Epson 7900p manuel d'utilisation

Epson ® PowerLite ® 7900p Multimedia Projector User’ s Guide[...]

2 Important Safety Information WARNING : Never look into th e projector lens when the la mp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical volta ges inside the projector can severe ly injure you. [...]

3 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Getting the Most from Your Projector . . . . . . . . . . . . . . . . . 10 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 11 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 11 Registration and Warranty .[...]

4 Contents 2 Projecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Turning On Your Equipment . . . . . . . . . . . . . . . . . . . . . . . 36 Turning On the Projector . . . . . . . . . . . . . . . . . . . . . . . 36 Selecting the Image Source. . . . . . . . . . . . . . . . . . . . . . . 38 What To Do If You See a Bla[...]

Contents 5 4 Fine-tuning the Projector . . . . . . . . . . . . . . . . . . . . 65 Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . . 67 Adjusting the Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . 68 Adjusting Images from Video Sour[...]

6 Contents Using EMP NetworkManager . . . . . . . . . . . . . . . . . . . . . . . 96 Selecting the Projectors to Monitor . . . . . . . . . . . . . . . . 96 Setting a Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Creating the E-Mail Settings . . . . . . . . . . . . . . . . . . . . . 97 Understanding the Notification Messages [...]

Contents 7 C Appendix C: Notices . . . . . . . . . . . . . . . . . . . . . . . . 131 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 131 Remote Control Information . . . . . . . . . . . . . . . . . . . . . . . 133 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . 134 FCC Compliance Statement . .[...]

8 Contents[...]

9 - Welcome T he Epson ® PowerLite ® 7900p is a versatile, lightweight projector designed to ensure that your presentations are easy and trouble-fr ee, whether you use it in the classroom or conference room. When space is limited, you can project against a surface less than five and one-half feet away. The projector’s keystone correction functi[...]

10 Welcome To prevent unauthorized use of your PowerLite 79 00p, you can assign a password, create a user logo which is displayed at startup to identify the projector, and disable the projector’s buttons through the Operation Lock feature. For more i nformation about security features, see page 77. Getting the Most from Your Projector Depending o[...]

Welcome 11 Using Your Documentation Your documentation includes a Quick Setup sheet, warranty brochures, and Epson PrivateLine ® Support card. The Quick Setup sheet gives instructions for setting up your projector and connecting it to a notebook or PowerBook ® computer. This book contains all the information you need to set up and use your projec[...]

12 Welcome Registration and Warranty Your projector comes with a basic carry-in warranty as well as an international warranty that let you project with confidence anywhere in the world. For details, see page 136 and the warranty br ochure included with your projector. In addition, for customers who register their projector, Epson offers free Extra [...]

Welcome 13 Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you ne ed to send the projector to another location. If you are moving the projector by hand, use a carrying case (eithe[...]

14 Welcome Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you’ ll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 15. ■ To receive a component video signal from a VCR or other video devi[...]

Welcome 15 Optional Accessories To enhance your use of the projector, Ep son provides the following optional accessories: You can purchase these accessor ies fr om an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (8 00-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sal[...]

16 Welcome[...]

17 1 Setting Up the Projector T his chapter gives you basic information on setting up the projector: where to position it and how to connect it to a video source (such as a VCR or DVD player) or to a no tebook or desktop c omputer. Follow the instructions in this chapter on: ■ Positioning the projector ■ Connecting to video equipment ■ Connec[...]

18 Setting Up the Projector Positioning the Projector If you’re setting up the projector yourself and it isn’t already installed in the theater or conference room you’re using, you’ll probably want to place it on a table in fron t of the screen, as shown. x art below This lets you stand in the front of the room, face the audience, and remai[...]

Setting Up the Projector 19 Ideally, you should place the projector dire ctly in front of the center of the screen, f acing it toward the scre en squarely. The base of the lens should be at about the level of the bottom of the screen. If you place the projector below screen level, you’ll have to tilt it up by extending its feet. This causes the i[...]

20 Setting Up the Projector Connecting to Video Equipment You can connect up to four video sourc es to the projector at the same time. Before starting, look at your video equipment to determine its available video-output connections: ■ If your video player has a yellow RCA-style video output connector, see “Connecting a Composite Video Source?[...]

Setting Up the Projector 21 Connecting a Composite Video Source 1. Locate an RCA-style video cable (one may be included with your video equipment). 2. Connect the cable to the ye llow video output connector on your player and the yellow Video connector on the projec tor: 3. If you want to play sound through the projector, see page 33 for instructio[...]

22 Setting Up the Projector Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment, or you can purchase one from Epson; see page 15). 2. Connect the cable betwee n the S- Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, [...]

