Français dropdown-ico

Gigabyte GA-586SG manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Gigabyte GA-586SG. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Gigabyte GA-586SG ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Gigabyte GA-586SG décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Gigabyte GA-586SG devrait contenir:
- informations sur les caractéristiques techniques du dispositif Gigabyte GA-586SG
- nom du fabricant et année de fabrication Gigabyte GA-586SG
- instructions d'utilisation, de réglage et d’entretien de l'équipement Gigabyte GA-586SG
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Gigabyte GA-586SG ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Gigabyte GA-586SG et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Gigabyte en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Gigabyte GA-586SG, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Gigabyte GA-586SG, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Gigabyte GA-586SG. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    R-10-01-080106 586SG USER'S MANUAL ¯ Support Intel Pentium, MMX/Cyrix/IBM 6x86MX & AMD K5 ,K6 CPUs. ¯ Support auto detect CPU Voltage. ¯ Support auto detect four positive Voltages and Fan Speed. ¯ Support Parity check or Ecc Function. ¯ Support Ultra DMA/33 Function. ¯ Support Fully AGP 1.0 Specification. ¯ Support switching mode Vo[...]

  • Page 2

    [...]

  • Page 3

    586SG 1 The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. ¯ THIRD-PARTY BRANDS AND NAMES ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. JANUARY 6, 1998 Taipei, Taiwan[...]

  • Page 4

    Quick Installation Guide 2 I. Quick Installation Guide: CPU SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 JP4 JP5 JP6 1. Pentium  Processor 90 MHz ON OFF OFF OFF OFF OFF ON OFF 2-3 2-3 2-3 2. Pentium  Processor 100 MHz OFF OFF OFF OFF OFF OFF ON OFF 2-3 2-3 2-3 3. Pentium  Processor 120 MHz ON ON OFF OFF OFF OFF ON OFF 2-3 2-3 2-3 4. Pentium  Process[...]

  • Page 5

    586SG 3 16. P54CTB-166 MHz OFF ON ON OFF OFF OFF ON OFF 2-3 2-3 2-3 17. P54CTB-180 MHz ON OFF ON OFF OFF OFF ON OFF 2-3 2-3 2-3 18. P54CTB-200 MHz OFF OFF ON OFF OFF OFF ON OFF 2-3 2-3 2-3 19. AMDK5-PR133 OFF ON OFF OFF OFF OFF ON OFF 2-3 2-3 2-3 20. AMDK5-PR166 OFF ON ON OFF OFF OFF ON OFF 2-3 2-3 2-3 CPU SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 JP4 JP5 JP[...]

  • Page 6

    Quick Installation Guide 4 35. Cyrix/IBM 6x86MX-PR200 (66*2.5 2.9V) OFF ON ON OFF OFF ON ON OFF 2-3 2-3 2-3 36. Cyrix/IBM 6x86MX-PR200 (75*2 2.9V) OFF ON OFF OFF OFF ON ON OFF 1-2 2-3 1-2 37. Cyrix/IBM 6x86MX-PR233 (66*3 2.9V) OFF OFF ON OFF OFF ON ON OFF 2-3 2-3 2-3 38. Cyrix/IBM 6x86MX-PR233 (75*2.5 2.9V) OFF ON ON OFF OFF ON ON OFF 1-2 2-3 1-2 C[...]

  • Page 7

    586SG 5[...]

  • Page 8

    Quick Installation Guide 6 1. Pentium  Processor 90 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 Pentium Processor 90 MHz R ON 1 2 3 4 5 6 7 8 OFF 8 1 2. Pentium  Processor 100 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW [...]

  • Page 9

    586SG 7 3. Pentium  Processor 120 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Pentium Processor 120 MHz R ON 1 2 3 4 5 6 7 8 OFF 4. Pentium  Processor 133 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 J[...]

  • Page 10

    Quick Installation Guide 8 5. Pentium  Processor 150 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Pentium Processor 150 MHz R ON 1 2 3 4 5 6 7 8 OFF 6. Pentium  Processor 166 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 S[...]

  • Page 11

    586SG 9 7. Pentium  Processor 180 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Pentium Processor 180 MHz R ON 1 2 3 4 5 6 7 8 OFF 8. Pentium  Processor 200 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 J[...]

  • Page 12

    Quick Installation Guide 10 9. Intel MMX-150 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Intel MMX-150MHz ON 1 2 3 4 5 6 7 8 OFF 10. Intel MMX-166 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8[...]

  • Page 13

    586SG 11 11. Intel MMX-200 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Intel MMX-200MHz ON 1 2 3 4 5 6 7 8 OFF 12. Intel MMX-233 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Intel MMX-233MH[...]

  • Page 14

    Quick Installation Guide 12 13. P54CT-150 MHz P54CT-150 MHz ON 1 2 3 4 5 6 7 8 OFF CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 14. P54CT-166 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 P54CT-1[...]

