Humminbird 1155C manuel d'utilisation

[...]

[...]

i T hank Y ou! Thank y ou for choosing Humminbird®, America's #1 name in fishfinder s. Humminbird® has built its reputation by designing and manufacturing top-quality , thoroughly reliable marine equipment. Y our Humminbird® is designed for trouble-fr ee use in even the har shest marine environment. In the unlikely event that your Humminbir[...]

ii T able of Contents 1100 Series™ Introduction 1 How GPS and Cartograph y W ork 1 MMC/SD Slot 2 Software Updates ............................................................................................................... ......................... 3 Accessory Bus 3 V ideo and GPS Output Connectors .............................................[...]

iii T able of Contents Vi ew s 28 V iews and Readouts ............................................................................................................. ..................... 28 Bird’s Eye No Readouts V ie w .................................................................................................... ................ 29 Bird’s[...]

iv Cursor to W aypoint (Chart or Combo view only) ........................................................................................ 69 Save Current T rack ............................................................................................................ ........................ 69 Clear Current T rack ..............................[...]

v T able of Contents Chart Menu T ab 89 Chart Detail Level ............................................................................................................. ......................... 90 Map Borders .................................................................................................................... .......................[...]

vi T able of Contents Date Format (Advanced, International only) .............................................................................................. 104 Digits Format (Advanced) ........................................................................................................................ 104 NMEA Output (Advanced) .............[...]

1100 Series™ Introduction Y our 1100 Series™ Chartplotter comes in the following configuration: • Humminbird® 1155c Chartplotter: Networkable GPS Chartplotting System, GPS Receiver included. How GPS and Cartogr aphy W ork Y our 1100 Series™ Chartplotter supports GPS and chartplotting, and uses GPS to determine your position and display it [...]

The GPS Receiv er included with your 1100 Series™ Chartplotter allows y ou to combine easy-to-use chartplotter and navigation capabilities. T he following GPS functionality is curr ently supported by the 1100 Series™ Chartplotter when it is connected to the included GPS receiver: • V iew current position • V iew current tr ack (breadcrumb t[...]

Softwar e Updates Use the MMC/SD slot to update the software ver sion of your control head. T o update the software in your control head, plug in the appropriate MMC/SD card that contains a softw are update file; the unit will recognize it, will tell you what softw are ver sion your control head is currently running, and will ask y ou if you want t[...]

Installation Overvie w Please read all instructions that are rele vant for y our configuration before beginning the installation process. NO TE: Installation procedures will depend on pr oduct configuration. Optional “Y” Cable Pow er Temperature GPS Receiver WeatherSense® Video Signal 1 2 3 5 6 7 Speed through water GPS Out 4 8 9 The 1100 Seri[...]

Inside the boat there is often a channel or conduit used for other wiring, this can be used to route cables. Be sure to route the cables as far as pr actical from the antenna cable of VHF radios or tachometer cables to reduce the possibility of interference. T he GPS r eceiver cable should not be cut, and care should be used not to damage the cable[...]

Control Head Installation Y ou have two choices for mounting y our 1100 Series™ control head, Gimbal mounting , where you use a surface on the boat, such as the dash, to mount the control head so that it can be tilted up or down, or In- dash mounting . Gimbal Mounting the Control Head If you are gimbal mounting the Humminbird® 1100 Series™, y [...]

NO TE: When drilling holes in fiberglass hulls, it is best to start with a smaller bit and use pr ogressively lar ger drill bits to reduce the chance of chipping or flaking the outer coating. Fill all holes with marine grade silicone sealant. NO TE: Y ou must hav e underside access to the mounting location to pass the cables through to the surf ace[...]

6a. If the cables must pass through a hole directly beneath the mounting bracket, mark and drill an additional 1" (25 mm) hole centered between the four mounting holes. Route the cables thr ough the 1" hole. Place the gimbal over the mounting surface hole, then use it to mark the position of the two mounting screws, closest to the center [...]

9. Thr ead the cables through the opening in the back of the cable collector cov er . 10. Insert cable connectors into the proper recesses on the cable collector insert. T he cable connectors are ke yed to pre vent rev erse installation, so be careful not to f orce the connectors into the wrong slots. If you don’t hav e a cable for ev ery hole in[...]

12. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws provided. 13. Place the control head back onto the mounting bracket. Plug the assembled cable collector into the back of the control head, pushing gently but steadily until you feel the collector snap into place. Cable connectors and cable sockets ar[...]

In-Dash Mounting the Control Head If you are in-dash mounting the control head, start b y placing the components on the surfaces where y ou intend to install them before installation. Make sur e that the surfaces you ha ve chosen provide adequate protection from wa ve shock, and that all cables can reach the contr ol head. NO TE: If a cable is too [...]

