IBM SC33-1686-02 manuel d'utilisation

CICS  Transaction Server for OS/390  IBM CICS Supplied Transactions Release 3 SC33-1686-02[...]

[...]

CICS  Transaction Server for OS/390  IBM CICS Supplied Transactions Release 3 SC33-1686-02[...]

Note! Before using this information and the product it supports, be sure to read the general information under “Notices” on page vii. Third edition (March 1999) This edition applies to Release 3 of CICS Transaction Server for OS/390, program number 5655-147, and to all subsequent versions, releases, and modifications until otherwise indicated i[...]

Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix What this book is about ............................[...]

CEBT PERFORM commands .............................. 2 5 The HELP panel ..................................... 3 0 Chapter 8. CECI—command-level interpreter . . . . . . . . . . . . . . . . . . . . 31 The HELP panel ..................................... 3 1 Command-level syntax-checking transaction (CECS) .................. 3 2 Chapter 9. CEDA—re[...]

Chapter 21. CSFE—terminal and system test .................... 249 Terminal test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 System spooling interface trace ............................. 249 Terminal builder trace .................................. 249 Debug functions . . . . . . . . . . . . . . . . . . . . .[...]

vi CICS Supplied Transactions[...]

Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or [...]

Trademarks The following terms are trademarks of International Business Machines Corporation in the United States, or other countries, or both: Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Other company, product, and service names may be trademarks or service m[...]

Preface What this book is about This book tells you how to start the transactions supplied with CICS  . It tells you how to control the CICS system, how to send messages, how to collect statistics, and how to get terminal error information. It is also useful if you are responsible for preparing procedures for people who operate such terminals. T[...]

Notes on terminology  CICS refers to IBM  CICS Transaction Server for OS/390 Release 3  VTAM  refers to IBM ACF/VTAM   IMS  refers to IBM IMS/ESA   TCAM refers to the DCB interface of ACF/TCAM. x CICS Supplied Transactions[...]

Bibliography CICS Transaction Server for OS/390 CICS Transaction Server for OS/390: Planning for Installation GC33-1789 CICS Transaction Server for OS/390 Release Guide GC34-5352 CICS Transaction Server for OS/390 Migration Guide GC34-5353 CICS Transaction Server for OS/390 Installation Guide GC33-1681 CICS Transaction Server for OS/390 Program Dir[...]

CICSPlex SM books for CICS Transaction Server for OS/390 General CICSPlex SM Master Index SC33-1812 CICSPlex SM Concepts and Planning GC33-0786 CICSPlex SM User Interface Guide SC33-0788 CICSPlex SM View Commands Reference Summary SX33-6099 Administration and Management CICSPlex SM Administration SC34-5401 CICSPlex SM Operations Views Reference SC3[...]

Subsequent updates will probably be available in softcopy before they are available in hardcopy. This means that at any time from the availability of a release, softcopy versions should be regarded as the most up-to-date. For CICS Transaction Server books, these softcopy updates appear regularly on the Transaction Processing and Data Collection Kit[...]

xiv CICS Supplied Transactions[...]

Summary of changes This edition is based on the CICS Transaction Server for OS/390 Release 2 edition, SC33-1686-01. Changes for this edition are marked by vertical bars to the left of the text. | Changes for this edition | Changes include: |  The CEMT transaction is extended to support the new resource types: | – DOCTEMPLATE | – ENQMODEL | ?[...]

Changes for the CICS Transaction Server for OS/390 release 1 edition This edition is based on the CICS/ESA 4.1 CICS-Supplied Transactions manual (SC33-0710-00). For CICS Transaction Server for OS/390, the following changes have been made:  Removal of local DL/I and CEMT INQUIRE and SET PITRACE  Addition of CEMT DISCARD JMODEL, CEMT DISCARD JO[...]

introduction Chapter 1. Transactions supplied by CICS CICS provides operations, usually initiated from terminals, called transactions , each of which involves the use of CICS tables, programs, and internal services. This book deals with those transactions that are supplied by CICS and which, in addition, have an operator interface. CICS transaction[...]

introduction Syntax notation and conventions used in this book Each command has a syntax box to show you what options there are. You interpret the syntax by following the arrows from left to right. The conventions are: Minimum abbreviation of keywords In general, the CICS transactions accept as few characters of a keyword as needed to identify it w[...]

introduction | $ (the dollar symbol) | In the character sets given in this book, the dollar symbol ($) | is used as a national currency symbol and is assumed to be | assigned the EBCDIC code point X'5B'. In some countries a | different currency symbol, for example the pound symbol (£), | or the yen symbol (¥), is assigned the same EBCDI[...]

introduction Master terminal operator The master terminal operator controls system components using the master terminal transaction, CEMT. With this transaction, the master terminal operator can dynamically change the system control parameters. Although the transaction can be started at any valid IBM 3270 family display device or equivalent termina[...]

introduction Partitions and the execution diagnostic facility The execution diagnostic facility (EDF), invoked by CEDF, is not available in single-screen mode on a terminal in partitioned state. EDF must be used in dual-screen mode for debugging application programs that use partitions. Partitions and the command interpreter The CICS command interp[...]

introduction messages from other terminals and consoles, as well as from CICS transactions. In a system that has consoles and VTAM terminals, a console can remain active when CICS and VTAM are disconnected from each other. You can use the console to make or break the CICS-VTAM connection without CICS being terminated. Use the MODIFY and REPLY comma[...]

introduction where nn is the number of the prompt to which you are replying, and datastring is your reply. If a transaction is purged while it is awaiting a reply from the operator, the reply is canceled. You should note that messages to the console can become interspersed with messages from the operating system and from other regions, making them [...]

introduction 8 CICS Supplied Transactions[...]

CBAM—BTS browser | Chapter 2. CBAM—BTS browser | Use CBAM to browse the CICS business transaction | services (BTS) objects (process-types, processes, activities, | containers, events and timers) known to this region. CBAM is | described in the CICS Business Transaction Services | manual.  Copyright IBM Corp. 1982, 1999 9[...]