  • Page 15

    586SG 13 15. P54CTB-150 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 P54CTB-150 MHz ON 1 2 3 4 5 6 7 8 OFF 16. P54CTB-166 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 P54CTB-166 MHz ON 1 2 3[...]

  • Page 16

    Quick Installation Guide 14 17. P54CTB-180 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 P54CTB-180 MHz ON 1 2 3 4 5 6 7 8 OFF 18. P54CTB-200 MHz CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 P54C[...]

  • Page 17

    586SG 15 19. AMDK5-PR133 CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 AMDK5-PR133 ON 1 2 3 4 5 6 7 8 OFF 20. AMDK5-PR166 CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 AMDK5-PR166 ON 1 2 3 4 5 6 7 8 O[...]

  • Page 18

    Quick Installation Guide 16 21. AMD-K6/166 (2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 AMD-K6/166 (2.9V) ON 1 2 3 4 5 6 7 8 OFF 22. AMD-K6/180 (2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1[...]

  • Page 19

    586SG 17 23. AMD-K6/200 (2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 AMD-K6/200 (2.9V) ON 1 2 3 4 5 6 7 8 OFF 24. AMD-K6/233 (3.2V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 AMD-K6/233 (3.[...]

  • Page 20

    Quick Installation Guide 18 25. Cyrix / IBM 6x86-120 MHz-PR150+ CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86-120MHz-PR150+ ON 1 2 3 4 5 6 7 8 OFF 26. Cyrix /IBM 6x86-133 MHz-PR166+ CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 [...]

  • Page 21

    586SG 19 27. Cyrix /IBM 6x86-150 MHz-PR200+ CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86-150MHz-PR200+ ON 1 2 3 4 5 6 7 8 OFF 28. Cyrix / IBM 6x86L-PR150+ (2.8V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP[...]

  • Page 22

    Quick Installation Guide 20 29. Cyrix / IBM 6x86L-PR166+ (2.8V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86L-PR166+ (2.8V) ON 1 2 3 4 5 6 7 8 OFF 30. Cyrix / IBM 6x86L-PR200+ (2.8V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 [...]

  • Page 23

    586SG 21 31. Cyrix / IBM 6x86MX-PR150 ( 60x2 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86MX-PR150 (60* 2 2.9V) ON 1 2 3 4 5 6 7 8 OFF 32. Cyrix / IBM 6x86MX-PR166 ( 60x2.5 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1[...]

  • Page 24

    Quick Installation Guide 22 33. Cyrix / IBM 6x86MX-PR166 ( 66x2 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86MX-PR166 (66* 2 2.9V) ON 1 2 3 4 5 6 7 8 OFF 34. Cyrix / IBM 6x86MX-PR200 ( 60x3 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 [...]

  • Page 25

    586SG 23 35. Cyrix / IBM 6x86MX-PR200 ( 66x2.5 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86MX-PR200 (66* 2.5 2.9V) ON 1 2 3 4 5 6 7 8 OFF 36. Cyrix / IBM 6x86MX-PR200 ( 75x2 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1[...]

  • Page 26

    Quick Installation Guide 24 37. Cyrix / IBM 6x86MX-PR233 ( 66x3 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86MX-PR233 (66* 3 2.9V) ON 1 2 3 4 5 6 7 8 OFF 38. Cyrix / IBM 6x86MX-PR233 ( 75x2.5 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM[...]

  • Page 27

    586SG 25 39. Cyrix / IBM 6x86MX-PR233 ( 83x2 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86MX-PR233 (83* 2 2.9V) ON 1 2 3 4 5 6 7 8 OFF 40. Cyrix / IBM 6x86MX-PR266 ( 66x3.5 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1[...]

  • Page 28

    Quick Installation Guide 26 41. Cyrix / IBM 6x86MX-PR266 ( 75x3 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 1 JP4 1 1 JP5 1 1 JP6 1 8 1 Cyrix/IBM 6x86MX-PR266 (75* 3 2.9V) ON 1 2 3 4 5 6 7 8 OFF 42. Cyrix / IBM 6x86MX-PR266 ( 83x2.5 2.9V) CPU 1 1 1 2 3 JP4 J JP5 J JP6 4 5 DIMM1 BANK1 BANK0 DIMM[...]

  • Page 29

    586SG 27 II. Quick Installation Guide of Jumper setting: PWR : ACPI LED / Key-Lock Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Pin No. Function 1 2 LED anode (+) Signal 3 NC 4 5 Key Lock GND SPK : Speaker Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 [...]

  • Page 30

    Quick Installation Guide 28 TD : Turbo LED Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Pin No. Function 1 2 LED anode (+) LED cathode (-) TB : Turbo Switch Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 Function Reserved.[...]

  • Page 31

    586SG 29 RST : Reset Switch CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Close : For hardware reset system. 1 Open : Normal operation. GN : Green Function Switch CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Close : For system entering Green mode. 1 O[...]

