Epson 3010 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 88 pages
- 4.03 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Home Theater Screen
Epson 3010E
88 pages 4.03 mb -
Home Theater Screen
Epson 5010E
84 pages 2.46 mb -
Home Theater Screen
Epson 1430Wi
366 pages 17.88 mb -
Home Theater Screen
Epson 5010
84 pages 2.46 mb -
Home Theater Screen
Epson 85HD
80 pages 2.64 mb -
Home Theater Screen
Epson 800
80 pages 2.15 mb -
Home Theater Screen
Epson 1420Wi
366 pages 17.88 mb -
Home Theater Screen
Epson 3010
88 pages 4.03 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Epson 3010. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Epson 3010 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Epson 3010 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Epson 3010 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Epson 3010
- nom du fabricant et année de fabrication Epson 3010
- instructions d'utilisation, de réglage et d’entretien de l'équipement Epson 3010
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Epson 3010 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Epson 3010 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Epson en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Epson 3010, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Epson 3010, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Epson 3010. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
PowerLite ® Home Cinema 3010/3010e Home Theater Projector User’ s Guide pl3010_3010e_UG.boo k Page 1 Wedne sday, September 7, 2 011 6:28 PM[...]
-
Page 2
2 Contents Contents Introduction 6 Projector Parts 7 Remote Control 9 Optional Accessories 10 Registration and Warranty 10 Using This Manual 11 Setting Up the Projector 12 Choose a Location 12 Installing the Project or 16 Connecting the Cables 18 Connecting Video and Computer Equipment 18 Making Other Connections 20 Installing Batteries in the Remo[...]
-
Page 3
Contents 3 Advanced Color Adjustments 33 Adjusting the Gamma Setting 33 Adjusting RGBCMY 35 Locking the Projector 36 Making Detailed Adjustments 37 Using the Menu Syste m 37 Changing How the Menus Display 38 Adjusting the Picture Quality 39 Input Brightness Settings 39 Sharpness and Picture Quality Settings 41 Color Settings 43 3D Setup 45 Adjustme[...]
-
Page 4
4 Contents Changing HDMI Link Settings 59 Maintenance 60 Cleaning the Lens 60 Cleaning the 3D Glasses 61 Cleaning the Projector Case 61 Cleaning and Replacing the Air Filter 62 Replacing the Lamp 64 Resetting the Lamp Usage Timer 67 Checking the Proj ector Status 67 Storing the Projector 68 Transporting the Projector 68 Problem Solving 69 What To D[...]
-
Page 5
Contents 5 Notices 84 Important Safety Information 84 FCC Compliance Statement 86 Copyright Notice 87 A Note Concerning Responsible Use of Copyrighted Materials 87 Trademarks 88 pl3010_3010e_UG.boo k Page 5 Wedne sday, September 7, 2 011 6:28 PM[...]
-
Page 6
6 Introduction Introduction The PowerLite ® Home Cinema 3010/3010e proje ctor lets you enjoy theater-quality 3D images in the re laxing environment of your ow n home. Designed especially for home cinema use, it offers these outstanding features: ■ Native 1080p (1920 × 1080 ) resolution, dynamic contrast r atio up to 40,000 :1 and up to 2200 lum[...]
-
Page 7
Introduction 7 Projector Parts Control panel Air exhaust Lens cover Adjustable foot HDMI ports External 3D IR port Remote receiver Horizontal ke ystone slider Zoom ring Front Back Lamp cover Cable clip hole Air intake Air filter cover Focus ring Speakers Power inlet Cable clip hole Kensington ® lock port Audio (L-R) port Component port RS-232C por[...]
-
Page 8
8 Introduction Brightness sensor Escape button Power button Mounting bracket attachment points Bottom Projector Control Panel Front adjustable feet Power light Source button Volume/horizontal keystone buttons Vertical keystone butto ns Lamp light Temperature light pl3010_3010e_UG.boo k Page 8 Wedne sday, September 7, 2 011 6:28 PM[...]
