Français dropdown-ico

HP (Hewlett-Packard) SL165Z G7 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation HP (Hewlett-Packard) SL165Z G7. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel HP (Hewlett-Packard) SL165Z G7 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation HP (Hewlett-Packard) SL165Z G7 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation HP (Hewlett-Packard) SL165Z G7 devrait contenir:
- informations sur les caractéristiques techniques du dispositif HP (Hewlett-Packard) SL165Z G7
- nom du fabricant et année de fabrication HP (Hewlett-Packard) SL165Z G7
- instructions d'utilisation, de réglage et d’entretien de l'équipement HP (Hewlett-Packard) SL165Z G7
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage HP (Hewlett-Packard) SL165Z G7 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles HP (Hewlett-Packard) SL165Z G7 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service HP (Hewlett-Packard) en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées HP (Hewlett-Packard) SL165Z G7, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif HP (Hewlett-Packard) SL165Z G7, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation HP (Hewlett-Packard) SL165Z G7. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    HP Pr oL iant SL 1 6 5z G7 Serv er Maintenance and S er v ice Gui de Part number 602406-001 First edition March 2010[...]

  • Page 2

    Legal notices © Copyright 2010 Hewlett-Pa ckard Development Company, L.P. The information contained here in is subject to change without notice. The onl y warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothin g herein should be construed as constituting an additiona[...]

  • Page 3

    Contents 3 Contents Customer se lf repair ........................................................................................................... .................... 5 Parts only warr anty service .................................................................................................... .................... 5 Illustrated par ts catal[...]

  • Page 4

    Contents 4 BIOS Setup Utility ............................................................................................................. ..................... 83 Accessing the BIOS Setup Utility ............................................................................................... ............... 83 Navigating through the Setup Utility [...]

  • Page 5

    Customer self repair 5 C u stomer s elf r epair HP products are designed with many Customer Se lf Repair (CSR) parts to minimize repair time and allow for greater flexibility in performing defective parts replacement. If duri ng the diagnosis period HP (or HP service providers or service pa rtners) iden tifies that the repair can be ac complished b[...]

  • Page 6

    Customer self repair 6 Répar ati on par le c lie nt (C SR) Les produits HP comportent de nombreuses pièces CSR (Customer Self Repair = réparation par le client) afin de minimiser les délais de réparation et faciliter le re mplacement des pièces défectueuses. Si pendant la période de diagnost ic, HP (ou ses partenaires ou main teneu rs agré[...]

  • Page 7

    Customer self repair 7 R ipar a z i one da parte del c li ente Per abbreviare i tempi di riparazione e garantire una maggiore flessibilità nella sostituzione di parti difettose, i prodotti HP sono realizzati con nu merosi componenti che possono essere riparati direttamente dal cliente (CSR , Customer Self Repair). Se in fase di diagnostica HP (o u[...]

  • Page 8

    Customer self repair 8 C u stomer s elf r epair HP Produkte enthalten viele CSR-Te ile (Customer Self Repair), um Re paraturzeiten zu minimieren und höhere Flexibilität beim Austausch defekter Ba uteile zu ermöglichen. Wenn HP (oder ein HP Servicepartner) bei der Diagnose fe ststellt, dass das Produkt mith ilfe eines CSR-Teils repariert werden k[...]

  • Page 9

    Customer self repair 9 R epar ac i ones del pr op i o c li ente Los productos de HP incluyen muchos componen tes que el propio usua rio puede reemplazar ( Customer Self Repair , CSR) para minimizar el tiempo de re paración y ofrecer una mayor flexibilidad a la hora de realizar sustituciones de componentes defectuosos. Si, durante la fase de diagn?[...]

  • Page 10

    Customer self repair 10 C u stomer s elf r epair Veel onderdelen in HP producten zijn door de klan t zelf te repareren, waard oor de reparatieduur tot een minimum beperkt kan blijven en de flexibilit eit in het vervangen van defect e o nderdelen groter is. Deze onderdelen worden CSR- onderdelen (Customer Self Repair) genoemd. Al s HP (of een HP Ser[...]

