Hitachi CP-X2511N manuel d'utilisation

1 Projector CP-X2011N/CP-X2511N /CP-X3011N/CP-X4011N User's Manual (detailed) Oper a ting Guide Thank you for purchasing this projector . ►Before using this product, please read all manuals for this product. Be sure to read “ Safety Guide ” first. After reading them, store them in a safe place for future reference. WARNING • The infor[...]

2 Contents Introduction . .............. 3 Features . ..................... 3 Checking the contents of package ... 3 Part names . ................... 4 Setting up . ................ 7 Arrangement ................... 7 Connecting with your devices ...... 9 Connecting to a power supply ..... 1 4 Using the security bar and slot . . . . 14 R emote cont[...]

3 Introduction • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector . Use special caution for the lens. NO TE Introduction The projector provides you with the broad use by the following features. Chec king the contents of package  This projector has a variety of I[...]

4 Introduction Projector (1) Lamp cover (  85 ) The lamp unit is inside. (2) Focus ring (  21 ) (3) Zoom ring (  21 ) (4) Control panel (  5 ) (5) Elevator buttons (x 2) (  21 ) (6) Elevator feet (x 2) (  21 ) (7) Remote sensor (  15 ) (8) Lens (  90 ) (9) Intake vents (10) Filter cover (  87 ) The air filter and intake [...]

5 Introduction Control panel (1) ST ANDBY/ON button (  17 ) (2) INPUT button (  18 ) (3) MENU button (  26 ) It consists of four cursor buttons. (4) POWER indicator (  17, 93, 94 ) (5) TEMP indicator (  93, 94 ) (6) LAMP indicator (  93, 94 ) R ear panel (  9 ~ 13 ) (1) USB TYPE A port (2) LAN port (3) HDMI port (4) USB TYPE B [...]

6 Introduction R emote control (1) VIDEO button (  19 ) (2) COMPUTER button (  19 ) (3) SEARCH button (  20 ) (4) ST ANDBY/ON button (  17 ) (5) ASPECT button (  20 ) (6) AUTO button (  22 ) (7) BLANK button (  25 ) (8) MAGNIFY - ON button (  24 ) (9) MAGNIFY - OFF button (  24 ) (10) MY SOURCE/DOC.CAMERA button (  19,[...]

7 Setting up Install the projector according to the environment and manner the projector will be used in. Ar rangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1[...]

8 Setting up ►Place the projector in a stable horizontal position. If the projector falls or is knocked over , it could cause injury and/or damage to the projector . Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined[...]

9 Setting up Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the acce[...]

10 R L COMPONENT Cb/Pb Y Cr/Pr AUDIO OUT MIC HDMI USB TYPE B USB TYPE A DC5V 0.5A LAN COMPUTER IN1 COMPUTER IN2 VIDEO S-VIDEO CONTROL MONITOR OUT AUDIO OUT IN3 IN1 IN2 L R L R Y Cb/Pb Cr/Pr HDMI R L R L VIDEO S-VIDEO AUDIO OUT AUDIO OUT AUDIO OUT USB (A) DISPLA Y RS-232C Connecting with your devices (continued) • When AUT O is selected for the CO[...]

11 Connecting with your devices (continued) (continued on next page) • Before connecting the projector to a computer , consult the computer ’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector . - Some signal may need an adapter to input this projector . - Some[...]

12 Connecting with your devices (continued) Setting up • If you insert a USB storage device, such as a USB memory , into the USB TYPE A port and select the port as the input source, you can view images stored in the device (  73 ) . • Y ou can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in sp[...]

13 Connecting with your devices (continued) T o use network functions of the projector , connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. T o use NETWORK BRIDGE function, also connect the CONTROL port and an RS-232C port of the external device to [...]

14 Setting up Connecting to a po wer supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. ►Please use extra caution when connecting the power co[...]

15 30º 30º Approx. 3 m R emote control Remote control About the r emote control signal The remote control works with the projector ’s remote sensor . This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left and right of the sensor) with[...]

16 R emote control Changing the fr equenc y of r emote contr ol signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly , attempt to change the signal frequency . In order to set the Mode, please keep pressing the combination of two buttons listed be[...]

17 P ow er on/of f 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. T ur ning on the po wer 2. Make sure that the POWER indicator is steady orange (  93 ). Then remove the lens cover . 3. Press ST ANDBY/ON button on the projector or the remote control. The projection lamp will light up and POWE[...]

18 Operating Operating 1. Adjusting the v olume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. ● When is selected for current picture input port, the volume adjustment is disable[...]

