HP CQ56-108SL manuel d'utilisation

Aller à la page of 110

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation HP CQ56-108SL. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel HP CQ56-108SL ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation HP CQ56-108SL décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation HP CQ56-108SL devrait contenir:
- informations sur les caractéristiques techniques du dispositif HP CQ56-108SL
- nom du fabricant et année de fabrication HP CQ56-108SL
- instructions d'utilisation, de réglage et d’entretien de l'équipement HP CQ56-108SL
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage HP CQ56-108SL ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles HP CQ56-108SL et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service HP en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées HP CQ56-108SL, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif HP CQ56-108SL, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation HP CQ56-108SL. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Compaq Presario CQ56 Notebook PC and HP G56 Notebook PC Maintenance and Service Guide SUMMARY This guide is a troublesh ooting reference us ed for maintaining an d servicing the comput er. It provide s comprehensive information o n identifying co m puter features, components, an d spare parts; troubleshootin g computer prob lems; and performing com[...]

  • Page 2

    © Copyright 2010 Hew lett-Packard Development Company, L.P. AMD, ATI, and Athlon are trademar ks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Celeron, and Pentium are trademarks of Intel corporation in the U.S. and other countries. Microsoft and Windows a[...]

  • Page 3

    Safety warning notice WARNING! To reduce the p ossibility of heat-related inju ries or of overheati ng the compute r, do not place the compu ter directly on your lap or o bstruct the computer ai r vents. Use the computer only on a hard, flat surface. Do n ot allow another hard surface, such as an adjoinin g optional printer, or a soft surface, such[...]

  • Page 4

    iv Safety warning no tice[...]

  • Page 5

    Table of contents 1 Product description ............ ......... ........... ........... ........ ............ ........... ........ ............ ......... . ................ ......... ....... 1 2 External component id enti fication ...... ........... ........ ........... ........ ........... ....... ........... .......... ....... ........ ........ ..[...]

  • Page 6

    Packaging and transporting guidelines ........ ........... .......... ........ ........ 32 Works tation guideline s ..................................................................... 32 Equipmen t guidelines .................... ............................. ...................... 33 Component replac ement procedur es .. .......... ......... ...[...]

  • Page 7

    DVD±RW SuperMulti Double-Layer Driv e with LightScribe specifications ......... ............. ............. ...... 85 7 Backup and recovery .................... ................. ............... ............. ................. ............... ....................... ............ 86 Window s 7 back up and r ecov ery ...... ................. .......[...]

  • Page 8

    viii[...]

  • Page 9

    1 Product description Category Description HP G56 Compaq Presario CQ56 HP G56 Compaq Presario CQ56 AMD AMD Intel Intel Product name Compaq Presario CQ56 N otebook PC √ √ HP G56 Notebook PC √ √ Processors Intel Mobile Celeron 925 processor (2.3 GHz, 1-MB L3 cache, 800 MHz) √√ Intel® Celeron® 900 processor (2.2 GHz) √√ Intel® Penti[...]

  • Page 10

    Category Description HP G56 Compaq Presario CQ56 HP G56 Compaq Presario CQ56 AMD AMD Intel Intel Chipset ATI™ RS880M √√ Southbridge - SB820 √√ Intel® GL40 √√ Southbridge - ICH9m √√ Graphics UMA (integrated) with shared video memory √√ √ √ Support for BD or HD-DVD playback with HD decoder an d DX10 (U MA) √√ √ √ Pa[...]

  • Page 11

    Category Description HP G56 Compaq Presario CQ56 HP G56 Compaq Presario CQ56 AMD AMD Intel Intel Optical drives 12.7-mm (0.5-in) fixed SATA tray load √√ √ √ DVD±RW SuperMulti Double-Laye r Drive with Li ghtScr ibe (select models only) √√ √ √ Webcam Select models only. VGA camera, fixed angle with ac tivity light and single analog m[...]

  • Page 12

    Category Description HP G56 Compaq Presario CQ56 HP G56 Compaq Presario CQ56 AMD AMD Intel Intel USB (3) √√ √ √ VGA (Dsub 15-pin) supporting 1600×1200 external resolution at 75 Hz √√ √ √ Smart-pin AC power √√ √ √ Keyboard/ pointing devices Pocket keyboa rd, 39.62 -cm (15.6- in) with numeric keypad √√ √ √ TouchPad wi[...]