  • Page 11

    Customer self repair 11 R epar o fe ito pelo c lien te Os produtos da HP são projetados com muitas peças para reparo feito pelo cliente (CSR) de modo a minimizar o tempo de reparo e permitir maior flexib ilidade na substituição de peças com defeito. Se, durante o período de diagnóstico, a HP (ou fornec edores/parceiros de serviço da HP) con[...]

  • Page 12

    Customer self repair 12[...]

  • Page 13

    Customer self repair 13[...]

  • Page 14

    Customer self repair 14[...]

  • Page 15

    Customer self repair 15[...]

  • Page 16

    Illustrated parts catalog 16 Illus tr ated parts catalog Mec hani cal com ponents Item Description Spare part number Customer self repair 1 Fan blank 2A Air baffle 1 607824-001 Mandatory 2B Air baffle, DIMM 610857-001 Mandatory 3 1U tray for 165z system 4 PCIe x16 riser card b racket 5 PCIe x4 storage card cage 6 Top cover 1 Mandatory—Parts for w[...]

  • Page 17

    Illustrated parts catalog 17 3 No—Some HP parts are not designed for customer self repair. In order to satisfy the customer warranty, HP requires that an authorized service pr ovider replace the part. These parts are identified as "No" in the Illustrated Parts Catalog. 1 Mandatory: Obligatoire—Pièces pour lesquelles la ré paration p[...]

  • Page 18

    Illustrated parts catalog 18 3 No: No—Algunos componentes no están diseñados para que puedan ser reparados por el usuario. Para que el usuario haga valer su garantía, HP po ne como condición que un proveedor de servicios autorizado realice la sustitución de estos compon entes. Dichos componentes se identifican con la palabra “No” en el c[...]

  • Page 19

    Illustrated parts catalog 19[...]

  • Page 20

    Illustrated parts catalog 20 Sy s t e m c o m p o n e n t s Item Description Spare Part Number Customer Self Repair 1 System fan 576898-001 Manda tory 2 PCIe x4 riser card 3 Processors, OpteronAMD Opteron AMD Opteron 6164HE 12c 1.7 Ghz 598730-001 Optional AMD Opteron 6124HE 8c 1.8Ghz 55W 602104-001 Optional AMD Opteron 6168 12c 1.9 Ghz 75W 602108-0[...]

  • Page 21

    Illustrated parts catalog 21 Item Description Spare Part Number Customer Self Repair DIMM,2GB PC3-10600R,12 8Mx8,RoHS 595094-001 Mandatory DIMM,4GB PC3-10600R,25 6Mx4,RoHS 595095-001 Mandatory DIMM,4GB PC3-10600R,51 2Mx4,RoHS 595096-001 Mandatory DIMM,8GB PC3-10600R,51 2Mx4,RoHS 595097-001 Mandatory DIMM,16GB PC3-8500R, 512Mx4,RoHS 59509 8-001 Mand[...]

  • Page 22

    Illustrated parts catalog 22 2 Optional: Facultatif—Pièces pour lesquelles la réparation par le client est facultative. Ces pièces sont également conçues pour permettre au client d'effect uer lui-même la r éparation. Toutefois, si vous demandez à HP de remplacer ces pièces, l'intervention peut ou non vous être facturée, selon[...]

  • Page 23

    Illustrated parts catalog 23 2 Optional: Optioneel—Onderdelen waarvoor repar atie door de klant optioneel is. Ook deze onderdelen zijn ontworpen voor reparatie door de kla nt. Als u echter HP verzoekt deze onderdelen voor u te vervangen, kunnen daarvoor extra kosten in rekening worden gebr ac ht, afhankelijk van het type garantieservice voor het [...]

  • Page 24

    Illustrated parts catalog 24 HP con tac t inf or mati on For the name of the nearest HP authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. • In other locations, refer to the HP website at http://www.hp.com/ . For HP technical support: • In North America: ○ Call 1-800-HP-INVENT (1-800-474-68[...]

  • Page 25

    Removal and replacement procedures 25 R emo v al and r eplacement pr ocedur es This chapter provides subassembly/module-level removal and replacement procedures for the HP ProLiant SL165z G7 server. Review the specifications of a new component before in stalling it to make sure it is co mpatible with the server. When you integrate new com ponents i[...]

