IBM PCM-9575 manuel d'utilisation

i PCM-9575 EBX VIA Eden/Ezra SBC with CPU,LCD, Ethernet , Audio, PCI and PC/104-Plus Users Manual[...]

PCM-9575 User’s Manual ii Copyright This document is copyrighted, © 2002. Al l rights are reserved. The orig- inal manufacturer reserves the right to make improvements to the prod- ucts described in this manual at any time without notice. No part of this m anual may be repro duced, copied, transl ated or transmit- ted in any form or by any means[...]

iii P a c k i n g L i s t Before you beg i n install ing your car d, please make su re that the followi ng materials have been shipped: • 1 PCM-95 75 all-in-one single board comp uter • 1 CD disk for utility and driv ers • 1 startup manual • 1 Pow er cable (p/ n: 170308010 1) • 1 Mini Ju mper*10 PCS P ackage (p/n: 9 689000002) If any of t[...]

PCM-9 575 User’s Ma nual iv[...]

Table of Contents v Contents Chapter 1 General Information ........................................ 1 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Features ............. ......................... .............. ......................... 3 1.3 Specifications ............ .........................[...]

vi 2.14.2Main p o wer con nector, + 5 V, +12 V (CN 5) ..... ............... ...... 17 2.14.3CPU Fa n power supply connect or (FAN1 ) ........ ............... ...... 17 2.15 ATX power control co nnector (CN3, CN 23) .................. 17 2.15.1ATX featur e (CN3), soft power switch conn (CN23) ....... ...... 17 Figure 2.3: Wiring for ATX soft power s[...]

Tabl e of Contents vii Chapter 4 Award BIOS Setup ......................................... 33 4.1 System test and in i tialization............... ............................ 34 4.1.1 System confi g uration verification ........... .................. .............. 34 4.2 Award BIOS setup .. ...................... ................. ...............[...]

vii i Chapter 6 Audio Setup..................................................... 75 6.1 Introduction .. ...................... ................. ....................... ..... 76 6.2 DOS utilities ............ ...................... ................. ................. 76 6.2.1 VIA Soun d Blaste r Pro comp atible set up program ............. ... 76 6[...]

Tabl e of Contents ix C.17 TV (video) Out C onnector (CN1) ............. .................... 132 C.18 Flat Panel Connecto r (CN11) ................... .................... 133 C.19 Extended Flat Panel Display Con nector (CN10) .......... 134 C.20 LCD Signal Mapping ............... ...................... ............... 135 C.21 LVDS Connector (CN9[...]

x[...]

1 Chapter 1 General Information 1 General Information This chapter gives background information on the PCM-9575. Sections include: • Introduction • Features • Specifications • Board layout and dimensions CHAPTER[...]

PCM-9575 User’s Manual 2 Chapter 1 Introduction 1.1 Introduction The PCM-9575 is a VIA low-power Eden/Ezra processor single board computer (SBC) with audi o controller , a 4X AGP SVGA controller , a PCI 10/100Base-T Ethernet interface, on e PCI slot, and one PC/104-Plus expansion connector . The PCM-9575’ s design is based on th e EBX form fact[...]

3 Chapter 1 General Information 1.2 Features • Embedded VIA low-power Eden/Ezra processor • EBX form factor which suppo rts both PC/104- Plus and PCI slot • Supports one 36 bit TFT LCD panel, with up to 1024 x 7 68 resolu- tion • Supports 2 channel L VDS interface • 100/10Base-T Ethernet interf ace, IEEE 802.3U compatible • Supports wak[...]

PCM-9575 User’s Manual 4 • Enhanced IDE interface: T wo channels suppo rts up to four EIDE devices. BIOS auto-detect, PIO Mode 3 or Mode 4, UDMA 33 transfer . Primary IDE support up to UDMA 66/100 mo de • FDD interface: Supports up to two FDDs • Serial ports: Four serial RS-232 ports, COM1, 3, 4: RS-232, COM2: RS-232/42 2/485 • Parallel p[...]

5 Chapter 1 General Information Provides Composite video and S-video output s via RCA (composite) connector and S-video connector Supports 640 x 480 and 800 x 600 in put resolutions Supports W indows© 95/98/NT and Windows XP drivers Over-scan, under-scan and position adjustable Auto-detection of TV presence met Interface 1.3.6 PCI bus Ethernet int[...]

PCM-9575 User’s Manual 6 1.4 Board layout: dimensions Figure 1.1: Board layout: dimensi ons[...]

7 Chapter 2 Installatio n 2 Installation This chapter explains the setup pr ocedures of PCM-9575 hardw are, includi ng instruc- tions on settin g jumpers and connecting peripherals, switches an d indicators. Be sure to read all safety precautions before you begi n the instal lation p rocedure. CHAPTER[...]

PCM-9 575 User’s Ma nual 8 Chapter 2 Inst allation 2.1 Ju mpers The PCM-957 5 has a number of jump ers that allow you to confi gure your system to suit your application . The table below lists the functions of the vari ous jum pers. 2.2 Connect ors On-board connecto rs link the PCM-9575 to external devices such as hard disk drives , a keyboard, o[...]

9 Chapter 2 Installatio n CN8 CR T display c onnector CN9 L VDS connector CN10 Ext. flat panel conne ctor CN1 1 Flat panel co nnector CN12 Ethernet con nector CN13 Power & HDD LED connector CN14 IDE har d drive connect or (secondary) CN15 Parallel po rt connector CN16 IDE har d drive co nnector (p rimary) CN17 PC/104 pl us (ISA + PCI) expa nsio[...]

PCM-9 575 User’s Ma nual 10 2.3 Locat ing jumpers Figure 2.1 : Jumper locati ons[...]

11 Chapter 2 Installatio n 2.4 Locating Connec tors Figure 2.2: Connector s (compon ent sid e)[...]

PCM-9 575 User’s Ma nual 12 2.5 Sett i ng Jumpers Y ou may configur e your card to m atch the needs of you r application by setting jumpers. A jump er is a metal bridge used to close an electric cir- cuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover ) that slides over the p ins to connect them. T o “[...]