Setting Up the Projector 23 Connecting a Component Video Source 1. Locate a component video cable (one may be included with your video equipment). Look at the connectors at one end of the cable. If they are bayonet-style (BNC) connectors, continue on to the next step. If they are RCA-style connectors, you’ll need to attach commercially available [...]

24 Setting Up the Projector Connecting an RGB Video Source Follow these instructions to connect the projector to a video player that has an RGB video output po rt. Depending on the type of connector on your player, you’ll ne ed to use the appropriate cable: ■ If your player has a VGA-style connector, see below. ■ If your player has three conn[...]

Setting Up the Projector 25 Connecting Using a BNC-style Cable 1. Locate a BNC-style video cable (one may be included with your video equipment). 2. Connect the cab le between your playe r and the corresponding R/G/B connectors on the projector. 3. If you want to play sound through the projector, see page 33 for instructions on connecting an audio [...]

26 Setting Up the Projector Connecting to a Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including d esktop models, PC notebooks, Macintosh PowerB ooks and iBooks, and hand-held devices. You can connect up to three computers at the same time: ■ To connect to the Computer port (s[...]

Setting Up the Projector 27 Connecting to the Computer Port Follow these instruction s: 1. )Locate the VGA computer cable provided with the projector. 2. Connect one end to the proje ctor’s Computer port, and the other end to your computer’s monitor port. 3. Optionally, you can connect an external monitor (see page 32), play sound through the p[...]

28 Setting Up the Projector Connecting to the BNC Connectors 1. Obtain a commercially avai lable standard BNC to VGA component video cable. 2. Plug the BNC c onnectors into the projector’s B/Cb/Pb , G/Y , and R/Cr/Pr connectors as shown below. Depending on your computer’s video card, you may have to connect to the projector’s V Sync and H/C S[...]

Setting Up the Projector 29 Connecting to the DVI Port 1. Obtain a commercially available DVI digital video cable (either DVI to DVI or DVI to DFP; see page 15 for details about ordering a cable from Epson). 2. Connect the cable to the proje ctor’s DVI port as shown. 3. Connect the other end to your computer’s DVI port. 4. Optionally, you can c[...]

30 Setting Up the Projector Using the Macintos h Desktop Adapter If you have an older desktop Macintosh or PowerBook, the VGA cable may not fit when you try to connect it. If so, you’ll need to u se the Macintosh desktop adapter to connect the VGA cable to your computer. This is available from Epson (see page 15). 1. To use the adapter, remove it[...]

Setting Up the Projector 31 Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter, you can use the projector’s remote contro l as a wireless mouse. This lets you control your computer and click through slideshow-style presentations, such as PowerPoi nt, from up to 30 feet away. The wireless mo[...]

32 Setting Up the Projector Connecting an External Monitor If you want to monitor y our presentation close-up (on a monitor placed beside the projector) as we ll as on the screen, you can connect an external monitor. You can use it to check on your presentation or switch between picture sources, even if you’ve pressed the A/V Mute button to turn [...]

Setting Up the Projector 33 Playing Sound Through the Projector You can play sound through the projector’s sp eaker system, or you can attach an external speaker system. (Attaching speakers to the projector instead of directly to the audio so urce lets you use the projector’s remote control to adjust the sound.) Connecting Audio Equipment to th[...]

34 Setting Up the Projector Connecting External Speakers To connect speakers to the projector, follow these steps: 1. Obtain the appropriate cable to connect your speakers. Depending on your stereo system, you may be able to use a commercially available audio ca ble with a stereo mini-jack connector on one end, and pin jacks on the other end. For s[...]

35 1 Projecting O nce you’ve set up the projector, you’re ready to turn it on, adjust the image, and give your presentation. Although you can operate the projec tor without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote. Follow the guidelines in this chapter f or: ■ Turning the proj[...]

36 Projecting Turning On Your Equipment Make sure your projector and other equipment are set up as described in Chapter 1. Then follow the instructions below to start the projector and display an image. If you turn on any connected computer or video equipment before starting the projector, this lets the projector automatically det ect and display t[...]

Projecting 37 4. Press the red P Power button on top of the projector—or press the P Power button on the remote control. (If this is your first time using the remote control, make sure the batteries are installed and the on/off switch on the side of the remote is turned on; see page 52.) The P Power light flashes green as the projector warms up, [...]

38 Projecting Selecting the Image Source Selecting the image source lets you switch between images input from different pieces of equipment conn ected to the projector (such as a computer or DVD player). If you don’t see the image you want, select it using the Source buttons either on the projector or the remote control. The Source buttons work a[...]