  • Page 26

    Removal and replacement procedures 26 Pr e -installati on pr ocedur e Perform the steps below before yo u open the server or before you remove or repla ce any component. WARNING: Failure to properly turn off the serv er before you open the server or before your start installing/ removing components may caus e serious damage as well as bodily harm. [...]

  • Page 27

    Removal and replacement procedures 27 CAUTION: The following ra ck-mount instruct ions shall be paid attention to. • Elevated Operating Ambient - If installed in a cl osed or multi-unit rack assembly, the operating ambient temperature of the rack environm ent ma y be greater than room ambient. Therefore, consideration should be given to installin[...]

  • Page 28

    Removal and replacement procedures 28 These symbols, on power supplies or sy stems, indicate that the equipment is supplied by multiple sources of power. WARNING: To reduce the risk of injury from el ectric shock, remove all power cords to completely disconnect power from the sy stem. Po w e r i n g d o w n t h e s e r v e r The server does not com[...]

  • Page 29

    Removal and replacement procedures 29 Figure 1 Removing the Top Cover To reinstall the top cover: 1. Align the top cover to the chassis and then slide it towards the front panel to position it into place. 2. Once the top cover is attached to the chassis, ti ghten the two rear screws to secure the top cover to the chassis. Figure 2 Reinstalling the [...]

  • Page 30

    Removal and replacement procedures 30 Ca ble management Always follow good cable management prac tices when working inside the computer. • Keep cables away from major heat sources like the heat sink. • Do not jam cables on top of expansion cards or memory modules. Printed circuit cards are not designed to withstan d excessive pressure. • Keep[...]

  • Page 31

    Removal and replacement procedures 31 Ca ble connecti ons The following table provides information about personality board cable connector labels. Table 1 Cable Connections from the Personality Board Cable To Cable Designator 6-pin system fan connector 1 System fan 1 J6 6-pin system fan connector 2 System fan 2 J8 6-pin system fan connector 3 Syste[...]

  • Page 32

    Removal and replacement procedures 32 Table 3 Cable Connections from the System Board Cable To System board designator 4-pin power connector Power board J54 ODD 1 HDD 1 J23 ODD 2 HDD 2 J20 Har d d r i v es One server tray can accommodate two 3.5 in. or four 2.5 in. hard drives, and the chassis can accommodate two server trays for up to four 3.5 in.[...]

  • Page 33

    Removal and replacement procedures 33 Figure 5 Removing the Hard Drive Assembly WARNING: Ensure that the system is powered off an d all power sources have been disconnected from the server. Voltages are present at various locatio ns within the server whenever an AC power source is connected. This v oltage is present even when the main power switch [...]

  • Page 34

    Removal and replacement procedures 34 Figure 6 Installing the Hard Drive Assembly S y st em boar d conf igur ati on Pr ocess or HP ProLiant SL165z G7 Server supports AMD 8-co re/12-core G34 -Opteron processors. If a single processor is installed, then use socket 1. When two processor s are used, the server supports boot functions through the proce [...]

  • Page 35

    Removal and replacement procedures 35 Figure 7 Processor Locations Item Description 1 Processor 1 2 Processor 2 WARNING: To reduce the risk of personal injury from hot surfaces, allow the heat sink and the processor to cool be fore touching them. NOTE: Before installing the processor, remove the air baffle. To remove the air baffle: 1. Gently rock [...]

  • Page 36

    Removal and replacement procedures 36 To remove the heat sink: 1. Loosen the two spring-load ed screws. 2. Lift the heat sink away from the system board. CAUTION: Place heat sink down in an upright position with the thermal patch facing upward. Do not let the thermal patch touch the work surface. Figure 9 Removing the Heat Sink Assembly IMPORTANT: [...]

  • Page 37

    Removal and replacement procedures 37 Figure 10 Picking up the Processor from the S ocket with the Installation Tool 5. Remove the processor with the installation tool. Figure 11 Removing the Pr ocessor NOTE: If the processor installation tool is not incl ud ed, grasp the processor by its edges and lift it out of the socket. CAUTION: The pins of th[...]