13 Chapter 2 Installatio n 2.6 Cle ar CMOS (JP4 ) This jumper is us ed to erase CMOS data and r eset system BIOS informa- tion. The procedur e for clearing CMOS is: 1. T urn off t he system. 2. Short p in 2 and pin 3 . 3. Return jump er to pins 1 and 2 . 4. Turn on the system. The BIOS is n ow reset to its default setting War n in g! T o a void dam[...]

PCM-9 575 User’s Ma nual 14 2.7 In stalling DI MMs The procedure for installing DIMMs is described below . Please follow these steps carefully . The number of pins are d ifferent o n either side of the breaks, so the mod ule can only fit in one way . DIMM modules have differen t pin contacts on each side, an d therefore hav e a higher pin den - s[...]

15 Chapter 2 Installatio n (See your hard d rive’ s documen tation for the location o f the con- nector .) If desired, conne ct a second drive as described above. Unlike floppy drives , IDE hard drives can connect to either end of the cable. If you install two drives, you will need t o set one as the master and one as th e slave by us ing jumper [...]

PCM-9 575 User’s Ma nual 16 If you are con necting a 3.5” floppy drive, yo u may have tro uble determi n- ing whic h pin is num ber one. Look for a number prin t ed on the circuit board indi cating pin num ber one. In addition, t he connector on t he flop py drive may have a slo t. When the s lot is up , pin number one sho uld be on the right. [...]

17 Chapter 2 Installatio n them. The f ront panel co nnector (CN 13) is an 8- pin male, dual in-li ne header . It provides connections for a s p eaker , hard disk acces s indicator , watchdog output, and an input switch for resetting the card. 2.13.1 Power & HDD LED (CN13) The HDD LED indicator for hard disk acces s is an active low sign al (24[...]

PCM-9 575 User’s Ma nual 18 2.16 IR connector (CN24) This connector supports the optional wireless infrared transmitting and receiving module. This module mounts on the system case. Y ou must configure the setting through BIOS s etup. 2.17 A udio interfaces (CN4, CN2) The PCM-9575 is equipped with a high-quality audio interface, which provides 16[...]

19 Chapter 2 Installatio n 2.17.1 Audio connector (CN4) The PCM-95 75 provides all maj o r audio signals on a 16- pin flat-cable connector , CN4. These audio sign als include Microphone in (mono) , Line in (stereo ), Line out ( s tereo), an d Speaker out (stereo) . If you us e tradi- tional telephone jack conn ectors for these aud io signals, you w[...]

PCM-9 575 User’s Ma nual 20 2.19 VGA/LCD/L VDS interface connections The PCM-9575’ s PCI SVGA interface can drive conventional C R T dis- plays and i s capable of driving a w ide range o f flat panel di splays, includ- ing passive LCD and active LCD dis plays. The bo ard has three connectors to support these display s: one for standard CR T VGA[...]

21 Chapter 2 Installatio n S1 is an 8 segment DIP switch for DSTN/TF T panel type and resolution functions . 2.20 TV-out interface (optional) (CN1) The PCM-9575 board provides opt ional TV-o ut via CN1. This consi sts of a 5-pin wa fer box h eader . Output supp orts composite video and S-video connectors v i a an opti onal cable ki t (p/n: 1 103050[...]

PCM-9 575 User’s Ma nual 22 2.21 Ethernet configuration The PCM-95 75 is equipped wi th a high pe rformance 32- bit PCI-bus Ethernet interface which is fully compliant with IEEE 802.3U 10/ 100Mbps C SM A/CD standards. It is s upporte d by all maj or network operatin g system s. The medium type can be configured vi a the RSET81 39.EXE program incl[...]

23 Chapter 2 Installatio n involves one jumper an d running the con trol software (refer to Appendix A). 2.22.1 W atchdog t i mer action (JP5) When the watchdog timer activates ( C PU processing has come to a halt), it can reset the system or generate an interrupt on IRQ1 1. This can be set via sett ing JP5 as s hown below: 2.23 USB conne ctors (CN[...]

PCM-9 575 User’s Ma nual 24[...]

25 Chapter 3 Sof tware Conf igurat ion 3 Software Configur ation This chapter details the software configura- tion in formation. It shows you ho w to config- ure the card to match yo ur application requirements. The A W ARD System BIOS is covered in Chapter 4 . Sections include: • Introducti on • Connections for s tandard L CDs • Ethernet int[...]

PCM-9 575 User’s Ma nual 26 Chapter 3 Sof tware Configuration 3.1 In troduction The PCM-9575 system BI OS and custom drivers are located in a 256 Kbyte, Flash ROM device, designated U18. A single Flash chip holds the system BIOS, VGA BIOS and network Boot ROM image. The display can be configured via CMOS settings. This method minimizes the number[...]

27 Chapter 3 Sof tware Conf igurat ion 3.2 Connections to Thre e Standard LCDs The following tables illustrate typical LCD connection pinouts for the PCM-9575 . 3.2.1 Con nection s to T oshiba L TM10C2 09A (640 x 480 TFT color LCD) T able 3. 1: Connectio ns to T oshiba LTM10C209 A L TM1 0C209A PCM-957 5 CN1 1 Pin Name Pin Name 1 G ND 3 GND 2 CLK 35[...]

PCM-9 575 User’s Ma nual 28 3.2.2 Con nection s to T oshiba L TM15C1 51A (1024 x 768 TFT color LCD) 28 B 5 16 P7 29 GND 3 GND 30 V DD 1 +5 V 31 V DD 2 +5 V T able 3. 2: Connectio ns to T oshiba L TM15C151 A L TM15C151A PCM-9575 CN1 1 Pin Name Pin Name CN1-1 GND CN 1 1-33 GND CN1-2 NCLK CN 1 1-35 LD SCLK1 CN1-3 N C CN1-4 N C CN1-5 GND CN 1 1-3 GND[...]