  • Page 32

    Quick Installation Guide 30 HD : IDE Hard Disk Active LED CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Pin No. Function 1 2 LED anode (+) LED cathode (-) SOFT PWR : POWER ON/OFF (For ATX Power Supply Use Only) CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8[...]

  • Page 33

    586SG 31 JP3: FAN : CPU Cooling Fan Power Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Pin No. Function 1 2 +12V GND 3 Signal J4 : USB Port CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 Function VCC USBD0+ GND VCC USBD0- USBD1- USBD1+ GND Pin [...]

  • Page 34

    Quick Installation Guide 32 J3 : PS/2 Mouse CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 RED 1 J2 : Keyboard Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 Pin No. Function 1 2 3 4 5 Key Clock. Key Data NC VCC GND 1 4 2 5 3[...]

  • Page 35

    586SG 33 CN2 : COM A CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 RED LINE CN3 : COM B CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 RED LINE[...]

  • Page 36

    Quick Installation Guide 34 CN4 : LPT PORT CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 RED 1 J1 : AT Power Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Pin No. Function 1 2,10,11,12 3 4 5,6,7,8 VCC (+5V) Power Good signal GND +12V -12V -5V 9[...]

  • Page 37

    586SG 35 U1 : ATX Power Connector CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 Pin No. Function 3,5,7,13,15- 4,6,19,20 GND 10 12 18 8 +12V -12V -5V VCC (+5V) Power Good 9 14 5V SB (Stand by +5V) PS-ON (Soft ON/OFF) 1 11 CN1 : FLOPPY PORT CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 [...]

  • Page 38

    Quick Installation Guide 36 IDE1 : For Primary IDE port CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 RED LINE 1 IDE2 : For Secondary IDE port CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 RED LINE 1[...]

  • Page 39

    586SG 37 JP15 : Wake on Lan (with intel 82557 chip) ( for ATX Power Supply only) CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 SW + + + 8 1 1 Pin No. Function 1 2 3 +5V SB GND Signal JP2 : Keyboard Power-on ( for ATX Power Supply only) CPU 1 1 1 2 3 JP4 JP5 JP6 4 5 DIMM1 BANK1 BANK0 DIMM2 1 1 1 1 1 1 1 1 1 1 1 1 1 [...]

  • Page 40

    Quick Installation Guide 38 SW : For CPU INT./EXT.FREQ. Speed Hz x 1.5 x 2 x 2.5 60 MHz 66 MHz x 3 x 3.5 x 4 x 4.5 x 5 x 5.5 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5 7 8 OFF ON 2 1 3 4 6 5[...]

  • Page 41

    586SG 39 * AUTO VOLTAGE: INTEL, CYRIX, AMDK5 2.9V:AMD-K6/166/180/200 3.2V:AMD-K6/233 SW1 MHz ON 60 OFF 66 ON 83 75 OFF JP6 2-3 2-3 2-3 1-2 JP5 2-3 2-3 1-2 2-3 JP4 2-3 2-3 1-2 1-2 1 1 1 CPU JP4 1 1 JP5 1 1 JP6 5 6 7 X X O X X X SW 4 AUTO X 2.0 V X 2.1 V X X O X 2.2 V X O X X 2.3 V X O O X 2.4 V O X X X 2.5 V O X O X 2.6 V O O X X 2.7 V O O O X 2.8 V[...]

  • Page 42

    Quick Installation Guide 40 III. Top Performance Test Setting: Users have to modify the value for each item in chipset features as follow: Chipset features setup ROM PCI / ISA BIOS CHIPSET FEATURES SETUP AWARD SOFTWARE, INC. : Select Item ESC F1 F5 F7 : Load Setup Defaults : Quit : Help : Old V alues PU/PD/+/- (Shift)F2 : Modify : Color : Enabled :[...]

  • Page 43

    Table of Contents 40 TABLE OF CONTENTS 1. INTRODUCTION ............................................................................... 1- 1 1.1. PREFACE .................................................................................. 1- 1 1.2. KEY FEATURES ........................................................................ 1- 1 1.3. PERFORMA[...]

  • Page 44

    586SG 41 3.10. TURBO SWITCH CONNECTOR INSTALLATION ..................... 3- 10 3.11. TURBO LED CONNECTOR INSTALLATION ............................ 3- 10 3.12. HARDWARE RESET SWITCH CONNECTOR INSTALLATION 3- 10 3.13. GREEN FUNCTION INSTALLATION ........................................ 3- 10 3.14. PERIPHERAL DEVICE INSTALLATION ......................[...]

  • Page 45

    Introduction 1- 1 1. INTRODUCTION 1.1. PREFACE Welcome to use the 586SG motherboard. The motherboard is a Pipeline 512 KB CACHE Pentium  Processor based PC / AT compatible system with ISA bus and PCI Local Bus, and has been designed to be the fastest PC / AT system. There are some new features allow you to operate the system with the performance[...]