19 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 12 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE Operating 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below . Selecting an input signal (continued[...]

20 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 12 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect r a tio ● ASPECT button does not wor[...]

21 Operating Adjusting the pr ojector's ele va tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees[...]

22 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation. T o comp[...]

23 Operating 1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. Cor r ecting the k eystone distor tions 2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following. (1) AUT O executes automatic vertical keystone corre[...]

24 Operating 1. Using the ma gnify f ea tur e 2. MAGNIFY ON/OFF button VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON 12 COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE 3. 4. 5. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen[...]

25 Operating 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu (  44 ). T o exit from the BLANK screen and return to the input signal screen, press BLANK button again. T empor aril y blanking the screen ● The projector automatically e[...]

26 Operating 1. T o start the MENU, press the MENU button. The MENU you last used (EASY or ADV ANCED) will appear . EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the ▲/▼ cursor buttons to select an item to operate. If you want to change it to the ADV ANCED MENU, select the ADV ANCED MENU. (2) Use the[...]

27 Operating Using the menu function (continued) 3. T o close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position, use the cursor buttons after pressing the POSIT[...]

28 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (  33 ). AUTO KEYST ONE Using the ?[...]

29 EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the Eco mode. See the ECO MODE item in SETUP menu (  41 ). MIRROR Using the ◄/► buttons switches the mode for mirror status. See the MIRROR item in SETUP menu (  41 ). RESET Performing this item resets all of the EASY MENU items except the FIL TER TIME and LANGU[...]

30 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. Dar[...]

31 PICTURE menu (continued on next page) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode. OFFSET adjustments [...]

32 PICTURE menu Item Description SHARPNESS Using the ◄/► buttons adjusts the sharpness. Weak  Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. ACTIVE IRIS This item is available only for CP-X251 1N, CP-X301 1N or CP-X401 1N. Using the ▲/▼ cursor buttons [...]

33 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. F[...]

34 IMAGE menu Item Description V POSITION Using the ◄/► buttons adjusts the vertical position. Down  Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION is selected will reset the V POSITIO[...]

35 IMAGE menu Item Description H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker . Right  Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN , USB TYPE A , USB TYPE B or HDMI port. H SIZE Using the ◄/► buttons adj[...]

36 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ?[...]

37 INPUT menu (continued on next page) Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO  NTSC  P AL  SECAM N-P AL  M-P AL  NTSC4.43 • This item is performed only for[...]

38 INPUT menu Item Description COMPUTER IN The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type. AUTO  SYNC ON G OFF • Selecting the AUTO mode allows you to input a sync on G signal or [...]

39 INPUT menu Item Description RESOLUTION The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu select the resolution you wish to display using [...]

40 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description AUTO KEYST ONE Selecting this item performs the Automatic keystone dis[...]

41 SETUP menu Item Description ECO MODE Using the ▲/▼ buttons turns off/on the Eco mode. NORMAL  ECO • When the ECO is selected, acoustic noise and screen brightness are reduced. • When AUTO ECO MODE (  40 ) is set to ON, the projector will always be set to Eco mode at start-up regardless this setting. MIRROR Using the ▲/▼ buttons[...]

42 A UDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item Description VOLUME Using the ◄/► buttons adjusts the volume. Low  High[...]

43 A UDIO menu Item Description HDMI AUDIO Using the ▲/▼ buttons switches the mode for the HDMI audio. Check each of the two modes provided and select the suitable one for your HDMI audio device. 1  2 MIC LEVEL Using the ▲/▼ buttons switches the input level to match that of the microphone connected to the MIC port. HIGH  LOW HIGH: for[...]

44 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼/◄/► buttons switches the OSD (On Scr[...]

45 SCREEN menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturi[...]

46 SCREEN menu Item Description MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON  OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen P ASSWORD item in SECURITY menu (  68[...]

47 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the[...]

48 SCREEN menu Item Description SOURCE NAME ( Continued ) (6) The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. T o erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time. Also if you move the cursor t[...]

49 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not wor[...]

50 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FIL TER TIME. Then perform it according to the following table. Item Description AUTO SEARCH Using [...]

51 OPTION menu Item Description AUTO POWER OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes)  Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically . When the time is set to 1 to 99, and when the passed time with no- sign[...]

52 OPTION menu Item Description LAMP TIME The lamp time is the usage time of the lamp, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog. T o reset the lamp time, select the OK using the ► button. CANCEL  OK • Please reset the[...]

