HANNspree T262 manuel d'utilisation

[...]

Table of Contents 1 Regulatory Information ... ..................................................... ......... 3 Description of Warning Sy mbols ............ .............. .............. ........... 5 Safety Notices ...................... .............. .............. .............. .............. 6 Preface .......... .............. ..............[...]

Table of Contents 2 2.3 Inserting a Memory Card (For built-in E-Card only) .. .............. .............. .............. . 4 3 2.4 Using the TV ............ .............. .............. .............. ......... 4 5 2.4.1 Using the Remote Control .............. .............. .... 4 5 2.4.2 Turning the TV On and Off .......... .............. ....[...]

3 R e gula tor y Inf or mation FCC Compliance S tatement 1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditi ons: (1) This device may not cause harmful interference, and ( 2) this de vice must a ccept any interference received, including inter ference that may cause und esired operation. Additiona[...]

4 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radi o noise emissions from digital a pparatus as set out in the Radio Interferen ce Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B. CE Conformity S tatement 2 This device complies with the requireme[...]

5 Description of War ning Symbols Before Y ou Proceed 1. Read all Safety Notices and instruction s in this User ’ s Manual carefully before either pluggi ng in or turning the TV on. 2. Keep this User ’ s Manual in a safe place for future reference. Keep the box and p ackaging in case the TV needs to be ship ped in the future. 3. Follow the TV a[...]

6 Saf ety Notices Inst allation Safety Notes Antenna We suggest tha t you use an outdoo r antenna to get the best signal possible unless you have ca ble TV or a centralized indoor ante nna system. Y ou may , however , use an ant enna indoors if it is placed in a location free fr om interference. Location Avoid al lowing the TV to get prolonged expo[...]

7 IMPORT ANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water . 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Inst all in accordance with manufacturer’s instructio ns. 8 Do not install near any heat sources such [...]

8 9 Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than th e other . A grounding-type plug has two blade s and a third groun ding prong. The wide blade o r the third prong are provided for your safety . If the provided plug does not fit into your outlet, consult an electrici[...]

9 Notes: • The LCD TV is for entertainment use only and visual display tasks are excluded. • This device uses a VGA connector to connect to a PC. T o reduce the influence of mains freq uency on the source signal, use a VGA monitor cable with ferrite shield. 14 Refer all servicing to qualified service personnel. Servicing is required when the ap[...]

10 Personal Safety Installation 1. T o avoid overloading the power sup ply , never plug too many electrical devices into an outlet, power strip, or extension cab le. 2. Dangerous high-volt age electric power component s are located inside the TV . T o avoid electric shock, do not disassemble the casing. 3. Do not place or drop met als, sma ll objec[...]

11 Preface Thank you for purchasing a Hannspre e Liquid Crystal Display T elevision (LCD TV). Y our new TV will allow y ou to enjoy superio r audio and video while enriching your lifestyle with advanced technology . Please carefully read this manual in its entirety befo re setting up, using or operating your TV . T o ensure the safe and correct ins[...]

12 Copyright © Copyright 2006 Hannspree, Inc. All rights reserved. This manu al is protected by copyright and distributed under lic enses restricting its use , copying and distribution. No part of this manual may be repr oduced in any form by any means without the prior writt en authorization of Hannspree . The TV described in this manual may incl[...]

13 BBE, SRS, HDMI License St atement s Manufactured under license from BBE Sound , Inc. Licensed by BBE Sound, Inc. under one or more of the following US paten ts: 5510752, 573 6897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. BBE ViV A HD3D (High Definition 3D) Sou nd provides musically accurate natural 3D images with Hi-Fi sou[...]

14 1 Getting Star ted 1.1 Pac ka ge Contents Make sure the followin g components a re included in the box. Please con tact Hannspree Custom er Service immed i ately if anything is missing or damaged. •T V • User's manual • Quick start guide • Warranty and service manual • Power cord • Remote control a nd batteries • A/V cable kit[...]

15 1.2 Introducing the TV Y ou can watch P AL/SECAM broadcast or cable television channels, and easily connect a VCR, STB or DVD pl ayer to the standard CVBS, S-Video and SCART inp ut ports (loc ation of these port s depends on model). Y ou can also use the TV as a monitor for your PC by conn ecting it through the D-sub port. Convenient control but[...]

