Epson 720c manuel d'utilisation

EPSON ® PowerLite ® 720c/730c Multimedia Projector User’ s Guide 720-730.book Page i Thursday, Oct ober 30, 2003 11:32 AM[...]

ii Important Safety Information WARNING : Never look into th e projector lens when the la mp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical volta ges inside the projector can severe ly injure you.[...]

iii Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Getting the Most from Your Projector . . . . . . . . . . . . . . . . . 2 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting More Information . . . . . . . . . . . . . . . . . . . . . . 3 Registration and Warranty . . . . [...]

iv Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Focusing and Zooming Your Image . . . . . . . . . . . . . . . 25 Adjusting the Height of Your Image . . . . . . . . . . . . . . . 26 Adjusting the Image Shape . . . . . . . . . . . . . . . . . . . . . . 27 Shutting Down the Projector . . . . . . . . . . . . . . . [...]

v 5 Maintaining and Transporting the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Cleaning the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Cleaning the Projector Case . . . . . . . . . . . . . . . . . . . . . . . . 52 Cleaning and Replacing the Air Filter . . . . . . . . . . . . . . . . . [...]

vi B Appendix B: Notices . . . . . . . . . . . . . . . . . . . . . . . . . 83 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 83 Remote Control Information . . . . . . . . . . . . . . . . . . . . . . . 85 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . 86 FCC Compliance Statement . . . . . . .[...]

Welcome 1 - Welcome T he EPSON ® PowerLite ® 720c and 730c are micro-portable projectors that offer up to 2000 ANSI lumens of brightness. From boardrooms to auditoriums, your fu ll-color presentations and videos will be bright and visible even in ordinary indoor lighting. Images are displayed at a resolution of 1024 × 768 pixels. Three 0.9-inch [...]

2 Welcome Getting the Most from Your Projector Depending on your presentation, you can take advantage of any or all of these options: ■ Connecting to a laptop or other comput er If you want to connect to a PC laptop or Macintosh PowerBook or iBook, see the Quick Setup sheet or see page 12 of this guide. To connect to a desktop computer or worksta[...]

Welcome 3 Using Your Documentation To connect the projector to your laptop and get your presentati on running fast, see the Quick Setup sheet that came in your owner’s kit or see page 12 of this guide. This book contains all the information you need to set up and use your projector. Please follow these guidelines as you re ad through it: ■ Warn[...]

4 Welcome If you still need help after checking this User’s Guide and t he sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637- 7661 and enter the PIN on the card in your owner’s kit. See page 70 for more information. Registration and Warranty Your projector comes with a basic carry-in warran[...]

Welcome 5 Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Save all packaging in case you need to ship the projector. Always use the original packaging (or equivale nt) when you need to send the projector to another location. If you are moving the projector by hand, use the carrying case included [...]

6 Welcome Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) ■ To receive a component video signal from a VCR or other video device, you need a D-sub 15-pin to component video cable [...]

Welcome 7 Optional Accessories To enhance your use of the projector, EP SON provides the following optional accessories: You can purchase these acce ssorie s from your dealer, by calling EPSON at (800) 87 3-7766, or by visiting the EPSON Store SM at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral. Pro[...]

8 Welcome 720-730.book Page 8 Thursday, October 30, 2003 11:32 AM[...]

Setting Up the Projector 9 1 Setting Up the Projector T his chapter tells you how to set up the projector and connect it to a laptop computer or video source. If you need to connect the projector to a desktop or workstation computer, see Appendix A. You’ll find instructions for the following in this chapter: ■ Positioning the projector ■ Conn[...]

10 Setting Up the Projector Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. ■ Place the projector on a sturdy, level surface, betwee n 3.2 and 38.5 feet from the screen. ■ Make sure there i s plenty of space for [...]

Setting Up the Projector 11 If you place the projector below the le vel of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its rectangular shape, but the Aut o Keystone feature corrects the distortion aut omatically. If the image does not regain its rectangular shape, the[...]

12 Setting Up the Projector Connecting to a Laptop Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port , including PC notebook and laptop computers, Macintosh PowerBooks and iBooks, and hand-held devices. Connecting the Computer Cable Before you start, make sure your computer and the proj[...]

Setting Up the Projector 13 Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you click through slideshow-style presentations, such as PowerPoint, from up to 20 feet away (for details, see page 34). Th is gives you more flexibility in delivering your presentation, since you won’t need to stand near yo[...]

