Enterasys Networks 4H4202-72 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 90 pages
- 2.41 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Network Hardware
Enterasys Networks SNS-TAG-HPA
34 pages 0.94 mb -
Network Hardware
Enterasys Networks SNS-TAG-LPA
34 pages 0.94 mb -
Network Hardware
Enterasys Networks 4H4282-49
90 pages 2.41 mb -
Network Hardware
Enterasys Networks 4H4284-49
90 pages 2.41 mb -
Network Hardware
Enterasys Networks 4H4203-72
90 pages 2.41 mb -
Network Hardware
Enterasys Networks 4H4202-72
90 pages 2.41 mb -
Network Hardware
Enterasys Networks 4H4283-49
90 pages 2.41 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Enterasys Networks 4H4202-72. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Enterasys Networks 4H4202-72 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Enterasys Networks 4H4202-72 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Enterasys Networks 4H4202-72 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Enterasys Networks 4H4202-72
- nom du fabricant et année de fabrication Enterasys Networks 4H4202-72
- instructions d'utilisation, de réglage et d’entretien de l'équipement Enterasys Networks 4H4202-72
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Enterasys Networks 4H4202-72 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Enterasys Networks 4H4202-72 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Enterasys Networks en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Enterasys Networks 4H4202-72, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Enterasys Networks 4H4202-72, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Enterasys Networks 4H4202-72. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
7.5x9-inch cover with bleed on 4 sides Enterasys Matrix ™ DFE-Gold Series Hardware Installation Guide Module 4H4282-49 Module 4H4283-49 Module 4H4203-72 Module 4H4202-72 Module 4H4284-49 P/N 9033906-04[...]
-
Page 2
[...]
-
Page 3
i Notice Enterasys Networks reserv es the right to make changes in specif ications and other info rmation contained in this document and its web site without prior notice. The reader should in all cases consult Enterasy s Networks[...]
-
Page 4
ii Regulatory Compliance Information Federal Communications Commission (FCC) Notice This device com plies with Par t 15 of th e FCC rules. Operat ion is subject to the foll owing tw o conditions: (1) this device may not cause harmful interference, ?[...]
-
Page 5
iii Electromagnetic Compatibility (EMC) This product complies with the follo wing: 47 CFR Par t s 2 and 15, CSA C108.8, 89/336/EEC, EN 55022, EN 61000 ‐ 3 ‐ 2, EN 61000 ‐ 3 ‐ 3, EN 55024, AS/NZS CISPR 22, VCCI V ‐ 3. Compatibilidad [...]
-
Page 6
iv ѻ ѻ ક䇈ᯢк䰘ӊ Supplement to Product Instructions ᳝↦᳝ᆇ⠽䋼ܗ㋴ (Hazardous Substance) 䚼ӊৡ⿄ (Parts) 䪙 3E ∲ +J 䬝 &G ݁Ӌ䫀 &U ⒈㘨㣃 3%% ⒈Ѡ㣃䝮 3%'( 䞥ሲ䚼ӊ (Metal Parts) hƻ ƻ h ƻ ƻ ⬉䏃ഫ ( Circuit [...]
-
Page 7
v VCCI Notice This is a class A product based on the standard of the Vo l u n t a r y Control Co uncil for Interfe rence by Information Te c h n o l o g y Equipment (VCCI). If this equipmen t is used in a domestic environment, [...]
-
Page 8
vi Declaration of Conformity Application of Co uncil Directiv e(s): 89/336/EEC 73/23/EEC Manufacturer ’ s Name: Enterasys Networks, Inc. Manufacturer ’ s Address: 50 Minuteman Road Andover , MA 01810 USA European Representativ e Address: Enterasys Networks, Ltd. Nexus House, Newbury Bu[...]
-
Page 9
vii Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZIN G THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“ Agreement”) betwee n the end user (“Y o u”) and Enteras ys Networks, Inc. on be half of itself [...]
-
Page 10
viii 3. APPLICABLE LAW. This Agreem ent shall be interpreted and governed under the laws and in the state and federal courts of th e Commonwealth of Massachu setts with out regard to its conflicts of laws provis ions. You [...]
