IBM DS8000 manuel d'utilisation

IB M T o ta lSt o ra ge DS8000 M e ssage s Referen c e GC26-7659-04 [...]

[...]

IB M T o talS to r ag e DS8000 M e ssage s Referen c e GC26-7659-04 [...]

Note: Before using this information and the product it supports, read the information in the Safety and environmental notices and Notices sections. This edition replaces GC26-7659-03 and all previous editions of GC26-7659. © Copyright International Business Machines Corporation 2004, 2005. All rights reserved. US Government Users Restricted Rights[...]

About messages Message types and organization. Three types of messages are issued to you from the user interfaces and supporting software: v Informational messages are identified by the letter “I” at the end of the message identifier . They provide information about activities as they take place. For instance, an informational message might rep[...]

iv IBM T otalStorage DS8000: Messages Reference[...]

Safety and environmental notices This section contains information about safety notices that are used in this guide and environmental notices for this product. Safety notices Use this process to find information about safety notices. To find the translated text for a danger or caution notice: 1. Look for the identification number at the end of each[...]

boldface T ext in boldface represents menu items and lowercase or mixed-case command names. italics T ext in italics is used to emphasize a word. In command syntax, it is used for variables for which you supply actual values. monospace T ext in monospace identifies the data or commands that you type, samples of command output, or examples of progra[...]

Title Description Order Number IBM T otalStorage Multipath Subsystem Device Driver User’s Guide This publication describes how to use the IBM Subsystem Device Driver (SDD) on open-systems hosts to enhance performance and availability on the DS8000. SDD creates redundant paths for shared logical unit numbers. SDD permits applications to run withou[...]

Title Description Order Number IBM T otalStorage ESS Implementing Copy Services in an Open Environment This publication, from the IBM International T echnical Support Organization, tells you how to install, customize, and configure Copy Services on UNIX, Windows NT ® , Windows 2000, Sun Solaris, HP-UX, T ru64, OpenVMS, and iSeries host systems. Th[...]

Title Description Order Number IBM T otalStorage ESS Implementing Copy Services in an Open Environment This publication, from the IBM International T echnical Support Organization, tells you how to install, customize, and configure Copy Services on UNIX or Windows 2000 host systems. The Copy Services functions that are described include peer-to-pee[...]

Title Description Order Number IOCP User’s Guide, IBM e(logo)server zSeries This publication describes the Input/Output Configuration Program that supports the zSeries server . This publication is available in PDF format by accessing ResourceLink at the following Web site: www .ibm.com/servers/resourcelink/ SB10-7037 S/390: Input/Output Configura[...]

Title Description Order Number IBM OS/390 Hardware Configuration Definition User’s Guide This guide explains how to use the Hardware Configuration Data application to perform the following tasks: v Define new hardware configurations v View and modify existing hardware configurations v Activate configurations v Query supported hardware v Maintain [...]

Title Description Order Number Device Support Facilities: User’s Guide and Reference This publication describes the IBM Device Support Facilities (ICKDSF) product used with IBM direct access storage device (DASD) subsystems. ICKDSF is a program that you can use to perform functions that are needed for the installation, the use, and the maintenanc[...]

T ype of Storage Information We b Site Copy Services command-line interface (CLI) http://www-1.ibm.com/servers/storage/support/software/cscli.html DS8000 series publications http://www-1.ibm.com/servers/storage/support/disk/ds8100/index.html Click Documentation . FlashCopy for S/390 and zSeries host systems http://www .storage.ibm.com/software/sms/[...]

Department 61C 9032 South Rita Road TUCSON AZ 85775-4401 xiv IBM T otalStorage DS8000: Messages Reference[...]

Summary of Changes for GC26-7659-04 IBM T otalStorage DS8000 This document contains terminology , maintenance, and editorial changes. T echnical changes or additions to the text and illustrations are indicated by a vertical line to the left of the change. This summary of changes describes new functions that have been added to this release. New Info[...]

T able 5. DS Storage Manager messages v CMUR00001W v CMUR00002W v CMUR00003W v CMUS00030W T able 6. Storage management console server messages v CMUN02137E v CMUN02149E v CMUN02208E v CMUN02337E v CMUN02387E v CMUN03030E v CMUN03032E v CMUN03038E v CMUN03048E v CMUN03051E v CMUN03052E v CMUN03065E v CMUN03066E v CMUN03067E v CMUN03070E v CMUN03078E[...]

T able 7. Moved messages (continued) Original message identifer New message identifier CMUN01022E CMUN02425E CMUN01023E CMUN02426E CMUS00030E CMUS00030W Summary of Changes for GC26-7659-04 IBM T otalStorage DS8000 xvii[...]

xviii IBM T otalStorage DS8000: Messages Reference[...]

Chapter 1. Framework messages Framework messages These messages are issued by the user interface framework. CMMCI9001E Command command_name resulted in an internal server error (error number return_code ). View the log file for details. Explanation An unexpected value was returned for this command. Action Run the command again. If the problem persi[...]

CMMCI9005I There is nothing to modify. Explanation Yo u are attempting to modify the attributes for an object, but the values that you specified are already defined for that object. Action If you must modify the attributes for an object, run the command again. Ensure that you are specifying different attribute values. CMMCI9006E No class_type insta[...]

Action Make sure that you are running only supported commands. CMMCI9010E The command did not complete successfully. Explanation The command did not complete successfully . Action V erify that you are using the correct syntax. Then run the command again. CMMCI9013E Command: command_name was not found. Explanation Yo u attempted to run a command tha[...]

Action Run the command again using correct parameters. Enter ″ help command_name ″ for a list of valid parameters. CMMCI9017E Parameter parameter_name is already specified. Explanation Yo u are attempting to specify the same parameter twice on a single command. Action Run the command again, specifying the parameter only once. Enter ″ help com[...]

Action Run the command again, specifying all required parameters. Enter ″ help command_name ″ for a list of valid parameters and values. CMMCI9023E parameter_name is mutually exclusive of parameter_name Explanation Yo u specified two parameters that cannot be used together . Yo u cannot specify both parameters on a single command. Action Run th[...]

CMMCI9027E Invalid value for parameter_name . The length exceeds maximum_length characters. Explanation The length of the value that you specified for this parameter exceeds the maximum length for this value. Action Run the command again, making sure that the length of the value that you specify for this parameter is not greater than the maximum le[...]

CMMCI9031E The help page for command command_name does not exist. Explanation Yo u requested help for the command command_name , but no help exists for this command. Action Make sure that you are requesting help for a valid command. Enter ″ help ″ for a list of available commands. CMMCI9032E You must specify parameter parameter_name if you spec[...]

Action Make sure that this is the object that you are trying to create. If so, no action is required. If not, run the command again using a new object name. CMMCI9036E The value value for parameter - parameter_name is already specified. Explanation Yo u are attempting to specify the same parameter twice in a single command. Action Run the command a[...]

CMMCI9040E The value value for the parameter parameter_name is not valid. It contains unsupported characters. Explanation Yo u specified an object name that contains unsupported characters. Action Run the command again, making sure that you specify a valid object name. Enter ″ help command_name ″ for a list of valid parameters and parameter val[...]

CMMCI9044E Entry entry_value exceeds the length limit ( entry_limit ) for one item for the - parameter_name parameter. Explanation The length of the value that you specified for this parameter is too long. Action Run the command again, making sure that you specify valid values for all parameters. Enter ″ help command_name ″ for a list of valid [...]

CMMCI9048E The date provided: date_value is invalid. Tip: Correct format for the date field is YYYY-MM-DD Explanation The value that you entered for the date specifier is invalid. Action The format of the date field is YYYY -MM-DD. Check that the value that you entered follows this format and is a valid date. CMMCI9049E You must specify one flag fr[...]

Action Enter a password, and then resubmit the task. CMUF00002E You must enter a user name and a password. Explanation Yo u must enter a user name and a password to log into the DS Storage Manager . Action Enter a user name and a password, and then resubmit the task. CMUF00003E An unexpected error has occurred. Explanation An unexpected runtime err[...]

Chapter 2. DS command-line interface messages DS CLI messages These messages are issued by the DS command-line interface. CMUC00000I COMMAND_INFO Extent pool VALUE_0 successfully created. Explanation The extent pool has been created successfully . Action None. CMUC00001I COMMAND_INFO Extent pool VALUE_0 successfully modified. Explanation The extent[...]

Action None. CMUC00005W COMMAND_INFO Are you sure you want to delete array ARRAY_ID ? [y/n]: Explanation Yo u are being asked to confirm that you want to delete the array . Action Enter Y to delete the array . Enter N to cancel the operation. CMUC00006I COMMAND_INFO Array VALUE_0 successfully deleted. Explanation The array has been deleted successf[...]

CMUC00010I COMMAND_INFO Rank VALUE_0 successfully deleted. NOTE: The rank might still be visible to queries until reformatting completes. Explanation The rank has been deleted successfully . However , device reformatting can take up to several hours to complete, depending on the size of the devices. The rank might still be visible in queries until [...]

Action Enter Y to delete the host connection. Enter N to cancel the operation. CMUC00015I COMMAND_INFO Host connection VALUE_0 successfully deleted. Explanation The host connection has been deleted successfully . Action None. CMUC00016I COMMAND_INFO Port group number PORT_GROUP successfully modified. Explanation The port group has been modified suc[...]

Action Enter Y to delete the logical control unit. Enter N to cancel the operation. CMUC00020I COMMAND_INFO LCU VALUE_0 successfully deleted. Explanation The logical control unit has been deleted successfully . Action None. CMUC00021I COMMAND_INFO CKD Volume VALUE_0 successfully created. Explanation The count-key-data volume has been created succes[...]

CMUC00025I COMMAND_INFO FB volume VALUE_0 successfully created. Explanation The fixed block volume has been created successfully . Action None. CMUC00026I COMMAND_INFO FB volume VALUE_0 successfully modified. Explanation The fixed block volume has been modified successfully . Action None. CMUC00027W COMMAND_INFO Are you sure you want to delete FB v[...]

CMUC00030I COMMAND_INFO Volume group VALUE_0 successfully created. Explanation The volume group has been created successfully . Action None. CMUC00031I COMMAND_INFO Volume group VALUE_0 successfully modified. Explanation The volume group has been modified successfully . Action None. CMUC00032W COMMAND_INFO Are you sure you want to delete volume gro[...]

CMUC00035I COMMAND_INFO Pinned tracks START to END on volume VOLUME_ID successfully deleted. Explanation The pinned track data on the volume has been deleted successfully . Action None. CMUC00036W COMMAND_INFO Are you sure you want to reset the access state for volume VOLUME_ID ? [y/n]: Explanation Yo u are being asked to confirm that you want to r[...]

CMUC00039I COMMAND_INFO No FlashCopy or Remote Mirror and Copy relationships exist for volume VOLUME_ID . The volume is clear. Explanation No Copy Services relationships can be found for this volume. No action can be taken because the volume is already clear . Action None. CMUC00040I COMMAND_INFO Storage complex VALUE_0 successfully modified. Expla[...]

CMUC00044E COMMAND_INFO Unknown error returned by management console server. Explanation The management console server reports a failure for unknown reasons. Action V erify that the correct versions of the management console server software and the command-line interface are installed. If the problem persists, contact IBM technical support for assi[...]

CMUC00048E COMMAND_INFO Array site VALUE_0 does not exist. Explanation Yo u are attempting to list, show , or create an array , but the array site that is specified as a command parameter cannot be found. Action Correctly specify the array site, or resubmit the command with another array site ID. T ip: Enter ″ help command_name ″ for more infor[...]

Action Specify a valid storage image, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00053E COMMAND_INFO I/O port VALUE_0 does not exist. Explanation The I/O port that is specified as a command parameter cannot be found. Action Specify the correct I/O port ID, and then resubmit the command. T ip: Ente[...]

CMUC00057E COMMAND_INFO Volume group VALUE_0 does not exist. Explanation The volume group ID that is specified as a command parameter cannot be found. Action Specify the correct volume group ID, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00058E COMMAND_INFO Volume VALUE_0 does not exist. Explanati[...]

Action Specify the correct CEC enclosure, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00062E COMMAND_INFO Storage management console enclosure VALUE_0 does not exist. Explanation The management console enclosure that is specified as a command parameter cannot be found. Action Specify the correct ma[...]

Action Specify the correct frame enclosure, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00066E COMMAND_INFO Storage enclosure VALUE_0 does not exist. Explanation The storage enclosure that is specified as a command parameter cannot be found. Action Specify the correct storage enclosure, and then re[...]

CMUC00070E COMMAND_INFO Inconsistent storage image ID VALUE_0 . Explanation Tw o or more different storage image IDs are specified in a single command. Action Specify only one storage image ID, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00071E COMMAND_INFO Invalid ID VALUE_0 . Explanation The form[...]

Action Specify the rank ID in the correct format, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00075E COMMAND_INFO Invalid extent pool ID VALUE_0 . Explanation The format of the extent pool ID is incorrect. Action Specify the extent pool ID in the correct format, and then resubmit the command. T ip:[...]

CMUC00079E COMMAND_INFO Invalid LSS VALUE_0 . Explanation The format of the specified logical subsystem is incorrect. Action Specify the logical subsystem in the correct format, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00080E COMMAND_INFO Invalid storage unit ID VALUE_0 . Explanation The format [...]

CMUC00083E COMMAND_INFO Invalid volume VALUE_0 . Explanation The format of the specified volume ID is incorrect. Action Specify the volume in the correct format, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00084E COMMAND_INFO The specified parameter VALUE_0 is out of range. Explanation The specifie[...]

CMUC00087E COMMAND_INFO The specified LCU VALUE_0 is invalid. Explanation The specified logical control unit is invalid. Action Specify a valid, existing logical control unit, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00088E COMMAND_INFO The specified LCU VALUE_0 already exists. Explanation The s[...]