Projecting 39 What To Do If You See a Blank Screen If you see a blank screen or a b lu e s c r ee n w i t h t h e No Signal message, try the following: ■ Make sure the cables are connected correctly, as described in Chapter 1. ■ Make sure the P Power light is green and not flashing and the lens cap is off. ■ If you’ve connected more than on[...]

40 Projecting From the Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced . The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external Monitor port is s et as your primary display and/or enabled. See your comput er’[...]

Projecting 41 If you’re using OS 8.6 to OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Co ntrol Panels , then click Monitors or Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. If the Arrange opt[...]

42 Projecting Adjusting the Image Once you see your image, you need to make certain adjustments: ■ To focus or zoom your image, see below. ■ If the image is too high or too low, you can reposition it. See page 43. ■ If the image isn’t square, see p age 44. ■ If a computer image displays incorrectly, see page 47. If you need to fine-tune t[...]

Projecting 43 Adjusting the Height of Your Image If the image is too low on the screen, you can use the front adjustable foot to raise it. 1. Stand behind the projector. Press th e blue foot release lever up and lift the front of the projector. 2. Once the image is positioned where you want it, release the lever to lock the foot in position. 3. If [...]

44 Projecting Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in fron t of the center of the scre en with the base of the lens level with the bottom of the screen. Even if the projector is slightly tilted (within a range of 40° up or down), the projector has an automatic key[...]

Projecting 45 Using Keystone Correction To adjust your image when it is wider on one side, do the following: ■ Look at the shapes of the icons on the projector’s four Keys tone buttons. Press the button whose icon is the mirror image of the shape of your screen image. Continue pressing the button until you are satisfied with the shape of the im[...]

46 Projecting You see this screen: 5. Press the Enter button to select th e corner you want to adjust. 6. Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape. 7. Repeat steps 5 and 6 as needed to adjust any remaining corners. 8. When done, press the ESC button on th e remote control or projector?[...]

Projecting 47 Correcting Computer Images If you’re connected to a computer and the imag e doesn’t look right, press the Auto button on the remote control (or the Auto/Enter button on the projector’s control pan el). This automatically resets the projector’s tracking, sync, resolution, and position settings. If vertical stripes appear in the[...]

48 Projecting Projecting Images Without a Screen Even if you don’t have a screen, you can project images onto surfaces like blackboards and colored walls without loss of image color. Your projector has a sensor that measures the conditions of the projection surface and automatically adjusts the colors and shading of your image. For example, if yo[...]

Projecting 49 Adjusting Color Corrections for a New Surface Adjust the correction values if you’re projecting on a new surface or in a new location. 1. Press the Wall Shot button on the remote control or projector while you’re projecting an image. Wait for the Wall Shot status screen. 2. Press the Wall Shot button until you see Wall Shot Readju[...]

50 Projecting 3. Press the P Power button again. The power light flashes orange for about 30 seconds as the projector cools down. After the projector has cooled, the orange ligh t stays on and the exhaust fan shuts off. If you want to tu rn the projector on again, w ait until the orange light stops flashing. Then press the P Power button. 4. If you[...]

51 1 Using the Remote Control T he remote control lets you access your projector’s features from anywhere in the room—up to 33 feet away. For example, you can turn the projector on and off, preview an d switch between picture sources, turn off picture and sound, freeze the p resentation, zoom in on a portion of your image, and access the menu s[...]

52 Using the Remote Control Activating and Using the Remote Control The remote control has an ON/OFF switch on its side, as shown. Before using the remote, make sure batteries are installed as described on page 54, then push up on the ON/OFF switch to turn it on. Turn off the remote control before transporting or storing it; this prevents the batte[...]

Using the Remote Control 53 Using the Navigation Buttons The remote control has various buttons that let you navigate the projector’s help and menu systems; they also let you use the drawing tools to highlight your presentation. If you’ve connected a computer, the buttons can be used in place of your computer’s mouse, letting you walk about f[...]

54 Using the Remote Control Replacing the Batteries If the projector stops responding to the remote control, check the following: ■ Make sure the remote control’ s ON/OFF switch (shown on page 52) is in the ON position. ■ Press the light button and check to see if the buttons on the remote control light up. (If you’re in a bright room, you [...]

Using the Remote Control 55 Controlling the Picture and Sound You can use the remote control to pr eview and select your pictur e sources, temporarily turn off the picture and sound, freeze the acti on, zoom in on the picture, display a picture-in-picture image, and adjust the volume. Switching Between Picture Sources If your projector is connected[...]

56 Using the Remote Control Previewing Picture Sources You can use the Preview function to help you select the image source. 1. Press Preview on the remote control. You see the currently selected source displayed in the main window, as shown. All other so urces (inc luding the currently selected source) are displayed in smaller preview windows on t[...]

