-
Page 63
4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can increase[...]
-
Page 64
6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , ch[...]
-
Page 65
pushing anywhere on the anchorage. T o move the an- chorage downward, squeeze the actuation buttons while simultaneously pushing down on the anchorage assem- bly . As a guide, if you are shorter than average you will prefer a lower position, and if you ar e taller than average you will prefer a higher position. When you r elease the anchorage, try [...]
-
Page 66
Seat Belt Pretensioners The seat belts for both front seating positions ar e equipped with pretensioning devices that ar e designed to remove slack fr om the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision. Pretensioners work for[...]
-
Page 67
NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or ST ART position. DaimlerChrysler does not r ecom- mend deactivating BeltAlert t . 1. W ith all doors closed and the ignition switch in any position except ON or ST ART , buckle the driver’s seat belt. 2. T urn the ignition switch to t[...]
-
Page 68
Seat Belt Extender If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough. When it is not requir ed, remove the ex-[...]
-
Page 69
window . If the vehicle is equipped with SABIC air bags, they are located above the side windows and their covers are also labeled: SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. Airbag System Components The airbag system consists of the following: • Occupant Restraint Contr[...]
-
Page 70
The first stage inflator is triggered immediately during an impact that requir es airbag deployment. The timing of the second stage determines whether the output force is low , medium, or high. If a low output is sufficient to meet the need, the second stage is expended later in the crash event. Driver Airbag Special Features Driver airbag deployme[...]
-
Page 71
When the airbag deploys, it opens the seam between the front and side of the seat’s trim cover . Each airbag deploys independently , that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag. W ARNING! • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou[...]
-
Page 72
Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC Airbags offer side-impact and vehicle r ollover protection to fr ont and rear seat outboard occupants in addition to that provided by the body str ucture. Each airbag features inflated chambers placed adjacent to the head of each outboard occupant that r educe the potential f[...]
-
Page 73
moderate to severe side collisions. In certain types of collisions, both the front and side airbags may be trig- gered. However , even in collisions where the airbags work, you need the seat belts to keep you in the right position for the airbags to protect you pr operly . Here ar e some simple steps you can take to minimize the risk of harm from a[...]
-
Page 74
4. If your vehicle has side airbags, do not lean against the door , airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under ( If Y ou Need Assistance ( in Section 9 of this m[...]
-
Page 75
impact sensors signals, a central electronic ORC deploys the front airbags, side inflatable airbag curtains, side seat thorax airbags, and front seat belt pr etensioners as re- quired for each type of impact. The ORC monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST ART or ON position. These inc[...]
-
Page 76
Front and Side Impact Sensors Impact Sensors trigger airbag deployment in front and side impacts, and aid the ORC in determining appropri- ate response to impact events. Additional sensors in the ORC determine the level of airbag deployment and provide verification. Acceleration Sensors Acceleration Sensors trigger airbag deployment based on dramat[...]
-
Page 77
• T urns on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically . If A Deployment Occurs The airbag systems are designed to deploy when the Occupant Restraint Controller (ORC) detect a moderate- to-severe collision, to help r estrain the driver , front pas[...]
-
Page 78
irritation, move to fresh air . If the irritation continues, see your doctor . If these particles settle on your clothing, follow the garment manufacturer’s instr uc- tions for cleaning. • It is not advisable to drive your vehicle after the airbags have deployed. If you are involved in another collision, the airbags will not be in place to prot[...]
-
Page 79
W ARNING! Do not attempt to modify any part of your advanced airbag system. The airbag may inflate accidentally or may not function properly if modifications are made. T ake your vehicle to an authorized dealer for any advanced airbag system service. If your seat, includ- ing your trim cover and cushion, needs to be serviced in any way (including r[...]
-
Page 80
located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to recor d up to approximately five seconds of specific vehicle data parameters (see the following list) in an event data recor der prior to the mo[...]
-
Page 81
accessing the electronic data stor ed, unless ordered to download data by a court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be provided to the custodial entity upon r equest. General data that does not identify particular vehicles or crashes may be released for incorporation in aggr egate crash databases, such a[...]
-
Page 82
• Engine control status (including engine speed) • T ransmission gear selection • Cruise contr ol status • T raction/stability control status • T ire pr essure monitoring system status – if equipped Integrated Child Seat — If Equipped Operating instructions for the second r ow bench seat with Integrated Child Seat are included with th[...]
-
Page 83
Child Restraints Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it. Children 12 years and younger should ride pr operly buckl[...]
-
Page 84
• Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and 9 convertible 9 child seats. Both types of child restraints ar e held in the vehicle by the lap/ shoulder belt or the[...]
-
Page 85
Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year . These child seats [...]
-
Page 86
• If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. If this doesn’t help, move the child to the center rear seating position and use the lap belt. Never allow a child to put the shoulder belt under an arm or behind their back. NOTE: For additional information, refer to www .seatcheck.org or call[...]
-
Page 87
Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it, befor e you buy it. • The restrain[...]
-
Page 88
• Buckle the child into the seat according to the child restraint manufactur er’s directions. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious[...]
-
Page 89
When using the tether anchorages in the center position on third r ow fold-in-floor seating, ensure that the strap is routed underneath the top of the seatback and the head restraint. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the[...]
-
Page 90
Because the lower anchorages are to be intr oduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchor - ages will continue to have features for installation in vehicles using the lap or lap/shoulder belt. They will also have tether straps, and you are ur ged to take advantage of all of[...]
-
Page 91
Not all child restraint systems will be installed as we have described here. Again, carefully follow the instruc- tions that come with the child restraint system. W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the m[...]
-
Page 92
This vehicle is equipped with a child restraint tether anchor located on the lower rear of the fr ont passenger seat. Use this tether anchor to secure only forward facing child restraints equipped with an upper tether strap. W ARNING! Rearward-facing infant restraints must never be se- cured in the passenger seat of a vehicle with a passenger airba[...]
-
Page 93
VEHICLE EQUIPPED WITH THE REAR SEA T DE- LETE FEA TURE (Commercial V ehicles Only). • The forward-facing child seat is for childr en from about 20 to 40 lbs (9 to 18 kg), and more than one year old. • A “convertible” child seat, one that is designed to be used for children who ar e too heavy for a rearward- facing infant seat, may be used I[...]
-
Page 94
NOTE: Ensure that the child r estraint tether strap is centered between the headr est supports underneath the head rest. 4. Using the hook attached to the child restraint tether strap, attach the child restraint tether strap to the metal anchor on the lower rear of the fr ont passenger seat. 5. Following the child seat manufacturer’s instr uction[...]
-
Page 95
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your vehicle. Drive moderately during the first 300 mi (500 km). After the initial 60 mi (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-thr ottle acceleration, within the limits of local traffic laws, contributes[...]
-
Page 96
Airbag Light The light should come on and remain on for four seconds as a bulb check when the ignition switch is first turned ON. If the LED is not lit during starting and/or the light stays on or comes ON while driving, have the system checked by an authorized dealer . Defroster Check operation by selecting the defrost mode and place the blower co[...]
-
Page 97
Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow the safety tips below . Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehi[...]
-
Page 98
[...]
-
Page 99
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors .............................. 1 0 0 ▫ Manual Rear V iew Day/Night Mirror — If Equipped ......................... 1 0 0 ▫ Exterior Mirrors ...................... 1 0 2 m Hands-Free Communication (UConnect t )— If Equipped ........................... 1 0 4 ▫ Operation ........[...]
-
Page 100
▫ Setting Memory Positions And Linking RKE T ransmitter T o Memory ................. 1 5 6 m T o Open And Close The Hood ............. 1 5 8 ▫ Hood Safety Switch — If Equipped ........ 1 5 9 m Lights ............................... 1 6 0 ▫ Interior Lighting ...................... 1 6 0 ▫ Exterior Lights ....................... 1 6 2 m Mul[...]
-
Page 101
▫ Power Inverter — If Equipped ............ 1 9 6 ▫ Electrical Outlet Use W ith Engine Off ....... 1 9 8 m Sun Screens— If Equipped ................ 1 9 8 m Cup Holders And Convenience T ray Drawer . . . 200 ▫ Instrument Panel Cup Holders ............ 2 0 0 ▫ Interior Bottle Holders .................. 2 0 1 ▫ Smokers Package Kit — I[...]
-
Page 102
MIRRORS Manual Rear View Day/Night Mirror — If Equipped Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). Th[...]
-
Page 103
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cove[...]
-
Page 104
EXTERIOR MIRRORS Side V iew Mirrors T o receive maximum benefit, adjust the outside mirr or(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . W ARNING! V ehicles and other objects seen in a outside convex mirrors will look smaller and farther away than they really are. Relying too much on[...]
-
Page 105
Both mirrors will always move together and will fold anytime the button is pressed. The ignition switch does not have to be in the ON position. Power Remote Side V iew Mirrors — If Equipped Use the mirror select switch located on the driver’s door trim panel, to adjust the view obtained in the outside mirrors. Pr ess the switch to the Left or R[...]
-
Page 106
Select a mirror and pr ess one of the four arrows for the direction you want the mirr or to move. Driver’s power mirror pr eselected positions can be con- trolled by the optional Driver Memory Seat Featur e. Refer to “Driver Memory Seat — If Equipped” in Section 3 of this manual. HANDS-FREE COMMUNICA TION (UConnect T )— IF EQUIPPED NOTE: [...]
-
Page 107
UConnect t allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The UConnect t phonebook enables you to store up to 32 names, with four numbers per name. Each language has a separate 32-name phonebook accessible only in t[...]
-
Page 108
The UConnect t system can be used with any Hands-Free Profile certified Bluetooth t cellular phone. See the UConnect t website for supported phones. If your cellu- lar phone supports a differ ent profile (e.g., Headset Profile) you may not be able to use any UConnect t features. Refer to your cellular service pr ovider or the phone manufacturer for[...]
-
Page 109
example, you can use the combined form voice com- mand 9 Phonebook New Entry , 9 or you can break the combined form command into two voice commands: 9 Phonebook 9 and 9 New Entry . 9 Please remember , the UConnect t system works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. V [...]
-
Page 110
• When prompted, after the beep, say 9 Pair a Phone 9 and follow the audible prompts. • Y ou will be asked to say a four-digit Personal Identi- fication Number (PIN), which you will later need to enter into your cellular phone. Y ou can enter any four-digit PIN. Y ou will not need to remember this PIN after the initial pairing process. • For [...]
-
Page 111
user from dialing an invalid combination of numbers. For example, in the U.S., 234-567-890 is nine digits long, which is not a valid U.S. phone number - the closest valid phone number has 10 digits. • The UConnect t system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call by Saying a Name[...]
-
Page 112
• When prompted, say the name of the new entry . Use of long names helps the voice recognition and it is recommended. For example, say 9 Robert Smith 9 or 9 Robert 9 instead of 9 Bob. 9 • When prompted, enter the number designation (e.g., 9 Home, 99 W ork, 99 Mobile, 9 or 9 Pager 9 ). This will allow you to store multiple numbers for each phone[...]
-
Page 113
and you may see a message on the phone display that the Bluetooth t link is busy . In this case, the user must first disconnect or drop the Bluetooth t connection to the UConnect t system, and then send the address book entry via Bluetooth t . Please see your phone Owner ’s Manual for specific instructions on how to drop the Bluetooth t connectio[...]
-
Page 114
Delete Entries in the UConnect t Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Delete. 9 • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wi[...]
-
Page 115
List All Names in the UConnect t Phonebook • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook List Names. 9 • The UConnect t system will play the names of all the phonebook entries. • T o call one of the names in the list, press the “V oice Recognition” button during the playing of th[...]
-
Page 116
Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the curr ent call on hold and answer the incoming call. NOTE: The UConnect t s[...]
-
Page 117
Three-W ay Calling T o initiate three-way calling, pr ess the “V oice Recogni- tion” button while a call is in progr ess, and make a second phone call, as described under 9 Making a Second Call While Current Call in Pr ogress. 9 After the second call has established, press and hold the PHONE button until you hear a double beep, indicating that [...]
-
Page 118
• After the ignition key is switched to OFF , a call can continue on the UConnect t system for a certain dura- tion, after which the call is automatically transferred from the UConnect t system to the mobile phone. • An active call is automatically transferred to the mobile phone after the ignition key is switched to OFF . UConnect T System Fea[...]
-
Page 119
• After the 9 Ready 9 prompt and the following beep, say 9 Emergency 9 and the UConnect t system will instruct the paired cellular phone to call the emer gency num- ber . This feature is supported in the U.S., Canada, and Mexico. NOTE: The emergency number dialed is based on the country where the vehicle is pur chased (91 1 for the U.S. and Canad[...]
-
Page 120
certain companies, which time out a little too soon to work properly with the UConnect t system. V oice Mail Calling T o learn how to access your voice mail, refer to 9 W orking with Automated Systems. 9 W orking with Automated Systems This method is used in instances where one generally has to press numbers on the cellular phone keypad while navig[...]
-
Page 121
NOTE: • Y ou may not hear all of the tones due to cellular phone network configurations; this is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature. Barge In - Overriding Prompts The “V oice Recognition” button can be used when you wish to skip part of a pr[...]
-
Page 122
dialing a number with your paired Bluetooth t cellular phone, the audio will be played through your vehicle’s audio system. The UConnect t system will work the same as if you dial the number using voice recognition. NOTE: Certain brands of mobile phones do not send the dial ring to the UConnect t system to play it on the vehicle audio system, so [...]