5. Insert the control head through the mounting hole from the fr ont side of the dash. Place a washer , lock w asher , and wing nut onto each threaded r od and tighten fully . 6. Thr ead the cables through the opening in the back of the cable collector cov er . 7. Insert cable connectors into the proper r ecesses on the cable collector insert. The [...]

9. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws provided. 10. Plug the assembled cable collector into the back of the control head, pushing gently but steadily until you feel the collector snap into place. Cable connectors and cable sock ets are ke yed to prevent r ever se installation, so be caref[...]

Connecting the Control Head P ower Cable to the Boat A 6' (2 m) long power cable is included to supply pow er to the control head. Y ou may shorten or lengthen the cable using 18 gauge multi-stranded copper wire. CA UTION: Some boats have 24 or 36 V olt electric systems, but the control head MUST be connected to a 12 VDC power supply . The con[...]

GPS Receiver Installation T o optimize performance of the GPS receiver , mount it in an area that has full exposure to the sky . The effective area of r eception is 10° above the horiz on. Different circumstances determine the mounting method appropriate for your GPS r eceiver . If you have… Then use: The pinouts of the NMEA cable ar e as follow[...]

2. Scr ew on the receiv er base to the stem first, making sure that the stem pipe does not protrude from the receiver base. T his adds pr otection to the cable when pulling it through the pipe stem. In addition to this, de-burr the pipe edges to reduce cable abrasion. 3. Use electrical tape to secure the NMEA cable to the receiv er cable as shown. [...]

Access Under Mounting Location Follow these steps to deck mount the GPS r eceiver when routing the cable down thr ough the mounting location: 1. Determine the best location, then test route the 20' (6 m) cable from the mounting location to the control head. NO TE: Installation details may vary with unit configuration. 2. Mark the mounting loca[...]

NO TE: Remember to seal screw holes and drilled holes as needed with marine-grade silicone sealant to protect your boat from water damage. 3. T he GPS receiver has two wir e routing notches. Use the cable notch closest to the intended cable route. 4. With the cable routed, position the GPS receiv er in the planned mounting location and mark the mou[...]

T esting the System Installation After you have completed the installation of the contr ol head and any other accessories such as the GPS receiver , and have made all the cabling connections required, you must test the installation bef ore using the system. T o test the installation: 1. Press the POWER/LIGHT key on the control head once to turn on [...]

Getting Started - Using Y our 1100 Series™ Y our 1100 Series™ Chartplotter user interface is easy to use. A combination of keys, differ ent views, and situation-specific, customizable menus allows you to control what y ou see on the color display . Refer to the following illustration, and see K ey Functions , Vie ws , and The Menu System for mo[...]

P ow ering Up the Control Head T urn on your Chartplotter by pressing the POWER/LIGHT key . The T itle screen is displa yed until the Chartplotter begins operation. After the T itle screen is display ed, a 30 second Navigation W arning screen is shown. Press the MENU ke y during the time that the T itle screen is displayed to vie w the Start-Up Men[...]

What’s On the Displa y The 1100 Series™ Chartplotter can displa y a variety of useful information. Chart Bir d's Eye Combo V iew 22 Cursor Info Box: indicates the Latitude and Longitude of the cursor position, the distance to travel to the cursor position and the bearing to the cursor position is shown with a GPS receiver . A waypoint can [...]

23 is shown with navigation active. T rack: Detailed position history , displayed as a breadcrumb trail of trackpoints. Cartography Map Scale Selectable Readout Boxes Course: the current direction the boat is traveling measured in degrees from North. Bearing: Bearing to Waypoint XTE: Cross T rack Error Speed: the measurement of the boat’s progres[...]

Ke y Functions Y our 1100 Series™ user interface consists of a set of easy-to-use keys that w ork with various on-screen views and menus to give you flexibility and contr ol over y our fishing experience. Y our control head has the following ke ys: • POWER/LIGHT key • EXIT key • VIEW key • 4-WA Y Cursor Control k ey • MENU key • VIEW [...]

MENU Ke y The MENU k ey is used to access the menu system. Start-Up Options Menu - Pr ess the MENU key during the po wer up sequence to view the Start -Up Options menu. X-Pr ess™ Menu - Press the MENU ke y once for the X -Press™ Menu. T he X -Press™ Menu allo ws you to access frequently-used settings without ha ving to navigate through the wh[...]

EXIT Ke y The EXIT k ey has multiple functions, depending on the situation: • If an alarm is sounding, pressing EXIT will cancel the alarm. • If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view . • If a menu is active, pressing EXIT will return to the pr evious lev el in the menu system. • Pressing EXIT w[...]