Action Specify the subsystem ID in the proper format, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00092E COMMAND_INFO The specified volume ID VALUE_0 already exists. Explanation The specified volume exists. Action Use a volume ID not currently in use, and then resubmit the command. CMUC00093E COMMA[...]

Action Specify a storage image ID, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00096E COMMAND_INFO No remote storage image ID is specified. Explanation The command requires a remote storage image ID as a parameter . No remote storage image ID is specified. Action Include a remote storage image ID, [...]

Action Specify a pair of subsystem IDs, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00100E COMMAND_INFO A pair of subsystem IDs VALUE_0 is specified. A single subsystem ID is required for this command. Explanation The command requires a single subsystem ID as a parameter . Action Specify a single s[...]

CMUC00103E COMMAND_INFO When specifying the -range parameter, the starting and ending volume IDs must be on the same storage image. Explanation The -range parameter initiates a query that displays volume relationships that exist for source or target volumes within the specified volume ID range. The range is meaningless unless it is specified for vo[...]

T ip: Enter ″ help command_name ″ for more information. CMUC00107E COMMAND_INFO The parameter value VALUE_0 is smaller than the minimum allowable value: VALUE_1 . Explanation The parameter that has been supplied is smaller than the minimum value that is allowed. Action Specify a value equal to or higher than the minimum value that is allowed, a[...]

CMUC001 10E COMMAND_INFO No matching candidate connection found. Explanation The candidate Remote Mirror and Copy path between source and target ports cannot be established because one or both of the physical connections cannot be found. Action Specify existing source and target ports, and then resubmit the command. T ip: Enter ″ help command_nam[...]

Action Specify a user name that is not currently in use, and then resubmit the command. If you want to change the record specified, issue the managepwfile command with the -action change flag. CMUC001 14E COMMAND_INFO Record VALUE_1 does not exist in password file FILE_NAME . Explanation Yo u are attempting to change or remove a record in the passw[...]

Action Ensure that you have appropriate file creation permissions or alter the quota, and then resubmit the command. CMUC001 18E COMMAND_INFO Unable to update password file FILE_NAME . Explanation Yo u are attempting to update a password file. The system is unable to update the file. This might be because you lack necessary permissions or have exce[...]

Action Use the correct user name and account file name combination, and then resubmit the command. CMUC00122E COMMAND_INFO Invalid admin user. Explanation Yo u are attempting to show a user . Y our user name is not a member of the admin group, and lacks sufficient privileges to use this command. Action Resubmit the command as a user who is a member[...]

CMUC00126E COMMAND_INFO Unable to modify password. Explanation Yo u are attempting to change a user’s password. The password cannot be changed to the specified password. v A password must be a minimum of six alphanumeric characters (a - z, A - Z, or 0 - 9) in length. v A password must contain at least one numeric character (0 - 9). v The initial [...]

Action Specify source volumes that are all contained within the same logical subsystem, and then resubmit the command. Issue separate commands for volumes that are contained within different logical subsystems. CMUC00130E COMMAND_INFO All target volumes must be within the same logical subsystem. Explanation The -tgtss flag is specified with the com[...]

Action None. CMUC00134I COMMAND_INFO User USERNAME successfully modified. Explanation The user has been modified successfully . Action None. CMUC00135W COMMAND_INFO Are you sure you want to delete user USERNAME ? [y/n]: Explanation Yo u are being asked to confirm that you want to delete the user . Action Enter Y to delete the user . Enter N to canc[...]

Action None. CMUC00139E COMMAND_INFO FlashCopy pair VALUE_0 cannot be created. Explanation The FlashCopy pair cannot be created. Action Contact IBM technical support for assistance. CMUC00140I COMMAND_INFO FlashCopy pair VALUE_0 successfully removed. Explanation The command has been invoked without the -cp flag. The specified FlashCopy pair has bee[...]

CMUC00143I COMMAND_INFO Background copy process for FlashCopy pair PAIR_ID successfully started. The persistent relationship will not be removed. Explanation The -cp flag has been used, and the FlashCopy pair is persistent. The background copy process for the FlashCopy pair has started successfully . The FlashCopy volume pair relationship will cont[...]

Action None. CMUC00148W COMMAND_INFO Are you sure you want to close session SESSION_ID ? [y/n]: Explanation Yo u are being asked to confirm that you want to close the session that you specified. Action Enter Y to close the session. Enter N to cancel the operation. CMUC00149I COMMAND_INFO Remote Mirror and Copy path TARGET_LSS successfully establish[...]

CMUC00152W COMMAND_INFO Are you sure you want to remove the Remote Mirror and Copy path PATH_ID ? [y/n]: Explanation Yo u are being asked to confirm that you want to remove the Remote Mirror and Copy path that you specified. Action Enter Y to remove the path. Enter N to cancel the operation. CMUC00153I COMMAND_INFO Remote Mirror and Copy volume pai[...]

CMUC00156I COMMAND_INFO Remote Mirror and Copy volume pair VALUE_0 relationship successfully modified. Explanation The Remote Mirror and Copy source and target volume pair relationship has been modified successfully . Action None. CMUC00157I COMMAND_INFO Remote Mirror and Copy volume pair VALUE_0 relationship successfully paused. Explanation The Re[...]

CMUC00160W COMMAND_INFO Are you sure you want to delete the Remote Mirror and Copy volume pair relationship PAIR_ID ? [y/n]: Explanation Yo u are being asked to confirm that you want to delete the Remote Mirror and Copy volume pair relationship that you specified. Action Enter Y to delete the Remote Mirror and Copy volume pair relationship. Enter N[...]

Action None. CMUC00165I COMMAND_INFO Global Mirror for session SESSION_ID successfully stopped. Explanation Global Mirror for the session has been stopped successfully . Action None. CMUC00166W COMMAND_INFO Are you sure you want to stop the Global Mirror session SESSION_ID ? [y/n]: Explanation Yo u are being asked to confirm that you want to stop t[...]

CMUC00169I COMMAND_INFO FlashCopy volume pair PAIR_ID successfully reversed. Explanation The original FlashCopy source volume has been made the target volume. The original FlashCopy target volume has been made the source volume. Any uncommitted incremental changes to the original source volume data have been overwritten with older data from the new[...]

CMUC00173I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID successfully created. Use the lsremoteflash command to determine copy completion. Explanation The remote FlashCopy relationship has been created and started successfully , but this message is being returned before the copy completes. Use the lsremoteflash command to determine if the copy [...]

CMUC00177I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID successfully reverted. Explanation All new writes to the source volume since the last time data was committed to the target volume are being discarded. Action None. CMUC00178I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID successfully reversed. Explanation The original remote FlashCop[...]

CMUC00181E COMMAND_INFO A user name must be specified. Explanation This command requires a user name. Yo u can specify the user name with the -user command-line flag or in the password file. Action Specify a valid user name, and then resubmit the command. T ip: Enter ″ help command_name ″ for more information. CMUC00182E COMMAND_INFO No managem[...]

rejected because changing the management console server connection is not permitted. Action Open a different session to issue commands to the new management console server . CMUC00185E Unable to access CLI user profile file FILE_NAME . Explanation The CLI is unable to read your user profile for one of the following reasons: v The file does not exis[...]

CMUC00188E Unable to read CLI user password file FILE_NAME . Explanation The CLI is unable to read your user password file for one of the following reasons: v The file does not exist. v The file is in the wrong location. v The file is improperly named. v The file is corrupted. v Yo u lack sufficient privileges on the password directory or file. Act[...]

succession. Y our system administrator can unlock the account with the chuser command. Action Contact your system administrator . CMUC00193E VALUE_0 : Authentication failure: unable to access account database. Explanation Authentication fails because the user account database cannot be accessed. The system administrator might be performing maintena[...]

Action None. CMUC00197I COMMAND_INFO Remote Mirror and Copy pair PAIR_ID successfully failed back. Explanation The source and target volumes have been resynchronized. The data at the production site and recovery site are now identical. Action None. CMUC00198I COMMAND_INFO Remote Mirror and Copy pair PAIR_ID successfully thawed. Explanation All queu[...]

CMUC00201E VALUE_0 : Authentication failure: Your password has expired. Change your password with the chuser command. Explanation Authentication fails because your password has expired. Yo u must change your password with the chuser command before you can issue any other commands. Action Change your password using the chuser command. CMUC00202I COM[...]

Action Set the appropriate access control level for the new password file. CMUC00206I COMMAND_INFO Record VALUE_1 successfully added to password file FILE_NAME . Explanation The specified record has been added to the password file. Action None. CMUC00207I COMMAND_INFO Record VALUE_1 successfully changed in password file FILE_NAME . Explanation The [...]

CMUC00210E Password file FILE_NAME is not formatted corrrectly. Explanation Yo u are attempting to authenticate, but the specified password file is not valid. Either this file is corrupted or it is not the correct file. Action Specify a correctly formatted password file, and then resubmit the task. CMUC0021 1E COMMAND_INFO The specified capacity CA[...]

CMUC00214E COMMAND_INFO File FILE contains no License Machine Code for storage image STORAGE_IMAGE_ID . Explanation The specified file does not contain License Machine Code activation codes for this storage image. The file that you specify must be an xml formatted file that you have obtained from an authorized IBM source, and it must contain activa[...]

CMUC00218E COMMAND_INFO The specified logical control unit number for volume VOLUME is not valid. Either you specified this volume explicitly or you specified it implicitly by parameter values. Explanation The specified logical control unit number contains characters that are not valid or is not an existing logical control unit. Action Specify a va[...]

Chapter 3. DS Storage Manager messages Graphical user interface messages These messages are issued by the DS Storage Manager . CMUG00000E Select an array from the table or create a new array. Explanation To create a rank on an array , you must first select the array from the table of available arrays or create a new array . Action Select an array f[...]

CMUG00003W This operation removes ranks from the extent pools. Select OK to remove the ranks. Select Cancel to cancel the operation. Explanation Yo u are being asked to confirm that you want to remove the ranks from their extent pools. Action Select OK to remove the ranks from the extent pools. Select Cancel to cancel the operation. CMUG00004W This[...]

CMUG00007W The following volumes have storage configured on the selected LCUs: VALUE_0 . These volumes are deleted as part of the LCU deletion process. Select Continue to delete the LCUs. Select Cancel to cancel the operation. Explanation Deleting the logical control units (LCUs) deletes the volumes that are configured on the LCUs. Action Select Co[...]

Action Enter a positive integer value in the field. CMUG00012E Consistency group timeout: A positive integer value is required. Explanation When you define or modify logical control units, you must enter a positive integer value in the consistency group timeout field. The field contains an invalid value. Action Enter a positive integer value in the[...]

CMUG00016E VALUE_0 must be between VALUE_1 and VALUE_2 . Explanation The entered value must be within the specified range that is provided in the message. Action Enter a value within the specified range. CMUG00017E You must enter an alphabetic prefix or a numeric suffix. You may enter both. Explanation This operation assists you in creating a range[...]

Action Select OK to use the prefix and number combination to create volume nicknames with sequentially increasing numbers. Select Cancel to enter names manually . CMUG00020E Too few volume addresses are available to create the volumes specified. Select additional logical subsystems. Explanation Yo u have checked the select LSS check box in the wiza[...]

CMUG00024E You must select at least one volume to complete the operation. Explanation Selecting one or more volumes is required for this operation. No volume is selected. Action Select at least one volume. CMUG00025W Volumes will be deleted. Select OK to delete the volumes. Select Cancel to cancel the operation. Explanation Yo u are being asked to [...]

Action Specify numbers of aliases and base volumes such that the larger number is evenly divisible by the smaller number . CMUG00029E The number of table selections does not agree with the number entered in the text box. Explanation Yo u must select the same number of volumes from the table as you indicated in the text box. Action Select the same n[...]

CMUG00033E The specified combination of volume quantity and size exceeds the available space in the extent pool. Explanation The requested storage space exceeds the available storage space in the extent pool. Action Specify fewer volumes or a smaller volume size such that the requested space is less than or equal to the available space in the exten[...]

Action Enter a numerical value for the suffix. CMUG00037E You must enter an alphabetic prefix or a numeric suffix. You may enter both. Explanation This operation assists you in creating a range of volume nicknames consisting of an alphabetic prefix followed by a number that increases sequentially . If you enter a prefix only , all the volumes you c[...]

Action Enter a nickname 16 characters or shorter in length. CMUG00041E The requested storage is not available. Only VALUE_0 GB is available. Explanation More storage space than the amount that is available has been requested. Action Enter an amount less than or equal to the amount available. CMUG00042E No storage is available for this configuration[...]

CMUG00046E The threshold amount is not available. Only VALUE_0 GB is available. Explanation Yo u are requesting a threshold amount greater than the available amount. Action Enter an amount less than or equal to the available amount. CMUG00047E Select an array site. Explanation When you create custom arrays, you must select at least one array site. [...]

Action Select Continue to delete the arrays and volumes that are listed in the message. Select Cancel to cancel the operation. CMUG00051E Array creation is not possible. No array sites are available on the storage image. Explanation Arrays are created on array sites. Yo u have selected the Create arrays automatically radio button, but the necessary[...]

CMUG00055E Select one or more host types. Explanation To create a volume group, you must select one or more host types that can be attached to the volume group. As you select types, the list of available types is automatically narrowed to a set of compatible host types. Action Select one or more host types from the list of available host types. CMU[...]

CMUG00060E Select WWPNs for all the ports. Explanation For communication and security purposes, each host port is identified by its worldwide unique port name (WWPN). A list of names is provided in the drop-down box. Yo u must identify each port in this host attachment by selecting a name from the list or manually entering a WWPN. Action To identif[...]

CMUG00064E A host nickname is required. Explanation Yo u must identify the host system by supplying a host nickname before modifications can be performed. Action Enter a host nickname. CMUG00065E The port quantity is required. Provide the number of ports for this host attachment. Explanation Yo u are modifying a host attachment, but no quantity is [...]