16 1.2.2 Control Panel Description Icon Function Power/ Power LED POWER T urns the TV on and of f. Indicates power st atus. Source SOURCE Selects the input sour ce to be displayed (TV , (DTV), A V1, A V2, A V3, A V4, (A V5), (E-Card), HDMI, PC). Notes: • DTV is available for specified models. • A V5 is for Asia Pacific mode ls. • E-Card is av[...]

17 1.2.3 Input and Output J acks For European (EU) models Description Connector Function AV 1 (SCART1) Use the A V1 input to connect an external device, such as a VCR, STB, or a DVD player with composite / RGB output. Audio Input (R/L) Video Input (RGB/V) Audio Output (R/L) Video Outpu t (V) AV 2 (S/V/L/R ) Use the A V2 input to connect an external[...]

18 AV 4 (R/L/Y/P B /P R ) Use the A V4 inputs to connect an external device, such as a VCR, STB, or a DVD player with a component output. Audio Input (R/L): red and white audio cables. Video Input (Y/P B /P R ): video cables. ANT (Antenna/ Cable TV line in) Connects to an antenna or CA TV cabl e television line. AC IN Connects to the included power[...]

19 For Asia Pacific (AP) models Description Connector Function AV 1 (R/L/V) Use the A V1 input to connect an external device, such as a VCR, STB, or a DVD player with a composite output. Audio Input (L/R): red and white audio cables. Video Input (CVBS): yellow (CVBS) cable. AV 2 (S/V/L/R ) Use the A V2 input to connect an external device, such as a[...]

20 ANT (Antenna/ Cable TV line in) Connects to an antenna or CA TV cabl e television line. AC IN Connects to the included power cord. PC Connect to a PC’ s VGA port. HDMI Connect s to devices such as a DVD player or set-top bo x. LINE IN Connects to a PC’ s line/audio out port. LINE OUT (R/L) Connects to external audio amplifier . SUBWOOFER OUT[...]

21 1.2.4 R emote Control Description Icon Function Menu Press this button to turn the On- Screen Display (OSD) menu on and off. Arrow Press S / T / W / X to scroll through the on-screen display menus. In memory card mode, press the arrow buttons to navigate menus, or to pan a picture when zooming in on a photo in Photo mode. Numbers 0 ~9 Use to sel[...]

22 Select channel (AP models) CH S / C H T Changes channels. Press CH S to increase the channel number . Press CH T to decrease the channel number . (Press CH S / CH T or numbers buttons to have all sour ces return to TV mode.) Select channel (EU models) P S / P T Changes channels. Press P S to increase the channel number . Press P T to decrease th[...]

23 Wide Press this button to switch between wide screen and other modes (4:3 – 16:9). (Panoramic mode is available only for selected models.) In memory card mode, press this button to stop proceeding operation. Hold Press this button to hold. In memory card mode, press this button to go to the next track or picture. Sleep Press this button re pea[...]

24 Swap Press this button to swa p the activation of the primary and secondary sources fo r T win mode (available only for selected models). In memory card mode, press this button to fast rewind. Fast Forward In memory card mode, press this button to fast forward. Te l e t e x t (EU models only) Press this button to switch to teletext mode. In memo[...]

25 Light Press this button to activate the remote control backlight. When you press a button, the backlight will turn off. T o tur n it back on, pre ss this button again. Description Icon Function Li ght[...]

26 1.2.5 T elete xt Mode Description Icon Function Numbers (0-9) Use the number keys to enter the teletext page nu mber directly . Favorite The color keys are use d with the icons at the bottom of the T eletext page. Arrows Use the right and left keys to go to the desired page. Wide Increases the zoom magnification of each page. Press the button to[...]

27 1.2.6 Inser ting the R emote Control Batteries 1 Open the battery compartment cover at the back of the remote control. 2 Insert the batteries p aying attention to the polarity markings inside the battery compartmen t. 3 Replac e the battery compartmen t cover .[...]

28 CAUTION • If the remote control is not used fo r a long period, remove the batteries and store them properly . • Handle damaged or leaking batteries carefully , and wash hands with soap if they come in contact with leaked chemical fluids. • If your remote control ha s two batteries, do not mix new and ol d batteries or the life of the new [...]

