HP (Hewlett-Packard) 3100 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 98 pages
- 2.67 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Laptop
HP (Hewlett-Packard) A1280
195 pages 1.97 mb -
Laptop
HP (Hewlett-Packard) dv 9000
303 pages 3.72 mb -
Laptop
HP (Hewlett-Packard) A6034
195 pages 1.97 mb -
Laptop
HP (Hewlett-Packard) A6X41UA
118 pages 3.46 mb -
Laptop
HP (Hewlett-Packard) 4100
88 pages 1.6 mb -
Laptop
HP (Hewlett-Packard) C9K60UT#ABA
145 pages 5.87 mb -
Laptop
HP (Hewlett-Packard) 6440B
42 pages 2.33 mb -
Laptop
HP (Hewlett-Packard) A6X41UAR#ABA
59 pages 1.84 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation HP (Hewlett-Packard) 3100. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel HP (Hewlett-Packard) 3100 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation HP (Hewlett-Packard) 3100 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation HP (Hewlett-Packard) 3100 devrait contenir:
- informations sur les caractéristiques techniques du dispositif HP (Hewlett-Packard) 3100
- nom du fabricant et année de fabrication HP (Hewlett-Packard) 3100
- instructions d'utilisation, de réglage et d’entretien de l'équipement HP (Hewlett-Packard) 3100
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage HP (Hewlett-Packard) 3100 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles HP (Hewlett-Packard) 3100 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service HP (Hewlett-Packard) en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées HP (Hewlett-Packard) 3100, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif HP (Hewlett-Packard) 3100, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation HP (Hewlett-Packard) 3100. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
® HP OmniBook 2100/3000/3100 Service Manual[...]
-
Page 2
ii HP OmniBook 2100/3000/3100 Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty o[...]
-
Page 3
HP OmniBook 2100/3000/3100 iii Contents 1. Product Information .................................................................................................. 1-1 Features and Operation ......................................................................................................... ......... 1-2 Turning the OmniBook On and Off .........[...]
-
Page 4
iv HP OmniBook 2100/3000/3100 Figures Figure 1-1. OmniBook - Front View .............................................................................................. ...... 1-2 Figure 1-2. OmniBook - Side View ............................................................................................... ...... 1-2 Figure 1-3. OmniBook - Back View[...]
-
Page 5
HP OmniBook 2100/3000/3100 v Table 2-2. Required Equipment .................................................................................................. ......... 2-2 Table 2-3. Recommended Screw Torques ........................................................................................... 2-2 Table 2-4. Hard Disk Drive Replacement Part N[...]
-
Page 6
vi HP OmniBook 2100/3000/3100 Introduction This service manual provides reference information for the HP OmniBook 2100/3000/3100. It is intended to be used by HP-authorized service personnel in the installation, servicing, and repair of these products. The manual is designed as a self-paced guide. It is intended to train you to install, configure, [...]
-
Page 7
HP OmniBook 2100/3000/3100 Product Information 1-1 1 Product Information The HP OmniBook 2100/3000/3100 represents a category of HP notebook computers featuring the latest mobile technologies. They use high-speed Intel Pentium processors with MMX technology, large 12.1-inch and 13.3-inch displays, and high-capacity hard drives. Table 1-1. OmniBook [...]
-
Page 8
1-2 Product Information HP OmniBook 2100/3000/3100 Features and Operation The following three illustrations point out the main external features of the computer. They are followed by highlights of the computer’s operation. For an internal, exploded view, see page 4-2. Figure 1-1. OmniBook - Front View Figure 1-2. OmniBook - Side View Microphone S[...]
-
Page 9
HP OmniBook 2100/3000/3100 Product Information 1-3 Figure 1-3. OmniBook - Back View Table 1-2. Product Comparisons OmniBook 2100/3100 OmniBook 3000 OmniBook 4100 OmniBook 7100 Processor * Pentium (266, 233, or 200 MHz), with MMX technology. 512-KB burst-synchronous L2 cache. Pentium (266, 233, or 200 MHz), with MMX technology. 512-KB burst-synchron[...]
