Honeywell 6000 manuel d'utilisation

Dolphin ™ 6000 with Windows Mobile ® 6.5 User’s Guide[...]

Disc laimer Honeyw ell Inter national Inc. (“HII”) reser ves the right to make changes in specificat ions and other inf ormation contained in th is document without prior notice, and the reader should in all case s consult HII to deter mine whether any such changes hav e been made. The inf ormation in this publication does not represent a commi[...]

iii Chapter 1 - Agency Information Label Locations ................................................. ............................................................... .... 1-1 Laser Safety Label .................................... ......................................................................... ..1-1 Laser Safety Statement .................[...]

iv Back View .................................. .................................................................................... ...... 3-4 Left View ................................ ...................................................................................... ........ 3-5 Right View ................................................... [...]

v Clock & Alarms ................................................. ................................................................ ... 7-2 Personal Menu ................................ .................................................................................. .. 7-3 Using File Explorer ................................... .............[...]

vi Connecting and Synchronizing the Terminal and Wo rkstation ............................................ 8-4 Capabilities ................................................... ................................................................ .8 - 4 Communication Types .................................. ................................ ..............[...]

vii Chapter 11 - Working with GPS Overview ................................ ....................................................................................... ..... 11-1 Assisted GPS Support ........................................ .................................. ............................. 11-1 Communication Ports .......................[...]

viii[...]

1 - 1 1 Agency Inf ormation The Dolphin 6000 mobile terminal meets or exceeds the requirem ents of all applicab le standards organizations f or saf e opera- tion. Howe v er , as with any electrical equipment, the best wa y to ensure safe operation is to operate them according to the agency guidelines that f ollow . Read the f ollowing guidelines ca[...]

1 - 2 5GHz band: UNII (Unlicensed National Inf orm ation Infrastr ucture) or band1 (5.150 to 5. 250 GHz) is restricted to indoor use only . Any other use will make the operation of the de vice illegal. F or fur ther information, please contact: Honeyw ell Imaging & Mobility Europe BV Nijverheids weg 9 5627 BT Eindhov e n The Netherlands LED Saf[...]

1 - 3 RF Exposure Inf ormation (SAR) This mobile phone meets the gov ernment's requirements for e x posure to radio wav es. This phone is designed and manuf ac- tured not to e xceed the emission limits f or exposure to r adio frequency (RF) ener gy set by the F ederal Communications Com- mission of the U .S. Go vernment. The e xposure standard[...]

1 - 4 China RoHS Operating T emperature The recommended operating temperat ure f or the ter minal is -10° C to 50°C (14°F to 122°F). Appr o v als by Country 有毒有害物质名称及含量的标识格式 (Names and Content of Ha zardous Substances or Elements) 部件名称 ( Par t s N a m e ) 有毒有害物质或元素 (T o xic and Hazardous[...]

2 - 1 2 Getting Star ted Out of the Bo x V erify that the car ton contains the follo wing items: • Dolphin 6000 mobile terminal • Battery pack (3.7V Li-ion) • Quick Start Guide Note: If you ordered accessories fo r your terminal, verify that th ey are included with the order. Be sure to keep the original packaging in case y ou need to retur n[...]

2 - 2 3. Remove the battery by lifting the tab. Note: Gentle force is required to lift and remove the battery from the battery bay. Charging the Batteries P ower f or the Dolphin 6000 ter minal comes from the bat ter y pack, which is accessed from the back panel. Bef ore Initial Use The terminals are shipped with the batter y discharged of all powe[...]

2 - 3 4. Plug the power adapter into a standard wa ll outlet. The LED on front of the term inal flashes and illuminates red when the terminal begins the initializing boot process. Booting the T erminal The terminal boots when power is applied and the PWR button is pressed f or three seconds. Caution: Do not press any keys or interr upt the boot pro[...]

2 - 4 Home Screen After the terminal initializes the first time, the Home screen appears. Navigation Bar The Navigation bar is located at the top of the scr een. The activ e program and current time are shown. Command Bar The Command bar is located at the bottom of the screen.[...]

2 - 5 Navigation Bar Icons Indicator Meaning Synchronizing data The terminal could not synchronize data with the workstation via ActiveSync. New e-mail New te xt message New v oicemail New instant message Vibrate on Ringer off Speakerphone on V oice call in progress Calls are f orwarded Call on hold Missed call Data call in progress Batter y has a [...]