  • Page 13

    2 External component identification Top TouchPad Component Description (1) TouchPad light To turn the TouchPad on and off, q uickly double-tap the TouchPad light. ● Off: TouchPad is on. ● Amber: TouchPad is off. (2) TouchPad zone Moves the pointer and selects or activates items on the screen. (3) Left TouchPad button* Press the left side of the[...]

  • Page 14

    Lights NOTE: Your computer may loo k slightly different from the illustrati on in this section. Component Description (1) TouchPad light ● Off: TouchPad is on. ● Amber: TouchPad is off. (2) Caps lock light On: Caps lock is on. (3) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state (Window s) or Suspend stat[...]

  • Page 15

    Button and speakers NOTE: Your computer may loo k slightly different from the illustrati on in this section. Component Description (1) Speaker grill Two integrated speakers produce sound. (2) Power button* ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep.[...]

  • Page 16

    Keys NOTE: Your computer may loo k slightly different from the illustrati on in this section. Component Description (1) esc key* Displays system information when pressed in combina tion with the fn key. (2) Send e-mail key Opens a new e-mail in your default e-mail client. (3) Media application key Launches CyberLink Po werDVD (Windows) or the defau[...]

  • Page 17

    Right side NOTE: Your computer may loo k slightly different from the illustrati on in this section. Component Description (1) Optical drive (select models only) Reads and writes to an optical disc. (2) Optical drive light (select models only) Blin king: The optical drive is being accessed. (3) USB port Connects an optional USB device. (4) AC adapte[...]

  • Page 18

    Left side NOTE: Your computer may loo k slightly different from the illustrati on in this section. Component Description (1) External monitor port Connects an ex ternal VGA monitor or p rojector. (2) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to coo l internal components and prevent overheating.[...]

  • Page 19

    Display Component Description (1) Internal microphone (selec t models only) Records sound. (2) Webcam (select models only) Records video and ca ptures still photographs. (3) Webcam light (select models on ly) On: The webcam is in use. Display 11[...]

  • Page 20

    Wireless antennas Your computer model ha s two anten nas that send and re ceive signals from one o r more wireless devices. These antenna s are not visibl e from the outside of the computer. NOTE: For optimal tran smission, keep the a reas imme diately a round the antenn as (shown in the previous illustr ation) free from o bstructions. To see wirel[...]

  • Page 21

    Bottom Component Description (1) Battery bay Holds the battery. (2) Vents (4) Enable airflow to coo l internal components. NOTE: The computer fan starts up automatically to coo l internal components and prevent overheating. It is no rmal for the internal fan to cycle on and off during routine operation. (3) Battery release latch Releases t he batte[...]

  • Page 22

    Additional hardware Component Description (1) Power cord* Connects an AC adapter to an AC o utlet. (2) AC adapter Converts AC power to DC pow er. (3) Battery* Powers the computer when the computer is not plugged into external power. *Batteries and power cords vary in appearance by region or country. 14 Chapter 2 External component identification[...]

  • Page 23

    3 Illustrated parts catalog Service tag When ordering pa rts or requestin g information, pr ovide the comput er serial number an d model description provided on the servi ce tag. Component Description (1) Product name The product name affixed to the front of your computer. (2) Serial number (s/n) An alphanume ric number that is unique to each produ[...]

  • Page 24

    Computer major components 16 Chapter 3 Illustrated parts catalo g[...]

  • Page 25

    Item Description Spare part number (1) Display assembly NOTE: For more display assembly interna l component spare part information. See Display assembly components on p age 20 . ● 39.6- cm (15.6-in) HD LED BrightView with webcam and microphone display assembly for HP G56 computer 620589-001 ● 39.6- cm (15.6-in) HD LED BrightView with microphone[...]

  • Page 26

    Item Description Spare part number ● For use in Spain 595199-071 ● For use in Switzerland 595199-BG1 ● For use in Turkey 595199-141 ● For use in United Kingdom 595199-031 (3) Speaker assembly (includes cable) 620607-001 (4) Power button board 595204-001 (5) Top cover (includes T ouchPad board) 620605-001 (6) Fan/heat sink assemb ly (include[...]

  • Page 27

    Item Description Spare part number ● AMD Athlon II P340 processor (2.2 GHz, 1-MB L2 cache, 106 6 MHz, 3.2 GT/s)— dual-core 25 W 616343-001 ● AMD Athlon II P320 processor (2.1 GHz, 1-MB L2 cache, 106 6 MHz, 3.2 GT/s)— dual-core 25 W 594165-001 (13) Hard driv e (includes bracket, connector, and screws) ● 500-GB, 5400-rpm 9.5-mm, 6.35-cm (2.[...]

