Epson 600P manuel d'utilisation

EPSON ® PowerLite ® 600p/811p/820p Multimedia Projector User’ s Guide 600-811-820.book Page i Tuesd ay, April 30, 2002 10:17 AM[...]

ii Important Safety Information WARNING : Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Exc[...]

C iii Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Getting the Most from Your Projector . . . . . . . . . . . . . . . . . . 2 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . . 3 Registration and War[...]

iv Controlling the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Switching Between Picture Sources . . . . . . . . . . . . . . . . 29 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Turning Off the Picture and Sound . . . . . . . . . . . . . . . 30 Shutting Down the Projector . . . . . . . . . . . . [...]

v Customizing Projector Features . . . . . . . . . . . . . . . . . . . . . . 55 Setting Advanced Features . . . . . . . . . . . . . . . . . . . . . . . 57 Viewing Lamp Usage and Other Information . . . . . . . . . . . . 58 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . . . . . 59 5 Maintaining and Transporting the Projector . [...]

vi Connecting to a High-End Workstation . . . . . . . . . . . . . . . 93 Connecting to a DVI Video Source . . . . . . . . . . . . . . . . . . . 93 B Appendix B: Notices . . . . . . . . . . . . . . . . . . . . . . . . . 95 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 95 Remote Control Information . . . . . . . . . . [...]

W Welcome 1 - Welcome T he EPSON ® PowerLite ® 600p, 811p , and 820p are portable projectors that weigh less than 10 pounds and offer up to 2500 ANSI lumens of brightness. From classrooms to aud itoriums, your full-color presentations and videos will be bright and visible even in ordinary room lighting. Images are displayed at a resolution of 102[...]

2 Welcome Getting the Most from Your Projector Your EPSON PowerLite projector is a highly versatile p resentation tool. You can connect it to one or two computer sources and up to three video sources and easily switch between them. You can also include sound for up to three of the sources. Depending on your presentation, you can take advantage of a[...]

Welcome 3 If you ’ re permanently installing the projector, you may wish to connect external speakers or a public address system to the projector ’ s Audio Out port; see page 83. ■ Controlling the Projector from a Computer If you want to be able to control the projector ’ s settings from a computer (for example, if the projector is ceiling-[...]

4 Welcome ■ Owner’s Kit Includes your Quick Setup sheet, warranty brochures, and EPSON PrivateLine ® Support card. Store this User ’ s Guide in the folder and keep the folde r with your projector at all times. ■ Built-in help system Provides assistance for common problems. Available from the Help button on the projector or the remote contr[...]

Welcome 5 Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you ne ed to send the projector to another location. If you are moving the projector by hand, use a carrying case (such a[...]

6 Welcome Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) ■ To receive a component video signal from a VCR or other video device, you need a VGA-to-component video cable. You can [...]

Welcome 7 Optional Accessories To enhance your use of the projector, EP SON provides the following optional accessories. You can purchase these accessories from your dealer, by calling EPSON at (800) 87 3-7766, or by visiting the EPSON Store SM at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-77 66 for dealer referral. Prod[...]

8 Welcome 600-811-820.book Page 8 Tuesday, April 30, 2002 10:17 AM[...]

1 Setting Up the Projector 9 1 Setting Up the Projector T his chapter te lls you how to se t up the project or for a laptop computer or video presentation. If you need to set up t he projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A. You ’ ll find instructions for the following in this chapt[...]

10 Setting Up the Projector Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. ■ Place the projector on a sturdy, level surface, approximately 2.85 to 41 feet from the screen. ■ Make sure there is plenty of space fo[...]

Setting Up the Projector 11 If you place the projector below the le vel of the screen, you ’ ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the distortion by pressing the Keystone button as described in the next chapter. If you place the projector l[...]

12 Setting Up the Projector Connecting to a Laptop Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks and iBooks, and hand-held devices. Connecting the Computer Cable Before you start, make sure your computer and the proje[...]

Setting Up the Projector 13 Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 41). This gives you more flexibility in delivering your presentation, since you won [...]

14 Setting Up the Projector Amplifying Computer Audio Your laptop probably has its own sound system; however, it may not be adequate for your presentation. If you need mor e volume or better sound quality, you can connect a stereo, mini-jack audio cable (not included). 1. Connect one end of the audio cab le to the Audio1 jack on the projector . 2. [...]