  • Page 38

    Removal and replacement procedures 38 To apply the thermal grease compound: 1. Use the alcohol pads provided in spare part kit or a clean cloth dipped in rubbing alcohol to clean the contact surface on the heat sink and on the new processor. Wipe the contact surfaces several times to make sure that no parti c les or dust contaminants are evident. 2[...]

  • Page 39

    Removal and replacement procedures 39 To install the new processor: 1. Squeeze the push finger s of the processor installation tool. 2. Align the tool on the processor; release th e push fingers and hold the processor. Figure 13 Picking up the Processor with the Installation Tool 3. Insert the processor into the so cket. Figure 14 Aligning and Inse[...]

  • Page 40

    Removal and replacement procedures 40 Figure 15 Installing the Processor NOTE: If the processor installation tool is not incl ud ed, grasp the processor by its edges and install it into the socket. CAUTION: With the load lever and the retention plate disengaged, hold the processor by its edg es and align it over the empty processor socket. Make sur[...]

  • Page 41

    Removal and replacement procedures 41 To install the heat sink: 1. Properly align the heat sink spring-loaded sc rews to the system board mounting holes. 2. Tighten the spring-loaded screws clockwise to se cure the heat sink connection to the system board. Figure 16 Installing the Heat Sink Assembly CAUTION: When installing two heat sin ks, please [...]

  • Page 42

    Removal and replacement procedures 42 To install the air baffle: 1. Connect all necessary cables. 2. Gently place the air baffle 1 on the system board. 3. Align the screw on the air baffle 2 to the hole on the side of chassis, tighten the screw, and then rotate the other side of the air baffle 2 d own. Figure 17 Installing the Air Baffle[...]

  • Page 43

    Removal and replacement procedures 43 Memory Each system board has twenty-four DIMM slots th at support up to 192 GB maximum syst em memory (8 GB in each of the twenty-four DIMM slots). You must adhere to the following guidelines when adding or replacing memory modules: • For 2P system, both physical processors must be of the same type and speed.[...]

  • Page 44

    Removal and replacement procedures 44 Figure 19 DIMM Slots To remove memory module: 1. Completely open the holding clip s securing the memory module. 2. Gently pull the memory module upwa rd to remove it from the slot. Figure 20 Removing a Memory Module CAUTION: Place the memory module on a static-dissipati ng work surface or inside of an anti-stat[...]

  • Page 45

    Removal and replacement procedures 45 To install a memory module: 1. Align the notch on the bottom edge of the memory module with the keye d surface of the DIMM slot and then fully press the memory module into the sl ot until the holding clips snap back in place. Figure 21 Installing a Memory Module CAUTION: The DIMM slots are struct ured to ensure[...]

  • Page 46

    Removal and replacement procedures 46 P CIe e xpansion car d System board PCIe expansion slot There is one PCIe expansio n slot on each system board. Figure 22 System Board PCIe Expansion Slot Component Designator Component Function J301 PCIe x16 (FH/FL) slot Support a PCIe riser card[...]

  • Page 47

    Removal and replacement procedures 47 PCIe riser card expansion slot The one PCIe riser card attached to the PCIe cage converts the functionality of the system board expansion slot to the slot positioned at a 90° angle from the system board. Figure 23 PCIe x16 Riser Card Connector Loc ation • One slot PCIe riser card (x1 6 link with x16 slot) To[...]

  • Page 48

    Removal and replacement procedures 48 To remove the PCIe x16 riser card from the bracket: 1. Remove the two screws sec uring the riser card to the bracket. 2. Remove the riser card from the bracket. Figure 25 Removing the PCIe Riser Card from Bracket To install the PCIe x16 rise r card to the bracket: 1. Align the screw holes on the riser card to t[...]

  • Page 49

    Removal and replacement procedures 49 To install the riser card with the bracket into the system board: 1. Align the riser card connector to the system boar d expansion slot and then press the riser card assembly down to ensure full connection to the system board. 2. Fasten the screw to secure the br acket to the side of the chassis. Figure 27 Inst[...]

  • Page 50

    Removal and replacement procedures 50 To install the PCIe expansion board: 1. Press the PCIe expansion board latch spring. 2. Slide the PCIe expansion board bracket across the chassis. 3. Insert the PCIe expansion board into the slot on the PCIe riser card. 4. Install and fasten the screw. 5. Close the PCIe expansion board latch. Figure 29 Reinstal[...]