  • Page 28

    Display assembly components Item Description Spare part number (1) Display bezel ● Presario CQ56 with webcam and micro phone modules 620593-001 ● Presario CQ56 with microphone module only 620592-001 ● HP G56 with webcam and microphone modu les 620595-001 ● HP G56 with microphone module only 620594-001 (2) Display inverter 616467-001 (3) Dis[...]

  • Page 29

    Item Description Spare part number 39.6-cm (15.6-in) HD, BrightView, CCFL display panel (includes backli ght cables) 616450-001 (4) Hinge/Bracket Kit (includes left and righ t brackets) For use with LED display panels 595195-001 For use w ith CCFL display pan els 616465-001 (5) Display hinge covers 600650-001 (6) Microphone and cable NOTE: The micr[...]

  • Page 30

    Plastics Kit Item Description Spare part number Plastics Kit 595200-001 (1) Hard drive cove r (inc ludes captive screws) (2) Memory mod ule compartment cover (include s captive screw) 22 Chapter 3 Illustrated parts catalo g[...]

  • Page 31

    Mass storage devices Item Description Spare part number (1) Optical drive (12.7 mm, SATA, fixed, includes bezel and bracket) DVD±RW SuperMu lti Double-Layer Drive with LightScribe 620604-001 (2) Hard drive ● 500-GB, 5400-rpm 9.5-mm, 6 .35-cm (2.5-in) 634932-001 ● 320-GB, 7200-rpm 9.5-mm, 6 .35-cm (2.5-in) 627731-001 ● 250-GB, 7200-rpm 9.5-mm[...]

  • Page 32

    Miscellaneous parts Description Spare part number AC adapt ers ● 65-W, 3-pin Smart AC adapter for use in all coun tries and regions e xcept India 609939-001 ● 65-W, 3-pin Smart AC adapter for use only in India 609948-001 Power cord, AC, 3 wire, black, 1.83-m ● For use in Argentina 490371-D01 ● For use in Australia 490371-011 ● For use in [...]

  • Page 33

    Sequential part number listing Spare part number Description 490371-001 Power cord for use in North America 490371-001 Power cord for use in Australia 490371-021 Power cord for use in Europe 490371-031 Power cord for use in the United Kingdom and Singapo re 490371-061 Power cord for use in Italy 490371-081 Power cord for use in Denmark 490371-111 P[...]

  • Page 34

    Spare part number Description 595199-161 Keyboard for use in Latin America (includes keyboa rd cable) 595199-171 Keyboard for use in Saudi Ara bia (includes keybo ard cable) 595199-211 Keyboard for use in Hungary (in cludes keyboard cable) 595199-221 Keyboard for use in the Czec h Re public (includes keyboard cable) 595199-251 Keyboard for use in R[...]

  • Page 35

    Spare part number Description 616334-001 AMD Athlon II N350 processor (2.4 GHz, 1-MB L2 cache, 106 6 MHz, 3.2 GT/s)—dual-co re 35 W 616343-001 AMD Athlon II P340 processor (2.2 GHz, 1-MB L2 cache, 106 6 MHz, 3.2 GT/s)—dual-co re 25 W 616450-001 39.6-cm (15.6-in) HD CCFL BrightView disp lay panel (includes display panel cable) 616465-001 Hinge/B[...]

  • Page 36

    Spare part number Description 621559-001 1-GB memory module (1333-MHz, DDR3 , AMD) 621566-001 2-GB memory module (1333-MHz, DDR3 , AMD) 623909-001 PCA UMA system board (Intel) 623915-001 PCA UMA system board (AMD) 625830-001 Intel Celeron T3500 processor (2.1 GHz) 626656-001 Webcam module (select models only) 627731-001 320-GB, 7200-rpm 9.5-mm, 6.3[...]

  • Page 37

    4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and re placement procedures: ● Flat-bla ded screw driver ● Magnetic screwdriver ● Phillips P0 screwdriver Service considerations Before disa ssembly or assembly proc edures, review and a dhere to [...]

  • Page 38

    Cables and connectors CAUTION: When servicing the computer, be sure that c ables are placed in their proper locations during the reassembly p rocess. Improp er cable placem ent can damage the co mputer. Cables must be handle d with extreme care to avo id damage. Apply only th e tension require d to unseat or seat the cables during removal an d inse[...]

