Gigabyte GA-P55-USB3 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Gigabyte GA-P55-USB3. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Gigabyte GA-P55-USB3 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Gigabyte GA-P55-USB3 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Gigabyte GA-P55-USB3 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Gigabyte GA-P55-USB3
- nom du fabricant et année de fabrication Gigabyte GA-P55-USB3
- instructions d'utilisation, de réglage et d’entretien de l'équipement Gigabyte GA-P55-USB3
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Gigabyte GA-P55-USB3 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Gigabyte GA-P55-USB3 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Gigabyte en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Gigabyte GA-P55-USB3, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Gigabyte GA-P55-USB3, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Gigabyte GA-P55-USB3. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    GA-P55-USB3 LGA1 156 socket motherboard for Intel ® Core ™ i7 processor family/ Intel ® Core ™ i5 processor family/Intel ® Core ™ i3 processor family User's Manual Rev . 2001 12ME-P55USB3-2001R[...]

  • Page 2

    Motherboard GA-P55-USB3 Apr . 23, 2010 Apr. 23, 2010 Motherboard GA-P55-USB3[...]

  • Page 3

    Copyright © 2010 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE with[...]

  • Page 4

    - 4 - T able of Contents Box Contents ................................................................................................................... 6 Optional Items ................................................................................................................. 6 GA-P55-USB3 Motherboard Layout ................................[...]

  • Page 5

    - 5 - Chapter 3 Drivers Installation ........................................................................................ 61 3-1 Installing Chipset Drivers ............................................................................... 61 3-2 Application Software ..................................................................................[...]

  • Page 6

    - 6 - Box Contents GA-P55-USB3 motherboard Motherboard driver disk User's Manual Quick Installation Guide One IDE cable T wo SA T A cables I/O Shield Optional Items Floppy disk drive cable (Part No. 12CF1-1FD001-7*R) 2-port USB 2.0 bracket (Part No. 12CR1-1UB030-5*R) 2-port SA T A power cable (Part No. 12CF1-2SERPW-0*R) S/PDIF In cable (Part N[...]

  • Page 7

    - 7 - GA-P55-USB3 Motherboard Layout (Note) Due to a hardware limitation, the PCIEX1_1 slot can only accommodate a shorter PCI Express x1 expansion card. For a longer expansion card, use other expansion slots. CPU_F AN A TX_12V_2X4 A TX CD_IN F_AUDIO AUDIO B_BIOS PCIEX4_X1 PCIEX1_1 (Note) IDE SPDIF_I DDR3_1 DDR3_3 DDR3_2 DDR3_4 BA T Intel ® P55/H5[...]

  • Page 8

    - 8 - GA-P55-USB3 Motherboard Block Diagram j Only for P55 Chipset. k Only for H55 Chipset. PCIe CLK (100 MHz) x16 1 PCI Express x16 Center/Subwoofer Speaker Out Line Out MIC Line In S/PDIF In S/PDIF Out Side Speaker Out Surround Speaker Out CODEC PS/2 KB/Mouse LGA1 156 CPU DMI Interface 3 PCI PCI Bus PCI CLK (33 MHz) PCI Express Bus CPU CLK+/- (13[...]

  • Page 9

    - 9 - Hardware Installation 1- 1 Installation Pr ec autions Th e mot herb oar d con tain s nu mero us d elic ate ele ctr onic ci rcui ts a nd c ompo nent s wh ich c an become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prio r to ins tallation,[...]

  • Page 10

    Hardware Installation - 10 - 1- 2 Product Specications CPU  Support for an Intel ® Core ™ i7 series processor/Intel ® Core ™ i5 series processor/ Intel ® Core ™ i3 series processor in the LGA1 156 package (Go to GIGABYTE's website for the latest CPU support list.)  L3 cache varies with CPU Chipset  Intel ® P55/H55 Express[...]

  • Page 11

    - 1 1 - Hardware Installation USB  Chipset: - Up to 14 USB 2.0/1.1 ports (8 on the back panel, 6 via the USB brackets connected to the internal USB headers) j - Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) k  NEC D720200F1 chip: - Up to 2 USB 3.0/2.0 ports on the back panel Int[...]

  • Page 12

    Hardware Installation - 12 - (Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. (Note 2) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. (Note 3) When th[...]

  • Page 13

    - 13 - Hardware Installation 1-3 Installing the CPU and C PU Cooler 1-3 - 1 Inst alling t he CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the late[...]

