Husqvarna MZ6125BF / 968999721 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 77 pages
- 5.26 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Lawn Mower
Husqvarna LT135
64 pages 1.06 mb -
Lawn Mower
Husqvarna 968999204 / iZ4218KAA
24 pages 0.94 mb -
Lawn Mower
Husqvarna CTH200 TWIN
92 pages 3.12 mb -
Lawn Mower
Husqvarna 2354GXLS
46 pages 5.14 mb -
Lawn Mower
Husqvarna R153S
132 pages 8.99 mb -
Lawn Mower
Husqvarna 968999175 / ZTH7226KOA
24 pages 0.39 mb -
Lawn Mower
Husqvarna YTH 2448
48 pages 2.26 mb -
Lawn Mower
Husqvarna YTH18542
44 pages 1.78 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Husqvarna MZ6125BF / 968999721. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Husqvarna MZ6125BF / 968999721 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Husqvarna MZ6125BF / 968999721 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Husqvarna MZ6125BF / 968999721 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Husqvarna MZ6125BF / 968999721
- nom du fabricant et année de fabrication Husqvarna MZ6125BF / 968999721
- instructions d'utilisation, de réglage et d’entretien de l'équipement Husqvarna MZ6125BF / 968999721
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Husqvarna MZ6125BF / 968999721 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Husqvarna MZ6125BF / 968999721 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Husqvarna en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Husqvarna MZ6125BF / 968999721, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Husqvarna MZ6125BF / 968999721, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Husqvarna MZ6125BF / 968999721. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Operator's Manual MZ5225 / 968999717 MZ6125 / 968999718 MZ7227 / 968999719 MZ5225BF / 968999720 MZ6125BF / 968999721 MZ5225C / 968999748 MZ6125C / 968999749 MZ25 / 968999780 Please read the operator ’s manual carefully and make sure you understand the instructions before using the machine. English[...]
-
Page 2
©2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A.[...]
-
Page 3
CONTENTS INTRODUCTION ............................................................... 5 General ....................................................................... 5 Driving and T ransport on Public Roads ...................... 5 T owing......................................................................... 5 Operating .......................[...]
-
Page 4
W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower . Each person operating the mower must be of sound mind and body and must not be under the in[...]
-
Page 5
English -5 INTRODUCTION Congratulations Thank you for purchasing a Husqvarna ride-on mower . This machine is built for superior efciency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance. This manual [...]
-
Page 6
English -6 INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer . See the cert[...]
-
Page 7
English -7 SYMBOLS AND DECALS These symbols are found on the machine and in the operator ’s manual. Study them carefully so that you know what they mean. Used in this publication to notify the reader of a risk of personal injury or death , particularly if the reader should neglect to follow instructions given in the manual. Used in this publicati[...]
-
Page 8
English -8 SYMBOLS AND DECALS Read Shut off engine and Keep a safe Use on slopes No passengers Operator ’s remove key before distance from no greater Manual performing any the machine than 10° maintenance or repair work Whole body Severing of ngers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for o[...]
-
Page 9
English -9 SAFETY Safety Instructions These instructions are for your safety . Read them carefully . IMPORT ANT : THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROWING OBJECTS. F AILURE TO OBSER VE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH. General Operation Read, understand, and follow all i[...]
-
Page 10
English -10 SAFETY W ARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer , birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces. 801 1-520 Never take passengers O[...]
-
Page 11
English -1 1 SAFETY W ARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. Personal Safety Equipme[...]
-
Page 12
English -12 SAFETY 801 1-509 Be extra cautious when driving on slopes 801 1-517 Never allow children to operate the machine 801 1-518 Keep children away from work area Do not use on steep slopes. • Do not try to stabilize the machine by putting • your foot on the ground. Do not mow near drop-offs, ditches, or • embankments. The machine could [...]