  • Page 39

    Grounding guidelines Electrostatic discharge damage Electronic componen ts are sensit ive to electrostatic d ischarge (ESD). Circu itry design and struc ture determine the deg ree of sensitiv ity. Networks bu ilt into many integrated circuits provide some protection, bu t in many cases, ESD conta ins enough power to alter device parameters or melt [...]

  • Page 40

    Packaging and transporting guidelines Follow these groun ding guidelines whe n packaging and transp orting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts an d assemblies wi th conductive or approv ed containe rs or packaging. ● Keep ESD-sensitive parts in their conta [...]

  • Page 41

    Equipment guidelines Grounding equi pment must include eith er a wrist stra p or a foot strap at a grou nded workstation. ● When seated, wear a wrist strap connected to a grounded syste m. Wrist straps are flexibl e straps with a minimu m of one megohm ±1 0% resi stance in the ground co rds. To provid e proper ground, wear a strap snugl y agains[...]

  • Page 42

    Component replacement procedures This chapter provides removal an d replacement proced ures. There are as many as 6 7 screws, in 10 different sizes, that mu st be removed, replaced, or lo osened when servicing the computer. Make specia l note of each screw size an d location during remova l and replacement. Service tag When you order parts or reque[...]

  • Page 43

    Computer feet Description Spare part number Rubber Kit (includes computer feet) 600849-001 The computer feet a re adhesive -backed rubber pads . The feet attach to the base enclosur e in the locations illustrated below. Component replacement procedures 35[...]

  • Page 44

    Battery Description Spare part number 6 cell, 2.20-Ah, 47-Wh 593553-001 6 cell, 2.55-Ah, 55-Wh 593554-001 Before r emoving th e batter y, follow these st eps: 1. Shut down the computer. If you are unsure whether the compu ter is off or in Hibernation , turn the computer on, and th en shut it down thr ough the operating system. 2. Disconn ect all ex[...]

  • Page 45

    Hard dr ive NOTE: The hard drive sp are part kit includes a br a cket, connector, and screws. The bracket, connector, an d screws are al so available in the Ha rd Drive Hardwa re Kit. Description Spare part number 500-GB, 5400-rpm 9.5-mm, 6.35-cm (2 .5-in) 634932-001 320-GB, 7200-rpm 9.5-mm, 6.35-cm (2 .5-in) 627731-001 250-GB, 7200-rpm 9.5-mm, 6.3[...]

  • Page 46

    5. Use the Mylar tab (2) to lift the hard drive out of the hard drive co mpartment. 6. Disconnec t the hard drive ca ble from the system board (3) and remove the hard drive from th e computer (4 ) . 7. To replace the hard drive bracket, re move the four Phillip s 3.0×3.5 screws (1) that secure the hard drive bracket to the hard d rive. 8. Grasp th[...]

  • Page 47

    Optical drive NOTE: The optical drive spare part ki t includes a bezel and bracket. Description Spare part number DVD±RW SuperMulti Double-Laye r Drive with LightScribe 620604-001 Before removing the optical drive: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it [...]

  • Page 48

    2. Remove the optical drive screw. 3. Insert a thin tool, such as a screwdriver (1) , into the release acce ss slot in the hard drive bay, and press against the ba ck of the optical drive. 40 Chapter 4 Remova l and replacement procedures[...]

  • Page 49

    4. Grasp the drive (2) and remove it from the opt ical drive bay. Reverse this procedure to rea ssemble an d install the o ptical drive. Component replacement procedures 41[...]

  • Page 50

    WLAN module Description Spare part number Atheros AR9285 802.11b/g/n 1x1 WiFi adapter 605560-005 Realtek RTL8191SE 802.11b/g/n 1x1 WiFi ada pter 593533-001 Broadcom 4313 802.11b/g/n 1x1 WiFi adapter 593836-0 01 Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter ( BT3.0+HS ready) 600370-001 Ralink RT3090BC4 802.11b/g/n 1x1 W[...]

  • Page 51

    4. Disco nnect the main ante nna cable (1) and the auxiliary antenna cabl e (2) from the wirele ss module. 5. Remove the Phillip s 2.0×3.0 screw (3) that secures the WLAN module to the compute r. (The edge of the m odule opposite the slo t rises away from the comp uter.) 6. Remove the WLAN module (4) by pulling it away from the slot at an angle. C[...]