29 2 Setting up your TV 2.1 Basic Connections The following sections prov ide users wit h some basic instructions to use the TV . Please read them carefully befo re you st art utilizing the functions. 2.1.1 Connecting the P o wer Cord and T ur ning On 1 Connect the power cord to AC IN input jack on the rear panel of the TV . 2 Insert the plug at th[...]

30 2.1.2 Connecting an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (RF-in Analog) on the back of the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the antenna socket or CA TV socket. Note: If you cannot receive channels af ter connecting to an antenna or cable TV line, try sc[...]

31 2.2 Connecting Exter nal De vices Connect external devices such as VCRs, STBs, or DVD pla yers to the TV using the A V1, A V2, A V3, A V4 and A V5 ports on the back or side of the TV . Note: A V5 is for AP market only . 2.2.1 Connecting Exter nal Ear phones External earphones may be used to lis ten to the TV rather than using the built-in speake[...]

32 2.2.2 Connecting an Amplifier Using Analog Aud io Connect an external amp lifier or speakers to the line out port to provide better sound quality . Refer to the following i llustration. Note: External amplifier or powered speakers are not included with the TV . RL Optical OUTPUT ( AUDIO ) L R Line out Audio cable Speakers wi th Amplifier OR For [...]

33 2.2.3 Connecting an Amplifier Using Digital Audio Use the optical dig it al out connector to connect an audio decoder or audio/video processor . Refer to the following illustration to connect optical digital out. Note: The supporting devices mentioned in this manual may vary on different models. For more information, please refer to the manufact[...]

34 2.2.4 Connecting a Decoder/V CR/Recorder or DVD Player Using SCART (EU models only) Use the SCART provided to connect a T V to a VCR, Recorder , DVD player or Decoder . Refer to the diagrams on the following page when reading t he following instructions. Notes: • The output function of A V3 is avai lable only for selected models. • T he S-Vi[...]

35 1. Connecting a VCR or Recorder: • Connect the antenna cable to the TV input on the VCR/Recorder. • Connect an output cable to the TV output on the VCR/Recor der and to the TV input at the back of the TV. • Connect the SCART cable to the AV1 or AV3 input at the back of the TV and to the VCR/Recorder SCART c onnector. It is preferable with [...]

36 2. Connecting a SA T/STB: • Connect the antenna c able to the SAT/STB. • Connect the aerial cable from the SAT/STB TV out to the recorder TV in. • Connect the aerial cable from the reco rder TV out to the RF-in of the TV. • Connect the SAT/STB to AV3 (or AV1) by SCART cable. • Connect the recorder to AV1 (or AV3 for models with output [...]

37 3. Connecting a DVD Player: • Connect the SCART cable to the AV1 or AV3 input at the back of the TV and to the SCART connector on t he DVD player. It is preferable to connect peripheral s with RGB outp ut to AV1 as RGB provides a better picture quality. Note: Refer to the user ’ s manual included with the device for more det ailed instructio[...]

38 2.2.5 Connecting a V CR/STB/DVD Play er Using Component Vi de o The following illustration shows how to connect the TV to a VCR / STB / DVD player using the A V4 (for EU models) or A V4/A V5 (for AP models) component video ports. Actual co nnections may vary according to the make and model of you r device. EU Model VCR STB DVD Cables and connect[...]

39 2.2.6 Connecting a V CR/STB/DVD Play er Using Composite Video The illustration presented here shows ho w to connect your TV to a VCR / STB / DVD player using the A V2 (for EU models) or A V1/A V2 (for AP models) composite video port. Actual conne ctions may vary according to the make and model of your device. R VIDEO L S-VIDEO EU / AP Models VCR[...]

40 2.2.7 Connecting a Video Game Console The following illustration shows how to connect the TV to a video game console using the A V2 port. Actual connections may vary according to the make and model of your device. Note: • When connecting the S-Video connector and A V connector at the same time, the priority is give n to the S-V ideo connector [...]

41 2.2.8 Connecting a PC Connect the TV to your PC to use it as the mon itor using the D-Sub port as shown. Connect the D-Sub port of the TV to the D-Sub output of the PC. Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC. Notes: • Location of the connectors varies according to the TV model. • For[...]