29 Chapter 3 Sof tware Conf igurat ion 3.2.3 Con nection s to T oshiba L TM12C2 75A (800 x 600 TFT color LCD) CN1-25 OB5 CN 10-13 PD34 CN1-26 ENAB CN 1 1-37 M/DE CN1-27 GND CN 1 1-34 GND CN1-28 VDD CN 1 1-1 +5V CN1-29 VDD CN 1 1-2 +5V CN1-30 GND CN 1 1-8 GND T able 3. 3: Connectio ns to T oshiba LTM12C275 A L TM1 2C275A PCM-957 5 CN1 1 Pin Name Pin[...]

PCM-9 575 User’s Ma nual 30 3.3 Ethernet s of tware configuration The PCM-9575’ s on-board Ethern et interface supports all major networ k operating systems . T o configure the medium type, to v iew the current conf igu rati on, or to run d iag nosti cs, do the follo wing: 1. Power the P CM-9575 o n. Make sure that the RS ET8139.EXE file is loc[...]

31 Chapter 3 Sof tware Conf igurat ion Note For Et hernet in stallation, pleas e see Chap ter 7[...]

PCM-9 575 User’s Ma nual 32[...]

33 Chap ter 4 Award BIOS Setup Chapter 4 Ducks t hat Need Love! 4 Aw a r d B I O S S e t u p This chapter describes how to set B IOS configur ation data . CHAPTER[...]

PCM-9 575 User’s Ma nual 34 Chapter 4 Award BIOS Setup 4.1 Sys t em test and initialization These routines test an d initialize board hard w are. If the ro utines encoun- ter an error du ring the tests, you will either hear a few short beeps or see an error mes sage on the sc reen. There are two k inds of errors: fatal and non-fatal. The system c[...]

35 Chap ter 4 Award BIOS Setup 4.2 A ward BIOS se tup A ward’ s BIOS ROM has a built-in Setup p rogram that allows users to modify the basic s y stem conf iguration. This type o f information is stored in battery-backed CMOS RAM so that it reta ins the Setup information when the power is turned off. 4.2.1 Entering setup Power on the computer and [...]

PCM-9 575 User’s Ma nual 36 4.2.2 Standard CMOS Features setup When you choose the Standard CMOS Features option from the Initial Setup Screen menu, the screen shown below is dis p layed. Th i s standar d Setup Menu allows users to configure syst em components su ch as date, time, hard d isk drive, flop py drive and disp l ay . Once a field is h [...]

37 Chap ter 4 Award BIOS Setup 4.2.3 Adva nced BIOS Features setup By choosing the Advan ced BIOS Features Setup option from the In itial Setup Screen menu, the s creen below is d isplayed. This sample scr een contains the manufactur er ’ s default values for the PCM-957 5 Series. Figure 4.3: Advanced BIOS Features setup[...]

PCM-9 575 User’s Ma nual 38 4.2.4 Adva nced Chipset Features set up By choosing the Advanced Chipset Features o ption from the Initial Setup Screen menu, the s creen below is displayed. This sample screen contains the manufa ct urer’ s default values fo r the PCM-9575 Series . Figure 4.4: Advanced C hipset Features setup[...]

39 Chap ter 4 Award BIOS Setup 4.2.5 I ntegrated Peripheral s Choosing the Integrated Peripherals option from the Initial Setup Screen menu shou ld produce the sc reen below . Here we see the manufacturer’ s default values for the PCM-9575 Series . 4.2.6 Power Management Setup By choosing the Power Management Setup option from the Initial Setup S[...]

PCM-9 575 User’s Ma nual 40 4.2.7 PnP/PCI Configuratio ns By choosing the PnP/PC I Configurations option from the Initial Setup Screen menu, the s creen below is displayed. This sample screen contains the manufa ct urer’ s default values fo r the PCM-9575 Series . 4.2.8 PC Health Status The PC Health Status option displays info rmation such as [...]

41 Chap ter 4 Award BIOS Setup 4.2.9 Frequency/V oltage Control By choosing the Frequ ency/V o ltage Control option from the Initial Setup Screen menu, the s creen below is displayed. This sample screen contains the manufa ct urer’ s default values fo r the PCM-9575 Figure 4.9 : Frequency/V oltage Con trol Caution Incorrec t settings in Fre quenc[...]

PCM-9 575 User’s Ma nual 42 4.2.10 L oad Optimized Defaults Load Optimized Defaults loads the default sy stem values directly from ROM. If the stor ed record created by the Setu p program s hould ever become corrup ted (and therefor e unusable), these defaults will load auto- matically when you turn the P CM-9575 Se ries system on . 4.2.1 1 S et [...]

43 Chap ter 4 Award BIOS Setup 3. At the “Confi rm Pass word” pro mpt, retype t he desired p assword, then press <Enter>. 4. Select Save to CMOS and EXIT , type <Y>, then < Enter>. T o Change Passwo rd 1. Choose the Set Pas sword option from the CMOS Setup Utility main menu and pr ess < Enter >. 2. When you see “Enter [...]

PCM-9 575 User’s Ma nual 44 4.2.13 Exi t Without Savin g Selecting t his optio n and pr essing <Ent er> lets yo u exit the Setup pro- gram withou t record ing any n ew values o r changing ol d ones.[...]

45 Chapter 5 PCI SVGA Se tup 5 PCI SVGA Setup • Introducti on • Installation of SVGA driv ers -for W indows 9 5/98/Me -for W indows NT /2000/XP • Further information CHAPTER[...]

PCM-9 575 User’s Ma nual 46 Chapter 5 PCI SVGA Setup 5.1 In troduction The PCM-9575 has an onboard AGP flat panel/VGA interface. Th e spec- ifications and featur es are described as follows: 5.1.1 Chipset The PCM-95 75 uses a VIA T wist er 8606T chi pset f rom VIA T echnology Inc. for its AGP/SVGA controller . It supports many popular LCD, and L [...]