-
Page 11
ix 8. AUDIT RIGHTS. You here by acknowled ge that the intellectual property rights associated with the Program are of critical value to Enterasys and, accordingly, You hereby agree to maintain complete books, records and accounts [...]
-
Page 12
x[...]
-
Page 13
xi Contents About This Guide Who Should Use This G uide .............. ....................... ....................... ......................... ................ .......... xv How to Use This Guide ................ ....................... ...................... ....................... ..................... ........ ..... xvi Related Documents .....[...]
-
Page 14
xii Connecting to COM Port for Local Management ................... ....................... ...................... ............. 3-20 What Is Needed ..... ...................... .................... ...................... ....................... .................... ...... ... 3-20 Connecting to an IBM PC or Co mpatible Device .......... ..........[...]
-
Page 15
xiii Figures 1-1 4H4282-49, 4H4283-49, and 4H4203-72 DFE-Gold Modules .................... ...................... ............ 1-4 1-2 4H4202 -72 and 4H4284-49 DFE-Gold Modules . ....................... ...................... ....................... ..... 1-5 3-1 Examples, Slot Numbers/Module Placement in Ma trix E7 Chassis .................... ...[...]
-
Page 16
xiv Tables 3-1 Contents of DFE-Gold Module Carton .............. ...... .................... ...................... ....................... ..... 3-2 4-1 LANVIEW LEDs ......... ....................... ...................... ....................... ...................... ............. ............ 4-5 4-1 Troubleshooting Checklist ... ... ..........[...]
-
Page 17
Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide xv About This Guide This guide provides an ov erview , installation and troubleshooting instructions, and specifications for the Enterasys Matr ix™ DFE ‐ Gold 4H4282 ‐ 49, 4H4283 ‐ 49, 4H4203 ‐ 72, ?[...]
-
Page 18
How to Use This Guide xvi About This Guide How to Use This Guide This preface provides an overview of this guide and the DFE ‐ Gold Series manual set, and a brief summary of each chapter; de fines the conv entions used in this document; [...]
-
Page 19
Conventions Used in This Guide Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide xvii Conventions Used in This Guide The following conventions are used in this guide: Lowercase x : Indicates the general use of an alphanumeric character (for example, 6x1xx[...]
-
Page 20
Getting Help xviii About This Guide Getting Help For additional support related to the modules or this document, contact Enterasys Networks using one of the following metho ds: Before contacting Enterasys Networks for technical support, have the foll[...]
-
Page 21
Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-1 1 Introduction This chapter provides an overview of the DFE ‐ Gold module capabilities, and introduces the 4H4282 ‐ 49, 4H428 3 ‐ 49, 4H4203 ‐ 72, 4H 4202 ‐ 72, and 4H4284 ‐ 49 DFE ‐ Gold[...]
-
Page 22
The DFE-Gold Modules 1-2 Introduction • Reduced support and maintenance costs, and decreased configuration time • Support for a var i et y of converged applications including Vo I P with Po we r ‐ over ‐ Ethernet The DFE-Gold Modules This section provide[...]
-
Page 23
The DFE-Gold Modules Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-3 4H4203-72 The 4H4203 ‐ 72 has 72, 10BASE ‐ T/100BASE ‐ TX compliant ports through six front ‐ panel RJ21 connectors. Each of the fixed front panel ports can operate [...]
-
Page 24
The DFE-Gold Modules 1-4 Introduction Figure 1- 1 4H4282- 49, 4H4283-49, and 4H4203- 72 DFE-Gold Modules 1 OFFLINE/RESET button 6 GROUP status LEDs 2 RJ45 COM (Console Port) 7 GROUP select LEDs 3 CPU LED 8 4H4282-49 / 4H4283-49 - N EM option slot 4 MGMT LED 4H4203-72 - Ports (1-72), 10/100, through six RJ21s 5 GROUP SELECT button 9 4H4282-49 - Port[...]
-
Page 25
The DFE-Gold Modules Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-5 Figure 1-2 4H4202 -72 and 4H4284-49 DF E-Gold Modul es 1 OFFLINE/RESET switch 6 GROUP select LEDs 2 RJ45 COM (Console Port) 7 GROUP SELECT button 3 CPU LED 8 GROUP status LEDs 4 MGMT LED 9 4H4202-72 - Groups 1&2, 48 Ports, 10/100, through RJ45s 4H4284-[...]