-
Page 13
English -13 SAFETY Safe Handling of Gasoline T o avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely ammable and the vapors are explosive. Extinguish all cigarettes, cigars, pipes, and • other sources of ignition. Use only approved gasoline container . • Never remove gas cap or add fuel with[...]
-
Page 14
English -14 SAFETY 801 1-515 Never drive the machine in an enclosed space W ARNING! The battery contains lead and lead compounds, chemicals that are considered to cause cancer , birth defects, and other reproductive system damage. W ash your hands after handling the battery . Use protective glasses for maintenance work. General Maintenance Never op[...]
-
Page 15
English -15 SAFETY Ensure that nuts and bolts, especially the • fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. Do not modify safety equipment. Check • regularly to be sure it works properly . The machine must not be driven with defective or unmounted protective plates, pro[...]
-
Page 16
English -16 SAFETY W ARNING! Escaping hydraulic oil under pressure can have sufcient force to penetrate the skin, causing serious injury . If injured by escaping uid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately . 801 1-514 Regularly clean deck IMPORT ANT INFORMA T[...]
-
Page 17
English -17 SAFETY Roll over Protection system (ROPS) The ROPS increases the basic weight of the unit by 42 lbs/19 kg. The ROPS is an accessory . Do not use ROPS as a lifting, attaching or • anchoring point. Do not use ROPS for wrecking or towing. • Do not exceed Max GVW: 2822 lbs/1283 kg. • Read machine operator´s manual before • each use[...]
-
Page 18
CONTROLS English -18 This operator ’s manual describes the Husqvarna Zero T urn Rider . The rider is tted with a Kohler four- stroke overhead valve engine developing 25-27 horse power*. Control Locations Motion control levers 1. Parking brake 2. Throttle control 3. Blade switch 4. Ignition switch 5. Choke control 6. Fuses 7. 1 2 3 4 5 6 8 9 10[...]
-
Page 19
CONTROLS English -19 801 1-789 Steering controls W ARNING! The machine can turn very rapidly if one steering control is moved much further forward than the other . 1. Steering Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a n[...]
-
Page 20
CONTROLS English -20 2. Parking Brake 8061-010 Parking brake not activated IMPORT ANT INFORMA TION The machine must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower . 4. Blade Switch In order to engage the mower deck, pull the knob out; the mow[...]
-
Page 21
CONTROLS English -21 5. Ignition Switch The ignition key is placed on the control panel and is used to start and stop the engine. 7. Fuses Fuses are located on the left hand side of the machine. They are accessed by tilting the seat forward. They are at pin fuses of the same type used in automobiles. There are two fuses with ratings and function[...]
-
Page 22
CONTROLS English -22 8. Fuel T ank Read the safety instructions before refueling. The machine has one fuel tank, just behind the seat. The tank capacity is 5.7 gallons (22 liters). Make sure the fuel cap is properly tightened and the cap gasket is not damaged. The engine will run on a minimum of 85-octane unleaded gasoline (no oil mix). Environment[...]
-
Page 23
CONTROLS English -23 9. Fuel Shut Off V alve The fuel shut off valve is located at the left rear of the seat. The valve is of f when the handle tab is turned perpendicular to the fuel line. 801 1-419 Fuel shut off valve in the CLOSED position. 8061-007 1. Detent Pin 2. T ransport latch 3. Foot Pedal The mower deck’s lifting lever 10. Lifting Leve[...]
-
Page 24
CONTROLS English -24 1 1. Seat Adjustment Lever The seat can be adjusted lengthways. When making adjustments, the lever under the front edge of the seat is moved to the left (as seen by the driver in the seat), after which the seat can be moved backward or forward. 801 1-441 Lengthways adjustment 12. Hour Meter The hour meter displays the total ope[...]
-
Page 25
English -25 OPERA TION Read “Safety Instructions” section and following pages, if you are unfamiliar with the machine. T raining Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities. We suggest that this section be reviewed in its entirety prior to attempting to move the mower under its[...]