CBAM—BTS browser 10 CICS Supplied Transactions[...]

CDBC—database control menu Chapter 3. CDBC—database control menu Use CDBC to connect CICS to DBCTL, or to disconnect CICS from DBCTL. CDBC is applicable only to CICS systems using the IMS/ESA Database Control (DBCTL) interface. For detailed guidance on using the CDBC transaction with databases controlled by DBCTL, see the CICS IMS Database Cont[...]

CDBC—database control menu The following display shows you the effect of asking for option 2: à ð CDBC CICS-DBCTL CONNECTION/DISCONNECTION 93.259 13:39:2 Select one of the following: 1 Connection 2 ORDERLY disconnection 3 IMMEDIATE disconnection Option Selection ==> 2 Startup Table Suffix ==>  DBCTL ID Override ==> DFHDB829[...]

CDBI–database control inquiry Chapter 4. CDBI—database control inquiry Use CDBI to inquire about the status of the interface between CICS and DBCTL. You can start CDBI from 3270 (and 3270-like) terminals or from the operating system console. For detailed information about the CICS-DBCTL interface and guidance on using the CDBI transaction with [...]

CDBI–database control inquiry 14 CICS Supplied Transactions[...]

CDBM–database control interface Chapter 5. CDBM—database control interface Use the CDBM transaction to issue DBCTL operator commands from a CICS terminal. CDBM is applicable only to CICS systems using the IMS/ESA Database Control (DBCTL) interface. | CDBM also provides a means of maintaining a command file | which stores commands. You may store[...]

CDBM–database control interface à ð CDBM CICS-DBCTL IMS Responses Screen 1 Responses 1 to 18 More: + DATABASE TYPE TOTAL UNUSED TOTAL UNUSED ACC CONDITIONS ACCUNTDB UP STOPPED, NOTOPEN, NOTINIT ADMIDX1 UP STOPPED, NOTOPEN, NOTINIT ADMOBJ1 UP STOPPED, NOTOPEN, NOTINIT ADMOBJ2 UP STOPPED, NOTOPEN, NOTINIT ADMOBJ3 UP STOPPED, NOTOPEN, NOTINIT ADMS[...]

CDBM–database control interface | à | ð | CDBM CICS/DBCTL COMMAND GROUP MAINTENANCE | _ ACTION A add B browse D delete R read U update | ____________ GROUP __________ IMS COMMAND | > < | > < | > < | > < | > < | > < | > < | > < | > < | > < | > < | > < | > < | > <[...]

CDBM–database control interface à ð CDBM Help: CICS-DBCTL Operator Transaction CDBM Use the transaction to send an IMS command to a DBCTL system. Command Type the command recognition character / followed by an IMS command and press enter to display responses. Responses Use the PF keys to page IMS responses. Wildcards  or + can be used within[...]

CEBR—temporary storage browse Chapter 6. CEBR—temporary storage browse Use the CEBR transaction to browse temporary storage queues and to delete them. You can also use CEBR to transfer a transient data queue to temporary storage in order to look at its contents, and to recreate the transient data queue when you have finished. The CEBR commands [...]

CEBR—temporary storage browse If you enter CEBR from CEDF, you will return to the EDF panel when you press PF3 from the CEBR screen. à ð CEBR TSQ AXBYQUEUEAME1 SYSID CIJP REC 1 OF  COL 1 OF .1/  ENTER COMMAND ===> .2/  TOP OF QUEUE [...]

CEBT INQUIRE AUXTRACE Chapter 7. CEBT—master terminal (alternate CICS) Use CEBT to control an alternate CICS system in an extended recovery facility (XRF) environment. For information about XRF, see the CICS/ESA 3.3 XRF Guide . You can start this transaction only at the operating system console. Starting a transaction at the system console is des[...]

CEBT INQUIRE DUMP Sto p Auxiliary tracing has stopped. Swi tch displays the information that an immediate switch is being made from the current auxiliary trace data set to the alternate trace data set. CEBT INQUIRE DUMP Function: Retrieve information about the CICS dump data sets. Description: CEBT INQUIRE DUMP tells you which dump data set (A or B[...]

CEBT INQUIRE GTFTRACE  CEBT INQUIRE INTTRACE CEBT INQUIRE GTFTRACE Function: Show the GTF status. Description: CEBT INQUIRE GTFTRACE tells you whether CICS tracing to the MVS Generalized Tracing Facility (GTF) is started or stopped. This command is intended for use at terminals that do not support the CETR full-screen tracing transaction. For in[...]

CEBT INQUIRE SURVEILLANCE  CEBT INQUIRE TAKEOVER CEBT INQUIRE SURVEILLANCE Function: Display whether surveillance (or tracking) of the active CICS system by the alternate CICS system is ON or OFF. Input: Press the Clear key and type CEBT INQUIRE SURVEILLANCE (the minimum abbreviation is CEBT I SU ). To change various attributes, use the CEBT SET[...]

CEBT PERFORM commands  CEBT PERFORM SHUTDOWN CEBT PERFORM commands The CEBT PERFORM commands allow you to:  Shut down the alternate CICS system (CEBT PERFORM SHUTDOWN)  Request a dump of the alternate CICS and continue processing (CEBT PERFORM SNAP)  Cause the alternate CICS to take over from the active CICS (CEBT PERFORM TAKEOVER). Des[...]

CEBT PERFORM SNAP  CEBT PERFORM TAKEOVER CEBT PERFORM SNAP Function: Cause a “snapshot” dump of the alternate CICS system to be taken while CICS continues to run. All CEBT PERFORM SNAP requests result in an SDUMP on an MVS SYS1.DUMPnn data set. The use of CEBT PERFORM SNAP prevents all other tasks from running on the alternate system, and co[...]

CEBT SET AUXTRACE CEBT SET AUXTRACE Function: Change auxiliary tracing options. Description: You can start, stop, or pause tracing, and specify that automatic switching of the auxiliary data set is to occur when needed. You can use the switch option to change the data set. Instead of using the SET command, you can overtype your changes on the INQUI[...]