MARK Ke y Press the MARK key while in an y view to mark the position of a wa ypoint, either at the current boat location, or , if the Cur sor is active, at the current Cursor location. The MARK k ey only functions if you ha ve the GPS receiver connected, or if y ou have enabled Screen Snapshot from the Accessories menu tab. If you ha ve enabled the[...]

Vi ew s The vie ws available on y our 1100 Series™ are: GPS Diagnostic Vie w is the def ault view until GPS communications are established. At that point, all the other views become available. W hen the VIEW key is pr essed, the display cycles through the a vailable views. When the EXIT k ey is pressed, the display cycles thr ough the available v[...]

Bird's Ey e No Readouts V iew Bird's Eye No Readouts V ie w shows a 3D per spective view like all the other Bir d's Eye V iews, but without readouts. See Bird's Ey e Vie w f or more information. T rack 3 Cartography 4 Bird's Eye No Readouts V iew (Standar d) 1 2 3 4 Waypoint 1 Boat Icon 2 29[...]

Route 5 T rack 6 Boat Icon 7 Bird's Eye No Readouts V iew (Na vigating) 1 2 3 4 Cartography 1 Waypoint 2 Arrival Alarm Limits 3 Off Course Limits 4 5 7 6 30[...]

Bird's Ey e V iew Bird's Eye V ie w shows a 3D per spective view of the tr ack and the chart land contour from a point above and behind the boat (the eye point). As the boat turns, the eye point mov es to follow the boat. W hen you press the 4-W A Y Cursor key in any of the Bird’s Eye V ie ws, the position of the eye point will shift. T[...]

NO TE: If there is only one wa ypoint in a route, the Next W aypoint and the End W aypoint inf o boxes will display the same information. Bearing: Direction to Destination Waypoint measured in degrees from North 3 Course: the current direction the boat is traveling measured in degrees from North. 2 Next Waypoint 1 Speed: the measurement of the boat[...]

Chart/Bird’s Ey e Combo V iew Chart/Bird’s Eye Combo V ie w shows both the Chart and Bird’s Eye vie ws in a combination split screen. Y ou can perform any of the functions for either of these vie ws, but only when the view you w ant to control is selected as the active side (see Navigation X -Pr ess™ Menu: Active Side f or more information)[...]

Bearing: Direction to Destination Waypoint measured in degrees from North 3 Course: the current direction the boat is traveling measured in degrees from North. 2 Next Waypoint 1 Speed: the measurement of the boat’s progress across a given distance; the speed measurement provided by GPS. 5 NEXT: Next Waypoint in the Route 6 TTG: Time to Go to W ay[...]

Chart/Chart Combo V iew Chart/Chart Combo Vie w sho ws two versions of the Chart vie w in a combination split screen, so that you can see the position of the boat on one side while you zoom in or perform other functions on the other . Y ou can perform any of the functions for the Chart vie w , but only on the side of the view y ou have selected as [...]

NO TE: All views except the Bird's Eye/Chart Instrument V iew share the same set of 5 selectable r eadouts that can all be set one way f or navigation mode and another wa y for non-navigation mode. W hen you change the readout displays on one of these vie ws, you also are changing them on all the other views that shar e the same configuration.[...]

Chart No Readouts V iew Chart No Readouts Vie w shows cartograph y like all the other Chart V iews, but without r eadouts. See Chart Vie ws f or more information. Map Scale Waypoint 1 Cartography 2 Course Projection Line 3 4 Boat Icon 5 T rack 6 Chart No Readouts Vie w (Standard) 1 2 3 4 5 6 37[...]

Map Scale Route 1 Cartography 2 Course Projection Line 3 Next Waypoint 4 5 Boat Icon 6 T rack 7 Chart No Readouts Vie w (Navigating) 1 2 3 4 5 6 7 38[...]

Chart V iew Chart Vie ws - T he standard Chart, Chart No Readouts, and Chart/Chart Combo V iews, as w ell as the Chart side of the Chart/Bird's Eye Combo V ie w and the Chart/Bird's Eye Combo Instrument V ie w , all show cartography from the built -in UniMap™ or an optional MMC/SD map for the ar ea surrounding your curr ent position. Th[...]

NO TE: All views except the Bird's Eye/Chart Instrument Vie w share the same set of 5 selectable readouts that can all be set one wa y for na vigation mode and another way f or non-navigation mode. When you change the readout displa ys on one of these views, you also ar e changing them on all the other views that share the same configur ation.[...]

NO TE: Y ou may also choose Chart No Readouts V iew if you pref er . Bearing: Direction to Destination Waypoint measured in degrees from North 3 Course: the current direction the boat is traveling measured in degrees from North. 2 Next Waypoint 1 Speed: the measurement of the boat’s progress across a given distance; the speed measurement provided[...]