-
Page 10
1-4 Product Information HP OmniBook 2100/3000/3100 Turning the OmniBook On and Off • On. Press the blue power button to turn on the OmniBook. • Standby. The display turns off automatically if the computer is inactive for about 2 minutes. • Suspend. Click Start, Suspend (Windows 95) or press the blue power button briefly (about 1 second) to su[...]
-
Page 11
HP OmniBook 2100/3000/3100 Product Information 1-5 Checking the Status of the OmniBook The OmniBook status panel, located above the keyboard (on the icon PCA), contains indicators that show the current status of the OmniBook. The indicators in the status panel show keyboard status, drive status, and power status. Table 1-4. Status Panel Indicators [...]
-
Page 12
1-6 Product Information HP OmniBook 2100/3000/3100 The green power light in the hinge area (located on the icon PCA) indicates the power state. The green lights on the main battery or secondary battery indicate its charge level. Table 1-5. Indicator Lights (Icon PCA and Battery) Light Meaning OmniBook 2100/3100: Power Light Steady green light Blink[...]
-
Page 13
HP OmniBook 2100/3000/3100 Product Information 1-7 Resetting the OmniBook 1. Use a pen or a straightened paper clip to push the system-off button in the hole on the back panel. (The switch is on the motherboard.) –or– Press the blue power button until the display shuts down. (The switch is on the icon PCA.) 2. After the computer shuts down, pre[...]
-
Page 14
1-8 Product Information HP OmniBook 2100/3000/3100 System Resources Below are default values for system resources. To see other, non-default possibilities, use the BIOS Setup utility (see page 3-22), which lists port and audio device configurations in the System Devices menu. The tables in this section show typical resource usage as set up by the O[...]
-
Page 15
HP OmniBook 2100/3000/3100 Product Information 1-9 Table 1-9. System Input/Output Addresses (100-3FF) 170-177 Internal CD-ROM drive (secondary IDE controller) 1F0-1F7 Internal hard disk (primary IDE controller) 200-207 OmniBook 3000: Joystick 220-22F Crystal sound 376 Internal CD-ROM drive (secondary IDE controller) 378-37F LPT1 (printer port) 388-[...]
-
Page 16
1-10 Product Information HP OmniBook 2100/3000/3100 Specifications The following tables list specifications for the OmniBook and its accessories. Table 1-11. HP OmniBook 2100/3000/3100 Specifications Physical Attributes OmniBook 2100: Size: 29.9 × 23.7 × 4.6 cm (11.7 × 9.2 × 1.8 in) closed. Weight: 2.9 kg (6.4 lb). OmniBook 3000: Size: 30.3 × [...]
-
Page 17
HP OmniBook 2100/3000/3100 Product Information 1-11 Audio System 16-bit, Sound Blaster Pro-compatible. Stereo sound via two built-in speakers. Built-in microphone. Line-in, line-out, and microphone-in. 3D enhanced audio. MIDI support with optional port replicator (OmniBook 3000 only). Keyboard and Pointing Device 87/88-key touch-type full-size QWER[...]
-
Page 18
1-12 Product Information HP OmniBook 2100/3000/3100 Major ICs OmniBook 2100/3100: CPU: Intel Mobile Pentium. South Bridge: PIIX4. Video: NeoMagic NM2160 (NMG4). Audio: Crystal CS4237B. CardBus: TI PCI1220. Keyboard controller: National PC87570. Super I/O: SMC 669FR. OmniBook 3000: CPU: Intel Mobile Pentium. South Bridge: PIIX4. Video: NeoMagic NM21[...]
-
Page 19
HP OmniBook 2100/3000/3100 Product Information 1-13 Table 1-12. HP OmniBook 2100/3000/3100 Accessories OmniBook 3000-Only Accessories F1381A F1369A F1387A F1377A F1379A Port replicator. Monitor stand. 20X CD-ROM drive module. AC adapter. Automobile adapter. OmniBook 2100/3100-Only Accessories F1587A F1589A F1588A 24X CD-ROM drive module. Nickel-met[...]
-
Page 20
1-14 Product Information HP OmniBook 2100/3000/3100 Internal Design The motherboard PCA is the central component of the OmniBook design. It plays a role in virtually all system functions. The CPU module (MMO) and all other subsystems connect to the motherboard. The following figure shows the connections among the replaceable electrical modules. As [...]