  • Page 51

    Removal and replacement procedures 51 Sto rag e ca rd System board storage card slot There is one storage card sl ot on each system board. Figure 30 System Board Storage Card Slot Component Designator Component Function J78 PCIe x4 (LP) slot (storage card slot) Supports a PCIe riser card[...]

  • Page 52

    Removal and replacement procedures 52 PCIe riser card expansion slot The PCIe riser card attached to th e storage card cage converts the functionality of the system b oard expansion slot to the slot positioned at a 90° angle from the system board. Figure 31 PCIe x4 Riser Card Connector Loca tion • One slot PCIe riser card (x4 link with x8 slot) [...]

  • Page 53

    Removal and replacement procedures 53 Installing PCIe riser card To remove the PCIe riser card: 1. Loosen the two screws securing the ri ser card to the storage card cage. 2. Remove the riser card from the storage card cage. Figure 33 Removing the PCIe x4 Riser C ard To install the PCIe riser card: 1. Align the screw holes on the riser card to the [...]

  • Page 54

    Removal and replacement procedures 54 To reinstall the storage card cage: 1. Align the storage card cage to the system board storage card slot, and then press it down to ensure full connection to the syst em board. 2. Tighten the two screws to secure the storage card cage to the server. Figure 35 Reinstalling the Storage Card Cage 3. Connect the ne[...]

  • Page 55

    Removal and replacement procedures 55 To remove the mgmt card: 1. Loosen the screw on the mgmt card. 2. Remove the mgmt card from the mgmt card connector. Figure 37 Removing the Mgmt Card To reinstall the mgmt card: 1. Remove the mgmt p ort knock -out. Figure 38 Removing the Mgmt Port Knock-out NOTE: You must use the slotted driver to remove the kn[...]

  • Page 56

    Removal and replacement procedures 56 Figure 39 Reinstalling the Mgmt Card SD r eader module (Optional) Each system board can support one SD reader module. The SD reader module is optional for the shipment. The following figure sh ows the SD reader module location. Figure 40 SD Reader Module Location[...]

  • Page 57

    Removal and replacement procedures 57 To remove the SD reader module: 1. Disconnect the SD reader module USB cable from USB connectors on the SD reader module and the system board. Figure 41 Disconnecting the SD Reader Module USB Cable 2. Loosen the screw that secu res the SD reader modu le to the server and then remove the SD reader module. Figure[...]

  • Page 58

    Removal and replacement procedures 58 To reinstall the SD reader module: 1. Remove the SD reader mod ule knock-out from the front panel of the server. Figure 43 Removing the SD Reader Module Knock-out NOTE: You must use the slotted driver to remove the kn ock-out. 2. Align the SD reader module to the front panel, an d tighten the screw that secures[...]

  • Page 59

    Removal and replacement procedures 59 3. Connect the SD reader module USB cable from USB connectors on the SD reader module and the system board. Figure 45 Connecting the SD Reader Module USB Cable S y stem battery The server uses nonvolatile memory that requires two batteries to retain system information wh en power is removed. This 3 V lithium co[...]

  • Page 60

    Removal and replacement procedures 60 instructions. n the battery is removed. You must reco nfigure BIOS ettings whenever yo u replace the battery. CAUTION: Loss of BIOS settings occurs whe s u may need to sag e, battery life is five to ten years. NOTE: If the server no longer automatica lly displa ys the correct date and time, yo replace the syste[...]

  • Page 61

    Removal and replacement procedures 61 BB W C (Optional) Each system board can support one BBWC. The B BWC is optional for the shipment. The following figure sh ows the BBWC location. Figure 48 BBWC Location To remove the BBWC: 1. Loosen the screw that secu res the BBWC assemb ly to the server tray , and then remove the BBWC assembly away from the s[...]

  • Page 62

    Removal and replacement procedures 62 2. Pull the BBWC retaining latch. 3. Slide the BBWC back, up and out of the tray. Figure 50 Removing the BBWC To reinstall the BBWC: 1. Pull the BBWC retaining latch. 2. At the same time, align the locking tabs on the BBWC to their holes on the tray. Press the BBW C into the tray, and then push it along the dir[...]