CEBT SET DUMP  CEBT SET GTFTRACE CEBT SET DUMP Function: Change the attributes of a CICS dump data set. Description: Using CEBT SET DUMP, you can open or close the active CICS dump data set, and specify whether or not the automatic switch to the inactive dump data set is to occur when the active dump data set is full. Instead of using the SET co[...]

CEBT SET INTTRACE  CEBT SET SURVEILLANCE CEBT SET INTTRACE Function: Switch CICS internal tracing on or off. Description: This command is intended for use at terminals that do not support the full-screen tracing transaction CETR. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEBT SET[...]

CEBT SET TAKEOVER CEBT SET TAKEOVER Function: Set takeover from the active CICS system by the alternate CICS system to be automatic, manual, or command-driven. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEBT SET TAKEOVER (the minimum abbreviation is CEBT S T ). You get a display that[...]

CECI/CECS—command-level interpreter Chapter 8. CECI—command-level interpreter Use CECI, which invokes the CICS command-level interpreter, to enter an EXEC CICS command, check its syntax, and modify it if necessary. In most cases, you can also process the command. For programming information on each EXEC CICS command, see the CICS Application Pr[...]

CECI/CECS—command-level interpreter Command-level syntax-checking transaction (CECS) Use the CECS transaction, which also invokes the command-level interpreter, to check the syntax of an EXEC CICS command, but not to process it. Start the transaction by entering CECS on the command line of the screen, as follows: CECS Press ENTER. You get a list [...]

CEDA—resource definition online Chapter 9. CEDA—resource definition online Use CEDA to define resources to your CICS system while the system is running. With CEDA, you can update both the CICS system definition (CSD) file and the running CICS system. Start the transaction by entering CEDA on the command line of the screen. Press ENTER. You get [...]

CEDA—resource definition online If you enter INST on the command line and press ENTER, you get the screen shown in Figure 21 which lists the resources: à ð CEDA INST OVERTYPE TO MODIFY CEDA Install All Connection ==> DB2Conn ==> DB2Entry ==> DB2Tran ==> | DOctemplate ==> | Enqmodel ==> File ==> Journalmodel ==> LSrpool =[...]

CEDA—resource definition online ─ ─ ─CEDA ─────────────────────────────────────────────────────────────────── ─ ─ ─┬ ┬ ─ADD─ ─ ─GROUP( groupname1 )─ ─LIST( name )─ ─┬ ?[...]

CEDA—resource definition online Resource: ├─ ─ ─┬ ┬ ─ ─CONNECTION( name )─ ─ ─ ┤ ├┤ ─ ─DB2CONN( name ) ───── ├┤ ─ ─DB2ENTRY( name ) ──── ├┤ ─ ─DB2TRAN( name ) ───── | ├┤ ─ ─DOCTEMPLATE( name )─ | ├┤ ─ ─ENQMODEL( name ) ──── ├┤ ─ ─FILE( na[...]

CEDA—resource definition online GROUP Every resource definition must have a GROUP name. The resource definition becomes a member of the group and is installed in the CICS system when the group is installed. The GROUP name can be up to 8 characters in length. JOURNALMODEL The name of a journal model containing specifications of journal names. An M[...]

CEDA—resource definition online à ð ALTER TRANS OVERTYPE TO MODIFY CICS RELEASE = 41 CEDA ALter TRANSaction( ) TRANSaction ==> Group ==> DEscription ==> PROGram ==> TWasize ==> -32767 PROFile ==> PArtitionset ==> STAtus ==> Enabled | Disabled PRIMedsize ==> -6552 TASKDATALoc ==> Below | Any TASKDATAK[...]

CEDA—resource definition online à ð Resources, Groups and Lists You use CEDA to create and modify resource definitions. Using the DEFINE command, you specify a resource's type, name and attributes, which are then stored on the CICS System Definition (CSD) file. You can see what types of resource there are by using DEFINE on its own as a co[...]

CEDA—resource definition online CEDB and CEDC Two further resource definition transactions, CEDB and CEDC, allow you to use some, but not all, of the functions of CEDA. CEDB When you use the CEDB transaction, the INSTALL command is not available to you. This means that you can update the CSD, but not the running CICS system. à ð ENTER ONE OF TH[...]

CEDF—execution diagnostic facility Chapter 10. CEDF & CEDX — the execution diagnostic facility The CICS execution diagnostic facility (EDF) provides two transactions that you can use for testing application programs. These transactions—CEDF and CEDX—enable you to test application programs interactively without having to supply special p[...]

CEDF—execution diagnostic facility Beginning an EDF session (dual-screen mode) You can also use EDF in what is known as dual-screen mode ; that is, using one terminal to monitor a transaction running at a second terminal. This mode is started by adding the terminal identifier (termid) of the second terminal to the CEDF command at the first termin[...]

CEDF—execution diagnostic facility ┌ ┐ ─,ON── ─ ─ ─CEDX ─ ─tranid ─ ─┼ ┼ ────── ─ └ ┘ ─,OFF─ Command options OFF specifies that the EDF screen is to be switched OFF. If you specify OFF you must enter the preceding comma, as shown in the following example: CEDX TRNA,OFF ON specifies tha[...]

CEDF—execution diagnostic facility 44 CICS Supplied Transactions[...]

CEMT—master terminal Chapter 11. CEMT—master terminal Use CEMT to invoke all the master terminal functions. The master terminal program provides dynamic user control of the CICS system. By using this function, an operator can inquire about and change the values of parameters used by CICS, alter the status of the system resources, terminate task[...]

CEMT—master terminal If you type: P and press ENTER, you get the following screen: à ð P STATUS: ENTER ONE OF THE FOLLOWING DEletshipped DUmp ENDaffinity RESet SEcurity SHUTdown SNap STatistics Figure 40. CEMT transaction: PERFORM screen If you type: S and press ENTER, you get the following screen: à ð S STATUS: ENTER ONE OF THE FOLLOWING OR [...]