47 Chapter 5 PCI SVGA Se tup 5.1.4 Dual/Simult aneous Display The PCM-95 75 uses a VIA T wister VT8 606T LCD cont roller that is capable of providing simultaneo us dual view displa y of the s ame content on a flat pa nel and CR T . T o set up dual vi ew (simultaneus m ode) under W indows 9x, W indows ME, W indows NT/2000/ XP , follow these steps: S[...]

PCM-9 575 User’s Ma nual 48 5.2 In stallation of the SVGA D river Complete the following steps to inst all the SVGA driver . Follow the pro- cedures in the fl ow chart that apply to th e operating system that you are using within yo ur PCM-9575. 5.2.1 Installati on for Windows 95 Step 1. Select "Start", "Settings", "Contr[...]

49 Chapter 5 PCI SVGA Se tup Step 2. Choos e the "Adapter" tab , then press the "C hange..." button . Step 3. Press the "Have Disk" bu tton.[...]

PCM-9 575 User’s Ma nual 50 Step 4. T ype in the path: D:Bis cuit9575 VGAW in9x_Me Step 5. Select the highligh ted item, and click the "OK" bu t ton.[...]

51 Chapter 5 PCI SVGA Se tup Step 6. "S3 Graphics T w ister" appears un der the adapter tab. Click the "Apply" button, then the "OK" button. Step 7. Press “Y es” to reboot.[...]

PCM-9 575 User’s Ma nual 52 5.2.2 Installati on for Windows 98/Me Step 1. Select "Start", "Settings", "Control Panel", "Display ", and "Set- tings," then press the "Advanced..." button.[...]

53 Chapter 5 PCI SVGA Se tup Step 2. Select “Adapter ,” then “Change. ”[...]

PCM-9 575 User’s Ma nual 54 Step 3. Press “Next,” then “Dis play a list....” Step 4. Press the “Have dis k...” button.[...]

55 Chapter 5 PCI SVGA Se tup Step 5. Insert the CD into the CD-ROM drive. T ype in the path D:Biscuit9575VGAWin9x_Me Then press “OK” Step 6. Select the highlighted item, then click “OK.”[...]

PCM-9 575 User’s Ma nual 56 Step 7. "S3 Graphics T w ister"appears un der the adapter tab. Cl ick the "App ly" bu tto n. Step 8. Press “Y es” to reboot.[...]

57 Chapter 5 PCI SVGA Se tup 5.2.3 Installati on for Windows NT Step 1. Select "Start", "Settings", "Control Panel" and double click the "Display" icon. Note: Service Pack X (X = 3, 4, 5, 6,...) mus t be install ed first , before y ou insta ll the Windows NT VG A driv er .[...]

PCM-9 575 User’s Ma nual 58 Step 2. Choose the "Settings" tab, and press th e "Display T ype" button.[...]

59 Chapter 5 PCI SVGA Se tup Step 3. Press the "Chan ge..." button.[...]

PCM-9 575 User’s Ma nual 60 Step 4. Click the "Have Disk... " button. Step 5. T y pe the path: D:BiscuitVGAWinNT Press t he "OK" button.[...]

61 Chapter 5 PCI SVGA Se tup Step 6. Select the highlighted item, and click the "OK" button. Step 7. Press "Y es" to proceed. Step 8. P ress "OK" to reboot.[...]

PCM-9 575 User’s Ma nual 62 5.2.4 Installati on for Windows 2000 Step 1. Select "System", "Set tings", "Contro l Panel" and do uble click the "system" icon.[...]

63 Chapter 5 PCI SVGA Se tup Step 2. Choose the "V ideo Controller (VGA Compatible)” button.[...]

PCM-9 575 User’s Ma nual 64 Step 3. Ch oose the "Drive" button, press “Update Driver ...” button.[...]

65 Chapter 5 PCI SVGA Se tup Step 4. Choose "Dis play a list of..." , then p res s “Next” button. Step 5. Choose “Dis play adapters”, press “Next” b utton.[...]

PCM-9 575 User’s Ma nual 66 Step 6. Click the “Have Disk” b utton. Step 7. T y pe the path D:Biscuit9575VGAWin2000 press the “OK” butto n.[...]

67 Chapter 5 PCI SVGA Se tup Step 8. Press “Finish" to reboot. 5.2.5 Installati on for Windows XP Step 1. Select "System", "Set tings", "Contro l Panel" and do uble click the "system" icon.[...]

PCM-9 575 User’s Ma nual 68 Step 2. Choose “Hard ware” and “Device Manager”, press “OK” button.[...]

69 Chapter 5 PCI SVGA Se tup Step 3. Choose “V ideo Controller (VGA Compatible), pres s “OK” but- ton.[...]

PCM-9 575 User’s Ma nual 70 Step 4. Choose "Driv er”, “Update Driver”, press “OK” button. Step 5. Choos e “Install from a lis t.....” , press “Next”.[...]

71 Chapter 5 PCI SVGA Se tup Step 6. Choose “Don ’t search. I will....”, pr es s “Next” button. Step 7. Choose “Dis play adapters”, press “Next” b utton.[...]

PCM-9 575 User’s Ma nual 72 Step 8. T y pe the path D:Biscuit9575VGAWinXP then press “OK” butto n. Step 9. Choose “S3 Gr aphics T wister + S3 Hotkey” then press “Next” butto n.[...]

73 Chapter 5 PCI SVGA Se tup Step 10. Press “Finish" t o reboot. 5.3 Further Information For further information about the AGP/VGA installati on in your PCM- 9575, i ncluding d river updates, tro ubleshooti ng guides and F AQ list s, visit the follo wing web resource s: VIA website: www .via.com.tw[...]

PCM-9 575 User’s Ma nual 74[...]

75 Chap ter 6 Audi o Set up 6 Audio Setup The PCM-95 75 is equipped wi th an audio interface that records and plays back CD-quality audio. This chapter provides instructions for installing the software drivers included on the audio driver diskettes. CHAPTER[...]