  • Page 63

    Removal and replacement procedures 63 3. Align the hole on the BBWC assembly to its corresponding hole on the server tray. 4. Meanwhile, fasten the scre w that secures the BBWC assembly to the server tray. Figure 52 Reinstalling the BBWC Assembly S y stem boar d r emo val and r eplacement pr ocedur e To remove the system board: Remove the tray with[...]

  • Page 64

    Removal and replacement procedures 64 Remove the system board from the tray: 1. Loosen the nine screws that secu re the system board to the tray. 2. Slide the system board back, up and out of the tray. Remove the system board from the tray. Figure 54 Removing the System Board from the Tray To reinstall the system board: 1. Align the system board I/[...]

  • Page 65

    Removal and replacement procedures 65 To reinstall the tray with system board: 1. Slide the tray assembly into the tray bay until it stops. 2. Rotate the tray handle until the tray latch catches. Figure 56 Reinstalling the Tray with System Board P o w er boar d The following figure sh ows the top side of the power board. Figure 57 Power Board Conne[...]

  • Page 66

    Removal and replacement procedures 66 Item Description 5 16-pin power connector 6 SATA power connector 7 SATA power connector 8 4-pin power connector 9 24-pin power connector The following figure sh ows the power board location. Figure 58 Power Board Location[...]

  • Page 67

    Removal and replacement procedures 67 To remove the power board: 1. Loosen the four screws that secure the power board to the server tray. 2. Push the power board forward, up and out of the server tray. Figure 59 Removing the Power Board To reinstall the power board: 1. Align the four holes on the power board to thei r corresponding holes on the se[...]

  • Page 68

    Removal and replacement procedures 68 P o w er suppl y unit (P S U) Located on the rear panel of the server power supply is a standard auto ranging 750 W or 1200 W PSU with PFC (power factor correction) function. Figure 61 Power Supply Unit WARNING: Take note of the following reminders to reduce the risk of personal injury from electric shock hazar[...]

  • Page 69

    Removal and replacement procedures 69 To remove the power supply: 1. Press the red colored handle. 2. Slide the power supply out of the power supply cage. Figure 62 Removing the Power Supply To reinstall the power supply: 1. Remove the power supply blank from the power supply cage. Figure 63 Removing the Power Supply Blan k[...]

  • Page 70

    Removal and replacement procedures 70 2. Slide the power supply into the power supply bay until it snaps into place. Figure 64 Reinstalling the Power Supply Sys t e m f a n The server can support either three o r four system fans located at the system fan cage of the chassis rear. System fan 1 is optional. The figure below identifies t he system fa[...]

  • Page 71

    Removal and replacement procedures 71 Device number Connector System fan 4 J11 on the personality board A new system fan can be installed to allow the serv er to operate properly in case a defaul t system fan becomes defective. To remove the system fan: 1. Power down the server. 2. Disconnect the power cord(s). 3. Unlock the server if necessa ry an[...]

  • Page 72

    Removal and replacement procedures 72 To reinstall the system fan: 1. Hold the system fan and press it into the system fan bracket. 2. Connect the system fan cable to its corresponding board connector. Figure 67 Reinstalling the System Fan[...]

  • Page 73

    Connectors, switches, and LEDs 73 C onnec tors , s w itc hes , and LEDs This chapter contains illustrations and tables id entifying and describing the connectors, switches, jumpers, buttons, and LED indicators located on th e front panel, rear panel, and s ystem board of the HP ProLiant SL165z G7 server. C onnec tor s and compo nents F r ont panel [...]

  • Page 74

    Connectors, switches, and LEDs 74 Item Description 12 Low-profile PCIe expansion card slot cover 13 GbE LAN port for NIC 3 14 Mgmt port (optional) 15 Front UID switch/LED Re a r p a n e l c o m p o n e n t s Figure 69 Rear Panel Components Item Description 1 Power supply 2 cable socket 2 Power supply 1 cable socket 3 Rear UID LED[...]