  • Page 46

    586SG 1- 2 q Licensed AWARD BIOS, FLASH RAM for BIOS update. q 22cm*25cm, AT Form factor. q Supports USB port & PS/2 Mouse port. q Supports 3 steps ACPI LED. 1.3. PERFORMANCE LIST The following list of performance data is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no respo[...]

  • Page 47

    Introduction 1- 3 1.4. BLOCK DIAGRAM CPU Tag RAM PBSRAM AGP DEVICE Host Address Host Data Bus ISA Bus PCI Bus PCI Device PCI Device PCI Device PCI Device MD Bus SiS 5595 Keyboard GPIO USB SiS 5591 SDRAM MA Bus IDE DEVICE BIOS ISA Device ISA Device PLL 52C64-05 PLL 52C64-09 Winbond I/O ComA ComB LPT FDD 66MHz 66MHz 66MHz 66MHz 33MHz 66MHz 33MHz 33MH[...]

  • Page 48

    586SG 1- 4 1.5. INTRODUCE THE PCI - BUS Connecting devices to a CPU local bus can dramatically increase the speed of I/O-bound peripherals with only a slight increase in cost over traditional systems. This price / Performance point has created a vast market potential for local bus products. The main barrier to this market has been the lack of an ac[...]

  • Page 49

    Introduction 1- 5 1.7. What is AGP ? The Accelerated Graphics Port (AGP) is a new port on the Host-To-PCI bridge device that supports an AGP port. The main purpose of the AGP port is to provide fast access to system memory. The AGP port can be used either as fast PCI port (32-bits at 66MHz vs. 32- bits at 33MHz) or as an AGP port which supports 2x [...]

  • Page 50

    [...]

  • Page 51

    586SG 2- 1 2. SPECIFICATION 2.1. HARDWARE • CPU − Pentium  Processor 90 - 233 MHz, MMX, P54CT, P54CTB, AMDK5(PR133 / PR166), AMD-K6 (166 / 180 / 200 (2.9V) / 233 (3.2V) ), Cyrix / IBM 6 x 86 ( PR150+ / PR166+ / PR200+), Cyrix / IBM 6x86L (PR150+/ PR166+/ PR200+( 2.8V)), Cyrix / IBM 6x86MX (PR166 (60x2.5 2.9V) / PR200 (66x2.5 2.9V) (75x2 2.9V[...]

  • Page 52

    Specification 2- 2 • IDE PORTS − 2-channel Ultra DMA/33 Enhanced IDE port on board.(Using IRQ14,15) − Supports Mode 3,4 IDE & ATAPI CD - ROM. • I/O PORTS − Supports 2 x16550 COM ports. (Using IRQ4, 3) − Supports 1 x EPP/ECP LPT port. (Using IRQ7 or 5 and DMA3 or 1) − Supports 1 x 1.44/2.88 MB Floppy port. (Using DMA2 & IRQ6) ?[...]

  • Page 53

    586SG 3- 1 3. HARDWARE INSTALLATION 3.1. UNPACKING The mainboard package should contain the following: • The 586SG mainboard. • USER ’ S MANUAL for mainboard. • Cable set for IDE ¡ B Floppy & I/O Port . • Diskette for Driver. The mainboard contains sensitive electric components which can be easily damaged by static electricity, so th[...]

  • Page 54

    Hardware Installation 3- 2 3.2. MAINBOARD LAYOUT BIOS 586SG KB J2 1 CPU CN2 IDE2 PSL3 1 PSL2 1 PSL1 1 PSL4 1 CN1 IDE1 1 1 DIMM2 U8 1 SLOT3 SLOT1 SLOT2 SLOT4 J4 1 1 1 CN3 1 1 1 1 1 J3 CN4 AGP1 DIMM1 JP3 USB FLOPPY LPT SIMM4 SIMM3 SIMM2 SIMM1 BANK1 BANK0 U1 U9 1 2 3 JP4 JP5 JP6 1 SW + + + JP15 JP2 PWR J1 U1 8 5 4 1 1 1 × Figure 3.1 Ø 3.3. QUICK REF[...]

  • Page 55

    586SG 3- 3 t PWR : ACPI LED /Key-Lock Connector Pin No. Function 1 LED anode (+). 2 NC. 3 LED cathode (-). 4 Key Lock 5 GND t J4 : USB Port Pin No. Function 1 VCC. 2 SBD0-. 3 SBD0+. 4 GND. 5 VCC. 6 SBD1-. 7 SBD1+. 8 GND. t JP2: Keyboard Power-on Connector Pin No. Function Close Keyboard Power-on enabled Open Keyboard Power-on disabled t JP3: CPU Co[...]