PCM-9 575 User’s Ma nual 76 Chapter 6 Aud io Setup 6.1 In troduction The PCM-9575's on-board audio interface provides high-qu ali ty stereo sound and FM music synth esis (ESFM) by using th e VIA VT82C686 audio controller fr om VIA. The audio interface can record, compres s, and play back voice, so und, and music with built-in mixer control. [...]

77 Chap ter 6 Audi o Set up 6.2.2 VI A Sound Blaster Instal lation Follow these st eps to enable the Sound Blaster Pro compatib le functions. Step 1. Enable the Sou nd Blaster first on the BIOS setting o f the "Onboar d Legacy Audio" an d "On-Chip Soun d". Step 2. Ru n the "Install.exe". A:> INST ALL Step 3. The pro[...]

PCM-9 575 User’s Ma nual 78 6.3.2 Windows 95/98 drive rs Step 1. Click "Start" and select "Settings". Click "Control Panel" and double-click "Add New Hardware". Step 2. In the Add New Hardware W izard window , click "Next".[...]

79 Chap ter 6 Audi o Set up Step 3. In the following Add New Hardware W izard window , click "Next" for W indows to search for Plug and Play devices . Step 4. In the followi ng Add New Hard ware W izard window , select "No, the device isn't in the list."and click "Next".[...]

PCM-9 575 User’s Ma nual 80 Step 5. In the followi ng Add New Hard ware W izard window , select "No, I want to select..." and click "Next". Step 6. In the following Add New Hardware W izard window , select "Sound , video and game controllers" and cl ick "Next ".[...]

81 Chap ter 6 Audi o Set up Step 7. In the following Add New Hardware W izard window , click "Have Disk...". Step 8. In the Install From D isk window , click "Brows e".[...]

PCM-9 575 User’s Ma nual 82 Step 9. In the Open window , select "D:Biscuit9575Au dio98se_Me_2k_xpWIN95_9 8. Step 10. In the Install From Disk window , click" OK".[...]

83 Chap ter 6 Audi o Set up Step 1 1. In the Select Device window , select "VIA PCI Audio Controller (WDM)" and cli ck "OK". Step 12. In the Add New Hard ware W i zard window , click "Next".[...]

PCM-9 575 User’s Ma nual 84 Step 13. The Copying Fil es... windo w will ap pear . Step 14. In the Add New Hard ware W izard window , click "Finis h". Then reboot the system.[...]

85 Chap ter 6 Audi o Set up 6.3.3 Windows NT drivers Step 1. Click "Start" and select "Settings". Click "Control Panel" and double-click "Multimedia". Step 2. In the Multimedia Properties window , select the "Devices" tab . Then select the "Audio Dev ices" item, and click "Add.. .&quo[...]

PCM-9 575 User’s Ma nual 86 Step 3. In the Add window , select the "Unlisted..." item and cl ick "OK". Step 4. When the Install Driver window appears , insert the utility disc into the CD-ROM drive. T y pe: D:Biscuit95 75AudioW inNT Then click "OK".[...]

87 Chap ter 6 Audi o Set up Step 5. In the Add Unlisted or Updated Driver wi ndow , select the "VIA PCI Audio controller" item. Then click "OK". Step 6. In the Sys tem Sett ing Change windo w , click "Restart Now".[...]

PCM-9 575 User’s Ma nual 88 6.3.4 Windows 2000 Drivers Step 1. Select “System”, “Setting”, “Control Panel” and double click “system” icon. Step 2. Ch oose “Multimedia Audi o Controller” b utton.[...]

89 Chap ter 6 Audi o Set up Step 3. Choose “Driv er button, press “Update Driver” button. Step 4. Ch oose “Sound, video and game controllers”, press “Next”[...]

PCM-9 575 User’s Ma nual 90 Step 5. Click the “Have Disk... ” button Step 6. T ype the path D:Biscuit9575Au d io98se_Me_2k _xpW in200 0 press the “ok” butto n. Step 7. Click “Have Disk” bu tton[...]

91 Chap ter 6 Audi o Set up Step 8. Press “Next” button Step 9. P ress “Finis h” to reboot[...]

PCM-9 575 User’s Ma nual 92[...]

93 Chapter 7 PCI Bus Ethernet Interface 7 PCI Bus Ether n et Inter face This chapter provides inform ation on Ethernet conf iguration. • Introducti on • Installation of Ethernet drivers for W indows 98/2 000/NT • Further information CHAPTER[...]

PCM-9 575 User’s Ma nual 94 Chapter 7 PCI Bu s Ethernet Interf ace 7.1 In troduction The PCM-95 75 is equipped wit h a high perfo rmance 32-bit Ethern et chipset which is f ully compliant with IEEE 802.3 100 Mbps CSMA/CD standard s. It is supported by majo r network operating systems. It is als o both 100Ba s e-T and 10B as e-T compatible. Th e m[...]

95 Chapter 7 PCI Bus Ethernet Interface 7.2.2 Installati on for Windows 98 Step 1. a. Select "Start", "Settings". "Control Panel". b. Double click "Network". Step 2. a. C li ck "Add " and prepare t o install net work funct ions.[...]

PCM-9 575 User’s Ma nual 96 Step 3. a. Select the "Adapter" item to add the Ethernet card. Step 4. a. Click "Have Disk" to i nstall the driver . Step 5. a. Insert the CD in to the D: drive b. Fill in "D:Bis cuit9575LAN” c. Click "OK"[...]

97 Chapter 7 PCI Bus Ethernet Interface Step 6. a. Choose the "Re altek R TL8139(A/ B/C/8130 ) PCI Fast Ethernet" item. b. Click "OK". Step 7. a. Make sure the configurations of relative items are set corr ectl y . b. Click "O K" to reboo t.[...]

PCM-9 575 User’s Ma nual 98 7.2.3 Installati on for Windows 2000 Step 1. Open Device Manag er,[...]

99 Chapter 7 PCI Bus Ethernet Interface Step 2.[...]

PCM-9 575 User’s Ma nual 100 Step 3. Step 4.[...]