Chart Instrument V iew Chart Instrument Vie w displays a digital panel at the top of the screen. T his view pro vides a digital compass, XTE graphic, and up to 10 readouts. NO TE: Only the standard configuration r eadouts are shown in the gr aphics. Readouts can be customized to suit your needs. Course: the current direction the boat is traveling m[...]

NO TE: If there is only one wa ypoint in a route, the Next W aypoint and the End W aypoint inf o boxes will display the same information, both for that next w aypoint.. XTE (Cross T rack Error): Distance of Boat from Route 1 Compass 2 Cartography 3 Course Projection Line 4 Next Waypoint 5 Boat Icon 6 T rack 7 Map Scale 8 ET A: Estimated time of arr[...]

Chart/Bird's Ey e Instrument V iew Chart/Bird's Eye Instrument V ie w displays a digital instrument panel at the top of the scr een. This vie w provides a digital compass, XTE graphic, and up to 10 r eadouts. NO TE: Only the standard configuration r eadouts are shown in the gr aphics. Readouts can be customized to suit your needs. Course:[...]

NO TE: If there is only one wa ypoint in a route, the Next W aypoint and the End W aypoint inf o boxes will display the same information, both f or that next wa ypoint. Bearing: Direction to Destination Waypoint measured in degrees from North 1 Course: the current direction the boat is traveling measured in degrees from North. 2 XTE (Cross T rack E[...]

Screen Snapshot V ie w Screen Snapshot V iew displays and allows you to view scr een snapshot thumbnails captured to an optional-purchase MMC/SD card installed in your unit. In addition, when y ou are in the Screen Snapshot V iew , Delete Image and Delete All Images are added to the X-Pr ess™ menu. The Scr een Snapshot V iew displays up to thr ee[...]

For more inf ormation, see Accessories Menu T ab: Using Screen Snapshot and Scr een Snapshot X -Press™ Menu . W aypoint T humbnails: On the Chart Vie w , you can use the INFO k ey to view Screen Snapshot as W aypoint thumbnails. W aypoints thumbnails are cr eated while the Snapshot feature is turned on. T hey are link ed to snapshot waypoints. Be[...]

When you start a scr een snapshot, you will see a message that a waypoint has been cr eated at the point where your cursor is on the scr een, and the screen will freez e while the snapshot is being saved to the MMC/SD card. A status dialog box will appear that shows the progr ess of the save as a per centage, and that displays the numbered file nam[...]

Chart Orientation All the chart views allow you to choose the orientation of the chart. W hen North-Up orientation is selected, T rue North is shown at the top of the display . In other w ords, objects located to the north of the boat are dra wn above the boat. W hen Course-Up orientation is selected, the direction of motion of the boat is shown at[...]

V iewing Cartogr aphy In the Chart or Combo Vie ws, there are sev eral cartograph y-related functions that y ou can access using various keys. Panning: Use the 4-W A Y Cursor keys to mov e the chart around on the display in the direction of the k ey being pressed. When y ou do this, a Bullseye Cursor is dr awn at the top of the screen and is link e[...]

Chart Info: Use the INFO ke y to get detailed information about the chart. If the cursor is active, y ou will see information about the chart objects located near the cursor . If the cursor is not active, the Chart Info menu will appear . Y ou can select the nearest port, the nearest tide station, or the near est current station to see information [...]

Introduction to Na vigation Use the 1100 Series™ to establish waypoints at areas of inter est and to navigate to those wa ypoints via a saveable route (r epresenting the shortest intended distance between w aypoints). Y ou can also view and save tracks, which r epresent the actual path of the boat. W aypoints, Routes and T racks W aypoints are st[...]

Routes link two or more wa ypoints together to create a path for na vigation, and are used in trip planning. Y ou can link individual waypoints together by using the GO T O key . A route represents your intended navigation and shows the shortest path from each w aypoint to the next. As you tr avel a route, sta ying on the route line is the most eff[...]

T o make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor k eys to select a sort order: • Name shows the waypoints alphabetically • Time sho ws the most recently-cr eated waypoint fir st • Distance shows the closest waypoint fir st. Delete a waypoint: F rom the W aypoints submenu, select Delete and pr ess the [...]

Add a W aypoint T arget or T rolling Grid Add or Remove a W a ypoint T arget: F rom the W aypoints submenu (accessed fr om the Navigation main menu), select T arget and press the RIGHT Cursor key to displa y a list of waypoints. Select the wa ypoint you want to target. A target consisting of concentric cir cles centered on the selected wa ypoint wi[...]

Add or Remove a T rolling Grid: From the W aypoints submenu (accessed fr om the Navigation main menu), select Grid and press the RIGHT Cursor ke y to display a list of wa ypoints. Select the waypoint to which you w ant to add the grid. The tr olling grid will appear on all of the navigation views, and can be used as a guide when tr olling around a [...]