42 2.2.9 Connecting HDMI HDMI (High Definition Mu ltimedia Interface) with HDCP (High Definition Copy Protection) assures that the best video signal is always sent from source (HDTV sign al, DVD player) to the TV . Refer to the following illustration to connect an HDMI device to the TV . Notes: • When the HDMI cable is connected, connecting the a[...]

43 2.3 Inser ting a Memor y Car d (F or built-in E-Car d only) 1 Insert the memory card(s) into th e ap propriate card reader slot(s)on the control panel of the TV as shown. 2 Push the card(s) g ently until they stop. Make su re the card(s) are inserted in th e correct way . 3 When inserted, the memory card(s) will protrude as shown. 4 T o remove a[...]

44 Notes: • T o prevent d at a loss, en d t a sks that retrieve data from the memory card before removi ng it from the card slo t. • Use only certified memory cards. • Support s memory cards with a capacity of up to 1GB. • F lash Card rela ted functions and file names are only sh own in English. • Be careful when removing memory cards; re[...]

45 2.4 Using the TV 2.4.1 Using the R emote Control For best results, use the remote control within a pr oper distance from the front of the TV . Do not exceed an ang le of 30 degrees when pointing at th e TV. Notes: • The operational distance may be shortened wh en the signal se nsor is directly expose d to strong light. • Aim the transmitter [...]

46 2.4.4 Switc hing Source Signals Press SOURCE on the control panel or Source on the remote control to select the incoming source signal. A screen appea rs with all sources listed. (Some of the sources ar e avail able only for selected mode ls.) 1 Press S / T , CH S / CH T or P S / P T on the remote control or CH S or CH T on the co ntrol pane l t[...]

47 2.4.5 Adjusting the V olume 1 Press VOL+ to increase the volume. 2 Press VOL- to decrease the volume. 3 Press to eliminate sound. A mute icon appears on the top left corner of the screen and sound is turned of f. 4 Press again or press the volume buttons to resto re the original volume. Mute Mute[...]

48 2.5 Using the E-Card Function (F or built-in E-Card only) The E-Car d function enables yo u to view photos, w atch movies, and list en to MP3 files on the memory card inserted in the card slot. The device supports Com pact Flash (CF), Micro drive (MD), Sm art Media (SM), Secure Digital (SD), Mul ti Media Card (MMC), and Memory S tick (MS-Pro) ca[...]

49 4 The E-Card main screen appears. Y ou can choose to view photos, listen to music, watch videos, or look at the contents of the memory card. PHOTO MUSIC VIDEO FILE SELECT ONE AND ENTER: E-Card main screen[...]

50 2.5.1 R emote Control Keys in E-Card Mode The follow ing t able lists the rem ote control buttons used to operate the E- Card feat ure. Button Description Function Cursor up / down / left / right Press these buttons to navigate the E-Card menus. In Photo mode, use these buttons to p an a picture when zooming in. Play / Pause Press this button to[...]

51 Effect Press this button to toggle between the EQ mode for music or photo slideshow mode. Repeat Press this button to repeat the playing operation. Fast rewind Press this button to fast rewind. Fast Foward Press this button to fast forward. Button Description Function[...]

52 2.5.2 Viewing Photos 1 When the E-Card main screen appears, use the W / X bu tt o n on the remote control to select PHOTO. 2 Press to display the thumbnails of images on the memory card. 3 Use the S / T / W / X button to select a thumbnail image. 4 Press to expand the selected thumbnail to fu ll screen mode. PA G E 01/01 SD[...]

53 5 Press the X / T / button to go to the nex t picture. Press the W / S / button to go to the previous pi cture. Note: If the image is not in the st andard size/resolution (i.e. 800x600, 1024x768), it may appear deformed or with a blue/black background. Zooming and Panning The E-Card function enable s you to zoom in on images and pan th e view . [...]

54 V iewing a Slide Show The E-Card function has a slide show feature that enables you to view all the images by order . 1 Press on the remote control to st art the slide show . The files are viewed sequentially , and files in you r music library are also played in sequence. 2 Press again to stop the slide show . T o pa use a slide show , press on [...]

