Gigabyte GA-73PVM-S2H manuel d'utilisation

GA-73PVM-S2H LGA775 socket motherboard for Intel ® Core TM processor family/ Intel ® Pentium ® processor family/Intel ® Celeron ® processor family User's Manual Rev. 1003 12ME-73PVMS2H-1003R[...]

Oct. 11, 2007 Motherboard GA-73PVM-S2H Motherboard GA-73PVM-S2H Oct. 11, 2007[...]

Copyright © 2007 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. The logo is exclusively licensed to GIGABYTE UNITED INC. by GIGA-BYTE TECHNOLOGY CO., L TD. GIGABYTE UNITED INC. is designated by GIGA-BYTE TECHNOLOGY CO., L TD as the exclu- sive global d[...]

- 4 - T able of Contents Box Contents ................................................................................................................. 6 Optional Items ................................................................................................................. 6 GA-73PVM-S2H Motherboard Layout .................................[...]

- 5 - Chapter 3 Drivers Installation ...................................................................................... 57 3 - 1 Installing Chipset Dr ivers ............................................................................... 5 7 3 - 2 Software Applications .............................................................................[...]

- 6 - • The box contents above are for reference only and the actual items shall depend on product package you obtain. The box contents are subject to change without notice. • The motherboard image is for reference only. Box Contents GA-73PVM-S2H motherboard Motherboard driver disk Motherboard driver disk (for Windows Vista) User's Manual [...]

- 7 - GA-73PVM-S2H Motherboard Layout KB_MS LGA775 ATX GA-73PVM-S2H USB LAN CD_IN F_AUDIO AUDIO BIOS PCIE_16 IT8718 IDE DDRII1 F1_1394 TSB43AB23 PCIE_1 PCI1 BATTERY CI CODEC ATX_12V ESATA 1394 USB HDMI CLR_CMOS RTL 8211B CPU_FAN SATAII0 OPTICAL PCI2 SYS_FAN LPT DVI VGA nVIDIA ® GeForce 7100/ nForce 630i DDRII2 SATAII2 SATAII1 F_PANEL COMA SPDIF_IO[...]

- 8 - Block Diagram (Note) Simultaneous output for DVI-D and HDMI is not supported. LGA775 Processor 4 SA T A 3Gb/s LPC BUS 10 USB Ports Line-Out MIC CODEC Line-In SPDIF In SPDIF Out Side Speaker Out Center/Subwoofer Speaker Out Surround Speaker Out 2 PCI PCI Bus 2 IEEE 1394a TSB43AB23 LPT Port BIOS Floppy COM Port PS/2 KB/Mouse IT8718 Host Interfa[...]

Hardware Installation - 9 - 1 - 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, do not remove or break mo[...]

GA-73PVM-S2H Motherboard - 1 0 - 1 - 2 Product Specifications CPU  Support for an Intel ® Core TM 2 Extreme processor/ Intel ® Core TM 2 Quad processor/Intel ® Core TM 2 Duo processor/ Intel ® Pentium ® processor Extreme Edition/Intel ® Pentium ® D processor/ Intel ® Pentium ® 4 processor Extreme Edition/Intel ® Pentium ® 4 processor/[...]

Hardware Installation - 11 - Internal Connectors  1 x 24-pin A TX main power connector  1 x 4-pin A TX 12V power connector  1 x floppy disk drive connector  1 x IDE connector  3 x SA T A 3Gb/s connectors  1 x CPU fan header  1 x system fan header  1 x front panel header  1 x front panel audio header  1 x CD In connecto[...]

GA-73PVM-S2H Motherboard - 1 2 - Unique Features  Support for @BIOS  Support for Download Center  Support for Q-Flash  Support for EasyTune (Note 2)  Support for Xpress Install  Support for Xpress Recovery2  Support for Virtual Dual BIOS Bundled Software  Norton Internet Security (OEM version) Operating System  Support fo[...]

Hardware Installation - 13 - 1 -3 Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installin[...]

GA-73PVM-S2H Motherboard - 1 4 - B . Follow the steps below to correctly install the CPU into the motherboard CPU socket. Step 2: Lift the metal load plate from the CPU socket. (DO NOT touch socket contacts.) Step 4: Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one corner of the CPU socket (o[...]

Hardware Installation - 15 - 1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler.) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU. Step 3: Place the cooler atop the CPU, ali[...]

GA-73PVM-S2H Motherboard - 1 6 - 1 -4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest memory support list.) • Always [...]