-
Page 26
Connectivity 1-6 Introduction Connectivity 4H4282-49 Depending on how the 4H4282 ‐ 49 ( Figure 1 ‐ 1 ) is configured, it can support up to: • 48, 10BASE ‐ T/100BASE ‐ TX swi tched ports connected through 48 fixed, RJ45 front ‐ panel connectors, o[...]
-
Page 27
Management Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-7 Management Management of the module can be either in ‐ band or out ‐ of ‐ band. In ‐ band remote management is possible us ing Te l n e t , Enterasys Networks’ NetSight ® man agem[...]
-
Page 28
LANVIEW Diagnostic LEDs 1-8 Introduction •N e t w o r k Services are logical groups of Classification Rules that identify specific networked applic ations or services . Users may be permitted or denied access to these services based on thei[...]
-
Page 29
Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 2-1 2 Network Requirements Before inst alling the module, review the requirements and specificat ions referred to in this chapter concerning the following: • 10BASE ‐ T Netw ork (page 2 ‐ 1) • 100BASE [...]
-
Page 30
100BASE-TX Network 2-2 Network Requirements 100BASE-TX Network Fixed front panel ports of the 4H4282 ‐ 49, 4H4283 ‐ 49, 4H4203 ‐ 72, and 4H4202 ‐ 72 provide a connection that supports Category 5 UTP cabling. The device at the other end of [...]
-
Page 31
Matrix DFE-Gold Series Modules Hardware Installation Guide 3-1 3 Installation This chapter provides the instructions to install the 4H4282 ‐ 49, 4H4283 ‐ 49, 4H4203 ‐ 72, 4H4202 ‐ 72, and 4H4284 ‐ 49 DFE ‐ Gold modules. Follow the order of the sections li sted ?[...]
-
Page 32
Installation Site Requirement 3-2 Installation Inst allation Site Requirement The DFE ‐ Gold module must be installed in a Matrix E7, N1, N3, N5, or N7 chassis located in a Restricted Access Location (RAL). This location should only be acce[...]
-
Page 33
Installing Optional Netw ork Expansion Module Matrix DFE-Gold Series Modules Hardware Installation Guide 3-3 Inst alling Optional Network Exp ansion Module A Phillips screwdriver is required to ins tall an optional netw ork expansion module into the 4H4282 ‐ 49, 4H428 3 ‐ 49, or ?[...]
-
Page 34
DFE Module Placement and Installation Rules 3-4 Installation To ensure proper operation of the system, consider the following examples and rules for module placement in either chassis. Example 1 ( Figure 3-1 , A) Shows one module installed in the chassis[...]
-
Page 35
Installing Module into a Chassis Matrix DFE-Gold Series Modules Hardware Installation Guide 3-5 Example 3 ( Figure 3-1 , C) Shows the primary management module missing from slot 1. As long as the module installed in slot 2 is designated as a re dundant manag[...]
-
Page 36
Installing Module into a Chassis 3-6 Installation Prep aration 1. Remove the blank pan el cov ering the slot in which the module will be installed. All other slots must remain cov ered to ensure proper airflow for cooling. (Save the blank[...]
-
Page 37
Installing Module into a Chassis Matrix DFE-Gold Series Modules Hardware Installation Guide 3-7 2. Align the module card between the upper and lower card guides of the desired slot and slide it into the chassis, taking care that the module slides[...]
-
Page 38
Installing Module into a Chassis 3-8 Installation Figure 3-2 Inst alling Module into M atr ix E7 or N7 Chassis (Matrix E7 shown) 1 Card guides 5 Upper/lower locking tabs (in proper open position) 2 Slot number 1(right-most slot is 7) 6 Upper/lower locking tab (in clo sed position) 3 Module card 7 Backplane connectors (power and FTM2) 4 Metal back p[...]
-
Page 39
Installing Module into a Chassis Matrix DFE-Gold Series Modules Hardware Installation Guide 3-9 Inst alling Module into Matr ix N1, N3, or N5 Chassis A DFE ‐ Gold module can be installed in any av ailable chassis sl ot (1 through 3) in the Matrix N3 chassis or slots 1 [...]