-
Page 123
Connect or Disconnect Link Between the UConnect t System and Cellular Phone Y our cellular phone can be paired with many dif ferent electronic devices, but can only be actively 9 connected 9 with one electronic device at a time. If you would like to connect or disconnect the Bluetooth t connection between a UConnect t paired cellular phone and the [...]
-
Page 124
• The selected phone will be used for the next phone call. If the selected phone is not available, the UConnect t system will return to using the highest priority phone present in or near (appr oximately within 30 ft [9 m]) the vehicle. Delete UConnect t Paired Cellular Phones • Press the PHONE button to begin. • After the 9 Ready 9 prompt an[...]
-
Page 125
Repeat the words and phrases when pr ompted by the UConnect t system. For best results, the V oice T raining session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched OFF . This procedur e may be repeated with a new user . The system will adapt to the last trained voice only . T [...]
-
Page 126
• When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say 9 Send. 9 • Storing names in the phonebook when the vehicle is not in motion is recommended. • It is not recommended to stor e similar sounding names in the UConnect t phonebook. • The UConnect [...]
-
Page 127
• Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down. Bluetooth t Communication Link Cellular phones have been found to lose connection to the UConnect t system. When this happens, the connec- tion can generally be [...]
-
Page 128
126 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]
-
Page 129
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 127 3[...]
-
Page 130
128 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]
-
Page 131
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 129 3[...]
-
Page 132
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]
-
Page 133
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. SEA TS Seats are a primary [...]
-
Page 134
Manual Front And Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar up and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressur e, move forward and rearwar d on the seat to be sure the seat adjusters have latched. W ARNING! Adjusting a seat while the v[...]
-
Page 135
8–W ay Driver’s Power Seat — If Equipped The driver’s power seat switches are located on the outboard side of the seat. The fr ont switch controls up/down, forward/r earward, and tilt adjustment. The rear switch contr ols the seatback recline adjustment. CAUTION! DO NOT place any article under a power seat or impede its ability to move as i[...]
-
Page 136
Adjustable Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Pull up or push down on the head restraint cushion so that the upper edge is as high as practical. T o raise the head restraint, pull up on the head restraint. T o lower the head restraint, depress the release tab located at th[...]
-
Page 137
Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for fr ont heated seats are located on the center instrument panel ar ea. The switch in- dicator lights will show when the HIGH or LOW heat is ON. Press the switch once to choose HIGH (two lights), press it a second time to choose LOW (one light), pr[...]
-
Page 138
W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time. DO NOT place an[...]
-
Page 139
W ARNING! DO NOT ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked. Manual Lumbar Adjust Lever — If Equipped The lumbar adjustment handle is located on the outboa[...]
-
Page 140
Stow ’n Go Seating — If Equipped On vehicles equipped with Stow ’n Go seating, the second and third r ow seats may be folded into the floor for convenient storage. T o Fold Second Row Seats 1. Move the front seat fully forwar d. 2. Lower the head restraints and raise the armr ests on the second row seat. 3. Slide the storage bin locking mecha[...]
-
Page 141
4. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down. T o assure the seatback is latched in the folded position, additional downward pr essure on the seatback may be requir ed when folding. Storage Bin Cover Lock Release Second Row Seatback Release Lever UNDERST ANDING THE FEA TURES OF YOUR V[...]
-
Page 142
5. Pull rearwar d on the release strap located at the rear of the seat and tumble the seat forward into the storage bin. 6. Close the storage bin cover and slide the storage bin locking mechanism to the locked position. CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal[...]
-
Page 143
T o Unfold Second Row Seats 1. Slide the storage bin locking mechanism to the 9 un- locked 9 position and then pull up on the storage bin latch to open the cover . 2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearwar d to latch the seat anchors. Second Row Seat Release Handle UNDERST ANDING THE FEA TURES OF YOU[...]
-
Page 144
3. Pull up on the seatback recliner lever located on the outboard side of the seat, to r eturn the seatback to its full upright position. 4. Close the storage bin cover and adjust the head restraint to the desir ed position. Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor , it is removable for added car go spac[...]
-
Page 145
The power recline featur e, located on the side of the seat cushion, adjusts the seatback angle forward/r earward for occupant comfort Remote Third Row Power Seat Switch— If Equipped A One-T ouch Third Row Power Folding Seat switch is located in the left rear trim panel as part of a switch-bank. Third Row Power Seat Switch One T ouch Folding Seat[...]
-
Page 146
The rear switch bank allows multiple power folding and unfolding positions for the third r ow seats. Left and right third r ow seats can be folded individually or together . The One T ouch Third Row Power Folding Seat adjusts to the following positions using the switch bank located on the left rear trim panel: Rear Panel Power Switch Bank 1 — Ope[...]
-
Page 147
NOTE: The Third Row Power Seat system includes obstacle detection for safe operation. When the system detects an obstacle, the motors will stop and reverse the motion for a brief period. Should this occur , remove the obstacle and repr ess the button again, for the desired position. T o Fold Third Row Seats Manually — If Equipped 1. Lower the hea[...]
-
Page 148
T o Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “1” to unlock the r ecliner . 3. Pulling strap “3” releases the seatback to r eturn to its full upright position. 4. Adjust the head restraint to the desir ed posit[...]
-
Page 149
W ARNING! T o avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode. Easy Access Seating The second row Stow ’n Go seats can be tilted forwar d for easy access to the third r ow seat or rear cargo ar ea. T o tilt the seat, pull forward on the r elease strap located on the front of[...]
-
Page 150
Swivel ’n Go Premium Seating — If Equipped Premium second r ow Swivel ’n Go Seating features include: • A table that installs between the second and third row seats. The table disassembles and stows in the hidden second row floor storage bin • Seats rotate to face forwar d or rearward • Seat belts are integrated into the swivel seats ?[...]
-
Page 151
T o swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation. Once the seat begins to r otate, the handle may be released. The seat locks in position once r eaching the forward or r earward positions only . Seatbacks fold forward on an angle, not flat. This allows the seats to swive[...]
-
Page 152
Removing Swivel ’n Go Premium Seating — If Equipped 1. Remove any obstructions fr om the floor behind the seat, and stow the Third Row Seat. 2. Pull up on the release bar located at the bottom fr ont edge of the swivel seat. 3. From behind the seat, lift up on the r ear of the seat cushion while pulling the seat in a rearwar d direction. 4. Rem[...]
-
Page 153
Swivel ’n Go Premium Seating T able — If Equipped The Swivel ’n Go Seating T able consists of an easily assembled post and top. The table and leg are stor ed beneath the floor when not in use. T o install the table follow these steps: 1. Swivel the second row seats so they ar e facing the rear . Second Row Seating and T able Second Row Seatin[...]
-
Page 154
2. Open the floor storage cover in front of the second r ow seats. 3. Remove the pole and table top by loosening the hook and loop straps. 4. Insert pole into base by aligning the lock button into notch of the base. T able and Leg Storage Installing T able Leg Into Base 1 - T able Base 2 - Lock/Release Button 152 UNDERST ANDING THE FEA TURES OF YOU[...]
-
Page 155
5. T wist the pole in a clockwise rotation until it stops. Note: Y ou will hear an audible “click” when the lock button engages the base. 6. Place the table top over the installed pole aligning with the mating feature of the underside of the table top. Apply pressur e on the table top and press downward. Note: Y ou will hear an audible “click[...]
-
Page 156
T o separate the table top from the pole, follow these steps: 1. Locate the release latch on the underside of the table top. 2. Pull horizontally on the latch to activate the release from the pole. 3. While pulling on the latch, pull upward to r emove the table top from the pole. NOTE: The table top should be removed fr om the leg prior to removing[...]
-
Page 157
Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all r ear seats and some front seats. The floor supports the partial weight of the bagged goods. DRIVER MEMOR Y SEA T — IF EQUIPPED Once programmed, the Memory Buttons 1 and 2 on the driver’s door panel can be used to re[...]
-
Page 158
Setting Memory Positions And Linking RKE T ransmitter T o Memory NOTE: Each time the SET(S) button and a numbered button (1 or 2) are pr essed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key and turn the ignition switch to the ON position. 2. Press the driver door Memory Buttons number 1 if you are set[...]
-
Page 159
10. Insert the ignition key and turn the ignition switch to the ON position. 1 1. Select 9 Remote Linked to Memory 9 in the Electronic V ehicle Information Center (EVIC) and enter 9 Ye s 9 or select 9 No 9 from the EVIC and enter 9 Ye s 9 . Refer to the Customer Programmable featur es in the Electronic V e- hicle Information Center (EVIC) section f[...]
-
Page 160
2. Press and r elease Memory Button 1. The system will recall any memory settings stor ed in position 1. W ait for the system to complete the memory recall befor e continu- ing to step 3. 3. Press and r elease the memory SET(S) button located on the driver’s door . A chime will sound signaling that you are in the memory set mode. 4. W ithin five [...]
-
Page 161
Use the hood prop r od to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 12 inches (30 cm) and then drop it. This should secur e both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. W ARNING! If the hood [...]
-
Page 162
If the vehicle is equipped with the Compass Mini-T rip Computer (CMTC) and the hood is not latched, a “hood” will be displayed in the PRNDL/Odometer window of the instrument cluster . LIGHTS All of the lights, except the hazard warning lights, headlamp high beams and flash to pass, are contr olled by switches to the left of the steering column [...]
-
Page 163
The interior lights will automatically turn off in about 10 minutes for the first activation and 90 seconds every activation thereafter until the engine is started, if one of the following occur: • A door , sliding door or the liftgate is left open • Any overhead r eading light is left on • If the dimmer control is in the extr eme top positio[...]
-
Page 164
Parade Mode (Daytime Brightness Feature) Rotate the dimmer control to the first detent. This feature brightens the odometer , radio and overhead dis- plays when the park lights or head- lights are on. Dimmer Control W ith the park lights or headlights on, rotating the dimmer contr ol for the interior lights on the instrument panel upward will incr [...]
-
Page 165
Daytime Running Lights (Canada/Fleet V ehicles Only) The headlights on your vehicle will illuminate when the engine is started and the transmission is in any gear except P ARK. This provides a constant lights on condi- tion until the ignition is turned OFF . The lights illuminate at less than 50% of normal intensity . If the parking brake is applie[...]
-
Page 166
NOTE: The engine must be running befor e the head- lights will come on in the Automatic mode. Headlights On with W ipers — If Equipped If your vehicle is equipped with Automatic Headlights it also has this customer programmable featur e. When your headlights are in the automatic mode, and the engine is running, the headlights will automatically t[...]
-
Page 167
If the headlights are turned of f before the ignition, they will turn off in the normal manner . NOTE: The headlights must be turned off within 45 seconds of turning the ignition OFF to activate this feature. Front Fog Lights — If Equipped T o activate the front fog lights, turn on the park lights or the low beam headlights and push in the headli[...]
-
Page 168
Battery Protection This feature pr ovides battery protection to avoid wearing down the battery if the headlights, park lights, or front fog lights are left on for extended periods of time when the ignition switch is in the LOCK position. After eight minutes of the ignition switch being in the LOCK posi- tion and the headlight switch in any position[...]
-
Page 169
If either indicator flashes at a rapid rate, check for a defective outside turn signal light bulb. If one of the indicators fails to light when the lever is moved, it would suggest that the indicator light is defective. Y ou may manually signal a lane change by moving the lever partially up or down. T urn Signal Auto-Mode T ap the multifunction con[...]
-
Page 170
W indshield Wiper and W asher Functions The wipers and washers are operated by a switch within the multifunction lever . Rotate the end of the lever to select the desired wiper speed. NOTE: Always remove any buildup of snow that pr e- vents the windshield wiper blades from r eturning to the off position. If the windshield wiper switch is turned of [...]
-
Page 171
1. Multifunction Lever — Mist, Front W iper and W asher Press the end of the multifunction lever inwar d to the first detent and release to clear the windshield. Pr essing the multifunction lever inward to the second detent will cause the washers to spray for a maximum of 10 seconds, or until the lever is released, and the wipers will cycle three[...]
-
Page 172
the rotary ring fully forwar d and the washers will spray until the ring is released, and then r esume the intermit- tent interval. NOTE: Rear window wipers function in the intermittent wiper speed only . 4. Headlight Low/High Beam Select Switch and Flash-to-Pass Headlight Low/High Beam Select Switch When the headlights are turned on, pushing the l[...]
-
Page 173
TIL T STEERING COLUMN — IF EQUIPPED T o tilt the column, pull the small lever downward (located on the steering column and below the steering wheel) to the open position. Y ou may then position the steering wheel up or down, as desired. Pull the small lever upward to the closed position to lock the steering wheel firmly in place. W ARNING! T ilti[...]
-
Page 174
The Rear Park Assist System will remember the last system state (enabled or disabled) from the last ignition cycle when the ignition is changed to the RUN/ON position. The Rear Park Assist System can be active only when the transaxle gear selector lever is in REVERSE. When in REVERSE, the system scans for objects behind the vehicle using four senso[...]
-
Page 175
When the ignition switch is turned to the RUN/ON position, the warning display will turn on all of its LEDs for about one second. Each side of the warning display has six yellow and two red LED lights, one set to warn of obstacles behind the left rear of the vehicle and the other set to warn of obstacles behind the right rear of the vehicle. The ve[...]
-
Page 176
P ARK ASSIST W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: REAR CENTER AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 78.7 in (200 cm) Y ellow Y es, Half Second 2nd LED 51.1 in (130 cm) Y ellow None 3rd LED 45.2 in (1 15 cm) Y ellow None 4th LED 31.5 in (80 cm) 39.3 in (100 cm) Y ellow None 5th LED 25.5 in (65 cm) 33.5 in (85[...]