Setting Up the Projector 15 Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. The projector supports HDTV, NTSC, PAL, and SECAM, and automatically detects the video format. The projector can receive composite video, S-Video, and compon[...]

16 Setting Up the Projector Connecting the RCA A/V Cable Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of th e A/V cable to the projector ’ s yellow Video jack. 2. Connect the other yellow plug to the video-out jack on your video source. 3. Connect the red [...]

Setting Up the Projector 17 Connecting an S-Video Cable If your video source has an S-Video jack, you can use it to project a higher quality video image. However, you ’ ll need an S-Video cable, which may be included with your video source, or can be purchased separately. Before starting, make sure the projector and your DVD player or other video[...]

18 Setting Up the Projector Connecting a Component Video Cable If your video source has component (blue, green, and red) connectors, you can use them to project a higher qual ity video image. However, you ’ ll need a VGA-to-component video cable, which is available from EPSON; see page 7. Before starting, make sure the projector and your DVD play[...]

2 Using the Projector 19 2 Using the Projector O nce you ’ ve connected the projector to your computer or other equipment (as described in Chapter 1 or Appendix A), you ’ re ready to turn on the projector, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional [...]

20 Using the Projector Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you ’ ve connected to it. You can turn on your computer and video equipment in any order, but if you h[...]

Using the Projector 21 5. Press the red Power button on top of the projector. The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the No Signal message displayed. This is normal. 6. Do one of the following: ■ If you ’ re pr[...]

22 Using the Projector What To Do If You See a Blank Screen If you see a blank screen or a blue screen with the No Signal message after turning on your computer or video source, try the following: ■ Make sure the cables are connected correctly, as described on page 12 (for laptops) or in Appendix A (for other systems). ■ Make sure the power lig[...]

Using the Projector 23 If you ’ re using a PowerBook or iBook with OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, sele ct Control Pa nels , then click Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. If[...]

24 Using the Projector If you're using Macintosh OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, sele ct System Preferences , then select Displays . 2. Make sure t he VGA Display dialog box is selected. 3. Click the Arrange tab. 4. Make sure t he[...]

Using the Projector 25 Focusing and Zooming Your Image Rotate the focus ring to sharpen the image. Rotate the zoom ring to reduce or enlarge the image. If the image still isn ’ t large enough, you may need to move the projector farther away from the sc reen. You can also use the E-Zoom button on the remote control to zoom in on a portion of the i[...]

26 Using the Projector Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector ’ s foot. 1. Stand behind the projector. Press the foot release button and lift the front of the projector. This unlocks the foot. 2. Once the image is positioned where you want it, release the button to lock the foot in [...]

Using the Projector 27 Adjusting the Image Shape If the projected image isn ’ t square or has a “ keystone ” shape, do one or more of the following: ■ If your image looks like or , you ’ ve placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. If[...]

28 Using the Projector Resizing the Image Some computer images need to be resized to display in the projector ’ s native resolution. If only part of your computer image is displayed, you can correct it with the Resize button. ■ Press the Resize button on the projector ’ s control panel (or on the remote control). The screen image is automatic[...]

Using the Projector 29 Controlling the Projector While giving your presentation, you may want to switch between picture sources, adjust the volume, or temporarily turn off the picture and sound. Follow the instructions below to access theses features from your projector ’ s control panel. You can also access these features, plus many others, usin[...]

30 Using the Projector Turning Off the Picture and Sound You can use the A/V Mute button on the control panel to darken your screen and turn off the sound. This is useful if you want to temporarily re-direct your audience ’ s attention without the distraction of a bright screen. ■ To turn off the picture and sound, press the A/V Mute button. Th[...]

Using the Projector 31 3. Press the Power button again. The power light flashes orange for about a minute and a half as the projector cools down. When the projector has cooled, the orange light stays on and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the Power button.[...]

32 Using the Projector 600-811-820.book Page 3 2 Tuesday, April 30, 2002 10:17 AM[...]

3 Using the Remote Control 33 3 Using the Remote Control T he remote control lets you access you r projector ’ s features from anywhere in the room — up to 30 feet away. You can use it to tur n the projector on and off, zoom in on a portion of your image, and highlight your presentation. If you ’ re using a computer and you ’ ve connected t[...]