Action Select a host attachment identifier from the table. CMUG00069W These hosts will be deleted: VALUE_0 . Select Continue to delete the hosts. Select Cancel to cancel the operation. Explanation Yo u are being asked to confirm that you want to delete the hosts that you have selected. Action Select Continue to delete the hosts. Select Cancel to ca[...]

CMUG00072W The selected storage complexes will be deleted. Select OK to delete the storage complexes. Select Cancel to cancel the operation. Explanation Yo u are being asked to confirm that you want to remove the storage complexes that you have selected from the list. Action Select OK to delete the storage complexes. Select Cancel to cancel the ope[...]

CMUG00076W You have selected a choice that will force the offline sequence for this storage unit. Select OK to force the storage unit offline. Select Cancel to cancel the operation. Explanation If you proceed, the unit is forced offline. Action Select OK to force the storage unit offline. Select Cancel to cancel the operation. CMUG00077W You have s[...]

CMUG00080W Do you want to delete the simulated storage units STORAGE_UNITS in the selected storage complexes as well? Select OK to delete the storage units. Select Continue to delete only the storage complexes. Select Cancel to cancel the operation. Explanation Yo u have assigned simulated storage units to the storage complexes that you intend to d[...]

CMUG00083E Invalid I/O adapter quantity. The quantity must be between VALUE_0 . and VALUE_1 . Explanation An invalid adapter quantity has been specified. For any entry field, you can enter a value between 2 and 32. The total number of adapters for all fields must be less than or equal to 32. Action Specify a valid adapter quantity . CMUG00084W The [...]

is to be applied from a list of the storage images on the storage unit. No storage image is selected. Action Select a storage image from the list. CMUG00088E Select an xml file containing License Machine Code activation codes for this storage image. Explanation Yo u have chosen to import your License Machine Code activation codes using an xml forma[...]

CMUG00091W The current License Machine Code activation codes will be overwritten by the codes being imported. Select Continue to overwrite the current codes with the new codes. Select Cancel to cancel the operation. Explanation Yo u are being asked to confirm that you want to overwrite the current License Machine Code activation codes with values i[...]

CMUG00095E Unable to attach host. No compatible I/O ports are available on the storage image. Explanation Yo u have selected a host to attach to an I/O port, but no compatible I/O ports are available on the storage image. Action Add a compatible I/O port to the storage image or make an existing port available, and then resubmit the task. CMUG00096E[...]

CMUG00099W Select an xml file that contains an enterprise configuration. Explanation This process imports an enterprise configuration by reading an xml file on your file system. No xml file is selected, or the file cannot be found. Action Select an enterprise configuration file that is in the correct xml format, and then resubmit the task. CMUG0010[...]

CMUG00103E Enter unique WWPNs for ports VALUE_0 . Explanation Host ports must have unique worldwide port names (WWPNs). The same WWPN is entered more than once. Action Enter unique WWPNs for each port, and then resubmit the task. CMUG00104E Unable to attach host port PORT . WWPNs WWPN_IDs are being used by another host port on storage image IMAGE .[...]

CMUG00107E A nickname must be between 1 and 16 characters long. Explanation Yo u must specify a nickname that is between 1 and 16 characters in length. Action Specify a nickname between 1 and 16 characters long, and then resubmit the task. CMUG00108E You must select at least one array site before you can continue. Explanation To create an array , y[...]

CMUG001 1 1E The nickname NICKNAME is already used for another host. Enter a unique nickname. Explanation The nickname that you specified is not unique. A unique nickname is required. Action Specify a unique nickname, and then resubmit the task. CMUG001 12E The storage complex found at the specified IP address is offline. Only online storage comple[...]

CMUG001 15E Select a machine model from the list. Explanation The model is required. Action Select a model from the list, and then resubmit the task. CMUG001 16E Storage image ID has been configured on this storage management console, but it is not accessible at this time. Explanation The storage image may be unavailable for one of the following re[...]

Action Select Continue to reconfigure the selected I/O ports. Select Cancel to cancel the operation. CMUG001 19E Invalid value: VALUE_0 entered for VALUE_1 . The WWPN must be a hexadecimal number between VALUE_2 and VALUE_3 . Explanation The port specification contains an invalid value for the worldwide port name of a host port. Yo u must enter a h[...]

Action Configure one or more additional extent pools, and then resubmit the task. CMUG00123E The selected storage complexes do not exist in the current configuration. Explanation Yo u began to delete one or more storage complexes from an enterprise, but the enterprise configuration changed or the enterprise was closed before you completed the task [...]

0.1 (0.1) 0.2 (0.2) 0.3 (0.3) 0.4 (0.4) 0.9 (0.8) 1.0 (0.9) 1.1 (1.0) 1.2 (1.1) 1.7 (1.6) 1.8 (1.7) 1.9 (1.8) 2.0 (1.9) 2.5 (2.3) 2.6 (2.4) 2.7 (2.5) 2.8 (2.6) 3.3 (3.1) 3.4 (3.2) 3.5 (3.3) 3.6 (3.4) 3.7 (3.4) 4.2 (3.9) 4.3 (4.0) 4.4 (4.1) 4.5 (4.2) 5.0 (4.7) 5.1 (4.7) 5.2 (4.8) 5.3 (4.9) 5.8 (5.4) 5.9 (5.5) 6.0 (5.6) 6.1 (5.7) 6.7 (6.2) 6.8 (6.3) [...]

52.9 (49.3) 53.0 (49.4) 53.1 (49.5) 53.2 (49.5) 53.7 (50.0) 53.8 (50.1) 53.9 (50.2) 54.0 (50.3) 54.5 (50.8) 54.6 (50.9) 54.7 (50.9) 54.8 (51.0) 54.9 (51.1) 55.4 (51.6) 55.5 (51.7) 55.6 (51.8) 55.7 (51.9) 56.2 (52.3) 56.3 (52.4) 56.4 (52.5) 56.5 (52.6) 57.0 (53.1) 57.1 (53.2) 57.2 (53.3) 57.3 (53.4) 57.9 (53.9) 58.0 (54.0) 58.1 (54.1) 58.2 (54.2) 58[...]

106.1 (98.8) 106.6 (99.3) 106.7 (99.4) 106.8 (99.5) 106.9 (99.6) 107.4 (100.0) 107.5 (100.1) 107.6 (100.2) 107.7 (100.3) 108.2 (100.8) 108.3 (100.9) 108.4 (101.0) 108.5 (101.0) 109.1 (101.6) 109.2 (101.7) 109.3 (101.8) 109.4 (101.9) 109.9 (102.4) 110.0 (102.4) 110.1 (102.5) 110.2 (102.6) 110.7 (103.1) 110.8 (103.2) 110.9 (103.3) 111.0 (103.4) 111.5[...]

159.7 (148.7) 160.3 (149.3) 160.4 (149.4) 160.5 (149.5) 160.6 (149.6) 161.1 (150.0) 161.2 (150.1) 161.3 (150.2) 161.4 (150.3) 161.9 (150.8) 162.0 (150.9) 162.1 (151.0) 162.2 (151.1) 162.7 (151.5) 162.8 (151.6) 162.9 (151.7) 163.0 (151.8) 163.6 (152.4) 163.7 (152.5) 163.8 (152.6) 163.9 (152.6) 164.4 (153.1) 164.5 (153.2) 164.6 (153.3) 164.7 (153.4) [...]

213.4 (198.7) 213.9 (199.2) 214.0 (199.3) 214.1 (199.4) 214.2 (199.5) 214.8 (200.0) 214.9 (200.1) 215.0 (200.2) 215.1 (200.3) 215.6 (200.8) 215.7 (200.9) 215.8 (201.0) 215.9 (201.1) 216.4 (201.5) 216.5 (201.6) 216.6 (201.7) 216.7 (201.8) 217.2 (202.3) 217.3 (202.4) 217.4 (202.5) 217.5 (202.6) 218.1 (203.1) 218.2 (203.2) 218.3 (203.3) 218.4 (203.4) [...]

267.1 (248.8) 267.6 (249.2) 267.7 (249.3) 267.8 (249.4) 267.9 (249.5) 268.4 (250.0) 268.5 (250.1) 268.6 (250.2) 268.7 (250.2) 269.3 (250.8) 269.4 (250.9) 269.5 (251.0) 269.6 (251.1) 270.1 (251.6) 270.2 (251.6) 270.3 (251.7) 270.4 (251.8) 270.9 (252.3) 271.0 (252.4) 271.1 (252.5) 271.2 (252.6) 271.7 (253.0) 271.8 (253.1) 271.9 (253.2) 272.0 (253.3) [...]

320.8 (298.8) 321.3 (299.2) 321.4 (299.3) 321.5 (299.4) 321.6 (299.5) 322.1 (300.0) 322.2 (300.1) 322.3 (300.2) 322.4 (300.3) 322.9 (300.7) 323.0 (300.8) 323.1 (300.9) 323.2 (301.0) 323.8 (301.6) 323.9 (301.7) 324.0 (301.7) 324.1 (301.8) 324.6 (302.3) 324.7 (302.4) 324.8 (302.5) 324.9 (302.6) 325.4 (303.1) 325.5 (303.1) 325.6 (303.2) 325.7 (303.3) [...]

374.4 (348.7) 375.0 (349.2) 375.1 (349.3) 375.2 (349.4) 375.3 (349.5) 375.8 (350.0) 375.9 (350.1) 376.0 (350.2) 376.1 (350.3) 376.6 (350.7) 376.7 (350.8) 376.8 (350.9) 376.9 (351.0) 377.4 (351.5) 377.5 (351.6) 377.6 (351.7) 377.7 (351.8) 377.8 (351.9) 378.3 (352.3) 378.4 (352.4) 378.5 (352.5) 378.6 (352.6) 379.1 (353.1) 379.2 (353.2) 379.3 (353.3) [...]

428.1 (398.7) 428.6 (399.2) 428.7 (399.3) 428.8 (399.4) 428.9 (399.4) 429.0 (399.5) 429.5 (400.0) 429.6 (400.1) 429.7 (400.2) 429.8 (400.3) 430.3 (400.7) 430.4 (400.8) 430.5 (400.9) 430.6 (401.0) 431.1 (401.5) 431.2 (401.6) 431.3 (401.7) 431.4 (401.8) 431.9 (402.2) 432.0 (402.3) 432.1 (402.4) 432.2 (402.5) 432.3 (402.6) 432.8 (403.1) 432.9 (403.2) [...]

481.7 (448.6) 481.8 (448.7) 482.3 (449.2) 482.4 (449.3) 482.5 (449.4) 482.6 (449.5) 483.1 (449.9) 483.2 (450.0) 483.3 (450.1) 483.4 (450.2) 483.5 (450.3) 484.0 (450.8) 484.1 (450.9) 484.2 (450.9) 484.3 (451.0) 484.8 (451.5) 484.9 (451.6) 485.0 (451.7) 485.1 (451.8) 485.6 (452.3) 485.7 (452.3) 485.8 (452.4) 485.9 (452.5) 486.4 (453.0) 486.5 (453.1) [...]

535.3 (498.5) 535.4 (498.6) 535.5 (498.7) 536.0 (499.2) 536.1 (499.3) 536.2 (499.4) 536.3 (499.5) 536.8 (499.9) 536.9 (500.0) 537.0 (500.1) 537.1 (500.2) 537.6 (500.7) 537.7 (500.8) 537.8 (500.9) 537.9 (501.0) 538.0 (501.1) 538.5 (501.5) 538.6 (501.6) 538.7 (501.7) 538.8 (501.8) 539.3 (502.3) 539.4 (502.4) 539.5 (502.4) 539.6 (502.5) 540.1 (503.0) [...]

588.9 (548.5) 589.0 (548.5) 589.1 (548.6) 589.2 (548.7) 589.7 (549.2) 589.8 (549.3) 589.9 (549.4) 590.0 (549.5) 590.5 (549.9) 590.6 (550.0) 590.7 (550.1) 590.8 (550.2) 591.3 (550.7) 591.4 (550.8) 591.5 (550.9) 591.6 (551.0) 592.1 (551.4) 592.2 (551.5) 592.3 (551.6) 592.4 (551.7) 592.5 (551.8) 593.0 (552.3) 593.1 (552.4) 593.2 (552.5) 593.3 (552.6) [...]

642.5 (598.4) 642.6 (598.5) 642.7 (598.6) 642.8 (598.7) 643.3 (599.1) 643.4 (599.2) 643.5 (599.3) 643.6 (599.4) 643.7 (599.5) 644.2 (600.0) 644.3 (600.1) 644.4 (600.1) 644.5 (600.2) 645.0 (600.7) 645.1 (600.8) 645.2 (600.9) 645.3 (601.0) 645.8 (601.4) 645.9 (601.5) 646.0 (601.6) 646.1 (601.7) 646.7 (602.3) 646.8 (602.4) 646.9 (602.5) 647.0 (602.6) [...]

695.7 (647.9) 696.2 (648.4) 696.3 (648.5) 696.4 (648.6) 696.5 (648.7) 697.0 (649.1) 697.1 (649.2) 697.2 (649.3) 697.3 (649.4) 697.9 (650.0) 698.0 (650.1) 698.1 (650.2) 698.2 (650.2) 698.7 (650.7) 698.8 (650.8) 698.9 (650.9) 699.0 (651.0) 699.5 (651.5) 699.6 (651.6) 699.7 (651.6) 699.8 (651.7) 700.3 (652.2) 700.4 (652.3) 700.5 (652.4) 700.6 (652.5) [...]

749.4 (697.9) 749.9 (698.4) 750.0 (698.5) 750.1 (698.6) 750.2 (698.7) 750.7 (699.1) 750.8 (699.2) 750.9 (699.3) 751.0 (699.4) 751.5 (699.9) 751.6 (700.0) 751.7 (700.1) 751.8 (700.2) 752.4 (700.7) 752.5 (700.8) 752.6 (700.9) 752.7 (701.0) 753.2 (701.5) 753.3 (701.6) 753.4 (701.7) 753.5 (701.8) 754.0 (702.2) 754.1 (702.3) 754.2 (702.4) 754.3 (702.5) [...]