  • Page 52

    Memory module Description Spare pa rt number 1 GB, 1066 MHz DDR2 (Intel) 619545-001 2 GB, 1066 MHz DDR2 (Intel) 619546-001 1 GB, 1333 MHz, DDR3 (AMD) 621559-001 2 GB, 1333 MHz, DDR3, (AMD) 621566-001 Before removing a memory module: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, a[...]

  • Page 53

    4. Spread the retaining tabs (1) on each side of the memo ry module slot to release the memory module. (The edge o f the module opp osite the slot rises away from the computer.) 5. Remove the module (2 ) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect inse rtion into the memory m[...]

  • Page 54

    Keyboard Description Spare part number For use in Adriatic countries 5 95199-BA1 For use in Belgium 595199-A41 For use in Canada 595199-121 For use in the Czech Republic 595199-221 For use in France 595199-051 For use in Germany 595199-041 For use in Greece 595199-DJ1 For use in Hungary 595199-211 For International use 595199-B31 For use in Israel [...]

  • Page 55

    Remove the keyboard: 1. Position the computer upsi de down, with the front toward you. 2. Remove the three Phillips 2.5×5.0 and three Phill ips 2.5×6.0 screws that secure the keyboard to the computer. 3. Position the computer ri ght-side up, with th e front toward you. 4. Open the computer as far as p ossible. 5. Release the tabs along th e left [...]

  • Page 56

    7. Release the zero insertion fo rce (ZIF) connector (1) to which the keyboard cable is attached and disconnect the keyboard cable (2) from the system board. 8. Remove the keyboard. Reverse this procedure to insta ll the keyboard. 48 Chapter 4 Remova l and replacement procedures[...]

  • Page 57

    Top cover Description Spare part number Top cover (includes TouchPad board) 620605-00 1 Before removing the top cover: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices connected to the computer[...]

  • Page 58

    5. Remove the Phillips 2. 0×5.0 screw that secures the top cover to the computer. 6. Release the speaker cable (1) , power button Z IF connector (2) , TouchPad ZIF connector (3) , and TouchPad button ZIF co nnector (4) . 7. Lift the rear edge of the top co ver (1) until the top cover disengages from the base enclosure. 50 Chapter 4 Remova l and re[...]

  • Page 59

    8. Remove the top cover (2) . NOTE: The TouchPa d is glued to the top cover and is in cluded with the top cover spare part. Reverse this procedure to insta ll the top cover. Component replacement procedures 51[...]

  • Page 60

    Speaker assembly Description Spare part number Speaker assembly (includes cable) 620607-001 Before removing the sp eaker assembly: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices connected to [...]

  • Page 61

    6. Remove the speaker assembly by slid ing the left edge (4) from b eneath the br acket in the top cover. Reverse this procedu re to install the speake r assembly. Component replacement procedures 53[...]

  • Page 62

    Power button board Description Spare part number Power button board 595204-001 Before removing the power button board: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices connected to the computer[...]

  • Page 63

    TouchPad button board Description Spare part number TouchPad button board (with cable) 595203-001 Before removing the Touch Pad button b oard: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices c[...]

  • Page 64

    USB board Description Spare part number USB board 595205-001 Before removing the USB board: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices connected to the computer. 3. Disconn ect the power [...]

  • Page 65

    Reverse this procedure to insta ll the USB board. Component replacement procedures 57[...]

  • Page 66

    Power connector Description Spare part number Power connector (includes cable) 602743-001 Before removing t he power connec tor cable: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices connected[...]

  • Page 67

    Display assembly Description Spare part number 39.6-cm (15.6-in) HD LED BrightView display assembly with webcam and microphone for HP G56 computer 620589-001 39.6-cm (15.6-in) HD LED BrightView display assembly with micr ophone for HP G56 computer 620588-001 39.6-cm (15.6-in) HD CCFL BrightView display assembly with webcam and microphone for HP G56[...]

  • Page 68

    4. Pull the antenna cables throug h the opening in the top cover (3) and disengage th e cables from the clip in the ro uting channel lead ing to the display h inge (4) . 5. Disconn ect the webcam ca ble (select models only) (5) from the system board an d release it from the clips that attach it to the system board. CAUTION: Support the d isplay ass[...]

  • Page 69

    8. To replace any of the display a ssembly internal components, re move the following screw covers and screws: (1) Two Mylar screw covers on the display bezel bottom edge (2) Two Phillips 2.5× 3.0 screws The display screw covers are included in the Di splay Screw Kit, spare part number 595197-001. 9. Flex the inside edge of t he top (1) , the left[...]