34 Using the Remote Control Turning On and Using the Remote Control Before using the remote control, you need to install its batteries and turn it on as described below. Installing Batteries Follow these steps to install or replace the batteries: 1. Press the tab to release the battery compartment cover. 2. Remove the cover and insert the two AA ba[...]

Using the Remote Control 35 Using the Remote Control When using the remote control, stand within 30 feet of the projector. Point the remote control either at the front or bac k of the projector or at the screen (the projector ’ s front sensor can detect signals bounced off the screen). ■ Press the button for the function you want to use. See th[...]

36 Using the Remote Control Adjusting the Volume If you ’ ve connected an audio source to the projector, you can adjust the sound that ’ s output through the projector ’ s speakers. ■ To increase the volume, press on the right side of the Volume button. ■ To reduce the volume, press on the left sid e of the Volum e button. Turning Off the[...]

Using the Remote Control 37 Zooming Your Image You can zoom in on a portion of the image using the E-Zoom button on the remote control. 1. Press the E-Zoom button. A crosshair indicating the center of the zoom-in area appears on the screen. 2. Use the button to move the crosshair where you want it. 3. Press the right side of the E-Zoom button to en[...]

38 Using the Remote Control Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. If you ’ re using component video, you can display a second video (from a composite or S-Video source) in the window. First make sure you have connected your VCR[...]

Using the Remote Control 39 Highlighting Your Presentation You can highlight areas on the screen using the numbered buttons on the remote control. You can use these “ special effects ” features to annotate your presentation slides or call attention to your most important points. The following three highlighting tools are available: ■ Pointer [...]

40 Using the Remote Control Spotlighting Your Image With the Spotlight tool, you can highlight part of the screen. 1. To activate the spotlight tool, press button 2 on the remote control. A square spotlight appears on the image. You can continue pressing button 2 to switch between three spotlight sizes. 2. Use the button to move the spotlight wh er[...]

Using the Remote Control 41 Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 30 feet away. This gives you more flexibility, since you won ’ t need to stand near your computer to change slide[...]

42 Using the Remote Control ■ To double-click, press down twice on the left mouse button. ■ To click and drag, press down on the left mouse button and then tilt the button in the direction you want to drag. You can use the up and down arrow buttons on th e remote control to move the cursor or move through a PowerPoint presentation. This works o[...]

4 Fine-tuning the Projector 43 4 Fine-tuning the Projector Y ou can use the projector ’ s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use. This chapter covers the following information: ■ Using the menu [...]

44 Fine-tuning the Projector Using the Projector ’ s Menu System The eight projector menus let you adju st and customize the projector features from either the control panel or remote control: ■ The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, S[...]

Fine-tuning the Projector 45 Changing Menu Settings You can use the buttons on the control panel or remote control to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the control panel or the remote control. You see the menu sc reen: The eight menus are listed on the left, and the opt[...]

46 Fine-tuning the Projector 4. Use the Sync+ or Sync – button (control panel) or the button (remote control) to scroll through the list of options. (If a computer or video source isn ’ t connected, certain options may be unavailable.) 5. Use the Tracking – or Tracking+ button (control panel) or the button (remote control) to change the setti[...]

Fine-tuning the Projector 47 Adjusting the Image The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video (analog RGB), DVI computer video (digital RGB), composite or S-Video, component video, or RGB video (standard TV). Video men[...]

48 Fine-tuning the Projector Repositioning the Image Follow these steps to move the image to a diffe rent position: 1. Press the Menu button. You see the menu screen. 2. Press the button to select the Video menu. 3. Press to select the Position option. You see a positioning screen. 4. Use the Tracki ng and Sync buttons (control panel) or the button[...]

Fine-tuning the Projector 49 ■ Tint (NTSC video only) Adjusts the balance of green to magenta in the image. ■ Sharpness Adjusts the sharpness of the image. ■ Color Mode Corrects the vividness of image color. You can select from the following six settings, and save a different one for each computer and/or video source: sRGB : To use the sRGB s[...]