  • Page 56

    Hardware Installation 3- 4 t SW: CPU INT./ EXT. FREQ. RATIO X OFF SW 4 5 6 7 O ON AUTO X X X O 2.0 V X X X X 2.1 V X X O X 2.2 V X O X X 2.3 V X O O X 2.4 V O X X X SW 2 3 8 2.5 V O X O X x 1.5 X X X 2.6 V O O X X x 2 O X X 2.7 V O O O X x 2.5 O O X 2.8 V X X X O x 3 X O X 2.9 V X X O O x 3.5 X X X 3.0 V X O X O x 4 O X O 3.1 V X O O O x 4.5 O O O [...]

  • Page 57

    586SG 3- 5 The total memory size is 8 - 768 MB. For the DRAM installation position, please refer to Figure 3.1. Note that the Pin 1 of SIMM module must match with the Pin 1 of SIMM socket when the DRAM SIMM module is installed. Insert the DRAM SIMM module into the SIMM socket at 45 degree angle. If there is a wrong direction of Pin 1, the DRAM SIMM[...]

  • Page 58

    Hardware Installation 3- 6 Bank0 Bank1 DIMM1 DIMM2 TOTAL 4MB * 2pcs. 16MB 16MB 40MB 8MB * 2pcs. 8MB 16MB 40MB 8MB 32MB 40MB 16MB * 2pcs. 8MB 40MB 16MB 32MB 48MB 4MB * 2pcs. 8MB 32MB 48MB 8MB * 2pcs. 16MB * 2pcs. 48MB 8MB * 2pcs. 16MB 16MB 48MB 16MB * 2pcs. 8MB * 2pcs. 48MB 16MB * 2pcs. 8MB 8MB 48MB 8MB * 2pcs. 32MB 48MB 16MB * 2pcs. 16MB 48MB 4MB *[...]

  • Page 59

    586SG 3- 7 Bank0 Bank1 DIMM1 DIMM2 TOTAL 8MB * 2pcs. 32MB 32MB 80MB 16MB * 2pcs. 16MB 32MB 80MB 32MB * 2pcs. 8MB * 2pcs. 80MB 32MB * 2pcs. 8MB 8MB 80MB 32MB * 2pcs. 16MB 80MB 32MB * 2pcs. 8MB 16MB 88MB 32MB 64MB 96MB 16MB * 2pcs. 32MB * 2pcs. 96MB 16MB * 2pcs. 32MB 32MB 96MB 32MB * 2pcs. 16MB 16MB 96MB 32MB * 2pcs. 16MB * 2pcs. 96MB 32MB * 2pcs. 32[...]

  • Page 60

    Hardware Installation 3- 8 Bank0 Bank1 DIMM1 DIMM2 TOTAL 64MB * 2pcs. 32MB 32MB 192MB 64MB * 2pcs. 64MB 8MB 200MB 64MB * 2pcs. 64MB 16MB 208MB 64MB * 2pcs. 64MB 32MB 224MB 64MB * 2pcs. 64MB * 2pcs. 256MB 64MB * 2pcs. 64MB 64MB 256MB 128MB * 2pcs. 8MB * 2pcs. 272MB 128MB * 2pcs. 8MB 8MB 272MB 128MB * 2pcs. 8MB 16MB 280MB 128MB * 2pcs. 16MB * 2pcs. 2[...]

  • Page 61

    586SG 3- 9 3.6. CPU INSTALLATION AND JUMPERS SETUP The system speed depends on the frequency of CLOCK GENERATOR. The user can change SW selection to set up the system speed to 60 or 66 or 75 or 83 MHz for 3.3V/2.5V Pentium  Processor (90-233 MHz) / AMDK5(PR133 / PR166) / AMD-K6(166/180/200(2.9V)/233(3.2V)), Cyrix / IBM 6x86 (PR150+ / PR166+/ PR2[...]

  • Page 62

    Hardware Installation 3- 10 3.9. ACPI LED & KEY LOCK CONNECTOR INSTALLATION This mainboard uses the existing power LED as ACPI LED .The ACPI LED will light on when system is power-on .The ACPI LED is off when the system is power-off. The ACPI LED will blink when system is in Green mode .This connector should be installed to ACPI LED jumper of t[...]

  • Page 63

    586SG 4- 1 4. BIOS CONFIGURATION Award's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. There're RTC & CMOS SRAM on board; they have a power supply from external battery to keep the DATA inviolate & effective. The RTC is a REAL- TIME CLOCK device, which provides the DATE & TIM[...]

  • Page 64

    BIOS Configuration 4- 2 4.2. CONTROL KEYS Up arrow Move to previous item. Down arrow Move to next item. Left arrow Move to the item in the left hand. Right arrow Move to the item in the right hand. Esc key Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu. P[...]

  • Page 65

    586SG 4- 3 4.3. GETTING HELP 4.3.1. Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. 4.3.2. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the H[...]

  • Page 66

    BIOS Configuration 4- 4 • Standard CMOS setup This setup page includes all the items in a standard compatible BIOS. • BIOS features setup This setup page includes all the items of Award special enhanced features. • Chipset features setup This setup page includes all th e items of chipset special features. • Power management setup This setup[...]