CEMT—master terminal CLASS option When operating on terminals, transactions, and programs, the CLASS option can be used to identify the suffix of a TLT, XLT, or PLT. This limits the scope of the INQUIRE or SET commands to those resources defined in the specified table. Any resources whose definitions have not been installed are displayed as NOT F[...]

CEMT—master terminal The sequence of the positional fields is given in the descriptions of the various CEMT INQUIRE commands. Whenever you overtype a display, not only is that particular action taken but all the status information is refreshed. You can avoid the overhead of a large number of table searches either by using the SET command, or by l[...]

CEMT DISCARD Variables PF5 gives a display of variables, similar to that for the CECI command. Here are some examples of its use. From a FILE display, you may wish to inquire of a particular DSNAME, which is typically 26 characters and can be up to 44 characters in length. Go to the expanded panel, position the cursor on the DSNAME line, and press [...]

CEMT DISCARD and a screen similar to Figure 45 on page 50 appears. Use the carriage return key to move the cursor to the beginning of the line for the resource or resources you want to discard, and type “D” as shown and then press ENTER. à ð IN PROG STATUS: RESULTS - OVERTYPE TO MODIFY D Prog(ABCDTASK) Len(2936) Ass Pro Ena Pri Ced R[...]

CEMT DISCARD Options AUTI nstmodel ( value ) specifies the name of the autoinstall model that is to be removed. The name can be up to 8 characters long. The DISCARD AUTINSTMODEL command removes the installed name of an autoinstall model from the autoinstall terminal model (AITM) table and the CICS catalog. C onnection ( value ) specifies the 4-char[...]

CEMT DISCARD | PROC esstype ( value ) | Specifies the 8–character name of the Processtype to be | removed. Only disabled processtypes can be discarded. | If you are using BTS in a sysplex, it is strongly | recommended that you use CPSM to remove them. PROF ile ( value ) specifies the name of the profile that is to be removed. The name can be up t[...]

CEMT INQUIRE COMMANDS  CEMT INQUIRE AUTINSTMODEL CEMT INQUIRE commands Most CEMT requests either inquire about (INQUIRE), or change (SET) the status of one or more named instances of a resource (such as a terminal), a particular subgroup of resources (such as a class of terminals), or all resources of a particular type (such as all terminals). T[...]

CEMT INQUIRE AUTOINSTALL CEMT INQUIRE AUTOINSTALL Function: Retrieve information about autoinstall values. Description: The INQUIRE AUTOINSTALL command | displays information and parameters that control the | automatic installation (autoinstall) of VTAM terminals, APPC | connections, and MVS consoles. For background information about autoinstall, s[...]

CEMT INQUIRE AUXTRACE P rogram ( value ) displays the name of the program that controls the autoinstall process. This is either the CICS-supplied default autoinstall program, DFHZATDX, or a user-written program. Note: You can reset this value by overtyping it with a different value. CEMT INQUIRE AUXTRACE Function: Retrieve information about the sta[...]

CEMT INQUIRE AUXTRACE à ð I AUX RESULT - OVERTYPE TO MODIFY Auxtrace Curauxds(A) Status( Stop ) Switchstatus( Noswitch ) Switchaction( ) Figure 51. The expanded display of an individual entry ─ ─ ─CEMT Inquire AUXtrace ─ Displayed fields A uxiliary identifies this panel as relating to auxiliary trace. C urauxds ( value ) displ[...]

CEMT INQUIRE CFDTPOOL | CEMT INQUIRE CFDTPOOL | Function: Retrieves information about coupling facility | data table pools. | Description: INQUIRE CFDTPOOL returns information | about any currently installed CFDT pool names. CICS installs | these automatically whenever it installs a file resource | definition that refers to a CFDT. | Input: Press t[...]

CEMT INQUIRE CONNECTION CEMT INQUIRE CONNECTION Function: Retrieve information about system connections. Description: CEMT INQUIRE CONNECTION returns information about the status of connections to a remote system or to another CICS region. You can reset the options either by typing the SET command or by overtyping at the appropriate place on the IN[...]

CEMT INQUIRE CONNECTION If you place the cursor against a specific entry in the list and press ENTER, CICS displays an expanded format as shown in Figure 54 on page 59. à ð IN CONN RESULT - OVERTYPE TO MODIFY Connection(MRO5) Netname(CICSHAA3) Pendstatus( Notpending ) Servstatus( Inservice ) Connstatus( Acquired ) Accessmethod(Irc) Purgetype( ) P[...]

CEMT INQUIRE CONNECTION OB taining (APPC only) The connection is being acquired. The connection remains in the OBTAINING state until all the criteria for ACQUIRED have been met. FR eeing (APPC only) The connection is being released. AV ailable (APPC only) The connection is acquired but there are currently no bound sessions because they were unbound[...]

CEMT INQUIRE CONNECTION L u61 The connection uses the VTAM LUTYPE6.1 protocol for CICS-to-CICS or CICS-to-IMS intersystem communication. P urgetype ( input only field ) specifies how associated transactions are to be purged. The values are: PU rge ( vtam only and irc only ) Transactions running on the connected system are abnormally terminated. Tra[...]

CEMT INQUIRE CONNECTION RNA me ( value ) displays the 4-character name by which this connection is known in a remote system, if the subject of the inquiry is a remote connection. RNE tname ( value ) displays the 8-character netname of the owning TOR, if the subject of this inquiry is a remote connection. If it is blank, but the connection is remote[...]

CEMT INQUIRE DB2CONN CEMT INQUIRE DB2CONN Function: Retrieves information about the CICS DB2 connection. Description: INQUIRE DB2CONN returns information about the attributes of the currently installed DB2CONN, which defines the connection to DB2. Note that because there can be only one DB2CONN installed at a time, the name of the DB2CONN is not re[...]