-
Page 21
HP OmniBook 2100/3000/3100 Product Information 1-15 Table 1-13. Functional Structure Function Modules Roles Bootup CPU module Motherboard System BIOS IC** Keyboard BIOS IC** Floppy disk drive Hard disk drive Main processor (MMO). Primary system circuitry. Code for basic system functions. Code for keyboard functions. First source of disk-based start[...]
-
Page 22
[...]
-
Page 23
HP OmniBook 2100/3000/3100 Removal and Replacement 2-1 2 Removal and Replacement This chapter tells you how to remove and replace the following components and assemblies. The ones marked by • are user-replaceable. Table 2-1. Removal Cross-Reference • Battery (page 2-3). Bezel, display (table on page 2-29). Bracket, display (page 2-15 and 2-17).[...]
-
Page 24
2-2 Removal and Replacement HP OmniBook 2100/3000/3100 Table 2-2. Required Equipment • Small Phillips screwdriver, preferably magnetized. • 5 mm hex driver. • Pointed knife or probe. • Three small flat-blade screwdrivers (or equivalent tools for prying). • IC insertion/removal tool. Table 2-3. Recommended Screw Torques Screw Thread Size T[...]
-
Page 25
HP OmniBook 2100/3000/3100 Removal and Replacement 2-3 Removing the Main Battery (User-Replaceable) The main battery is located under the right corner of the palmrest. To remove a secondary battery (an accessory plug-in module), see the next topic below. WARNING Do not mutilate, puncture, or dispose of batteries in fire. A battery can burst or expl[...]
-
Page 26
2-4 Removal and Replacement HP OmniBook 2100/3000/3100 Removing a Plug-In Accessory Module (User-Replaceable) Note Plug-in accessory modules have no repairable components. A defective module must be exchanged. Required Equipment • None. Removal Procedure 1. Slide the safety latch for the plug-in slot into its recess. 2. Slide and hold the release[...]
-
Page 27
HP OmniBook 2100/3000/3100 Removal and Replacement 2-5 Removing the Hard Disk Drive (User-Replaceable) Table 2-4. Hard Disk Drive Replacement Part Numbers Description Part Number Exchange OmniBook Part Number 2100 3100 3000 Drive, hard disk (2.1GB, 12.7mm, IBM) 0950-2801 F1580-69100 •• Drive, hard disk (3.2GB, 9.5mm, IBM) 0950-2802 F1348-69103 [...]
-
Page 28
2-6 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-4. Installing a Hard Drive in the Case Reassembly Notes Caution • Use a HDD case kit that is compatible with the thickness of the drive, 9.7 mm or 12.7 mm . • OmniBook 2100/3100: The hard drive in an OmniBook 2100 or 3100 must have a metal shield. If an older HDD case kit does not [...]
-
Page 29
HP OmniBook 2100/3000/3100 Removal and Replacement 2-7 4. When prompted, select “Create Hibernate Partition.” OmniBook 2100/3100: We recommend that you create a 96-MB partition, the same as the factory setup. OmniBook 3000: We recommend that you create a 144-MB partition, the same as the factory setup. Removing a RAM Board (User-Replaceable) Ta[...]
-
Page 30
2-8 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-6. Removing a RAM Board Reassembly Notes • Insert the RAM board into the connector at about a 30° angle until it is fully inserted. Then press down at both sides until both latches snap closed. • Place the RAM cover about 3 mm from its closed position, then slide it closed. Replac[...]
-
Page 31
HP OmniBook 2100/3000/3100 Removal and Replacement 2-9 Removing the Display Assembly (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver, preferably magnetized. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. 2. Remove the floppy drive or other plug-in module (see page 2-4). 3. Op[...]
-
Page 32
2-10 Removal and Replacement HP OmniBook 2100/3000/3100 8. For the inverter/MB cable emerging from the right hinge, unplug the cable from the motherboard. 9. Remove the four screws from the hinges, and lift off the display assembly. Figure 2-8. Removing the Icon PCA and Display Assembly Reassembly Notes • After connecting the inverter/MB cable fr[...]