-
Page 26
English -26 OPERA TION Before Starting Read the sections Safety Instructions and • Controls before starting the machine. Perform the daily maintenance before • starting (see Maintenance Schedule in the Maintenance section). Check that there is sufcient fuel in the fuel • tank. Adjust the seat to the desired position. • The following cond[...]
-
Page 27
English -27 OPERA TION Disengage the mower blades by pressing the blade switch downwards. Move the steering controls outward to the locked (outer) neutral position. Move the throttle to the middle position. 8061-002 Press the control for disengaging the mower deck 8061-001 Set the throttle 8061-012b Place controls in neutral position[...]
-
Page 28
English -28 OPERA TION If the engine is cold, the choke control should be pulled out to its extent. 8061-004 Set the choke control Open the fuel valve. 801 1-438 Fuel valve in the OPEN position Press in and turn the ignition key to the start position 8061-01 1 T urn to ST ART position[...]
-
Page 29
English -29 OPERA TION When the engine starts, immediately release the ignition key back to the run position. 8061-001 Release ignition to the RUN position Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it to heavily . USE FULL THROTTLE WHEN MOWING (no [...]
-
Page 30
English -30 OPERA TION 801 1-642 Jumper cable connection W ARNING! Lead-acid batteries generate explosive gases. Keep sparks, ame and smoking materials away from batteries. Always wear eye protection when around batteries. IMPORT ANT INFORMA TION Y our mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12[...]
-
Page 31
English -31 OPERA TION Running Release the parking brake by moving the 1. lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without rst setting the parking brake will shut off the engine. Move the steering controls to the neutral 2. position (N)[...]
-
Page 32
English -32 OPERA TION the right wheel is reduced and the machine turns to the right. T urning on the spot (zero turn) can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. Operating on hills Read the Safety Instructions “Driving on Slopes”[...]
-
Page 33
English -33 OPERA TION W ARNING! Clear the lawn of stones and other objects that can be thrown out by the blades. W ARNING! Never drive the rider on terrain that slopes more than 10 degrees. Mow slopes up and down, never side to side. A void sudden directional changes. Mowing pattern 801 1-603 Mowing Tips Observe and ag rocks and other xed ?[...]
-
Page 34
English -34 OPERA TION Stopping the Engine Allow the engine to idle a minute in order to attain normal operating temperature before stopping it, if it has been worked hard. Avoid idling the engine for longer periods, as there is a risk of the spark plugs fouling. Disengage the mower deck by depressing • the blade switch. 8061-013 Disengage the mo[...]
-
Page 35
English -35 OPERA TION English - 35 Pump release valves IMPORT ANT INFORMA TION Tighten the valve moderately . Do not overtighten the valve when closing. That can damage the valve seat. 801 1-507 Pump release valve Pump release valves are located at the front and rear of the pump. They are used to release the system so the machine may be moved by h[...]
-
Page 36
English -36 MAINTENANCE Maintenance Schedule The following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is recommended to maintain your machine in the best possible condit[...]
-
Page 37
English -37 MAINTENANCE Maintenance Before After Daily W eekly At least once each year Maintenance interval in hours 25 50 100 300 Check/adjust throttle and choke cables Check the condition of belts, belt pulleys Change the engine oil 1) Replace the engine oil lter Clean/replace the spark plugs Replace the fuel lter Replace the air lter (p[...]
-
Page 38
English -38 MAINTENANCE Battery Y our mower is equipped with a maintenance free battery and does not need servicing. However , periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • Recharge at 6-10 amperes for 1 hour T o clean b[...]
-
Page 39
English -39 MAINTENANCE Ignition System The engine is equipped with an electronic ignition system. Only the spark plugs require maintenance. For recommended spark plugs, see T echnical Data. 1. Remove the ignition cable boot and clean around the spark plug. 2. Remove the spark plug with a spark plug socket wrench. 3. Check the spark plug. Replace t[...]