Hardware Installation - 17 - 1- 5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always turn off the computer and unplug the power cord from the power outlet before i[...]

GA-73PVM-S2H Motherboard - 1 8 - PCI Express x16 Graphics Card Support List The items below are supported under Windows XP operating system only. When using an add-on graphics card, please first delete the onboard graphics driver before installing the driver for the add-on graphics card. For more information, please go to GIGABYTE's website. ([...]

Hardware Installation - 19 - Graphics Chip Maker Model Name A Ti GIGABYTE GV-RX30HM128D GIGABYTE GV-RX60X128V GIGABYTE GV-RX70P128D GIGABYTE GV-RX80256D GIGABYTE GV-RX55128D GIGABYTE GV-RX85T256V-B GIGABYTE GV-RX13P256D-RH GIGABYTE GV-RX18L256V-B GIGABYTE GV-RX18T512V-B GIGABYTE GV-RC19T512B-RH GIGABYTE GV-RX165T256D-RH GIGABYTE GV-RX13128D-RH GIGA[...]

GA-73PVM-S2H Motherboard - 2 0 - 1 - 6 Back Panel Connectors • After installing the HDMI device, make sure the default device for sound playback is the HDMI device. (The item name may differ by operating system. Refer the figures below for details.) • Please note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM formats. (AC3 and [...]

Hardware Installation - 21 - Center/Subwoofer Speaker Out Jack (Orange) Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration. Rear Speaker Out Jack (Black) Use this audio jack to connect rear speakers in a 4/5.1/7.1-channel audio configuration. Side Speaker Out Jack (Gray) Use this audio jack to connect [...]

GA-73PVM-S2H Motherboard - 2 2 - A. Dual Display Configurations: This motherboard provides three ports for video output: DVI-D, HDMI and D-Sub. The table below shows the supported dual display configurations. Dual Display Combination Supported or Not DVI-D + D-Sub Y e s DVI-D + HDMI N o HDMI + D-Sub Y e s In addition to the default speakers setting[...]

Hardware Installation - 23 - 1 - 7 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent [...]

GA-73PVM-S2H Motherboard - 2 4 - 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly [...]

Hardware Installation - 25 - • Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may result in damage to the CPU or the system may hang. • These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers. 3/4) CPU_F AN/SYS_F AN (Fan Headers) The motherboa[...]

GA-73PVM-S2H Motherboard - 2 6 - 6 ) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember to set the jumpers and the cabling according to the role of the IDE devices ([...]

Hardware Installation - 27 - 8 ) PWR_LED (System Power LED Header) This header can be used to connect a system power LED on the chassis to indicate system power status. The LED is on when the system is operating. The LED keeps blinking when the system is in S1 sleep state. The LED is off when the system is in S3/S4 sleep state or powered off (S5). [...]

GA-73PVM-S2H Motherboard - 2 8 - 1 0 ) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker and system status indicator on the chassis front panel to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. 1 2 19 20 HD- HD+ RES+ RES- NC SPEAK- MSG- MSG+ PW- PW+ M[...]

Hardware Installation - 29 - 1 1 ) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel H igh Definition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorre[...]

GA-73PVM-S2H Motherboard - 3 0 - 1 3 ) SPDIF_IO (S/PDIF In/Out Header) This header supports digital S/PDIF in/out. Via an optional S/PDIF in and out cable, this header can connect to an audio device that supports digital audio out and an audio system that supports digital audio in. For purchasing the optional S/PDIF in and out cable, please contact[...]

Hardware Installation - 31 - 1 5) F1_1394 (IEEE 1394a Header, Gray) The header conforms to IEEE 1394a specification. Each IEEE 1394a header can provide one IEEE 1394a port via an optional IEEE 1394a bracket. For purchasing the optional IEEE 1394a bracket, please contact the local dealer. Pin No. Definition 1T P A + 2T P A - 3 GND 4 GND 5 TPB+ 6 TPB[...]

GA-73PVM-S2H Motherboard - 3 2 - 1 7 ) LPT (Parallel Port Header) The LPT header can provide one parallel port via an optional LPT port cable. For purchasing the optional LPT port cable, please contact the local dealer. Pin No. Definition 1 STB- 2 AFD- 3 PD0 4 ERR- 5 PD1 6 INIT- 7 PD2 8 SLIN- 9 PD3 10 GND 1 1 PD4 12 GND 13 PD5 Pin No. Definition 14[...]

Hardware Installation - 33 - Open: Normal Short: Clear CMOS V alues 1 9 ) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. T o clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a met[...]