803.0 (747.9) 803.6 (748.4) 803.7 (748.5) 803.8 (748.6) 803.9 (748.7) 804.4 (749.2) 804.5 (749.2) 804.6 (749.3) 804.7 (749.4) 805.2 (749.9) 805.3 (750.0) 805.4 (750.1) 805.5 (750.2) 806.0 (750.6) 806.1 (750.7) 806.2 (750.8) 806.3 (750.9) 806.9 (751.5) 807.0 (751.6) 807.1 (751.7) 807.2 (751.8) 807.7 (752.2) 807.8 (752.3) 807.9 (752.4) 808.0 (752.5) [...]

856.7 (797.9) 857.2 (798.3) 857.3 (798.4) 857.4 (798.5) 857.5 (798.6) 858.1 (799.2) 858.2 (799.3) 858.3 (799.4) 858.4 (799.4) 858.9 (799.9) 859.0 (800.0) 859.1 (800.1) 859.2 (800.2) 859.7 (800.7) 859.8 (800.8) 859.9 (800.8) 860.0 (800.9) 860.5 (801.4) 860.6 (801.5) 860.7 (801.6) 860.8 (801.7) 861.4 (802.2) 861.5 (802.3) 861.6 (802.4) 861.7 (802.5) [...]

910.4 (847.9) 910.9 (848.3) 911.0 (848.4) 911.1 (848.5) 911.2 (848.6) 911.7 (849.1) 911.8 (849.2) 911.9 (849.3) 912.0 (849.4) 912.6 (849.9) 912.7 (850.0) 912.8 (850.1) 912.9 (850.2) 913.4 (850.7) 913.5 (850.8) 913.6 (850.9) 913.7 (850.9) 914.2 (851.4) 914.3 (851.5) 914.4 (851.6) 914.5 (851.7) 915.0 (852.2) 915.1 (852.3) 915.2 (852.3) 915.3 (852.4) [...]

964.1 (897.9) 964.6 (898.4) 964.7 (898.4) 964.8 (898.5) 964.9 (898.6) 965.4 (899.1) 965.5 (899.2) 965.6 (899.3) 965.7 (899.4) 966.2 (899.8) 966.3 (899.9) 966.4 (900.0) 966.5 (900.1) 966.6 (900.2) 967.1 (900.7) 967.2 (900.8) 967.3 (900.9) 967.4 (901.0) 967.9 (901.4) 968.0 (901.5) 968.1 (901.6) 968.2 (901.7) 968.7 (902.2) 968.8 (902.3) 968.9 (902.4) [...]

CMUG00127E No volume groups exist. You must create a volume group before you can continue. Explanation Yo u must create at least one volume group before you can add a volume to a volume group. Action Create at least one volume group, and then resubmit the task. CMUG00128E These storage images are already logically configured: VALUE_0 . Reconfigurin[...]

Action Ensure that the storage complex is online and that a network connection is available. Then resubmit the task. CMUG00131E The specified location for adapter ADAPTER is already in use. Explanation The location that you specified for the adapter is already in use. Action Specify an unused adapter location and then resubmit the task. CMUG00132E [...]

CMUG00135E The selected storage unit is not available. Explanation The configuration cannot be applied to the selected storage unit because the storage unit is not online in a normal state. Action Ensure that the storage unit is available and then resubmit the task, or select a different storage unit. CMUG00136E The selected storage image is not av[...]

CMUG00139E The number of base volumes in each selected logical control unit must be a whole number multiple of the number of base volumes you enter. Fractional ratios are not permitted. Explanation The number of base volumes in one or more logical control units is not a whole number multiple of the specified number of base volumes. Action Enter a n[...]

Chapter 4. DS Storage Manager Copy Services messages Copy Services related messages These messages are issued by the DS Storage Manager . CMUS00000W This operation deletes the selected FlashCopy relationships. Click OK to delete the FlashCopy relationships. Click Cancel to cancel the operation. Explanation Yo u are being asked to confirm that you w[...]

Action Select the same number of target volumes as source volumes. CMUS00004E You must select at least one source volume to create relationships. Explanation To create a FlashCopy relationship, you must select a source volume. Action Select a source volume from the table. CMUS00005E You must select the same number of target volumes as source volume[...]

CMUS00008E The FlashCopy reverse fails. Explanation Yo u are attempting to reverse the source and target volumes of a FlashCopy relationship. The reverse fails. Action Contact IBM technical support for assistance. CMUS00009E You must select a source logical subsystem. Explanation To create a path, you must select a source logical subsystem. Action [...]

CMUS00013W This operation deletes paths that might be used by Remote Mirror and Copy pairs. If you continue, data transfer bandwidth might be lowered. Click Continue to delete the paths. Click Cancel to cancel the operation. Explanation Yo u are being asked to confirm that you want to delete the selected paths. Action Click Continue to delete the p[...]

CMUS00017E Unable to start Global Mirror session. Explanation The graphical user interface reports an unknown error returned from the management console server . The Global Mirror session does not start. Action Contact IBM technical support for assistance. CMUS00018E Invalid session number. Explanation A session number must be a two-character hexad[...]

CMUS00021E Enable change recording option: no valid value selected Explanation No valid value is selected for the Enable change recording option. Yo u must select either Enable all or Disable all . Action Select either Enable all or Disable all , and then resubmit the task. CMUS00022E Permit FlashCopy to occur if target volume is online for host ac[...]

CMUS00025E The relationship properties cannot be displayed. The relationship no longer exists. Explanation The specified relationship has been removed by another user , or it was removed automatically when a background copy completed. Action Close the properties page. The relationship will disappear from the main panel. Select a different relations[...]

CMUS00029E No source LSS is available in the selected storage image. Explanation No source logical subsystem is available in the selected storage image. A path cannot be created without a source LSS. Action Select a storage image that has an available source logical subsystem, and then resubmit the task. CMUS00030W The selected storage unit or imag[...]

CMUS00033E Select at least one volume. Explanation At least one volume must be selected before you can create a Global Mirror relationship. No volume has been selected. Action Select at least one volume, and then resubmit the task. CMUS00034E No session numbers are available for the selected volumes. Explanation No available sessions exist because [...]

128 IBM T otalStorage DS8000: Messages Reference[...]

Chapter 5. DS Storage Manager console messages Console messages These messages are issued by the DS Storage Manager . CMUL00000E GUI console operation error: page exception Explanation The graphical user interface console reports an internal error . Action Ensure that the correct version of the interface software is installed. If the error persists[...]

CMUL00004E GUI console operation error: Java runtime exception Explanation The graphical user interface console reports an internal error . Action Ensure that the correct versions of the interface software and the Java runtime environment are installed. If the error persists, contact IBM technical support. CMUL00005E GUI console operation error: GU[...]

CMUL00009E Invalid value: VALUE_0 . Only integer values are allowed. Explanation The specification contains a non integer value. Only integer values are allowed. Action Enter an integer value, and then resubmit the task. CMUL00010E VALUE_0 : All components of the IP field are required. Explanation Yo u must enter a complete IP address. At least one[...]

CMUL00014E Supply values for all the required fields. Explanation Not all of the required fields contain information. Action Enter values in all the required fields, and then resubmit the task. CMUL00015E Value too small: VALUE_0 . The value that you enter must be an integer greater than or equal to VALUE_1 . Explanation The value is smaller than t[...]

Action Enter a value within the specified range. CMUL00019E Invalid value: VALUE_0 Explanation An integer or decimal number is required. Non numeric characters are invalid. Action Enter a numeric value, and then resubmit the task. CMUL00020E Invalid activation code format: VALUE_0 The code must be VALUE_1 groups of four-digit hexadecimal numbers, s[...]

CMUL00023E Value too small: VALUE_0 . The value you enter must be greater than VALUE_1 . Explanation The entered hexadecimal number is too small. Action Enter a valid hexadecimal number larger than the provided value. CMUL00024E Value too large: VALUE_0 . The value you enter must be smaller than VALUE_1 . Explanation The entered hexadecimal number [...]

CMUL00028E Invalid value: VALUE_0 . This number must be a percentage, entered as an integer between VALUE_1 and VALUE_2 . Explanation The value must be an integer percentage. The specified value is not an integer percentage. Action Enter an integer between the provided limits, and then resubmit the task. CMUL00029E Unauthorized user Explanation Y o[...]

136 IBM T otalStorage DS8000: Messages Reference[...]

Chapter 6. DS Storage Manager service messages Service messages These messages are issued by the DS Storage Manager . CMUR00000W You are about to generate a test problem. A SNMP message will be triggered and a test problem will be sent to IBM via Call Home. Click Continue to create the test problem. Click Cancel to cancel the operation. Explanation[...]

CMUR00003W You are about to close the selected log entry. This will have no effect on the associated hardware resource. Once closed, the log entry cannot be reopened. All light path indicators associated with this log entry will be extinguished. Click Continue to close the log entry. Click Cancel to cancel the operation. Explanation Yo u are being [...]

CMUR00006W This operation ends the long running task. Click OK to end the long running task. Click Cancel to cancel the operation. Explanation A long running task is taking place or is in an error state. If you click OK the task will be ended before it completes. Some processes will not finish, and you might have to perform other tasks to make affe[...]

CMUR00010E The password and confirmation password do not match. Explanation Yo u must enter the same text for password and confirmation password to proceed. The password and confirmation password are not identical. Action Enter the same text for both the password and confirmation, and then resubmit the task. CMUR0001 1W User accounts will be delete[...]

CMUR00014E No storage unit is available. This panel cannot be used unless there is at least one storage unit online. Navigate to the Storage Unit panel to verify the status of the managed storage units before you continue. Explanation The panel that you are attempting to use requires that at least one storage unit is online and available to the sto[...]

main page and issue the Attempt Connection task from the Action drop-down list. Ensure that connections exist and systems are online and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUR00017E The attempt to take the selected resource offline does not complete. Explanation The task cannot complete b[...]

CMUR00020W This operation takes a long time to complete. If you proceed, you must click the Refresh button on the Status tab in order to see the latest data. Click Continue to take the resource offline. Click Cancel to cancel the operation. Explanation Yo u have selected a resource to take offline, but you are being warned that you are about to ini[...]

144 IBM T otalStorage DS8000: Messages Reference[...]

Chapter 7. DS storage management console server messages Server messages These messages are issued by the DS storage management console server . CMUN00000E SOURCE Authentication failure Explanation The storage management console server reports an authentication failure. Authentication information that is provided by the client is invalid. Action Pr[...]

Action Contact IBM technical support for assistance. CMUN00005E SOURCE Internal error Explanation The storage management console server reports an internal Copy Services failure. Action Contact IBM technical support for assistance. CMUN00006E SOURCE Internal error Explanation The storage management console server reports an internal error . Action [...]

CMUN00009E SOURCE Invalid parameter Explanation The storage management console server detects an invalid or nonexistent parameter . Examples include: v An invalid volume v An invalid logical subsystem v An invalid storage image Action Correctly specify all parameters, and then resubmit the task. If the problem persists, contact IBM technical suppor[...]

CMUN00013E SOURCE Resource not found Explanation The storage management console server reports that it cannot find a resource. This might be because the resource is not configured on the console, or because it does not exist in the storage complex. Action Check the available resources and specify the correct parameters. If the problem persists, con[...]

Action V erify your user name and privileges. If your password has expired, renew your password. Contact your system administrator . CMUN00018E SOURCE Unable to connect to the storage management console server Explanation Y our client software cannot connect to the storage management console server . This might be because the server is not enabled,[...]

CMUN00022E SOURCE The specified operation is unsupported. Explanation The storage management console server reports that the command that it received is unsupported. This might be because the command is invalid, because the client issuing the command is at a different software version level than the server , or because the operation is not licensed[...]

Action Specify count-key-data volumes in a CKD logical subsystem, and then resubmit the task. CMUN02001E SOURCE Error: The logical volume has been created, but it is not assigned to an address group. Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. [...]

CMUN02005E SOURCE Operation failure: already assigned Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02006E SOURCE Unable to query rank Explanation The storage management console server reports a storage unit microcode-level error . Action Con[...]

CMUN02010E SOURCE Unable to create array Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN0201 1E SOURCE Unable to create array: internal interface communication error Explanation The storage management console server reports a storage unit micr[...]

CMUN02014E SOURCE Cannot delete array. The array is flagged to be serviced. Explanation The array is flagged for service. An array in this state cannot be deleted until the service intent flag is removed. Action W ait until service is completed on the array , and then resubmit the task. CMUN02015E SOURCE Unable to delete rank: The rank is still ass[...]

Action Monitor system status, and resubmit the task when both servers are online. If the problem persists, contact IBM technical support for assistance. CMUN02019E SOURCE Cannot exceed maximum volume group count Explanation The maximum volume group count has been reached. A new volume group cannot be created. Action Remove unused volume groups, and[...]

CMUN02023E SOURCE Unable to modify logical subsystem: cannot set session timeout Explanation The specified session timeout value is negative. Only positive values are valid. Action Specify a valid timeout value, and then resubmit the task. CMUN02024E SOURCE Unable to modify logical subsystem: invalid critical mode enabled Explanation The specificat[...]

CMUN02027E SOURCE Unable to modify logical subsystem: cannot set session timeout Explanation The specified session timeout value is negative. Only positive values are valid. Action Specify a valid timeout value, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02028E SOURCE Cannot use array site[...]

Action Ensure that any other tasks that you have initiated have been completed. W ait, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02032E SOURCE Unable to create logical volume Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IB[...]

CMUN02036E SOURCE Unable to delete array Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02037E SOURCE Unable to delete array Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM te[...]