101 Chapter 7 PCI Bus Et hern et Int erface Step 5. Step 6.[...]

PCM-9 575 User’s Ma nual 102 Step 7. Step 8.[...]

103 Chapter 7 PCI Bus Et hern et Int erface Step 9. 7.2.4 Installati on for Windows NT Step 1. a. Select "St art", "Settings ", "Control Panel" b. Double click "Network" Step 2. a. Cho ose type of network .[...]

PCM-9 575 User’s Ma nual 104 b. Click "Next" Step 3. a. Click "Select from list... "[...]

105 Chapter 7 PCI Bus Et hern et Int erface Step 4. Click “Have Disk.” Step 5. a. Insert the Utility CD ROM b. Fill in the correct path: D:Biscuit9575LAN 8139Cwinnt4 c. Click "OK".[...]

PCM-9 575 User’s Ma nual 106 Step 6. Check the highlighted item, and click “OK.”[...]

107 Chapter 7 PCI Bus Et hern et Int erface 7. Click “Nex t” to contin ue setup. Step 8. Ch oose the networki ng protoc ols, then click "Next"[...]

PCM-9 575 User’s Ma nual 108 Step 9. Select the correct Network Services then click "Next" Step 10. Click “Next” to continue setup.[...]

109 Chapter 7 PCI Bus Et hern et Int erface 1 1. Click “Next” to start the netwo rk. 7.3 Further information Realtek w ebsite: www .realtek.com.t w Intel website: www .intel.com[...]

PCM-9 575 User’s Ma nual 110[...]

111 Appx. A A Programming the W atchdog Timer The PCM-957 5 is equi pped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliab ility in industri al standalo ne or unmanned envi- ronments. Appendix[...]

TPC-64 2 User’s Man ual 112 Append ix A Progra mming the W atchdog Ti m e r A.1 Supported Input T iming Modes In order t o program the wat chdog t i mer , you mu st write a program which writes I/O port address 4 43 (hex). The out put data i s a value of time inter- val. The value ran g e is from 01 (hex) to 3E ( hex), and the related time interv[...]

113 Appx. A The follow ing examp le shows how you might prog ram the watchdog timer in BASIC: 10 REM Watchdog timer example program 20 O UT &H443, data REM Start and restart the watchdog 30 G OSUB 1000 REM Your application task #1 40 O UT &H443, data REM Reset the timer 50 G OSUB 2000 REM Your application task #2 60 O UT &H443, data REM[...]

TPC-64 2 User’s Man ual 114[...]

115 Appx. B B Installing PC/104-Plus Modules This appe ndix gives instructions for installing PC /104- Plus modules. Appendix[...]

TPC-64 2 User’s Man ual 116 Appendix B Installing PC /104-Plus Modu les B.1 Insta lling PC/104-Plus Modules The PCM-9575's PC /104 connectors giv e you the flexibility to attach PC/ 104+ modul es. Install ing these m odules on the PCM-9575 i s quic k and simpl e. The fol- lowing steps s how to mo unt the PC/104 + modules : 1. Remove the PCM-[...]

117 Appx. B Figure B .1: PC/104+ mod ule mounting d iagram[...]

TPC-64 2 User’s Man ual 118 Figu re B.2 : PC/1 04+ mo dule dimens ions ( mm) ( ±0.1 )[...]

119 Appx . C C Pin Assignment s This appe ndix contai ns inform at ion of a detailed or specialized nature. It includes: • CPU Fan Power Connector • Ethernet 10/100Base- T Connector • Audio Con nector • CD Drive Connector • Main Power Connector • Keyboard an d PS/2 Mou se Connector • Floppy D rive Connect or • PC/104 Co nnector • [...]

PCA-61 83 User’s Manu al 120 Appendix C Pin A ssignmen ts C.1 CPU Fan Power C onnector (F AN 1) C.2 Et hernet 10/100 Base-T Conne ctor (CN 12) T able C.1: IR connector (F AN 1) Pin Signal 1 F an spee d signal input 2+ 5 V 3G N D T able C.2: Ethernet 1 0/100Base-T con nector (CN12) Pin Signa l 1V C C 2 CRS LED 3 RCV+ 4 RCV- 5B N C L E D 6G N D 7N [...]

121 Appx . C C.3 Audio Connector (CN4) C.4 Audio In Connector (CN2) T able C.3: Audio connec tor (CN4) Pin Signa l Pin Signa l 1 SPEAKER OUT R+ 2 SPEAKER OUT R- 3 SPEAKER OUT L+ 4 SPEAKER OUT L- 5 LINE OUT R 6 LINE OUT L 7 GND 8 GND 9 LINE IN R 1 0 LINE IN L 11 G N D 1 2 G N D 13 NC 14 NC 15 MI C IN 16 GND T able C.4: Audio line-in connector (CN2) [...]

PCA-61 83 User’s Manu al 122 C.5 Main Power Connec tor (CN5) T a ble C.5: Main Power Connector (CN5) Pin Signal 1+ 5 V 2G N D 3G N D 4+ 1 2 V 5N . C . 6G N D 7+ 5 V[...]

123 Appx . C C.6 Keyboard and P S /2 Mouse Connector (CN25) T able C.6: Key board and mouse connector (CN25) Pin Signal 1 KB CLOCK 2 KB DA T A 3M S C L O C K 4G N D 5 + 5V (KB VCC) 6M S D A T A[...]

PCA-61 83 User’s Manu al 124 C.7 Floppy Disk Driv e Connector (CN18) T able C.7: Floppy Disk Drive Connec tor (CN18) Pin Signal Pin Signal 1 GND 2 DENSITY SELECT* 3G N D 4 N / C 5 GND 6 DRIVE TYPE 7 GND 8 INDEX* 9 GND 10 MOTOR O* 1 1 GND 12 DRIVE SELECT 1* 13 GND 14 DRIVE SELECT 0* 14 GND 16 MOTOR 1* 17 GND 18 DIRECT ION* 19 GND 20 STEP* 21 GND 2[...]