-
Page 9
Introduction 9 Remote Control Source buttons Switch between equipment connected to the projector On button Turns projector on Menu navigation buttons Split button Toggles the Split Screen function on or off Color Mode button Quickly change color settings to match room lighting Aspect button Changes the picture’s aspect ratio A/V Mute button Tempo[...]
-
Page 10
10 Introduction Optional Accessories Epson provides the following optional accessories for the projector: In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized Epson reseller. To find the nearest reseller, plea se call 8 00-GO-EPSON [...]
-
Page 11
Introduction 11 Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troublesh ooting tips, important safety instructions, specifications, and warranty information. Please follow these guidelines as you read through the manual: Warning: Must be followed care[...]
-
Page 12
12 Setting Up the Projector Setting Up the Projector Follow the instructions in this section to ch oose a location for the projector, connect the cables, and display an image. Choose a Location You can install the projector for the viewing setups shown below, as well as rear pr ojection. Center Ceiling Side pl3010_3010e_UG.boo k Page 12 Wednesday, [...]
-
Page 13
Setting Up the Projector 13 Keep the projector l evel and place it at a height wh ere its lens is centered be tween the top and bottom of the screen. If this isn’t possible, use the horizontal keystone sl ider and vertical keystone buttons to adjust the image (see page 24). Note: Imag e quality may be reduced if excessive keystone correction is u[...]
-
Page 14
14 Setting Up the Projector To determine the exact image size when you know the proj ection distance (or the exact projection distance when you know the de sired image size), you can use the Image Size Calculator. This program is avai lable on the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada). Also keep these considerations[...]
-
Page 15
Setting Up the Projector 15 In order to view 3D images correctly, 3D gla sses must be worn within proper range of the projector. Use the image below to determine the ideal distance for 3D projection (the shading represents the 3D viewing area): Use the optional external 3D emitter if you cannot view the 3D image normally or if the projector is loca[...]
-
Page 16
16 Setting Up the Projector Installing the Projector To install the projector, you first need to dete rm ine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 13 as a guide to pos itioning the projector. To suspend the projector from a ceiling, you wi ll need the optional pr ojector mount designed [...]
-
Page 17
Setting Up the Projector 17 The following illustrations show the dimensions of the projec tor: Center of lens 3.2 in. (80 mm) 5.5 in. (139.6 mm) 8.3 in. (210 mm) 16.5 in. (420 mm) 11.8 in. (300 mm) 2.4 in. (60 mm) 5.9 in. (150 mm) 2.8 in. (70 mm) 14.4 in. (365 mm) 6.3 in. (160 mm) pl3010_3010e_UG.boo k Page 17 Wednesday, Septemb er 7, 2011 6:28 PM[...]
-
Page 18
18 Setting Up the Projector Connecting the Cables Connecting Video and Computer Equipment You can connect the projector to many type s of video equipment, such as a Blu-ray Disc ™ /DVD player, digit al tuner, cabl e or satellit e box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple ® M[...]
-
Page 19
Setting Up the Projector 19 For best result s, connect your vide o equipment to the HDMI port, if possible. If your equipment doesn’t support HDMI, connect it to either the Component (for high quality, component video) or Video (for composite video) port. When you connect an HDMI cable to the projec tor, it is recommended that you fasten it with [...]
-
Page 20
20 Setting Up the Projector Making Other Connections Connect the power cable and other cables described below, depending on how you plan to use the projector. ■ Plug the power cable into the projector and a grounded electrical outlet. ■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to the RS-232C port. ■ [...]
-
Page 21
Setting Up the Projector 21 Installing Batteries in the Remote Control The remote control uses two AA batteries. Warning: Keep batteries away from children. If a ba ttery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown. 3. Insert the tab on the cover and press it dow[...]