14 Setting Up the Projector Amplifying Computer Audio Your laptop probably has its own sound system; however, it may not be adequate for your presentation. If you need mor e volume, you can connect a computer audio cable to take advantage of the projector’s built-in amplifier and speaker. You can obtain a computer audio cable (3.5-mm stereo minip[...]

Setting Up the Projector 15 Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, gaming consoles, such as Microsoft Xbox, Sony PlayStation 2, and Nintendo GameCube, digital camera, or any other compatible video source to your projector. The projector supports HDTV, NTSC, PAL, and SECAM, and automatically dete[...]

16 Setting Up the Projector Connecting the RCA Video Cable Before starting , make sure the pr ojector and your DVD player or other video source are turned off. 1. Connect one end of the yellow RCA plug to the projector’s Video jack. 2. Connect the other end of the plug to the video-out jack on your video source. 720-730.book Page 16 Thursday , Oc[...]

Setting Up the Projector 17 Connecting an S-Video Cable If your video source has an S-Video jack, you can use it to project a higher quality video image. Howeve r, you’ll need an S-Video cable, which may be included with your video source, or may be purchased. Before starting, make sure the pr ojector and your DVD player or other video source are[...]

18 Setting Up the Projector Connecting a Component Video Cable If your video source has compon ent video connectors, you can use them to project a higher quality vi deo image. However, you’ll need a component video cable, which can be purchased from EPSON (ELPKC19). Before starting , make sure the pr ojector and your DVD player or other video dev[...]

Using the Projector 19 2 Using the Projector O nce you’ve set up the projector, you’re ready to turn it on, adjust the image, and give your presentation. Although you can operate the projec tor without it, the remote control lets you use additional features. See Chapter 3 for instru ctions on using the remote. Th is chapter covers th e followin[...]

20 Using the Projector Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you’ve connected to it. You can turn on your computer and video equipment in any order, but if you hav[...]

Using the Projector 21 4. Press the red Power button on top of the projector or on the remote control. The power light flashes green as the projector warms up, and the projection lamp comes on in ab out 30 seconds. The power light stays green. 5. Do one of the following: ■ If you’re using a computer, turn it on or restart it. In a few moments, [...]

22 Using the Projector What To Do If You See a Blank Screen If you see a blank screen or a blue screen with the message No Signal after turning on your computer or video source, try the following: ■ Make sure the cables are connected correctly, as described on page 12 (for laptops) or in Appendix A (for other systems). ■ Make sure the power lig[...]

Using the Projector 23 If you’re using a Macint osh laptop with OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control P anels , then cl ick Monitors or Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the [...]

24 Using the Projector If you’re using a Macint osh laptop with OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select System Preferences , then click Displays. 2. Select the VGA Display di alog box , click the Arrange tab, and make sure Mirror Disp[...]

Using the Projector 25 Adjusting the Image Once you see your image, you’ll need to make certain adjustments: ■ To focus or zoom your image, see below. ■ If the image is too high or too low, you can reposition it. See page 26. ■ If the image isn’t square, se e page 27. Focusing and Zooming Your Image Rotate the focus ring to sharpen the im[...]

26 Using the Projector Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s feet. 1. Stand behind the proje ctor. Press the blue foot release levers an d lift the front of the projector. This unlocks the feet. 2. Once the image is positioned where you want it, release the levers to lock the fee[...]

Using the Projector 27 Adjusting the Image Shape If the projected image isn’t rectangular or has a “keystone” shape, do one or more of the following: ■ If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the sc reen, facing the screen squarely. ?[...]

28 Using the Projector Shutting Down the Projector When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating. 1. If you’re using a computer, shut it down first. 2. To turn off the projector, press the Power button on the proj[...]

Using the Projector 29 5. Replace the lens cap and unplug the power cord. 6. If you’re using a VCR or other video source, turn it off after you turn off the projector. 7. Disconnect all equipment, and store the projector in the soft case that came with it or in a protective case. 720-730.book Page 29 Thursday , October 30, 2003 11:32 A M[...]

30 Using the Projector 720-730.book Page 30 Thursday , October 30, 2003 11:32 A M[...]

Using the Remote Control 31 3 Using the Remote Control T he remote control lets you access your projector’s features from anywhere in the room—up to 20 feet away. You can use it to turn the projector on and off, zoom in on a portion of your image, and control various other features of the projector. If you’re using a computer and you’ve con[...]