CEMT INQUIRE DB2CONN Tern The terminal identification (four characters padded to eight) is used as an authorization ID. An authorization ID cannot be obtained in this manner if a terminal is not connected with the transaction. If a transaction is started (using a CICS command) and has no terminal associated with it, AUTHTYPE(TERM) should not be use[...]

CEMT INQUIRE DB2CONN Connectst returns the status of the CICS DB2 connection. The values are: Connected CICS is connected to DB2. Notconnected CICS is not connected to DB2. Connecting CICS is currently attempting to connect to DB2. Disconning CICS is currently disconnecting from DB2. DB2id returns the name of the DB2 subsystem that the CICS DB2 att[...]

CEMT INQUIRE DB2CONN SET DB2CONN. See SECURITY(REBUILD) on page170. Standbymode returns the action to be taken by the CICS DB2 attachment if DB2 is not active when an attempt is made to start the connection from CICS to DB2. The values are: Noconnect The CICS DB2 attachment terminates. Connect The CICS DB2 attachment goes into 'standby mode&ap[...]

CEMT INQUIRE DB2ENTRY CEMT INQUIRE DB2ENTRY Function: Returns the attributes of the DB2ENTRY that defines resources to be used by a specific transaction or by a group of transactions when accessing DB2. Description: The entry is identified by the name with which it was defined in CEDA. Input: For RCTs migrated to the CSD, the name is the name of th[...]

CEMT INQUIRE DB2ENTRY containing multiple UOWs may use a different thread for each UOW. The result may be that an accounting record is produced for each UOW. NO ne No accounting records are required for transactions using threads from this DB2ENTRY. DB2 does, however, produce at least one accounting record for each thread when the thread is termina[...]

CEMT INQUIRE DB2ENTRY DIS abling The DB2ENTRY is in the process of being disabled. New transactions cannot access the DB2ENTRY. Existing transactions using the DB2ENTRY will be allowed to complete unless the DB2ENTRY is being disabled with the FORCE option. PLAN returns the name of the plan to be used for this DB2ENTRY. If PLAN is returned, PLANEXI[...]

CEMT INQUIRE DB2TRAN  CEMT INQUIRE DELETSHIPPED CEMT INQUIRE DB2TRAN Function: Returns attributes of a particular DB2TRAN that associates a transaction or group of transactions with a DB2ENTRY. Description: The DB2TRAN is identified by the name it was defined with in CEDA. For RCTs migrated to the CSD, the name is the same as the transaction for[...]

CEMT INQUIRE DOCTEMPLATE installed in this region. When the CICS timeout delete mechanism is invoked, only those shipped definitions that have been inactive for longer than this time are deleted. The time interval can be in the range 00-99 hours; 00-59 minutes; and 00-59 seconds. Note: You can reset this value by overtyping it with a different valu[...]

CEMT INQUIRE DSAS | DDNAME | returns the DD name of the PDS containing the | template. The DDName applies only to a template of | type PDS. If a membername is supplied without a value | for DDNAME, the default value DFHHTML is used. | DOCTEMPLATE | returns the name of this DOCTEMPLATE definition. | NAME | returns the name of the location defined in[...]

CEMT INQUIRE DSAS SOSABOVE CICS is short on storage in at least one of the dynamic storage areas above 16MB. SOSBELOW CICS is short on storage in at least one of the dynamic storage areas below 16MB. CD sasize ( value ) displays the size, in bytes, of the CICS dynamic storage area (CDSA). The size of this storage area is calculated and managed by C[...]

CEMT INQUIRE DSNAME CEMT INQUIRE DSNAME Function: Retrieve information about an external data set. Description: INQUIRE DSNAME returns information about the status of a data set managed by CICS file control. The data set name is either the name specified on the DSN parameter of the data set’s DD statement, or the DSNAME parameter of the data set?[...]

CEMT INQUIRE DSNAME displayed. The full set of keywords can be displayed by moving the cursor to the beginning of a displayed item (in front of the Dsn field) and pressing the ENTER key. You get a display of all the keyword information for the displayed item, as follows: à ð IN DSN RESULT - OVERTYPE TO MODIFY Dsname(CICSTS13.CICS.CICSH###.DFHCSD)[...]

CEMT INQUIRE DSNAME Notes: 1. This option does not apply to shunted in-doubt UOWs. Try to resolve the shunted in-doubt UOWs that hold locks on the data set in other ways before issuing RESETLOCKS; for example, by using COMMIT, BACKOUT, or FORCE (see the CEMT SET DSNAME command for information about these options). 2. RESETLOCKS can fail during the [...]

CEMT INQUIRE DSNAME serialized by a backup manager such as DFSMS/MVS  before a data set backup copy can be made. D ynamic The data set is accessed in RLS mode and is eligible for BWO processing. Data set backup is allowed while it is open for output, using a data set backup manager such as DFSMShsm  o r DFSMSdss  . 2 N otapplic The data se[...]

CEMT INQUIRE DSNAME Q uiescestate displays the RLS quiesce state of the data set. The information is obtained from the ICF catalog entry for the data set. The values displayed are: Q uiesced A data set has been quiesced. It means that RLS ACBs cannot open against the data set and no CICS region has an RLS ACB currently open against this data set. H[...]

CEMT INQUIRE DUMPDS CEMT INQUIRE DUMPDS Function: Retrieve information about the CICS dump data sets. Description: INQUIRE DUMPDS tells you which dump data set (A or B) is currently open. Instead of using the SET command, you can overtype your changes on the INQUIRE screen after tabbing to the appropriate field. See “Overtyping a display” on pa[...]

CEMT INQUIRE ENQ | CEMT INQUIRE ENQ | Function: Retrieve information about enqueues held or | waited on by a UOW, or about UOWs holding or waiting on a | specified enqueue. | Description: INQUIRE ENQ returns information about the | enqueues held by a UOW. Enqueues are used by CICS to | lock recoverable resources such as file records or queues to | [...]