  • Page 14

    Hardware Installation - 14 - Step 1: Gently press the CPU socket lever handle down and away from the socket with your nger . Then completely lift the CPU socket lever and the metal load plate will be lifted as well. Step 3: HoldtheCPUwithyourthumbandindexngers. Align the CPU pin one markin[...]

  • Page 15

    - 15 - Hardware Installation 1-3 -2 Inst alling t he CPU Coole r Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler .) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU. Male Push Pin Female Push Pin The T o[...]

  • Page 16

    Hardware Installation - 16 - 1- 4 - 1 D ual Channe l Memor y Co ngurat ion This motherbo ard pr ovides four DDR3 mem ory s ockets and supports Dual Channel T echno logy . After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory . En - abling Dual[...]

  • Page 17

    - 17 - Hardware Installation 1- 4 -2 In stallin g a Memo ry Notch DDR3 DIMM Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard[...]

  • Page 18

    Hardware Installation - 18 - 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always turn off the computer and unplug the power cord from the power outlet before in[...]

  • Page 19

    - 19 - Hardware Installation 1-6 Back Panel Connectors USB 2.0/1.1 Port  TheUSBport supportstheUSB2.0/1.1specication. UsethisportforUSB devicessuchasaUSB key - board/mouse,USBprinter ,USBashdriveandetc. PS/2 Keyboard or PS/2 Mouse Port Use this port to connect a PS/[...]

  • Page 20

    Hardware Installation - 20 - Center/Subwoofer Speaker Out Jack (Orange)  Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration. Rear Speaker Out Jack (Black)  Usethisaudiojacktoconnectrearspeakersina4/5.1/7.1-channelaudioconguration. Si[...]

  • Page 21

    - 21 - Hardware Installation 1- 7 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Bef ore inst alling th e d evices, be su re to tur n o f f t he devic es and yo ur compu ter . Un plug the power cord from the power[...]

  • Page 22

    Hardware Installation - 22 - DEBUG PO RT G.QBOFM A TX_12V_2X4: A TX_12V_2X4 5 8 1 4 DEBUG PO RT G.QBOFM 13 1 24 12 A TX A TX: PinNo. Denition 13 3.3V 14 -12V 15 GND 16 PS_ON (soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 23 +5V (Onl y for 2x12-pi n A TX) 24 GND (On ly fo r 2x 12-p in A TX) PinNo. Denition 1 3.3V 2 3.3V 3 [...]

  • Page 23

    - 23 - Hardware Installation 3/4/5) CPU_F AN/SYS_F AN1/SYS_F AN2/PWR_F AN (Fan Headers) The mother board has a 4-pi n CPU fan heade r (CPU _F AN), a 4-pin (SYS_F AN2) and a 3- pin ( SYS_ F AN1) system fan headers, and a 3-pin power fan header (PWR_F AN). Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to [...]

  • Page 24

    Hardware Installation - 24 - 7) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach- ing the IDE cable, locate the foolproof groove on the connector . If you wish to connect two IDE devices, remember to set the ju mpers and the cablin g acco rding to the role of the IDE devices [...]

  • Page 25

    - 25 - Hardware Installation 9) GSA T A2_6/7 (SA T A 3Gb/s Connectors, Controlled by GIGABYTE SA T A2) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector sup ports a single SA T A dev ice. The GIGAB YTE SA T A2 controller suppo rts RAID 0, RAID1,andJBOD. Refer[...]

  • Page 26

    Hardware Installation - 26 - 1 1) F_P ANEL (Front Panel Header) Conne ct the pow er switch , r eset swit ch, speake r , chass is intrus ion switc h/sensor and sy stem stat us indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables. • PW (Power Switch, Red): [...]

  • Page 27

    - 27 - Hardware Installation 12) F_AUDIO (Front Panel Audio Header)  ThefrontpanelaudioheadersupportsIn telHighDenitionaudio(HD)and AC'97audio.Y oumayconnect your chassis front panel audio module to this header . Make sure the wire assignments of the module con - nector match the pin ass[...]

  • Page 28

    Hardware Installation - 28 - 14) SPDIF_I (S/PDIF In Header) This header supports digital S/PDIF In and can connect to an audio device that supports digital audio out via an optional S/PDIF In cable. For purchasing the optional S/PDIF In cable, please contact the local dealer . PinNo. Denition 1 Power 2 SPDIFI 3 GND PinNo. Denition[...]