32 Using the Remote Control Using the Remote Control Before using the remote control, pu ll out the tape from the battery tray as shown below. When using the remote control, stand within 20 feet of the projector. Point the remote control either at the front or bac k of the projector or at the screen (the projector’s front sensor can detect signal[...]

Using the Remote Control 33 Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound and darken your screen. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen. ■ To turn off the picture and sound, press the A/V M[...]

34 Using the Remote Control Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mou se, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 20 feet away . This gives you more flexibility, since you won’t need to stand near your computer to change slide[...]

Using the Remote Control 35 Replacing the Battery Follow these steps to replace the battery: 1. Press the tab towards the center of the remote and slide the battery tray out of the remote control. 2. Remove the old battery and insert a CR2025 watch battery as shown. 3. Slide the battery tray back into th e remote. caution When replacing batteries, [...]

36 Using the Remote Control 720-730.book Page 36 Thursday , October 30, 2003 11:32 A M[...]

Fine-tuning the Projector 37 4 Fine-tuning the Projector Y ou can use the projector’s remote control to access on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, and find out how long your lamp has been in use. This chapter covers the following information: ■ Using the menu system ■ Ad[...]

38 Fine-tuning the Projector Using the Projector’s Menu System The seven projector menus let you adjust and customize the projector features from the remote control: ■ The Video menu controls the look and quality of the projected image. It lets you adjust the im age position and fine-tune settings such as Brightness, Sharpness, and Contrast. ?[...]

Fine-tuning the Projector 39 Changing Menu Settings Use the buttons on the remote control to access the menus and change settings. Follow these s teps: 1. To display the menu screen, press the Menu button on the remote control. You see the menu screen: The seven menus are listed on the left, and the options av ailable for the highlighted menu are s[...]

40 Fine-tuning the Projector Adjusting the Image The Video menu lets you make adju stments to the projected image. The options available in the menu depend on which image source is selected: computer or video. Repositioning the Image Follow these steps to fine-tune the image posit ion: 1. Press the Menu button. You see the main menu. 2. Press Enter[...]

Fine-tuning the Projector 41 ■ Color (video only) Adjusts the depth or in tensity of the image. ■ Tint (video only) Adjusts the balance of green to magenta in the image. ■ Video Signal (video only) Leave this setting at Auto unless you are using a 60-Hz PAL system (select PAL60 ). ■ Aspect Ratio (video only) Set to 4:3 for letterbox video c[...]

42 Fine-tuning the Projector ■ Input Signal Leave this setting on RGB when a computer is connected to the Computer/Component Video port. When a component video source is connected, choose YCb Cr or YPbPr , depending on the type of signals produced by your source. (You can tell which setting is correct by the quality of the projected image.) 4. Wh[...]

Fine-tuning the Projector 43 Creating Your Own Startup Screen You can transfer any image on your computer to the projector, and then use it as the scre en displayed when the projector is not receiving a signal. You can also set it to be displayed when you press the A/V Mute button, or as a startup screen. The image can be a company logo, slogan, ph[...]

44 Fine-tuning the Projector 6. When you see the mes sage “Do you use this image?” select YES and press Enter . If you want to change the area selected, select NO , press Enter and repeat steps 4 through 6. 7. Use the directional buttons on the remote control to select a zoom rate (display size), and then press Ent er . 8. When you see the mes [...]

Fine-tuning the Projector 45 Customizing Projector Features You can use the Setting menu to disable the projector’s sleep mode, adjust the image shape, and cu stomize several other features. 1. Press the Menu button. 2. Use the directional buttons to highlight Setting . You see the features and their settings on the right side: 3. Press Enter to [...]

46 Fine-tuning the Projector ■ Prompt Turns off the identifying text that appears briefly when you switch from computer input to a video source. ■ Color Mode Prompt Turns off the identifying text that appears briefly when you switch color modes. ■ A/V Mute Selects the screen color or image to display when you press the A/V Mute button. The lo[...]

Fine-tuning the Projector 47 3. Press Enter to select the Advanc ed menu. 4. Use the directional buttons and Enter button to set the following options: ■ Language Select from nine languages to be used for the projector menus. ■ Startup Screen Turn on to display the image or logo you have captured whenever the projector starts. See page 43 for m[...]

48 Fine-tuning the Projector Viewing Lamp Usage and Other Information Use the About menu to view information about the display settings of your computer and the number of hours the lamp has b een used. 1. Press the Menu button. You see the main menu. 2. Use the En ter button to select About . You see the lamp usage hours and computer disp lay setti[...]