125 Appx . C C.8 PC/104 pl us Connectors (CN17) T able C.8: PC/104+ connectors (CN17 ) Pin N u m b e r R o w AR o w BR o w CR o w D 1 IOCHCHK* GND GND GND 2 SD7 RESET SBHE* MEMCS16* 3 SD6 + 5 V LA23 IOCS16* 4 SD5 IRQ 9 LA22 IRQ10 5 SD4 -5V LA21 IRQ1 1 6 SD3 DRQ2 LA20 IRQ12 7 SD2 -12V LA19 IRQ15 8 SD1 ENDXFR* LA18 IRQ14 9 SD0 +12V LA17 DACKO* 10 IOC[...]

PCA-61 83 User’s Manu al 126 23 SA8 IRQ5 ---- ---- 24 SA7 IRQ4 ---- ---- 25 SA6 IRQ3 ---- ---- 26 SA5 DACK2 * ---- ---- 27 SA4 TC ---- ---- 28 SA3 BAL E ---- ---- 29 SA2 +5V ---- ---- 30 SA1 OSC ---- ---- 31 SA0 0V ---- ---- 32 0V 0V ---- ---- * low active T able C.8: PC/104+ connectors (CN17 ) Pin N u m b e r R o w AR o w BR o w CR o w D[...]

127 Appx . C C.9 IDE Hard Drive Connector (CN14, CN1 6) T able C.9: IDE HDD connector (CN14, CN1 6) Pin S igna l Pin Signal 1 IDE RESET* 2 GND 3D A T A 7 4D A T A 8 5D A T A 6 6D A T A 9 7D A T A 5 8D A T A 1 0 9 DA T A 4 10 DA T A 1 1 11 D ATA 3 1 2 D ATA 1 2 13 DA T A 2 14 DA T A 13 15 DA T A 1 16 DA T A 14 17 DA T A 0 18 DA T A 15 19 SIGNAL GND [...]

PCA-61 83 User’s Manu al 128 C.10 Paral lel Port Connector (CN 15) T able C.10: Parallel Port Connec tor (CN15) Pin Si gnal Pin Sign al 1 STROBE* 2 AUT OFD* 3D 0 4E R R 5D 1 6I N I T * 7 D2 8 SLCTINI* 9D 3 1 0 G N D 11 D 4 1 2 G N D 13 D 5 14 GND 15 D 6 16 GND 17 D 7 18 GND 19 ACK* 20 GND 21 BUSY 22 GND 23 P E 24 GND 25 SLCT 26 N/C * low active[...]

129 Appx . C C.1 1 Power & HDD LED Connector(CN13) C.12 Reset Button Connector (CN22) T a ble C.1 1: Power & HDD LED Connector (CN13) Pin Signa l 1+ 5 V 2G N D 3 power LED+ (+5V) 4 HDD LED + 5 power LED - (GND) 6 HDD LED - T able C.12: Reset Button Connector (CN22) Pin Signal 1 Rese t signal input 2G N D[...]

PCA-61 83 User’s Manu al 130 C.13 USB Connector (CN20, CN28 ) C.14 LCD Inverter Ba cklight Connector (CN6) T a ble C.13: USB Connector (CN20 , CN28) Pin Signal Pin Sign al 1+ 5 V 2+ 5 V 3U V - 4U V - 5U V + 6U V + 7 G ND 8 GND 9 Chassis GND 10 N/C T able C.14: LCD Inverter Backlight Conn ector (CN6) Pin Signal 1+ 1 2 V 2G N D 3 ENABKL 4 VBR 5+ 5 [...]

131 Appx . C C.15 IR Connector (CN24) C.16 CRT Display Connector (CN8) T able C.15: IR Connector (CN24) Pin Signal 1 VCC (5 V) 2N . C . 3I R r e c e i v e 4G N D 5 IR tr ansmit T a ble C.16: CRT Displa y Connector (CN8) Pin Sign al Pin Signa l 1R E D 9 V G A G 2 + 5 V 10 H-syn c signa l 3 GREEN 1 1 VGA G 4 VGA G 12 V -sync sig nal 5B L U E 1 3 V G [...]

PCA-61 83 User’s Manu al 132 C.17 TV (video) Out Connec tor (CN1) T able C.17: TV (video) Out Connector (CN1) Pin Signal 1 Luminance out (S-Video Y output, b rightness) 2 Chrominance out (S-Video C output, color) 3G N D 4G N D 5 Composit e video out[...]

133 Appx . C C.18 Flat Pane l Connector (CN1 1) T able C.18: Flat Panel Connector (CN1 1) Pin Sig nal Pin Signa l 1 VDDSAFE5 (+5v output) 2 VDDSAFE5 (+5v outpu t) 3G N D 4G N D 5 VDDSAFE3 (+3.3 v output ) 6 VDDSAFE3 (+3.3 v output) 7N / C 8G N D 9P 0 1 0 P 1 1 1 P2 12 P3 13 P4 14 P5 15 P6 16 P7 17 P8 18 P9 19 P10 20 P 1 1 21 P12 22 P 13 23 P14 24 P[...]

PCA-61 83 User’s Manu al 134 C.19 Extended Fl at Panel Display Connector (CN10) T able C.19: Extend ed Flat Panel Display Connector (CN10) Pin Sig nal Pin Signa l 1G N D 2G N D 3P 2 4 4P 2 5 5P 2 6 6P 2 7 7P 2 8 8P 2 9 9 P30 10 P3 1 11 P 3 2 1 2 P 3 3 13 P34 14 P 35 15 GND 16 GND 17 N/C 18 N/C 19 N/C 20 N/C Note: The m odel numb er of the C N10 s[...]

135 Appx . C C.20 LCD Signal Mapping T able C.20: LCD Signal M apping Pin Name 16-bit DSTN 24-bit DSTN 18-bit TFT 24-bit TFT 36-bit TFT PD0 LB3 B0 R00 PD1 LB2 B1 R10 PD2 LB1 LB1 B0 B2 R0 1 PD3 LB0 LB0 B1 B3 R1 1 PD4 UB3 B2 B4 R 02 PD5 UB2 B3 B5 R 12 PD6 UB1 UB1 B4 B6 R 03 PD7 UB0 UB0 B5 B7 R 13 PD8 LG3 G0 R04 PD9 LG2 LG2 G1 R1 4 PD10 LG 1 LG1 G0 G2[...]