Using the Remote Control 57 Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound and darken your screen. (If you’ve connected an external monitor to the projector, it will continue displaying.) This feature is useful if you want to temporarily redirect your audience’s attention [...]

58 Using the Remote Control 3. Continue pressing the E-Zoom button to enlarge the selected area up to 4 × . 4. While the image is enlarged, you can: ■ Use the pointer button to pan about. ■ Press the E-Zoom button to zoom out. 5. When done, press the E SC button to return to the original size. Displaying a Picture-in-Picture Video If you’re [...]

Using the Remote Control 59 3. Once the window is located and sized the way you want it, press the Enter button; your video continues playing on the screen. 4. When you’re finished viewing the Pict ure-in-Picture, press the Pi nP or pointer button again. The window disappears. Highlighting Your Presentation You can display a pointer to call out s[...]

60 Using the Remote Control 2. Use the pointer button on the remote control to position the pointer on the screen. 3. To draw a straight li ne, place the pointer where you want the line to begin and press Enter . Move the pointer to where you want the line to end, and press Enter again. 4. To draw a curved line, place the pointer at the start of th[...]

Using the Remote Control 61 2. For each of the thre e Pointer/ Line icons, you can change the following settings: ■ Shape Lets you select one of the following pointer shapes: ■ Zoom Rate Changes the size of the pointer ■ Color Changes the color of the line you can draw using the pointer ■ Width Changes the line width 3. You can also change [...]

62 Using the Remote Control Operating Your Computer with the Remote Control If you’ve connected a computer to the projector with a USB cable, as described on page 31, you can use the remote control in place of your computer’s mouse. This gives you more flexibility when delivering PowerPoint and other slideshow-sty le presentations, since you wo[...]

Using the Remote Control 63 Controlling Multiple Projectors If you’re using more than one projector, you can control all the projectors—or just selected ones—b y using the projector ID system. To operate a projector, you have to set the remote control’s ID to match that of the projector. Or you can control all of the projectors simultaneous[...]

64 Using the Remote Control Setting the Remote Control ID The remote control’s default ID is zero. If you need to change it, follow these steps: 1. Press the ID button on the remote control. You see it light. 2. Press one of the numbered buttons on the remote control to select the desired ID (0 through 9). Select zero t o control all projectors, [...]

65 1 Fine-tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system ■ Adjusting the image quality ■ Adjusting the image size, shape, and position ■ Adjusting the color ■ Adjusting the sound ■ Customizing proje[...]

66 Fine-tuning the Projector Using the Menu System You can use the remote control (or the projector’s control panel) to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button. You see a menu scre en similar to the one shown below (the settings may differ from those shown here, depending on t[...]

Fine-tuning the Projector 67 4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the Enter button to see a sub-screen for changing the setting. ■ Press the left or right side of the pointer button to adjust a slider bar. ■ To select from two or more settings, us[...]

68 Fine-tuning the Projector Adjusting the Image Quality You can use the Video menu to adjust the brightness, sharpness, color, tint, and contrast. If you’re projecting from a computer (but not through the DVI port), there are additional adjustments you can make (see page 6 9). Adjusting Images fr om Video Sources 1. Press the Menu button on the [...]

Fine-tuning the Projector 69 ■ Color Adjusts the color intensity, from black-and-white to full color (not available for RGB video images). ■ Tint Adjusts the tint of the image (not available for RGB video images). ■ Sharpness Adjusts the sharpness of the image. Adjusting Computer Images You can also adjust brightness, contrast, and sharpness [...]

70 Fine-tuning the Projector ■ Sync Adjust this value if the image appears blurry or flickers. ■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference betw een light and dark areas. Select Auto to let the projector adjust the contrast automatically , or select Manual to adjust the setti ng yourself. (Press Enter [...]

Fine-tuning the Projector 71 Adjusting the Image Size, Shape, and Position Whether you’re projecting from a computer or video player, you can use these settings t o adjust the size , shape, and position of the image. ■ Resize button Adjusts how an image fits into the display area. For computer images, resizing is normally unnecessary, since the[...]

72 Fine-tuning the Projector Adjusting the Color The projector provides several ways for you to adjust the color: ■ Color Mode button (also in the Video me nu) Lets you quickly adjust the co lor and brightness for various environments. Use either the remote control or the Color Mode setting in the Video menu; you can save a different setting for [...]

Fine-tuning the Projector 73 Adjusting the Sound You can use the Audio menu to adjust the sound volume or treble/bass balance. 1. Press the Menu button on the remote control, then enter th e Audio menu. You see the Audio menu screen: 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Volume Adjusts the volume ?[...]