  • Page 29

    - 29 - Hardware Installation 16) F_USB1/F_USB2/F_UBS3 j (USB Headers)  Theheaders conformto USB2.0/1.1 specication.Each USBheader canprovidetwo USBports viaan optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . DEBUG PO RT G.QBOFM 10 9 2 1 PinNo[...]

  • Page 30

    Hardware Installation - 30 - 18) COMA (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the op- tional COM port cable, please contact the local dealer . 10 9 2 1 PinNo. Denition 1 NDCD- 2 NSIN 3 NSOUT 4 NDTR- 5 GND 6 NDSR- 7 NRTS- 8 NCTS- 9 NRI- 10 No Pin 19) CLR_CMOS (Clearing C[...]

  • Page 31

    - 31 - Hardware Installation 20) PHASE LED The numb er of li ghted L EDs ind icates the C PU load ing. The h igher t he CPU l oading , t he more the numberoflightedLEDs.T oenable thePhaseLEDdisplayfunction,please rstenableDynamicEnergy Saver ™ 2. Refer to Chapter 4, "Dynamic Energy Saver [...]

  • Page 32

    Hardware Installation - 32 -[...]

  • Page 33

    - 33 - BIOS Setup BIOS (B asic Input a nd Output Sy stem) record s ha rdware param eters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving s ystem paramete rs an d lo ading operating system, etc. BIO S in cludes a BIOS Setup pro gram that allows the?[...]

  • Page 34

    BIOS Setup - 34 - 2-1 Startup Screen The following screens may appear when the computer boots. A. The LOGO Screen (Default) B. The POST Screen Function Keys: <T AB>: POST SCREEN Press the <T ab> key to show the BIOS POST screen. T o show the BIOS POST screen at system start- up, refer to the instructions on the Full Screen LOGO Show ite[...]

  • Page 35

    - 35 - BIOS Setup 2-2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar- row keys to move among the items and press <Enter> to accept or enter a sub-menu. (Sample BIOS V ersion: F5f) Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom[...]

  • Page 36

    BIOS Setup - 36 -  The Functions of the <F1 1> and <F12> keys (For the Main Menu Only)  F1 1: Save CMOS to BIOS  This function allows you to save the current BIOS settings to a prole. Y ou can create up to 8 proles (Prole 1-8) and name each p[...]

  • Page 37

    - 37 - BIOS Setup 2-3 MB Intelligent T weaker(M.I.T .) Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in dam - age to CPU, chipset, or memory and reduce the useful life of the[...]

  • Page 38

    BIOS Setup - 38 - CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. CPU Frequency Displays the current operating CPU frequency . (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique f[...]

  • Page 39

    - 39 - BIOS Setup (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. C3/C6/C7 State Support (Note) Allows you to determine whether to let the CPU enter C3/C6/C7 mode in system halt state. When en- abled, the CPU core freque[...]

  • Page 40

    BIOS Setup - 40 - (Note) This item appears only if you install a memory module that supports this feature. BCLK Frequency(Mhz) Allows you to manually set the CPU base clock. The adjustable range is from 100 MHz to 600 MHz. This itemiscongurableonlyifthe Base Clock(BCLK) Control option is enabled. Important: Itishighly?[...]

  • Page 41

    - 41 - BIOS Setup CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Advanced Memory Settings higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V alues F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level   ExtremeMemoryProle(X.M.P .) (Note) [Disabled] System [...]

  • Page 42

    BIOS Setup - 42 - CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Channel A Timing Settings higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V alues F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level  >>>>> Channel A Standard Timing Control x CAS Late[...]

  • Page 43

    - 43 - BIOS Setup tRTP Options are: Auto (default), 1~15. tFAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc T iming Control B2B CAS Delay Options are: Auto (default), 1~31. Round T rip Latency Options are: Auto (default), 1~255.  Advanced V oltage Settings CMOS Setup[...]

  • Page 44

    BIOS Setup - 44 - >>> MCH/ICH PCH Core The default is Auto . CPU PLL The default is Auto . >>> DRAM DRAM V oltage The default is Auto . DRAM T ermination The default is Auto . Ch-A Data VRef. The default is Auto . Ch-B Data VRef. The default is Auto . Ch-A Address VRef. The default is Auto . Ch-B Address VRef. The default is Auto [...]

  • Page 45

    - 45 - BIOS Setup  Miscellaneous Settings CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Miscellaneous Settings Isochronous Support [Enabled] V irtualization T echnology (Note) [Enabled] higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V alues F6: Fail-Safe Defaults F7: Optimized Defaults [...]