-
Page 177
W ARNING! Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. Y ou are responsible for the safety of your surroundings and must con- tinue to pay attention while [...]
-
Page 178
NOTE: • Ensure that the r ear bumper is free of dirt and debris to keep the system operating properly . • Jackhammers, large tr ucks, and other vibrations could affect the performance of the system. Enabling and Disassembling The Rear Park Assist System There ar e times when you may want to disable the Rear Park Assist System, such as when towi[...]
-
Page 179
If ( SER VICE P ARK ASSIST SYSTEM ( appears in the Electronic V ehicle Information Center (EVIC), after mak- ing sure the r ear bumper is clean, please see your authorized dealer . Should this wrench symbol display with the letter P next to it, your Park Sense System needs servicing. Contact your authorized dealer . Cleaning The Rear Park Assist Sy[...]
-
Page 180
Press the button forwar d to move the pedals forward (toward the fr ont of the vehicle). Press the button r earward to move the pedals rearwar d (toward the driver). • The pedals can be adjusted with the ignition OFF . • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electr[...]
-
Page 181
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). Activating Electronic Speed Control Push the ON/OFF button (located in the end of the lever) once and the CRUISE indicator light (located in the message window of the odometer) will illuminate show- ing th[...]
-
Page 182
Setting Electronic Speed Control at a Desired Speed When the vehicle has reached the desir ed speed, press the SET lever downward and then r elease. Lift your foot off the accelerator and the vehicle will operate at the selected speed. Deactivating Electronic Speed Control A soft tap on the brake pedal or pulling the lever CANCEL toward you, will d[...]
-
Page 183
NOTE: The Electronic Speed Contr ol system has been designed to shut down if multiple speed control switch functions are operated simultaneously in or der to ensure proper operation. If this occurs, the system can be reactivated by pushing the speed contr ol switch ON/ OFF button and resetting the desir ed vehicle SET speed. Accelerating T o Pass D[...]
-
Page 184
OVERHEAD CONSOLES Front Overhead Console — If Equipped T wo versions of the overhead console ar e available. The base front over head console models feature fixed incan- descent courtesy/reading lights, flip-down sunglass stor - age and conversation mirror . Premium fr ont overhead console models feature an LED focused light that illuminates the [...]
-
Page 185
Courtesy/Interior Lighting At the forward end of the console ar e two courtesy lights (standard dome light has two buttons). The lights turn on when a front door , a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry , the lights will also turn on when the unlock button on the transmitter is pressed. The c[...]
-
Page 186
Rear Overhead Consoles — If Equipped The rear over head storage system is available in two versions: with or without sunroof. An additional LED at the front of the r ear console shines down on the second row footwell ar ea while in courtesy mode, for added convenience. Overhead Compartment Features 1 — DVD 1 5 — Storage 2 — Rear HV AC 6 —[...]
-
Page 187
Rear Courtesy/Reading Lights — If Equipped The overhead console had two sets of courtesy lights. The lights turn on when a front door , a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry , the lights will also turn on when the unlock button on the transmitter is pressed. The courtesy lights also functi[...]
-
Page 188
The HomeLink t buttons that are located in the headliner or sun visor designate the three dif ferent HomeLink t channels. NOTE: HomeLink t is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or [...]
-
Page 189
W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver . Exhaust gas can cause seri- ous injury or death. PROGRAMMING HOMELINK T Before Y ou Begin If you have not trained any of the HomeLink t buttons, erase all channels before you begin training. T o do this, pre[...]
-
Page 190
W atch for the HomeLink t indicator to change flash rates. When it changes, it is programmed. It may take up to 30 seconds, or longer in rare cases. The garage door may open and close while you train. NOTE: Some gate operators and garage door openers may requir e you to replace Step 3 with procedur es noted in the “Gate Operator/Canadian Programm[...]
-
Page 191
6. Firmly press and release the “Learn” or “T raining” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and press the pr ogrammed HomeLink t button twice (holding the button for two second[...]
-
Page 192
Using HomeLink t T o operate, simply press and r elease the programmed HomeLink t button. Activation will now occur for the trained device (i.e., garage door opener , gate operator , security system, entry door lock, home/office lighting, etc. The hand-held transmitter of the device may also be used at any time. Reprogramming a Single Homelink t Bu[...]
-
Page 193
has successfully accepted the frequency signal. The indicator light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink t ,” earlier in this section. SECURITY It is advised to erase all channels before you sell or tur[...]
-
Page 194
2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly appr oved by the party responsible for compli- ance could void the user ’s authority to operate the device.[...]
-
Page 195
Closing the Sunroof Manually T o close the sunroof fr om an open or vent position, press and hold the switch forward. The sunr oof will close fully and stop automatically . Release the switch to stop sun- roof travel at any point. Sunroof Sunshade Operation The sunroof sunshade can be opened manually . How- ever , the sunshade will open automatical[...]
-
Page 196
Express-V ent Press and r elease the 9 V 9 button, and the sunroof will automatically open to the vent position. This is called Express-V ent. Express-Close Press the switch forwar d and release, and the sunroof will close automatically from any position. The sunr oof will close fully , then stop automatically . This is called Express-Close. During[...]
-
Page 197
open or partially open positions. This is a normal occur- rence and can be minimized. If the buf feting occurs with the rear windows open, open the fr ont and rear windows together to minimize the buffeting. If the buf feting occurs with the sunroof open, adjust the sunr oof opening to minimize the buffeting or open any window . Sunroof Maintenance[...]
-
Page 198
when the overload is removed. The cir cuit breaker also supplies power to the outlet in the removable floor console, when in the front position. Refer to section 3 “Removable Floor Console” in this manual. A third outlet is located on the driver’s side, just to the rear of the sliding door and is also contr olled by the ignition switch. The l[...]
-
Page 199
NOTE: • When the Inverter Switch is pressed, ther e will be a delay of approximately one second befor e the inverter status indicator turns ON. The status indicator of the AC power inverter indicates whether the inverter is producing AC power . • Due to built-in overload protection the inverter will shut down if the power rating is exceeded. W [...]
-
Page 200
ELECTRICAL OUTLET USE WITH ENGINE OFF CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories t[...]
-
Page 201
Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window . Once the screen is completely to the top of the window , extend the top bar of the sun screen over the two hooks attached to the top of the window . T o lower the sun screen, gently lift the tab upwar ds to disengage the [...]
-
Page 202
CUP HOLDERS AND CONVENIENCE TRA Y DRA WER There ar e nine cup holders in the interior . T wo cup holders in the center front instr ument panel, four in the floor consoles and three mor e are located in the third r ow quarter trim panel. All liners are r emovable for cleaning. Pull the flexible liner from the cup holder drawer or tray; starting at o[...]
-
Page 203
Interior Bottle Holders There ar e four bottle holders located in the interior . One bottle holder is molded into each front interior door trim panels, and one bottle holder is molded into each side sliding interior door trim panel. Each holder accommo- dates up to 20 oz. (.6 L) size plastic bottles. T wo outboard mesh pockets on intermediate seati[...]
-
Page 204
• The cup holder/tray top is removable to access a lar ge storage bin. • The Basic Console is removable fr om the vehicle for additional floor space by removing the cap at the console base. T o Remove The Basic Floor Console • Remove the front anchor cup plug and clip. Basic Console Features 1 - Console Anchor 3 - Front Cup holders 2 - T op T[...]
-
Page 205
• Slide the console base forward while lifting slightly to clear the rear load floor hook. • Remove the console. T o Reinstall The Basic Floor Console • Position the console at a slight angle (front slightly higher than the rear . • Slide the console rearwar d into the floor bracket/ hook. • Align the console until the front anchor cup pl[...]
-
Page 206
• T op T ray Storage • Upper Storage Bin can hold nine regular or 18 thin CD’s or other items • Large Console Center Storage will stor e headphones for the available rear DVD entertainment system or other items • 12–V olt DC Power Outlet provides continuous power inside the console for cell phones or other electronics. • Rear Occupant[...]
-
Page 207
The top and center console sections slide forward and rearwar d to provide added user comfort. Four cup hold- ers, each of which can accommodate large sized beverage containers. A one-piece cup holder insert for both cavities can easily be removed for cleaning. The cup holders will also accommodate large size cups and 20 oz (.6 L) bottles. Position[...]
-
Page 208
Position 2 shows the raised storage tray revealing a lar ge storage area below . Dual Storage Bins Position 3 shows the top portion of the console in a rearwar d position. This is accomplished by lifting the upper most latch at the front of the console. This pr ovides easy access to the storage area below and pr ovides two of the four cup holders f[...]
-
Page 209
T o Remove The Premium Floor Console • Pull up on the bottom release handle in the fr ont of the console • Lift the rear of the console up several inches • Pull rearwar d to disengage from floor and remove console T o reinstall the console: • Position the console at a slight angle (rear slightly higher than the front • Slide the console f[...]
-
Page 210
W ARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched. STORAGE Glove Compartments There ar e both upper and lower glove compartments. Upper Glove Compartment T o open the upper compartment (4), press inwar d on the release button (3[...]
-
Page 211
Lower Glove Compartment T o open the lower compartment (1) pull out on the release handle (2). The lower compartment handle is also equipped with a lock. Door T rim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage. Front Door Storage 1 - Rear Map Pocket 3 - Bottle Holder 2 - Storage Pocket 4 - Front[...]
-
Page 212
Sliding Side Door Bottle Holder Both sliding doors have a bottle holder molded right into the trim. Second Row Floor Storage Bins — If Equipped The Second Row Seat Storage Bins are located on the floor in front of the second r ow seats. The area below the floor covers can be used for storage when the second row seat is in the upright position. Sl[...]
-
Page 213
Pull up on the storage bin latch to open the cover . Slide the storage bin locking mechanism to the 9 unlocked 9 position to allow greater access to the storage bin. CAUTION! The storage bin cover must lay flat and be locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover . W ARNING! In an accident[...]
-
Page 214
T o remove the console use the following pr ocedure: 1. Open the console lid and remove the storage tray . 2. Pull up on the release handle located inside the floor console, and slide the console rearwar d to disengage from the floor . 3. Remove the floor console. T o reinstall the console use the following pr ocedure: 1. Open the console lid and r[...]
-
Page 215
W ARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched. Rear Compartment Storage Y our vehicle is equipped with open storage areas located in each rear trim panel. Third Row Rear Seat and Rear Compartment Features 1 — T ie Down 5 ?[...]
-
Page 216
Coat Hooks Coat hooks are located along the headliner for the second and third r ow seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage fr om the vehicle. Cargo Area Storage The seats in your vehicle are in-line which enables you to stow long objects, su[...]
-
Page 217
ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails ar e designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Distribute cargo weight evenly on the r oof rack crossbars. The roof rack does not incr ease the tota[...]
-
Page 218
CAUTION! • Crossbars should remain equally spaced or paral- lel at any luggage rack position for proper func- tion. Noncompliance could result in damage to the luggage rack, cargo and/or vehicle. • T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg). Always distribute heavy loads a[...]
-
Page 219
W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack. UMBRELLA HOLDER An umbrella holder has been conveniently molded into the left front [...]
-
Page 220
LOAD-LEVELING SYSTEM — IF EQUIPPED The automatic load-leveling system will provide a level riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the corr ect height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete dep[...]
-
Page 221
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panels And Controls ............ 2 2 3 m Base Instrument Cluster .................. 2 2 4 m Premium Instr ument Cluster ............... 2 2 5 m Instrument Cluster Descriptions ............ 2 2 6 m Compass Mini-T rip Computer (CMTC) — If Equipped ........................... 2 3 8 ▫ Comp[...]
-
Page 222
m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) .................. 2 5 2 ▫ Operating Instructions - Radio Mode ....... 2 5 2 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) .... 2 6 0 ▫ Notes On Playing MP3/WMA Files ........ 2 6 2 ▫ List Button (Disc Mode For MP3/WMA [...]
-
Page 223
m Sales Code RER — Multimedia System — If Equipped ........................... 2 8 3 ▫ Operating Instructions — Satellite Radio ..... 2 8 4 ▫ Operating Instructions — Hands-Fr ee Communication (UConnect t ) (If Equipped) . . . 284 ▫ Clock Setting Procedur e................. 2 8 5 m Satellite Radio — If Equipped (REN/REQ/RER/RES/REU [...]
-
Page 224
m Radio Operation And Cellular Phones ........ 2 9 9 m Remote Sound System Controls — If Equipped . . 299 ▫ Radio Operation ...................... 2 9 9 ▫ CD Player .......................... 3 0 0 m CD/DVD Maintenance ................... 3 0 0 m Climate Controls ....................... 3 0 1 ▫ Manual Heating, V entilation And Air Condition[...]
-
Page 225
INSTRUMENT P ANELS AND CONTROLS 1 - Air V ents 6 - Upper Glove Compartment 1 1 - Storage Bin 16 - Head Light Switch 2 - Instrument Cluster 7 - Lower Glove Compartment 12 - Power Supply 12V 17 - Power Inverter Switch 3 - Gear Selector Lever 8 - Climate Controls 13 - Hazard Switch 4 - Radio 9 - Storage or DVD 14 - Ignition Switch 5 - Storage Bin 10 -[...]
-
Page 226
BASE INSTRUMENT CLUSTER 224 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]
-
Page 227
PREMIUM INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 225 4[...]
-
Page 228
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Fuel Door Reminder The arrow in this symbol is a r eminder that the Fuel Filler Door is located on the left side of the vehicle. 3. T emperature Gauge The temperature gauge shows engine coolant temper[...]