50 Fine-tuning the Projector Saving and Recalling Computer Settings When you are projecting from an analog computer source, you can save and recall settings (resolution, tracking, sync signal, and position) in up to five different combinations. This is useful if you use more than one computer with the projector; you can save the settings for each o[...]

Fine-tuning the Projector 51 Adjusting the Sound You can use the Audio menu to select the audio source or adjust the sound volume or treble/bass balance. 1. Press the Menu button. You see the menu screen. 2. Use the Sync – button (control panel) or the button (remote control) to highlight Audio . You see the following: 3. Press to select the Audi[...]

52 Fine-tuning the Projector Customizing the Highlighting Tools The highlighting tools let you add pointers and other types of annotations to your image, as described on pages 39 to 41. You can use the Effect menu to customize th ese tools and set the pointer speed for highlighting. The Reset option lets you return all the highlighting tools to the[...]

Fine-tuning the Projector 53 Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a sig nal or when you press the A/V Mute button. The image can be a company logo, slogan[...]

54 Fine-tuning the Projector 5. When you see th e message “ Do you use this image? ” select Yes and press . You see the sc reen shown at the left. 6. Use the Tracki ng and Sync buttons (control panel) or the button (remote control) to select a zoom rate (display size), and then press . 7. When the message “ Do you save the user ’ s logo? ?[...]

Fine-tuning the Projector 55 Customizing Projector Features You can use the Setting menu to disable the projector ’ s sleep mode, adjust the image shape, and customize several other features. 1. Press the Menu button. 2. Use the Sync – button (control panel) or the button (remote control) to highlight Setting . You see the options and their set[...]

56 Fine-tuning the Projector ■ Prompt Turns off the identifying text that appears briefly when you switch picture sources. (It ’ s best to leave this on.) ■ A/V Mute Selects the screen color or image to display when you press the A/V Mute button. The lo go setting displays an image that you have transferred to the projector (see page 53). ■[...]

Fine-tuning the Projector 57 Setting Advanced Features You can use the Advanced menu to configure the projector for rear projection or ceiling mounting, and adjust several other features. 1. Press the Menu button. 2. Use the Sync – button (control panel) or the button (remote control) to highlight Advanced . You see the features and their setting[...]

58 Fine-tuning the Projector ■ Ceiling Turn on when the projector is mounted upside-down from the ceiling. ■ COM Port Switches between serial ( RS- 232C ) and US B communication for programming/projector control. 5. When yo u ’ re finished, press Esc or Menu . Viewing Lamp Usage and Other Information Use the About menu to view information abo[...]

Fine-tuning the Projector 59 3. If you have changed the lamp, press to select Reset Lamp Timer. Press again, then select Yes when you see the prompt. Press to confirm the reset. 4. When yo u ’ re finished, press Esc or Menu . Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Se[...]

60 Fine-tuning the Projector 600-811-820.book Page 6 0 Tuesday, April 30, 2002 10:17 AM[...]

5 Maintaining and Transporting the Projector 61 5 Maintaining and Transporting the Projector Y our projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. You also need to periodically clean the air filter on top of the projector. A clogged[...]

62 Maintaining and Transporting the Projector Cleaning the Lens Clean the lenses whene ver you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lenses, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gent ly wipe the lens surface. Cleaning [...]

Maintaining and Transporting the Projector 63 Cleaning and Replacing the Air Filter Clean the air filter on the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the ai r filter, follow[...]

64 Maintaining and Transporting the Projector 4. If you need to replace the filter, press the arrow tab and lift up the filter to remove it. 5. To install a new filter, first insert the tabs, then press down until it clicks in place. Replacing the Lamp The projection lamp typically lasts for about 1500 hours of use. It is time to replace the lamp w[...]

Maintaining and Transporting the Projector 65 Follow these steps to replace the lamp: 1. Turn off the projector, wait for it to cool down (when the light stops flashing), then unplug the power cord. 2. Allow the projector to cool for at least half an hour (if it has been on). 3. Use a screwdriver to slide the latch and pop open the lamp cover. Then[...]

66 Maintaining and Transporting the Projector 5. Grasp the lamp as shown and pull it straight out. 6. Gently insert the new lamp. 7. Once the lamp is fully inserted, ti ghten its screws. 8. To replace the lamp cover, insert the tabs and then snap the cover into place. (The projector won ’ t come on if the lamp cover is loose.) caution Do not touc[...]