  • Page 46

    BIOS Setup - 46 - Date (mm:dd:yy)  Setsthesystemdate.Thedateformatisweek(re ad-only),month,dateandyear .Selectthedesiredeld and use the up arrow or down arrow key to set the date. Time (hh:mm:ss)  Sets the system time. For example, 1 p.m. is 13:0:0. Select?[...]

  • Page 47

    - 47 - BIOS Setup • Auto Lets the BIOS aut omatically detect IDE/SA T A device s during the POST . (Default) • Manual  Allowsyoutomanuallyenterthespecicationsoftheharddrivewhenthehard drive access mode is set to CHS . Access Mode Sets the hard drive access mode. Options are: Auto (d[...]

  • Page 48

    BIOS Setup - 48 - (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. 2-5 Advanced BIOS Features Hard Disk Boot Priority  Species the sequence of loading the operating system from the inst[...]

  • Page 49

    - 49 - BIOS Setup Limit CPUID Max. to 3 (Note) Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.0. (Default: Disabled) No-Execute Memory Protect (Note) Enables or disab les Intel Exec ute Disable B it f un[...]

  • Page 50

    BIOS Setup - 50 - 2-6 Integrated Peripherals eXtreme Hard Drive (Intel P55 Chipset) j Enables or disables the X.H.D fun ction for the SA T A controllers inte grated in the Intel P55 Chipset. When set to Enabled , the PCH SA TA Control Mode item below will be set to RAID(XHD) automatically. For details on using the GIGABYTE X.H.D utility , refer to [...]

  • Page 51

    - 51 - BIOS Setup USB Storage Function  Determines whether to detect USB storage devices, including USB ash drives and USB hard drives during the POST . (Default: Enabled) T urbo USB3.0 (NEC D720200F1 USB 3.0 Controller) (Note) Determines whether to set the PCIe speed of the NEC D720200F1 USB 3.0 c[...]

  • Page 52

    BIOS Setup - 52 - Link Detected Displays transmission speed. Cable Length Displays the approximate length of the attached LAN cable. Note: The Gigabit hub will only operate at a speed of 10/100 Mbps in MS-DOS mode; it will operate at a normal speed of 10/100/1000 Mbps in Windows mode or when the LAN Boot ROM is activated. When a Cable Problem Occur[...]

  • Page 53

    - 53 - BIOS Setup ACPI Suspend T ype  Speciesthe ACPIsleepstatewhenthesystementerssuspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode. The system can be resumed at any time. S3(STR) Enables the syste[...]

  • Page 54

    BIOS Setup - 54 - (Note) Supported on Windows 7/Vista operating system only . Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Date (of Month)Alarm: Turn on the system at a specic time on each day or on?[...]

  • Page 55

    - 55 - BIOS Setup Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened eldwillshow"No"atnextboot.(Default:Disabled) Case Opened Displays the detection status of the chassis intrusion detection[...]

  • Page 56

    BIOS Setup - 56 - CPU Smart F AN Mode  Specieshowtocontrol CPUfanspeed.Thisitemiscongurableonlyif CPU Smart F AN Control is set to Enabled . Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode. (Default) Voltage Sets Voltage mode for a 3-pin [...]

  • Page 57

    - 57 - BIOS Setup Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. 2-9 Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2010 A ward[...]

  • Page 58

    BIOS Setup - 58 - Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will berequestedtoconrmthepassword.T ypethepasswordagainandpress<Enter>. The BIOS Setup program allows you to specify two separate passwords: Supervisor Password When a s[...]

  • Page 59

    - 59 - BIOS Setup Press <Enter> on this item and press the <Y> key . This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu. 2-12 Save & Exit Setup CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Save Data to CMOS  MB Intelligent T weake[...]

  • Page 60

    BIOS Setup - 60 -[...]

  • Page 61

    - 61 - Drivers Installation 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation • Beforeinstallingthedrivers,rstinstalltheoperatingsystem. • After installing the operating system, insert the motherboard driver disk into your optical drive. The driver Autorun screen is automatically displayed which look[...]

  • Page 62

    Drivers Installation - 62 - 3-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 3-3 T echnical Manuals This page provides GIGABYTE's application guides, content descriptions for this driver disk, an[...]

  • Page 63

    - 63 - Drivers Installation 3-4 Contact For thedetailed contactinformation of theGIGABYTET aiwan headquarter orworldwide branchofces, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information.[...]