GA-73PVM-S2H Motherboard - 3 4 -[...]

- 35 - BIOS Setup Chapter 2 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows [...]

GA-73PVM-S2H Motherboard - 3 6 - 2 - 1 Startup Screen The following screen may appear when the computer boots. Function Keys: <DEL> : BIOS Setup/Q-Flash Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup. <F9> : Xpress Recovery2 If you have ever entered Xpress Recovery2 to back up hard drive [...]

- 37 - BIOS Setup 2 -2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. (Sample BIOS V ersion: F4a) Main Menu Help The onscreen description of a highlighted setup option is displayed on the bottom l[...]

GA-73PVM-S2H Motherboard - 3 8 -      Standard CMOS Features Use this menu to configure the system time and date, hard drive types, floppy disk drive types, and the type of errors that stop the system boot, etc.      Advanced BIOS Features Use this menu to configure the device boot order, advanced features available on[...]

- 39 - BIOS Setup 2 - 3 Standard CMOS Features Date Sets the system date. The date format is week (read-only), month, date and year. Select the desired field and use the up arrow or down arrow key to set the date. Time Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the tim[...]

GA-73PVM-S2H Motherboard - 4 0 - The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive. Cylinder Number of cylinders. Head Number of heads. Precomp Write precompensation cylinder. Landi[...]

- 41 - BIOS Setup 2 - 4 Advanced BIOS Features Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or <PageDown>) to move it up or down on the list. P[...]

GA-73PVM-S2H Motherboard - 4 2 - Limit CPUID Max. to 3 (Note) Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.0. (Default: Disabled) No-Execute Memory Protect (Note) Enables or disables Intel ® Execute D[...]

- 43 - BIOS Setup 2 - 5 Integrated Peripherals SA T A-II RAID Config CMOS Setup Utility-Copyright (C) 1984-2007 A ward Software SA T A-II RAID Config Item Help Menu Level `` Onchip SA TA Mode [IDE] x SA T A-II Pri-Master RAID Enabled x SA T A-II Pri-Slave RAID Enabled x SA T A-II Sec-Ma ster RAID Enabled x SA T A-II Sec-Slave RAID Enabled KLJI : Mo[...]

GA-73PVM-S2H Motherboard - 4 4 - Onchip SA T A Mode Enables or disables RAID for the SA TA controller integrated in the nVIDIA ® GeForce 710 0/nForce 630i chipset or configures the SA TA controller to AHCI mode. I DE Disables RAID for the SA T A controller and configures the SA T A controller to P A T A mode. (Default) AHCI Configures the SA T A c[...]

- 45 - BIOS Setup SMART LAN (LAN Cable Diagnostic Function) CMOS Setup Utility-Copyright (C) 1984-2007 A ward Software SMART LAN Item Help Menu Level `` Start detecting at Port..... Pair1-2 Status = Open / Length = 0.0m Pair3-6 Status = Open / Length = 0.0m Pair4-5 Status = Open / Length = 0.0m Pair7-8 Status = Open / Length = 0.0m KLJI : Move Ente[...]

GA-73PVM-S2H Motherboard - 4 6 - Legacy USB storage detect Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during the POST. (Default: Enabled) Onboard Serial Port 1 Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (d[...]

- 47 - BIOS Setup 2 - 6 Power Management Setup ACPI Suspend T ype Specifies the ACPI sleep state when the system enters suspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state (default). I n S1 sleep state, the system appears suspended and stays in a low power mode. The system can be resumed at any time. S3(STR) Enab[...]

GA-73PVM-S2H Motherboard - 4 8 - Power-On by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Day of Month Alarm : Turn on the system at a specific time on each day or on a specific day in a month. Time (hh: mm: ss) Alarm : Set the time at which the system will be[...]

- 49 - BIOS Setup 2 -7 PnP/PCI Configurations PCI 1 IRQ Assignment Auto BIOS auto-assigns IRQ to the first PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,12,14,15 to the first PCI slot. PCI 2 IRQ Assignment Auto BIOS auto-assigns IRQ to the second PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1[...]

GA-73PVM-S2H Motherboard - 5 0 - 2 - 8 PC Health Status Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled) Case Opened Displays the detection status of the chassis i[...]

- 51 - BIOS Setup CPU Smart F AN Control Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. Y ou can adjust the fan speed with EasyTune based on system requirements. If disabled, CPU fan runs at full speed. (Default: Enabled) CPU Smart F AN Mode Specifies ho[...]