-
Page 229
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pres- sure Cap paragraph. 4. Speedometer[...]
-
Page 230
If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer . 8. Brake System W arning Light This light monitors various brake functions, includin[...]
-
Page 231
Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. The operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn off unless the parking b[...]
-
Page 232
replacement, be sur e to keep a record of the r eading before and after the service so that the corr ect mileage can be determined. The trip odometer shows individual trip mileage. T o switch from odometer to trip odometer , press the T rip Odometer button. T o reset a trip odometer , display the desired trip odom- eter to be reset then push and ho[...]
-
Page 233
seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle-based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to th[...]
-
Page 234
15. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors engine and automatic transmission control systems. The light will illu- minate when the key is in the ON position before engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked pr omptly . Ce[...]
-
Page 235
requir e towing. The light will come on when the ignition is first turned ON and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer . 18. Oil Pressur e W arning Light This light shows low engine oil pressur e. The light should turn on momentarily when the engine is start[...]
-
Page 236
during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible. 23. V oltage Light This light monitors the electrical system voltage. The light should turn on momentarily as the engine is started. If the light stays on or turns on while driving, it indicates a problem with the char ging s[...]
-
Page 237
reduces fuel ef ficiency and tire tread life, and may af fect the vehicle’s handling and stopping ability . NOTE: Please note that the TPMS is not a substitute for proper tir e maintenance, and it is the driver ’s responsi- bility to maintain correct tir e pressure, even if underin- flation has not reached the level to trigger illumination of t[...]
-
Page 238
For additional information on TPMS, refer to Section 5 — Starting and Operating, “T ire Pr essure Monitoring Sys- tem” of this manual. For additional information on T ire Pr essures, refer to Section 5 — Starting and Operating, “T ire Inflation Pressur es” of this manual. 26. Electronic Stability Pr ogram (ESP) Indicator Light The malfu[...]
-
Page 239
Electronic V ehicle Information Center (EVIC) Display — If Equipped The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the lower half of the speedometer . Oil Change Required Y our vehicle is equipped with an engine oil change indicator system. The Oil Change Required message will flash i[...]
-
Page 240
COMP ASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED NOTE: The compass on your vehicle is self-calibrating, eliminating the need to manually calibrate the compass. The Compass Mini-T rip Computer features a driver - interactive display (displays information on outside tem- perature, compass dir ection, and trip information). It is located in the inst[...]
-
Page 241
T o reset the display shown, turn the ignition switch to the ON position, then press and hold the r eset button for approximately two seconds. When the appropriate conditions exist, the following odometer messages will display: NE ....... Eight-point compass headings are display ed (N, S, E, W , NE, NW , SE, SW) 14°F ............ T emper ature (F [...]
-
Page 242
Compass/T emperature Display Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. In or der to ensure compass accuracy , the com- pass variance should be prop[...]
-
Page 243
2. Press and hold (appr oximately 10 seconds) the CMTC reset button until the curr ent variance zone number is displayed. 3. Release the CMTC reset button, then pr ess and hold again (approximately 10 seconds), until the dir ection is displayed with the CAL indicator on continuously in the display . 4. T o complete the compass calibration, drive th[...]
-
Page 244
• Compass display • Outside temperature display • T rip computer functions • Audio Modes display EVIC Menu / Step Control Button as it appears on the left side of the steering column. Press and r elease the MENU button and the mode displayed will change between Compass/T emperature, T rip, System Status, and Personal Settings. Press the STE[...]
-
Page 245
EVIC Displays When the appropriate conditions exist, the EVIC displays the following messages: • Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (chime will sound when vehicle starts moving) • Hood Ajar (If equipped with hood switch) • Check TPM System. Refer to “T ire Pr essure Monitor- ing System” in Section[...]
-
Page 246
Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the Menu button. T o reset the oil change indicator system (after performing the scheduled maintenance) refer to the following pr ocedure. 1. T urn the ignition switch to the ON [...]
-
Page 247
Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the a[...]
-
Page 248
COMP ASS DISPLA Y The compass readings indicate the dir ection the vehicle is facing. Press and r elease the compass button to display one of eight com- pass readings and the outside temperatur e. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new , the co[...]
-
Page 249
Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. For the most accurate compass performance, the compass variance must be set using the following procedur [...]
-
Page 250
1. T urn the ignition switch ON. 2. Press and hold the compass button for appr oximately two seconds. 3. Press the STEP button until “Compass V ariance” mes- sage and the last variance zone number displays in the EVIC. 4. Press and r elease STEP button until the proper vari- ance zone is selected according to the map. 5. Press and r elease the [...]
-
Page 251
Unlock Doors Automatically on Exit When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the P ARK or NEUTRAL position and the driver’s door is opened. T o make your selection, press and r elease the RESET button until ON or OFF appears. Remote Key Unlock When Driver Door 1st Press is selected, only the[...]
-
Page 252
SELECT button until YES (Y) or NO (N) appears. Refer to “Lights/SmartBeams — If Equipped” in Section 3 of this manual for more information. Headlights On with W ipers (A vailable with Auto Headlights Only) When YES (Y) is selected, and the headlight switch is in the AUTO position, the headlights will turn on approxi- mately 10 seconds after t[...]
-
Page 253
Rear Park Assist System — If Equipped When ENABLE is selected, the Rear Park Assist System is activated. When DISABLE is selected, the System is deactivated and, the instrument cluster will display the 9 P ARK ASSIST DISABLED 9 message. Display Units of Measure in The EVIC, odometer , and navigation system (if equipped) can be changed between Eng[...]
-
Page 254
FM Reception Because FM transmission is based on frequency varia- tions, interference that consists of amplitude variations can be filtered out, leaving the r eception relatively clear , which is the major feature of FM radio. NOTE: The radio, steering wheel radio controls (if equipped), and six-disc CD/DVD changer (if equipped) will remain active [...]
-
Page 255
When the audio system is turned on, the sound will be set at the same volume level as last played. SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selecti[...]
-
Page 256
TIME Button Press the TIME button and the time of day will display . In AM or FM mode, pressing the TIME button will switch between the time and frequency displays. Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side T une/Scroll control knob. 3. After adjusting the hours, p[...]
-
Page 257
Setting the T one, Balance, and Fade Push the rotary T une/Scroll control knob and BASS will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the bass tones. Push the rotary T une/Scroll control knob a second time and MID will display . T urn the T une/Scr oll control knob to the right or left to increase [...]
-
Page 258
Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Program T ype 16-Digit Character Display Rhythm a[...]
-
Page 259
station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset station. SETUP Button Pressing the SETUP button allows you to select between the followi[...]
-
Page 260
NOTE: These selections can only be made while playing a DVD. • VES t Power - Allows you to turn VES t on and off (if equipped). • VES t Lock - Locks out rear VES t r emote controls (if equipped). • VES t CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2, wireless headphones by pressing the AUDIO/SELECT button (if equipped)[...]
-
Page 261
Subtitle Language — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). Y ou can select a language not listed by scrolling down and selecting 9 other . 9 Enter the country code using the T une/Scroll contr ol knob to scroll up and down to select the number and[...]
-
Page 262
SET Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five seconds afte[...]
-
Page 263
CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components. NOTE: The ignition switch must be in the ON or ACC position to operate th[...]
-
Page 264
Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF . SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to r eturn to the beginning of the current selection, or r eturn to the beginning of the[...]
-
Page 265
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats[...]
-
Page 266
When using the MP3/WMA encoder to compress audio data to an MP3/WMA file, the bit rate and sampling frequencies in the following table ar e supported. In addition, V ariable Bit Rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MP3 File Format MPEG Specification Samp[...]
-
Page 267
Loading times for playback of MP3/WMA files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed o[...]
-
Page 268
Press and hold the INFO button again for thr ee seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player , cassette player , or microphone and utilize the vehicle’s audio system to amplify th[...]
-
Page 269
Operating Instructions — V oice Recognition System (VR) (If Equipped) For the radio, refer to “V oice Recognition System (VR)” in Section 3. For UConnect t “V oice Recognition System (VR)” refer to “Hands-Free Communication (UConnect t )” in Section 3. Operating Instructions - Hands-Free Phone (UConnect t ) — If Equipped Refer to ?[...]
-
Page 270
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V olume control knob to tu[...]
-
Page 271
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to sear ch for the next listenable station in AM or FM frequencies, pausing for five sec[...]
-
Page 272
2. Adjust the hours by turning the right side T une/Scroll control knob. 3. After adjusting the hours, press the right side T une/ Scroll contr ol knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une/Scroll control knob. Pr ess the T une/Scroll control knob to save time change. 5. T o exit, pres[...]
-
Page 273
Push the rotary T une/Scroll control knob a second time and MID will display . T urn the T une/Scr oll control knob to the right or left to increase or decr ease the mid-range tones. Push the rotary T une/Scroll control knob a thir d time and TREBLE will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the[...]
-
Page 274
Program T ype 16-Digit Character Display Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Sof tR&B Program T ype 16-Digit C[...]
-
Page 275
SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. T urn the T une/Scroll contr ol knob to adjust the hours and then press and turn the T une/Scroll contr ol knob to adjust the minutes. Press the T une/Scroll contr ol knob again to sa[...]
-
Page 276
DISC Button Pressing the DISC button will allow you to switch fr om AM/FM modes to Disc modes. Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable com- pact [...]
-
Page 277
CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (on[...]
-
Page 278
TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or RW or another CD button is p[...]
-
Page 279
files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats ar e not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of [...]
-
Page 280
rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80[...]
-
Page 281
LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the T une/Scroll contr ol knob. Selecting a folder by pressing the T une/Scroll control knob will begin playing the files contained in that folder (or the next folder in sequence if the select[...]
-
Page 282
TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnect t ) (If Equipped) Refer to “Hands-Free Communication (UConnect t )” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipp[...]
-
Page 283
through the system’s wir eless headphones. This means rear seat passengers can watch a DVD on the optional rear seat entertainment system, while the driver and front-seat passenger listen to the radio. Other special features include dir ect tune, music type selections, easy store pr esets, backup camera display for vehicles equipped with a backup[...]
-
Page 284
3. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- played. T o move the hour backward, touch the scr een where the wor d “Hour” with the arrow pointing down- ward is displayed. 4. T o move the minute forward, touch the scr een where the word “Min” with the arr ow pointing upward[...]
-
Page 285
T ouch the screen wher e the words “Show T ime if Radio is Off” ar e displayed to change the current setting. Changing the T ime Zone 1. T urn on the multimedia system. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen wher e the words “Set T ime Zone” are displayed. Th[...]
-
Page 286
The satellite navigation capability combines a Global- Positioning System (GPS)-based navigation system with an integrated color screen to pr ovide maps, turn identi- fication, selection menus, and instructions for selecting a variety of destinations and routes. A shared HDD for the navigation system, the database, and other radio features allows u[...]
-
Page 287
Clock Setting Procedure The GPS receiver in this system is synchr onized to the time data being transmitted by the GPS satellites. The satellites’ clock is Greenwich Mean T ime (GMT). This is the worldwide standard for time. This makes the sys- tem’s clock very accurate once the appropriate time zone and daylight savings information is set. Cha[...]
-
Page 288
3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen wher e the words “Daylight Savings” are dis- played to change the current setting. Setting the User Clock If you wish to set the clock to a time differ ent from the system clock, you can manually adjust the time by perform[...]
-
Page 289
2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Show T ime if Radio is Off.” T ouch the screen wher e the words “Show T ime if Radio is Off” ar e displayed to change the current setting. SA TELLITE RADIO ?[...]
-
Page 290
T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith REQ/RES Radios W ith the ignition switch in the ON/RUN or ACC posi- tion and the radio on, press the SETUP button and scroll using the T une/Scroll contr ol knob until Sirius ID is selected. Press the T une/Scroll control knob and the Sirius ID number will display . The Siri[...]
-
Page 291
Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent [...]
-
Page 292
additional three seconds will make the radio display the Song T itle all of the time (press and hold again to r eturn to normal display). INFO Button — REU Radio Pressing the INFO button will display information about Artist, Song T itle, and Composer (if available). Pressing the INFO button again will close the INFO screen. R W/FF Pressing the R[...]
-
Page 293
Pressing the MUSIC TYPE button again will close the MUSIC TYPE screen. Once closed, seek up, seek down, and scan will no longer be based on your selection. SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is [...]
-
Page 294
Operating Instructions - Hands-Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect t )” in Section 3. Operating Instructions - Video Entertainment System (VES T ) (If Equipped) Refer to separate “V ideo Entertainment System (VES t ) Guide.” UNIVERSAL CONSUMER INTERF ACE (UCI) — IF EQUIPPED NOTE: This section is for sales[...]
-
Page 295
Connecting The iPod T Device Use the optional connection cable to connect an iPod t to the vehicle’s UCI connector (which is located in the glove box or center console on some vehicles. This location may vary with vehicle). Once the iPod t is connected and synchronized to the vehicle system (this may take a few seconds to connect), the vehicle br[...]
-
Page 296
R W (Rewind) Button Press and hold the R W button to move backward in the current track. Holding the R W button long enough will take you back to the beginning of the current track. Pressing and r eleasing the RW button will go back five seconds of the current track. FF (Fast Forward) Button Press and hold the FF button to move forwar d in the curr[...]
-
Page 297
SCAN Button Pressing the SCAN button will play the first five seconds of each track in the current list and then forwar d to the next song. T o stop the SCAN mode and start playing the desired track, pr ess the SCAN button again. During the SCAN mode, you can also press the SEEK button to the left or right to go to the previous or next tracks. RND [...]