-
Page 40
English -40 MAINTENANCE Engine Cooling Air Intake Check that the engine’s cooling air intake is free from leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage. The cooling air intakes rotates when the engine is running. Mind your ngers. Throttle Cable Check that the engine [...]
-
Page 41
English -41 MAINTENANCE Replacing Air Filter The engine is equipped with a replaceable, high density paper air cleaner element and an oiled, foam precleaner which surrounds the paper element. Check the air cleaner daily or before starting the engine. Check for a buildup of dirt and debris around the air cleaner system. Keep this area clean. Also ch[...]
-
Page 42
English -42 MAINTENANCE Replacing the Fuel Filter Replace the line-mounted fuel lter every 100 hours (once per season) or more regularly if it is clogged. Replace the lter as follows: 1. Move the hose clamps away from the lter . Use at-nosed pliers. 2. Pull the lter loose from the hose ends. 3. Push the new lter into the hose ends[...]
-
Page 43
English -43 MAINTENANCE Parking Brake Visually check that no damage is found on the lever , links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufcient braking action. T o adjust the parking brake, contact the Husqvarna service workshop. W ARNING! Faulty adjustment result in reduced braking ability[...]
-
Page 44
English -44 MAINTENANCE 801 1-622 Slackening the belt tensioner 801 1-580 Belt routing, deck belt 1 2 3 4 5 6 7 Deck belt Deck belt removal Park on a level surface. Apply park brake.Lower the deck into the lowest cutting position. Remove foot plate and belt shields. 1. Using a ratchet with a 9/16” socket on the 2. spring idler bolt to relieve the[...]
-
Page 45
English -45 MAINTENANCE Cutting Blades In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged. W ARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. Bent or cracked blades or blades with large nicks should be replaced. Damaged blades sho[...]
-
Page 46
English -46 MAINTENANCE Blade replacement W ARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. • Remove blade bolt by turning counterclockwise. IMPORT ANT INFORMA TION T o ensure proper assembly , center hole in blade must align with star on cutter housing. • Install new or re-sha[...]
-
Page 47
English -47 MAINTENANCE Adjusting the Mower Deck W ARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. W ARNING! Before performing any service or adjustment checklist: 1. Engage the parking brake. 2. Place the Blade switch in the disengaged position. 3. T urn ignition switch to “OFF” pos[...]
-
Page 48
English -48 MAINTENANCE Anti-scalp rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti-scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. IMPORT ANT INFORMA TION Adjust a[...]
-
Page 49
English -49 MAINTENANCE Cleaning and W ashing Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower[...]
-
Page 50
LUBRICA TION English -50 * 1 2 3 4 5 5 General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be lled with engine oil. When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease. For daily use, the machine should be lubricated twic[...]
-
Page 51
LUBRICA TION English -51 Lubricating the Cables If possible, grease both ends of the cables and move the controls to end stop positions when lubricating. Ret the rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly . If a cable binds, it can disrupt operation. If a cable binds, remove [...]
-
Page 52
LUBRICA TION English -52 5. Changing the Engine Oil The engine oil should be changed for the rst time after 5-8 hours of operation. Thereafter , it should be changed every 50 hours. The oil drain valve is located at the rear of the unit, to the right of the oil lter . Place the machine on a at surface. • Place a container under the engin[...]
-
Page 53
LUBRICA TION English -53 Engine Oil Levels Check the oil level in the engine when the machine is standing level and the engine is stopped. Remove the dipstick, wipe it clean, and then replace it. Rotate dipstick counterclockwise until the cap drops down to the bottom of the threads. T ake the dipstick out again and read the oil level. The oil level[...]
-
Page 54
LUBRICA TION English -54 Hydraulic Pump Fluid Change This transaxle is designed with an external lter for ease of maintenance. T o ensure constant uid quality levels and longer life an oil lter change interval of every 200 hours is recommended. The following procedure can be performed with the pump installed in the vehicle, and the vehicle[...]