-
Page 33
HP OmniBook 2100/3000/3100 Removal and Replacement 2-11 Removing the LCD Module (HP Authorized Service Providers Only) Note The exact details for removing the LCD module depend on the type of module. Some details may differ from those described below. See the table below for information about matching components for different types of LCD modules. [...]
-
Page 34
2-12 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-9. Removing the Hinge Covers and Icon Window Cover 6. Pry off the two screw covers by the hinges (use a pointed knife or probe), then remove the two screws. For a 12-inch display, pry off the two display bumpers at the top of the display, then remove the two additional screws. Icon Wi[...]
-
Page 35
HP OmniBook 2100/3000/3100 Removal and Replacement 2-13 7. Starting at the left side of the display, use your fingers to gently pull the display bezel toward the edge of the display case until the snaps release. As the snaps release, work your way up the left side, across the top, and down the right side—until only the bottom edge is attached. Fi[...]
-
Page 36
2-14 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-11. Removing the 12" LCD Module Figure 2-12. Removing the 13" LCD Module Screw, M3×5mm (4) LCD Module EPE Foam (may be 3 pieces) LCD Flex Cable Screw, M3×5mm (4) LCD Module LCD Flex Cable[...]
-
Page 37
HP OmniBook 2100/3000/3100 Removal and Replacement 2-15 Reassembly Notes Caution Be sure to replace the LCD module or other display components with compatible parts. Components may be damaged if compatible parts are not used. See the table above. • Secure the LCD flex cable to the LCD module with a piece of Kapton tape next to the LCD connector. [...]
-
Page 38
2-16 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-13. Removing a 12" Display Case and Display Bracket Reassembly Notes Caution Be sure to replace display components with compatible parts. Components may be damaged if compatible parts are not used. See the table on page 2-11. • The inverter PCA fits onto the two plastic pins in[...]
-
Page 39
HP OmniBook 2100/3000/3100 Removal and Replacement 2-17 Removing a 13" Display Case or Display Bracket (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver, preferably magnetized. • Pointed knife or probe. • Three small flat-blade screwdrivers (or equivalent tools for prying). Removal Procedure 1. Unplug[...]
-
Page 40
2-18 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-14. Removing a 13" Display Case and Display Bracket Reassembly Notes Caution Be sure to replace display components with compatible parts. Components may be damaged if compatible parts are not used. See the table on page 2-11. • Before you install the display bracket, secure the[...]
-
Page 41
HP OmniBook 2100/3000/3100 Removal and Replacement 2-19 Removing the Keyboard (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver, preferably magnetized. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. 2. Remove the floppy drive or other plug-in module (see page 2-4). 3. Open the [...]
-
Page 42
2-20 Removal and Replacement HP OmniBook 2100/3000/3100 Figure 2-16. Removing the Keyboard Reassembly Notes Important After inserting the keyboard into the case, make sure the back edge of the keyboard is underneath the four plastic tabs on the case–you should see a small gap between the front of the keyboard backplate and the top case. Hint: Ins[...]
-
Page 43
HP OmniBook 2100/3000/3100 Removal and Replacement 2-21 • Floppy drive or other plug-in module (see page 2-4). • Hard drive (see page 2-5). • Display assembly (see page 2-9). • Keyboard (see page 2-19). 3. Remove the heatsink by doing the following: • Remove the three recessed screws from the heatsink. Note: Do not remove the two middle s[...]
-
Page 44
2-22 Removal and Replacement HP OmniBook 2100/3000/3100 4. Unplug the speaker/touch-pad cable from the motherboard. (See the picture below.) 5. Turn the unit bottom side up and remove the five bottom case screws. Two of the five screws are hidden at the front corners inside the battery and hard drive slots. 6. Turn the unit face up and remove the s[...]
-
Page 45
HP OmniBook 2100/3000/3100 Removal and Replacement 2-23 7. Lift up along the back edge of the top case until that edge is free. 8. Place your thumbs on the front of the bottom case and your fingertips wrapped around the back of the palmrest. Lift the back of the top case about 4 cm, then gently but firmly pinch the case forward—until the four sna[...]
-
Page 46
2-24 Removal and Replacement HP OmniBook 2100/3000/3100 Removing the Motherboard or Bottom Case (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver, preferably magnetized. • 5 mm hex driver. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. 2. Remove these additional assemblies: ?[...]