Action Delete the ranks on the array or wait until the format completes, and then resubmit the task. CMUN02041E SOURCE Unable to create logical subsystem: device type must be CKD Explanation The specified device type must be count-key-data. Action Specify a CKD device type, and then resubmit the task. If the problem persists, contact IBM technical [...]

Action Contact IBM technical support for assistance. CMUN02046E SOURCE Operation failure: unable to allocate memory Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02047E SOURCE Operation failure Explanation The storage management console serve[...]

Action Contact IBM technical support for assistance. CMUN02051E SOURCE Unable to repair array Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02052E SOURCE Storage unit unavailable Explanation An invalid or unknown storage unit is specified. Ac[...]

Action Resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02056E SOURCE Operation failure: unable to allocate memory Explanation The storage management console server reports a storage unit microcode-level error . The storage unit is unable to allocate memory . This might be a temporary problem that occurs[...]

CMUN02060E SOURCE Unable to create extent pool Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02061E SOURCE Create logical subsystem failure Explanation The storage management console server reports a storage unit microcode-level error . Actio[...]

CMUN02065E SOURCE Operation failure: device adapter cannot query data Explanation The storage management console server reports a storage unit microcode-level error . This might be a temporary problem due to heavy traffic, or it might indicate a hardware failure. Action Check for device adapter and storage device hardware errors, and follow the rec[...]

Action Correct the port specification, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02070E SOURCE Unable to create SCSI host port: invalid WWPN Explanation The worldwide port name is invalid. A WWPN must be a 16-character hexadecimal string. Action Provide a valid worldwide port name, and th[...]

CMUN02074E SOURCE Unable to create volume group: invalid user name Explanation The specified user name is longer than the 16-character maximum length. Action Specify a valid user name, and then resubmit the task. CMUN02075E SOURCE Unable to delete extent pool Explanation The storage management console server reports a storage unit microcode-level e[...]

CMUN02079E SOURCE Operation failure Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02080E SOURCE Unable to create array: The maximum number of arrays have been created. Explanation The array cannot be created because the maximum allowed number[...]

Action Contact IBM technical support for assistance. CMUN02084E SOURCE Unable to delete extent pool Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02085E SOURCE Unable to delete extent pool Explanation The storage management console server rep[...]

Action Contact IBM technical support for assistance. CMUN02089E SOURCE Failed to initialize LPAR Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02090E SOURCE LPAR startup error Explanation The storage management console server reports a storag[...]

Action Contact IBM technical support for assistance. CMUN02094E SOURCE Failed to initialize LPAR Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02095E SOURCE Unable to create logical volume Explanation The specification contains an invalid com[...]

Action Contact IBM technical support for assistance. CMUN02099E SOURCE Unable to create volume group Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02100E SOURCE Volume group operation failure Explanation The storage management console server [...]

Action Contact IBM technical support for assistance. CMUN02104E SOURCE Unable to assign volume to volume group Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02105E SOURCE Unable to retrieve volumes assigned to volume group Explanation The sto[...]

Action Specify a different volume group, and then resubmit the task. CMUN02109E SOURCE Unable to modify SCSI host port Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN021 10E SOURCE Unable to modify SCSI host port: invalid address discovery met[...]

CMUN021 13E SOURCE Unable to modify SCSI host port: logical block size and volume group type mismatch Explanation A 520-byte block size requires a SCSI520-All or SCSI520-Mask volume group type. Action Specify a valid volume group type, and then resubmit the task. CMUN021 14E SOURCE Unable to modify SCSI host port: invalid logical block size Explana[...]

CMUN021 17E SOURCE Unable to modify SCSI host port: invalid override default priority value Explanation The attribute that indicates whether the default priority for I/O operations is to be overridden is invalid. The value must be either true or false . Action Correct the port specification, and then resubmit the task. If the problem persists, cont[...]

CMUN02121E SOURCE Unable to modify SCSI host port: address discovery method and volume group type mismatch Explanation The LUN Polling address discovery method requires a SCSI-All, SCSI-Map 256, SCSI520-All, or Copy Services volume group type. Action Specify compatible address discovery method and volume group types, and then resubmit the task. CMU[...]

Action Contact IBM technical support for assistance. CMUN02126E SOURCE Unable to repair array Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02127E SOURCE Unable to modify volume group Explanation The storage management console server reports [...]

Action Contact IBM technical support for assistance. CMUN02131E SOURCE Internal database overwrite failure: The database exists and overwrite is off. Explanation The storage management console server reports a storage unit microcode-level error . Database overwrite permission is turned off for an existing database. The database cannot be overwritte[...]

CMUN02135E SOURCE Volume group query failure Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02136E SOURCE Unable to query volume groups: invalid volume number Explanation The specification contains an invalid volume identifier . A logical volu[...]

Action Contact IBM technical support for assistance. CMUN02140E SOURCE Unable to create rank Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02141E SOURCE Rank creation failure: check device adapter Explanation The storage management console se[...]

Action Contact IBM technical support for assistance. CMUN02145E SOURCE Unable to create rank Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02146E SOURCE Rank creation failure: server unavailable Explanation The storage management console serv[...]

Action Contact IBM technical support for assistance. CMUN02150E SOURCE Unable to delete rank Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02151E SOURCE Unable to delete rank Explanation The storage management console server reports a storage[...]

Action Contact IBM technical support for assistance. CMUN02155E SOURCE Rank operation failure: device adapter error Explanation The storage management console server reports a storage unit microcode-level error . Action Check for device adapter and storage device hardware errors, and follow the recommended service procedure. If the problem persists[...]

CMUN02159E SOURCE Rank reconfiguration failure: The rank is flagged to be serviced. Explanation The specified rank is flagged for service. A rank cannot be reconfigured while it is flagged for service. Action W ait until the service is completed, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN[...]

Action Contact IBM technical support for assistance. CMUN02164E SOURCE Rank operation failure Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02165E SOURCE Unable to unassign rank Explanation The storage management console server reports a stor[...]

v A SCSI520-Mask volume group requires a 520-byte block protected data type or a 520-byte block unprotected data type. Action Specify volumes with compatible data types, and then resubmit the task. CMUN02169E SOURCE Unable to assign volume to volume group Explanation The storage management console server reports a storage unit microcode-level error[...]

CMUN02173E SOURCE Unable to assign volume to volume group: data type mismatch Explanation The data type of the volume does not match the data type of the volume group. v A SCSI-Mask volume group requires a 512-byte block data type. v A SCSI520-Mask volume group requires a 520-byte block protected data type or a 520-byte block unprotected data type.[...]

Action Create at least one rank and volume, and then resubmit the task. CMUN02178E SOURCE Unable to reset Copy Services settings on logical subsystems Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02179E SOURCE Unable to reset Copy Services s[...]

Action Contact IBM technical support for assistance. CMUN02183E SOURCE Unable to modify SCSI host port Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02184E SOURCE Unable to modify SCSI host port Explanation The storage management console serv[...]

CMUN02187E SOURCE Unable to retrieve volumes assigned to the volume group: no ranks exist Explanation No ranks exist on the storage image. V olume information is not available. Action Create at least one rank and volume on the storage image, and then resubmit the task. CMUN02188E SOURCE Unable to retrieve volumes assigned to volume group. Explanati[...]

Action Contact IBM technical support for assistance. CMUN02192E SOURCE Unable to query rank Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02193E SOURCE Operation failure Explanation The storage management console server reports a storage unit[...]

Action Contact IBM technical support for assistance. CMUN02197E SOURCE Unable to modify SCSI host port: invalid port profile Explanation The port profile is not a supported port profile. Action Specify a valid and supported port profile, and then resubmit the task. CMUN02198E SOURCE Unable to create, modify, or delete SCSI host port: local server o[...]

CMUN02201E SOURCE Unable to assign volumes to volume group Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02202E SOURCE Unable to assign volumes to volume group Explanation The storage management console server reports a storage unit microcode[...]

CMUN02206E SOURCE Unable to unassign rank Explanation Only ranks in the reserved state can be unassigned. The rank is not in the reserved state. Action Place the rank in the reserved state, or choose a reserved rank, and then resubmit the task. CMUN02207E SOURCE Unable to unassign rank Explanation The storage management console server reports a sto[...]

Action Contact IBM technical support for assistance. CMUN0221 1E SOURCE Unable to delete volume group Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02212E SOURCE Unable to delete volume group: The volume group is still assigned to a SCSI host[...]

Action Contact IBM technical support for assistance. CMUN02216E SOURCE Unable to modify volume group Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02217E SOURCE Operation failure Explanation The storage management console server reports a sto[...]

CMUN02220E SOURCE Unable to retrieve or assign volumes assigned to volume group: local server offline Explanation The storage management console server reports a storage unit microcode-level error . A local server is not online. Microcode initialization might not have completed, or a failover has occurred and one server has not yet restarted. Actio[...]

CMUN02224E SOURCE Unable to create volume group: invalid volume group type Explanation The specified volume group type is invalid. The following volume group types are valid: v SCSI-Mask v SCSI-Map 256 v SCSI520-Mask v Copy Services Action Specify a valid volume group type, and then resubmit the task. CMUN02225E SOURCE Unable to assign rank to exte[...]

CMUN02228E SOURCE Rank creation cannot complete. Explanation The storage management console server reports a storage unit microcode-level error . Action Check for device adapter and storage device hardware errors, and follow the recommended service procedure. If the problem persists, contact IBM technical support for assistance. CMUN02229E SOURCE U[...]

CMUN02232E SOURCE Unable to create logical subsystem: device type mismatch Explanation The device type of the new logical subsystem is inconsistent with the device type of existing logical subsystems in the address group. Action Specify consistent device types, and then resubmit the task. If the problem persists, contact IBM technical support for a[...]

CMUN02236E SOURCE Unable to create or modify logical subsystem: invalid format Explanation A logical subsystem identifier must be 2 hexadecimal characters. Action Specify a 2 hexadecimal character logical subsystem ID, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02237E SOURCE Unable to crea[...]

CMUN02240E SOURCE Unable to create logical volume: invalid volume type Explanation The specification contains an invalid volume type. Action Specify a valid logical volume type, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02241E SOURCE Service intent is not currently set. Reset ignored. Exp[...]

Action Contact IBM technical support for assistance. CMUN02245E SOURCE Unable to create extent pool: invalid extent limit enabled value Explanation The specification contains an invalid parameter value. The value for extent limit enabled is neither true nor false. Action Correct the specification, and then resubmit the task. If the problem persists[...]

CMUN02249E SOURCE Unable to create extent pool: invalid extent type Explanation The specification contains an invalid extent type. Action Specify a valid extent type, and then resubmit the task. CMUN02250E SOURCE Unable to create or modify extent pool: invalid user name Explanation The specification contains a user name that exceeds the 16-characte[...]

CMUN02253E SOURCE Unable to start or end service: invalid storage management console ID Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02254E SOURCE Unable to create or modify logical volume: invalid user name Explanation The specified user na[...]

Action Specify a valid identifier for the logical subsystem, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02258E SOURCE Unable to delete extent pool: ranks are assigned Explanation Ranks are assigned to the extent pool. The extent pool cannot be deleted while ranks are assigned to it. Action[...]

CMUN02262E SOURCE Unable to create volumes: invalid volume type Explanation The specification contains an invalid volume type. The following volume types are supported, but you might be limited to a subset of these by other factors in your storage definition: CKD base: v 3380 cylinder v 3390 cylinder CKD single-CU alias Fixed block base: v 512-byte[...]

CMUN02265E SOURCE Logical volume operation failure: not supported Explanation The requested operation is not supported. This might be because the specified logical volume is an alias. Action Specify a base logical volume, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02266E SOURCE Unable to m[...]

CMUN02269E SOURCE Unable to modify logical subsystem: identifier only for CKD Explanation The specified subsystem identifier is reserved for count-key-data type logical subsystems. The specified logical subsystem is fixed block and cannot be modified in this manner . Action Specify a a CKD logical subsystem, and then resubmit the task. If the probl[...]

CMUN02273E SOURCE Unable to modify SCSI host port Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02274E SOURCE Unable to delete SCSI host port Explanation The storage management console server reports a storage unit microcode-level error . Act[...]

Action Create a logical subsystem, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02278E SOURCE Operation failure: name is not unique Explanation The specification contains a name that is already being used. Action Specify a unique name, and then resubmit the task. If the problem persists, con[...]

CMUN02282E SOURCE Unable to create CKD logical volume: CKD volumes require a CKD logical subsystem. Explanation Yo u must create a count-key-data type logical subsystem before you can create count-key-data type volumes. Action Create a CKD logical subsystem, and then resubmit the task. If the problem persists, contact IBM technical support for assi[...]

CMUN02286E SOURCE Rank operation failure: extent pool does not exist. Explanation The specification contains a reference to a nonexistent extent pool. Action Specify an existing extent pool, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02287E SOURCE Rank operation failure: rank does not exis[...]

Action Specify an existing extent pool, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02291E SOURCE Unable to start service: device adapter pair is configuring. Explanation Service intent cannot be set while a device on the adapter pair is still configuring. Action W ait until the device conf[...]

Action Contact IBM technical support for assistance. CMUN02296E SOURCE Unable to delete logical volume Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02297E SOURCE Unable to create logical volume: FB volumes must have a data type. Explanation [...]

Action Specify a requested capacity , and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02300E SOURCE Rank operation failure Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02301E SOURCE Rank[...]

Action Contact IBM technical support for assistance. CMUN02305E SOURCE Operation failure: SCSI host port already exists. Explanation The specified SCSI host port already exists. Action Specify a new SCSI host port, and then resubmit the task. CMUN02306E SOURCE Unable to create, modify, or delete logical volume: service intent is set on extent pool.[...]

CMUN02309E SOURCE Unable to modify logical volume: volume type and data type mismatch Explanation A fixed block type logical volume must have a fixed block data type. A count-key-data type logical volume must have a count-key-data data type. Action Specify a valid data type for the logical volume, and then resubmit the task. CMUN02310E SOURCE Unabl[...]