-
Page 22
22 Setting Up the Projector Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 36 for de tails. If you’ll be using the projector at an altitude abov e 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projecto r at the high altitude air pressure. Se e page 55 fo[...]
-
Page 23
Setting Up the Projector 23 If you press the Source button on the projector, you see a list of available sources. Press the Source button to move through the list and select the desired source. Note: If an image does not appear, se e “Problem Solving” on page 69. To temporarily turn off the image and darken the screen, press the A/V Mute button[...]
-
Page 24
24 Setting Up the Projector Positioning the Image If the projector is not centered in front of the screen, use the horizontal keystone slider, horizontal keystone buttons, volume butt ons on the projector, and vertical keystone buttons to correct the shape of the image. Note: You can display a test pattern to help adjust the image position by press[...]
-
Page 25
Setting Up the Projector 25 If one side of the image is taller than the other, make sure the projector is parallel to the screen. If necessary, adjust the front feet so that the projector is horizontal. Your projector automatically adjusts images th at are wider at the top or bottom, but if necessary, you can also use the vertical keystone buttons [...]
-
Page 26
26 Making Basic Adjustments Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 37. Focusing and Zooming Use the focus ring to sharpen the image. Use the zoom ring to reduce or enlarge the image[...]
-
Page 27
Making Basic Adjustments 27 Choosing the Aspect Ratio In many cases, video signals are automatically resized to fit on your screen when Auto is selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the Aspect button on the remote control. Select one of these settings: ■ [...]
-
Page 28
28 Making Basic Adjustments Viewing 3D images To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports on your projector. You will also need a pair of Epson or Epson-compatible M-3Di active shutter glasses. 1. Turn on and begin playback on the 3D-compatible video device. 2. Press the 2D/3D button on the remot[...]
-
Page 29
Making Basic Adjustments 29 Projecting in Split Screen mode You can use the Split Screen fe ature to simult aneously project two images from different image sources next to each other. You can cont rol the Split Scre en feature using the remote control or the projector menus. Note: While you use the Split Screen feature, other projector features ma[...]
-
Page 30
30 Making Basic Adjustments Note: Depending on the video input signals, the imag es may not appear at the same size even if you choose the Equal setting. 5. To choose the audio you want to hear, select the Audio Source setting, press Ent er , select an audio option, press Enter , and press Menu to exit. Note: Select Auto to hear audio from the la r[...]
-
Page 31
Making Basic Adjustments 31 3. Do one of the following to start your slide show: ■ To display an individual image, press th e arrow buttons to highlight the image and press Enter . (Press the Esc button to return to the file list screen.) ■ To display a slide show of all the images in a folder, press the arrow buttons to highlight the Slideshow[...]
-
Page 32
32 Making Basic Adjustments Choosing the Color Mode You can change the Color Mode to automatically adjust bright ness, contrast, and color, letting you quickly optimize the projected imag e for various lighting environments. You can also select a different color mode for each inpu t source—which is useful if you view different types of images fro[...]
-
Page 33
Making Basic Adjustments 33 ■ Living Room for watching television programs during the day. ■ Natural for projecting natural, accurate colors in a dimly lit room. ■ 3D Dynamic for projecting the brightest 3D pictur e available (only available when the projector is in 3D Mode). ■ 3D Cinema for viewing 3D movies in a dimly lit room (only avail[...]
-
Page 34
34 Making Basic Adjustments Note: This settin g cannot be used when the Color Mode is set to Auto (see page 32). 1. Press the Menu button. Select Image from the main menu. Select Advanced and then Gamma . You see the following dis played on the screen: 2. Do one of the following: ■ Select one of the numeric co rrection values using the u or d but[...]
-
Page 35
Making Basic Adjustments 35 Adjusting RGBCMY Use this feature to adjust the hue, saturation, and b rightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components (not available when Auto is selected as the Color Mode). 1. Press the RBGCMY button. You see the following displayed on the screen: 2. Use t[...]