-
Page 298
Radio Preset Buttons In the List mode, the radio preset buttons ar e used as shortcuts to the following lists on the iPod t device. • 1 – Playlists • 2 – Artists • 3 – Albums • 4 – Genres • 5 - Audiobooks • 6 – Podcasts After pressing a pr eset button, you will see the list you are in on the top line and the first item in that[...]
-
Page 299
SIRIUS BACKSEA T TV™ — IF EQUIPPED Satellite video uses direct satellite r eceiver broadcasting technology to provide str eaming video coast to coast. The subscription service provider is SIRIUS Satellite Radio. SIRIUS Backseat TV™ offers thr ee video channels for family entertainment, directly fr om its satellites and broadcasting studios. N[...]
-
Page 300
• Nine differ ent medias to choose from in each screen (AM, FM, Sirius Radio, DVD1, DVD2, Hard Drive Jukebox, AUX in radio, AUX1, AUX2). The LCD screen(s) ar e located in the overhead compart- ment console. NOTE: Refer to your VES t User’s Manual for detailed operating instructions. Overhead V ideo Screens VES t Remote Control Location 298 UNDE[...]
-
Page 301
RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]
-
Page 302
CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play . If you press the switch up or down twice it plays the second track, thre[...]
-
Page 303
CLIMA TE CONTROLS The Climate Control System allows you to r egulate the temperature, amount, and dir ection of air circulating throughout the vehicle. The contr ols are located on the instrument panel, below the radio. MANUAL HEA TING, VENTILA TION AND AIR CONDITIONING (HV AC) SYSTEM The controls for the manual HV AC system in this vehicle consist[...]
-
Page 304
Front Blower Control There ar e four blower speeds. Use this control to r egulate the amount of air forced thr ough the system in any mode you select. The blower speed increases as you move the contr ol clockwise from the of f position. T emperature Control Use this control to r egulate the tem- perature of the air inside the passenger compartment.[...]
-
Page 305
P ANEL Mode Air is directed thr ough the outlets in the instrument panel. These outlets can be adjusted to direct airflow . BI-LEVEL Mode Air is directed thr ough the panel and floor outlets. NOTE: There is a dif ference in temperature (in any conditions other than full cold or full hot), between the upper and lower outlets for added comfort. The w[...]
-
Page 306
RECIRCULA TION Control Press this button to choose between outside air intake or recir culation of the air inside the vehicle. A lamp will illu- minate when you are in RE- CIRCULA TION mode. Only use the RECIRCULA TION mode to temporarily block out any outside odors, smoke, or dust and to cool the inte- rior rapidly upon initial start up in very ho[...]
-
Page 307
ECONOMY Mode If ECONOMY mode is desir ed, press the A/C button to turn off the indicator light and the A/C compressor . Rotate the temperature contr ol knob to the desired tem- perature. Air Conditioning Operation Push on this button to engage the Air Conditioning. A light will illuminate when the A/C System is engaged NOTE: The air conditioning co[...]
-
Page 308
The Three Zone Basic T emperature Control bottom panel controls r ear Heating, V entilation, and Air Conditioning (HV AC) operations. Three Zone T emperature Control 1 — Left T emp 7 — Right T emp 2 — P ANEL 8 — Rear DEFROST 3 — BI-LEVEL 9 — RECIRCULA TE 4 — BLOWER 10 — Front DEFROST 5 — FLOOR 1 1 — A/C 6 — MIX Front Lower Thr[...]
-
Page 309
The primary control for the r ear blower is on the front climate control unit located on the instr ument panel. The front climate contr ol unit has five positions, off, rear , and a range of blower speeds. Only when the primary control for the r ear blower is in the REAR position do the second seat occupants have control of the r ear blower speed. [...]
-
Page 310
Only when the front contr ol for the rear blower is in the RR position do the second seat occupants have control of the rear blower speed. The rear blower contr ol, located in the rear overhead console has an off position and a range of blower speeds. This allows the second seat occupants to control the volume of air circulated in the r ear of the [...]
-
Page 311
control is in FLOOR, DEFROST , or MIX modes, airflow will be directed out of the r ear floor outlets. Rear Mode Control FLOOR Mode Air comes from the floor outlets. BI-LEVEL Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the BI-LEVEL mode is designed to provide cooler air out of the head- [...]
-
Page 312
The Infrared Thr ee-Zone A TC System automatically maintains the interior comfort level desired by the driver and all passengers. This is accomplished by an infrared sensor , located in the forward overhead console. Based on the sensor input, the system automatically adjusts the air temperature, the airflow volume, and amount of outside air recir c[...]
-
Page 313
Below the automatic control, the system selects the appropriate mode (airflow outlets) and fan speed. Operation of the system is quite simple. 1. Press the AUTO button and the wor d AUTO will illuminate in the front A TC display , along with three temperatures for Driver’s, Passenger , and Rear seats. The system will then automatically regulate t[...]
-
Page 314
NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to pr ovide comfort as quickly as possible. • The temperature can be displayed in U.S. or Metric by selecting the US/M customer programmable featur e. Refer to the “Customer Programmable F[...]
-
Page 315
P ANEL Mode Air comes from the outlets in the instr ument panel. Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vanes of the center outlets down, will close off the airflow fr om the center outlets. The thumbwheel next to the outboard outlets can be rotated to r egulate or shut off the airflow from the[...]
-
Page 316
The SNOWFLAKE mode or A/C button allows the operator to manually activate or deactivate the air conditioning system. When in SNOWFLAKE mode the A TC display is on, cool, dehumidified air flows through the air outlets. If ECONOMY mode is desired, press the SNOWFLAKE button to turn of f the SNOW - FLAKE mode in the A TC display and deactivate the A/C[...]
-
Page 317
The REAR SYSTEM control for the Rear A TC System is on the front A TC control unit located on the instrument panel. Pressing the REAR LOCK button for the Rear A TC System from the fr ont A TC control unit, illuminates a LOCK symbol in the rear display . The rear temperatur e and air source ar e controlled from the fr ont A TC control unit. Rear sec[...]
-
Page 318
Operation of the rear system is quite simple. 1. Press the REAR LOCK button on the fr ont A TC control unit. This turns off the REAR LOCK icon in the r ear temperature knob. 2. Rotate the Rear Blower , Rear T emperature and the Rear Mode Control knobs to suit your comfort needs. 3. A TC is selected by adjusting the rear blower knob counterclockwise[...]
-
Page 319
CAUTION! Interior air enters the Rear Automatic T emperature Control System through an intake grille located in the passenger side trim panel behind the third seat. The heater outlets are located in the passenger side trim panel just behind the sliding door . Do not block or place objects directly in front of the inlet grille or heater outlets. The[...]
-
Page 320
HEADLINER Mode Air comes from the outlets in the headliner . Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vanes of the outlets to one side will shut off the airflow . SUMMER OPERA TION The engine cooling system in air conditioned vehicles must be protected with a high-quality antifr eeze coolant to p[...]
-
Page 321
OUTSIDE AIR INT AKE Make sure the air intake, located dir ectly in front of the windshield, is free of obstr uctions such as leaves. Leaves collected in the air intake may reduce airflow and if they enter the plenum they could plug the water drains. In winter months make sure the air intake is clear of ice, slush and snow . OPERA TING TIPS UNDERST [...]
-
Page 322
A/C AIR FIL TER — IF EQUIPPED On vehicles equipped with Automatic T emperature Con- trol (A TC), the climate control system filters out dust and pollen from the air . Refer to Section 7 “Air Conditioning” for filter replacement instr uctions. ELECTRIC REAR WINDOW DEFROSTER — IF EQUIPPED Press this button (located on your fr ont climate cont[...]
-
Page 323
ST ARTING AND OPERA TING CONTENTS m Starting Procedur es ..................... 3 2 4 ▫ Automatic T ransmission ................ 3 2 5 m Engine Block Heater — If Equipped ......... 3 2 7 m Automatic T ransmission .................. 3 2 8 ▫ Brake/T ransmission Interlock System ....... 3 2 8 ▫ Four-Speed Or Six-Speed Automatic T ransmission ..[...]
-
Page 324
▫ Flowing/Rising W ater .................. 3 4 6 m T ire Safety Information ................... 3 4 8 ▫ T ire Markings ........................ 3 4 8 ▫ T ire Loading And T ire Pressur e ........... 3 5 3 m T ires — General Information ............... 3 5 7 ▫ T ire Pr essure ......................... 3 5 7 m T ire Chains ..................[...]
-
Page 325
▫ Maintenance ......................... 3 8 8 m V ehicle Loading ........................ 3 8 8 ▫ V ehicle Certification Label ............... 3 8 9 m T railer T owing ......................... 3 9 3 ▫ Common T owing Definitions ............. 3 9 3 ▫ T owing T ips ......................... 4 0 5 m Recreational T owing (Behind Motorhome, Etc[...]
-
Page 326
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! NEVER leave unattended children alone in a vehicle. Leaving children in a vehicle is dangerous for a number of reasons. A child or othe[...]
-
Page 327
Automatic T ransmission The gear selector lever must be in the NEUTRAL or P ARK position before you can start the engine. Depr ess the brake pedal before shifting into any driving gear . Normal Starting (Above 32°F/0°C) 1. DO NOT depress the accelerator . 2. Use the Fob with Integrated Key to briefly turn the ignition switch to the ST ART positio[...]
-
Page 328
If The Engine Fails T o Start W ARNING! • NEVER pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . • DO NOT attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission ca[...]
-
Page 329
If the engine shows no sign of starting after two 15– second intervals of cranking with the accelerator pedal held to the floor , the “Normal Starting” procedure should be repeated. After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolan[...]
-
Page 330
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift the gear selector lever into P ARK only after the vehicle has come to a complete stop. • Do not shift the gear selector lever from RE- VERSE, P ARK, or NEUTRAL into any forward gear when the engine is above idle speed. [...]
-
Page 331
while the ignition switch is in the ON position. Always press the brake pedal first befor e moving the gear selec- tor lever out of P ARK. Automatic T ransmission Ignition Interlock System For electrical system malfunctions, there is an override for the interlock system. In order to override this system, remove the cover located to the top right of[...]
-
Page 332
the instrument cluster will display transmission gear selection as 6, 5, 4, 3, 2, 1 for six-speed and 4, 3, 2, 1 for four-speed transmissions. Gear Ranges DO NOT race the engine when shifting the gear selector lever from P ARK or NEUTRAL positions into another gear range. P ARK Shifting the gear selector lever in P ARK supplements the parking brake[...]
-
Page 333
W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the gear selector lever into P ARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from th[...]
-
Page 334
REVERSE Use REVERSE for moving the vehicle rearwar d. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL Shift the gear selector lever into this gear only after the vehicle has come to a complete stop. The engine may be started in this range. W ARNING! Do not coast in NEUTRAL and never turn of f the ignition to coast dow[...]
-
Page 335
under heavy loading conditions, (i.e., in hilly terrain, traveling into strong head winds or while towing heavy trailers). Under these conditions, using the “3” range will improve performance and extend transmission life by reducing excessive shifting and heat build-up. CAUTION! If the transmission operating temperature exceeds acceptable limit[...]
-
Page 336
Odometer Screen Display 1 234 5 6D Actual Gear(s) Allowed —Six- Speed T rans- mission 1 1-2 1-3 1-4 1-5 1-6 1-6 Actual Gear(s) Allowed —Four-Speed T ransmission 1 1-2 1-3 1-4 N/A N/A 1–4 NOTE: T o select the proper gear position for maximum deceleration (engine braking), simply press and hold the gear selector lever to the left (-). The trans[...]
-
Page 337
5. Shift into the desired gear range and r esume driving. NOTE: Even if the transmission can be reset, it is recommended that you visit an authorized dealer at your earliest possible convenience. Y our authorized dealer has diagnostic equipment to determine if the problem could recur . If the transmission cannot be reset, authorized dealer service [...]
-
Page 338
before placing the gear selector lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the gear selector lever out of P ARK. W ARNING! • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury . Also be certain to leave an automatic transmission i[...]
-
Page 339
BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. However , there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal for ce required t[...]
-
Page 340
ANTI-LOCK BRAKE SYSTEM (ABS) ABS provides incr eased vehicle stability and brake per- formance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice,[...]
-
Page 341
W ARNING! • The Anti-Lock Brake System cannot prevent acci- dents, including those resulting from excessive speed in turns, following another vehicle too closely , or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous m[...]
-
Page 342
to the ABS system is requir ed. Consult with your autho- rized dealer service center as soon as possible. ELECTRONIC BRAKE CONTROL SYSTEMS Y our vehicle is equipped with an advanced electronic brake control system that includes TCS (T raction Control System), BAS (Brake Assist System) and ESP (Electronic Stability Program). These systems complement[...]
-
Page 343
W ARNING! • The TCS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase the traction afforded. • The TCS cannot prevent accidents, including those resulting from excessive speed in turns, or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of a TCS-e[...]
-
Page 344
W ARNING! • BAS (Brake Assist System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevail- ing road conditions. • BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentiv[...]
-
Page 345
ESP ON This is the normal operating mode for ESP on 2WD vehicles. Whenever the vehicle is started, the ESP system will be in this mode. This mode should be used for most driving situations. ESP should only be turned of f for specific reasons as noted below . ESP Partial OFF This mode is entered by momentarily depr essing the ESP OFF switch (located[...]
-
Page 346
Light comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles/ kilometers at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagno[...]
-
Page 347
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to t[...]