  • Page 70

    12. Disconnec t the webcam module ca ble (1) from the webcam module, and remove the webcam module (2) . The webc am module is avail able using spare part number 626656-001. Reverse this pro cedure to install th e webcam module. 13. To replace the display inverter, disconnect the cables (1) on both side s of the inverte r. 14. Then use a flat flexib[...]

  • Page 71

    16. Remove the display hin ge covers (2) . The d isplay hinge covers ar e avail able using spare part number 600650-0 01. Reverse this proc edure to install the d isplay hinge covers. 17. To replace the display panel, remove the eight Phillip s 2.5 x 4.0 screws (1) that secure the display panel to the di splay enclosure. 18. Remove the display pan [...]

  • Page 72

    20. Remove the display pan el brackets (2) from the display panel. The display panel brackets are available using spare part number 5951 95-001. Reverse this proc edure to install the d isplay panel brackets. 21. To replace the wi reless antenna tran scei vers, lift up on the silver transceiver (1) and release the adhesive material from the disp la[...]

  • Page 73

    24. To replace the webcam cable, release the a dhesive tabs (3) from the display cover and lift up on the webcam cable (4) . Reverse this procedure to insta ll the microphon e and webcam cable s. Component replacement procedures 65[...]

  • Page 74

    System board NOTE: The system board spare part kit inclu des UMA gr aphics subsystem memory and replacement thermal material . Description Spare part number PCA UMA system board (AMD) 623915-001 PCA UMA system board (Intel) 623909-001 When replacing the system board, be sure that the following components are removed from the defective system board [...]

  • Page 75

    Remove the following cabl es from the system board: ● Power connector cable (see Power connector on page 58 ) ● USB board cable (see USB board on page 56 ) 1. Position the computer upright with the right side toward you. 2. To remove the optical drive cable, disconnect it from the system board (1 ) , and then remove the two Phillips 2.0×6.0 sc[...]

  • Page 76

    6. Pull the system board (3 ) away from the base enclosur e at an angle. The AMD system board is sh own below. The Intel system board is sh own below. Reverse this procedure to install the system board. 68 Chapter 4 Remova l and replacement procedures[...]

  • Page 77

    RTC battery Description Spare part number RTC battery 602745-001 Before r emoving the RTC b attery: 1. Shut down the computer. If you are un sure whether the computer is off or in Hibe rnation, turn on the computer, and th en shut it down through the operating system. 2. Disconn ect all external de vices connected to the computer. 3. Disconn ect th[...]

  • Page 78

    3. Lift the battery (2) out of the computer. Reverse this procedure to in stall the RTC battery. 70 Chapter 4 Remova l and replacement procedures[...]

  • Page 79

    Fan/heat sink assembly Description Spare part number Fan/heat sink assembly (includes r eplacement thermal materi al) for use with UMA systems (AMD) 630722-001 Fan/heat sink assembly (includes r eplacement thermal materi al) for use with UMA systems (Intel) 606573-001 Before removing the fan/heat sink assembly: 1. Shut down the computer. If you are[...]

  • Page 80

    2. Disconnect the fan cable from the syst em board. 3. Follow the sequence embossed on the heat sink to loosen the th ree Phillips 2.5 x 9.0 captive screws (1) that secure the fan/heat sink assembly to the system board. NOTE: Due to the adhesive quality of the thermal materia l located between the fan/heat sink assembly and system board comp onents[...]

  • Page 81

    6. Disconnect the fan cable from the syst em board. 7. Loosen the two Phillip s captive screws and the four Ph illips spring-loaded captive screws (1) that secure the fan/ heat sink asse mbly. NOTE: Due to the adhesive quality of the thermal material loca ted between the fan/heat sink assembly and system board comp onents, it might be necessary to [...]

  • Page 82

    Thermal pads and thermal paste must be installed on all surfaces before the fan/heat sink asse mbly is reinstalled. NOTE: Thermal pads and thermal paste are included wi th all fan/heat sink assembly, system board, and processor spare part kits. For computer models with the Inte l processor, th or oughly clean the th ermal material from the surface [...]