CMUN02314E SOURCE Unable to modify logical volume Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02315E SOURCE Unable to modify logical subsystem Explanation The storage management console server reports a storage unit microcode-level error . [...]

Action Specify one array , and then resubmit the task. CMUN02319E SOURCE Unable to repair array Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02320E SOURCE Unable to create rank: Service intent is set on the array. Explanation An array requir[...]

CMUN02323E SOURCE Unable to assign rank to extent pool: Service intent is set on the storage complex. Explanation The storage complex has been flagged to be serviced. No activities can be performed on objects in the storage complex while the service flag is set. Action W ait until service is completed on the storage complex, and then resubmit the t[...]

CMUN02327E SOURCE Unable to reserve rank: Service intent is set. Explanation The rank has been flagged to be serviced. No activities can be performed on the rank while the service flag is set. Action W ait until service is completed on the rank, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN0[...]

Action Contact IBM technical support for assistance. CMUN02332E SOURCE Unable to delete rank Explanation The storage management console server reports a storage unit device adapter error . Action Contact IBM technical support for assistance. CMUN02333E SOURCE Unable to delete rank: Service intent is set. Explanation The rank has been flagged to be [...]

Fixed block base: v 512-byte block v 520-byte block unprotected v 520-byte block protected Action Specify a valid volume type, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02336E SOURCE Unable to rebuild array Explanation The storage management console server reports a storage unit microcode[...]

deletion failed, successive deletions in the list have stopped. Action Contact IBM technical support for assistance. CMUN02340E SOURCE Array site operation failure: The array site is used in another array. Explanation The specified array site is used in other array . Action Specify an unused array site, and then resubmit the task. If the problem pe[...]

CMUN02344E SOURCE Unable to delete logical subsystem: local server offline Explanation The storage management console server reports a storage unit microcode-level error . A local server is not online. Microcode initialization might not have completed, or a failover has occurred and one server has not yet restarted. Action Monitor system status, an[...]

CMUN02348E SOURCE Operation failure: logical subsystem not in correct state Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02349E SOURCE Unable to modify logical volume: incorrect state Explanation The storage management console server reports[...]

Action Contact IBM technical support for assistance. CMUN02353E SOURCE Operation failure Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02354E SOURCE Operation failure Explanation The storage management console server reports a storage unit mi[...]

CMUN02357E SOURCE Unable to create SCSI host port: invalid user host name Explanation The SCSI host port specification contains an invalid user host name. The SCSI host port cannot be created. Action Correct the specification, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN02358E SOURCE Unable[...]

CMUN02361E SOURCE Unable to modify volume group: invalid user name Explanation The volume group cannot be modified because the user name that is provided is invalid. Action Use a valid user name with appropriate permissions, and then resubmit the task. CMUN02362E SOURCE Unable to query volume groups: incorrect volume configuration Explanation The s[...]

Action Contact IBM technical support for assistance. CMUN02366E SOURCE Volume group operation failure: local server offline Explanation The storage management console server reports a storage unit microcode-level error . A local server is not online. Microcode initialization might not have completed, or a failover has occurred and one server has no[...]

CMUN02370E SOURCE Volume group operation failure: incorrect volume configuration Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02371E SOURCE Volume group operation failure: invalid parameter Explanation The storage management console server r[...]

Action Contact IBM technical support for assistance. CMUN02375E SOURCE Volume group operation failure Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02376E SOURCE Unable to modify logical volume: invalid data type Explanation The logical volum[...]

CMUN02379E SOURCE Error: A volume of this type cannot have a base logical volume number. Explanation A base logical volume number is specified for a volume type that does not support the specification of base logical volumes. Action Correct the specification, and then resubmit the task. CMUN02380E SOURCE Unable to create array. Array sites must be [...]

Action Contact IBM technical support for assistance. CMUN02384E SOURCE Operation failure: invalid file type Explanation The storage management console server reports a storage unit microcode-level error . A configuation file is not the correct file type. Action Contact IBM technical support for assistance. CMUN02385E SOURCE Unable to modify network[...]

CMUN02388E Invalid logical volume size. See the help text for this message for valid sizes. Explanation The specified volume size is not supported on all platforms. Supported logical volume sizes are microcode level dependent. For DS microcode levels 5.0.3 and above: v Supported Enterprise Storage System (ESS) logical volume sizes range from 0.1 to[...]

20.9 (19.5) 21.0 (19.6) 21.5 (20.0) 21.6 (20.1) 21.7 (20.2) 21.8 (20.3) 22.3 (20.8) 22.4 (20.9) 22.5 (21.0) 22.6 (21.0) 22.7 (21.1) 23.2 (21.6) 23.3 (21.7) 23.4 (21.8) 23.5 (21.9) 24.0 (22.4) 24.1 (22.4) 24.2 (22.5) 24.3 (22.6) 24.8 (23.1) 24.9 (23.2) 25.0 (23.3) 25.1 (23.4) 25.6 (23.8) 25.7 (23.9) 25.8 (24.0) 25.9 (24.1) 26.0 (24.2) 26.5 (24.7) 26[...]

74.5 (69.4) 74.6 (69.5) 74.7 (69.6) 75.2 (70.0) 75.3 (70.1) 75.4 (70.2) 75.5 (70.3) 76.0 (70.8) 76.1 (70.9) 76.2 (71.0) 76.3 (71.1) 76.8 (71.5) 76.9 (71.6) 77.0 (71.7) 77.1 (71.8) 77.2 (71.9) 77.7 (72.4) 77.8 (72.5) 77.9 (72.6) 78.0 (72.6) 78.5 (73.1) 78.6 (73.2) 78.7 (73.3) 78.8 (73.4) 79.3 (73.9) 79.4 (73.9) 79.5 (74.0) 79.6 (74.1) 80.1 (74.6) 80[...]

128.1 (119.3) 128.2 (119.4) 128.3 (119.5) 128.4 (119.6) 128.9 (120.0) 129.0 (120.1) 129.1 (120.2) 129.2 (120.3) 129.7 (120.8) 129.8 (120.9) 129.9 (121.0) 130.0 (121.1) 130.5 (121.5) 130.6 (121.6) 130.7 (121.7) 130.8 (121.8) 131.3 (122.3) 131.4 (122.4) 131.5 (122.5) 131.6 (122.6) 131.7 (122.7) 132.2 (123.1) 132.3 (123.2) 132.4 (123.3) 132.5 (123.4) [...]

181.7 (169.2) 181.8 (169.3) 181.9 (169.4) 182.0 (169.5) 182.5 (170.0) 182.6 (170.1) 182.7 (170.2) 182.8 (170.2) 182.9 (170.3) 183.4 (170.8) 183.5 (170.9) 183.6 (171.0) 183.7 (171.1) 184.2 (171.5) 184.3 (171.6) 184.4 (171.7) 184.5 (171.8) 185.0 (172.3) 185.1 (172.4) 185.2 (172.5) 185.3 (172.6) 185.9 (173.1) 186.0 (173.2) 186.1 (173.3) 186.2 (173.4) [...]

234.9 (218.8) 235.4 (219.2) 235.5 (219.3) 235.6 (219.4) 235.7 (219.5) 236.2 (220.0) 236.3 (220.1) 236.4 (220.2) 236.5 (220.3) 237.1 (220.8) 237.2 (220.9) 237.3 (221.0) 237.4 (221.1) 237.9 (221.6) 238.0 (221.7) 238.1 (221.7) 238.2 (221.8) 238.7 (222.3) 238.8 (222.4) 238.9 (222.5) 239.0 (222.6) 239.5 (223.1) 239.6 (223.1) 239.7 (223.2) 239.8 (223.3) [...]

288.6 (268.8) 289.1 (269.2) 289.2 (269.3) 289.3 (269.4) 289.4 (269.5) 289.9 (270.0) 290.0 (270.1) 290.1 (270.2) 290.2 (270.3) 290.7 (270.7) 290.8 (270.8) 290.9 (270.9) 291.0 (271.0) 291.6 (271.6) 291.7 (271.7) 291.8 (271.8) 291.9 (271.9) 292.4 (272.3) 292.5 (272.4) 292.6 (272.5) 292.7 (272.6) 293.2 (273.1) 293.3 (273.2) 293.4 (273.3) 293.5 (273.3) [...]

342.2 (318.7) 342.8 (319.3) 342.9 (319.4) 343.0 (319.4) 343.1 (319.5) 343.6 (320.0) 343.7 (320.1) 343.8 (320.2) 343.9 (320.3) 344.4 (320.7) 344.5 (320.8) 344.6 (320.9) 344.7 (321.0) 345.2 (321.5) 345.3 (321.6) 345.4 (321.7) 345.5 (321.8) 346.1 (322.3) 346.2 (322.4) 346.3 (322.5) 346.4 (322.6) 346.9 (323.1) 347.0 (323.2) 347.1 (323.3) 347.2 (323.4) [...]

395.9 (368.7) 396.4 (369.2) 396.5 (369.3) 396.6 (369.4) 396.7 (369.5) 397.3 (370.0) 397.4 (370.1) 397.5 (370.2) 397.6 (370.3) 398.1 (370.8) 398.2 (370.9) 398.3 (370.9) 398.4 (371.0) 398.9 (371.5) 399.0 (371.6) 399.1 (371.7) 399.2 (371.8) 399.7 (372.2) 399.8 (372.3) 399.9 (372.4) 400.0 (372.5) 400.6 (373.1) 400.7 (373.2) 400.8 (373.3) 400.9 (373.4) [...]

449.6 (418.7) 450.1 (419.2) 450.2 (419.3) 450.3 (419.4) 450.4 (419.5) 450.9 (419.9) 451.0 (420.0) 451.1 (420.1) 451.2 (420.2) 451.8 (420.8) 451.9 (420.9) 452.0 (421.0) 452.1 (421.1) 452.6 (421.5) 452.7 (421.6) 452.8 (421.7) 452.9 (421.8) 453.4 (422.3) 453.5 (422.4) 453.6 (422.4) 453.7 (422.5) 454.2 (423.0) 454.3 (423.1) 454.4 (423.2) 454.5 (423.3) [...]

503.3 (468.7) 503.8 (469.2) 503.9 (469.3) 504.0 (469.4) 504.1 (469.5) 504.6 (469.9) 504.7 (470.0) 504.8 (470.1) 504.9 (470.2) 505.4 (470.7) 505.5 (470.8) 505.6 (470.9) 505.7 (471.0) 505.8 (471.1) 506.3 (471.5) 506.4 (471.6) 506.5 (471.7) 506.6 (471.8) 507.1 (472.3) 507.2 (472.4) 507.3 (472.5) 507.4 (472.6) 507.9 (473.0) 508.0 (473.1) 508.1 (473.2) [...]

556.9 (518.7) 557.0 (518.7) 557.5 (519.2) 557.6 (519.3) 557.7 (519.4) 557.8 (519.5) 558.3 (520.0) 558.4 (520.1) 558.5 (520.1) 558.6 (520.2) 559.1 (520.7) 559.2 (520.8) 559.3 (520.9) 559.4 (521.0) 559.9 (521.4) 560.0 (521.5) 560.1 (521.6) 560.2 (521.7) 560.3 (521.8) 560.8 (522.3) 560.9 (522.4) 561.0 (522.5) 561.1 (522.6) 561.6 (523.0) 561.7 (523.1) [...]

610.5 (568.6) 610.6 (568.7) 611.1 (569.1) 611.2 (569.2) 611.3 (569.3) 611.4 (569.4) 611.5 (569.5) 612.0 (570.0) 612.1 (570.1) 612.2 (570.2) 612.3 (570.2) 612.8 (570.7) 612.9 (570.8) 613.0 (570.9) 613.1 (571.0) 613.6 (571.5) 613.7 (571.6) 613.8 (571.6) 613.9 (571.7) 614.4 (572.2) 614.5 (572.3) 614.6 (572.4) 614.7 (572.5) 614.8 (572.6) 615.3 (573.0) [...]

664.1 (618.5) 664.2 (618.6) 664.3 (618.7) 664.8 (619.1) 664.9 (619.2) 665.0 (619.3) 665.1 (619.4) 665.6 (619.9) 665.7 (620.0) 665.8 (620.1) 665.9 (620.2) 666.0 (620.3) 666.5 (620.7) 666.6 (620.8) 666.7 (620.9) 666.8 (621.0) 667.3 (621.5) 667.4 (621.6) 667.5 (621.7) 667.6 (621.8) 668.1 (622.2) 668.2 (622.3) 668.3 (622.4) 668.4 (622.5) 668.9 (623.0) [...]

717.7 (668.4) 717.8 (668.5) 717.9 (668.6) 718.0 (668.7) 718.5 (669.2) 718.6 (669.2) 718.7 (669.3) 718.8 (669.4) 719.3 (669.9) 719.4 (670.0) 719.5 (670.1) 719.6 (670.2) 720.1 (670.6) 720.2 (670.7) 720.3 (670.8) 720.4 (670.9) 720.5 (671.0) 721.0 (671.5) 721.1 (671.6) 721.2 (671.7) 721.3 (671.8) 721.8 (672.2) 721.9 (672.3) 722.0 (672.4) 722.1 (672.5) [...]

771.3 (718.3) 771.4 (718.4) 771.5 (718.5) 771.6 (718.6) 771.7 (718.7) 772.2 (719.2) 772.3 (719.3) 772.4 (719.4) 772.5 (719.4) 773.0 (719.9) 773.1 (720.0) 773.2 (720.1) 773.3 (720.2) 773.8 (720.7) 773.9 (720.8) 774.0 (720.8) 774.1 (720.9) 774.7 (721.5) 774.8 (721.6) 774.9 (721.7) 775.0 (721.8) 775.5 (722.2) 775.6 (722.3) 775.7 (722.4) 775.8 (722.5) [...]