-
Page 348
TRACTION When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and r oad surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precau- tions should be observed: 1. Slow down during rainstorms [...]
-
Page 349
Shallow Standing W ater Although your vehicle is capable of driving through shallow standing water , consider the following Caution and W arning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehic[...]
-
Page 350
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances. Therefore, after driving through standing water , drive slowly and[...]
-
Page 351
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidew[...]
-
Page 352
T ire Sizing Chart T ire Sizing Chart P Passenger Car tire size based on U.S. design standar ds ( ....blank.... ( Passenger Car tire based on Eur opean design standards LT Light T ruck tire based on U.S. design standar ds T T emporary spare tir e 31 Overall diameter in inches (in) 215 Section width in millimeters (mm) 65 Aspect Ratio of section hei[...]
-
Page 353
T ire Sizing Chart H A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pr essure, vehicle loading, road conditions, and posted speed li[...]
-
Page 354
T ire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle[...]
-
Page 355
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weig[...]
-
Page 356
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the T ire and Loading Information placard and in the “V ehicle Loading”[...]
-
Page 357
amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing[...]
-
Page 358
356 ST ARTING AND OPERA TING[...]
-
Page 359
2W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory [...]
-
Page 360
W ARNING! • Unequal tire pressures can cause steering problems. Y ou could lose control of your vehicle. • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. 2. Economy— Improper inflat[...]
-
Page 361
The pressur e should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pr essure. DO NOT make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After[...]
-
Page 362
T ire pr essures change by approximately 1 psi (7 kPa) per 12 F (7 C) of air temperature change. Keep this in mind when checking tire pr essure inside a garage, especially in the winter . Example: If garage temperature = 68°F (20°C) and the outside temperature = 32°F (0°C) then the cold tir e inflation pressur e should be increased by 3 psi (21[...]
-
Page 363
Radial-Ply T ires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial ply tires in sets of four (or 6, in case of trucks with dual rear wheels). NEVER combine them with other types of tires. Cuts and punctures in radial[...]
-
Page 364
DO NOT install a wheel cover or attempt to mount a conventional tire on the compact spar e wheel, since the wheel is designed specifically for the compact spare. DO NOT install more than one compact spar e tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, DO NOT take your vehicle through an automatic car[...]
-
Page 365
W ARNING! • Keep the limited use spare tire inflated to the cold tire inflation pressure listed on either your tire placard or limited use spare tire and wheel assem- bly . • Replace (or repair) the original tire at the first opportunity and reinstall it on your vehicle. Fail- ure to do so could result in loss of vehicle control. T ire Spinning[...]
-
Page 366
T read W ear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be r eplaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tir e [...]
-
Page 367
Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Pr otect tires from contact with oil, grease, and gasoline. Replacement T ires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressure. The manu- facturer st[...]
-
Page 368
W ARNING! • NEVER use a tire with a smaller load index or capacity , other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. Y ou could lose control and have an accident. • Failure to equip your vehicle with tires having adequate speed capability can result in[...]
-
Page 369
TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as r ecommended by the chain manufacturer . NOTE: Do not use tire chains on a compact spar e tire. CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • Bec[...]
-
Page 370
Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufactur e suggest a maximum speed. This notice applies to all chain traction devices, including link and cable (radial) chains. SNOW TIRES Some areas of the country r equire the use of snow tires during W inter . Standard tires ar e of the all-season type a[...]
-
Page 371
The suggested rotation method is the “forwar d-cross” shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pr essure based on the cold inflation tire pr essure requir ements found on the tire placar d located on the driver’s-side B-pillar . The tire pr essure will vary with temperatur[...]
-
Page 372
increased to the r ecommended cold tire placard pr essure in order for the TPMS warning lamp to be turned of f. The system will automatically update and the TPMS warning lamp will extinguish once the updated tire pr essures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information.[...]
-
Page 373
CAUTION! After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent mois- ture and dirt from entering the valve stem, which could damage the TPMS SENSOR. NOTE: • The TPMS is not intended to replace normal tir e care and maintenance, or to provide warning of a tir e failure or condition. • The TPMS sho[...]
-
Page 374
The Basic TPMS consists of the following components: • Receiver Module • Four Wheel Sensors • TPMS T elltale W arning Light The TPMS T elltale W arning Light will illumi- nate in the instrument cluster , and an audible chime will be activated when one or more of the four active road tir e pressures ar e low . Should this occur , you should st[...]
-
Page 375
NOTE: 1. The compact spare tir e (if equipped) does not have a TPMS sensor . Therefore the TPMS will not monitor the pressur e in the compact spare tire. 2. If you install the compact spare tir e in place of a road tire that has a pr essure below the low-pressur e warning limit, upon the next ignition key cycle, a chime will sound and the TPMS T el[...]
-
Page 376
• Three T rigger Modules (mounted in three of the four wheel wells) • V arious TPMS Messages, which display in the Elec- tronic V ehicle Information Center (EVIC), and graph- ics displaying tire pr essures • Y ellow TPMS T elltale W arning Light TPMS Low Pressure W arnings The TPMS T elltale W arning Light will illuminate in the instrument cl[...]
-
Page 377
Should a low tire condition occur on any of the four active road tir e(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tir e pressure value. The system will automatically update, the graphic display of the pressur e value(s) will stop flashing, and the [...]
-
Page 378
will not be present, and a pr essure value will be dis- played instead of dashes. A system fault can occur by any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signal[...]
-
Page 379
5. Once you repair or r eplace the original road tire, and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically . In addition, the TPMS T elltale W arning Light will turn off and the graphic in the EVIC will display a new pressur e value instead of dashes (- -), as long no tire pr essure is below the low pr[...]
-
Page 380
gasolines, and in some circumstances may r esult in poorer performance. 4.0L Gasoline Engine The 4.0L engine is designed to meet all emissions regulations and pr ovide satisfac- tory fuel economy and performance when using high-quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer r ecommends the use of 89 octane for op[...]
-
Page 381
The manufacturer supports the use of r eformulated gaso- lines. Properly blended r eformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in [...]
-
Page 382
It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California r eformu- lated gasolines. Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of [...]
-
Page 383
• The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting fr om the use of such fuels or additives is not the responsibility of the manufactur er . NOTE: Intentional tampering with emissio[...]
-
Page 384
W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly . Until repaired, drive with all side windows f[...]
-
Page 385
CAUTION! Damage to the fuel system or emission control sys- tem could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system and may cause the Malfunction Indicator Light (MIL) to turn on due to fuel vapors escaping from the system. CAUTION! T o avoid fuel spillage and overf[...]
-
Page 386
W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. Loose Fuel Filler Cap Message • If the gASCAP message is displayed in the instrument cluster , this signifies a leak or change in the evapora- tive system is detect[...]
-
Page 387
CAUTION! Only vehicles with the E-85 Decal and/or fuel filler door label can operate on E-85. ETHANOL FUEL (E-85) E-85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. E-85 Fuel Cap E-85 Badge ST ARTING AND OPERA TING 385 5[...]
-
Page 388
W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank. Do not use E-85 as a cleaning agent and never use it near an open flame. Fuel Requirements Y our vehicle will operate on both[...]
-
Page 389
Selection Of Engine Oil For Flexible Fuel V ehicles (FFV) E-85 and Gasoline V ehicles FFV vehicles operated on E85 requir e specially formulated engine oils. These special requir ements are included in Mopar t engine oils, and in equivalent oils meeting DaimlerChrysler Specification MS-6395. The manufacturer only recommends engine oils that ar e AP[...]
-
Page 390
Maintenance If you operate the vehicle using E-85 fuel, follow the maintenance schedule section of this manual. CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability . VEHICLE LOADING As requir ed by National Highway T raffic Safety Admin- istration Regulations, y[...]
-
Page 391
V ehicle Certification Label Y our vehicle has a V ehicle Certification Label attached to the driver’s door pillar . The label contains the following information: • Name of manufacturer • Month and year of manufacture • Gross V ehicle W eight Rating (GVWR) • Gross Axle W eight Rating (GA WR) front • Gross Axle W eight Rating (GA WR) rea[...]
-
Page 392
T ire Size The tire size on the V ehicle Certification Label repr esents the actual tire size on your vehicle. Replacement tir es must be equal to the load capacity of this tire size. Rim Size This is the rim size that is appropriate for the tir e size listed. Inflation Pressure This is the cold tire inflation pr essure for your vehicle for all loa[...]
-
Page 393
Loading T o load your vehicle properly , first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely befor e driving. If weighing the loaded vehicle shows that you have exceeded either GA WR, but the total load is within t[...]
-
Page 394
A loaded vehicle is shown in the illustration. Note that neither the GVWR or the GA WR capacities have been exceeded. LOADING T ABLE — EXAMPLE ONL Y Front Axle Rear Axle Empty W eight 2,140 lbs (971 kg) 1,470 lbs (667 kg) Load (Driver , passengers, and cargo/luggage) 360 lbs (163 kg) 980 lbs (445 kg) TOT AL 2,500 lbs (1 134 kg) 2,450 lbs (1 1 1 1[...]
-
Page 395
TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer car efully re- view this information to tow your load as efficiently and safely as possible. T o maintain warranty coverage, follow the requir ements and recommendations in this ma[...]
-
Page 396
Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and rear axles. Distribute the load over the front and r ear axles evenly . Make sure that you do not exceed either front or rear GA WR. W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either[...]
-
Page 397
W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They ar e typically used for heavier loads to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer’s axle(s). When used in accordance with the manufactur ers directions, it provides for a mor e level ride,[...]
-
Page 398
W eight Distributing Hitch System Improper Adjustment of W eight Distributing System 396 ST ARTING AND OPERA TING[...]
-
Page 399
T railer Hitch Classifications Y our vehicle may be factory-equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See an authorized dealer for package content. The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and shoul[...]
-
Page 400
T railer T owing W eights (Maximum T railer W eight Ratings) The T railer T owing W eights Chart provides the maximum trailer weight ratings towable for a given drivetrain. TRAILER TOWING WEIGHTS (MAXIMUM TRAILER WEIGHT RA TINGS) Engine/ T ransaxle GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.3L, 3.[...]
-
Page 401
T railer and T railer T ongue W eight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sever ely sway side-to-side, which will cause loss of cont[...]
-
Page 402
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the T ire and Loading Information placard in the T ire Safety Information Section of this manual for th[...]
-
Page 403
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou[...]
-
Page 404
4. T railer tongue weight rating for that trailer hitch. (This requir ement may limit the ability to always achieve the 10% to 15% range of trailer tongue weight as a percentage of total trailer weight.) T owing Requirements — T ires • Do not attempt to tow a trailer while using a compact spare tir e. • Proper tir e inflation pressures ar e e[...]
-
Page 405
• T railer brakes are r ecommended for trailers over 1,000 lbs (454 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brak[...]
-
Page 406
T owing Requirements — T railer Lights and W iring Whenever you pull a trailer , regardless of the trailer size, stop lights and turn signals on the trailer are r equired for motoring safety . The T railer T ow Package may include a four-pin or a seven-pin wiring harness. Use a factory approved trailer harness and connector . NOTE: Do not cut or [...]
-
Page 407
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. T owing T ips — Automatic T ransmission The DRIVE gear can be selected when towing. However , if frequent shifting occurs while in DRIVE, move the gear selector lever into third gear (with four -speed transmis- sion) [...]
-
Page 408
NOTE: • Check the automatic transmission fluid level before towing. • The six-speed automatic transmission is sealed and requir es an authorized dealer service center to check the transmission fluid. T owing T ips — Electronic Speed Control (If Equipped) • Don’t use in hilly terrain or with heavy loads. • When using the speed control, i[...]
-
Page 409
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) CAUTION! T owing this vehicle behind another vehicle (flat- towing with all four wheels on the ground) IS NOT RECOMMENDED. NOTE: If the vehicle requir es towing make sure all four wheels are of f the ground. ST ARTING AND OPERA TING 407 5[...]
-
Page 410
[...]
-
Page 411
WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 4 1 0 m If Y our Engine Overheats ................. 4 1 0 m Jacking And T ire Changing ................ 4 1 2 ▫ Jack Location ........................ 4 1 3 m Jump-Starting Procedur e .................. 4 2 5 m Freeing A Stuck V ehicle .................. 4 2 7 m T o[...]
-
Page 412
HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the radio. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer- gency . Pus[...]
-
Page 413
the fan control to High. This allows the heater cor e to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until th[...]
-
Page 414
JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack i[...]
-
Page 415
Jack Location The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the r ear cargo area. T urn the two cover latches to release the cover . Remove the pouch containing the scissors jack, jack handle, and tools. Rear Compartment Features 1 - T ie Down 5 - Liftgate Close Switch 2 - Switch Bank 6 - Bag Holder[...]
-
Page 416
Spare T ire Removal For vehicles equipped with Stow ’n Go seating, the spare tire is stowed inside a pr otective cover located under the center of the vehicle by means of a cable winch mecha- nism. The “spare tir e drive” nut is located on the floor , under a plastic cap at the front of the floor console. NOTE: The base console, if equipped, [...]
-
Page 417
Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in P ARK. T urn OFF the ignition. • T urn on the Hazard W arning Flasher . • Block both the front and r ear of the wheel diagonally oppo- site the jacking position. For example, if changing the right [...]
-
Page 418
W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic [...]
-
Page 419
1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. T o remove the compact spar e tire/cover assembly , assemble the winch handle extensions to form a “T’ and fit the winch “T” handle over the drive nut. Rotate the nut to the left until the winch mechanism stops tu[...]