-
Page 40
Connecting to the Network 3-10 Installation Connecting to the Network For connecting unshielded twisted pair (UTP ) segments from the network or other devices, refer to • Connecting UTP Cables to 4H4282 ‐ 49 or 4H4202 ‐ 72 (page 3 ‐ 11) • Connecting UT[...]
-
Page 41
Connecting to the Network Matrix DFE-Gold Series Modules Hardware Installation Guide 3-11 Connecting UTP Cables to 4H4282-49 or 4H4202-72 The fixed RJ4 5 front panel connections of the 4H4282 ‐ 49 and 4H4202 ‐ 72 are 10/100 Mbps ports. The ports have internal crossov er[...]
-
Page 42
Connecting to the Network 3-12 Installation 3. V erify that a link ex ists by check ing that the port RX (Receive ) LED is ON (flashi ng amber , blinking green, or solid green). If the RX LED is OFF and the TX (Tr a n s m i t [...]
-
Page 43
Connecting to the Network Matrix DFE-Gold Series Modules Hardware Installation Guide 3-13 Figure 3-5 Four-Wire Crossover Cable RJ45 Pinout s, Connections Between Hub Devices 1 RJ45 device port 3 RJ45-to-RJ45 crossover cable 2 Other device port 4 RX+/RX- and TX+/TX- connections. These connections must share a common color pair . Figure 3-6 Four-Wire[...]
-
Page 44
Connecting to the Network 3-14 Installation Figure 3-7 Eight-Wire Crossover Cable RJ45 Pinout s, Connections Between Hub Devices 1 RJ45 device port 3 RJ45-to-RJ45 crossover cable 2 Other device port Figure 3-8 Eight-Wire St raight-Throu gh Cable RJ45 Pinout s, Connections Between Sw itches and End-Use r Devices 1 RJ45 device port 3 RJ45-to-RJ45 str[...]
-
Page 45
Connecting to the Network Matrix DFE-Gold Series Modules Hardware Installation Guide 3-15 e. Ensure that the twisted pai r connection meets the dB loss and cable specifications outlined in the Cabling Guide. Refer to “Related Documents” on page xvi ?[...]
-
Page 46
Connecting to the Network 3-16 Installation 3. T o install an RJ21 right ‐ angle connector , refer to Fi gure 3 ‐ 10 and proceed as follows: a. If using an optional RJ21 angle adapter available from Enterasys Networks, insert the angle adapte[...]
-
Page 47
Connecting to the Network Matrix DFE-Gold Series Modules Hardware Installation Guide 3-17 Figure 3-10 Connection Using Optional RJ21 An gle Adapter 1 RJ21 angle adapter 5 Retaining clips 2 RJ21 port connector 6 GROUP SELECT button 3 Retaining screws 7 Example showing how multiple cables would be arranged along the front panel. 4 RJ21 right-angled c[...]
-
Page 48
Connecting to the Network 3-18 Installation 4. V erify that a link ex ists by check ing that the port RX (Receive ) LED is ON (flashi ng amber , blinking green, or solid green). If the RX LED is OFF and the TX (Tr a n s m i t [...]
-
Page 49
Connecting to the Network Matrix DFE-Gold Series Modules Hardware Installation Guide 3-19 2. Insert the MT ‐ RJ cable connector into the MT ‐ RJ front panel connector until it clicks into place. Figure 3-1 1 Connecting a Fiber-Optic Segment to MT -RJ Front Panel Connector Note: Leave t[...]
-
Page 50
Connecting to COM Port for Local Management 3-20 Installation 1. V erify that a link ex ists by check ing that the port RX LED is ON (flashing amber , blinking green, or solid green). If the RX LED is OFF and the TX LED is [...]
-
Page 51
Connecting to COM Port for Local Management Matrix DFE-Gold Series Modules Hardware Installation Guide 3-21 Wi th a UTP straight ‐ through cab le and RJ45 ‐ to ‐ DB25 female ad apter , yo u can connect products equipped with an RJ45 COM port to a VT se rie[...]