Fine-tuning the Projector 49 Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Select Reset All and press the Enter button on the remote control to display the confirmation screen. Select YES to reset all the defaul t settings or NO to cancel. Execute : Select : Execute Video Aud[...]

50 Fine-tuning the Projector 720-730.book Page 50 Thursday , October 30, 2003 11:32 A M[...]

Maintaining and Transp orting the Projector 51 5 Maintaining and Transporting the Projector Y our projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. You also need to periodically clean the air filter on the side of the projector. A clo[...]

52 Maintaining and Transp orting the Projector Cleaning the Lens Clean the lens whene ver you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smea rs on the lens, use le ns-cleaning paper . If necessary, moisten a soft cloth with lens cleaner and gent ly wipe the lens surface. Cleaning [...]

Maintaining and Transp orting the Projector 53 Cleaning and Replacing the Air Filter Clean the air filter on the side of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filte r, follow [...]

54 Maintaining and Transp orting the Projector Replacing the Lamp The projection lamp typically lasts fo r about 1500 hours of use. It is time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The warning light is red, flashing red, or flashing orange. ■ The message LAMP REPLACE appears on the screen when[...]

Maintaining and Transp orting the Projector 55 5. Use a screwdriver to loosen the two screws holding the l amp in place. (You can’t remove the screws.) 6. Hold the lamp by the top, as shown, and pull the lamp straight out. 7. Gently insert the new lamp. 8. Once the lamp is fully inserted, tight en its screws. 9. Replace the lamp cover. caution Do[...]

56 Maintaining and Transp orting the Projector Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the LAMP REPLACE warning message. Follow the directions below to reset the lamp timer: 1. Press the Menu button. You see the main menu. 2. Use the directional buttons to highlight About . You see the following: 3. [...]

Maintaining and Transp orting the Projector 57 Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, please follow these packing guidel ines to prevent damage to the projector: ■ When shipping the projector for repairs, use the original packaging material if possible. If you do not have the[...]

58 Maintaining and Transp orting the Projector 720-730.book Page 58 Thursday , October 30, 2003 11:32 A M[...]

Solving Problems 59 6 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: ■ Using the projector’s on-screen help system ■ What to do when the projec tor’s status lights flash ■ Solving probl[...]

60 Solving Problems Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the green ? Help button on top of the projector. The following choices are available: ■ Help for the image ■ Help for the sound ■ Language selection Follow these steps to get he lp: 1. Press the green ? Help b[...]

Solving Problems 61 What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the projector is not working correct ly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the statu[...]

62 Solving Problems Flashing orange Flashing orange (quickly) High temperature warning The projector is to o hot. Make sure the temperature surrounding the projector does not exceed 95 ° F and there is plenty of space around and under the projector for ventilation . Clean the air filter, if necessary. See page 53 for instructions. Green Flashing o[...]

Solving Problems 63 Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the power light is gree n, not flashing, and the lens cap is off. ■ The projector may be in sleep mode. If the power light is orange, press the P Power button to turn the projector on. ■ If the power was switched off and then on again, th[...]

64 Solving Problems If you’re using a PC laptop: ■ Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD . Allow a few seconds for the projector to sync up after pr essing it. Check your laptop’s manual or online help for details. On most syste[...]

Solving Problems 65 The message Not Supported is displayed. Make sure your computer’s resolution doesn’t exceed UXGA and the frequency is supported by the projec tor (see page 93). If necessary, change your computer’s resoluti on setting as described below. Only part of the comput er image is displayed. ■ Make sure the image Position settin[...]

66 Solving Problems The image isn’t rectangula r, but trapezoid-shaped. ■ Make sure the projector isn’t placed off to one side of the screen, at an angle, or the image won’t be rectangular. Place the projector directly in front of the center of the screen, facing the screen squarely. ■ If you’ve tilted the projector upward by extending [...]

Solving Problems 67 The image is blurry. ■ Adjust the focus using the focus ring. ■ There may be dirt or smears on the lens. Clean the lens as described on page 52. ■ Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment. ■ Adjust the Sharpness setting on th[...]

68 Solving Problems The colors of the image are not right. ■ If you’re displaying a computer image, use the Color Mode option in the projector’s Video menu to adjust the color. If you’re displaying video, adjust the Color , Tint , and Gamma settings on the Video menu. ■ Try adjusting the Color Temp setting on the Advanced menu. ■ Check [...]