  • Page 67

    586SG 4- 5 4.5. STANDARD CMOS SETUP MENU The items in Standard CMOS Setup Menu (Figure 4.2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the < PgUp> or < PgDn> keys to select the value you want in each item. ROM PCI / ISA BIOS STANDARD CMOS [...]

  • Page 68

    BIOS Configuration 4- 6 • Date The date format is <day>, <date> <month> <year>. Press <F3> to show the calendar. Day The day, from Sun to Sat, determined by the BIOS and is display-only Date The date, from 1 to 31 (or the maximum allowed in the month) Month The month, Jan. through Dec. Year The year, from 1994 throug[...]

  • Page 69

    586SG 4- 7 CYLS. number of cylinders HEADS number of heads PRECOMP write precomp LANDZONE landing zone SECTORS number of sectors If a hard disk has not been installed select NONE and press <Enter>. • Drive A type / Drive B type The category identify the types of floppy disk drive A or drive B that has been installed in the computer. None No[...]

  • Page 70

    BIOS Configuration 4- 8 • Video The category detects the type of adapter used for the primary system monitor that must match your video display card and monitor. Although secondary monitors are supported, you do not have to select the type in setup. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SVGA, or PGA monitor adapter[...]

  • Page 71

    586SG 4- 9 Base Memory The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system. The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard. Extended Memory The BIOS determines h[...]

  • Page 72

    BIOS Configuration 4- 10 4.6. BIOS FEATURES SETUP ROM PCI / ISA BIOS BIOS FEATURES SETUP AWARD SOFTWARE, INC. : Select Item Virus Warning CPU Internal Cache External Cache Boot Sequence Boot Up Floppy Seek Boot Up NumLock Status Video BIOS Shadow C8000 - CBFFF Shadow : On : Enabled : Enabled : Enabled : Enabled : A, C, SCSI : Enabled : Disabled ESC[...]

  • Page 73

    586SG 4- 11 • CPU Internal Cache / External Cache These two categories speed up memory access. However, it depends on CPU / chipset design. The default value is Enabled. Enabled Enable cache function. Disabled Disable cache function. • Quick Power On Self Test This category speeds up Power On Self Test (POST) after you power on the computer. If[...]

  • Page 74

    BIOS Configuration 4- 12 F,A,SCSI System will first search for hard disk (F) drive then floppy disk drive and SCSI drive. SCSI,A,C System will first search for SCSI drive then floppy disk drive and hard disk (C) drive . SCSI,C,A System will first search for SCSI drive and hard disk (C) drive then floppy disk drive . C only System will only search f[...]

  • Page 75

    586SG 4- 13 • Memory Parity / ECC Check The default value is Disabled. Enabled Enable Memory Parity / ECC Check. Disabled Disable Memory Parity / ECC Check. • Typematic Rate Setting The default value is Disabled. Enabled Enable Keyboard Typematic rate setting. Disabled Disable Keyboard Typematic rate setting. • Typematic Rate (Chars / Sec) Th[...]

  • Page 76

    BIOS Configuration 4- 14 freely. • PCI/VGA Palette Snoo p The default value are Disabled. Enabled For having Video Card on ISA Bus and VGA Card on PCI Bus. Disabled For VGA Card only. • OS Select For DRAM>64MB The default value is Non-OS2. Non-OS2 Using non-OS2 operating system. OS2 Using OS2 operating system and DRAM>64MB. • Video BIOS[...]

  • Page 77

    586SG 4- 15 4.7. CHIPSET FEATURES SETUP ROM PCI / ISA BIOS CHIPSET FEATURES SETUP AWARD SOFTWARE, INC. : Select Item ESC F1 F5 F7 : Load Setup Defaults : Quit : Help : Old V alues PU/PD/+/- (Shift)F2 : Modify : Color : Disabled : 7T : 5T : 7.159MHz NA# Enable : 3T SDRAM CAS Latency : 5T : 4T F6 : Load BIOS Defaults CPU to PCI Post Write ISA Bus Clo[...]

  • Page 78

    BIOS Configuration 4- 16 • RAS Precharge Time The default value is 5T 2T Set RAS Precharge Time to 2T. 3T Set RAS Precharge Time to 3T. 4T Set RAS Precharge Time to 4T. 5T Set RAS Precharge Time to 5T. • RAS to CAS Delay The default value is 5T 2T Set RAS to CAS Delay to 2T. 3T Set RAS to CAS Delay to 3T. 4T Set RAS to CAS Delay to 4T. 5T Set R[...]

  • Page 79

    586SG 4- 17 Disabled Disabled NA#. • SDRAM CAS Late ncy The default value is 3T 2T Set SDRAM CAS Latency to 2T. 3T Set SDRAM CAS Latency to 3T. • SDRAM WR Retire Rate The default value is X-2-2-2 X-1-1-1 Set SDRAM WR Retire Rate to X-1-1-1. X-2-2-2 Set SDRAM WR Retire Rate to X-2-2-2. • SDRAM Wait State Control The default value is 1WS 0WS Se[...]