-
Page 52
Connecting to COM Port for Local Management 3-22 Installation Connecting to a VT Series T erminal To connect a VT Series terminal to an Enterasys Netw orks DFE ‐ Gold module COM port ( Figure 3 ‐ 13 ), use a UTP straight ‐ through cable with RJ45 connectors an[...]
-
Page 53
Connecting to COM Port for Local Management Matrix DFE-Gold Series Modules Hardware Installation Guide 3-23 When these parameters are set, the Local Management password screen will display . Refer to the Enterasys Matrix DFE ‐ Gold Series Configuration Guide for ?[...]
-
Page 54
Connecting to COM Port for Local Management 3-24 Installation 5. With a PC connected to a remote mo dem, you can configure th e switch remotely . To accomplish this, you must configure you r PC VT emulation package with the following para[...]
-
Page 55
Connecting to COM Port for Local Management Matrix DFE-Gold Series Modules Hardware Installation Guide 3-25 Adapter Wiring and Signal Assignment s COM Port Adapter Wiring and Sign al Diagram RJ45 DB9 Pin Conductor Pin Signal 1 Blue 2 Receive (RX) 4 Red 3 T ransmit (TX) 5 Green 5 Ground (GRD) 2 Orange 7 Request to Send (RTS) 6 Y ellow 8 Clear to Sen[...]
-
Page 56
Completing the Installation 3-26 Installation Completing the Inst allation Completing the DFE module installat ion depends on if the module is being installed in: •a new DFE module syst em (refer to “Completing the Installation” on page 3 ‐ 26), [...]
-
Page 57
Completing the Installation Matrix DFE-Gold Series Modules Hardware Installation Guide 3-27 First-T ime Log-In Using a Console Port Connection Start the Command Line Interface (CLI) from the module’ s local console port as follo ws: 1. Connect a terminal to the local cons[...]
-
Page 58
Completing the Installation 3-28 Installation Completing the Inst allation of a DFE-Gold Module in an Existing System In an established DFE ‐ Gold module system, •a DFE ‐ Gold module is already established as the management module, •t h e passwords hav e alrea dy been set ?[...]
-
Page 59
Completing the Installation Matrix DFE-Gold Series Modules Hardware Installation Guide 3-29 Logging in with an Administrati vely-Configured User Account If the device’ s default user account settings have been changed, proceed as follows: 1. At the login prompt, enter your ad[...]
-
Page 60
Completing the Installation 3-30 Installation[...]
-
Page 61
Matrix DFE-Gold Series Modules Hardware Installation Guide 4-1 4 T roubleshooting This chapter provides information concerning the following: • Using LANVIEW (page 4 ‐ 1) • T roubleshooting Checklist (page 4 ‐ 7) • Overview of DF E ‐ Gold Module Shutdown Procedure (page 4 ?[...]
-
Page 62
Using LANVIEW 4-2 Troubleshooting Viewing Receive/T ransmit Activi ty on 4H4282-49, 4H4283-49, and 4H4203-72 On the 4H4282 ‐ 49, 4H4283 ‐ 49, and 4H4203 ‐ 72 you can view the receive and transmit activity on the RX and TX LEDs. How ever , only one grou[...]
-
Page 63
Using LANVIEW Matrix DFE-Gold Series Modules Hardware Installation Guide 4-3 Viewing Receive/T ransmit Activity on 4H4202-72 On the 4H4202 ‐ 72, you can view the receive and transmit activity on the RX and TX LEDs. Howeve r , only one group of 24 ports [...]
-
Page 64
Using LANVIEW 4-4 Troubleshooting Viewing the Receive and T ran smit Activity on 4H4284-49 On the 4H4284 ‐ 49 DFE ‐ Gold module, you can view the receive and transmit activity on the RX and TX LEDs. How ever , only one group of 12 ports may b[...]
-
Page 65
Using LANVIEW Matrix DFE-Gold Series Modules Hardware Installation Guide 4-5 T able 4-1 LANVIEW LEDs LED Color Stat e Recomme nded Action MGMT None Off . This module is NOT the Management Module. None. Green Solid . This module is the designated Management Module. None. Amber Flashing . This is a temporary indi cation that the module is saving data[...]