-
Page 420
NOTE: If either front tir e is flat, it may be necessary to jack up the vehicle to remove the compact spar e tire/ cover assembly from under the vehicle. Refer to jack engagement locations in the following steps for proper jack placement. 4. When the compact spare tir e/cover assembly is clear of the vehicle, stand the tire/cover assembly upright a[...]
-
Page 421
5. There ar e two jack engagement locations on each side of the vehicle body . These locations are on the sill flange of the vehicle body . NOTE: Rear jack location is between a pair of down- standing tabs on the sill flange of the vehicle body . Front jack location is on the sill flange of the vehicle body and aligns with the front door edge. WHA [...]
-
Page 422
Jack Location 420 WHA T TO DO IN EMERGENCIES[...]
-
Page 423
CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 5. 6. Place the wrench on the jack scr ew and turn to the right until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged. 7. Raise the vehicle by turning the jack [...]
-
Page 424
10. Lower the vehicle by turning the jack screw to the left. 1 1. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 95 ft lbs (130 N·m). If in doubt about the correct tightness, have them checked with a torque [...]
-
Page 425
of operation, and after each time a tire is changed, to allow the wheel nuts to become properly set. All nuts should first be firmly seated against the wheel. The nuts should then be tightened to recommended tor que. T ighten the nuts to final torque in incr ements. Progress around the bolt cir cle, tightening the nut opposite to the nut just previ[...]
-
Page 426
2. Assemble the winch handle extensions to form the Spare T ire Hook and pull the wheel spacer from under the vehicle. 3. T urn the compact spare tir e so that the valve stem is down and place the tire into the spar e tire cover assem- bly . Slide the wheel spacer through the center of the wheel and spare tir e cover assembly so that the two retain[...]
-
Page 427
CAUTION! For vehicles equipped with Stow ’n Go seating, the W inch Mechanism is designed specifically to stow a COMP ACT Spare T ire ONL Y . Do not attempt to use the W inch to stow the Full Size ’Flat’ T ire, or any other Full Size T ire. V ehicle damage may result. JUMP-ST ARTING PROCEDURE W ARNING! • DO NOT attempt to push or tow the veh[...]
-
Page 428
When jump-starting, proceed as follows: 1. W ear eye protection and r emove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. 2. When a boost is pr ovided by a battery in another vehicle, park that vehicle within booster cable reach and without letting the vehicles touch. Set the parking brake, pl[...]
-
Page 429
6. Start the engine in the vehicle which has the booster battery , let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery . 7. When removing the jumper cables, r everse the above sequence exactly . Be careful of the moving belts and fan. W ARNING! Any procedure other than the jump-starting process listed[...]
-
Page 430
CAUTION! Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 35 mph (55 km/h). TOWING A DISABLED VEHICLE T owing With The Ignition Key Y our vehicle may be towed under the following condi- tions: The gear selector lever must be in NEUTRAL, the[...]
-
Page 431
CAUTION! • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and trans- mission may result. • If the vehicle being towed requires steering, the ignition switch must be in the OFF position, not in the LOCK or ACC positions. If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), t[...]
-
Page 432
[...]
-
Page 433
MAINT AINING YOUR VEHICLE CONTENTS m 3.3L Engine Compartment ................ 4 3 4 m 3.8L Engine Compartment ................ 4 3 5 m 4.0L Engine Compartment ................ 4 3 6 m Onboard Diagnostic System — OBD II ........ 4 3 7 ▫ Loose Fuel Filler Cap Message — gASCAP . . . 438 m Emissions Inspection And Maintenance Programs ...........[...]
-
Page 434
▫ Power Steering — Fluid Check ............ 4 5 2 ▫ Front Suspension — Ball Joints ............ 4 5 3 ▫ Steering Shaft Seal .................... 4 5 3 ▫ Drive Shaft Universal Joints .............. 4 5 4 ▫ Body Lubrication ..................... 4 5 4 ▫ W indshield W iper Blades ................ 4 5 4 ▫ Cooling System ..............[...]
-
Page 435
▫ Center High-Mounted Stop Light (CHMSL) . . . 485 ▫ License Light ........................ 4 8 5 m Fluids And Capacities ................... 4 8 6 m Fluids, Lubricants And Genuine Parts ........ 4 8 7 ▫ Engine ............................. 4 8 7 ▫ Chassis ............................ 4 8 8 MAINT AINING YOUR VEHICLE 433 7[...]
-
Page 436
3.3L ENGINE COMP ARTMENT 434 MAINT AINING YOUR VEHICLE[...]
-
Page 437
3.8L ENGINE COMP ARTMENT MAINT AINING YOUR VEHICLE 435 7[...]
-
Page 438
4.0L ENGINE COMP ARTMENT 436 MAINT AINING YOUR VEHICLE[...]
-
Page 439
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]
-
Page 440
Loose Fuel Filler Cap Message — gASCAP Should the “Loose Fuel Filler Cap” or “gASCAP” mes- sage appear , there may be a problem in the evaporative system. Before taking the vehicle into an authorized dealer , check first to see if the fuel filler cap is possibly loose, improperly installed, or damaged. A loose fuel filler cap message will[...]
-
Page 441
This vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. T o check if this vehicle’s OBD II system is ready , you must do the following: 1. Insert the ignition key into the ignition switch. 2. T urn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start th[...]
-
Page 442
serviced before going to the I/M station. The I/M station can fail the vehicle because the MIL is on with the engine running. REPLACEMENT P ARTS Use of genuine Mopar t parts for normal/scheduled maintenance and repairs is highly r ecommended to en- sure the designed performance. Damage or failur es caused by the use of non-Mopar t parts for mainten[...]
-
Page 443
MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there ar e fixed maintenance intervals, there ar e other items that should operate satisfactorily without periodic maintenance. However , if a malfunction of these item[...]
-
Page 444
Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings. Maintain the oil level between the MIN and MAX markings on the dipstick. Adding one quart of oil when the reading is at the MIN mark will result in a MAX r eading on these engines. CAUTION! Overfilling or underfilling will cause oil aeration [...]
-
Page 445
recommends engine oils that ar e API certified and meet the requir ements of DaimlerChrysler Material Standard MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only r ecommends API Certified engine oils. Engine O[...]
-
Page 446
Synthetic Engine Oils Y ou may use synthetic engine oils provided the r ecom- mended oil quality requir ements are met, and the recom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oil The manufacture str ongly recommends against the addi- tion of any additives (other than leak detection dyes) to th[...]
-
Page 447
DRIVE BEL T At the mileage indicated in the maintenance schedule, replace the drive belt with a new drive belt. NOTE: The drive belt must be routed corr ectly to ensure proper drive function. SP ARK PLUGS Spark plugs must fire pr operly to assure engine perfor- mance and emission control. New plugs should be in- stalled at the specified mileage. Th[...]
-
Page 448
CA T AL YTIC CONVERTER The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assur e pr[...]
-
Page 449
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine opera[...]
-
Page 450
Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts. Open seams or loose conne[...]
-
Page 451
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. Ke[...]
-
Page 452
AIR CONDITIONER MAINTENANCE For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a system performance check. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerant[...]
-
Page 453
Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluor o- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving pr oduct. How- ever , the manufacturer recommends that air conditioning service be performed by an authorized dealer or other an authorized service facility using recov[...]
-
Page 454
4. Disengage the two retaining tabs that secur e the filter cover to the HV AC housing and remove the cover . 5. Remove the A/C Air Filter by pulling it straight out of the housing. 6. Install the A/C Air Filter with the arrow on the filter pointing toward the floor . When installing the filter cover , make sure the retaining tabs fully engage the [...]
-
Page 455
apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized DaimlerChrysler Dealership. 9 W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacture[...]
-
Page 456
DRIVE SHAFT UNIVERSAL JOINTS Y our vehicle has constant velocity universal joints. Peri- odic lubrication of these joints is not requir ed. However , the joint boots should be inspected for external leakage or damage when other maintenance is performed. If leakage or damage is evident, the universal joint boot and grease should be replaced immediat[...]
-
Page 457
A void using the wiper blades to remove fr ost or ice from the windshield. Keep the blade rubber out of contact with petroleum pr oducts such as engine oil, gasoline, etc. W indshield and Rear Window W ashers The fluid reservoir for the windshield washers and the rear window washer is shar ed. It is located in the engine compartment and should be c[...]
-
Page 458
COOLING SYSTEM W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you see[...]
-
Page 459
drain from the coolant r ecovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush and Refill The system should be drained, flushed, and refilled at the intervals shown in the “Maintenance Schedule” in Sec- tion 8 of this manual. If the solution is dirty or contains a considerable [...]
-
Page 460
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 102,000 mi (170 000 km) before r eplacement. T o prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Pl[...]
-
Page 461
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scald- ing or injury , do not remove the pressure cap w[...]
-
Page 462
When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment. This is normally a result of moistur e from rain, [...]
-
Page 463
• Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. HOSES AND V ACUUM/V APOR HARNESSES Inspect surfaces of hoses and nylon tubing for evidence of heat [...]
-
Page 464
BRAKES In order to assur e brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the Mainte- nance Schedules. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnorma[...]
-
Page 465
NOTE: Inspection of brake hoses should be performed whenever the brake system is serviced and every engine oil change. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If ther e is any evidence of cracking, scuffing, or worn spots, the hose should be replaced immediately! Eventual deterioration of the hose can take place[...]
-
Page 466
W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that has a lower initial boiling point than the recommended MOP AR t DOT 3 product or a brake fluid that is unidentified as to FMVSS specification may result in sudden brake failure d[...]
-
Page 467
All six speed transaxles are equipped with a capped dipstick tube, it is sealed and should not be tampered with. Y our authorized dealer has the necessary tools to ensure that the fluid level is set pr operly . Selection of Lubricant It is important that the proper lubricant is used in the transaxle to assure optimum transaxle performance. Use only[...]
-
Page 468
Fluid Level Check — 3.3L Engine with Four -Speed Automatic T ransaxle — If Equipped The dipstick is located just behind the radiator , lower right side. T o properly check the automatic transaxle fluid level, the following procedur e must be used: 1. The vehicle must be on level ground. 2. The engine should be running at curb idle speed for a m[...]
-
Page 469
If the fluid level indicates low , add sufficient fluid to bring to the proper level. CAUTION! Do not overfill. Dirt and water in the transaxle can cause serious damage. T o prevent dirt and water from entering the transaxle after checking or replenishing fluid, make certain that the dipstick cap is reseated properly . Fluid and Filter Changes Refe[...]
-
Page 470
trees and r oad surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extr eme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under - body protectio[...]
-
Page 471
• A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose o[...]
-
Page 472
Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels should be cleaned r egularly with a mild soap and water to prevent corr osion. T o remove heavy soil and/or excessive brake dust, use Mopar t Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner . Do not use scouring pa[...]
-
Page 473
soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia-based cleaners to clean your leather upholstery . Application of a leather conditioner is not requir ed to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes. Many are pote[...]
-
Page 474
2. T o maintain the high gloss shine, apply a scratch and swirl remover onto a damp cloth and apply to door applique. Rub the applique with a firm pressur e then buff lightly with a clean cotton cloth until a high gloss shine is achieved. Cleaning Headlights Y our vehicle has plastic headlights that are lightweight and less susceptible to stone bre[...]
-
Page 475
1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the seatbelts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage c[...]
-
Page 476
Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer . FUSES/TOT ALL Y INTEGRA TED POWER MODULE (TIPM) The T otally Integrated Power Module (TIPM) is located in the engine compartment near the battery . This center contains cartridge fuses[...]
-
Page 477
FUSES/TIPM Cavity Cartridge Fuse Mini Fuse Description J1 40 Amp Green — Power Folding Seat J2 30 Amp Pink — Power Liftgate Module J3 40 Amp Green — Rear Door Module (RR Door Node) J4 25 Amp Natural — Driver Door Node J5 25 Amp Natural — Passenger Door Node J6 40 Amp Green — Anti-Lock Brake System (ABS) Pump/ESP J7 30 Amp Pink — Anti-[...]
-
Page 478
FUSES/TIPM Cavity Cartridge Fuse Mini Fuse Description J21 20 Amp Y ellow — Front/Rear W asher J22 25 Amp Natural — Sunroof Module M1 — 15 Amp Blue Center High Mounted Stop Light (CHMSL)/ Brake Switch M2 — 20 Amp Y ellow T railer Lighting M3 — 20 Amp Y ellow — M4 — 10 Amp Red T railer T ow M5 — 25 Amp Natural Inverter M6 — 20 Amp [...]
-
Page 479
FUSES/TIPM Cavity Cartridge Fuse Mini Fuse Description M12 — 30 Amp Green Amplifier (AMP) M13 — 20 Amp Y ellow Ignition Off Draw— Cabin Compartment Node (IOD-CCN), W ire- less Control Module (WCM), SIREN, Clock Module (CLK MOD), Multi-Function Control Switch (MUL TIFCTN SW) M14 — 20 Amp Y ellow T railer T ow (Export Only) FUSES/TIPM Cavity [...]
-
Page 480
FUSES/TIPM Cavity Cartridge Fuse Mini Fuse Description M17 — 15 Amp Blue Left T ail/License/Park Lamp (L T -T AIL/LIC/ PRK LMP) M18 — 15 Amp Blue Right T ail/Park/Run Lamp (R T -T AIL/PRK/ RUN LMP) M19 — 25 Amp Natural Auto Shut Down (ASD #1 and #2) M20 — 15 Amp Blue Cabin Compartment Node Interior Light (CCN INT LIGHT), Switch Bank (SW BAN[...]