Maintaining and Transporting the Projector 67 Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector ’ s menu. 1. Press the Menu button on the control panel or the remote control. You see the main menu. 2. Use the Sync – button (control panel) or the button (remote control) to highlight About .[...]

68 Maintaining and Transporting the Projector Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, follow these packing guidelines to prevent damage to the projector: ■ When shipping the projector for repairs, use the origin al packaging material if possible. If you do not have the origina[...]

6 Solving Problems 69 6 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can ’ t solve yourself. This chapter explains the following: ■ Using the projector ’ s on-s creen help system ■ What to do when the projector ’ s status lights flash ■ Solvi[...]

70 Solving Problems Using On-Screen Help If the image doesn ’ t look right or your audio isn ’ t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Help for the image ■ Help for the sound ■ Language selection ( Language) Follow these steps t[...]

Solving Problems 71 4. Highlight a solution (if this choice is available). Then press t he button to select th e solution. Press the Esc button if you need to back up. If the solution is to adjust one of the settings, press either the Tracking – or Tracking+ button on the projector (or use the button on the remote control) to adjust it. 5. To exi[...]

72 Solving Problems Refer to the following table for a complete description of the projector ’ s status lights and their meaning: Status lights Light Status Description orange The projector is in sleep mode. You can unpl ug it or press the Power button to turn it on. flashing green The projector is warming up. Wait for the image to appear. green [...]

Solving Problems 73 The power light is flashing orange and you cannot turn on the projector. The lamp is cooling down. Wait until the light turns off and then press the Power button to turn on the projector. The power light does not come on. Make sure the power cord is connected securely both at the power outlet and the projector. If you h ave just[...]

74 Solving Problems You see a blue screen with the message No Signal displayed. ■ Make sure the cables are connected correctly, as described in Chapter 1. ■ Try restarting your computer. ■ If you ’ ve connected a computer and one or more video sources, you may need to press the Computer/YCbCr or Video button (on the projector) or the Comp1 [...]

Solving Problems 75 If you ’ re using Macintosh OS X: 1. Select System Preferences . 2. Select Dis plays . 3. Make sure the VGA Display dialog box is selected. 4. Click the Arrange tab. 5. Make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed. ■ Make sure the Comp1 Input and Comp2/ YCbCr options in the Setti[...]

76 Solving Problems ■ You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. The image isn’t square, but trapezoid-shaped. ■ If you ’ ve tilted the projector upward by extending the legs, the image will be broader at the top. Hold down[...]

Solving Problems 77 ■ Adjust the Sharpness setting on the Video menu (see page 48). When you change video settings, you should be able to see the effect on the screen immediately. If you ’ re projecting from a computer, you may also need to adjust the tracking and sync as described in the next section. If you don ’ t like the new settings, yo[...]

78 Solving Problems 3. Hold down the Shift button and press the Sync – and Sync+ buttons to increase the sharpness of the image. The colors of the image are not right. ■ If you ’ re displaying a computer image, use the Color Mode option in the projector ’ s V i d e o me n u to a d j u s t t h e c o l o r . I f y o u ’ re displaying video,[...]

Solving Problems 79 ■ Make sure the Windows volume controls on your computer are not turned all the way down or set to Mute. You may be able to check this by clicking the volume control in your Windows System Tray (lower right corner of the scree n). ■ Make sure the A/V Mute button is not enabled. ■ The wrong source may be selected. Press the[...]

80 Solving Problems Where To Get Help EPSON provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Telephone Support Services To use the EPSON PrivateLine Su pport service, call (800) 6 37-7661 and enter the PIN on the EPSON Private Line Support card included in your owner ’ s kit. This[...]

A Appendix A: Connecting to Additional Equipment 81 A Appendix A: Connecting to Additional Equipment T his appendix explains how to connect the projector to a desktop PC or Macintosh, high-end workstation, more than one computer, or a DVI video source. It also provides guidance on setting up the projector in a permanent inst allation. The following[...]

82 Appendix A: Connecting to Additional Equipment Installing the Projector The projector can be installed for four different viewing setups: front projection, ceiling mounting, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown: To project from overhead, you ’ ll need to select Ceiling in the projector ’ s Adva[...]