53 OPTION menu Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1/2 on the remote control (  6 ). (1) Use the ▲/▼ buttons on the MY BUTT ON menu to select a MY BUTTON - (1/2) and press the ► or ENTER button to display the MY BUTT ON setup dialog. (2) Then using the ▲/▼/◄/► buttons sets[...]

54 OPTION menu Item Description MY BUTT ON ( Continued ) • ACTIVE IRIS: Changes the active iris mode. (This item is available only for CP-X251 1N, CP-X301 1N or CP- X401 1N .) • PICTURE MODE: Changes the PICTURE MODE (  28 ). • FIL TER RESET : Displays the filter time reset confirmation dialogue (  52 ). • TEMPLA TE: Makes the templ[...]

55 OPTION menu Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. F AN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. [...]

56 OPTION menu Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. ON  OFF • Please use this function to prevent tampering or accidental operation. This function does not have any ef fect on the rem[...]

57 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) COMMUNICA TION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE  OFF NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer . The CONTROL por[...]

58 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF  1s  2s  3s OFF: Select this mode if it is not required to check the responses [...]

59 OPTION menu Item Description SERVICE (continued) INFORMA TION Selecting this item displays a dialog titled “INPUT_INFORMA TION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCAR T RGB” message means the COMPONENT port is working as a S[...]

60 NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions. Select an item using the ▲/▼ cursor buttons on t[...]

61 NETWORK menu Item Description SETUP (continued) IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF . • The IP ADDRESS is the number that identifies this projector on the network. Y ou cannot have two devices with the same IP ADDRESS on the same network. • The IP ADDRESS[...]

62 NETWORK menu Item Description PROJECTOR NAME (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECT OR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. Particular projector name is pre-assigned by default. Use the ▲/▼/◄/► but[...]

63 NETWORK menu Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. T o store images in the projector , the application software PJImg/Projector Image T ool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE (  My Image Function in the User ?[...]

64 NETWORK menu Item Description PRESENT A TION Selecting this item displays the PRESENT A TION menu. Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. QUIT PRESENTER MODE If you set a computer to the Presenter mode while its image is projected, the projector is occupied by the computer an[...]

65 NETWORK menu Item Description PRESENT A TION (continued) MUL TI PC MODE (continued) • T o change from Multi PC mode to Single PC mode, select one of computers in the dialog using the ▲/▼/◄/► buttons and press the ENTER or INPUT button. Press the ► button to choose OK, and then press ENTER or INPUT again. The image for the selected co[...]

66 NETWORK menu Item Description INFORMA TION Selecting this item displays the NETWORK_INFORMA TION dialog for confirming the network settings. • For the details of P ASSCODE, see the section Selecting the network connection method in the User ’ s manual – Network Guide. • Only the first 16 characters of the projector name are displayed. ?[...]

67 SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. T o use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. Use the ▲/▼ buttons on the SECURITY menu to select ENTER P ASSWORD and press the ► bu[...]

68 SECURITY menu Item Description MyScreen P ASSWORD The MyScreen P ASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 T urning on the MyScreen P ASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen P ASSWORD and press the ► [...]

69 SECURITY menu Item Description PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 T urning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu. 1-2 Use the ▲/▼ buttons[...]

70 SECURITY menu Item Description TRANSITION DETECTOR If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal. • T o display the sign[...]

71 SECURITY menu Item Description MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT ; • The MY TEXT DISPLA Y menu will be unavailable, which can prohibit changing the DISPLA Y setting. • The MY TEXT WRITING menu will be unavailable, which can prevent the MY [...]

72 SECURITY menu Item Description MY TEXT DISPLA Y (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLA Y and press the ► or ENTER button to display the MY TEXT DISPLA Y on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLA Y on/off menu to select on or off. ON  OFF When it is set ON, the MY TEXT will be displ[...]

73 Presentation tools Presentation tools The PC-LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source. This feature allows you to make your presentations without using your com[...]

74 Presentation tools T humbnail mode PC-LESS Presentation (continued) The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen. If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select some images in the Thumbnail mode. The Thumbnail mo[...]

75 Presentation tools PC-LESS Presentation (continued) The SETUP menu for the selected image Item Functions SETUP Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute the functions as follows. RETURN Press the ► cursor button or ENTER to return to the Thumbnail screen. ST ART Switch to ON to set the select[...]

76 Presentation tools Y ou can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen Item Functions Moves to an upper folder . SORT Allows you to sort files and folders as following. RETURN Press the ► cursor button or ENTER to return to the Thumbnail scr[...]

77 Presentation tools PC-LESS Presentation (continued) • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in 1 page as maximum. • It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow , or Full Screen is displayed. • Some err[...]