  • Page 64

    Drivers Installation - 64 - 3-6 Download Center T o update the BIOS, drivers, or applications, cl ick the Download Center button to lin k to the GIGABYTE website. The latest version of the BIOS, drivers, or applications will be displayed. 3-7 New Utilities This page provides a quick link to GIGABYTE's lately developed utilities for users to in[...]

  • Page 65

    - 65 - Unique Features Chapter 4 Unique Features 4-1 Xpress Recovery2 Xp res s Re co ver y2 i s a ut ili ty t ha t a ll ows yo u to q ui ckl y co mpr ess an d back up your system data and perform restoration of it. Supporting NTFS, F A T32, and FA T16 le systems, Xpress Recovery2 can back up data on P AT A and[...]

  • Page 66

    Unique Features - 66 - Step 3: Wh en p art iti on ing y our ha rd d riv e, m ake su re t o leave unallocated space (10 GB or more is recom- mended; actual size requirements vary , depending on the amount of data) and begin the installation of the operating system. Step 1: Select BACKUP to start backing up your hard drive data. Step 4: Aft er th e o[...]

  • Page 67

    - 67 - Unique Features D. Using the Restore Function in Xpress Recovery2 E. Removing the Backup F . Exiting Xpress Recovery2 Sel ect RESTORE to res tore the bac kup t o you r h ard d rive i n case the system breaks down. The REST ORE option will not be present if no backup is created before. Select REBOOT to exit Xpress Recovery2. Step 2: After [...]

  • Page 68

    Unique Features - 68 - 4-2-1 Updating the BIOS with the Q-Flash Utility A. Before Y ou Begin 1. From GIGABYTE'swebsite, download thelatest compressed BIOSupdate le thatmatches yourmoth - erboard model. 2. Extracttheleand savethenewBIOSle(e.g.p55usb3.f1) to?[...]

  • Page 69

    - 69 - Unique Features B. Updating the BIOS When updat ing t he BI OS, c hoose the location where the BIOS le is saved. The following p rocedure as - sumesthatyousavetheBIOSletoaoppydisk. Step 1: 1. InserttheoppydiskcontainingtheBIOS[...]

  • Page 70

    Unique Features - 70 - Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen. Step 5: During the POST , press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter> to load BIOS defaults. Syste[...]

  • Page 71

    - 71 - Unique Features 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BIOS update. 2. Du ring the BIO S up date process , e nsure the In ternet conne ction is sta ble and do N OT i nter[...]

  • Page 72

    Unique Features - 72 - 4-3 EasyT une 6 GIGABYTE's EasyT une 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment. The user-friendly EasyTune 6 interface also includes tabbed pages for CPU and memory inform[...]

  • Page 73

    - 73 - Unique Features 4-4 Dynamic Energy Saver ™ 2 GIGABYTE Dynamic Energy Saver ™ 2 (Note 1) is a revolutionary technology that delivers u nparalleled power savings with a click of the button. Featuring an advanced proprietary hardware and software design, GIGA- BYTE Dynamic Energy Saver ™ 2isabletoprovideexceptionalpower?[...]

  • Page 74

    Unique Features - 74 - B. T otal Mode In T otal Mode, users are able to see how much total power savings they have accumulated in a set period of time since activating Dynamic Energy Saver ™ 2 for th ersttime (Note 3) . (Note 1) Before using the Dynamic Energy Saver ™ 2 function, make sure the CPU Enhanced Halt (C1E) and CPU EIST Funct[...]

  • Page 75

    - 75 - Unique Features 4-5 Q-Share Q-Share is an easy and convenient data sharing too l. After conguring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources. Directions for using Q-Share After installing Q-Share from the mother[...]

  • Page 76

    Unique Features - 76 - 4-6 Smart 6 ™ GIGABYTE Smart 6 ™ (Note 1) is designed with user-friendliness i n mind, and offers a combination of 6 innovat ive software utilities that provide easier and smarter PC system management. Smart 6 ™ allows you to speed up systemperformance,reduceboot-up time,manageasecureplatforma[...]

  • Page 77

    - 77 - Unique Features SMART Recovery With SMART Recovery , users can quickly create backups of changed data les (Note 2) or copy les from aspecic backup on P A T A  and SA T Ahard drives (partitioned on NTFSle system) in Windows Vista. SMART DualBIOS SM[...]

  • Page 78

    Unique Features - 78 - (Note 1) When launching Smart 6 ™ forthersttime,thesystemwillrequestyoutosetupapassword.Thispasswordisrequiredwhen you activate SMART DualBIOS or when you want to make changes to the SMAR T Recorder or SMART T imeLock settings. (Note2) Thechangeddata[...]