  • Page 83

    Processor NOTE: The processor spare p art kits include replac ement thermal material. Description Spare part number Intel Mobile Celeron 925 processor (2.3 GHz, 1-MB L3 cache, 800 MHz) 636636-001 Intel Celeron 900 processor (2.2 GHz) 534419-001 Intel Pentium T4500 processor (2.3 GHz) 591880-001 Intel Celeron T3500 processor (2.1 GHz) 625830-001 AMD[...]

  • Page 84

    Remove the proce ssor: 1. Turn the processor locking screw (1) one-half turn countercl ockwise until you he ar a click. 2. Lift the processor (2) straight up and remove it. NOTE: The gold triangle (3) on the processor must be alig ned with the triangle i con (4) embossed on the processor soc ket when you in stall the proc essor. Reverse this proced[...]

  • Page 85

    5 Setup Utility Computer Setup To view the drives install ed on the compute r, select Start > Comp uter . On models with a secondary hard d rive (drive D), the optical drive becomes drive E. The next drive added to the system, such as a new USB drive, is assigned the next available drive letter. Starting Setup Utility Setup Utility is a ROM-base[...]

  • Page 86

    3. Use the arrow keys to select a language, and then press enter key. 4. When a confirmation prompt wi th your l anguage se lected displays, press th e enter key. 5. To save your change and e xit Setup Utili ty, use the arrow ke ys to select Exit > Exit Saving Changes , and then press the enter key. Changes go into effect immediately. Navigating[...]

  • Page 87

    Restoring defa ult settings in S etup Utility The following procedure expl ains how to restore Setu p Utility default settings. If Setup Uti lity is not already running, begin at step 1. If Setup Utility is already running, begin at step 2. 1. Open Setup Utility by turn ing on or restarting the computer . When the Press the ESC key for Startup Menu[...]

  • Page 88

    Exiting Setup Utility You can exit Setup Utility with or without saving changes. ● To exit Setup Utility and save changes from the current session: If the Setup Utility menu s are not displayed, p ress the esc key to return to the menu display. Then use the a rro w keys to select Exit > Exit Saving Changes , and then press the enter key. ● T[...]

  • Page 89

    System Configuration menu Select To do this Language Support Change the language of Setup Utility. Button Sound (select models only) Enable/d isable the capacitive button tapping sound. Virtualization Technology (select models only) Enable /disable the processor Vi rtualization Technology. Processor C6 State (select models only) Enab le/disable the[...]

  • Page 90

    6 Specifications Computer specifications Dimensions Depth 24.7 cm (9.7 in) Width 37.4 cm (14.7 in) Height (front to rear) 3.3 cm to 3.8 cm (1.3 to 1.5 in) Weight (lowest weight config uration) 2.54 kg (5.59 lb s) Input power Operating voltage 18.5 V dc @ 4.74 A – 90 W Operating current 4.74 A Temperature Operating (not writing to optical disc) 0?[...]

  • Page 91

    39.6-cm (15.6-in) display specifications Dimensions Height 21.0 cm (8.27 in) Width 35.9 cm (14.1 in) Diagonal 39.6 cm (15.6) Number of colors Up to 16.8 million Contrast ratio 300:1 (typical) Brightness 200 nits (typical) Pixel resolution Pitch 0.259 × 0.259 mm Format 1280 × 800; HD: 1366 × 768 Configuration RGB vertical stripe Backlight LED or [...]

  • Page 92

    Hard drive specifications 320 GB* 250 GB* 160 GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm Weight 101 g 101 g 102 g Interface typ e SATA SATA S ATA Transfer rate 300 MB/sec 100 MB/sec 100 MB/sec Security ATA security ATA security ATA security Seek times (typical read, including setting) Single track 1.5 ms 3 ms 3 ms Average 12[...]

  • Page 93

    DVD±RW SuperMulti Double-Layer Drive with LightScribe specifications Applicable disc Read CD-DA, CD+(E)G, CD-MID I, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (P hoto-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD -RW, DVD- ROM (DVD-5, DVD-9, DVD-10, DVD-1 8), DVD-R, DVD-RW, DVD+R, D VD +RW,[...]

  • Page 94

    7 Backup and recovery Windows 7 backup and recovery To protect you r information, use Windows Backup and Restore to back up individua l files and folders, back up your entire hard drive (sel ect models only), create system repair discs (select models only), or create system restore points. In case of system failure, you can use the backup files to [...]

  • Page 95

    ● Save customized settings th at appear in a window , toolb ar, or menu bar by taking a screen shot of your settings. The scree n shot can be a time -s aver if you have to reset you r preferenc es. To create a scr een shot: 1. Display the screen you want to save. 2. Copy the screen image: To copy only the active wind ow, press alt+fn+prt sc . To [...]