2 - 6 Batter y has a low charge . Batter y has a very low charge and requires charging. The terminal is r unning on external power . If a batter y pack is installed, battery is charging in the backg round. The terminal is not connected to external powe r . A batter y is installed, but is def ective; its charge le vel cannot be measured. No SIM card[...]

2 - 7 Set Time Zone, Time , and Date 1. On the Home screen, tap the time and date section. The Clock & Alarms menu opens. 2. Select the Time tab to set the system clock. 3. Tap the Time Zone box to open a drop-down menu. Wi-Fi data call P ending alar m Bluetooth Indicator Meaning[...]

2 - 8 4. Set the correct time zone from the drop-down menu. 5. Set the correct time and date in the remaining fields and tap OK to save the settings. P op-Up Menus P op-up menus allow you to choose an action f or a selected file. 1. Tap and hold the stylus on the action to open the pop-up menu. 2. When the menu appears , lift the stylus, and tap th[...]

2 - 9 File Explorer Use the File Explorer to find and mov e files. 1. Tap > File Explorer . 2. Locate a file. 3. To move a file, hold the st ylus on the file to bring up the menu shown below. Tap Cut or Copy on the pop-up menu. 4. Navigate to the desired destination. 5. Hold the stylus in the blank area of the window. Note: If there is no blank [...]

2 - 10 7. Tap Menu on the Command bar . A pop-up menu appears. 8. Tap the down arrow on the pop-up menu to view the Edit option. 9. Tap Edit > Paste . Sear ch Phone Use the Search Phone applicatio n to quickly find inf or mation. 1. Tap > Search Phone . 2. To find a file, type the name of file in the Search For box. 3. Select the type of data[...]

3 - 1 3 Har dware Overview Standar d Configuration The f ollowing is a list of configuration f eatures: • Microsoft® Windows Mobile® 6.5 Professional • MTK MT6516 ARM9 416MHz Processor • 256MB SDRAM X 512MB Flash • 29-Key Numeric Keypad • 3.7V Li-ion rechargeable battery pack • IS4813 laser scan engine • 802.11b/g, Bluetooth, and GS[...]

3 - 2 Fr ont View Item Description F ront Speaker Receives v oice calls when using a handset. Refer to Voice Communication on page 9-3. Indicator Light Emitting Diode (LED) Flashes and illuminates during resets and scanning/imaging. Can be programmed b y various software applications . T ouch P anel Displa y A color 2.8 inch liquid crysta l display[...]

3 - 3 SCAN K ey Activates the scanner . Blue FN K ey Switches the numeric ke ypad to an alpha/numeric mode or to F1-F10 function keys m od e. P ower K ey Pressing and holding the P ower ke y for 3 seconds turns the ter minal on. Pressing and holding the P ower k ey f or 5 seconds tur ns the ter minal off. Pressing and releasing the P o wer ke y put[...]

3 - 4 Bac k View Item Description Image/Scan Engine Window The image engine reads and decodes linear , stacked lin ear (e.g., PDF417), and 1D matrix bar code symbologies. F or greater accuracy , the ter minal contains a laser aimer . Refer to Using the Scan Image Engine on page 4-1 . Rear Speaker Provides audio signals when sc anning bar code label[...]

3 - 5 Left View Color Camera Provides easy picture captio n with A utomated Camera Control (ACC). Additional f eatures include automate d picture profiles and an Application Programming Interf ace (API). Camera Flash Can be used and is contro lled b y the terminals color camera. Batter y Door Secures the Li-ion Batter y P a ck in the terminal batte[...]

3 - 6 Right View Memory Card Installation P erform the following to install the memory card: 1. Power down the terminal. 2. Unlock the battery door. 3. Remove the battery door and the battery. 4. Slide the latch toward top of terminal to unlock the SIM card. 5. Lift the SIM card latch to reveal the SIM card. 6. Remove the SIM card to re veal the me[...]

3 - 7 7. Unlock the memory card latch by s liding the latch away from serial numb er label located in the battery well. 8. Lift the latch up to expose the MicroSD or MicroSDHC socket. 9. Remove and discard SD card blank and replace with SD card to be installed. 10. Insert a microSD or microSDHC card into the microSD or microSDHC socket. Note: Make [...]