-
Page 66
Using LANVIEW 4-6 Troubleshooting RX (Receive) None No link . No activity . Port enabled or di sabled. None. Green Solid . Link present, port enabled, no traffic is being received by the i nterface. None. Amber Flashing . Link present, port enabled, traffic is being received by the i nterface. Rate of flashing indicate s the data transmission rate.[...]
-
Page 67
Troubleshooting Checklist Matrix DFE-Gold Series Modules Hardware Installation Guide 4-7 T roubleshooting Checklist If the module is not work in g properly , refer to Ta b l e 4 ‐ 1 for a checklist of problems, possible causes, and recommended actions to resolve ?[...]
-
Page 68
Troubleshooting Checklist 4-8 Troubleshooting Port(s) goes into standby for no apparent reason. Loop conditio n detected. V erify th at S panning T ree is enabled. Refer to the Enterasys Matrix DFE-Gold Series Confi guration Guide for the instructions to set the type of ST A. Review the network design and dele te unnecessary loops. If the problem c[...]
-
Page 69
Overview of DFE-Gold Module Shutdown Procedure Matrix DFE-Gold Series Modules Hardware Installation Guide 4-9 Overview of DFE-Gold Module Shut down Procedure The DFE ‐ Gold module s installed in a Mat rix N3 or Matrix N7 chassis are inter dependent and operate under a single [...]
-
Page 70
Overview of DFE-Gold Module Shutdown Procedure 4-10 Troubleshooting Recommended Shut down Procedure Using OFFLINE/RESET Switch Before pulling a DFE ‐ Gold module out of a chas sis, press or tap on its OFFLINE/RESET switch for less than 1 second. Its CPU LED ch[...]
-
Page 71
Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide A-1 A Specifications This appendix provides information about the foll owing: • DFE ‐ Gold Module Specifications (page A ‐ 1) • COM Po r t Pinout Assignments (page A ‐ 3) • Regulatory Compliance (page A ‐ 4)[...]
-
Page 72
DFE-Gold Module Specifications A-2 Specifications 4H4203-72 Ports 1 through 72 Seventy- two, 10BASE-T/100BASE-TX compliant ports through six RJ21 connectors. 4H4202-72 Ports 1 through 72 Seventy- two, 10BASE-T/100BASE-TX compliant ports through 72 RJ45 connectors. 4H4284-49 Ports 1 through 48 Forty-eigh t, 100BASE-FX multimode fi ber-optic complian[...]
-
Page 73
COM Port Pinout Assignments Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide A-3 COM Port Pinout Assignment s The COM port is a serial communications port for loc al access to Local Management. Refer to Ta b l e A ‐ 2 for the COM port pin a[...]
-
Page 74
Regulatory Compliance A-4 Specifications Regulatory Compliance The 4H4282 ‐ 49, 4H4283 ‐ 49, 4H4203 ‐ 72, 4H4202 ‐ 72, 4H4284 ‐ 49, and 7G ‐ 6MGBIC mee t the safety and electromagnetic compatibility (EM C) requirements listed in Ta b l e A ‐ 3 : T able A-3 Complia[...]
-
Page 75
Matrix DFE-Gold Series Modules Hardware Installation Guide B-1 B Mode Switch Bank Settings and Optional Installations This appendix covers the following items: • Required T ools (page B ‐ 1) • Setting the Mode Switches (page B ‐ 2) • Memory Locations and Replacement Procedure s ?[...]
-
Page 76
Setting the Mode Switches B-2 Mode Switch Bank Settings and Optional Installations Setting the Mode Switches Figure B ‐ 1 and Figure B ‐ 2 show the location of the mode switches and the switch settings for normal operation. These switches are set at the [...]
-
Page 77
Setting the Mode Switches Matrix DFE-Gold Series Modules Hardware Installation Guide B-3 Figure B-1 Mode Switch Location on 4H4282-49 and 4H4283-49 1 Mode switch bank (located in same location on both the 4H4282-49 and 4H4 283-49) Figure B-2 Mode Switch Location on 4H4203-72 1 Mode switch bank 4H4282-49 F AST ENET DFE 1 2 3 4 5 6 ➀ ON 12 34 5 678[...]