  • Page 75

    Connectors, switches, and LEDs 75 S y stem boar d components Figure 70 System Board Components Item Designator Description 1 J1 System maintenance jumper 2 J301 PCIe x16 slot 3 CPU1 Processor 1 4 J11 Mgmt card connector 5 J110 DIMM slot 12 for processor 1 6 J103 DIMM slot 1 for processor 1 7 J210 DIMM slot 12 for processor 2 8 J54 4-pin power conne[...]

  • Page 76

    Connectors, switches, and LEDs 76 Item Designator Description 21 J100 SAS LED connector 22 J36, J69 Fan connectors 6/7 23 J13 Mini-SAS connector for SATA 24 J55 Power backplane control connector 25 J98 Front panel header 26 J56 TPM connector 27 J78 PCIe x4 slot 28 J23 ODD 1 29 J20 ODD 2 30 BH1 3 V CMOS battery (CR2032) 31 J6 NMI jumper CAUTION: The[...]

  • Page 77

    Connectors, switches, and LEDs 77 LED indi cato rs This section contains illustration an d descriptions of internal and exte rnal status LED indicators located on the: • Front panel • Rear panel • System board These LED indicators aid in problem diagnosis by indicating the status of system components and operations of the server. Fro n t p a [...]

  • Page 78

    Connectors, switches, and LEDs 78 Figure 72 Front UID LED Indicator Location Table 6 Front UID LED Indicator Status Components Status Descriptions Front UID LED indicator Ste ady blue Identification Flashing blue System is being remotely managed Off Off[...]

  • Page 79

    Connectors, switches, and LEDs 79 Figure 73 Power LED Indicator Location Table 7 Power LED Indicator Status Component Status Description Power LED indicator Steady green The server is operating normally Steady amber The server is system off or in hibernation with A/C power Steady red Critical event happens to the server. Please refer to SEL for det[...]

  • Page 80

    Connectors, switches, and LEDs 80 The LAN port on the front panel has two LED indica tors that allow monitoring of network activity. Figure 74 LAN LED Indicator Location Table 8 LAN LED Indicator Status Item Component Status Description 1 Mgmt port activity LED indicator (optional) Flashing amber LAN is active 2 Mgmt port li nk LED indicator (optio[...]

  • Page 81

    Connectors, switches, and LEDs 81 R ear panel LED indicat or Figure 75 Rear UID LED Indicator Location Table 9 Rear UID LED Indicator Status Components Status Descriptions Rear UID LED indicator Blue Identification Flashing blue System is being remotely managed Off Off[...]

  • Page 82

    Connectors, switches, and LEDs 82 S y stem boar d LED indicator Each system board contains one LED indicato r for use during troubleshooting operations. Figure 76 System Board LED Indicator Table 10 System Board LED Indicator Status Components Status Descriptions BMC activity LED indicator Steady green BMC is power on and in initialization process [...]

  • Page 83

    Diagnostic tools and setup utilities 83 Di agnos ti c tools and s etup u tilitie s This chapter provides an overvie w of the Power- on Self-Test (POST), the POST error messages, and BIOS, SAS and SATA setup utilities. BIO S softwar e The server uses BIOS to boot up the system. BIOS software is a ROM-based firmware that allows reliability, manageabi[...]

  • Page 84

    Diagnostic tools and setup utilities 84 Na v igating thr ough the Setup Utility Use the keys listed in the legend bar on the right of the Setup screen to na vigate through the various menu and submenu screen s of the Setup Utility. Table 11 lists these legend keys and their respective functions. Table 11 Setup Utility Navigation Keys Key Function ?[...]

  • Page 85

    Diagnostic tools and setup utilities 85 Setup Utilit y men u bar The BIOS Setup Utility provides a menu bar with the menu selec tions. The menu bar choices are described in the topics below. Main menu Figure 77 Main Menu of BIOS Setup Utility Use this menu to configure t he following items: • View product name. • View processor information and [...]

  • Page 86

    Diagnostic tools and setup utilities 86 Advanced menu Figure 78 Advanced Menu of the BIOS Setup Utility WARNING: Incorrect settings may cause the serv er to ma lfunction. To correct the se ttings, press the F9 key to restore the default settings. • CPU Configuration —Configure CPU settings . • SATA Configuration —Configure IDE settings . ?[...]