3 - 8 13. Insert the SIM card into the SIM card socket. Note: Make sure the interface on the SIM ca rd is connected to the interface in the socket. Align the chamfered corner on the card with the chamfered corner of the socket. 14. Close the SIM card latch. 15. Lock the SIM card latch by sliding the latch towards the bottom of the terminal. 16. Ins[...]

3 - 9 Bottom P anel I/O Connector The I/O connector provides the f ollowing: • Supports DC charging of the terminal and battery • Facilitates RS232 serial communications interf ace, including RX, TX, RT S, CTS and GND signals • USB interface to a host workstatio n via HomeBase or communication cable All Dolphin 6000 peripherals are designed t[...]

3 - 10 Honeyw ell also mandates use of a proper styl us, which is one that has a stylus tip r adius of no less than 0.8 mm. Use of the Honeyw ell stylus included with the ter m inal is recommended at all times. Honeyw ell warranty policy co v ers wear on the touch panel f o r the first twelv e (12) months if a screen protector is applied and an app[...]

3 - 11 1. Navigate to the Powe r Menu by selecting > Settings > System > Power . T urning T erminal On/Off T o tur n the Dolphin 6000 terminal on: 1. Press and hold the Power button for 3 seconds. Note: Turning the terminal off is the equivalent to a hard boot. T o tur n the Dolphin 6000 terminal off: 1. Press and hold the Power button for[...]

3 - 12[...]

4 - 1 4 Using the Scan Image Engine Overview The bar code engine in the Dolphin 60 00 ter minal is the Honeywell IS4813. Angled Imaging The scan engine view of field is 54 deg rees. Image Engine Specifications Laser Specifications The maximum pow er output f or each diode is: • Illumination LED: 194.0 uW Depth of Field vs. Minimum Bar Code Elemen[...]

4 - 2 Suppor ted Bar Code Symbologies Decoding Decode a Bar Code P oint the aiming beam at a bar code. The aiming beam must align with bar code f or better results. Holding the ter minal between 4-10 inches (10-25 cm) from a bar code is recommended. 1. Tap > Demos > Scan Demo . Note: You may activate the Vibrate option by selecting > Demos[...]

4 - 3 Aiming Options The aiming beam is narrower when y ou hold t he ter minal closer to a bar code and the ai ming beam is wider when you hold it far- ther from a bar code. The aiming beam must be aimed closer to symbologies that ha ve smaller bars or elements (mil siz e). The aiming beam must be aimed f ar ther from symbologies that hav e larger [...]

4 - 4[...]

5 - 1 5 Using the Camera Overview The Dolphin 6000 terminal contains a 3. 0-megapixel color camera, A utomated Camera Control (ACC) and an Application Pro- gramming Interf ace (API). The API provid es easy access to color picture and vide o capture functions. The camera lens and camera flash are located on the bac k of the terminal. T aking a pictu[...]

5 - 2 Options T ap Menu > Options . The Options men u contains f our tabs: Recor ding Video 1. Tap > Pictures & Videos > Camera > Menu > Video . 2. Point the camera lens at an object. 3. Adjust the position of the came ra lens to make sure that t he object is showing on the screen. 4. Press the Picture/Video button on the side of[...]

6 - 1 6 Using the K e ypad 29-Ke y Numeric Keypad The Dolphin 6000 terminal has a 29-key alpha/numeric k eypad. Using the Function Ke ys Name Ke y Function Backspace Mov es the cursor bac k one s pace each time the ke y is pressed. If typing te xt, it deletes the previo us char acter each time it is pressed. Enter (ENT) Confirms data entr y . Escap[...]

6 - 2 Using the Navigation K eys Located below the touch panel displa y , the navigation k eys mov es the cursor throug h te xt, icons, f olders, and application screens. Ke ypad Combinations 4-wa y Navigation K eys Mov e s the cursor left, right, up or down. Shift K ey Changes the ke yboard betw een uppercase al phabet mode and lowercase alphabet [...]

6 - 3 7 F7 pqrs 7 pqrs PQRS F7 8 F8 tuv 8 tuv TUV F8 9 F9 wxyz 9 wxyz WXYZ F9 * * 0 F10 0 F10 # ESC SP ACE # SP A CE SP ACE ESC Numeric Ke ypad Or an g e F N Key Bl ue FN Key Numeric Mode (Default) Lowercase Mode Uppercase Mode T oggle On/Off, the Off mode operates in def ault mode of Orange FN K ey[...]