CEMT INQUIRE ENQ | Displayed fields | D uration ( value ) | displays the elapsed time (in seconds) since the | enqueue f entered its current state of OWNER, WAITER | or RETAINED. | ENQF ails ( value ) | displays, for enqueues held in retained state, the number | of failed enqueue attempts for this resource since the | enqueue was last acquired. Thi[...]

CEMT INQUIRE ENQMODEL | TD q The resource is a logically-recoverable transient | data queue. RESOURCE contains the name of the | queue. QUALIFIER contains either the string | “FROMQ” or “TOQ,” indicating whether a read or | write lock is held for the queue. | A READQ TD request acquires the “FROMQ” lock, | whereas a WRITEQ TD request ac[...]

CEMT INQUIRE EXCI | DISABLED | Matching ENQ requests are rejected, and the issuing | task abended abcode ENQ_DISABLED. Matching | INSTALL/CREATE/DISCARD requests are processed. | ENABLED | Matching ENQ requests are processed in the normal | way. | WAITING | Matching ENQ requests are rejected, and the issuing | task abended abcode ENQ_DISABLED. Ther[...]

CEMT INQUIRE FEPI E xci ( value ) indicates that this panel relates to an EXCI inquiry. The value consists of: jobname.stepname.procname - mvsid One or both of the stepname and procname may not be present, indicated by the periods (.) being adjacent to one another. The mvsid identifies the MVS system on which the job is running. If XCF/MRO is in us[...]

CEMT INQUIRE FILE CEMT INQUIRE FILE Function: Retrieve information about VSAM, BDAM, and remote files, and files that refer to data tables. Description: The values that are returned to you can vary according to when the command is issued. For example, if the file is closed when you issue the command, much of the information you receive tells you th[...]

CEMT INQUIRE FILE by tabbing (they appear in the same sequence as in the expanded format), and overtype with input valid for that field. You may find it more convenient to use the expanded format when setting one of these values, (negating is easier because you are overtyping a displayed field with its negative causing the result to become non-disp[...]

CEMT INQUIRE FILE It indicates that when a file is next opened, its data is erased. NOEM ptyreq Applies only to VSAM files. It indicates that when a file is next opened, its data is not erased. Note: You can reset this value by overtyping it with a different value. E nablestatus displays whether transactions can access the file. The values are: EN [...]

CEMT INQUIRE FILE |  If the value is changed again by a coupling | facility data table server command, CICS | obtains and displays the new value only after a | file control operation on the table. Until then, | CICS continues to display the old value. |  You can use the server DISPLAY TABLE | console command to obtain the current value | for [...]

CEMT INQUIRE GTFTRACE | U pdatemodel (CFDT only) | displays the update model specified for the coupling | facility data table in the installed file definition. The | values are: | CONTENTION | The coupling facility data table is updated using | the contention model. | LOCKING | The coupling facility data table is updated using | the locking model. [...]

CEMT INQUIRE INTTRACE  CEMT INQUIRE IRBATCH CEMT INQUIRE INTTRACE Function: Show the status of CICS internal tracing. Description: INQUIRE INTTRACE tells you whether CICS internal tracing is in progress. This command is intended for use at terminals that do not support the full-screen tracing transaction CETR. Input: Press the Clear key and type[...]

CEMT INQUIRE IRC CEMT INQUIRE IRC Function: Show the IRC status. Description: INQUIRE IRC tells you whether the interregion communication (IRC) facility is open or closed. Input: Press the Clear key and type CEMT INQUIRE IRC (the minimum abbreviation is CEMT I IRC ). You will get a display screen, a sample of which is shown below. Sample screen à [...]

CEMT INQUIRE JMODEL CEMT INQUIRE JMODEL Function: Retrieve information about journal models and log stream names. Description: The INQUIRE JMODEL command enables you to inquire on installed journal models to obtain corresponding log stream names. Input: Press the CLEAR key to clear the screen. There are two ways of commencing this transaction:  [...]

CEMT INQUIRE JOURNALNAME CEMT INQUIRE JOURNALNAME Function: Show the status of the CICS system log and general logs. Description: The INQUIRE JOURNALNAME command enables you to inquire on the status of the CICS system log and general logs. It replaces the INQUIRE JOURNALNUM command. Input: Press the CLEAR key to clear the screen. There are two ways[...]

CEMT INQUIRE LINE ST reamname ( value ) displays the MVS log stream name associated with the journal. CICS displays 8 blanks (X ' 40 ' ) if the journal is defined with a type of DUMMY or SMF. T ype displays the type of log stream. The possible types are: M vs Records for journals defined with this journal model are written to an MVS log s[...]

CEMT INQUIRE MODENAME à ð INQ LINE(TTT1) RESULT Line(TTT1) Number() Negpoll( 8 ) Servstatus( Inservice ) Purgetype( ) Figure 86. The expanded display Displayed fields I nservice The line is available for use. Changing the status of the line does not affect the equivalent status of the terminals on it. L ine ( value ) indicates that th[...]

CEMT INQUIRE MODENAME Note: There are blank fields on the screen where a value does not apply or is ‘negative’; that is, the value begins with ‘No’. To modify these fields, locate them by tabbing (they appear in the same sequence as in the expanded format), and overtype with input valid for that field. You may find it more convenient to use[...]

CEMT INQUIRE MONITOR CEMT INQUIRE MONITOR Function: Retrieve information about the status of CICS monitoring. Description: INQUIRE MONITOR tells you whether monitoring is switched on or off, which classes of monitoring data are to be collected, and the current settings of the monitoring options. Input: Press the Clear key to clear the screen, and t[...]

CEMT INQUIRE MONITOR P erfclass displays whether the performance class of monitoring data is being collected. The values are: P erf Performance-class monitoring data is being collected. N operf Performance-class monitoring data is not being collected. Note: You can reset this value by overtyping it with a different value. S tatus displays whether m[...]

CEMT INQUIRE NETNAME CEMT INQUIRE NETNAME Function: Retrieve information about a network. Description: If you are familiar with network names, you may prefer to use this command as an alternative to CEMT INQUIRE TERMINAL. Input: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT INQUIRE NETNAME[...]