-
Page 36
36 Making Basic Adjustments Locking the Projector The projector includes two lock settings to pr event the image from being accidentally changed once it’s adj usted, and to ke ep children from tu rning on the projector without adu lt supervision. To access the lock settings, follow these steps: 1. Press the Menu button on the remote control. 2. S[...]
-
Page 37
Making Detailed Adjustments 37 Making Detailed Adjustments You can use the projector’s on-scree n menus to make detailed adjustment s to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Using the Menu System You can access the menu [...]
-
Page 38
38 Making Detailed Adjustments 4. When you’re finished, press the Esc button to return to the previous menu or press the Menu button to exit th e menu system. To display one of the line menus, press the Enter button. You see a display like this at the bottom of the image: ■ Press the l or r button to adjust the setting. ■ Press the Menu or Es[...]
-
Page 39
Making Detailed Adjustments 39 Adjusting the Picture Quality Before fine-tuning the image using these adjustments, make sure you have already se lected the best Color Mode for your picture and viewing environment, as described on page 32. Then use the settings in this section to finish adjusting the picture to your liking. Most image quality settin[...]
-
Page 40
40 Making Detailed Adjustments ■ Auto Iris Note: This settin g cannot be used when the Color Mode is set to Auto (see page 32). When this setting is on, the light output is automatically adjusted according to th e brightness of the image. Select either Normal or High Speed to indicate how quickly you would like the projector to respond to changes[...]
-
Page 41
Making Detailed Adjustments 41 Sharpness and Picture Quality Set tings If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it. ■ Sharpness Use this function to make lines and edges appe ar more distinct in the image. This setting is stored separately for each image sour ce and color mode setting.[...]
-
Page 42
42 Making Detailed Adjustments ■ Progressive Converts interlaced to progressive si gnals. The projector uses 3D DigiScan ™ HD Circuitry Processing for video-sourced images. Leave the setting on Film/Auto for viewing movies on a player that produces interlaced output. Select Video for watching videos captured with a video camera. Se t to Off whe[...]
-
Page 43
Making Detailed Adjustments 43 Color Settings If the image colors don’t look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune th e picture with the remaining settings. Most colo r settings are stored sepa[...]
-
Page 44
44 Making Detailed Adjustments ■ RGB Note: This settin g cannot be used when the Color Mode is set to Auto (see page 32). Use the RGB settings to fine-tune the color of the image. You can adjust the offset and gain for each signal color (red, green, and blue). Use Offset to adjust darker shades and Gain for the lightest shades. ■ RGBCMY Note: T[...]
-
Page 45
Making Detailed Adjustments 45 3D Setup Use this menu to adjust 3D brightness, th e 3D display format and other 3D settings. Note: You should only adjust the 3D For mat and Inverse 3D Glasses settings if 3D images aren’t displaying correctly. Changing these settings unnecessarily may cause problems with 3D projection. ■ 3D Display Enables or di[...]
-
Page 46
46 Making Detailed Adjustments ■ 3D Viewing Notice Enables or disables the viewing notice that is displayed when 3D mode is activated. Adjustments for Computer Images In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, thes e settings are adjusted automatically [...]
-
Page 47
Making Detailed Adjustments 47 WirelessHD Settings Use these options to m anage the Wireless HD connection and access the Wirel essHD reception monitor. ■ Device Connections Select this option to display a list of available WirelessHD devices. Use the arrow keys to navigate the menu and press Ent er to select a device. ■ WirelessHD Enables or d[...]
-
Page 48
48 Making Detailed Adjustments ■ Reset Select this option to reset al l WirelessHD settings and return them to their default values. Split Screen Setup Press the Menu button while in Split Screen mode to access this menu. ■ Screen Size Adjusts the size of the two screens. Choose Larger Left to increase the size of the left screen, Larger Right [...]