GA-73PVM-S2H Motherboard - 5 2 - 2 -9 MB Intelligent T weaker(M.I.T .) CMOS Setup Utility-Copyright (C) 1984-2007 A ward Software MB Intelligent T weaker(M.I.T .) ` FSB & Memory Config [Press Enter] Robust Graphics Booster [Auto] CPU Clock Ratio ( µù ) [10X] Normal CPU Vcore 1.32500V KLJI : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: [...]

- 53 - BIOS Setup Parameters/ Setting/ Current V alue Displays the following CPU and memory speed. Setting shows the value you manually adjust; Current Value shows the current operating frequency. Current CPU Freq, MHz Displays the CPU speeds. FSB-Memory Clock Mode Auto BIOS will automatically set the FSB-Memory clock mode. (Default) Linked Allows [...]

GA-73PVM-S2H Motherboard - 5 4 - 2-10 Load Fail-Safe Defaults Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. 2 - 1 1 Load Optimized Defaults P[...]

- 55 - BIOS Setup 2-12 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2007 A ward Software ` Sta ndard CMOS Features ` Adva nced BIOS Features ` Integrated Peripherals ` Power Ma nagement Setup ` PnP/PCI Configurations ` PC Health Status ` MB Intelligent T weaker(M.I.T .) Esc: Quit KLJI : Select Item F8: Q-Flash F10: Save & [...]

GA-73PVM-S2H Motherboard - 5 6 - 2-13 Save & Exit Setup 2-14 Exit Without Saving Press <Enter> on this item and press the <Y> key. This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu. Press <Enter> on this item and press the <Y> key. Th[...]

Drivers Installation - 57 - Chapter 3 Drivers Installation 3 - 1 Installing Chipset Drivers • Before installing the drivers, first install the operating system. (The following instructions use Windows XP as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optional drive. The dr[...]

GA-73PVM-S2H Motherboard - 5 8 - 3 -2 Software Applications This page displays all the tools and applications that GIGABYTE develops and some free software. Y ou may press the Install button following an item to install it. 3 - 3 Driver CD Information This page provides information about the drivers, applications and tools in this driver disk.[...]

Drivers Installation - 59 - 3 -4 Hardware Information This page provides information about the hardware devices on this motherboard. 3- 5 Contact Us Check the contacts information of the GIGABYTE headquarter in T aiwan and the overseas branch offices on the last page of this manual.[...]

GA-73PVM-S2H Motherboard - 6 0 -[...]

Unique Features - 61 - 4 -1 Xpress Recovery2 "*" Xpress Recovery2 checks the first physical hard drive in the following sequence: The first P A T A IDE connector , the second P AT A IDE connector, the first SA T A connector, the second SA T A connector and so forth. For example, when hard drives are attached to the first IDE and the first[...]

GA-73PVM-S2H Motherboard - 6 2 - Installation and Configuration (The following procedure uses Windows XP as the example operating system.) A. Installing Windows XP and Partitioning the Hard Drive 1 . Set CD-ROM drive as the first boot device under "Advanced BIOS Features" in the BIOS Setup program. Save the changes and exit. 2. When parti[...]

Unique Features - 63 - 4. After the operating system is installed, right-click the My Computer icon on your desktop and select Manage (Figure 4). Go to Computer Management to check disk allocation. Xpress Recovery2 will save the backup file to the unallocated space (black stripe along the top)(Figure 5). Please note that if there is no enough unall[...]

GA-73PVM-S2H Motherboard - 6 4 - 2 . After you use the backup function in Xpress Recovery2 for the first time, Xpress Recovery2 will stay permanent in your hard drive. If you wish to enter Xpress Recovery2 later, simply press <F9> during the POST (Figure 9). Figure 8 Figure 9 B. Accessing Xpress Recovery2 1 . Boot from the motherboard driver [...]

Unique Features - 65 - D. Using the Restore Function in Xpress Recovery2 Select RESTORE to restore the backup to your hard drive in case the system breaks down. The RESTORE option will not be present if no backup is created before (Figure 13, 14). Figure 13 Figure 14 E. Removing the Backup 1 . If you wish to remove the backup file, select REMOVE (F[...]

GA-73PVM-S2H Motherboard - 6 6 - 4 - 2 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash TM and @BIOS TM . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS- DOS mode. What is Q-Flash TM ? With Q-Flash you can update the system BIOS without having to ente[...]