824.5 (767.9) 825.0 (768.3) 825.1 (768.4) 825.2 (768.5) 825.3 (768.6) 825.9 (769.2) 826.0 (769.3) 826.1 (769.4) 826.2 (769.5) 826.7 (769.9) 826.8 (770.0) 826.9 (770.1) 827.0 (770.2) 827.5 (770.7) 827.6 (770.8) 827.7 (770.9) 827.8 (770.9) 828.3 (771.4) 828.4 (771.5) 828.5 (771.6) 828.6 (771.7) 829.2 (772.3) 829.3 (772.3) 829.4 (772.4) 829.5 (772.5) [...]

878.2 (817.9) 878.7 (818.4) 878.8 (818.4) 878.9 (818.5) 879.0 (818.6) 879.5 (819.1) 879.6 (819.2) 879.7 (819.3) 879.8 (819.4) 880.4 (819.9) 880.5 (820.0) 880.6 (820.1) 880.7 (820.2) 881.2 (820.7) 881.3 (820.8) 881.4 (820.9) 881.5 (821.0) 882.0 (821.4) 882.1 (821.5) 882.2 (821.6) 882.3 (821.7) 882.8 (822.2) 882.9 (822.3) 883.0 (822.4) 883.1 (822.5) [...]

931.9 (867.9) 932.4 (868.4) 932.5 (868.5) 932.6 (868.6) 932.7 (868.6) 933.2 (869.1) 933.3 (869.2) 933.4 (869.3) 933.5 (869.4) 934.0 (869.9) 934.1 (869.9) 934.2 (870.0) 934.3 (870.1) 934.9 (870.7) 935.0 (870.8) 935.1 (870.9) 935.2 (871.0) 935.7 (871.4) 935.8 (871.5) 935.9 (871.6) 936.0 (871.7) 936.5 (872.2) 936.6 (872.3) 936.7 (872.4) 936.8 (872.5) [...]

Action Specify a valid volume size and then resubmit the task. CMUN02389E SOURCE Unable to create volume. Not enough extents are available. Explanation The volume cannot be created because not enough extents are available in the extent pool. More extents must be added to the extent pool. Action Add more extents to the extent pool, and then resubmit[...]

CMUN02393E SOURCE Unable to create or modify CKD alias volume. The base and alias volumes belong to different logical subsystems. Explanation The base and its alias volumes must belong to the same logical subsystem. Action Specify base and alias volumes that belong to the same logical subsystem, and then resubmit the task. CMUN02394E SOURCE Unable [...]

CMUN02397E SOURCE Unable to delete volume: The volume does not exist. Explanation The specified volume cannot be found. Therefore, it cannot be deleted. Action Specify a different volume to delete. CMUN02398E SOURCE Unable to create array. All array sites must be in the same loop. Explanation The specified array sites are not in the same adapter lo[...]

Action Contact IBM technical support for assistance. CMUN02402E SOURCE Unable to create rank: failed disk drives detected Explanation The specified storage includes failed disk drives. These drives must be replaced before a rank can be created on them. Action Specify a different array , or ensure that the failed disk drives are replaced. Then resub[...]

CMUN02406E SOURCE Internal logical configuration error: Collect a PE package. Explanation The storage management console server reports a storage unit microcode-level error . Action Collect a PE package and contact IBM technical support for assistance. CMUN02407E SOURCE Array operation failure: Resource Manager not available on alternate server Exp[...]

CMUN02410E SOURCE Extent pool operation failure: Resource Manager not available on alternate server Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN0241 1E SOURCE Logical volume operation failure: Resource Manager not available on alternate ser[...]

CMUN02414E SOURCE Unable to create SCSI host port. A colon ″ : ″ cannot be used when specifying a SCSI host port. Explanation A colon ″ : ″ is used in a SCSI host port specification. This character cannot be used in a SCSI host port specification. Action Omit the colon, and then resubmit the task. CMUN02415E SOURCE Unable to modify SCSI hos[...]

Action Contact IBM technical support for assistance. CMUN02419E SOURCE Rank repair operation failure: Service intent flag is set. Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02420E SOURCE Rank repair operation failure Explanation The storag[...]

CMUN02423E SOURCE Rank repair operation failure: device adapter error Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN02424E SOURCE Rank repair operation failure: Multiple ranks exist or the rank is still accessible. Explanation The storage man[...]

CMUN02427E SOURCE Internal logical configuration error: Another configuration is in progress. Explanation The storage management console server reports a storage unit microcode-level error . Another configuration process is in progress. Y our task cannot be performed at this time. Action W ait, and then resubmit the task. If the problem persists, c[...]

CMUN02431E SOURCE Invalid configuration: A volume group cannot contain unconfigured logical volumes. Explanation A volume group cannot contain an unconfigured volume. One or more of the specified volumes is not in the configured state. Action Specify only configured volumes, and then resubmit the task. CMUN02432E SOURCE Invalid configuration: volum[...]

CMUN02435E SOURCE Invalid configuration: volume group and volume type mismatch Explanation A SCSI (not mixed) volume group must contain only logical volumes of type 512-byte fixed-block. Action Specify only 512-byte fixed-block logical volumes, and then resubmit the task. CMUN02436E SOURCE Invalid configuration: volume group and volume type mismatc[...]

CMUN02439E SOURCE Unable to create rank. DDM repair is required or in progress. Explanation The rank cannot be created because disk drive repair is required or is in progress. Action W ait until the drives have been repaired, and then resubmit the task. CMUN03000E SOURCE Operation failure: action cancelled due to lack of resources Explanation The s[...]

Action W ait until the first process completes, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN03004E SOURCE Copy Services operation failure: Global Mirror command not properly defined Explanation The storage management console server reports a Copy Services error . Action Contact IBM technica[...]

CMUN03008E SOURCE Copy Services operation failure: cascading FlashCopy prohibited Explanation A FlashCopy target cannot be a FlashCopy source or the target of another relationship. Action Specify a logical volume that is not a FlashCopy target, and then resubmit the task. Contact IBM technical support for assistance. CMUN03009E SOURCE Copy Services[...]

CMUN03012E SOURCE Remote Mirror and Copy operation failure Explanation The storage management console server reports a Remote Mirror and Copy error . One of the following conditions is occurring: v Abnormal conditions exist at the secondary controller . v Abnormal conditions exist at the secondary storage unit. v The communication paths between the[...]

CMUN03016E SOURCE Copy Services feature not installed Explanation The Copy Services feature is not installed on the storage unit. Action Contact IBM technical support for assistance. CMUN03017E SOURCE Copy Services feature not supported. Explanation The storage unit does not support the requested Copy Services feature. Action Contact IBM technical [...]

Action Ensure that a configured logical volume exists, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN03021E SOURCE Copy Services operation failure: device status cannot be determined Explanation A logical volume in the specification is either: v Unconfigured v Flagged for service v In the sta[...]

CMUN03024E SOURCE Copy Services operation failure: ESCON - FCP remove collision Explanation An attempt is being made to remove ESCON paths between two control units with FCP paths that also exist between the control units, or an attempt is being made to remove FCP paths between two control units with ESCON paths that also exist between the control [...]

v A start or resume Global Mirror command with no modify options is being issued to a storage image on which a master process is running. v A start or resume Global Mirror command with modify options is being issued, but the parameters do not match the existing configuration. v A start or resume Global Mirror command with modify options is being is[...]

CMUN03032E SOURCE Operation failure: invalid failover secondary volume Explanation The failover action fails because the volume is not a full duplex Metro Mirror secondary volume. Action Ensure that the secondary volume is in full duplex mode, and then resubmit the task. CMUN03033E SOURCE Copy Services operation failure: FCP - FICON path collision [...]

CMUN03036E SOURCE Copy Services operation failure: maximum FlashCopy relationships exceeded or initialization in progress Explanation The requested FlashCopy Relationship cannot be established because the maximum number of relationships already are established or because the volume was recently created and is still being initialized to support Flas[...]

CMUN03040E SOURCE Copy Services operation failure: maximum relationships exceeded Explanation The maximum number of FlashCopy relationships has been established for this volume. No more relationships can be created. Action Remove any unwanted relationships, and then resubmit the task. CMUN03041E SOURCE Copy Services operation failure: already a Fla[...]

Action Specify a different conduit logical subsystem or establish a path, and then resubmit the task. CMUN03045E SOURCE Copy Services operation failure: increment failed due to internal error Explanation The relationship cannot be incremented due to an internal error . Action Contact IBM technical support for assistance. CMUN03046E SOURCE Copy Serv[...]

CMUN03049E SOURCE Copy Services operation failure: incompatible volumes Explanation FlashCopy volumes must be the same capacity , and they must belong to the same logical subsystem. Action Specify volumes that are the same capacity and are on the same logical subsystem, and then resubmit the task. CMUN03050E SOURCE Copy Services operation failure: [...]

CMUN03053E SOURCE Copy Services operation failure: invalid transition Explanation The command attempts to perform an invalid transition between modes. Action Contact IBM technical support for assistance. CMUN03054E SOURCE Copy Services operation failure: invalid revertible specification Explanation Either: v A FlashCopy establish was specified with[...]

CMUN03057E SOURCE Copy Services operation failure: invalid subsystem ID Explanation The specified subsystem ID cannot be found. Action Specify an valid subsystem ID, and then resubmit the task. CMUN03058E SOURCE Copy Services Operation failure: invalid WWNN Explanation The primary or secondary worldwide node name is invalid. Action Specify a valid [...]

CMUN03062E SOURCE Copy Services operation failure: maximum masters exceeded Explanation A start or resume Global Mirror command was received by a subordinate that already has the maximum number (32) of masters. Action Contact IBM technical support for assistance. CMUN03063E SOURCE Copy Services operation failure: sequence number and session ID mism[...]

CMUN03066E SOURCE Copy Services operation failure: no volume zero on secondary logical subsystem Explanation The storage management console server reports a Copy Services error . Action Contact IBM technical support for assistance. CMUN03067E SOURCE Copy Services operation failure: configuration does not exist Explanation The specified configuratio[...]

Action Remove the Remote Mirror and Copy pairs, and then resubmit the task. CMUN03071E SOURCE Copy Services operation failure: invalid parameter Explanation The storage management console server reports a Copy Services error . Action Contact IBM technical support for assistance. CMUN03072E SOURCE Copy Services operation failure: invalid track Expla[...]

CMUN03075E SOURCE Copy Services operation failure: path timeout Explanation The storage management console server reports a Copy Services error . Communication to the secondary timed out. Action Contact IBM technical support for assistance. CMUN03076E SOURCE Operation failure: path type mismatch Explanation ESCON and FCP paths cannot be established[...]

CMUN03079E SOURCE Copy Services operation failure: copy pending Explanation The attempt to suspend a volume fails because the pair is still copy pending. The volume cannot be suspended because data changes are not consistent between the source and target volumes. Action Contact IBM technical support for assistance. CMUN03080E SOURCE Copy Services: [...]

CMUN03083E SOURCE Copy Services operation failure: preexisting Remote Mirror and Copy pair Explanation The storage management console server reports a Copy Services error . The action conflicts with an existing Remote Mirror and Copy pair that is established on the logical volumes. Action Contact IBM technical support for assistance. CMUN03084E SOU[...]

CMUN03087E SOURCE Copy Services operation failure: reverse bitmap non-zero Explanation The storage management console server reports a Copy Services error . The target volume bitmap is not all zeros. Action Contact IBM technical support for assistance. CMUN03088E SOURCE Copy Services operation failure: secondary error Explanation The storage manage[...]

CMUN03091E SOURCE Copy Services operation failure: session members not defined Explanation The storage management console server reports a Copy Services error . The submitted session members are not defined. Action Specify valid logical volumes for the session members, and then resubmit the task. CMUN03092E SOURCE Copy Services operation failure: s[...]

CMUN03095E SOURCE Copy Services operation failure: subordinate count out of range Explanation The storage management console server reports a Copy Services error . The specified subordinate count is out of range. The subordinate count must be between 0 and 16 inclusive. Action Contact IBM technical support for assistance. CMUN03096E SOURCE Copy Ser[...]

CMUN03100E SOURCE Copy Services operation failure: volume in session Explanation The specified volume is already associated with a session. Action Specify a different volume, and then resubmit the task. CMUN03101E SOURCE Copy Services operation failure: volume in use Explanation The storage management console server reports a Copy Services error . [...]

Action Specify compatible volumes, and then resubmit the task. CMUN03105E SOURCE Copy Services operation failure: volume not restorable Explanation The volume is not in a persistent FlashCopy relationship with a completed background copy . Action Contact IBM technical support for assistance. CMUN03106E SOURCE Copy Services operation failure: volume[...]

CMUN03109E SOURCE Copy Services operation failure: volumes not simplex Explanation Both the source and target volumes must be in the simplex state before you can establish a relationship pair . Action Place both the source and target volumes in the simplex state, and then resubmit the task. CMUN031 10E SOURCE Copy Services operation failure: warm s[...]

CMUN031 13E SOURCE Operation failure: CKD base required Explanation A count-key-data base device is required for this operation. A count-key-data alias is specified. Action Specify a CKD base device, and then resubmit the task. CMUN031 14E SOURCE Unable to establish FlashCopy with fast reverse restore: previous FRR Explanation A FlashCopy with fast[...]

Action W ait until initialization completes, and then resubmit the task. CMUN031 18E SOURCE Copy Services error: Intervention is required. Explanation One of the following conditions exists: v The addressed device is in CE mode. v The addressed device is not ready . v The volume configuration of the addressed device is incorrect. Action Ensure that[...]

CMUN04002E SOURCE Operation failure: internal error Explanation The storage management console server reports a storage unit microcode-level error . Action Contact IBM technical support for assistance. CMUN04003E SOURCE Operation failure: internal error Explanation The storage management console server reports an internal error . Action Contact IBM[...]