-
Page 55
TROUBLESHOOTING English -55 Problem Cause The engine will not start. • Blade switch is engaged. • Steering controls are not locked in the neutral position. • Driver is not sitting in the driver ’s seat. • Parking brake is not activated. • Battery is dead. • Contamination in the carburetor or fuel line. • Fuel supply is closed or the[...]
-
Page 56
TROUBLESHOOTING English -56 The engine overheats. Battery not charging. • Poor contact with battery terminal cable connectors. • Charging lead is disconnected. The machine moves slowly , unevenly , or not at all. • Parking brake on. • Bypass valve on pump open. • Drive belt for the transmission slack or has come off. • Air trapped in hy[...]
-
Page 57
ST ORAGE English -57 Storage Winter Storage At the end of the mowing season, the machine should be readied for storage (or if it will not be in use for longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function. Fuel stabilizers are an acc[...]
-
Page 58
SCHEMA TICS English -58 20 AMP ELECTRIC CLUTCH ACCESSORY OUTLE T ENGINE GROUND WH T GRN WH T BL K RED/BL K RED/BL K YEL YEL BR N GRY BR N GRN GRN BR N YEL/RED BR N RIGHT MOTION CONTROL LEVER LEFT MOTION CONTROL LEVER BRAKE SWITCH SEAT SW . 1. SEAT UNOCCUPIED 2. BRAKE SWITCH IN OFF POSITION 3. MOTION CONTROL LEVERS OUT 4. PTO IN OFF POSITION SOLENOI[...]
-
Page 59
TECHNICAL DA T A English -59 MZ5225 / 968999717 MZ5225BF / 968999720 MZ5225C / 968999748 Kohler Courage Pro 25 hp* Pressure with oil lter 1.6 qt / 1.7 liter 1.7 qt / 1.9 liter 10W30, 5W30 SG, SH, SJ Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%) 5.2 gallons / 19.7 liters Champion RCY12YC .030" / 0.75 mm Air cooled Standard 12V Elect[...]
-
Page 60
TECHNICAL DA T A English -60 MZ5225 / 968999717 MZ5225BF / 968999720 MZ5225C / 968999748 52" / 132cm 1.5 - 4.5" / 3.8 - 1 1.4 cm 0 3 18" / 457 mm Y es Standard Y es Standard Electromagnetic clutch 1 1 gauge fabricated 4.2 acres /h 16997 m 2 /h 760 lbs / 345 kg 76" / 193 cm 42" / 107 cm 49" / 125 cm 54" / 137 cm 67[...]
-
Page 61
TECHNICAL DA T A English -61 MZ7227 / 968999719 Kohler Courage Pro 27 hp* Pressure with oil lter 1.6 qt / 1.7 liter 1.7 qt / 1.9 liter 10W30, 5W30 SG, SH, SJ Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%) 5.2 gallons / 19.7 liters Champion RCY12YC .030" / 0.75 mm Air cooled Standard 12V Electric Hydrostatic pump Dual levers, foam gr[...]
-
Page 62
TECHNICAL DA T A English -62 MZ7227 / 968999719 72" / 183cm 1.5 - 4.5" / 3.8 - 1 1.4 cm 0 3 25" / 635 mm No Standard Y es Standard Electromagnetic clutch 1 1 gauge fabricated 4.9 acres /h 23472 m 2 /h 797 lbs / 362 kg 78" / 201 cm 42" / 107 cm 49" / 125 cm 73" / 187 cm 87" / 221 cm MZ25 / 968999780 N/A N/A N/[...]
-
Page 63
TECHNICAL DA T A English -63 Accessories Collection system T orque Specications Engine crankshaft bolt 50 ft/lb (67 Nm) • Deck pulley bolts 45 ft/lb (61 Nm) • Lug nuts 75 ft/lb (100 Nm) • Blade bolt 45-55 ft/lb (60-75 Nm) • Standard ¼" fasteners 9 ft/lb (12 Nm) • Standard • 5 / 16 " fasteners 18 ft/lb (25 Nm) Standard • [...]