-
Page 49
Making Detailed Adjustments 49 ■ Swap Screens Select this option to quickly switch the imag es on the left and right sides of the split screen display. ■ Audio Source Use this setting to select which screen’s aud io you want to hear while in split screen mode. Note: Select Auto to hear audio from either the la rgest screen or the scree n on t[...]
-
Page 50
50 Making Detailed Adjustments Selecting Memory Settings You can easily recall the memory settings by using the Memory button on the remote control. 1. Press the Memory button on the remote control. 2. Select Load Memory . 3. Use the arrow buttons to selec t the desired setting, then press the Enter button. After a moment, the image appears on the [...]
-
Page 51
Making Detailed Adjustments 51 Deleting Saved Memory Settings You can clear all your me mory settings at once. 1. Press the Menu button on the remote control. 2. Open the Reset menu, then select Reset Memory . 3. Select Yes , then press the Enter button to delete the memory settings. Note: You can delete memo ry settings one at a time with the Eras[...]
-
Page 52
52 Making Detailed Adjustments 3. Do one of the following: ■ Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. You should reset the lamp timer only when you install a new projector lamp. See page 67 f or more inform ation. ■ Select Reset Memory to clear all memory settings. ■ Select Reset All to return all projector [...]
-
Page 53
Making Detailed Adjustments 53 ■ Aspect This setting lets you change the aspect ra tio of your image, and works the same as pressing the Aspect button on the remote control. See page 27 for more information. Note: When disp laying 720p, 1080i, or 1080p signals through the HDMI or Compon ent video port, the aspect ratio is automatically selected a[...]
-
Page 54
54 Making Detailed Adjustments Other Setup Options ■ Projection You can select different options for projecting th e image: Front , Front/Ceiling , Rear , Rear/Ceiling . Note: Only th e Front option is available when the Color Mode is set to Auto . ■ Direct Power On Sets projection to start without pressing the P power button on the projector o[...]
-
Page 55
Making Detailed Adjustments 55 ■ Sleep Mode Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.) Select 5min. , 10min. , or 30min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. 30m[...]
-
Page 56
56 Using WirelessHD Using WirelessHD You can use the included Wire lessHD Transmitter (PowerLite Home Cinema 3010e only) to wirelessly stream HD content from a video device to the projector. Placing the WirelessHD Transmitter Place the WirelessHD Transmitter so that the unit’s light s face the front of the projector. Make sure the transmitter is [...]
-
Page 57
Using WirelessHD 57 Setting Up a WirelessHD Connection To prepare your device to work with the WirelessHD button, follow these steps: 1. Follow the instructions on the previous page and place the trans mitter within range of the projector. 2. Plug the AC adapter into the transmitter and an electrical outlet. 3. Connect an HDMI cable to your video d[...]
-
Page 58
58 Using HDMI Link Using HDMI Link When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them using the HDMI Link control buttons on the projector’s remote control. This lets you use just one remote control to op erate many commonly used features on all your devices. In a typical configuration, your DVD p[...]
-
Page 59
Using HDMI Link 59 4. Set up your connected devices so their HD MI CEC-compatible fu nctions are enabled. For details, refer to the device manuf acturer’s documentation. Changing HDMI Link Settings 1. Press the HDMI Link button on the projector’s remote control. 2. Select Device Connections . You see this screen: 3. Use the u and d arrow button[...]
-
Page 60
60 Maintenance Maintenance Your projector needs little maintenance. All you ne ed to do on a reg ular basis is keep the le ns clean. You also may need to clean the air filte r to prevent overheating. Warning: Before you clean any part of the projector, turn it off an d unplug the power co rd. Never open any cover on the projector, except the lamp a[...]
-
Page 61
Maintenance 61 Cleaning the 3D Glasses Use the included lint-free cloth (do not use paper towels) to gently wipe the 3D glasses whenever you notice dust or dirt on the surface. Caution: Never rub the 3D glasses with abrasive materials. Cleaning the Projector Case Before you clean the case, turn off th e projector and unplug the power cord. ■ To r[...]