Unique Features - 67 - B. Updating the BIOS When updating the BIOS, choose the location where the BIOS file is saved. The follow procedure assumes that you save the BIOS file to a floppy disk. Step 1: 1. Insert the floppy disk containing the BIOS file into the floppy disk drive. In the main menu of Q-Flash, use the up or down arrow key to select Up[...]

GA-73PVM-S2H Motherboard - 6 8 - Step 6: Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts. Press <Y> to load BIOS defaults Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you shoul[...]

Unique Features - 69 - B. Installing and Using @BIOS: Use the motherboard driver disk included with the motherboard to install @BIOS. 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin: 1 . In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BI[...]

GA-73PVM-S2H Motherboard - 7 0 - Step 3: First make sure the model name on the screen is correct, then click OK . Upon completion, restart your system. • If more than one model is present when doing Step 3 above, recomfirm your motherboard model. Updating the BIOS with an incorrect BIOS file could result in an unbootable system. • If the BIOS u[...]

Unique Features - 71 - 4 - 3 EasyT une 5 EasyTune TM 5, an easy-to-use and convenient system overclocking and management tool, lets you do overclock and overvoltage in Windows environment, eliminating the need to enter the BIOS Setup program. EasyTune 5 provides the following functions (Note 1) : overclocking/overvoltage, C.I.A./ M.I.B. (Note 2) , [...]

GA-73PVM-S2H Motherboard - 7 2 - 4 -4 Windows Vista ReadyBoost Windows ReadyBoost allows you to use flash memory on a Windows Vista certified USB flash drive to boost your computer's performance. Y ou may enable ReadyBoost and allocate part of your USB flash drive's memory to speed up your computer. Follow the steps below to enable the Re[...]

Appendix - 73 - Chapter 5 Appendix (Note 1) Skip this step if you do not want to create RAID array on the SA T A controller. (Note 2) Required when the SA TA controller is set to AHCI or RAID mode. 5 - 1 Configuring SA T A Hard Drive(s) T o configure SAT A hard drive(s), follow the steps below: A . Install SAT A hard drive(s) in your computer . B .[...]

GA-73PVM-S2H Motherboard - 7 4 - B. Configuring SAT A controller mode in BIOS Setup Make sure to configure the SAT A controller mode correctly in system BIOS Setup. Step 1: Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-T est). Under Integrated Peripherals , ensure NV Serial-A T A Controller is ena[...]

Appendix - 75 - C. Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. For a non-RAID configuration, please skip this step and proceed to the installation of Windows operating system. Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "[...]

GA-73PVM-S2H Motherboard - 7 6 - Step 6: After assigning the RAID drives, press <F7>. A message which says "All data on new(or added) disks will be overwritten. Continue?" appears (Figure 6). T o overwrite the data in the selected hard drives, press <Y> to confirm or press <N> to cancel. (If the hard drives contain a pre[...]

Appendix - 77 - T o read more information about the RAID array , press <Enter> to enter the Array Detail screen (Figure 8), which shows various information about the array, including the RAID mode, stripe block size, hard drive model name, and hard drive capacity, etc. Figure 8 Figure 7 After that, the Array List screen appears, displaying th[...]

GA-73PVM-S2H Motherboard - 7 8 - 5-1-2 Making a SA T A RAID/AHCI Driver Diskette (Required for AHCI and RAID Mode) T o successfully install operating system onto SA T A hard drive(s) that is/are configured to RAID/AHCI mode, you need to install the SA TA controller driver during the OS installation. Without the driver, the hard drive may not be rec[...]

Appendix - 79 - Figure 1 Figure 2 Step 2: When a screen similar to that below appears, insert the floppy disk containing the SA T A RAID/AHCI driver and press <S> (Figure 2). Windows Setup Press F6 if you need to install a third party SCSI or RAID driver. Windows Setup S=Specify Additional Device ENTER=Continue F3=Exit Setup could not determi[...]

GA-73PVM-S2H Motherboard - 8 0 - If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SA T A RAID driver again from the motherboard driver disk. Figure 3 Windows Setup ENTER=Select F3=Exit Y ou have chosen to configure a SCSI Adapter for use with W indows, using a device support disk prov[...]

Appendix - 81 - Step 4: After the SA T A controller driver installation is completed, you can proceed with the W indows XP installation. Figure 6 WindowsXP Professional Setup Enter= Continue R=Repair F3=Exit W elcome to Setup. This port of the Setup program prepares Microsoft(R) Windows (R) XP to run on your computer. T o set up W indows XP now , p[...]

GA-73PVM-S2H Motherboard - 8 2 - B. Installing Windows Vista (Note) (The procedure below assumes that only one RAID array exists in your system.) Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID hard drive(s) will not be detected at th[...]