-
Page 64
TECHNICAL DA T A English -64 TORQUE SPECIFICA TIONS HEX HEAD CAP SCREWS The torque values shown should be used as a general guideline when specic torque values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut ft./lbs Nm ft./lbs Nm ft./lbs Nm ft./lbs ¼ 9 12 13 18 5 / 16 18 24 28 38 24 33 3 / 8[...]
-
Page 65
English -65 CONFORMITY CERTIFICA TES USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulll the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.). Do not remove any of these labels. Certicates can also be supplied[...]
-
Page 66
English -66 SER VICE JOURNAL English -66 Action Date, mtr reading, stamp, sign Delivery Service 1. Charge battery . 2. Adjust tire pressure of all wheels according to T echnical Data. 3. Mount the steering controls in the normal position. 4. Connect the contact box to the cable for the seat’s safety switch. 5. Check that the right amount of oil i[...]
-
Page 67
English -67 SER VICE JOURNAL English -67 Action Date, mtr reading, stamp, sign After the First 5-8 Hours 1. Change engine oil.[...]
-
Page 68
English -68 SER VICE JOURNAL English -68 Action Date, mtr reading, stamp, sign 25-Hour Service 1. Check the engine air lter . 2. Sharpen/Replace mower blades if required. 3. Check the tire pressures. 4. Check battery with cables. 5. Lubricate according to lubrication chart. 6. Check/clean the engine’s cooling air intake. 7. Clean the air clean[...]
-
Page 69
English -69 SER VICE JOURNAL English -69 Action Date, mtr reading, stamp, sign 50-Hour Service 1. Perform the 25-hour service. 2. Clean/replace the air cleaner ’s lter cartridge (paper lter) (shorter intervals for dusty operating conditions). 3. Change engine oil. 4. Lubricate according to lubrication chart. 5. Check/adjust the parking brak[...]
-
Page 70
English -70 SER VICE JOURNAL English -70 Action Date, mtr reading, stamp, sign 100-Hour Service 1. Perform the 25-hour service. 2. Perform the 50-hour service. 3. Change the engine oil lter . 4. Clean/replace the spark plugs. 5. Replace the fuel lter . 6. Clean the cooling ns on the engine and transmission. 7. Check V -belts. 8. Check tigh[...]
-
Page 71
English -71 SER VICE JOURNAL English -71 Action Date, mtr reading, stamp, sign 300-Hour Service 1. Perform the 25-hour service. 2. Perform the 50-hour service. 3. Perform the 100-hour service. 4. Check/adjust the mower deck. 5. Clean the combustion chamber and grind the valve seats. 6. Check the engine valve clearance. 7. Replace the air cleaner ?[...]
-
Page 72
English -72 SER VICE JOURNAL English -72 Action Date, mtr reading, stamp, sign At Least Once Each Y ear 1. Clean the engine’s cooling air intake (25 hours). 2. Replace the air cleaner ’s pre-lter (foam) (300 hours). 3. Replace the air lter ’s paper cartridge. 4. Change the engine oil (50 hours). 5. Replace the engine oil lter (100 ho[...]
-
Page 73
English -73 SER VICE JOURNAL English -73 Action Date, mtr reading, stamp, sign[...]
-
Page 74
English -74 SER VICE JOURNAL English -74 Action Date, mtr reading, stamp, sign[...]
-
Page 75
[...]
-
Page 76
SEC TION 1: LIMIT ED W ARR ANTY Husq varna Fo rest & Garde n Company (“H usqvarn a”) warra nts Husq varna pro duct to the or iginal pu rchaser to be fr ee from defe cts in mate rial and wor kmansh ip from the date of pur chase for the “W arran ty Period ” of the prod uct as set for th below: Life time W arrant y (Parts and La bor): All [...]
-
Page 77
P/N 539 132401 R01 03/27/08[...]