Solving Problems 69 Solving Problems with the Remote Control The projector doesn’t respond to remote control commands. ■ Make sure the tape has been re moved from the battery tray as described on page 32. ■ Make sure you are with in 20 feet of the projector, an d within range of the projector’s front or back sensor (approximately 30° to th[...]

70 Solving Problems Where To Get Help EPSON provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Telephone Support Services To use the EPSON PrivateLine Su pport service, call (800) 6 37-7661 and enter the PIN on the EPSON Private Line Support card included in your owner’s kit. This i[...]

Solving Problems 71 Before you call, please have the following information ready: ■ Product name (EPS ON PowerLite 720c or EPSON PowerLite 730c) ■ Product serial number (located on the bottom of the projector) ■ Computer or video configuration ■ Description of the problem You can purchase screens, carrying cases, or other accessories from E[...]

72 Solving Problems 720-730.book Page 72 Thursday , October 30, 2003 11:32 A M[...]

Appendix A: Connecting to Additional Equipment 73 A Appendix A: Connecting to Additional Equipment T his appendix explains how to connect the projector to a desktop computer or Macintosh, or a high-end workstation. The following information is covered: ■ Installing the projector ■ Connecting to a PC desktop computer ■ Connecting to a desktop [...]

74 Appendix A: Connecting to Additional Equipment Installing the Projector The projector can be installed for three different viewing set ups: front projection, ceiling mounting, or rear projection onto a semi-transparent screen. To project from overhead, you’ll need to select Ceiling in the projector’s Advanced menu. To project from the rear, [...]

Appendix A: Connecting to Additional Equipment 75 Connecting the Computer Cable 1. Disconnect the monitor cable from the video port on the back of the computer. 2. Connect one end of the computer cable to the projector’s Computer/Component Vide o port. 3. Connect the other end of the computer cable to the computer’s video port. 4. Tighten the s[...]

76 Appendix A: Connecting to Additional Equipment Connecting the Mouse Cable To use the remote control as a mou se, follow the steps below. 1. Connect the square end of the USB mouse cable to the projector’s USB port, as shown. 2. Disconnect your mouse from the port on the back of your computer and replace it with the other end of the cable . (Yo[...]

Appendix A: Connecting to Additional Equipment 77 Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you can use a computer audio cable. The required cable (3.5-mm stereo miniplug cable) is available from computer or electronics dealers. 1. Connect one end of the audio cab le to t[...]

78 Appendix A: Connecting to Additional Equipment Connecting to a Desktop Macintosh You can connect the projector to a desktop Macintosh. This section includes instructions for the following: ■ Connecting the computer video cab le ■ Connecting the mouse cable (if you want to use your remote control as a mouse) ■ Connecting an optional audio c[...]

Appendix A: Connecting to Additional Equipment 79 Connecting the Computer Cable Follow these steps to connect the computer cable. You may not need to use the adapter as shown. 1. Disconnect the monitor cable from the video port on the back of the Macintosh. 2. Connect one end of the computer cable to the projector’s Computer/Component Vide o port[...]

80 Appendix A: Connecting to Additional Equipment Connecting the Mouse Cable To use the remote control as a mou se, follow the steps below. If the Macintosh has a built in USB port, y ou can use the USB mouse cable that came with the projector. 1. Connect one end of the mouse cable to the projector’s USB port. 2. Disconnect your Macintosh’s mou[...]

Appendix A: Connecting to Additional Equipment 81 Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you can use a computer audio cable. The required cable (3.5-mm stereo miniplug cable) is available from computer or electronics dealers. 1. Connect one end of the audio cab le to t[...]

82 Appendix A: Connecting to Additional Equipment 720-730.book Page 82 Thursday , October 30, 2003 11:32 A M[...]

Appendix B: Notices 83 B Appendix B: Notices T his appendix includes safety instru ctions and other important info rmation about your EPSON P owerLite 720c/730c. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use [...]

84 Appendix B: Notices ■ Never push objects of any kind through cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User’s Guide , do not attempt to service this product yourself. Refer all servicing to qualified s ervice personnel. Opening or removing covers may expose you to dangerous[...]

Appendix B: Notices 85 Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions : ■ There is an object between the remo te control IR emitter and the IR receiv[...]