Sav e, Edit or Delete a Route Save the curr ent route: While you are navigating, the curr ent route can be sav ed. From the Navigation X -Press™ Menu, select Sav e Current Route and press the RIGHT Cursor k ey . Navigation will continue. Display the Routes submenu: From any view , press the MENU key twice to display the Main Menu System, then use[...]

Edit, Delete or Hide Sav ed T racks Display the T racks Submenu: F rom any view , press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Na vigation tab. Select T racks and press the RIGHT Cursor key to displa y the T racks submenu. Edit a saved tr ack: From the T racks submenu, select Edit and press t[...]

Activate MOB navigation: Press and hold the GOT O key f or more than 1.5 seconds to activate the Man Overboard (MOB) function. Cancel MOB navigation: From the Navigation X -Press™ menu, select Cancel MOB and pr ess the RIGHT Cursor key . Canceling MOB navigation remo ves the route and any w aypoints created using the GO T O key , but does not rem[...]

T he Menu System The menu system is divided into easy -to-use menu modules. T he main components of the menu system are: Start-Up Options Menu: Press the MENU k ey during the power up sequence to vie w the Start-Up Options menu. See Start-Up Options Menu. X-Pr ess™ Menu: T he X -Pr ess™ Menu allows you to access the settings that are changed fr[...]

QUICK TIPS: • When your cursor is within a menu tab, press the EXIT ke y to jump directly to the top of the tab. • If you are at the bottom of a menu tab, press the DOWN Cursor ke y to jump directly to the top of the tab. • If you're at the left or right of a menu tab, you can also jump to the other side by pressing the LEFT or RIGHT cur[...]

Setup T ab, Normal User Mode Setup T ab, Advanced User Mode 62[...]

Start -Up Options Menu Press the MENU key when the T itle scr een is displayed to access the Start -Up Options menu. Use the UP or DOWN 4-W A Y Cursor k eys to position the cursor , then the RIGHT Cursor key to select one of the following choices. If you w ait too long, the system will default to whichev er menu mode happens to be highlighted: • [...]

Simulator Use the Simulator to learn how to use your 1100 Series™ befor e taking your boat on the water . The Simulator is a very powerful tool that simulates on-the-w ater operation, pro viding a randomly-updated displa y . W e recommend going through this manual while using the Simulator , since all of the menus function and affect the display [...]

Self T est Self T est displays results fr om the internal diagnostic self test, including unit serial number , Printed Circuit Board (PCB) serial number , softw are revision, total hour s of operation and the input voltage. IP and MA C addresses are also display ed. Accessory T est Accessory T est lists the accessories connected to the system. NO T[...]

GPS Diagnostic V iew GPS Diagnostic Vie w , which is only available when a GPS Receiv er is attached to your 1100 Series, shows a sky chart and numerical data from the GPS receiv er . T he sky chart sho ws the location of each visible GPS satellite with its satellite number and a signal strength bar . A dark gr ay bar indicates that the satellite i[...]

Navigation X -Press™ Menu The Navigation X -Press™ Menu provides access to the settings most frequently used. Press the MENU ke y once while in the Navigation V iews (Chart or Bir d's Eye V iews) to access the Navigation X -Press™ Menu. NO TE: Menu choices will vary depending on system settings, such as whether you are currently na vigat[...]

Active Side Active Side allows you to select which side of a Combo V ie w will be active; key pr esses will only affect the active side of the scr een. When a menu is display ed, the non-active side of the screen will be gray ed out; at any other time, a green arr ow will point to the active side. T he Active Side menu choice is only available when[...]

T he W a ypoint Submenu contains the following menu choices: Edit allows you to edit the Name, P osition (Latitude and Longitude) and select the Icon that will be used to represent the wa ypoint in the Chart and Combo V iews. Delete allows you to delete a wa ypoint from the list of sav ed waypoints. T arget allows you to apply a target to a waypoin[...]

Clear Current T r ack Clear Current T rack allows you to clear the current track being displayed and start a new tr ack at the present position. T o Clear Current T r ack: 1. Highlight Clear Current T rack on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to initiate clearing the curr ent track. 3. The Confirm dialog [...]

Cancel Navigation (Only when navigating) Cancel Navigation discards the curr ent route and exits Navigation Mode. T his menu choice will only appear when you are currently na vigating a route. T his will not delete a previously -saved r oute. T o Cancel Na vigation: 1. Highlight Cancel Navigation on the Navigation X -Pr ess™ Menu. 2. Use the RIGH[...]

Remov e Grid (Only if a Grid is active) Remove Grid remo ves the waypoint grid fr om the display . This menu choice will only appear when a grid has already been applied to a waypoint. T o Remove a Grid: 1. Highlight Remove Grid on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to remo ve the grid. W aypoint [Name] (M[...]