-
Page 62
62 Maintenance Cleaning and Replacing the Air Filter Your projector includes an air filter to ensure th e best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and cause overhe ating and damage to the projector. You can replace the air filter while the projecto r is mounted to the c[...]
-
Page 63
Maintenance 63 5. Gently tap both sides of the air filter against a hard surface four or five times to remove loos e dust from the air filter. Note: Do not use excessive force when tapping the air filte r, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean i t. Do not used canned air,[...]
-
Page 64
64 Maintenance Replacing the Lamp The projection lamp lasts for u p to 4000 hours in Norm al mode. You can use the Info men u to check how long it’s been in use (see page 67). It’s time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The projector’s lamp light flashes oran ge or red at half-second i[...]
-
Page 65
Maintenance 65 5. Remove the lamp cover as shown. 6. Loosen the screws securing the lamp (they don’t come all the way out). 7. Lift up the lamp handle and gently pull the lamp out of the projector. Warning: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in t[...]
-
Page 66
66 Maintenance 8. Gently insert the new lamp into the proj ector and press the handle down. Tighten the screws. Caution: Don’t touch the glass portion of the la mp assembly. Touching the glass could result in premature lamp failure. 9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.) 10. Tighten the lamp co[...]
-
Page 67
Maintenance 67 Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in and press the P power button on the projector or the On button on the remote control. Then follow these steps to reset the lamp usage timer: 1. Press the Menu button on the projector or remote control. 2. Use the menu navigation buttons to open the Re[...]
-
Page 68
68 Maintenance Storing the Projector If you need to store the projector for an ext ended time, do the following: ■ Make sure the temperature of the storage area is within 14 to 140 °F (–10 to 60 °C). ■ Attach the lens cover and retract the feet. ■ Remove the batteries from the remote control . ■ Pack the projector in its original packag[...]
-
Page 69
Problem Solving 69 Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the [...]
-
Page 70
70 Problem Sol ving Power button is on, power light flashes blue The projector is warming up. Wait for the picture to appear. The projector is cooling down. Wa it unti l the power light stops flashing and rem ains off. Then unplug the projector, or pr ess the P power button on the projector or the On button on the remote control to turn it back on.[...]
-
Page 71
Problem Solving 71 Solving Picture Problems You cannot turn on the projector. ■ Make sure the power cord is connected. Then wait a moment for the P power button to light up before pressing the P power button on the projector or the On button on the remote control. ■ If you’ve set the Control Panel Lock , the control panel buttons are disabled[...]
-
Page 72
72 Problem Sol ving 3D content does not display or does not display correctly. ■ Press the 2D/3D button on the remote control to switch to 3D viewing mode, if necessary. ■ Make sure that you are within the 3D viewing range (see page 1 2). ■ Check that your video device and media are both 3D-compatible. Refer to the documentation that came wit[...]
-
Page 73
Problem Solving 73 ■ If the function key doesn’t let you display simultaneously on both screens, you might need to use the Display utility in the Windows Control Panel to make sure that both the LCD screen and exte rnal moni tor port are enabled. From the Windows Control Panel, open the Display utility. In the Display Properties dialog box, cli[...]
-
Page 74
74 Problem Sol ving The picture is blurry. ■ Make sure the Input Signal is set correctly for your video equipment (see page 54). ■ There may be dirt on the lens. Clea n the le ns as des cribed on page 60. ■ Adjust the focus (see page 26). ■ Make sure the lens is not fogged by condensat ion. If you’ve just moved the projector from a cold e[...]
-
Page 75
Problem Solving 75 Solving Remote Control Problems The projector doesn’t respond to remote control commands. ■ Make sure you’re within about 32 feet (10 m) of the projector, and the remote control is aimed at the projector’s front or back sensor within the ranges shown below. ■ You may need to replace the remote control batterie s (see pa[...]