86 Appendix B: Notices Declaration of Conformity According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripheral s; and/or CPU Boards and Power Suppli es used with Class B Personal Computers: We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel: (562) 290-5254 Declare under sole responsibility th[...]

Appendix B: Notices 87 FCC Compliance Statement For United States Users This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation. This equipment generat[...]

88 Appendix B: Notices Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered : Epson America , Inc. (“EPSO N”) warrants to the first end user customer of the EP SON product enclosed with this limited warranty statement that the product, if purchased and used in the Uni ted States or Canad[...]

Appendix B: Notices 89 FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PE RIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS [...]

90 Appendix B: Notices 720-730.book Page 90 Thursday , October 30, 2003 11:32 A M[...]

Appendix C: Technical Specifications 91 C Appendix C: Technical Specifications General Type of display 720c: Poly-silicon TFT active matrix 730c: Poly-silicon TFT active matrix with MLA (Micro Lens Array) Size of LCD panels Diagonal: 0.9 inches (22.9 mm) Lens F=1.9 to 2.1, f=31 to 3 6 mm Resolution 1024 × 768 pixels (native format) Color reproduct[...]

92 Appendix C: Technical Specifications Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 150 W Lamp life About 1500 hours Part number V13H010 L18 Remote Control Range 20 feet (6 meters) Battery CR2025 lithium Mouse Compatibility Supports USB Dimensions Height 2.8 to 3.1 inches (70 to 78.5 mm) Width 10.9 inches (276 mm) Depth 7.5 i[...]

Appendix C: Technical Specifications 93 Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States FCC 47CFR Part15B Class B (DoC) UL1950 Rev. 3 Canada ICES-003 Class B CSA C22.2 No. 950-95 (cUL) [...]

94 Appendix C: Technical Specifications * The image is resized using EPSON’s SizeWise Technology. SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600 * 800 × 600 * 800 × 600 * 800 × 600 * 800 × 600 * XGA—43i XGA—60 XGA—70 XGA—75 XGA—85 43 60 70 75 85 1024 × 768 1024 × 768 1024 × 768 1024 × 768 1024 × 768[...]

Appendix C: Technical Specifications 95 Computer Video Port Pin Assignments The Computer port is a female video RGB, 15-pin micro-D-style connector. Here are its pin assignments: Pin no. C omputer port 1 Red video 2 Green video 3 Blue video 4G N D 5G N D 6 Red GND 7 Green GND 8 Blue GND 9 Reserved 10 Synchronous GND 11 GND 12 SDA 13 Horizontal sync[...]

96 Appendix C: Technical Specifications 720-730.book Page 96 Thursday , October 30, 2003 11:32 A M[...]

Index 97 Index A A/V Mute button, 33, 44, 46 A/V Mute setting, 46 About menu, 38, 48 Accessories, 7, 71 Adapters, Macintosh, 7, 79 Advanced menu, 38, 46 to 47 Air filter, cleaning and replacing, 53 Anti-theft device, 7, 11 Aspect ratio, 91 Audio adjusting tone, 42 adjusting volume, 42 connecting desktop, 77, 81 connecting laptop, 14 menu, 38, 42 pr[...]

98 Index EPSON accessories, 7, 71 PrivateLine Support, 4, 70 to 71 technical support, 3 to 4, 70 to 7 1 Esc button, 34 E-Zoom buttons, 33 F FCC compliance statement, 87 Filter, see Air filter Focusing, 25 Foot release levers, 26 Freeze button, 33 H Height of image, adjusting, 26 Help, 3 to 4, 70 to 71 Help button, 60 Help system, using, 60 I iBook,[...]

Index 99 P Picture, see Image Pin assignments, connector, 95 Positioning image, 26, 40 Positioning the projector, 10 to 11, 74 Power button, 21 consumptio n, 92 saving, 28, 46 status light, 61 to 62 supply, 92 PowerBook, connecting to, 12 to 14 Presenters Online, 3, 70 PrivateLine Support, 4, 70 to 71 Problems color, 68 image, 63 to 68 remote contr[...]

100 Index Specifications brightness, 1, 91 electrical, 92 environmental, 93 general, 91 lamp, 92 lens, 91 remote control, 92 resolution, 1, 91 safety, 93 Startup Screen setting, 47 Startup screen, creating, 43 to 44 Status lights, 61 to 62 Stopping action, 33 Support, see Technical support S-Video cable, 6, 15, 17 S-Video/Video button, 32 Sync, adj[...]