Select Readouts Select Readouts sets individual digital readouts on all the views that can display readouts. T his featur e allows you to select what information will be displa yed in each of a variable number of fixed-position readouts arranged at the bottom of the scr een on various views, or whether a particular readout will be turned off , disp[...]

NO TE: Y ou can set a second set of 5 readouts with na vigation mode settings as well, so that, when you are navigating, these views contain na vigation data instead of the regular settings. See Navigation X -Pr ess™ menu: Select Nav Readouts f or more information. NO TE: Some readout boxes are limited to displa y non-navigation information only [...]

T o Select Readouts: 1. Highlight Select Readouts on the Navigation X -Press™ menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to initiate this pr ocedure. 3. The Select Readouts submenu will appear , showing a list of all readouts. Use the UP or DOWN Cursor keys to select a particular r eadout position, then use the RIGHT or LEFT Cursor ke ys [...]

Select Nav Readouts Select Nav Readouts sets the individual digital readouts that will be used only during navigation on all non-instrument views. T his featur e allows you to select what information will be displayed in each of a v ariable number of fixed-position readouts arranged at the bottom of the screen on various views, or whether a particu[...]

Bearing Bearing is the direction to a destination waypoint measured in degrees from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). CMG/SMG Course Made Good/Speed Made Good. Course Made Good is the angle between the starting point on a route and the current position of the boat. The goal is to have CMG and T rac[...]

Select Instrument Readouts Select Instrument Readouts sets individual digital r eadouts on all of the instrument views. T his feature allo ws you to select what information will be display ed in 8 of the 10 fixed-position readouts arranged at the bottom of the screen on the special instrument vie ws; it also allows you to select whether a particula[...]

Chart/Bird's Eye Instrument V iews with 8 Custom Readouts Chart/Bird's Eye Instrument V iews with 8 Def ault Readouts 79[...]

Screen Snapshot X -Press™ Menu (Screen Snapshot V iew only) The Screen Snapshot X-Pr ess™ menu provides access to the image management functions. Press the MENU key once while in the Screen Snapshot V iew to access the Scr een Snapshot X - Press™ menu. NO TE: For more inf ormation, see Screen Snapshot V iew . Delete Image (optional-purchase M[...]

Navigation Menu T ab Press the MENU key twice to access the Main Menu System, then press the RIGHT cursor ke y to select the Navigation tab. NO TE: Menu choices will vary depending on system settings. Navigation Menu 81[...]

Current T r ack Current T rack allows you to view the Current T rack submenu. T o vie w the Current T r ack Submenu: 1. Highlight Current T rack on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the Curr ent T rack submenu. T he Curr ent T r ack Submenu contains the following menu choices: Save Curr ent T rack allo [...]

T he Sa v ed T r acks Submenu contains the f ollowing menu choices: Edit allows you to select a pre viously-sav ed track and edit its name, whether it is visible or not, and its appearance. Delete allows you to delete a track fr om a list of previously -saved tr acks. Default sets the appearance of the track created by selecting Sa ve Current T rac[...]

Routes Routes allows you to view the Routes submenu. T o vie w the Routes Submenu: 1. Highlight Routes on the Navigation main menu. 2. Use the RIGHT 4-WA Y Cursor Control keys to vie w the Routes submenu. T he Routes Submenu contains the f ollowing menu choices: Create allows y ou to create a new , empty route and add waypoints to it immediately . [...]

North Refer ence North Reference allows you to have bearings displayed with one of two orientations: T rue North or Magnetic North. T o change the North Ref er ence setting: 1. Highlight North Reference on the Na vigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to change the North Refer ence setting. (T rue, Magnetic, Defau[...]

T rack Min Distance (Advanced) T rack Min Distance allows you to set a minimum distance of tr avel befor e a trackpoint is added to the track. NO TE: T rack Min Distance w orks in conjunction with T r ackpoint Interval. Both conditions must be met befor e a trackpoint is added to the current tr ack. T o change the T r ack Minimum Distance setting: [...]

Course Pr ojection Line Course Projection Line allows you to display or hide an arr ow extending from the bow of the boat that projects y our current course, and sho ws where the boat will go if you continue on your present cour se. T o change the Course Project Line setting: 1. Highlight Course Projection Line on the Na vigation main menu. 2. Use [...]

Delete All Nav Data (Advanced) Delete All Nav Data allo ws you to delete all sav ed T racks, Waypoints and Routes. T his menu choice should be used with caution. T o Delete All Navigation Data: 1. Make sure you ar e in Advanced User Mode, then highlight Delete All Nav Data on the Na vigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key t[...]

Chart Menu T ab Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor ke y to select the Chart tab. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode. Chart Menu 89[...]