55 T ransition T able Tr a n s i t i o n Description 1 FULL SCREEN Image appears full screen. 2 RO LL: TOP TO BOTT OM Image rolls in from top to bottom. 3 ROLL: BOTT OM TO TO P Image rolls in fro m bottom to top . 4 ROLL: TOP/BOTT OM TO CENTER Image rolls in from top and bottom to center . 5 ROLL: CENTER TO TO P/B OT TOM Image rolls in from center [...]

56 12 BLIND: LEFT T O RIGHT Image rolls in blinds from lef t to right. 13 CROSS F ADE Image fades in and out. 14 SLIDE MODE: RANDOM T r a nsition effect s are chosen randomly . T ransition T able Tr a n s i t i o n Description[...]

57 2.5.3 Listening to Music 1 When the E-Card main screen appears, use the W / X button on the remote control to selec t MUSIC. 2 Press . A screen appears displaying a list of the music stored on your memory card. 3 Use the S / T / W / X button to select a music file. The selected file start s playing. When the file finishes playing, the next file [...]

58 4 Press to display the Music Equalizer screen. This screen enables you to view information about the file you are playing. Repeat mode Press to switch among the following repeat modes: – ONE: repeat s one file – ALL: repeat s all files in sequence – OFF: turns r epeat mode of f EQ mode Press to toggle EQ mode: – Choose from Jazz / Rock /[...]

59 2.5.4 Wa tch ing Videos 1 When the E-Card main screen appears, use the W / X button on the remote control to select VIDEO. 2 Press . A screen appears displaying th umbnails of the videos on your memory card. 3 Use the S / T / W / X button on the remote control to select a video file. 4 Press . The selected video file begins playing. PA G E 01/01[...]

60 2.5.5 Viewing Memor y Card Files 1 When the E-Card main screen appears, use the W / X button on the remote control to select FI LE. 2 Press . A screen appears displaying a list of the files on your memory card. The file type is deno ted by the icons, and the file size, creation date, and thumbnail view of the file provides additional informatio [...]

61 3 Adjusting On-Scr een Display (OSD) Settings The On-Screen Display (OSD) me nu system provides a q uick and simple method to adjust the TV settin gs. This chapter describes ho w to change each of the available settings. The OSD menu can be accessed through the buttons either on the front control pa nel or the remote control. 3.1 OSD Setting Men[...]

62 TV Enables you to choose TV or CA TV , autoscan for channels, add an d delete channels, and e dit channel names. CUSTOMIZE Enables you to set the OSD language, set the sleep timer and enable closed captions. Notes: •P r e s s / MENU to exit the menus at any time. • Y ou can control the OSD with eith er the remote co ntrol o r the TV control [...]

63 3.2 Adjusting Video Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the VIDEO Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the VIDEO Menu. 5 Press to exit the VIDEO menu. Menu VIDEO Video Mode Custom Noise[...]

64 The Video Mo de menu includes the following option s. Option Description Video Mo de Enables you to customize the video display . The following options are available: Vivid Sets the display for enhanced picture contrast and saturation. S tandard Sets the d isplay for normal viewing (default). Soft Sets the display for mild sharpness. Custom Enab[...]

65 Noise Reduction Noise reduction enables you to reduce the amount of interference in the signal. The following options are available: • High •M i d d l e •L o w •O f f Note: Noise reduction only works in TV and A V1 ~ A V3 modes. Color T emperature Color temperature refers to the warm or cool feeling of a color , rather than actual temper[...]

66 3.3 Adjusting Audio Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the AUDIO Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the AUDIO Menu. 5 Press to exit the AUDIO menu. Menu AUDIO Off Sound Effect Custom[...]

67 The Audio Mode menu includes th e following options. Option Description Balance Changes th e balance betw een the lef t and right speakers. Sound Ef fect T oggle s between the T ruSurround XT and BBE ViV A HD3D sound features. Sound Mode Enables you to toggle between sound modes: •O f f •M u s i c • S peech •J a z z • Concert •M o v [...]

68 3.4 Adjusting PC Settings If a PC is connected, the PC mode menu items become available. The PC Mode menu includes the following options. Press to enter the OSD Main Menu screen. 1 Press or X to enter the PC Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the change[...]

69 The PC Settings menu includes the followin g options: Option Description H. Position Press W or X to adjust the hori zontal position of the display . V . Pos ition Press W or X to adjust the vertic al position of the display . Phase Press W or X to adjust the phase timing. Clock Press W or X to adjust the clock timing. DOS Mode Select the optima[...]