Appendix A: Connecting to Additional Equipment 83 Controlling the Projector from a Computer If you want to be able to control the projector ’ s settings from a computer, you can install the EMP Link program. You can download this program, plus its User ’ s Guide, from EPSON ’ s web site at support.epson.com. You ’ ll also need a serial or U[...]

84 Appendix A: Connecting to Additional Equipment Connecting to a PC Desktop Computer You can connect the projector to any IBM-compatible PC. This section includes instructions for the following: ■ Connecting the computer cable ■ Connecting the mouse cable (if you want to use the remote control as a mouse or use USB audio) ■ Connecting the au[...]

Appendix A: Connecting to Additional Equipment 85 3. Connect one end of the computer cable to the projector ’ s Computer2/Component Video port, as shown. 4. Connect the other end of the cable to the computer ’ s video port. 5. Tighten the screws on the connectors. Computer2/Component Video Port 600-811-820.book Page 8 5 Tuesday, April 30, 2002 [...]

86 Appendix A: Connecting to Additional Equipment Connecting the Mouse Cable To use the remote control as a mou se, follow the steps below. You ’ ll use a different mouse cable, de pending on whether your computer has a round PS/2 mouse port or a flat USB port. The USB cable also provides audio sup port. If your computer supports USB and your pre[...]

Appendix A: Connecting to Additional Equipment 87 Connecting the Audio Cable If your presentation includes sound and you want to use the projector ’ s built-in speakers, you ’ ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable. 1. Connect one end of the audi[...]

88 Appendix A: Connecting to Additional Equipment Connecting to a Desktop Macintosh You can connect the projector to any desktop Macintos h. This section includes instructions for the following: ■ Connecting the computer cable ■ Connecting the mouse cable (if you want to use your remote control as a mouse or use USB audio) ■ Connecting the au[...]

Appendix A: Connecting to Additional Equipment 89 3. Connect one end of the computer cable to the projector ’ s Computer 2/ Component Video port, as shown. 4. Connect the other end of the computer cable to the video port on the Macintosh. If it doesn ’ t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see pag[...]

90 Appendix A: Connecting to Additional Equipment Connecting the Mouse Cable To use the remote control as a mou se follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you ’ ll n eed a Macintosh mouse cable; see your projector de aler for help in obtain[...]

Appendix A: Connecting to Additional Equipment 91 Connecting the Audio Cable If your presentation includes sound and you want to use the projector ’ s built-in speakers, you ’ ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable. 1. Connect one end of the audi[...]

92 Appendix A: Connecting to Additional Equipment Connecting to a Second Computer To connect a second computer to the projector, you need to use the projector ’ s Computer1 port. You ’ ll need the optional DVI-analog cable, unless the computer supports DVI (Digital Visual Interface) video. 1. Connect one end of the cab le to the com puter ’ s[...]

Appendix A: Connecting to Additional Equipment 93 Connecting to a High-End Workstation There is no across-the-board standard for workstation video output. However, your PowerLite projector is capable of remap ping input resolutions up to 1600 × 1200 pixels. Workstations that follow the SXGA standard and use the HD15 (standard VGA) connector won ?[...]

94 Appendix A: Connecting to Additional Equipment 600-811-820.book Page 9 4 Tuesday, April 30, 2002 10:17 AM[...]

B Appendix B: Notices 95 B Appendix B: Notices T his chapter includes safety instructions and other important informati on about your EPSON PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use t[...]

96 Appendix B: Notices ■ Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User ’ s Guide , do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous vo[...]

Appendix B: Notices 97 Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver[...]

98 Appendix B: Notices Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; an d/or CPU Boards and Power Suppli es used with Class B Personal Computers We: EPSON AMERICA, INC. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole respon[...]

Appendix B: Notices 99 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates[...]

100 Appendix B: Notices Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered : Epson America, Inc. ( “ EPSON ” ) warrants to the first end user customer of the EPSON product enclosed with this limited warranty statement that the product, if purchased and used in the United States or Cana[...]

Appendix B: Notices 101 FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS [...]