-
Page 78
Setting the Mode Switches B-4 Mode Switch Bank Settings and Optional Installations Figure B-3 Mode Switch Location on 4H4202-72 1 Mode switch bank Figure B-4 Mode Switch Location on 4H4284-49 1 Mode switch bank ➀ 1 2345678 ON COM OFFLINE / RESET CPU MGMT GROUP GROUP SELECT GROUP 1 GROUP 2 GROUP 3 1X 6X 7X 12X 13X 18X 19X 24X 1 2 3 4H4202-72 F AST[...]
-
Page 79
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-5 Memory Locations and Replacement Procedures In the event that the Dual In ‐ line Memory Module (DIMM) or DRAM Single In ‐ li ne Memory Module (SIMM) (FLASH memory) [...]
-
Page 80
Memory Locations and Replacement Procedures B-6 Mode Switch Bank Settings and Optional Installations Figure B-6 DIMM and DRAM SIMM Locations (4H4203-72) 1 DRAM SIMM 2 DIMM 3 Main PC board Figure B-7 DIMM and DRAM SIMM Locations (4H4202-72) 1 DRAM SIMM 2 DIMM 3 Main PC board  À Á G R O U P 1 G R O U P 2 G R O U P 3 G R O U P 4 7 2X 7 2X 6 1X 6 1[...]
-
Page 81
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-7 DIMM Replacement Procedure (4H4282-49 and 4H4283-49) To remov e and replace the DRAM SIMM on the 4H4282 ‐ 49 or 4H4283 ‐ 49, ref er to Figure B ‐ 8 and Figure B ‐ 9 re[...]
-
Page 82
Memory Locations and Replacement Procedures B-8 Mode Switch Bank Settings and Optional Installations 2. Refer to Figure B ‐ 9 . Push the connector arms aw ay from the memor y module to release it from the connector . 3. Remove the module from the connector[...]
-
Page 83
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-9 Removing the DRAM SIMM from 4H4203-72 To remov e the existing DRAM SIMM, proceed as follows: 1. Locate the DRAM SIMM connector on the main PC board. Refer back to [...]
-
Page 84
Memory Locations and Replacement Procedures B-10 Mode Switch Bank Settings and Optional Installa tions 3. Pull the DRAM SIMM straight up and remove it from the connector . Installing the DRA M SIMM on 4H4203-72 To install the DRAM SIMM, refer to Figure B ‐ 12 and proc[...]
-
Page 85
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-11 DRAM SIMM Replacement (4H4202-72) Figure B-12 Installing the DRAM SIM M on 4H4203-72 1 Connector arms 3 Connector fingers 2 DRAM SIMM 4 Alignment notches (2) À Ã Á Ã À Â Note: Because of the complexity of correctly replacing the large d[...]
-
Page 86
Memory Locations and Replacement Procedures B-12 Mode Switch Bank Settings and Optional Installa tions DIMM Replacement Proc edure (All DFE Modules) In the event that the DIMM need s to be replaced, the following sec tions explain how to remove and install the DIMM. [...]
-
Page 87
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-13 Inst alling the DIMM To install a DIMM, refer to Figure B ‐ 14 and proceed as follows: 1. Insert the DIMM down between the connector fingers . 2. Pivot the DIMM [...]
-
Page 88
Memory Locations and Replacement Procedures B-14 Mode Switch Bank Settings and Optional Installa tions[...]
-
Page 89
Index-1 Index Numerics 100BASE-FX connections 3-18 requirements 2-2 100BASE-TX connections 3-1 1 requirements 2-2 10BASE-T connections 3-1 1 , 3-15 requirements 2-1 4H4202-72 introduction to 1-3 4H4203-72 introduction to 1-3 4H4282-49 introduction to 1-2 4H4283-49 introduction to 1-2 4H4284-49 introduction to 1-3 C Cable connections 4H4282-49 or 4 [...]
-
Page 90
Index-2 Matrix N3 chassis module installation into 3-9 Matrix N5 chassis module installation into 3-9 Memory replacement of DRAM B-12 Memory locations DIMM and SIMM B-5 Mode Switch setting of B-2 Module features 1-2 , 1-3 N NEM 3-3 Network connecting to 3-10 Network expansion module 3-3 Network Requirements list of 2-1 O OFFLINE/RESET button 4-10 O[...]