Chart Detail Lev el Chart Detail Level allo ws you to select how much chart detail y ou want displayed on the Navigation V iews. Basic shows land areas, ports, obstructions and restricted areas. Navigation shows nav aids, landmarks, ferrywa ys and navigation routes in addition to the Basic information. Underwater shows depth contours, fishing ar ea[...]

T o change the Lat/Lon Grid setting: 1. Highlight Lat/Lon Grid on the Chart main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to change the Lat/Lon Grid setting. (Hidden, V isible, Default = Hidden) Spot Soundings Spot Soundings allo ws you to display or hide spot soundings, which are depth measurements shown on the chart. NO TE: Spo[...]

Chart Select Chart Select allows y ou to choose what chart to use if you hav e built- in charts or a map card. If you select A uto, your unit will select a chart automatically . T o activ ate or de-activate Chart Select: 1. Highlight Chart Select on the Navigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to select which char[...]

Set Map Offset (Advanced) Set Map Offset allows y ou to change the map offset used by the 1100 Series™. NO TE: The Map Offset will be applied to all maps and not just the map that requires the correction. T he Map Offset should be cleared if a differ ent map is to be used. T o change the Map Offset setting: 1. Activate the cursor and mo ve it loc[...]

Alarms Menu T ab From an y view , pr ess the MENU key twice to access the Main Menu System. The Alarms tab will be the def ault selection. NO TE: When an alarm is triggered, you can silence it by pr essing any key . The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected. Alarms Menu 94[...]

Alarm V olume Alarm V olume allo ws you to adjust the volume of the alarms. T o change the Alarm V olume setting: 1. Highlight Alarm V olume on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WA Y Cur sor Control ke ys to change the Alarm V olume setting. (Off , 1 - 10, Default = 5) Low Battery Alarm Low Battery Alarm sounds when the input battery[...]

Off Course Alarm Off Course Alarm sounds when the boat has moved too far off course based on the menu setting when navigating. Off Course Alarm allows y ou to set how far the boat is allowed to mov e off course befor e the Off Course Alarm will sound. T o change the Off Course Alarm setting: 1. Highlight Off Course Alarm on the Alarms main menu. 2.[...]

Drift Alarm Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the siz e of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter , the Drift Alarm will sound. T o change the Drift Alarm setting: 1[...]

Setup Menu T ab From an y view , pr ess the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor ke y until the Setup tab is selected. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the control head. Setup Menu 98[...]

Sound V olume Sound V olume allo ws you to control the v olume of all sounds emitted by the control head (except for the v olume of the alarms, which is controlled by Alarm V olume). T o change the Sound V olume setting: 1. Highlight Sound V olume on the Setup main menu. 2. Use the LEFT or RIGHT 4-WA Y Cur sor Control keys to change the Sound V olu[...]

Units - Speed (with Speed input only) Units - Speed selects the units of measure f or speed-related readouts. T o change the Units - Speed setting: 1. Highlight Units - Speed on the Setup menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to change the Units - Speed setting. (kph [International models only] , mph, kts, Def ault = kph for In[...]

Restore Def aults Restore Defaults resets ALL menu settings to their factory defaults. Use this menu choice with caution! T o Restore Defaults: 1. Highlight Restore Defaults on the Setup menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to initiate r estoring defaults. 3. The Confirm dialog box will appear . T o reset the defaults, press the RIGHT[...]

Daylight Sa ving T ime (Advanced) Daylight Saving T ime adjusts the time display to account for local Daylight Saving T ime. Selecting On adds one hour to the time display adjusted for your local time z one. Selecting Off leaves the time displa y as adjusted for your local time zone. T his menu choice is a vailable only when in Advanced User Mode ([...]

Date F ormat (Advanced, International only) Date Format changes the date format used by the unit This menu choice is av ailable only when in Advanced User Mode (see Setup Menu T ab: User Mode. ) International models only . Date Format selects the format for the date display when T ime + Date is selected as a Digital Readout (see Na vigation X- Pres[...]

NMEA Output (Advanced) NMEA Output turns the NMEA output on or off . T his menu choice is available only when in Adv anced User Mode (see Setup Menu T ab: User Mode .) T he f ollowing NMEA sentences are output: DPT - Depth MTW - W ater T emperature GLL - Lat/Lon Position GGA - GPS Fix Data RMC - Recommended Minimum Specific GNSS Data VTG - Course O[...]

IP Address Setup IP Address Setup allows y ou to set up an Ethernet connection. Use this feature to open a window wher e a dynamic IP address can be selected (your contr ol head will find and update its own address) or a static IP address (wher e you set the address manually). T o use the IP Address Setup f eatur e: 1. Highlight IP Address Setup on[...]