-
Page 47
HP OmniBook 2100/3000/3100 Removal and Replacement 2-25 7. Lift the hard drive housing only until the PCMCIA pushbuttons clear the bottom case. Then gently work the motherboard forward until the I/O bracket slips free. The audio jack cover is released when you remove the motherboard. Figure 2-21. Removing the Motherboard Reassembly Notes Note: Inst[...]
-
Page 48
2-26 Removal and Replacement HP OmniBook 2100/3000/3100 Note: Installing a New Bottom Case • Transfer these parts from the old bottom case to the new one: Plastic parts (I/O door, RAM cover). Lock plate and IR lens, if not included with new case (see Figure 2-21). • Install new regulatory and serial-number labels on the bottom case—see the st[...]
-
Page 49
HP OmniBook 2100/3000/3100 Removal and Replacement 2-27 3. Store the serial number: If you are prompted for the serial number, type the serial number shown on the bottom of the case. If a serial number has already been stored, you must call an HP support center to change it. Installing New Regulatory and Serial-Number Labels — OmniBook 2100/3100 [...]
-
Page 50
2-28 Removal and Replacement HP OmniBook 2100/3000/3100 Required Equipment • Small flat-blade screwdriver. • IC insertion/removal tool. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. 2. On the bottom of the unit, insert a flat-blade screwdriver into the slot at the edge of the BIOS cover and pry it off. 3. Use a[...]
-
Page 51
HP OmniBook 2100/3000/3100 Removal and Replacement 2-29 Reassembly Notes Caution Align the IC with the slot in the socket. The IC is keyed to fit correctly. If you insert the IC backward, the IC or motherboard could be damaged. • Press down firmly on the IC with your thumb to ensure a proper connection. • Reprogram the IC by programming the BIO[...]
-
Page 52
2-30 Removal and Replacement HP OmniBook 2100/3000/3100 Component Removal Procedures Additional Steps Cable, LCD flex (12-inch display) Plug-in module (page 2-4). Display (page 2-8). LCD module (page 2-11). Reassembly Notes: The notched end of the metal tube fits under the display bracket, and the tab on the side fits inside the hinge opening. The [...]
-
Page 53
HP OmniBook 2100/3000/3100 Removal and Replacement 2-31 Component Removal Procedures Additional Steps Latch, Display (or Spring) Plug-in module (page 2-4). Hard drive (page 2-5). Display (page 2-8). Keyboard (page 2-19). Top case (page 2-20). To remove, lift the left corner. Reassembly Notes: Put the spring on the latch shaft, then insert the shaft[...]
-
Page 54
2-32 Removal and Replacement HP OmniBook 2100/3000/3100 Component Removal Procedures Additional Steps PCA, USB Plug-in module (page 2-4). Hard drive (page 2-5). Display (page 2-8). Keyboard (page 2-19). Top case (page 2-20). Motherboard, but only until the USB PCA is removed (page 2-23). The motherboard does not have to be removed. Plate, Lock Plug[...]
-
Page 55
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-1 3 Troubleshooting and Diagnostics This chapter includes troubleshooting and diagnostic information for testing the functionality of the OmniBook and identifying faulty modules: • Troubleshooting information Troubleshooting the problem (page 3-2). Verifying the repair (page 3-3). Sugge[...]
-
Page 56
3-2 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Troubleshooting The suggestions in this section can help isolate and repair the cause of a problem. To ensure quality repair, HP recommends that you follow the basic troubleshooting steps shown in the illustration below. Figure 3-1. Basic Troubleshooting Steps Troubleshooting the Proble[...]
-
Page 57
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-3 • Separate Problems. If there is more than one symptom, separate them into distinct problems. • Consider Causes. Keep in mind possible causes for each problem. Use the diagnostic tools and troubleshooting suggestions to help find possible causes. The OmniBook diagnostic program is t[...]
-
Page 58
3-4 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Suggestions for Troubleshooting Table 3-1. Scope of Diagnostic Tools Function OmniBook Diagnostics Power-On Self-Test Sycard PCCtest 450 DMI/TopTools ‡ (if installed) BIOS Setup Bootup Tests Describes (SafeTools) Configures Processor Tests (System menu) Tests Describes (AssetTools) Me[...]