-
Page 76
76 Problem Sol ving ■ Make sure that your projector is conne cted to the correct WirelessHD device. See“WirelessHD Settings” on page 47 for more information. ■ You may need to reset the WirelessHD co nnection. Turn off both the WirelessHD Transmitter and the projector. Start playback on your video device, then turn on the WirelessHD Transmi[...]
-
Page 77
Problem Solving 77 Where to Get Help Internet Support Epson provides technical assistance 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Here you can access trou bleshooting information, download product documentation, and receive technical advice through email . Speak to a Suppo rt Representative To use the Epson Privat e[...]
-
Page 78
78 Specificati ons Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.61 inch (15.5 mm) wide Lens F=1.51 to 1.99 Resolution (native format) 1920 × 1080 pixels, 1080p Brightness Normal mode: White light output up to 2200 lumens (ISO 21118 standard) Color light output up to 2200 lumens ECO mode: White light ou[...]
-
Page 79
Specifications 79 Power consumption 230 W Lamp life 4000 hours (Norm al mode) 5000 hours (ECO mode) Part number V12H010L68 Remote Control Range Approximately 32 feet (10 m) Batteries AA × 2 WirelessHD Transmitter (H ome Cinema 3010e only) Usable frequency 60 GHz band (2 – 3 ch) AC adapter 4 .75 – 5.25 V DC Transmission range 32 feet (10 m) Wir[...]
-
Page 80
80 Specificati ons Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 V AC: 3.7 A 200 to 240 V AC: 1.7 A Power consumption 100 to 120 V AC: Operating: 372 W (Normal mode) 285 W (ECO mode) Standby: 0.25 W (with HDMI Link enabled) 220 to 240 V AC: Operating: 358 W (Normal mode) 274 W (ECO mode) Standby: 0.35 W (with HDMI Link enabled) Env[...]
-
Page 81
Specifications 81 Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these format s as composite or component video—which it accepts through the Video and Component ports, respectively. The projector also supports digita l video (SDTV, H[...]
-
Page 82
82 Specificati ons Analog RGB (computer display) HDMI 3D mode WirelessHD Signal Refresh rate (Hz) Resolution VGA 60/72/75/85 640 × 48 0 SVGA 56/60/72/ 75/85 800 × 600 XGA 60/70/75/85 1024 × 7 68 SXGA 70/75/85 60/75/85 60/75/85 1152 × 864 1280 × 960 1280 × 1024 WXGA 60 60 60/75/85 1280 × 768 1360 × 768 1280 × 800 Signal Refresh rate (Hz) Re[...]
-
Page 83
Specifications 83 ESC/VP21 Command Codes You can use an AV controller with a 9-pin null mode m serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada). HDTV 720p 1080i 1080p 50/60 50/60 24/50/60 128[...]
-
Page 84
84 Notices Notices Important Safety Information Follow these safety instructions when setting up and usi ng the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■ If you or any viewer experiences the following sy mptoms or othe[...]
-
Page 85
Notices 85 ■ The following people should limit 3D content viewing: People with a history of photosensitivity People with heart disease People in poor health People who are sleep deprived People who are physically tired People under the influence of drugs or alcohol Anyone who has ever experienced epileptic seizures or sensory disturbances trigger[...]
-
Page 86
86 Notices ■ Allow the lamp to cool for one hour before replacing it. ■ Unplug the projector during lightnin g storms or when not in use for extended periods. ■ Don’t place the projector or remote cont r ol on top of heat-producing equipment. ■ If you use the projector in a coun try other than where you purchased it, use the correct power[...]
-
Page 87
Notices 87 interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused int erfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. For Canadian Users This Class B digital apparatus meet s all requir[...]
-
Page 88
88 Notices Trademarks Epson, PowerLite, and C 2 Fine are registered tradem arks, 1080Perfect is a tradem ark, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademar k, DigiScan and AccuCinema are trademarks, and Extra Car e and Epson Connection are service marks of Epson America, Inc. [...]