  • Page 79

    - 79 - Unique Features 4-7 Auto Green Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver , the sys- temwillenterthespeciedpowersavingmode. Sele cting a sys tem e ne[...]

  • Page 80

    Unique Features - 80 - With GIGABYTE eXtreme Hard Drive (X.H.D) (Note 1) , users can quickly congure a RAID- ready system for RAID 0 when a new SA T A drive is added. For a RAID 0 array that al- ready exists, users also can use X.H.D to easily add a hard drive into the array to expand its capacity . All with a simple click of a[...]

  • Page 81

    - 81 - Appendix Chapter 5 Appendix 5-1 Conguring SA T A Hard Drive(s) T o congure SA T A hard drive(s), follow the steps below: A. Install SA T A hard drive(s) in your computer. B. CongureSA T A controllermodeinBIOSSetup. C. CongureaRAIDarrayinRAIDBIOS. (Note 1) D. Makeaoppy[...]

  • Page 82

    Appendix - 82 - B. Conguring SA T A controller mode in BIOS Setup MakesuretoconguretheSA TA controllermodecorrectlyinsystemBIOSSetup. Step 1: Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-T est). T o create RAID, set PCH SA T A Control Mode under the Integ[...]

  • Page 83

    - 83 - Appendix C. Conguring a RAID array in RAID BIOS EntertheRAIDBIOSsetuputilitytocongureaRAIDarray .Skipthisstepandproceedwith theinstallationof Windowsoperatingsystemforanon-RAIDconguration. Step 1: After the POST memory test begins and before the oper[...]

  • Page 84

    Appendix - 84 - Step 3: After entering the CREA TE VOLUME MENU screen, enter a volume name with 1~16 letters (letters cannot be special characters) under the Name item and press <Enter>. Then, select a RAID level (Figure 4). RAID levels supported include RAID 0, RAID 1, Recovery , RAID 10, and RAID 5 (the selections available depend on the nu[...]

  • Page 85

    - 85 - Appendix Step 5: Enter the array capacity and press <Enter>. Finally press <Enter> on the Create V olume item to begin creat- ingtheRAID array .When promptedtoconrmwhether tocreatethisvolume, press<Y>toconrm or<N>to cancel (Figure 6). When completed, yo[...]

  • Page 86

    Appendix - 86 - Recovery V olume Options Intel Rapid Recover T echnology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive. With the Rapid Recovery T echnology , which employs RAID 1 functionality , users can copy the data from the master drive to the recovery drive; if needed, [...]

  • Page 87

    - 87 - Appendix Figure 10 Step 3: Press <Enter> under the Select Disks item. In the SELECT DISKS box, press <T ab> on the hard drive you want to use for the master drive and press <Space> on the hard drive you want to use for the recovery drive. (Make sure the recovery drive has equal or larger capacity than the master drive.) The[...]

  • Page 88

    Appendix - 88 - Delete RAID V olume T o delete a RAID array , selec t De lete RAID V olume in M AIN MENU and press <Enter>. In the DELETE VOLUME MENU section, use the up or down arrow key to select the array to be deleted and press <Delete>. Whenpromptedtoconrmyourselection(Figure12),press<Y>toc[...]

  • Page 89

    - 89 - Appendix The BIOS Setup menus described in this section may differ from the exact settings for your moth- erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version. Figure 1 Step 2: Save changes and exit BIOS Setup. 5-1-2 Conguring GIGABYTE SA T A2 SA T A Controller A. Installin[...]

  • Page 90

    Appendix - 90 - C. Conguring a RAID array in RAID BIOS Enter theRAID BIOS setup utilityto congure aRAID array . Skipthis step and proceedto the installationof Windowsoperatingsystemforanon-RAIDconguration. After the POST memory test begins and before the op[...]

  • Page 91

    - 91 - Appendix Create a RAID Array: In the main screen, press <Enter> on the Create RAID Disk Drive item. Then the Create New RAID screen appears (Figure 4). The Create New RAID block displays all the items that need to be set for creating an array (Figure 5). Steps: 1. Enter Array Name: Under the Name item, enter an array name with 1~16 let[...]

  • Page 92

    Appendix - 92 - 3. Assign Array Disks: After a RAID mode is selected, RAID BIOS automatically as signs the two hard drives installed as the RAID drives. 4. Set Block Size (RAID 0 only): Under the Block item, use the up or down arrow key to select the stripe block size (Figure 6), ranging from 4 KB to 128 KB. Press <Enter>. 5. Set Array Size: [...]