102 Appendix B: Notices 600-811-820.book Page 1 02 Tuesday, April 30, 200 2 10:17 AM[...]

C Appendix C: Technical Specifications 103 C Appendix C: Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 0.9 inches (22.9 mm) Lens F=1.74 to 2.06, f=2 8.3 mm to 37.98 mm Resolution (native format) 811p and 820p: 102 4 × 768 pixels (XGA) 600p: 800 × 600 pixels (SVGA) Color reproduction 2[...]

104 Appendix C: Technical Specifications Projection Lamp Type UHE (Ultra High Efficien cy) Power consumption 200 W Lamp life About 1500 hours Part number V13H010L15 Remote Control Range 32.8 feet (10 meters) Batteries Alkaline AA (2) Mouse Compatibility Supports PS/2 and USB Dimensions Height 4.1 inches (104 mm) Width 13.7 inches (348 mm) Depth 10.[...]

Appendix C: Technical Specifications 105 Environmental Temperature Operating: 41 to 95 ° F (5 to 35 ° C) Storage: 14 to 140 ° F (-10 to 60 ° C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90 % RH, non-condensing Safety United States FCC Part 15J Class B UL1950 Rev. 3 Canada DOC SOR/88-475 CSA C22.2 No. 950 Re v. 3 (cUL) CE M[...]

106 Appendix C: Technical Specifications Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a computer, the computer ’ s video card must be set at a refresh rate (vertical frequency) that ’ s compatible with the pr[...]

Appendix C: Technical Specifications 107 1 The image is resized so that it displays using one of the projector ’ s native formats (PowerLite 600p only). 2 The image is resized so that it displays using one of the projector ’ s native formats. 3 Not supported on the PowerLite 600p SXGA3 — 75 75 1280 × 1024 2 supporte d SXGA3 — 85 85 1280 ×[...]

108 Appendix C: Technical Specifications ESC/VP21 Commands When the projector is in a command ready state, it returns the : code. When command processing is complete, the projector also returns a : code. If command processing terminates with an error, an error message is output and then the : code is sent. Item Command Power ON/OFF ON PWR ON OFF PW[...]

Index 109 Index A A/V Mute, 30, 54, 56 A/V Mute button, 29, 36 About menu, 44, 58 to 59, 67 Accessories, 6 to 7, 80 Advanced menu, 44, 57 to 58 Air filter, cleaning and replacing, 63 to 64 Anti-theft device, 7, 11 Arrow button, remote control, 4 2 Aspect ratio, 28, 103 Audio adjusting tone, 51 adjusting volume, 29, 36 , 51 connecting desktop, 87, 9[...]

110 Index Connector pin assignments, 105 Contrast setting, 48 Cursor/Stamp tool, 39, 52 D Declaration of Conf ormity, 98 Default settings, restoring, 46, 59 Desktop adapter, Macintosh, 88 to 89 Desktop computer, connecting, 84 to 87, 88 to 91 Digital visual interface, see DVI Distance from projector to sc reen, 10, 103 Down arrow button, remote con[...]

Index 111 M Macintosh connecting, 88 to 91 desktop adapter, 88 to 89 Manuals, 3 to 4 Menus About, 44, 58 to 59, 67 Advanced, 44, 57 to 58 Audio, 44, 51 changing settings, 44 to 46 Effect, 44, 52 Reset All, 44, 59 Setting , 44, 55 to 56 User ’ s Logo, 44, 53 to 54 using, 44 to 46 Video, 44, 47 to 49 Mouse buttons, 41 N New Hardware Wizard, 21 No-S[...]

112 Index Resizing image, 28, 37 Resolution, 1, 49, 103 S Safety instructions, 95 to 96 specif ication s, 105 Screen blank, 22 to 24 distance from projector, 10 Screen image See Image Setting menu, 44, 55 to 56 Shift button, 77 Sleep mode, 30, 56 Sound adjusting, 51 turning off (using A/V Mute), 30 see also Audio Source, selecting, 29, 35 Speaker, [...]

Index 113 Volume adjusting, 29, 36, 51 button, 29 , 36 setting, 51 W Warning lights, 71 to 73 Warranty, 4 Workstations, connecting projector to, 93 Z Zoom ratio, 103 Zooming image, 25, 37 600-811-820.book Page 1 13 Tuesday, April 30, 200 2 10:17 AM[...]