70 3.5 Adjusting TV Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the TV Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the TV Menu. 5 Press to exit the TV menu. Menu TV On Channel Skip LUXEMBOURG Country Cha[...]

71 The TV Mode menu includes the following optio ns: Option Description Channel No. Use to select a channel to adjust its settings. Channel Skip Select ON to remove the selected channel number from the chann el list. Select OFF to add the selected channel number to the channel list. Fine T uning Select this item and press W or X to fine tune a chan[...]

72 P ro gr am T a bl e A ll ow s yo u to vi ew a nd e di t a ll s to re d ch an ne l s. T o d elete a channel from the list: 1 Pr es s / / / to s el ec t t he c han ne l y ou w ant t o de le t e. 2 Press V OL - to d el e te . 3 Pr e ss to e x it . T o c hange channel positions in the list: 1 Pr es s / / / to s el ec t t he c han ne l yo u wa nt to [...]

73 3.6 Adjusting Customize Settings Press to enter the OSD Main Men u screen. 1 Press or X to enter the CUST OMIZE Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the CUSTOMIZE Menu. 5 Press to exit the CUSTOMIZE menu. Menu CUSTOMIZE S[...]

74 The Customize Settings menu incl udes the followin g options: Option Description Language Select from the following language options: • English • Español • Français • 繁體中文 Note: OSD language may vary from region to region. Background Enables you to set the OSD background to be translucent or solid. SCART2 Input Select the input[...]

75 4 Using POP The TV features POP (Pictu re Outs ide Pi cture) that enables you to view two sources at the same time . 1 Press to open the double w indows, which play the independent content from two dif ferent input sources. 2 Press to activate the left windo w for source selection. Press to select the incoming sour ce signal, as described in “[...]

76 Note: In E-Card mode (for selected models), the POP function is not available. 3 Press to switch the audio output from the activated window (marked with a blue fra me). 4 Press to disable the POP function and return to the normal display . Note: Some features (for example, ‘Wide’ and ‘Hold’) on the remote control unit are not available i[...]

77 5 T r oubleshooting Situation Solution No picture and sound. • Connect the power cord properly . • Check if the p ower LED is on or not. • Press power on the control panel or remote control. • Press source to cycle through connected video sources. • Press channel up o r channel down to switch to other TV stations. • Make sure all cab[...]

78 Snow appears on the screen. • Adjust the location of the antenna, placing it far from roads or sources o f interference. • Check the antenna and the video signal line connections. Blurred or overlapped ima ges. • Readjust the sharpness setting. • Choose programs with high quality signals. • Adjust the direction of the antenna or change[...]

79 6 War ranty and Ser vice For comple te warranty service information, please ref er to the “W arranty and Service Manual” enclosed with your TV .[...]

80 7 Specifica tions LCD Panel Size 26/32/37 inch TFT Aspect Ratio 16:9 Best Resolution 1366 (horizontal) x 768 (vertical) TV System EU: P AL-B/G D/K I SECAM-L AP: P AL-B/G D/K I Video System A V1 (SCART): RGB/CVBS with Video out A V2: S-Video/CVBS A V3 (SCART): S-V ideo/CVBS with optional video out A V4: YPbPr E-Card (Selected models only) HDMI V [...]

81 7.1 PC Mode Suppor t Timing Pixel Format Hor . Freq. (kHz) Hor . Polarity Ve r. F r e q . (Hz) V ertical Polarity St andard 1 640*480 31.47 – 60 – VESA 2 640*480 37.861 – 72 – VESA 3 640*480 37.5 – 75 – VESA 4 800*600 35.156 + 56 + VESA 5 800*600 37.879 + 60 + VESA 6 800*600 48.077 + 72 + VESA 7 800*600 46.875 + 75 + VESA 8 1024*768 [...]

82 8 Glossar y Broadcast TV : Br oadcasting video signals using high- frequency electromagnetic waves to d istribute tele vision channels to viewers (stand ard TV broadcast). CA TV : Community Antenna T elevision, the original name for cable TV . A television d istribution system that uses coaxial cable in stead of the traditional ra dio broadcasti[...]

[...]

MEMO[...]