  • Page 93

    - 93 - Appendix Whennished,thenewRAIDarraywillbedisplayedinthe RAID Disk Drive List block (Figure 8). Figure 8 Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 [ fg T AB]-Switch Window [ hi ]-Select ITEM [ENTER]-Action [ESC]-Exit [ RAID Disk Drive List ] [ Main Menu ] [ Ha[...]

  • Page 94

    Appendix - 94 - Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 [ fg T AB]-Switch Window [ hi ]-Select ITEM [ENTER]-Action [ESC]-Exit [ RAID Disk Drive List ] [ Main Menu ] [ Hard Disk Drive List ] Gigabyte T echnology Corp. RAID Setup Utility v1.07.06 Create RAID Disk Drive Delete RAID Disk Drive Revert HD[...]

  • Page 95

    - 95 - Appendix 5-1-3 Making a SA T A RAID/AHCI Driver Diskette (Required for AHCI and RAID Mode) T o successfully install operating system onto SA T A hard drive(s) that is/are conguredto RAID/AHCI mode, you need to install the SA T A controller driver during the OS installation. Without the driver, [...]

  • Page 96

    Appendix - 96 - 5-1-4 Installing the SA T A RAID/AHCI Driver and Operating System With the SA T A RAID/AHCI driver diskette and correct BIOS settings, you are ready to install Windows Vista/ XP onto your hard drive(s). The followings are examples of Windows XP and Vista installation. A. Installing Windows XP Step 1: Restart your system to boot from[...]

  • Page 97

    - 97 - Appendix For the GIGABYTE SA TA2: Insert the oppy disk containing the SA T ARAID/AHCI driver and press <S>. Then a controller menu similar to Figure 3 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and press <Enter>. Step 3: On the next screen,[...]

  • Page 98

    Appendix - 98 - Figure 5 B. Installing Windows Vista (The procedure below assumes that only one RAID array exists in your system.) For the Intel P55: Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID hard drive will not be detected at t[...]

  • Page 99

    - 99 - Appendix The install menus described in this chapter are for reference only and may differ by driver version. Step 3: When a screen as shown in Figure 6 appears, select Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Se- ries SA TA RAID Controller and click Next . Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want [...]

  • Page 100

    Appendix - 100 - For the GIGABYTE SA TA2: Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID/AHCI hard drive(s) will not be detected at this stage), select Load Driver (Figure 8). Step 2: Insertthemotherboarddriverdisk(Met[...]

  • Page 101

    - 101 - Appendix Step 3: When a screen as shown in Figure 10 appears, select GIGABYTE GBB36X Controller and click Next . Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and then click Next to continue the OS installation (Figure 1 1). Figure 10 Figure 1 1 The install menus described i[...]

  • Page 102

    Appendix - 102 - Intel(R) Rapid Storage T echnology - option ROM - 9.5.0.1037 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. 3. Reset Disks to Non-RAID 4. Exit RAID V olumes : Nonedened. Physical Disks : Port Drive Model Serial # Size Type/Status(V ol ID) 0 ST3120026AS 3JT354CP 1 11.7GB Member Disk (0) 1 WDC WD800JD-22LS WD-WMAM[...]

  • Page 103

    - 103 - Appendix • Performing the Rebuild in the Operating System While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk. Then launch the Intel Rapid Stroage T echnology utility from All Programs in the Start menu. Step 1: Go to the M anage me nu and c lick Reb uild to another disk in Manag[...]

  • Page 104

    Appendix - 104 - • Restoring the Master Drive to a Previous State (for Recovery V olume only) When two hard drives are set to Recovery V olume in Update on Request mode, you can restore the master drive data to the last backup state when needed. For example, in case the master drive detects a virus, you can restore the recovery drive data to the [...]

  • Page 105

    - 105 - Appendix For the GIGABYTE SA TA2: Turn off your computer and replace the failed hard drive with a new one. Use either the RAID setup utility or the GIGABYTE RAID CONFIGURER utility in the operating system to perform the rebuild. • Rebuilding with the RAID setup utility Step 1: When the message "Press <Ctrl-G> to enter RAID Setu[...]

  • Page 106

    Appendix - 106 - • Rebuilding in the operating system Make sure the GIGABYTE SA T A2 SA T A controller driver has been installed from the motherboard driver disk. Launch the GIGABYTE RAID CONFIGURER from All Programs in the Start menu. Step 1: In the GIGABYTE RAID CONFIGURER screen, right-click on the array to be rebuilt in the RAID LIST block . [...]