PCA-61 83 User’s Manu al 136 C.21 L VDS Connector (CN9) C.22 Peripher a l Power Connector (CN27) T a ble C.21: L VDS Connector (CN9) Pin Sig nal Pin Signa l 1G N D 2G N D 3 TX0+(Chann el 1) 4 TX0+( Channel 2) 5 TX0-(Channel 1 ) 6 TX0-(Channel 2) 7 TX1+(Chann el 1) 8 TX1+( Channel 2) 9 TX1-(Channel 1 ) 10 TX1-( Channel 2) 1 1 TX2+(Channel 1) 12 TX[...]

137 Appx . C C.23 COM Port Connector (CN19) T a ble C.23: COM Port Connector (CN19) Pin Sig nal Pin Signa l 1 RLSD1 (DCD1) 2 DSR1 3R X 1 4R T S 1 5T X 1 6C T S 1 7D T R 1 8R I 1 9G N D 1 0 G N D 1 1 RLSD2 (DCD2) 12 DSR2 13 RX2 14 RTS2 15 TX2 16 C TS2 17 DTR2 18 RI2 19 GND 20 NC 21 RLSD3 (DCD3) 22 DSR3 23 RX3 24 RTS3 25 TX3 26 C TS3 27 DTR3 28 RI3 2[...]

PCA-61 83 User’s Manu al 138 C.24 CompactFlash C ard Connector (CN26 ) T able C.24: Compac tFlash Card Connecto r (CN26) Pin Sig nal Pin Signa l 1G N D 2D 0 3 3D 0 4 4D 0 5 5D 0 6 6D 0 7 7* C S 0 8A 1 0 9 *A T A SEL 10 A09 11 A 0 8 1 2 A 0 7 13 +5 V 14 A 06 15 A05 16 A 04 17 A03 18 A 02 19 A01 20 A 00 21 D00 22 D 01 23 D02 24 -IOCS16 25 *CD2 26 -[...]

139 Appx . C C.25 A TX Powe r Feature Connector (CN3) T a ble C.25: A TX Power Feature Connector (CN3) Pin Signal 1 5VSB (Stand by v oltage) 2G N D 3 PS. ON#[...]

PCA-61 83 User’s Manu al 140[...]

141 Appx . D D System Assignme nts This appe ndix contai ns inform at ion of a detailed nature. It includes: • System I/O ports • 1st MB memory map • DMA channel assignments • Interrupt assignmen ts Appendix[...]

PCA-61 83 User’s Manu al 142 Appendix D System Assignments D.1 Sys tem I/O Ports T able D.1: System I/O ports Addr . range (Hex) Device 000-01F DMA c ontroller 020-021 Interrupt co ntroller 1, master 040-05F 825 4 timer 060-06F 8042 (k eyboard controll er) 070-07F Real- time clock , non-mas kable int errupt (NMI) mask 080-09F DMA p age regis ter [...]

143 Appx . D D.2 1st MB memory map D.3 DM A channel assignments T able D.2: 1st M B memor y map Addr . range (Hex) Device F0000h - FFFFFh System RO M *CC000h - EFFFF h Unused (reserved for Ethernet R OM) C0000 h - CBFFFh Expansio n ROM (for VGA BI OS) B8000h - BF FFFh CGA/EGA/VGA tex t B0000h - B7 FFFh Unused A0000h - AF FFFh EGA/VGA gra phics 0000[...]

PCA-61 83 User’s Manu al 144 D.4 Interrupt assignme nts T able D.4: Interr upt assignme nts Inter rupt# Inter rupt source IRQ 0 I nterval ti mer IRQ 1 K eyboa rd IRQ 2 Inter rupt from contr oller 2 (ca s cade) IRQ 3 COM2 IRQ 4 COM1 IRQ 5 COM4 IRQ 6 FDD IRQ 7 LPT1 IRQ 8 R TC IRQ 9 Reserved (aud io) IRQ 10 COM3 IRQ 1 1 Reserved for watchd og timer [...]

145 Appx. E E Optional Ext ras for the PCM-9575 Appendix[...]

PCM-9 575 User’s Ma nual 146 E.1 PCM-1 0586-5A0 0 cable ki t for PCM-9575 The PCM-95 75 requires sever al cables for normal operation. Y ou can make them your s elf or purcha se an optional cable kit assemb l y , which includes the following: PCM-1 0586-5V00 ca ble kit f or PCM- 9575 Par t No . C abl e Des cr i pt ion PCM - 9575 Con n ec to r T e[...]

147 Appx. E E.2 Optional LCD ca bles 10.4" TFT LCD panel (CN14) E.3 Optional USB ca ble (CN20) Optional USB cable (2 -channel) Part n o: 1703100261 Optiona l USB Cable for MBPC-300 P art no. 1703100121 E.4 A TX Power Contr ol Cable (CN3) part no.:1703 200100 E.5 O ptional P C/104+ to PCI Mod ule PCM-200- 00A2 PC/10 4+ to PCI Module E.6 Optiona[...]

PCM-9 575 User’s Ma nual 148[...]

149 Appx. F F Mechanical Drawings Appendix[...]

P C M-9575 U s e r ’ s M a n u al 1 5 0 F .1 Mech anical Drawi ngs Figure F .1: PCM-9 575 Mechanical Dra wing (Side view f or PCM-957 5F-Q0A1 (w / fan) and PCM-957 5F-M0A1 (w/o fan ) only )[...]

151 Appx. F Figure F .2: PCM-95 75 Mechanical Draw ing (compon ent side)[...]

PCM -9575 U s e r ’ s M a n u al 1 5 2 Figu re F .3: PCM- 9575 M ech anic al Draw ing ( solde r sid e)[...]