74 Fine-tuning the Projector Customizing Projector Features You can use the menu system to change the video signal input at certain ports, turn sleep mode on or off, adjust the network settings, change the language, and customize several other features. Image Setup Options Use these settings to change how the projector processes inco ming video sig[...]

Fine-tuning the Projector 75 ■ Progressive (in t he Advanced1 menu) This setting should normally be left at its default setting ( Video or Film/Auto ). Converts interlaced sign als to progressive signals. When set to OFF , interlaced signals are processed without conversion (available for video signals only). ■ BNC Sync Termination (in the Adva[...]

76 Fine-tuning the Projector Miscellaneous Setup Options ■ No-Signal Msg. (in the Setting menu) Selects a screen color or image to display when the projector is not receiving a signal. Th e logo setting displays an image that you previously transferred to the projector (see page 78). ■ Sleep mode (in the Setting me nu) When sleep mode is on, th[...]

Fine-tuning the Projector 77 Using the Projector’s Security Features To prevent unauthorized use of the pr ojector, you can do the following: ■ Create an identifying user logo th at is displayed at startup and/or when the A/V Mute button is pr essed ■ Assign a password; this can be disabled for a set period if you want to loan the projector t[...]

78 Fine-tuning the Projector Creating Your Own Screen Logo You can transfer any image on your computer to the projector, and then use it as the startup screen and/or the screen that is displayed when you press the A/V Mute butt on. The image can be a company logo, slogan, photograph, or any other image you want to use. The projector considers this [...]

Fine-tuning the Projector 79 7. When you se e this screen, sele ct a zoom rate (display size), and then press Enter . 8. When you see th e message Save image as user’s logo? , select Yes and press Enter . Saving t he logo takes about 15 seconds. Do not use the projector or other so urces (computer, video, etc.) while the logo is being saved. 9. W[...]

80 Fine-tuning the Projector 5. Select the screen(s) on which you want your image to appear: ■ Select No-Signal Msg. if you want to dis play your image (instead of a blank screen) wh en there is n o video signal incoming from the currently selected source. Then select Logo . ■ Select A/V Mu te if you want your image to appear when you press the[...]

Fine-tuning the Projector 81 The password will be displayed as **** . After you enter the last digit, a confirmation screen appears. Enter the password again. 5. After you finish setting the password, press the Esc button to return to the Password Protect menu. 6. Press the Num button on the remote control to turn off the numeric keypad. Make a not[...]

82 Fine-tuning the Projector 6. Press Menu to close the Password Protect menu. 7. Turn off the projector and unpl ug the power cord t o enable password protection. When you turn the projecto r on again, you will need to enter a password. Follow the instructions in the next section. Starting the Projector with a Password When the password function i[...]

Fine-tuning the Projector 83 If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance. See “Where To Get Help” on page 121. If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson to unlock it. Disa[...]

84 Fine-tuning the Projector[...]

85 1 Managing the Projector from a Remote Computer Y our projector’s Easy Management software lets you monitor and control your projector(s) from a remote computer in several ways: ■ Use EMP Monitor to see your project ors’ status, switch image sources, and control basic settings. ■ Use EMP NetworkManager to receive e-mail notifications ale[...]

86 Managing the Projector from a Remote Computer Installing the Easy Management Software The projector software CD-ROM in cludes the software you need to use the projector’s EMP Monitor and EMP NetworkManager. System Requirements Before you install the software, make sure y our computer meets thes e requirements: ■ Microsoft ® Windows 98 SE, X[...]

Managing the Projector from a Remote Computer 87 2. Click In stall to install both EMP Monitor and EMP Network Manager. 3. Follow the on-screen instructions to install the software. 4. When you’re finished, click Exit . Once installed, you can access these programs from your computer’s Start menu. Connecting and Configuring the Projector Before[...]

88 Managing the Projector from a Remote Computer 3. Press the Menu button on the remote control and select Ne twork from the Advanced 2 menu. 4. If your network assigns addresses automatically, turn on DHCP . 5. If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Addres s , Subne t Mask , Gateway A [...]

Managing the Projector from a Remote Computer 89 ■ To change the network addresses from the projector’s control panel, press the right and left arrow buttons to select the part of the address you want to enter, then use the up and down arrow buttons to increase or decrease the numeric value. When you finish changing an address in the network me[...]

90 Managing the Projector from a Remote Computer Opening and Closing EMP Monitor To start EMP Monitor, click Start > Programs or All Programs > EPSON Projector > EMP Monitor . If you’ve added the program to th e Startup programs folder (see page 95), then it may already be open. If so, click the icon in the system tray on the lower-right[...]