  • Page 80

    BIOS Configuration 4- 18 The default value is 2T. 1T CAS# Pulse Width (EDO ) 1T. 2T CAS# Pulse Width (EDO ) 2T. • CAS Precharge Time (FP) The default value is 2T 1T CAS Precharge Time (FP ) 1T. 2T CAS Precharge Time (FP ) 2T. 1T/2T CAS Precharge Time (FP ) 1T/2T. • CAS# Pulse Width for FP The default value is 2T 1T CAS# Pulse Width (FP ) 1T. 2T[...]

  • Page 81

    586SG 4- 19 Enabled Enabled CPU to PCI Burst Mem. WR. • MA Current Rating The default value is 8mA. 8mA Set MA Current Rating is 8mA. 16mA Set MA Current Rating is 16mA. • Linear Mode SRAM Support The default value is Disabled . Enabled Enable Linear Mode SRAM Support. Disabled Disable Linear Mode SRAM Support. • AGP Aperture Size The default[...]

  • Page 82

    BIOS Configuration 4- 20 Disabled Disable video BIOS cacheable. • Memory Hole at 15M-16M The default value is Disabled . Disabled Normal Setting. Enabled Set Address=15-16MB relocate to ISA BUS.[...]

  • Page 83

    586SG 4- 21 • Temperature Control The default value is Auto. Auto Monitors CPU Temp. automatically. 65 ° C / 149 ° F Monitor CPU Temp. at 65 ° C / 149 ° F, if Temp. > 65 ° C / 149 ° F will cause system stop for a few Secs .& slow down CPU speed. 70 ° C / 158 ° F Monitor CPU Temp. at 70 ° C / 158 ° F, if Temp. > 70 ° C / 158 ?[...]

  • Page 84

    BIOS Configuration 4- 22 4.8. POWER MANAGEMENT SETUP ROM PCI / ISA BIOS POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. ESC F1 F5 F6 F7 : Load Setup Defaults : Quit : Help : Old Values : Load BIOS Defaults PU/PD/+/- (Shift)F2 : Modify : Color Video Off Method Power Management : DPMS Supported : Enabled Power Supply Type : Auto ** PM Timers ** HDD Off A[...]

  • Page 85

    586SG 4- 23 • Video off Method The default value is DPMS Supported. V/H SYNC+Blank BIOS will turn off V/H-SYNC when gets into Green mode for Green monitor power saving. Blank Screen BIOS will only black monitor when gets into Green mode. DPMS Supported BIOS will use DPMS Standard to control VGA card. (The Green type VGA card will turn off V/H- SY[...]

  • Page 86

    BIOS Configuration 4- 24 • Standby Mode The default value is Disable. Disable Disable Standby Mode. 10 sec-4 hours Setup the timer to enter Standby Mode. • Suspend Mode The default value is Disable. Disable Disable Suspend Mode. 10 sec-4 hours Setup the timer to enter Suspend Mode. • HDD Ports Activity The default value is Disabled. Disabled [...]

  • Page 87

    586SG 4- 25 • IRQ [3-7,9,A ,B,D,E,F] , NMI The default value is Disabled. Disabled Disable this function. Enabled Enable monitor IRQ [3-7, 9,A ,B,D,E,F],NMI for Green event. • CPUFan Off In Susp . The default value is Enabled. Disabled Disable this function. Enabled Stop CPU FAN when entering Suspend mode. • Power Supply Type The default valu[...]

  • Page 88

    BIOS Configuration 4- 26 4.9. PNP/PCI CONFIGURATION ROM PCI / ISA BIOS PNP/PCI CONFIGURATION AWARD SOFTWARE, INC. : Select Item ESC F1 F5 F7 : Load Setup Defaults : Quit : Help : Old Values PU/PD/+/- (Shift)F2 : Modify : Color IRQ- 3 assigned to : Legacy ISA IRQ- 4 assigned to IRQ- 5 assigned to IRQ- 7 assigned to IRQ- 9 assigned to IRQ- 10 assigne[...]

  • Page 89

    586SG 4- 27 • IRQ (3,4,5,7,9,10,11,12 ,14,15), DMA(0,1,3,5,6,7) assigned to The default value is "Legacy ISA" or "PCI/ISA PnP". Legacy ISA The resource is used by Legacy ISA device. PCI/ISA PnP The resource is used by PCI/ISA PnP device (PCI or ISA). • PCI ID E IRQ Map To PCI-AUTO Map PCI IDE IRQ to PCI slot automatically. I[...]

  • Page 90

    BIOS Configuration 4- 28 4.10. LOAD BIOS DEFAULTS SAVE & EXIT SETUP LOAD BIOS DEFAULTS ROM PCI / ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP PNP/PCI CONFIGURATION LOAD SETUP DEFAULTS USER PASSWORD EXIT WITHOUT S A VING ESC F10 : Quit : Save & Exit Setup (Shift)F2 : Select I[...]