-
Page 59
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-5 If you can’t isolate the cause of a problem using the diagnostic tools, you can use the suggestions in the following table to help find the problem. Table 3-2. Troubleshooting Suggestions Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments To help det[...]
-
Page 60
3-6 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Password has been forgotten Verify proper ownership, then follow the removal procedure with the owner and log the appropriate data—see page 5-1. An OmniBook 3000 may have to be shipped to an HP servi[...]
-
Page 61
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-7 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Hard disk Hard disk never spins Check the power source. Remove and reinsert the hard drive. Check the contacts. Hard drive or contacts. Motherboard. Hard drive case (flex cable). If the drive case is d[...]
-
Page 62
3-8 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Touch pad General problems Check settings in Control Panel. Touch-pad PCA. Top case. Motherboard. Special touch pad driver features not working In Mouse Properties, select the TouchPad mouse type. Run [...]
-
Page 63
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-9 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments USB General problems USB is not supported in Windows N T 4. 0 . USB PCA. Motherboard. Check for bent pins and misaligned connectors for the USB PCA. If USB works on a docking product, replace the USB P[...]
-
Page 64
3-10 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Symptom Call Center: Suggestions Repair Center: Likely Causes Repair Center: Comments Computer pauses or runs sluggishly May be normal Windows behavior (background processing can affect response time). If the hard disk has spun down to conserve power, it can take several seconds to spi[...]
-
Page 65
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-11 Diagnostic Tools This section describes the following diagnostic tools you can use for troubleshooting and repairing the OmniBook: • OmniBook hardware diagnostic program (page 3-11). • Power-on self-test (page 3-16). • Sycard PCCtest 450 PC Card (page 3-16). • Desktop Managemen[...]
-
Page 66
3-12 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 • On any computer with a CD-ROM drive, run diaginst from the OmnibookDmiHpdiags directory on the Recovery CD for the computer model you are repairing (OmniBook 2100/3100 or OmniBook 3000). • On any computer with World Wide Web access, download the diagnostic software package fro[...]
-
Page 67
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-13 12. Optional: Check the log. On any computer, open the HPSUPPT.TXT log file on the diagnostic disk using Notepad or other text editor. It contains a hardware summary and a list of all test results and errors. Note that the serial and parallel port tests are more thorough if you connect[...]
-
Page 68
3-14 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 0120h - 0150h For 00FFFFFFh (OmniBook 3000) or 01FFFFFFh (OmniBook 2100/3100) and below, replace the motherboard. Above that value, replace the corresponding RAM board (each 01000000h represents 16MB). 0160h Address bus short. Remove any RAM boards and rerun the test. Check the CPU mod[...]
-
Page 69
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-15 0603h For the external loopback test, make sure the loopback connector is installed and constructed properly. For the external or internal loopback test, replace the motherboard. 0604h - 0605h Replace the motherboard. 0606h For the external loopback test, make sure the loopback connect[...]
-
Page 70
3-16 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 9009h Do not run this test in Windows. For the one- unit test, replace the motherboard. For the two- unit test, make sure the IR ports on the reflector and test computers are lined up, replace the IR PCA, replace the motherboard. 900Ah Rerun the test. For the two-unit test, make sure t[...]
-
Page 71
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-17 Table 3-5. POST Messages Message Description 0200 Failure Fixed Disk Fixed disk is not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out if the fixed-disk type is correctly identified. 0210 Stuck key Stuck key on keyboard. 0211 Key[...]
-
Page 72
3-18 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Message Description 02F7: Fail-Safe Timer NMI Failed ServerBIOS2 test error: Fail-Safe Timer takes too long. device Address Conflict Address conflict for specified device. Allocation Error for: device Run ISA or EISA Configuration Utility to resolve resource conflict for the specified [...]
-
Page 73
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-19 Sycard PCCtest 450 CardBus Card (Optional) The PCCtest 450 CardBus Card (version 1.05 required for the OmniBook 2100/3100) available from Sycard Technology is an optional diagnostic tool. It is the only recommended tool that tests the functionality of the PCMCIA slots. It is a Type II [...]