6 - 4[...]

7 - 1 7 System Settings Overview The terminal settings can be changed in the Settings menu. T ap > Settings and the Settings menu opens. Settings Menu Icon Description Bluetooth Adjust Bluetooth radio settings. This icon sho ws only if the Bluetooth radio and driver are installed. See Working with Bluetooth Radio on page 10-1. Clocks & Alarm[...]

7 - 2 Cloc k & Alarms T o adjust the time and date: 1. Tap the time on the Command Bar. 2. Scroll horizont ally and tap the Clock icon. 3. Tap the Time or Date sections. OR Ta p > Settings > Clock & Alarms . The Clock & Alarms men u opens. Po w e r Se e Power on page 7-13. System Change the system settings. See System Menu on page[...]

7 - 3 4. Select the Time tab. This setting sets the system clock. 5. Tap the Time Zone box to open the drop-down menu. 6. Set the correct time zone from the drop-down menu. 7. Set the correct time and da te in the remaining fields. 8. Tap OK to save the settings. P ersonal Menu T o view the Pers o n a l Menu: 1. Tap > Settings > Personal . Ic[...]

7 - 4 Using File Explorer If a specific program is not f ound, you can either use File Explorer on the terminal to move the prog ram or ActiveSync on a workstation to create a shor tcut of a program and place the shor tcut in the Star t menu folder . Note: It is recommended that y ou Copy and Paste a shortcut so that program settings are not change[...]

7 - 5 Note: If there is no blank area in the window, tap Menu > Edit > Paste Shortcut . 6. Go to the Start menu to make sure the copied program is in the Start menu folder. Using ActiveSync on the W orkstation With ActiveSync on the w orkstation, you perf orm the same process as on the ter minal, except that the Explore utility (Windows Explo[...]

7 - 6 System Menu The system settings can be changed in the System menu. T o access the System menu: 1. Go to > Settings > System . 2. Tap an icon to open a system setting. Icon See Page About See About on page 7-7. Backlight See Backlight on page 7-7. Cer tificates See Certificates on page 7-9. Encr yption See Encryption on page 7-10. Error [...]

7 - 7 About The About menu shows inf or mation abou t the ter minal. There are f our tabs: Bac klight The Backlight menu adjusts the bac klight lev el of the screen. T o adjust the backlight le vel settings: Regional Settings See Regional Settings on page 7-14. Remov e Programs See Remove Programs on page 7-14. Screen See Screen on page 7-15. Ta s [...]

7 - 8 1. Tap > Settings > System > Backlight. There are three tabs: The options on the Batter y P ower tab and the External P ower tab are same. Batter y Po w e r Settings f or the backlight to turn off wh en the ter minal is using battery power . External Po w e r Settings f or the backlight to turn off when the terminal is using external[...]

7 - 9 Backlight Intensity In the backlight menu , tap the Brightness tab and move the slider to change the screen brightness for battery power and e xternal power settings. The def ault setting is 4. Cer tificates The Cer tificates menu sho ws cer tificates that the operating system recognizes .[...]

7 - 10 Encryption The Encr yption menu can be adjusted to encrypt files on storage cards so that thos e files cannot be read by another terminal. Err or Repor ting The Error Repor ting menu can be adjuste d to enable or disab l e the error repo r ting function of Windows Mobile 6.5.[...]

7 - 11 External GPS The External GPS menu gives y ou the option to choose a por t for a third-party GPS software application to access the GPS receiver . Note: Obtain the GPS program port from the third-party GPS software application vendor. Managed Pr ograms Managed Programs is a list of prog rams that is managed if enrolled to en terpr ise domain[...]

7 - 12 Main T ab The Main tab shows usage statistics of on-board RAM (v olatile) memor y . Columns: •S t o r a g e = FLASH memory used to store programs and program data. • Program = RAM memory used to run programs. Rows: • Total = Shows current Megabytes (M B) of memory that can be used. • In use = Shows total MB of memory being used. • [...]

7 - 13 Select memor y type from the drop-down list. • Total storage card memory = Total Megabytes (MB) of memory capacity of the Storage Card • In use = MB currently being used • Free = MB that can still be used One memor y card can be install ed in the Dolphin 6000 terminal. If a memor y card is installed in the terminal, select it in the dr[...]