  • Page 107

    - 107 - Appendix 5-2-1 Conguring 2/4/5.1/7.1-Channel Audio Th e m ot he rb oa rd p ro vi d es s ix a ud io j ac ks o n th e ba ck p an el w hi ch s up por t 2/ 4/ 5. 1/7 .1 -c han ne l (Note) audio. The picture to the right shows the default audio jack assignments. The integrated HD (High Definition) audio provides jack retasking capability that[...]

  • Page 108

    Appendix - 108 - Step 2: Connect an audio device to an audio jack. The The cur- rent connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers scre en, click t he Speake r Co ngura - tion tab. In the Speaker Conguration list, select Stereo , Quadraphonic , 5.[...]

  • Page 109

    - 109 - Appendix 5-2-2 Conguring S/PDIF In/Out A. S/PDIF In The S/PDIF In cable (optional) allows you to input digital audio signals to the computer for audio processing. 1. Installing the S/PDIF In Cable: 2. Conguring S/PDIF In: On the Digital Input screen, click the Default Format tab to select the default format. Click OK to complete. (Not[...]

  • Page 110

    Appendix - 110 - B. S/PDIF Out The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality . 1. Connecting a S/PDIF Out Cable: S/PDIF Coaxial Cable Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for transmitting the S/PDIF digital audio signals. S/PD[...]

  • Page 111

    - 1 11 - Appendix 5-2-3 Conguring Microphone Recording Step 1: After installing the audio driver , the HD Audio Manager icon willappearinthenoticationarea. Double-click the icon to access the HD Audio Manager . Step 2: Connect your mi crophone to the Mic in jack (pink) on th e b ack pa nel o r th e M ic i n j ack ( pin[...]

  • Page 112

    Appendix - 112 - Step 5: After c ompleting th e s ettings abov e, c lick Start , poi nt to All Programs , point to Accessories , and then click Sound Recorder to begin the sound recording. Step 1: Locate the V olume icon  inthe notication areaand right-click on this icon. Select Recording Devices . Step 2: On the Recording tab,[...]

  • Page 113

    - 1 13 - Appendix 5-2-4 Using the Sound Recorder A. Recording Sound 1. Make sure you have connected the sound input device (e.g. microphone) to the computer . 2. T o record the audio, click the Start Recording button . 3. T o stop recording audio, click the Stop Recording button . Besuretosavetherecordedaudioleuponcomp[...]

  • Page 114

    Appendix - 114 - 5-3 T roubleshooting 5-3-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the Support&DownloadsMotherboardF AQ page on GIGABYTE's website. Q: In the BIOS Setup program, why are some BIOS options missing? A: Some advanced options are hidden in the BIOS Setup program. Press <Delete>[...]

  • Page 115

    - 1 15 - Appendix 5-3-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn off the power. Remove all peripherals, connecting cables, and power cord etc. Isolate the short circuit. Secure the CPU cooler on the CPU. Connect the CPU cooler power[...]

  • Page 116

    Appendix - 116 - If th e p rocedure abov e i s u nable to solve your prob lem, cont act the p lace of p urchase or lo cal dealer for help. Or go to the Support&DownloadsT echnical Service Zone page to submit your question. Our customer service staff will reply you as soon as possible. The power supply , CPU or CPU socket might fail. The keyboa[...]

  • Page 117

    - 1 17 - Appendix 5-4 Regulatory Statements Regulatory Notices This document m ust not be copied wit hout our written permission, and the conte nts there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects a[...]

  • Page 118

    Appendix - 118 - Finally , we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly . Wit[...]

  • Page 119

    - 1 19 - Appendix[...]

  • Page 120

    Appendix - 120 -[...]

  • Page 121

    - 121 - Appendix[...]

  • Page 122

    Appendix - 122 -[...]

  • Page 123

    - 123 - Appendix[...]

  • Page 124

    Appendix - 124 -[...]

  • Page 125

    - 125 - Appendix[...]

  • Page 126

    Appendix - 126 -[...]

  • Page 127

    - 127 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .gigabyte.com.tw WEB address (Chinese): http://www .gigabyte.tw ?[...]

  • Page 128

    Appendix - 128 - • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .gigabyte.de • G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www .giga-byte.co.uk • Giga-Byte T echnology B.V . - The Netherlands WEB address : http://www .giga-byte.nl • GIGABYTE TECHNOLOGY FRANCE - France WEB address : http://www .gigabyte.fr • [...]