-
Page 74
3-20 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Desktop Management Interface (DMI) The Desktop Management Interface (DMI) is basically a set of rules for accessing information about a personal computer. Using DMI, an application program can determine, for example, which hardware and software components are present in a personal comp[...]
-
Page 75
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-21 Hewlett-Packard has developed a number of extensions to DMI to allow the enhanced features of HP OmniBook computer to be managed with DMI, including features such as passwords and tattooing (identifying a computer using a unique string of characters). For full details of the structure [...]
-
Page 76
3-22 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 BIOS Setup Utility The BIOS Setup utility provides access to basic configuration settings. It is independent of the operating system. Running the BIOS Setup Utility 1. Close all applications, then shut down Windows and reboot the OmniBook. If necessary, you can press CTRL+ALT+DEL to re[...]
-
Page 77
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-23 Serial Port Sets how the serial port is configured by the BIOS (specified or automatic). Enabled Base I/O address Sets the I/O address and interrupt. 3F8h, IRQ4 (COM1) Infrared Port Sets how the infrared port is configured by the BIOS (specified or automatic). Disabled Mode Sets the ha[...]
-
Page 78
3-24 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Resume If boot security is enabled, sets whether a user password is required when resuming from a suspended state. OB 2100/3100: Enabled OB 3000: Disabled OmniBook 2100/3100: Undock If boot security is enabled, sets whether a user password is required when undocking the OmniBook. Disab[...]
-
Page 79
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-25 Exit Menu Save Changes and Exit Saves Setup changes, exits, and reboots. Discard Changes and Exit Discards Setup changes since last save, exits, and reboots. Does not affect Security and date/time changes. Get Default Values Restores default settings, stays in Setup. Does not affect Se[...]
-
Page 80
[...]
-
Page 81
HP OmniBook 2100/3000/3100 Replaceable Parts 4-1 4 Replaceable Parts This chapter contains an exploded view of the OmniBook and the following lists of parts: • OmniBook replaceable parts (page 4-3). • Assembly-component breakout (page 4-6) • Accessory replacement parts (page 4-7). • Part number reference (page 4-8).[...]
-
Page 82
4-2 Replaceable Parts HP OmniBook 2100/3000/3100 Figure 4-1. Exploded View Note: 13-inch display shown. To see 12-inch display parts, see chapter 2.[...]
-
Page 83
HP OmniBook 2100/3000/3100 Replaceable Parts 4-3 Table 4-1. OmniBook Replaceable Parts Description Part Number Exchange User OmniBook Part Number Repl. 2100 3100 3000 1 Battery, main (lithium-ion) F1382-60901 Yes ••• 1 Battery, main (nickel-metal-hydride) F1589-60901 Yes •• 2 Bezel, display (12" TFT and DSTN) * F1580-60911 • 2 Beze[...]
-
Page 84
4-4 Replaceable Parts HP OmniBook 2100/3000/3100 Description Part Number Exchange User OmniBook Part Number Repl. 2100 3100 3000 Foam, EPE (13" TFT) F1391-60926 ••• Foot, rubber F1580-60932 Yes •• Foot, rubber F1391-60931 Yes • 22 Heatsink, CPU F1391-60921 ••• 23 Hinge, display (12" TFT and DSTN) F1580-60910 • 23 Hinge[...]
-
Page 85
HP OmniBook 2100/3000/3100 Replaceable Parts 4-5 Description Part Number Exchange User OmniBook Part Number Repl. 2100 3100 3000 28 PCA, inverter (12" TFT and DSTN) F1580-60905 • 28 PCA, inverter (13" TFT) * F1391-60908 • 28 PCA, inverter (13" TFT) * F1580-60904 • 29 PCA, IR F1391-60912 ••• 30 PCA, LVDS F1391-60904 ••[...]
-
Page 86
4-6 Replaceable Parts HP OmniBook 2100/3000/3100 Table 4-2. Assembly-Component Breakdown Assembly Part Number OmniBook Component Part Number Incl. 2100 3100 3000 Bezel, display (12") F1580-60911 • Bumper, display (2) F1580-60909 No Cover, screw (2) F1391-60923 No Bezel, display (13") F1391-60927 •• Bumper, display (2) F1391-60924 Ye[...]