CEMT INQUIRE NETNAME CI d ( value ) displays an 8-character correlation-identifier that is set only for sessions, and only after a session has been acquired. (The value relates to the previously acquired session if there was one, if the session is not acquired). CID is set as follows:  For LU6.2 sessions, it is an 8-character hexadecimal token w[...]

CEMT INQUIRE NETNAME P urgetype ( input only field ) specifies whether the transactions running with the named terminal are to be purged. The values are: PU rge Transactions are to be terminated only if system and data integrity can be maintained. A transaction is to be purged if its definition specifies SPURGE=NO. F orcepurge Transactions are to b[...]

CEMT INQUIRE PARTNER NOT ti This terminal cannot be used by transactions. Notes: 1. You can reset this value by overtyping it with a different value. 2. A terminal cannot be defined with both NOATI and NOTTI. U serid ( data-area ) returns the 8-character identifier of the user signed on at this terminal or session. If there is no signed-on user, th[...]

CEMT INQUIRE PROCESSTYPE à ð I PART RESULT Partner(IST1ISC2) Network() Netname(IYMVM2) Profile(DFHCICSA) Ltpname(4) Tpname(IST1) Figure 94. The expanded display of an individual entry Displayed fields L tpname ( value ) displays the length of the name of the remote transaction program (TPNAME), in bytes. NETN ame ( value ) displays the 8-chara[...]

CEMT INQUIRE PROCESSTYPE | à | ð | I PROC | STATUS: RESULTS - OVERTYPE TO MODIFY | Pro(PROCESSTYPE12 ) Fil(FILE12 ) Aud(ADTLOG12) Pro Ena | Pro(PROCESSTYPE13 ) Fil(FILE13 ) Aud(ADTLOG12) Off Ena | Pro(PTYPE2B ) Fil(FILE2B ) Aud(DFHJ2B ) Ful Ena | Pro(PTYPE39 ) Fil(FILE39 ) Aud(DFHJ39 ) Off Ena | Pro(SALESTYPE1 ) Fil(SALESF1 ) Aud(PLOG51 ) Off Dis[...]

CEMT INQUIRE PROFILE  CEMT INQUIRE PROGRAM CEMT INQUIRE PROFILE Function: Retrieve information about a transaction profile. Description: INQUIRE PROFILE returns information about the profiles installed in your system. There is no SET PROFILE function. However, the INQUIRE PROFILE screen does allow you to type a “D”. in the left-hand margin b[...]

CEMT INQUIRE PROGRAM ┌ ┐ ─ALl────────── ─ ─ ─CEMT Inquire PROGram ─ ─┼ ┼ ────────────── ──── ├┤ ─ ─( value ) ───── └┘ ─ ─CLass( value ) ─ ─ ─┬ ┬ ─────────────── ─ ─┬ ┬ ──────?[...]

CEMT INQUIRE PROGRAM Displayed fields C edfstatus displays what action the execution diagnostic facility (EDF) is to take for this program when the program runs under EDF. The values are: CED f When EDF is active, CEDF initiation and termination screens are shown by CEDF while this program is running. Other screens are also shown unless the program[...]

CEMT INQUIRE PROGRAM | can route the request to the region on which the | program is to execute. | NOTDY namic | If the program is the subject of a program-link | request, the dynamic routing program is not | invoked. | For a distributed program link (DPL) request, the | server region on which the program is to execute | must be specified explicitl[...]

CEMT INQUIRE PROGRAM PA rtitionset The entry is defined in the CICS system definition as a partition set. REM otesystem ( value ) displays the 4-character name of the remote system in which the program is to execute. RES count ( value ) displays a 3-character string identifying the number of separate invocations of this program that are taking | pl[...]

CEMT INQUIRE REQUESTMODEL  CEMT INQUIRE RRMS | CEMT INQUIRE REQUESTMODEL | Function: Retrieves information about a | REQUESTMODEL | Description: INQUIRE REQUESTMODEL returns | information about any currently installed Request models. | Input: Press the Clear key to clear the screen, and type | CEMT INQUIRE REQUESTMODEL (the minimum abbreviation [...]

CEMT INQUIRE STATISTICS CEMT INQUIRE STATISTICS Function: Retrieve statistics information. Description: INQUIRE STATISTICS tells you the interval during which statistics are accumulated, the end-of-day time for shutdown (or logical end-of-day) statistics, the time at which statistics are next recorded (that is, written to an SMF data set), and whet[...]

CEMT INQUIRE STATISTICS Note: In this example, there would have been an interval at 0800 hours if CICS had been initialized earlier. If you want your end-of-day recordings to cover 24 hours, set INTERVAL to 240000. N exttime ( hhmmss ) displays the time at which statistics are next recorded and reset. This is the expiry time of the current interval[...]

CEMT INQUIRE STREAMNAME CEMT INQUIRE STREAMNAME Function: Retrieve information about currently connected MVS log streams. Description: The INQUIRE STREAMNAME command allows you to inquire on the currently connected MVS log streams. Input: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT INQUI[...]

CEMT INQUIRE SYDUMPCODE CEMT INQUIRE SYDUMPCODE Function: Retrieve information about the system dump code table. Description: INQUIRE SYDUMPCODE allows you to see the current settings of the entries in the system dump table. ‘NO’ settings (NOSYSDUMP, for example) are shown as blank. The INQUIRE command tells you:  The system dump code or mes[...]

CEMT INQUIRE SYDUMPCODE A ction ( input only field ) specifies the action to be taken with this system dump code. The values are: R eset The current number of calls for this dump code is reset to zero. R emove This system dump code is removed from the system dump code table. A dd This system dump code is added to the system dump code table. C urren[...]

CEMT INQUIRE SYSTEM CEMT INQUIRE SYSTEM Function: Retrieve information about CICS. Description: INQUIRE SYSTEM returns information about the CICS system. Input: Press the Clear key to clear the screen, and type CEMT INQUIRE SYSTEM (the minimum abbreviation is CEMT I SYS ). You get a display that lists the current status. You can then tab to the hig[...]

