Huawei HG622 manuel d'utilisation

HUA WEI HG622 Home Gateway User Guide HUA WEI TECHNOLOGIES CO., L TD.[...]

HUA WEI HG622 Home Gateway V100R001 User Guide Issue 02 Date 2010-06-25 Part Number 202193 Huawei Technologies Co., Ltd. provides cus tomers with comprehensive technical support and service . Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen[...]

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this do cument may be reproduced or transmitted in any form o r by any means without prior w ritten consent of Hu awei Technologies Co., Ltd. The product de scribed in this manua l may include copy righted software of H uawei Technologies C o., Ltd and possibl e licens[...]

Contents 1 Warnings and Prec autions ....................................................................... 1 2 Connecting the Cables and Powering O n................................................ 4 2.1 Simple Connect ion .......................................................................................4 2.2 Connecting On e Telephon e .....[...]

7.2 Interfaces a nd Butt ons ................................................................................21 7.3 Default Sett ings .......................................................................................... 22 7.4 Technical Sp ecif ications.............................................................................22 ii[...]

1 Warnings and Precautions T o use th e device properly and safely , read these warnings and precau tions carefully and strictly observe them during operatio n . Unless otherwise specified, the term "device" refers to the device and its access ories. Basic Requirements z During storage, transportation, and operation of th e device, keep i[...]

Precautions for Using W ireless Devices z When using the devic e, ensure that the antenna of the device is at least 20 cm away from all persons. z Do not use the device where us ing wire less devices is prohibited or may cause interference or danger . z The radio waves generated by the device may interfere with the operation of electronic medical d[...]

Maintenance z If the device is n ot used for a long time, power it off, and then remove al l the cables connected to it. z If any exception occurs , for example, if the d evice emits any smoke or unusual sound or smell, stop using th e device immediately , power it of f, remove all the cables connected to it, and th en cont act an authorized servic[...]

2 Connecting the Cables and Powering On 2.1 Simple Connection If your telephone line is used for the broadb and network access only and if you do not need to use the cables. a telephone, take the following figu re as a reference for connecting 1 2 3 DSL LAN4 LAN3 LAN2 L AN1 RESET POWER 1. Telephone jack on the wall 2. Computer 3. Power adapter If t[...]

2.2 Connecting One Telephone If your telephone line is used fo r both the broadband network access and a telephone connection, take the following fig ure as a reference for connecting the cables. 1 4 5 PHONE MODEM LINE 2 3 DSL LAN4 LAN3 LAN2 L AN1 RESET POWER 1. Telephone jack on the wall 2. Splitter 3. Telephone 4. Computer 5. Power adapter 5[...]

2.3 Connecting Multiple Telephones If your telephone line is used for the broa dband network access, telephone connections, and fax connections, take the following figur e as a reference for connecting the cables. 1 4 5 PHONE MODEM LINE 2 3 DSL LAN4 LAN3 LAN2 LAN1 RESET P OWER 1 6 7 7 8 3 1. Telephone jack on the wall 2. Splitter 3. Telephone 4. Co[...]

2.4 Powering On To power on the HG622, press th e ON/OFF button on the side panel of the HG622. After you power on the HG622, the DSL indica tor blinks (for less than thr ee minutes), which indicates that the HG622 is being activated. Later, th e DSL indicator turns solid on. The POWER indicator is also solid on, which indi cates that the HG622 is [...]

Step 1 Click Advanced > PIN in the navigation tree to d isplay the PIN Page. Step 2 Enter the orig inal PIN number in the PIN text box. Step 3 Click the Submit button to finish the settings on the PIN Pag e. Use the default values for the o ther para meters. In general, they do not need to be configured. 3.2 Configuring the DSL uplink By configu[...]

Step 4 Set LAN parameters. 1. In the navigation tree, choose Basic > LAN . 2. Set the IP address and Subnet mask of the LAN connection. 3. Select Enable for DHCP serve r, and then set the corresponding parameters. 4. Click Submit . After you compl ete the preceding settings, you c an surf the Internet. You need to perform the preceding operation[...]

You need to perform the preceding op er ations only once for creating a network connection. After the network connec tion is created, to access the network, double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box. 4 Configuring the Wireless Network Connection If a wireless network adapter is installed on[...]

The WPS indicator of the HG622 becomes on fr om the blinking stat e, indicating that the HG622 is connected to your PC through the WLAN. This state lasts 300s. Then the WPS indicator turns off. If the WPS indicator does not blink, it indicates that the WPS function cannot be enabled. Note that the WPS function can be used only when the wireless net[...]