-
Page 87
HP OmniBook 2100/3000/3100 Replaceable Parts 4-7 Table 4-3. Accessory Replaceable Parts Description Part Number Exchange User OmniBook Part Number Repl. 2100 3100 3000 Adapter, ac (45W) F1377-60901 Yes • Adapter, ac (60W) 0950-2790 Yes •• Adapter, auto F1379-60901 Yes • Adapter, auto plug (from airline) 5182-5131 Yes •• Adapter, auto/ai[...]
-
Page 88
4-8 Replaceable Parts HP OmniBook 2100/3000/3100 Table 4-4. Part Number Reference Part Number Exchange Description User OmniBook Part Number Repl. 2100 3100 3000 Label, regulatory (OB2100) • Label, regulatory (OB3100) • 0515-2699 Screw, M2.5×4mm ••• 0950-2671 F1386-69100 Drive, hard disk (4.0GB, IBM) •• 0950-2790 Adapter, ac (60W) Ye[...]
-
Page 89
HP OmniBook 2100/3000/3100 Replaceable Parts 4-9 Part Number Exchange Description User OmniBook Part Number Repl. 2100 3100 3000 F1391-60912 PCA, IR ••• F1391-60913 Case, bottom • F1391-60914 Cable, icon/MB ••• F1391-60915 Cable, IR/icon ••• F1391-60916 Fan ••• F1391-60917 Thermal kit ••• F1391-60918 IC, keyboard BIO[...]
-
Page 90
4-10 Replaceable Parts HP OmniBook 2100/3000/3100 Part Number Exchange Description User OmniBook Part Number Repl. 2100 3100 3000 F1391-60959 Cable, inverter/MB (13" TFT) • F1391-60960 Bumper, inverter • F1391-60961 Cable, LCD flex (13" TFT) •• F1391-60962 Bracket, display (13" TFT) •• F1391-60965 Recovery CD, English (OB[...]
-
Page 91
HP OmniBook 2100/3000/3100 Replaceable Parts 4-11 Part Number Exchange Description User OmniBook Part Number Repl. 2100 3100 3000 F1580-60932 Foot, rubber Yes •• F1580-60934 PCA, touch-pad ••• F1580-60935 Bumper, audio •• F1580-60936 Card, business Yes •• F1580-60937 Overlay, business card •• F1580-60938 Recovery CD, English ([...]
-
Page 92
[...]
-
Page 93
HP OmniBook 2100/3000/3100 Reference Information 5-1 5 Reference Information This chapter includes the following reference information: • Password removal policy. • Display quality statement. Password Removal Policy If the user forgets the system password, the user calls Technical Support to determine the proper removal procedure. For the OmniB[...]
-
Page 94
5-2 Reference Information HP OmniBook 2100/3000/3100 Hewlett-Packard Display Quality Statement TFT display manufacturing is a high precision but imperfect technology and manufacturers cannot currently produce large displays that are cosmetically perfect. Most, if not all, TFT displays will exhibit some level of cosmetic imperfection. These cosmetic[...]
-
Page 95
HP OmniBook 2100/3000/3100 Reference Information 5-3 Table 5-1. OmniBook 2100/3000/3100 LCD Guidelines (TFT) Type of Imperfection Imperfections Not Allowed NEC 13" TFT, XGA Electrical Imperfections: Bright dots (a) Dark dots (a) • 13 or more single bright dots. • 3 or more double bright dots. • 8 or more single or double dark dots. • 3[...]
-
Page 96
5-4 Reference Information HP OmniBook 2100/3000/3100 Table 5-2. OmniBook 2100 LCD Guidelines (DSTN) Type of Imperfection Imperfections Not Allowed Sanyo 12" DSTN, SVGA Imperfections: Spots (a) Lines (b) Polarizer scratches (c) Polarizer dents, bubbles (d) • 5 or more spots 0.2-0.4 mm avg. dia. • 3 or more lines 0-3 mm long and over 0.03 mm[...]
-
Page 97
[...]
-
Page 98
1. Product Information 2. Removal and Replacement 3. Troubleshooting and Diagnostics 4. Replaceable Parts 5. Reference Information Part Number 5967-4703 Printed in U.S.A. 4/98[...]