7 - 14 Regional Settings Regional Settings enables y ou to customize the appearance and f ormatting to your geo graphic region. Specifically , you can cus- tomize numbers (i.e ., the number of decimal places allowed), cu rrency (i.e., using the $ symbol), time and date . These settings apply to all screens. The Region tab sho ws the region in the d[...]

7 - 15 Screen The Screen menu has three tabs: • General • ClearType •T e x t S i z e General T ab Orientation The General tab is used to set dynamic screen rota tion. There are three types of screen orientations: • Portrait • Landscape (right-handed) • Landscape (left-handed) Align Screen The General tab allows y ou to re-align the scre[...]

7 - 16 ClearT ype T ab The screen suppor ts ClearT ype font re ndering, which increases the readabi lity of te xt on LCD displa ys. T o turn on ClearT ype f ont rendering, tap Enable ClearT ype and tap OK . Note: For more information about ClearType font rendering, visit: www.microsoft.com/typograph y/WhatIsClearType.mspx. Te x t S i z e T a b The [...]

7 - 17 T ask Manager The T ask Manager displa ys inf ormation about applications and processes that are being used on terminal. Use T a sk Manager to view memory and CPU usage of applications and processes. View T ask Manager when memor y errors are received or when the terminal operation is slow . Using the T ask Manager Applications T o see the s[...]

7 - 18 4. Tap Switch To on the pop-up menu. 5. Tap and hold on an application. 6. Tap End Task or End All Tasks on the pop-up menu. Note: Stopping a program frees up RAM memory. If you stop a program in Task Manager, unsaved data in that program is lost. To make more memory avail able without the risk of data loss, return to the active program and [...]

8 - 1 8 Comm unication Connections Menu The Connections menu provides access to th e terminal’ s wireless communication options. Icon Description Beam Enables Bluetooth file tr ansf er . Connections Opens Microsoft’ s co nnections manager . Refer to Connections Manager on page 8-2. Dolphin Wireless Manager Manages the wireless radios inst alled[...]

8 - 2 Note: All server-assigned IP add resses use Dynamic Host Co nfiguration Protocol (DHCP). Connections Manager Microsoft’ s Connections Manager sets up mult iple network connections to the Inter net Ser vice Providers (ISPs) via the e xternal modem. Note: Do not enter connection paramete rs in the connections manager if: • You are using one[...]

8 - 3 My W ork Netw ork Enables y o u to establish the f ollowing connection types: • Modem • Virtual Private Network (VPN) • Proxy server connection Note: If you are connected to your ISP or private network during synchronization, the terminal downloads the proper proxy settings. If the network connection is not configured on the PC or nee d[...]

8 - 4 Enabling the Radios 1. Tap > Settings > Connections > Dolphin Wireless Manager . 2. Tap anywhere inside t he rectangle or the OFF button inside the rectangle. 3. The radio begins activating. 4. When the radio is activated (i .e., transmitting a signal), the OFF button changes to ON . Note: If applicable, information about the radio a[...]

8 - 5 Communication T ypes The Dolphin 6000 terminal suppor ts the fo llo wing type of communication via Activ e Sync or Windows Mobile De vice Center through its I/O Connector (see I/O Connector on page 3-9) on the bottom panel: USB The USB Communication Cabl e allows the terminal to co mmunicate with a workstation or be networked through a USB hu[...]

8 - 6 The most popular place to find the softwa re is on the Windows Mobile w ebsite: www .microsoft.com/windowsmobile/en-us/ downloads/def ault.mspx . Adding Pr ograms to the T erminal Using ActiveSync or Windows Mobile Device Center When selecting programs , ve rify that the program and ve rsion of the prog ram are desig ned f or Windows Mobile a[...]

8 - 7 COM P or t Assignment T able COM P or t Descr iption COM0 Not accessible COM1 GPS COM2 Bluetooth COM3 Serial P or t: RS232 Connector on the bottom panel COM4 Unused COM5 Unused COM6 Unused COM7 Unused COM8 Unused COM9 BT BTHA TCI ser v er[...]

8 - 8[...]

9 - 1 9 W orking with GSM/GPRS/EDGE Overview The Dolphin 6000 terminal is designed with an integrated, embedded GSM/GPRS/E DGE radio module f or WW AN communica- tion. Requirements Using GSM/GPRS/EDGE requires: • Network subscription to a GSM/GPRS/EDG E network (you must know what service providers are in your geographic area) • An installed SI[...]