  • Page 87

    Diagnostic tools and setup utilities 87 Figure 79 IPMI Submenu of the BIOS Setup Utility • BMC Firmware Revision —Display the version of the BMC hardware and firmware. • BMC/IPMI FW Date —View BMC/IPMI FW date. • BMC SDR Version —View BMC SDR version. • Set LAN Configuration —Set LAN settings. • SEL Configuration —Display BMC ev[...]

  • Page 88

    Diagnostic tools and setup utilities 88 Boot menu Figure 80 Boot Menu of the BIOS Setup Utility • Boot Settings Configuration — Configure s ettings during system boot. • Boot Device Priority —Use this screen to specify the order in whi ch the system checks for a boot device . • USB Drive Boot Priority —Configure priority settings for US[...]

  • Page 89

    Diagnostic tools and setup utilities 89 Security menu Figure 81 Security Menu of the BIOS Setup Utility Use this menu to configure t he following items: • Supervisor Password —Indicate if a supervisor password has been installed to the system. • User Password —Indicate if a user password has been installed to the system. • Change Supervis[...]

  • Page 90

    Diagnostic tools and setup utilities 90 Exit menu Figure 82 Exit Menu of the BIOS Setup Utility Use this menu to save changes or discard change s. When you save and exit, the server reboots. • Save Changes and Exit —Save the changes you have made and exit the BIOS Setup Utility. • Discard Changes and Exit —Exit the BIOS Setup Utility withou[...]

  • Page 91

    Diagnostic tools and setup utilities 91 These diagnostics, which reside in the BIOS RO M, is olate server-related logic failures and indicate the board or component that needs to be replaced, as indicated by the error me ssages. Most server hardware failures are accurately isolated during POST. The number of tests displayed depends on the configura[...]

  • Page 92

    Physical and operating specifications 92 Ph y sical and oper ating s pec if icati ons This chapter provides physical and operating spec ifications for the HP ProLiant SL165z G7 server. Specifications include: Sy s t e m u n i t Table 12 Hardware Specifications Item Components Processor socket AMD G34 1944-pin socket Processor 2P AMD G34-Opteron Chi[...]

  • Page 93

    Physical and operating specifications 93 Table 12 Hardware Specifications Item Components Power Supply unit (PSU) 750 W or 1200 W redundant, power supply Thermal solution Four system fans Table 13 Physical Dimensions Item Description System board platform EATX (Exten ded Advanced Tec hnology Extended) System board dimension 12” x 13” (304.8 mm [...]

  • Page 94

    Physical and operating specifications 94 Table 15 Power Supply Specifications Item Description Input requirements: Rated input voltage Normal line voltage 90 VAC to 264 VAC 100 VAC to 120 V AC / 200 VAC to 240 VAC Line frequency 50Hz – 60Hz Rated input current Max: 10A BTU rating N/A Power supply output power: Rated steady state power Maximum pea[...]

  • Page 95

    Index 95 Inde x A AC power power-down procedures, 28 air baffle installing, 42 removing, 35 B battery replacement warnings, 59 BBWC reinstalling, 62 removing, 61 BIOS Setup Utility accessing, 83 additional navigation keys, 84 menu bar, 83 BIOS software Overview, 83 C cable management, 30 CSR (customer self repair), 5 customer self repair (CSR), 5 D[...]

  • Page 96

    Index 96 hot surface symbol, 27 warning, 26 HP authorized reseller, 24 contact information, 24 technical support, 24 technical support requirements, 24 I improper airflow caution, 26 L LAN controller, 92 LED indicator system board LED, 82 M memory modules installing, 45 removing, 44 spare part number, 20 mgmt card reinstalling, 55 removing, 55 O on[...]

  • Page 97

    Index 97 reinstalling, 64 removing, 63 system cover top cover, 28 system fan reinstalling, 72 removing, 71 System fan spare part number, 20 system LEDs. See status LEDs system structure front panel, 73 rear panel, 74 System Unit specifications, 92 T thermal solution, 93 top cover reinstalling, 29 removing, 28 Top cover spare part number, 16 Tray wi[...]