  • Page 91

    586SG 4- 29 4.11. LOAD SETUP DEFAULTS SAVE & EXIT SETUP LOAD BIOS DEFAULTS ROM PCI / ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP PNP/PCI CONFIGURATION LOAD SETUP DEFAULTS USER PASSWORD EXIT WITHOUT S A VING ESC F10 : Quit : Save & Exit Setup (Shift)F2 : Select Item : Change[...]

  • Page 92

    BIOS Configuration 4- 30 4.12. INTEGRATED PERIPHERALS ROM PCI / ISA BIOS INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. : ECP/EPP Onboard Parallel Mode : 3 ECP Mode Use DMA * IDE Primary Master PIO Internal PCI/IDE : Both : Auto : Auto IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO : Auto : Auto IDE Burst Mode : Disabled : Disa[...]

  • Page 93

    586SG 4- 31 • IDE Primary Master PIO (for onboard IDE 1st channel). The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mode. Mode0~4 Manually set the IDE Accessing mode. • IDE Primary Slave PIO (for onboard IDE 1st channel). The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mo[...]

  • Page 94

    BIOS Configuration 4- 32 • Primary Slave UltraDMA (for onboard IDE 1st channel). The default value is Auto. Auto BIOS will automatically set the IDE HDD to Ultra DMA/33 Mode. Disabled Disable Ultra DMA HDD Function. • Secondary Master UltraDMA (for onboard IDE 2nd channel). The default value is Auto. Auto BIOS will automatically set the IDE HDD[...]

  • Page 95

    586SG 4- 33 • Onboard FDD Controller The default value is Enabled. Enabled Enable onboard FDD port. Disabled Disable onboard FDD port. • Onboard Serial Port 1 The default value is 3F8/IRQ4. Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. 2F8/IRQ3 Enable onboard Serial port 1 and a[...]

  • Page 96

    BIOS Configuration 4- 34 • Onboard Parallel Mode The default value is SPP. SPP Using Parallel port as Normal Printer Port. EPP/SPP Using Parallel port as Enhanced Parallel Port / Normal Printer Port. ECP Using Parallel port as Extended Capabilities Port. ECP/EPP Using Parallel port as Extended Capabilities Port mode/Enhanced Parallel Port. ¯ As [...]

  • Page 97

    586SG 4- 35 • Ring Power Up Control The default value is Enabled. Disabled Disable Modem Ring- on . Enabled Enable Modem Ring- on . • KB Power ON Password Enter Enter from 1 to 8 characters to set the K eyboard Password . • Power Up by Alarm The default value is Disabled. Disabled Disable this function. Enabled Enable alarm function to POWER [...]

  • Page 98

    BIOS Configuration 4- 36 4.13. SUPERVISOR / USER PASSWORD When you select this function, the following message will appear at the center of the screen to assist you in creating a password. ENTER PASSWORD ROM PCI / ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. SAVE & EXIT SETUP LOAD BIOS DEFAULTS STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSE[...]

  • Page 99

    586SG 4- 37 4.14. IDE HDD AUTO DETECTION ROM PCI / ISA BIOS AWARD SOFTWARE, INC. ESC CYLS. HEAD PRECOMP LANDZ SECTOR Select Primary Master Option ( N=Skip): N : Skip SIZE TYPE HARD DISKS MODE OPTIONS SIZE CYLS. HEAD PRECOMP LANDZ SECTOR MODE 1 (Y) 2 3 521 521 521 1060 530 530 16 32 32 65535 65535 0 1059 1059 1059 63 63 63 NORMAL LBA LARGE CMOS SETU[...]

  • Page 100

    BIOS Configuration 4- 38 4.15. SAVE & EXIT SETUP ROM PCI / ISA BIOS COMS SETUP UTILITY AWARD SOFTWARE, INC. Save Data to CMOS & Exit SETUP SAVE & EXIT SETUP LOAD BIOS DEFAULTS STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP PNP/PCI CONFIGURATION LOAD SETUP DEFAULTS USER PASSWORD EXIT WITHOUT S A VING ESC F10 : Quit : Save[...]

  • Page 101

    586SG 39 4.16. EXIT WITHOUT SAVING ROM PCI / ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. Abandon all Datas & Exit SETUP SAVE & EXIT SETUP LOAD BIOS DEFAULTS STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP PNP/PCI CONFIGURATION LOAD SETUP DEFAULTS USER PASSWORD EXIT WITHOUT S A VING ESC F10 : Quit : Save & Exit Setup [...]

  • Page 102

    [...]

  • Page 103

    FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, an[...]

  • Page 104

    [...]

  • Page 105

    part 12 sound and television signals CE marking (EC conformity marking) The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment electronic and related appara[...]