Managing the Projector from a Remote Computer 91 2. Click Registe r projecto r as shown. You see this screen: 3. Click Auto detect to locate projectors currently operating on the network. Or click Manual registration and enter the projector’s name and network address. Any projectors found on the netw ork are listed as shown below: 4. Select each [...]

92 Managing the Projector from a Remote Computer You see this screen with a list of all registere d projectors. 5. Click Close . You see the status of each of your re gistered project ors on the main EMP Monitor screen: note To delete a proje ctor from the list, highlight the projector name, and click Delete .[...]

Managing the Projector from a Remote Computer 93 Monitoring Your Projectors The EMP Monitor screen lets you monitor your projector s using the Status, Video Source, and Error icon s shown below. This lets you see which projectors are currently being used, from which source (o r port) they are projecting an image, and if a problem occurs. For detail[...]

94 Managing the Projector from a Remote Computer The following table explains the me aning of the video source icons: The following tabl e explains the meaning of the error icons (see Chapter 7 for r ecommended solutions to proble ms): Video source icons Computer, Computer1, or InputA Computer2 or InputB S-Video Video D4 (Digital) DVI or HDMI (Digi[...]

Managing the Projector from a Remote Computer 95 Controlling Your Projectors The control buttons in the upper-right let you turn on and off the projectors and select video source s. (Hold the mouse pointer over a button to see a description of it s me aning.) Make sure you’ve selected the projector you want to operate (with the mouse pointer) bef[...]

96 Managing the Projector from a Remote Computer Using EMP NetworkManager You can use EMP NetworkManager to send out messages by e-mail, notifying you when a problem occurs with a projector. Before running EMP NetworkManager, make sure yo u’ve installed the software as described on page 86. Then follow the steps below to create e-mail settings fo[...]

Managing the Projector from a Remote Computer 97 3. Enter the projector’s IP address and click Add . The projector’s icon is added to the EMP NetworkManager screen. 4. Click Connect to connect the projector to the network. Setting a Password You can set a password to restrict access to each projector from EMP NetworkManager: 1. Right-click the [...]

98 Managing the Projector from a Remote Computer 3. EMP NetworkManager connects to the projector, and you see this scree n: 4. Verify that the network settings are correct. (If DHCP is on, you don’t need to verify network settings .) ■ Make any desired changes to the projector’s network address configuration (turning off DHCP enables the manu[...]

Managing the Projector from a Remote Computer 99 6. Select ON for the Mail Notification setting. 7. Enter the IP address and port numb er of the SMTP server used for sending e-mail. (The port’s de fault setting is 25, but you can enter any number from 1 to 65535.) 8. Enter up to three e-mail addresses where you want the event notification message[...]

100 Managing the Projector from a Remote Computer[...]

101 1 Maintaining the Projector Y our projector needs little maintenance. All you have to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. You also need to periodically clean th e air filters at the side and base of the projector. A clogged air filter ca n block ventilation needed to [...]

102 Maintaining the Projector Cleaning the Lens Clean the lens whene ver you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or sme ars on the lens, use lens-c leaning tissue. If necessary, moisten a soft cloth with lens cleaner and gent ly wipe the lens surface. Cleaning the Projector Cas[...]

Maintaining the Projector 103 Cleaning the Air Filters and Vents Clean the air filters and air vents after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: 1. Turn off the projector and unplug the p[...]

104 Maintaining the Projector 4. If the dirt is difficult to remove or a filter is broken, replace the filters as in the following section. Contact your dealer or call Epson at (800) 873-7766 in the Unite d States to obtain new ones. In Canada, please call (800) 4 63-7766 for dealer referral. Replacing the Lamp and Air Filters The projection lamp t[...]

Maintaining the Projector 105 4. Turn the projector over and remove the air filters at the side and bottom of the projector. 5. Insert the two new air filters. They should click into place. 6. Insert the screwdriver supplied with the spare lamp, or some other flat-tipped screwdriver, into the space beside the air vent. Gently slide the lamp cover u[...]

106 Maintaining the Projector 7. Loosen the two screws holding th e lamp in place ( you don’t need to remove them). 8. Grasp the wire handle as shown and pull the lamp straight out. 9. Gently insert the ne w lamp. 10. Once th e lamp is fully inserted, tighten its screws and replace the cover. (The projector won’t come on if the lamp cover is lo[...]

Maintaining the Projector 107 Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu. 1. Plug the projector in and turn it on. 2. Press the Menu button on the remote control (or on the projector’s control panel). You see the main menu. 3. Use the pointer button on the remote control (or [...]