V iews Menu T ab From an y view , pr ess the MENU key twice to access the tabbed Main Menu System, then press the RIGHT 4-W A Y Cur sor Control key until the V ie ws tab is selected. This menu tab allo ws you to set the available views to either hidden or visible in the vie w rotation. T he view will be remo ved from the view r otation if it is set[...]

Accessories Menu T ab From an y view , pr ess the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Accessories tab is selected. If no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the Accessories tab, only the Screen Snapshot menu choice. If an accessory is [...]

Using Screen Snapshot Screen Snapshot activates the screen snapshot function. W hen Screen Snapshot is enabled, pressing the MARK ke y creates a sav ed screen capture on the optional- purchase MMC/SD card installed in your unit’s car d slot. All menus, dialog boxes, warnings and messages are captured and sav ed automatically . Once you have cr ea[...]

T o vie w screen snapshots: 1. Make sure that the optional-purchase MMC/SD car d used to capture the screen is installed in your card slot. 2. Press the VIEW key until y ou see the Screen Snapshot V iew . 3. Y ou can scroll through the whole list of captures in this view using the 4-W A Y Cursor keys. Highlight a thumbnail (using the Up or Down 4-W[...]

T roubleshooting Before contacting the Humminbird® Customer Resour ce Center , please read the f ollowing section. T aking the time to review these tr oubleshooting guidelines may allow y ou to solve a performance problem yourself , and therefor e avoid sending y our unit back for repair . Chartplotter Doesn’t P ower Up If your Chartplotter does[...]

Display Pr oblems Ther e are sev eral main conditions or sources of possible interfer ence that may cause problems with the quality of the information displayed on the contr ol head. Look in the following table f or some symptoms of display problems and possible solutions: Finding the Cause of Noise Electrical noise usually affects the display with[...]

1- Y ear Limited W arranty W e warrant the original r etail purchaser that products made by Humminbir d® have been manuf actured free from defects in materials and w orkmanship. T his warranty is effectiv e for one year from the date of original retail purchase. Humminbird® pr oducts found to be defectiv e and covered b y this warranty will be re[...]

Humminbird® Service P olicy Even though you'll probably ne ver need to take adv antage of our incredible service policy , it's good to know that we back our products this confidently . We do it because y ou deserve the best. W e will make e very effort to repair your unit within thr ee business days from the r eceipt of your unit at our [...]

Returning Y our Unit for Service Before sending your unit in f or repair , please contact the factory , either by phone or by email, to obtain a Repair Authorization Number for y our unit. Please have your pr oduct model name and serial number available befor e calling the factory . If you contact the factory by e-mail, please include your pr oduct[...]

1100 Series™ Chartplotter Accessories Accessories customize the 1100 Series™ to your needs and enable you to sta y on the edge of new technology . When an accessory is connected to the 1100 Series™, additional menus and readouts are added automatically to the Main Menu System. Accessories available today that ar e supported by your 1100 Serie[...]

116 Specifications Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 V x 800 H; 10.4” Diagonal 4:3 Color TFT Unit Size (Gimbal Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.1”W x 9.3”H x 2.9”D Unit Size (In-Dash Mount) . . . . . . . . . . . . . . . . . . . . . . . . .[...]

117 Glossary Acquisition Time: The length of time that a GPS receiv er typically takes to determine a position from at least three satellites. Humminbird® GPS receiv ers pro vide very fast acquisition times (under one minute), permitting users to get out on the water faster . Alarm, Arrival: T he audible alert that sounds when the boat is equal to[...]

118 Glossary Estimated Position Err or (EPE): Estimated P osition Error is a calculation that indicates the potential position inaccuracy the user may experience due to a variety of GPS f actors which include satellite position in the sky , signal strength and others factors. Fix T ype: F ix T ype indicates whether the GPS receiver is providing 2D [...]

119 Glossary Present P osition: Present Position is the current location (latitude, longitude) determined b y GPS. T he Present P osition is indicated on-screen by a dir ectional boat icon if the boat is moving, or a round symbol if the boat is stationary . Route: A Route is series of waypoints linked together in a specific sequence to define a nav[...]

120 T rackplotter: T rackplotter describes a na vigation device that shows Pr esent Position, along with T rack, W aypoint, and Routes, but NO MAP in the background. See Chartplotter . T rolling Grid: T rolling Grid is a Humminbird® feature that displays a pr ecise refer ence grid around a waypoint. T his grid is used as a guide pattern for tr oll[...]

121 Contact Humminbird® Contact the Humminbird® Customer Resource Center in any of the follo wing wa ys: By T elephone (Monday - F riday 8:00 a.m. to 4:30 p.m. Central Standar d T ime): 1-800-633-1468 By e-mail (typically we respond to y our e-mail within three business da ys): cservice@johnsonoutdoors.com For dir ect shipping, our address is: Hu[...]