  • Page 96

    NOTE: If you are unable to boot (start up) your computer and you cannot use the system repair discs you previously created (select models only ), you must purchase a Window s 7 operating system DVD to reboot the computer and re pair the operating system. For additi onal information, refer to the “Using a Windows 7 ope rating system DVD (pur cha s[...]

  • Page 97

    NOTE: If your computer includ es a solid-stat e drive (SSD), you may not have a recovery partitio n. Recovery discs have been included for computers that do not have a partition. Use these discs to recover your operatin g system a nd softwar e. To che ck for the presen ce of a re covery partition, select Start > Computer . If the p artition is p[...]

  • Page 98

    Linux backup and recovery Use the instructions in this section if SUSE Li nux SLED 11 is insta lled on you r computer. To protect your information, back up your files and folders. Then if the syst em fails , you can restore your important files from co pies. You ca n also use the options listed in this section to restore the operating system and pr[...]

  • Page 99

    8 Power cord set requirements The wide range input fe ature of the co mputer permits it to ope rate from any line voltag e from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor powe r cord set included wi th t he computer meets the requirem ents for use in the country or region where the e quipment is purchased . Power cord sets for[...]

  • Page 100

    Requirements for specific countries or regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands KEM A 1 Norway N EMKO 1 The People's Republic of China CCC 5 South Korea EK 4 Swed[...]

  • Page 101

    9 Recycling Battery When a battery has reached the end of its useful life, d o not dispose of the battery in genera l household waste. Follo w the local laws a nd regulati ons in your area for computer b attery disposal. Display WARNING! The backlight contains mercury. Exercise caution whe n removing and handlin g the backlight to avoid dama ging t[...]

  • Page 102

    Perform the following ste ps to di sassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the le ft and right inside edges (1) and th e top and bottom i nside edges (2) of the display beze l until the bezel disengag es from the display assembly. 3. R[...]

  • Page 103

    4. Remove the two screws (1) that secure each hinge to the display enclosure a nd lift up to remo ve the display hinge covers (2) . 5. Remove all screws (1) that secure the displa y panel a ssembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclos ure. 7. Turn the display panel assemb ly upside down and remo[...]

  • Page 104

    8. Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to t he display panel frame. 9. Remove the display panel frame (2) from the display panel. 10. Remove the screws (1) that secure the backlight cover to the display panel. 11. Lift the top edge of the backlig ht cover (2) and swing it outward. 12. Remove the ba[...]

  • Page 105

    14. Remove the backlight cables (1) from the clip (2) in the display pa nel. 15. Turn the display pane l upside down. 16. Remove the backlight frame from th e display panel. WARNING ! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damag ing this compon ent and causin g exposure to the me rcury. Di[...]

  • Page 106

    17. Remove the backlight from the backlight frame. 18. Disconnec t the display cabl e (1) from the LCD panel. 19. Remove the screws (2) that secure the LCD panel to the d isplay rear panel. 20. Release the LCD panel (3) from the d isplay rear panel. 21. Release the tape (4) that secures th e LCD panel to the display rea r panel. 98 Chapter 9 Recycl[...]

  • Page 107

    22. Remove the LCD panel. 23. Recycle the LCD panel and backlight. Display 99[...]

  • Page 108

    Index A AC adapter identifying 14 spare part numbers 24 AC adapter light, identifying 9 action keys, identifying 8 administrator password 80 antennas identifying 12 remov al 64 applications key, Windo ws 8 audio, product description 3 audio-in (microphone) jack, identifying 10 audio-out (head phone) jack, identifying 10 B backing up Linux 90 Window[...]

  • Page 109

    drives boot order 81 preventing damage 30 DVD±RW SuperMulti Double- Layer Drive with L ightScribe identifying 9 precautions 30 product description 3 remov al 39 spare part numbers 23, 39 specifications 85 E electrostati c discharge 31 esc key, identifying 8 Ethernet, product description 3 exiting Setup Utility 80 external monitor port, identifying[...]

  • Page 110

    power conn ector cable remov al 58 spare part number 18, 58 power connector, identi fying 9 power cord identifying 14 spare part numbers 24 power cord set re quirements 91 power light, identifyin g 6 power requ irements, prod uct description 4 power-on password 80 processor product description 1 remov al 75 spare part numbers 18, 75 processor C6 st[...]