108 Maintaining the Projector Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent injury or damage: ■ When hand-carrying the projector, you should use the handle to lift it only a short distance (for example, to set it on a table). ■ When shipping the projector for repairs, use th[...]

109 1 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: ■ Using the projector’s on-screen help system ■ What to do when the projec tor’s status lights flash ■ Solving problems with the ima[...]

110 Solving Problems Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Problems with image ■ Problems with sound ■ Language change Follow these steps to get he lp: 1. [...]

Solving Problems 111 Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the P Power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If thi s doesn’t solve the problem, check the lights on top of the projector. What To Do When the L[...]

112 Solving Problems flashing red flashing orange Rapid cooling in progress. Although this is not an abno rmal condition, projection will stop automatically if the temperature rises too high again. Make sure there is plenty of space around and under the projector for ventilation, and that the air filters and vents are clear. red The projector is ov[...]

Solving Problems 113 The Power light is flashing orange and you cannot turn on the projector. The lamp is cooling down. Wait until the light turns off and then press the Power button to turn on the projector. The Power light does not come on. Make sure the power cord is connected securely both at the power outlet and the projector. If you h ave jus[...]

114 Solving Problems Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the P Power light is green, not flashing, and the lens cap is off. ■ The projector may be in sleep mode. If the P Power light is orange, press the Power button to turn the projector on. ■ If the power was switched off and then on again, [...]

Solving Problems 115 If you’re using a PC notebook: ■ Hold down the Fn key on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CR T/LC D . Allow a few seconds for the projector to sync up after pressing it. Check your notebook’s manual or on line help for[...]

116 Solving Problems The message Not Supporte d is displayed. ■ Make sure the correct Input Signal is selected in the Setting menu (see page 74). ■ Make sure your computer’s resolution doesn’t exceed UXGA (1600 × 1200), and the frequency is support ed by the projector (see page 128). If necessary, chan ge your computer’s r esolution sett[...]

Solving Problems 117 The image isn’t square, but keystone-shaped. ■ If the top or bottom of the image is broader, press the Sync + or Sync – button on the projector until the image is square. ■ If the projector is angled toward the screen from the left or right, the image will be broader on one side. Center the projector in front of the mid[...]

118 Solving Problems ■ Make sure the projector is within the recommended projec tion distance (2.5 to 36.5 feet). ■ Adjust the Sharpness setting on the Video menu (see Chapter 4). When you change video settings, you should be able to see the effect on the screen immediately. If you’re proj ecting from a computer, you may also need to adjust t[...]

Solving Problems 119 3. Adjust the Sync set ting to increase the sharpness of the image. The colors of the image are not right. ■ If you’re displaying a computer image, use the Color Mode option in the projector’s Video menu to adjust the color. If you’re displaying video, adjust the Color , Tint , and Color Mode settings on the Video menu.[...]

120 Solving Problems Solving Easy Management Problems You don’t see your projector in the EMP Monitor window. ■ Make sure that you’ve connected the projector to the network and configured it correctly; see page 87. Also, make sure you’ve registered the projector with EMP Monitor. Se e page 90. ■ Make sure that Standby Mode in the Ad vance[...]

Solving Problems 121 Where To Get Help Internet Support Visit Epson’s support website at http://support.epson.com and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Visit http://www.presentersonline.com to access tips, te[...]

122 Solving Problems[...]

123 A Appendix A: Projector Installation T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room. Installation Guidelines The projector can be installed for fo ur different viewing setups: front projection, ceiling mounting, rear pr ojection onto a semi-transparent screen, or rear[...]

124 Appendix A: Projector Installation If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to til t it down to position the image on-screen. This causes the image to lose its square shape. You can then correct the distortion by using the Keystone function in the projector’s menu system (see page 71[...]

125 A Appendix B: Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 1.0 inch (25.4 mm) Lens F=1.7 to 2.3, f=28 to 3 7 mm Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 24 bit, 16.7 million colors Brightness 4000 lumens (High brightness mode) 3500 lumens (Low brig htn[...]

126 Appendix B: Technical Specifications Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 250 W Lamp life Up to 2000 hours (high brightness mode) Up to 3000 hours (low brightness mode ) Part number V13H010L22 Remote Control Range 33 feet (10 meters) Batteries (2) Alkaline size AA Mouse Compatibility Supports USB Dimensions Height [...]

Appendix B: Technical Specifications 127 Environmental Temperature Operating: 41 to 104 ° F (5 to 40 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90 % RH, non-condensing Operating altitude 0 to 7,500 ft (0 to 2,286 m) Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950 Thir[...]