5. Click OK to close the dialog box, and th en close the Computer Management window. Step 3 Configure the wi reless network connection on your computer. 1. Choose Start > All Programs > Accessori es > Communications > Network Connec tions . 2. In the Network Connections window, right-click Wireless Networ k Connection to displa y a shor[...]

Step 5 Click Submit to save the settings. After you chang e the password successfully, the current page ju mps to the page for logging in to the Web-based configurati on ut ility. To log in to the Web-based configuration utility, enter th e new password, and then click Submit . If you forget the user name or password that has been changed , you can[...]

Step 5 Enter the new access password in the WPA pre-shared key text box. Step 6 Select AES fro m the WPA encryption drop-down combo box. Step 7 Click Submit to save the settings. 5.4 Changing the Login IP Address To make the login IP address easy to remember, you can change the IP addr ess after logging in to the Web-based conf iguration utility. T[...]

After files are downloaded, you can view file downloading records on the Download History tab. 5.6 Restoring Default Settings You can quickly restore the d efault sett ings of the HG622 by pressing the RESET button on the rear panel. To restore th e default settings, press and hold the RESET button for over six seconds after the HG622 is powered on[...]

3. inal is prope rly connected to the socket through OWER indicator is still off, contact an authorized maintenance Step 2 utes. Then, check L indicator blinks for a l ong time, perform further checks as 1. to the connections betw een the telephone lines and the 2. gnetic or electric f ields. Replace r still blinks and does not tur n solid on, cont[...]

operator. Step 6 dial-up softwa re to dial successfully, perform 1. n use the PPP dial-up Step 7 proxy server of the d, do as follows: 5. apply to dial-up or VPN Step 8 e Web sites to check whether the terminal can access inal still cannot access Web s ites, contact your network service Check whether you can use the PPP dial-up software to dial suc[...]

If the problem persists, cont act your service provider. What can I do if sometimes the terminal cannot access the Internet through a WLAN connection or if the WLAN conn ection is unsteady? Check the positions of your terminal and your computer. Ensure that they are far from the elec tric appliances, such a s microwave ovens, refrigerators, o Step [...]

7 Appendix 7.1 Indicators POWER DSL INTERNET WLAN WPS LAN1 LAN2 LAN 3 LAN4 USB 23 4 5 6 7 8 91 0 1 No. Indicator Status Description On The HG622 is powered on. 1 POWER Off The HG622 is powered off. On The HG622 is activated. Blinking The HG622 is being activated. 2 DSL Off The HG622 is powered off. 19[...]

No. Indicator Status Description On z The HG622 works in routing mode. z The WAN connection is set up . z No data is being transm itted. Blinking z The HG622 works in routing mode. z The WAN connection is set up . z Data is being tra nsmitted. 3 INTERNET Off z The HG622 works in bridge mode or in routing mode. z No WAN connection is set up. On z Th[...]

7.2 Interfaces and Buttons DSL LAN4 LAN3 LAN2 LA N1 RESET POWER ON/OFF WPS WLAN 1 2 34 5 6 7 9 8 10 11 No. Interface or Button Description 1 DSL Used to conn ect HG622 to the MODEM interface on the splitter or to the telephone jack on the wall. 2-5 LAN1–LAN4 Used to connect Ethernet d evices, such as PC s and switches. 6 RESET Used to restore the[...]

Description No. Interface or Button 9 WLAN Used to enable or disable wireless n etwork function quickly. 10 WPS Used to set up a wireless connection between the HG622 and a wireless terminal easily and safely. 11 USB Used to connect a US B device, such as a Huawei HSPA data card. 7.3 Default Settings Parameter Setting IP address of the L AN interfa[...]

Item Specification Weight About 350 g VDSL2 standards G.993.2 Annex B PSD Mask ITU G.994.1 (G.hs) ADSL2+ standard ITU G.992.5 (G.dmt.bitplus) Annex A ADSL2 standards ITU G.992.3 (G.dmt.bis) Annex A ITU G.992.3 (G.dmt.bis) Annex L ADSL standards ITU G.992.1 (G.dmt) Annex A ITU G.994.1 (G.lite) ANSI T1.413 Issue 2 Standards WLAN standard 802.11b, 802[...]

HUA WEI TECHNOLOGIES CO., L TD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www .huawei.com Part Number: 202193[...]