9 - 2 SIM Car d Requirements Bef ore installing the SIM card: • The service provider must activate the SIM card. • The terminal must be turned off. Note: If no SIM card is install ed, emergency phone calls such as 9-1-1 can still be made. Installing a SIM Car d 1. Power down the terminal. 2. Unlock and remove the battery door. 3. Remove the bat[...]

9 - 3 8. Lock the SIM card latch by sliding the latch toward bottom of terminal. 9. Install the battery. 10. Install and lock the battery door. 11. Power on the terminal. Enabling the GSM Radio By def ault, the GSM radio is not enab led after a hard reset. V eri fy the status of the radio in the Dolphin Wireless Manager . Ta p > Settings > Co[...]

9 - 4 Accessing the Dialer Window Ta p > Phone or press the Green Call button. The Phone dialer opens. Dialing Once the dialer window is open, the terminal can dial two wa ys: • Use the touch screen and tap bu ttons on the dialer window. • Use the physical keypad (when keypad is in numeric mode). Sending Calls After a number is dialed, tap T[...]

9 - 5 Ending Calls While the phone call is active , tap End on the screen or press the re d end call button on k eypad. Accessing V oice Mail Ta p > Phone -> Speed Dial -> V oice Mail -> Call . Note: Update the voice mail retrieval number by turning off the terminal and then turn ing on the terminal via the Dolphin Wirele ss Manager. Se[...]

9 - 6 Sounds In the Sounds tab , ring tones, ring types, an d ke ypad sounds can be changed. Services The phone reads settings f or each ser vice on the SIM card and shows the a v ailable options from carrier .[...]

9 - 7 Network The Network tab displays options to find and set netw orks. Security Y ou can make or change a PIN on the Security tab . Data Comm unication Y ou set up data communication via the Connections Manager . The carr ier on the SIM card is the ISP . System Requirements • The GSM radio must be enabled. Refer to Enabling the GSM Radio on pa[...]

9 - 8 Inf ormation Requirements The f ollowing is required from SIM card carrier : • APN (access point name). • Username and password of account. Establishing Data Comm unication 1. Tap > Settings -> Connection -> Connections . 2. Under My ISP, tap Add a new modem connection . 3. Enter a name for connection. Select Cellular Line (GPRS)[...]

9 - 9 5. Enter an Access point name. Tap Next . 6. Enter a username and password from the account. Tap Finish .[...]

9 - 10 7. In the Connections window, tap Manage existing connections . The new connection should show on the list in the modem tab. 8. Press and hold the conn ection. A pop-up menu appears. 9. Select Connect on the pop-up menu. 10. The network icon in the navigation bar shows GSM radio is attempting to connect. Note: Data connection failure occu rs[...]

9 - 11 Ending the Data Connection The def ault setting makes the data connection disconnect after a specific amount of ti me passes without use. This amount of time is determined by the ISP . T o end data connection manually , tap the network icon in navigation bar and tap Disconnect on the pop-up men u. Manual Netw ork Selection Select either the [...]

9 - 12 a. If you selected Manual , the terminal searches for available networks. b. The available networks display.[...]

9 - 13 c. Choose a new network and tap OK . The terminal registers on the new network and the Network tab opens. d. To switch to another network, tap the Select button and the process repeats. 5. To switch back to automatic roaming, select Automatic under Select networks and tap OK .[...]

9 - 14[...]

10 - 1 10 W orking with Bluetooth Radio Enabling the Bluetooth Radio Y ou enable the Bluetooth radio in the Dolphin Wireless Manager on page 8-3. 1. T ap > Settings > Connections > on the Home screen to access the Dolphin Wireless Manager . 2. Tap anywhere inside the Bluetooth rect angle and Bluetooth begins activating. 3. When the radio i[...]

10 - 2 P airing and T rusted Devices The terminal does suppor t pairing. Pairing happens during general c onnection setup. P aired device s are "trusted" de vices. This means that there is unrestricted access to all ser vices (including ser vices th at require author ization and authentication). A connection can e xclude pairing. A device[...]

10 - 3 5. You are prompted to enter a passcode. If the de vice has a specific passcode, enter it in the P asscode field and tap Next . When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode ma y def ault to either 1111 or 0000. If there is no def ault, consult the de vice literature f or the number . If the de [...]