CMUN04007E SOURCE Operation failure: resource not found Explanation The storage management console server reports an internal error . Action Contact IBM technical support for assistance. CMUN04008E SOURCE Operation failure Explanation The storage management console server reports an internal error . Action Contact IBM technical support for assistan[...]

CMUN05002E SOURCE Operation failure: duplicate user name in local repository Explanation The storage management console server reports an internal security error . Action Contact IBM technical support for assistance. CMUN05003E SOURCE Operation failure: alternate communication failure Explanation The storage management console server reports an int[...]

CMUN05007E SOURCE Operation failure: local busy Explanation The storage management console server reports a storage unit microcode-level error . The local repository is being updated and is not available. Action W ait, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN05008E SOURCE Operation fail[...]

The minimum number of unique new passwords that must be used before an old password can be reused is four . Action Specify a valid password, and then resubmit the task. CMUN05013E SOURCE Operation failure: password same as previous password Explanation A user account password cannot be used again. Action Specify a password that has not been used pr[...]

CMUN05017E SOURCE Operation failure: internal error in alternate repository Explanation The storage management console server reports an internal security error . Action Contact IBM technical support for assistance. CMUN05018E SOURCE Operation failure: internal error in local repository Explanation The storage management console server reports an i[...]

Action Specify a valid user name, and then resubmit the task. If the problem persists, contact IBM technical support for assistance. CMUN05022E SOURCE Operation failure: user not found in local repository Explanation The specified user name cannot be found in the local repository . Action Specify a valid user name, and then resubmit the task. If th[...]

CMUN06003E SOURCE Operation failure: unable to copy PE package Explanation The storage management console server reports an internal service advisor error . Action Contact IBM technical support for assistance. CMUN06004E SOURCE Operation failure: unable to copy SA logs to the PE package Explanation The storage management console server reports an i[...]

CMUN06008E SOURCE Operation failure: console server exception returned to SA Explanation The storage management console server reports an internal service advisor error . Action Contact IBM technical support for assistance. CMUN06009E SOURCE Operation failure: unable to retrieve list of field-replacable units Explanation The storage management cons[...]

CMUN06013E SOURCE Operation failure: unable to retrieve software version Explanation The storage management console server reports an internal service advisor error . Action Contact IBM technical support for assistance. CMUN06014E SOURCE Operation failure: unable to retrieve trace service Explanation The storage management console server reports an[...]

Action 1. Ensure that all the files in directory %MR1750_SM_HOME%send2IBM are valid and can be transferred by FTP . 2. Ensure that network connectivity and firewall access is available. 3. Attempt to resend the data again. 4. If the problem persists, contact IBM technical support for assistance. CMUN06018E SOURCE Unable to activate code load: inco[...]

v This command can be run from the storage management console only . Action 1. Submit the command from the storage management console with administrator authority . 2. If the problem persists, then re-install the storage management console server software. 3. If the problem still persists, contact IBM technical support for assistance. CMUN06022E SO[...]

CMUN06026E SOURCE Operation failure: an external utility does not run Explanation The utility might not run for one of the following reasons: v The utility invoked by the service advisor does not exist or the utility has been moved. v Yo u are not invoking the utility from the storage management console. v The storage management console server soft[...]

Action Install the storage management console server on a supported operating system. If the problem persists, contact IBM technical support for assistance. CMUN06030E SOURCE Operation failure: environment variable not found Explanation The service advisor relies on environment variables that are initialized when the storage management console serv[...]

Action Check network traffic to determine if unusual workloads exist. Check for network adapter hardware errors, configuration changes, or address changes. Resubmit the task. If the problem persists, contact IBM technical support. CMUN80002E The client code is not at the same version level as the storage management console server code. Explanation [...]

CMUN80006E The information for this resource cannot be retrieved. Explanation The query for information on extent usage for the resource cannot run. No specific information about the cause of the failure is available. Action Ensure that the correct version of software has been installed. Resubmit the task. If the problem persists, contact IBM techn[...]

Action Contact your system administrator to change your authorization level. Resubmit the task. CMUN8001 1E The connection cannot be made because authentication information is invalid. Explanation The authentication information is invalid. Action Ensure that correct authentication information is entered. Resubmit the task. CMUN80012E The IP address[...]

CMUN80015E Resource not found Explanation The storage management console server cannot find the specified resource. Action Ensure that the resource is configured on the storage complex and is specified correctly in the task. Resubmit the task. CMUN80016E The storage management console server reports an internal error. Explanation The storage manage[...]

CMUN80019E SOURCE Authentication failure: The security database is not accessible. Explanation The storage management console server reports an authentication failure. The security database is not accessible. Action Contact IBM technical support for assistance. CMUN80020E SOURCE Authentication failure: invalid password Explanation The storage manag[...]

CMUN80023E SOURCE Authentication failure: Nonexistent account. Explanation The storage management console server reports an authentication failure. The specified user account does not exist. Action Ask your system administrator to create this account and ensure that it is registered in the security database, or log in using a different user name. C[...]

Accessibility Accessibility features provide users who have disabilities with the ability to successfully access information and use technology . Accessibility features help a user who has a physical disability , such as restricted mobility or limited vision, to use software products successfully . Features These are the major accessibility feature[...]

318 IBM T otalStorage DS8000: Messages Reference[...]

Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or [...]

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM produc[...]

By downloading or printing information from this site, you have indicated your agreement with these terms and conditions. T rademarks The following terms are trademarks of the International Business Machines Corporation in the United States, other countries, or both: v AIX v DB2 v DFSMS/MVS v DFSMS/VM v e (logo) v Enterprise Storage Server v ES/900[...]

UNIX is a registered trademark of The Open Group in the United States and other countries. Linux is a trademark of Linus T orvalds in the United States, other countries, or both. Other company , product, and service names may be trademarks or service marks of others. Electronic emission notices This section contains the electronic emission notices [...]

Der Aussteller der Konformitaetserklaeung ist die IBM Deutschland. Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2: Das Geraet erfuellt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse A. EN 55022 Klasse A Geraete beduerfen folgender Hinweise: Nach dem EMVG: "Geraete duerfen an Orten, fuer die sie nicht ausreichend entstoert s[...]

T aiwan class A compliance statement VS07171L 324 IBM T otalStorage DS8000: Messages Reference[...]

Glossary This glossary includes terms for the IBM T otalStorage and other Resiliency Family products. This glossary includes selected terms and definitions from: v The American National Standard Dictionary for Information Systems , ANSI X3.172–1990, copyright 1990 by the American National Standards Institute (ANSI), 11 West 42nd Street, New Y ork[...]

A access 1) To obtain the use of a computer resource. 2) In computer security , a specific type of interaction between a subject and an object that results in flow of information from one to the other . access-any mode One of the two access modes that can be set for the storage unit during initial configuration. It enables all fibre-channel-attache[...]

availability The degree to which a system or resource is capable of performing its normal function. See data availability . B bay The physical space that is used for installing SCSI, ESCON, and fibre-channel host adapter cards. The DS8000 has four bays, two in each cluster . See also service boundary . bit 1) Either of the digits 0 or 1 when used i[...]

channel command retry (CCR) For zSeries, the protocol used between a channel and a control unit that enables the control unit to request that the channel reissue the current command. channel command word (CCW) For zSeries, a data structure that specifies an I/O operation to the channel subsystem. channel path For zSeries, the interconnection betwee[...]

consistency group interval time The value in seconds that indicates the length of time between the formation of consistency groups. consistent copy A copy of a data entity (a logical volume, for example) that contains the contents of the entire data entity at a single instant in time. console A user interface to a server , for example, the interfac[...]

Copy Services server A cluster that the Copy Services administrator designates to perform the DS8000 Copy Services functions. Copy Services server group A collection of user-designated DS8000 clusters participating in Copy Services functions that a designated, active, Copy Services server manages. A Copy Services server group is also called a Copy [...]

data field The optional third field of a count key data (CKD) record. The count field specifies the length of the data field. The data field contains data that the program writes. data record The basic unit of zSeries storage on a DS8000, also known as a count-key-data (CKD) record. Data records are stored on a track. The records are sequentially n[...]

disk cage A container for disk drives. Each disk cage supports eight disk packs (64 disks). disk drive Standard term for a disk-based nonvolatile storage medium. The DS8000 uses hard disk drives as the primary nonvolatile storage media to store host data. disk drive module (DDM) A field replaceable unit that consists of a single disk drive and its [...]

EC See engineering change . ECKD See extended count key data . eight pack See disk pack . electrostatic discharge (ESD) An undesirable discharge of static electricity that can damage equipment and degrade electrical circuitry . emergency power off (EPO) A means of turning off power during an emergency , usually a switch. EMIF See ESCON multiple ima[...]

special symbols with a coded character set of 256 eight-bit codes. extended count key data (ECKD) An extension of the count key data (CKD) architecture. extent A continuous space on a disk that is occupied by or reserved for a particular data set, data space, or file. The unit of increment is a track. See also multiple allegiance and parallel acces[...]

FICON See fibre-channel connection . FiconNet In the DS Storage Manager , the label on a pseudo host icon that represents a host connection that uses the FICON protocol and that is not completely defined on the DS8000. See also pseudo host and access-any mode . field replaceable unit (FRU) An assembly that is replaced in its entirety when any one o[...]

Global Mirror An optional capability of the DS8000 remote mirror and copy feature that provides a 2-site extended distance remote copy . Data that is written by the host to the storage unit at the local site is automatically maintained at the remote site. See also Metro Mirror and Remote Mirror and Copy . group In DS8000 documentation, a nickname f[...]

as the subname of the fully qualified domain name, for example, mycomputer . See also host system . host processor A processor that controls all or part of a user application network. In a network, the processing unit in which the data communication access method resides. See also host system . host system A computer , either of the mainframe (for [...]

IBM T otalStorage Enterprise Storage Server , Models 750 and 800. image See storage image . IML See initial microcode load . implicit allegiance In Enterprise Systems Architecture/390, a relationship that a control unit creates between a device and a channel path when the device accepts a read or write operation. The control unit guarantees access [...]

iSeries An IBM e(logo)server product that emphasizes integration. It is the successor to the AS/400 family of servers. J Java Virtual Machine (JVM) A software implementation of a central processing unit (CPU) that runs compiled Java code (applets and applications). (GC) JVM See Java Virtual Machine . K KB See kilobyte . key field The second (option[...]

logical block address (LBA) The address assigned by the DS8000 to a sector of a disk. logical control unit (LCU) See control-unit image . logical data unit A unit of storage that is accessible on a given device. logical device The facilities of a storage server (such as the DS8000) associated with the processing of I/O operations directed to a sing[...]

longwave laser adapter A connector that is used between a host and the DS8000 to support longwave fibre-channel communication. loop The physical connection between a pair of device adapters in the DS8000. See also device adapter . LP AR See logical partition . LRC See longitudinal redundancy check . LRU See least recently used . LSS See logical sub[...]

megabyte (MB) 1) For processor storage, real and virtual storage, and channel volume, 2 20 or 1 048 576 bytes. 2) For disk storage capacity and communications volume, 1 000 000 bytes. Metro Mirror A function of a storage server that maintains a consistent copy of a logical volume on the same storage server or on another storage server . All modific[...]

targets by simultaneously establishing multiple FlashCopy relationships. multiple virtual storage (MVS) Implies MVS/390, MVS/XA, MVS/ESA, and the MVS element of the zSeries operating system. multiplex The action of transmitting simultaneously . multiport serial adapter (MSA) An adapter on the IBM T otalStorage Management Console that has multiple p[...]

associating multiple devices of a single control-unit image with a single logical device. Up to eight device addresses can be assigned to a PAV. The PAV function enables two or more concurrent write operations to the same logical volume, as long as the write operations are not to the same extents. See also extent , I/O Priority Queueing , and multi[...]

program On a computer , a generic term for software that controls the operation of the computer . T ypically , the program is a logical assemblage of software modules that perform multiple related tasks. program-controlled interruption An interruption that occurs when an I/O channel fetches a channel command word with the program-controlled interru[...]

redundant array of independent disks (RAID) A methodology of grouping disk drives for managing disk storage to insulate data from a failing disk drive. refresh FlashCopy target volume An option (previously called incremental FlashCopy ) of the DS8000 that creates a point-in-time data copy without copying an entire volume for each point-in-time copy[...]

device that is used in protocols on the SCSI interface to identify or select the device. The number of data bits on the SCSI bus determines the number of available SCSI IDs. A wide interface has 16 bits, with 16 possible IDs. SDD See IBM Subsystem Multipathing Device Driver . secondary control unit The DS8000 to which a Remote Mirror and Copy secon[...]

Simple Network Management Protocol (SNMP) In the Internet suite of protocols, a network management protocol that is used to monitor routers and attached networks. SNMP is an application layer protocol. Information on devices managed is defined and stored in the application’s Management Information Base (MIB). (GC) See also management information [...]

storage area network A network that connects a company’s heterogeneous storage resources. storage capacity The amount of data that a storage medium can hold; usually expressed in kilobytes, megabytes, or gigabytes. storage complex A configuration of one or more storage units that is managed by a management console. storage device A physical unit [...]

System/390 See S/390 . system adapter identification number (SAID) The unique identification number that is automatically assigned to each DS8000 host adapter for use by Copy Services. System Management Interface T ool (SMIT) An interface tool of the AIX operating system for installing, maintaining, configuring, and diagnosing tasks. System Modific[...]

protocols that provide end-to-end connections between applications over interconnected networks of different types. 2) A suite of transport and application protocols that run over the Internet Protocol. (GC) See also Internet Protocol and T ransmission Control Protocol . transparency See software transparency . TSO See time sharing option . turbo p[...]

protocol-independent manner . See also worldwide node name write hit A write operation in which the requested data is in the cache. write penalty The performance impact of a classical RAID-5 write operation. WWNN See worldwide node name . WWPN See worldwide port name . X xSeries The product name of an IBM e(logo)server product that emphasizes indus[...]

[...]

 Printed in USA GC26-7659-04[...]