-
Page 481
FUSES/TIPM Cavity Cartridge Fuse Mini Fuse Description M29 — 10 Amp Red Occupant Classification Module (OCM) M30 — 15 Amp Blue Rear W iper Module (RR WIPER MOD), Power Folding Mirror (PWR FOLD MIR) M31 — 20 Amp Y ellow Back-Up Lamps (B/U LAMPS) M32 — 10 Amp Red Occupant Restraint Con- troller (ORC), TT EU- ROPE M33 — 10 Amp Red Next Gener[...]
-
Page 482
FUSES/TIPM Cavity Cartridge Fuse Mini Fuse Description M38 — 25 Amp Natural Lock/Unlock Motors (LOCK/UNLOCK MTRS) CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly re[...]
-
Page 483
The Heated Mirrors, Lower Instr ument Panel Power Outlet and Removable Floor Console, when in the front position are fused with self-r esetting fuses that are only serviceable by an authorized dealer . The power seats are fused by a 30 Amp circuit br eaker located under the driver’s seat. The Power W indows are fused by a 25 Amp circuit br eaker [...]
-
Page 484
NOTE: For lighted switches, see your dealer for replace- ment. All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS — Exterior Bulb Number Backup, T ail, Stop Light ................... 3157 Center High-Mounted Stop Light . . . LED (See Not[...]
-
Page 485
5. Connect the wiring connector to bulb and slide red lock tab forward. Front Park/T urn Signal and Side Marker Lights 1. Raise the hood to access the rear of the headlight housing. 2. T wist the turn signal socket and remove fr om the headlight housing, then pull the bulb out. 3. Push the new bulb into the socket and reinstall the socket by twisti[...]
-
Page 486
Rear T ail, Stop, T urn Signal, Side Marker and Backup Lights 1. Raise the liftgate. 2. Remove the tail light assembly by removing the two screws fr om the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to disengage the two ball studs. NOTE: • If a screwdriver is used, make sur e a soft material is pl[...]
-
Page 487
3. T wist the socket and remove form the light assembly . 4. Pull the bulb to remove it fr om the socket. 5. Replace the bulb, reinstall the socket, and r eattach the light assembly . Center High-Mounted Stop Light (CHMSL) The CHMSL uses LED lights that are not serviceable separately . The CHMSL must be r eplaced as an assembly , see your authorize[...]
-
Page 488
FLUIDS AND CAP ACITIES FLUIDS AND CAP ACITIES U.S. Metric Fuel (approximate) All Engines 20 Gals 76 L Engine Oil with Filter 3.3L and 3.8L (SAE 5W -20 API Certified) 5.0 Qts 4.7 L 4.0L (SAE 10W -30 API Certified) 5.5 Qts 5.2 L Cooling System 3 3.3L, 3.8L and 4.0L (Use Mopar t Antifreeze/Coolant Five Y ear/ 100,000 Mile Formula or equivalent.) 13.4 [...]
-
Page 489
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine FLUIDS, LUBRICANTS AND GENUINE P AR TS — ENGINE Component Fluids, Lubricants and Genuine Parts Coolant Mopar t Antifreeze/Coolant Five Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent Oil – 3.3L, 3.8L Use API Certified SAE 5W -20 engine oil. Refer to your oil fille[...]
-
Page 490
Chassis FLUIDS, LUBRICANTS AND GENUINE P AR TS — CHASSIS Component Fluids, Lubricants and Genuine Parts Automatic T ransmission Mopar t A TF+4 Automatic T ransmission Fluid Brake Master Cylinder Mopar t DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake flu[...]
-
Page 491
MAINTENANCE SCHEDULES CONTENTS m Emissions Control System Maintenance ....... 4 9 0 m Maintenance Schedule ................... 4 9 0 ▫ Required Maintenance Intervals ........... 4 9 3 8 M A I N T E N A N C E S C H E D U L E S[...]
-
Page 492
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Con- trol System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliabili[...]
-
Page 493
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Un[...]
-
Page 494
• Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items ma[...]
-
Page 495
Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate T ires. 6,000 10 000 6 If using your vehicle for any of the following: Dusty or off-r oad conditions. In[...]
-
Page 496
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the automatic transmission fluid & filter if using your vehicle for any of the following: police, taxi, fleet or frequent trailer towing. 60,000 100 000 60 Inspect and replace PCV valve if nec[...]
-
Page 497
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. MAINTENANCE SCHEDULES 495 8 M A I N T E N A N C E S C H E D U L E S[...]
-
Page 498
[...]
-
Page 499
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 9 9 ▫ Prepar e For The Appointment ............ 4 9 9 ▫ Prepar e A List ........................ 4 9 9 ▫ Be Reasonable W ith Requests ............. 4 9 9 m If Y ou Need Assistance ................... 4 9 9 ▫ Chry[...]
-
Page 500
m Department Of T ransportation Uniform T ire Quality Grades ........................ 5 0 5 ▫ T readwear .......................... 5 0 5 ▫ T raction Grades ...................... 5 0 5 ▫ T emperature Grades ................... 5 0 6 498 IF YOU NEED CONSUMER ASSIST ANCE[...]
-
Page 501
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]
-
Page 502
high quality service. The manufacturer’s authorized deal- ers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this p[...]
-
Page 503
Chrysler Canada Inc. Customer Center P .O. Box 1621 W indsor , Ontario N9A 4H6 Phone: (800) 465–2001 In Mexico contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P . 05109 Mexico, D. F . In Mexico City: 5081-4568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers[...]
-
Page 504
service contract that is not a manufacturer’s Service Contract, and you requir e service after the manufactur- er’s New V ehicle Limited W arranty expires, please refer to the contract documents, and contact the person listed in those documents. W e appreciate that you have made a major investment when you purchased the vehicle. An authorized d[...]
-
Page 505
MOP AR T P ARTS Mopar t fluids, lubricants, parts, and accessories are available from an authorized dealer . They will help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And W ashington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immedia[...]
-
Page 506
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Expr ess, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is r equired when ordering manuals (no P .O. Boxes). • S[...]
-
Page 507
Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade ratin[...]
-
Page 508
W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability[...]
-
Page 509
INDEX 10[...]
-
Page 510
Adding Engine Coolant (Antifreeze) .......... 4 5 8 Adding Fuel ........................... 3 8 2 Adding W asher Fluid ..................... 4 5 5 Additives, Fuel ......................... 3 8 0 Adjustable Pedals ....................... 1 7 7 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 445 Air Conditioner Maintenance ............... 4 5 [...]
-
Page 511
Automatic Dimming Mirror ................ 1 0 0 Automatic Door Locks ................... 34,35 Automatic Headlights .................... 1 6 3 Automatic T emperature Contr ol (A TC) ......... 3 0 9 Automatic T ransaxle ...................... 3 2 8 Adding Fluid ......................... 4 6 5 Fluid Level Check ...................... 4 6 5 Interlock [...]
-
Page 512
Brakes ............................. 337,462 Brake/T ransmission Interlock ............... 3 2 8 Break-In Recommendations, New V ehicle ........ 9 3 Bulb Replacement ....................... 4 8 2 Bulbs, Light ............................ 4 8 1 Calibration, Compass .................. 240,246 Capacities, Fluid ........................ 4 8 6 Caps, Fil[...]
-
Page 513
Coin Holder ........................... 2 0 1 Cold W eather Operation ................... 3 2 5 Compact Disc (CD) Maintenance ............. 3 0 0 Compact Spare T ire ...................... 3 6 1 Compass ........................ 238,240,246 Compass Calibration .................. 240,246 Compass V ariance .................... 240,247 Computer , T rip[...]
-
Page 514
Digital V ideo Disc (DVD) Player .......... 280,283 Dimmer Control ........................ 1 6 2 Dimmer Switch, Headlight ................. 1 7 0 Dipsticks Automatic T ransaxle .................... 4 6 5 Automatic T ransmission ................. 4 6 6 Oil (Engine) .......................... 4 4 1 Disabled V ehicle T owing ................... 4 2 8[...]
-
Page 515
Emission Control System Maintenance ...... 438,490 Engine ........................ 93,434,435,436 Air Cleaner .......................... 4 4 5 Block Heater ......................... 3 2 7 Break-In Recommendations ................ 9 3 Checking Oil Level ..................... 4 4 1 Compartment ...................... 435,436 Coolant (Antifreeze) .....[...]
-
Page 516
Flashers Hazard W arning ....................... 4 1 0 T urn Signal ..................... 227,483,484 Flash-T o-Pass ........................... 1 7 0 Flat T ire Stowage ........................ 4 2 2 Flexible Fuel V ehicles Cruising Range ........................ 3 8 7 Engine Oil ........................... 3 8 7 Fuel Requirements ................[...]
-
Page 517
Requirements ...................... 377,486 System Hoses ......................... 4 6 1 T ank Capacity ........................ 4 8 6 Fuel, Flexible ............. See Flexible Fuel V ehicles Fuel System Caution ..................... 3 8 0 Fueling ............................... 3 8 2 Fuses ................................ 4 7 4 Garage Door Opener [...]
-
Page 518
Passing ............................. 1 7 0 Replacing ............................ 4 8 2 T ime Delay .......................... 1 6 4 Heated Seats ........................... 1 3 5 Heater ............................... 3 0 1 Heater , Engine Block ..................... 3 2 7 High Beam/Low Beam Select (Dimmer) Switch . . 170 Hitches T railer T owing[...]
-
Page 519
Key , Sentry (Immobilizer) ................... 1 5 Key-In Reminder ......................... 1 5 Keyless Entry System ...................... 2 1 Keys ................................. 1 2 Knee Bolster ............................ 6 7 Lap/Shoulder Belts ....................... 5 7 LA TCH (Lower Anchors and T ether for CHildren) ... 8 6 Latches Hood [...]
-
Page 520
License ............................. 4 8 5 Lights On Reminder .................... 1 6 5 Low Fuel ............................ 2 3 4 Malfunction Indicator (Check Engine) ........ 2 3 2 Oil Pressur e .......................... 2 3 3 Park ............................. 162,483 Passing ............................. 1 7 0 Reading ......................[...]
-
Page 521
Memory Seat ........................ 104,155 Mini-T rip Computer ................... 238,244 Mirrors ............................... 1 0 0 Automatic Dimming .................... 1 0 0 Electric Remote ..................... 102,103 Exterior Folding ....................... 1 0 2 Memory ............................. 1 5 5 Outside ......................[...]
-
Page 522
Outside Rearview Mirrors ............... 100,102 Overdrive ............................. 3 3 2 Overhead Console ....................... 1 8 2 Overhead T ravel Information Center .......... 1 8 2 Overheating, Engine ................... 226,410 Owner’s Manual (Operator Manual) .......... 5 0 4 Panic Alarm ............................ 2 4 Park Sense[...]
-
Page 523
Pretensioners Seat Belts ............................. 6 4 Programmable Electr onic Features ............ 2 4 8 Radial Ply T ires ......................... 3 6 1 Radiator Cap (Coolant Pressur e Cap) ....... 457,458 Radio Broadcast Signals ................... 2 5 1 Radio, Navigation ....................... 2 8 3 Radio Operation ................... 2[...]
-
Page 524
Safety Checks Outside V ehicle ............... 9 4 Safety Defects, Reporting .................. 5 0 3 Safety , Exhaust Gas ....................... 5 1 Safety Information, T ire ................... 3 4 8 Safety T ips ............................. 9 3 Satellite Radio ............ 280,281,283,284,287,297 Satellite Radio Antenna ................... 2 8[...]
-
Page 525
Service Engine Soon Light (Malfunction Indicator) . . 232 Service Manuals ........................ 5 0 4 Setting the Clock ................ 254,269,281,285 Settings, Personal ........................ 2 4 8 Shoulder Belts ........................... 5 7 Signals, T urn ................... 166,227,483,484 Sliding Door ............................ 4 1 [...]
-
Page 526
Synthetic Engine Oil ...................... 4 4 4 System, Navigation ...................... 2 8 3 System, Remote Starting .................... 2 8 T achometer ............................ 2 2 9 T emperature Contr ol, Automatic (A TC) ........ 3 0 9 T emperature Gauge, Engine Coolant ........ 226,41 1 T ether Anchor , Child Restraint ...............[...]
-
Page 527
T read W ear Indicators ................... 3 6 4 Wheel Nut T orque ..................... 4 2 2 T ongue W eight/T railer W eight .............. 3 9 9 T owing ............................... 3 9 3 24-Hour T owing Assistance ............... 1 1 7 Disabled V ehicle ....................... 4 2 8 Guide .............................. 3 9 8 Recreational .[...]
-
Page 528
UConnect™ (Hands-Free Phone) .......... 104,283 Uniform T ire Quality Grades ................ 5 0 5 Universal Consumer Interface (UCI) Connector . . . 292 Universal Joints ......................... 4 5 4 Universal Serial Bus (USB) Port ........... 280,283 Universal T ransmitter ..................... 1 8 5 Unleaded Gasoline .......................[...]
-
Page 529
W indshield W iper Blades .................. 4 5 4 W indshield W ipers ....................... 1 6 8 W iper Blade Replacement .................. 4 5 4 W ipers, Intermittent ...................... 1 6 9 YES Essentials t Fabric Cleaning Procedur e ...... 4 7 1 Zone Control (T emperature Control) .......... 3 0 5 INDEX 527 10[...]
-
Page 530
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power[...]
-
Page 531
Car a v an OWNER’ S MANUAL 2008 2008 Car a v an 81-226-0819 Fourth Edition P r inted in U .S.A.[...]