Appendix - 83 - Step 4: After the driver is loaded, the screen will show the RAID hard drive. Select the RAID hard drive onto which you want to install the operating system and then press Next to continue the OS installation (Figure 10). Figure 9 Figure 10 Step 3: When a screen as shown in Figure 9 appears, select NVIDIA nForce RAID Controller and [...]

GA-73PVM-S2H Motherboard - 8 4 - Rear Speaker Out Center/Subwoofer Speaker Out Side Speaker Out Line In Front Speaker Out Mic In 5 -2 Configuring Audio Input and Output 5-2-1 Configuring 2/4/5.1/7.1-Channel Audio The motherboard provides six audio jacks on the back panel which support 2/4/5.1/7.1-channel audio. The picture to the right shows the de[...]

Appendix - 85 - Step 2: Click the Audio I/O tab. In the speaker list on the left, select 2CH Speaker , 4CH Speaker , 6CH Speaker , or 8CH Speaker according to the type of speaker configuration you wish to set up. Step 3: Everytime you connect an audio device to an audio jack, the Connected device box appears. Select the device according to the type[...]

GA-73PVM-S2H Motherboard - 8 6 - 5-2-2 Installing the S/PDIF In and Out Cable (Optional) The S/PDIF in and out cable provides S/PDIF in and S/PDIF out functionalities. Step 1: First, attach the connector at the end of the cable to the SPDIF_IO header on your motherboard. Step 2: Secure the metal bracket to the chassis back panel with a screw. S/PDI[...]

Appendix - 87 - Step 3: Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for transmitting the S/PDIF digital audio signals. S/PDIF Coaxial Cable S/PDIF Optical Cable B. Configuring S/PDIF out: Click the tool icon in the DIGIT AL section. In the S/PDIF In/Out Settings dialog box, select an out- put samplin[...]

GA-73PVM-S2H Motherboard - 8 8 - Step 3: Locate the V olume icon in your system tray and click it to open the volume control panel. 5-2-3 Configuring Microphone Recording Step 1: After installing the audio driver, the Audio Manager icon will appear in your system tray. Double-click the icon to access the Audio Control Panel. Step 2: Connect your mi[...]

Appendix - 89 - or Select Realtek HD Audio Input in the Mixer device list Recording Control (Note) If you cannot find the volume control options you need in Master V olume , go to the Options menu and then choose Properties . Select the volume con- trol options you wish to show and click OK to complete. Step 4: T o hear the sound being recorded dur[...]

GA-73PVM-S2H Motherboard - 9 0 - Step 6: T o raise the recording and playing sound for the microphone, go to Options in Master V olume and select Advanced Controls . Click the Advanced button under a volume control option (e.g. Front Green In, Front Pink In). In the Other Controls field, select the 1 Microphone Boost check box. 5-2-4 Using the Soun[...]

Appendix - 91 - 5 - 3 Troubleshooting 5-3-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the SupportMotherboardFAQ page on GIGABYTE's website. Q : In the BIOS Setup program, why are some BIOS options missing? A : Some advanced options are hidden in the BIOS Setup program. Press <Delete> to enter BIO[...]

GA-73PVM-S2H Motherboard - 9 2 - 5-3-2 Troubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. Turn off the power. Remove all peripherals, connecting cables, and power cord etc. The problem is verified and solved. Ye s No A Check if the CPU cooler is attached to[...]

Appendix - 93 - If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the SupportT echnical Service Zone page to submit your question. Our customer service staff will reply you as soon as possible. No Ye s Check if there is display on your monitor. Ye s When the computer is turned [...]

GA-73PVM-S2H Motherboard - 9 4 - Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all re[...]

Appendix - 95 - Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With y[...]

GA-73PVM-S2H Motherboard - 9 6 -[...]

Appendix - 97 -[...]

GA-73PVM-S2H Motherboard - 9 8 -[...]

Appendix - 99 - Contact Us y y y y y GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4888 FAX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://www.gigabyte.tw [...]

GA-73PVM-S2H Motherboard - 100 - y y y y y G.B.T. TECHNOLOGY TRADING GMBH - Germany WEB address : http://www.gigabyte.de y y y y y G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www.giga-byte.co.uk y y y y y GIGA-BYTE TECHNOLOGY B.V. - The Netherlands WEB address : http://www.giga-byte.nl y y y y y GIGABYTE TECHNOLOGY FRANCE - France WEB addr[...]