78 Presentation tools PC-LESS Presentation (continued) The Full Screen mode shows a full display image. T o display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control or the INPUT button on the keypad, or click [ENTER] on the Web Remote Control. Full Screen Mode Button operation Functions[...]

79 Presentation tools PC-LESS Presentation (continued) Slidesho w mode The following operations can be accessible while the Slideshow is displayed. * These operations are not accessible while the projector OSD is displayed. • It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow , or Full Scree[...]

80 Presentation tools PC-LESS Presentation (continued) Y ou can play the Slideshow at your desired configuration. Configure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLA Y : Play the Slideshow . 3) ST ART : Set the beginning number of the Slideshow . 4) STOP : Set the end number of the Slideshow . 5) INTE[...]

81 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow . The playlist file name is “playlist.txt” and it can be edited on a computer . It is created in the folder that contains the selected image files when t[...]

82 Presentation tools USB Display The projector can display images transferred from a computer via an USB cable (  10 ). Select the USB DISPLA Y for the USB TYPE B item in the OPTION menu. When you connect your computer to the USB TYPE B port on the projector using a USB cable, the projector will be recognized as a CD-ROM drive on your computer [...]

83 Presentation tools Display : The Floating menu is displayed, and the icon disappears from the Windows notification area. Quit : The application is closed, and the icon disappears from the Windows notification area. The menu shown in the right will be displayed when you right-click the application icon in the Windows notification area. If you [...]

84 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize P erf or mance The “LiveViewer Lite for USB” captures screenshots in JPEG data and sends them to the projector . The “LiveV iewer Lite for USB” has two options that have different compression rate of JPEG data. T ransmission[...]

85 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new [...]

86 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn[...]

87 Maintenance The air filter unit of this projector consists of a filter cover , two kinds of filters, and a filter frame. The new double large filters system is expected to function longer . However , please check and clean it periodically to keep ventilation needed for normal operation of the projector . When the indicators or a message pro[...]

88 Maintenance Cleaning and replacing the air filter (continued) 9. T urn the projector on and reset the filter time using the FIL TER TIME item in the EASY MENU. ►Before taking care of the air filter , make sure the power cable is not plugged in, then allow the projector to cool sufficiently . T aking care of the air filter in a high temper[...]

89 Maintenance WARNING ►Be careful of handling a battery , as a battery can cause explosion, cracking or leakage, which could result in a fire, an injury , and environment pollution. • Use only the specified and perfect battery . Do not use a battery with damage, such as a scratch, a dent, rust or leakage. • When replacing the battery , rep[...]

90 Maintenance Other car e In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector of f, and unplug the power cord. Allow the projector to cool sufficiently . 2. After making sure that the projector is cool adequately , lightly wipe the lens with a comme[...]

91 T roubleshooting T roubleshooting If an abnormal operation should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company . They will tell you w[...]

92 Message Description The internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having confirmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C[...]

93 T roubleshooting R e gar ding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state. Please refer to the section[...]

94 HDMI USB TYPE B T roubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficient[...]

95 T roubleshooting Phenomena tha t may be easy to be mistak en f or mac hine def ects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power cord is not plugged in. Correctly connect the[...]

96 T roubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 9 ~ 13 The MUTE function is working. Restore the sound pressing MUTE or VOLUME + / - [...]

97 Phenomenon Cases not involving a machine defect Reference page Video screen display freezes. The FREEZE function is working. Press FREEZE button to restore the screen to normal. 25 Colors have a faded- out appearance, or Color tone is poor . Color settings are not correctly adjusted. Perform picture adjustments by changing the COLOR TEMP , COLOR[...]

98 Phenomenon Cases not involving a machine defect Reference page Network does not work The SA VING function is working. Select NORMAL for ST ANDBY MODE item in the SETUP menu. 41 NETWORK BRIDGE function does not work The NETWORK BRIDGE function is turned off. Select NETWORK BRIDGE for COMMUNICA TION TYPE item in the OPTION - SERVICE - COMMUNICA TI[...]

99 Specifications Specifications Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp <CP-X201 1N> 190 W UHP <CP-X251 1N, CP-X301 1N, CP-X401 1N> 210 W UHP Speaker 16 W mono ( 8 W x 2 ) Power supply/Rated current <CP-X201 1N> AC 100-120 V/ 3.2 A, AC22[...]

100 317mm 1 13mm 98mm 288mm LAN MIC HDMI USB IN1 IN2 Specifications Specifications (continued) [unit: mm] End User License Agr eement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party copyrights for each of such software modules. [...]