128 Appendix B: Technical Specifications Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a co mputer, the computer’s video card must be set at a refresh rate (vertica l frequency) that’s compatible with the proj[...]

Appendix B: Technical Specifications 129 * The image is resized using Epson’s SizeWise ™ Technology. UXGA—60 UXGA—65 UXGA—70 UXGA—75 UXGA—80 UXGA—85 60 65 70 75 80 85 1600 × 1200 * 1600 × 1200 * 1600 × 1200 * 1600 × 1200 * 1600 × 1200 * 1600 × 1200 * MAC13 MAC16 MAC19 MAC21 67 75 75 75 640 × 480 * 832 × 624 * 1024 × 768 115[...]

130 Appendix B: Technical Specifications[...]

131 A Appendix C: Notices T his appendix includes safety instru ctions and other important info rmation about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near w[...]

132 Appendix C: Notices ■ Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User’s Guide , do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expo se you to dangerous vo[...]

Appendix C: Notices 133 Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the follow ing conditions: ■ There is an object between the remote control IR emitter and the IR receiv[...]

134 Appendix C: Notices Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; an d/or CPU Boards and Power Suppli es used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole respo[...]

Appendix C: Notices 135 FCC Compliance Statement For United States Users This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation. This equipment genera[...]

136 Appendix C: Notices Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered : Epson America, Inc. (“Epson” ) warrants to the original retail purchaser of the Epson product enclosed with this limited warranty statement that the product, if purchased and operated in the United States or C[...]

Appendix C: Notices 137 THE WARRANTY AND REMEDY PROVIDED ABOV E ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDIN G, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABI LITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMP[...]

138 Appendix C: Notices[...]

139 Index A A/V Mute, 57, 78 to 80, 114 About menu, 107, 113 Accessories, 15, 121 Adapter, Macintosh, 14, 15, 30 Air filter cleaning, 103 to 1 04 ordering, 15 replacing, 104 to 106 Alerts, email, 96 to 99 Anti-theft device, 15, 19 Aspect ratio, 125 Audio adjusting volume, 47, 73 cable, 10, 34 connecting equipment, 33 to 34 menu, 73 problems, troubl[...]

140 Index D Declaration of Conf ormity, 134 Default password, 77 Default settings, restoring, 67 Desktop adapter, Ma cin tosh, 14, 15, 30 Direct Power ON, 76 Distance from projector to sc reen, 18, 125 Documentation, 11 DVD player, connecting, 20 to 25 DVI cable, 15, 29 DVI port, connecting to, 29 E Easy Management configuring the projector, 87 to [...]

Index 141 Language setting, 7 6 Lens cleaning, 102 ordering, 15 specif ications, 12 5 Lights, status, 111 to 113 Logo creating, 78 to 79 displaying, 79 to 82 M Macintosh desktop adapter, 14, 15, 30 Manuals, 11 Menus About, 107, 113 Audio, 73 default settings, restoring, 67 User’s Logo, 78 t o 79 using, 66 to 67 Video, 68 to 70 Monitor, connecting[...]

142 Index Projecting without screen, 48 to 49 Projection distance, 18, 125 Projection lamp, see Lamp Projector carrying case, 15, 108 cleaning, 102 connections, see Connecting projector disabling buttons, 83 distance from sc reen, 18, 125 ID, setting, 63 installi ng, 123 to 12 4 lamp specifications, 126 monitoring remotely, 85 to 99 multiple projec[...]

Index 143 Sound adjusting, 47, 73 troubleshooting, 119 Source previewing, 56 selecting, 38, 55 to 56 , 74 to 75 viewing, 113 Speaker, specifications, 125 Speakers, connecting, 34 Specifications brightness, 125 dimensions, 126 electrical, 126 environmental, 127 general, 125 lamp, 126 lens, 125 remote control, 126 resolution, 125 safety, 127 Standby [...]

144 Index W Wall Shot, 48 to 49 Warning lights, 111 to 113 Warranty, 12, 136 to 137 Wireless, mouse, 31, 62 Z Zoom ratio, 125 Zooming image, 4 2, 57 to 58[...]

Focus ring Remote control receiver Air exhaust vent Foot release lever Zoom ring T emperature light Lamp light Power light Control panel Lens cover Handle Air filter Adjustable foot Remote control receiver Computer port Network port BNC ports Audio-out port Remote port Control port for service use only USB port Video port and related audio ports S-[...]

Focus ring Remote control receiver Air exhaust vent Foot release lever Zoom ring T emperature light Lamp light Power light Control panel Lens cover Handle Air filter Adjustable foot Remote control receiver Computer port Network port BNC ports Audio-out port Remote port Control port for service use only USB port Video port and related audio ports S-[...]