10 - 4 If you are connecting to a printer or headset, complete any additional steps required b y de vice. 11. After the passcodes have been ac cepted on both sides, you hav e a trusted (paired) connection. T ransferring Files 1. Tap > File Explorer . 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File o[...]

10 - 5 4. The Bluetooth radio begins searching for devices. 5. Tap the device to begin sending the selected file. 6. While trying to connect, the se lected device reads “Pending”. 7. When the file is being transferred, the selected device reads “Sending”. Making the T erminal Disco verable By def ault, the Dolphin ter minal is not di scov e[...]

10 - 6 2. Select Make this device visible to other devices and tap OK . Selecting COM P or ts Y ou can select COM por ts 0- 9. F or more info r mation, COM Port Assignment Table , page 8-7.[...]

11 - 1 11 W orking with GPS Overview The Dolphin 6000 terminal contains an in tegrated GPS module that allo ws location tracking of w orkers and v ehicles, providing better utilization of field assets. Optional mapping and na vigation software provides turn-by-turn driving directions and locat ion inf orm ation. Assisted GPS Suppor t The operating [...]

11 - 2[...]

12 - 1 12 Dolphin 6000 HomeBase Overview The Dolphin 6000 HomeBase suppor ts both RS232 and USB communications, which mak es it able to connect with majority of PC-based enter prise systems. Capacity The HomeBase holds one Dolphin 6000 termin al and has an auxiliar y batter y well beh ind the ter minal well. The HomeBase can charge two battery pack[...]

12 - 2 P ar ts and Functions Front P anel T erminal W ell Place the Dolphin 6000 in the term inal well to use the ter minal and to charge a batter y pack in the terminal. The HomeBase charges the batter y in 4 hours. If the host terminal is a workstation that us es ActiveSync, synchronization begins immedi- ately . A UX Battery Status LED The A UX [...]

12 - 3 Back P a nel A uxiliar y Battery We ll The HomeBase can charge an additional Li-ion batter y pack in 4 hours in the well behind t he terminal. This feature ensures that you can alw a ys hav e an additional fully-c harged batter y for Dol phin 6000 terminal. See Charging a Battery in the Auxiliary Battery Well on page 12-5. USB P or t This US[...]

12 - 4 Note: Signals referenced are for a DTE device. The HomeBase is at a right-angle to the printed circuit board (PCB). Charging the Battery The HomeBase powers the terminal and charges its batter y pack in 4 hours . The cradle knows when battery pack is full y charged and automatically changes to a trickle charge that k eeps the batter y at ful[...]

12 - 5 Ensure all components are dr y prior to mating ter minals/batte ries with per ipheral de vices. Mating wet components ma y cause damage not cov e red by the w arranty . Charging a Battery in the A uxiliar y Battery W e ll The auxiliar y batter y well located on the back of the HomeBase charges a spare bat tery independently of the ter minal [...]

12 - 6 Connecting the Comm unication Cables 1. Plug in the power suppl y and connect it to the back of the HomeBase. 2. Plug the USB or RS232 communication cable into back of the HomeBase. 3. Connect the communication cable in to the back of the workstation. Note: At this point, the hardware is installed and operati ng. For USB communication, the w[...]

13 - 1 13 Customer Suppor t T echnical Assistance If you need assistance installing or troub leshooting yo ur de vice, please contact us by using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base pro vides thousands of immediat e solutions. If the Kno wledge Base cannot help, our T echnical Suppor t P or tal (see[...]

13 - 2 Hong Kong Telephone: +852-29536436 Fax: +852-2511-3557 E-mail: apservice@honeywell.com Singapore Telephone: +65-6842-7155 Fax: +65-6842-7166 E-mail: apservice@honeywell.com China Telephone: +86 800 828 2803 Fax: +86-512-6762-2560 E-mail: apservice@honeywell.com Japan Telephone: +81-3-6730-7344 Fax: +81-3-6730-7222 E-mail: apservice@honeywell[...]

13 - 3 CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON CONTRA CT , W ARRANTY , T OR T , OR O THERWISE) EXCEED THE A CTU AL AMOUNT P AID TO HII FOR THE PR ODUCT . THESE LIMIT A TIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WH EN HII MA Y HA VE BEEN AD VISED OF THE POS- SIBILITY OF SUCH [...]

13 - 4[...]

[...]

™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 6000-UG Rev C 3/12[...]