CEMT INQUIRE SYSTEM | DT rprogram ( pgrmid ) | displays the name of the dynamic routing program. | Note: You can reset this value by overtyping it with a | different value. ED salimit ( value ) displays the maximum amount of storage, as a total number of bytes, within which CICS can dynamically allocate storage for the four individual DSAs that res[...]

CEMT INQUIRE SYSTEM AUTOA ctive Autoinstall for programs is active. On first use, if a program, mapset, or partitionset is not defined, the definition is created dynamically. AUTOI nactive Autoinstall is not active. If a program is not defined, a PGMIDERR or transaction abend occurs when it is referenced. Note: You can reset this value by overtypin[...]

CEMT INQUIRE TASK T ime ( value ) displays the interval, in milliseconds, for which CICS releases control to the operating system if no transactions are ready to resume processing. This interval is known as the ‘region exit interval’. Notes: 1. You can reset this value by overtyping it with a different value. It can have a value in the range 10[...]

CEMT INQUIRE TASK ┌ ┐ ─ALl─────────── ─ ─ ─CEMT Inquire TAsk ─ ─┼ ┼ ─────────────── ────── ├┤ ─ ─( value ) ────── └┘ ─ ─TClass( value ) ─ ─ ─┬ ┬ ─────────────── ─ ─┬ ┬ ───?[...]

CEMT INQUIRE TASK TA sk The task was initiated from another task. TE rm The task was initiated from a terminal. DE st The task was initiated by a destination trigger level as defined in the destination control table (DCT). HTI me ( value ) displays the time (in seconds) that the task has been in the current suspended state. HTY pe ( value ) display[...]

CEMT INQUIRE TASK task is in a terminal read on a BTAM nonlocal terminal and that task is canceled, it can require input from another terminal on the same line before the cancel operation completes. R unstatus displays the status of this task. The values are: R unning The task is running. DI spatchable The task is dispatchable. SU spended The task [...]

CEMT INQUIRE TCLASS CEMT INQUIRE TCLASS Function: Retrieve information about tasks within a task class. Description: INQUIRE TCLASS returns information about the current and maximum number of tasks, the purge threshold, and the status of a user-defined task class. Input: Press the Clear key to clear the screen. There are two ways of commencing this[...]

CEMT INQUIRE TCPIP  CEMT INQUIRE TCPIPSERVICE | CEMT INQUIRE TCPIP | Function: Inquire about CICS internal TCP/IP support | status. | Description: INQUIRE TCPIP returns information about | the current status of CICS internal TCP/IP support. | Input: Press the Clear key to clear the screen. There are | two ways of commencing this transaction: | ?[...]

CEMT INQUIRE TCPIPSERVICE | Backlog | Change the maximum number of requests which can be | queued in TCP/IP waiting to be processed by the | service. | Closetimeout | returns a fullword value containing the number of | seconds specified for the timeout period. This can be 0 | through 86400 (24 hours). | Connection | The number of current sockets co[...]

CEMT INQUIRE TDQUEUE CEMT INQUIRE TDQUEUE Function: Retrieve information about transient data queues. Description: INQUIRE TDQUEUE returns information about a named transient data queue that is defined in the destination control table (DCT). Input: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type [...]

CEMT INQUIRE TDQUEUE If the system cannot find volume information for the data set on the DD statement, in the catalog, or passed with the data set from a previous step, the system assumes that the data set is being created in this job step. For a new data set, MOD causes the read/write mechanism to be positioned at the beginning of the data set. E[...]

CEMT INQUIRE TDQUEUE TRI ggerlevel ( value ) (intrapartition queues only) displays the number of requests for output to a queue that must accrue before automatic transaction initiation (ATI) occurs. Note: You can reset this value by overtyping it with a different value. The number can be between 0 and 32767. T ype displays the type of this transien[...]

CEMT INQUIRE TERMINAL CEMT INQUIRE TERMINAL Function: Retrieve information about terminals. Description: INQUIRE TERMINAL returns information about a named terminal defined in the terminal control table (TCT). In an SNA environment, a terminal is the CICS representation of an SNA logical unit with which CICS can be in communication. (SNA environmen[...]

CEMT INQUIRE TERMINAL à ð IN TERM STATUS: RESULTS - OVERTYPE TO MODIFY Ter(CBRF) Pri(  ) Pag Ins Ati Tti Rte Net(CBRF ) Rem(CBR ) Rna(CBRF) Ter(CERR) Pri(  ) Pag Ins Tti Loc | Con(ERRCON ) Ter(CTSO) Pri(  ) Pag Ins Tti Loc | Con(PKING ) | Ter(KING) Pri(  ) Pag Ins Tti Loc | Con(PRUEKING ) | Ter(RNAL) Pri([...]

CEMT INQUIRE TERMINAL CR eate If the terminal is not in session, CICS acquires it if it is needed to satisfy an ATI request. NOC reate If the terminal is not in session, CICS does not acquire it to satisfy an ATI request. A session must be started by, for example, a logon request or a CEMT SET TERMINAL ACQUIRED command before the ATI request can be[...]

CEMT INQUIRE TERMINAL O utservice The terminal is not available for use. Setting a terminal Out(service) means that the terminal can no longer be used by transactions. If PURGE or FORCEPURGE is also specified, any transaction using the terminal is terminated abnormally. If PURGE or FORCEPURGE is not specified, the transaction is allowed to terminat[...]

CEMT INQUIRE TRANSACTION CEMT INQUIRE TRANSACTION Function: Retrieve information about transactions. Description: INQUIRE TRANSACTION returns information about transaction definitions. Input: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT INQUIRE TRANSACTION (the minimum abbreviation is CEM[...]

CEMT INQUIRE TRANSACTION IN doubtmins ( value ) displays the length of time, in minutes, after a failure during the in-doubt period, before the transaction is to take the action returned in the Indoubt field. The returned value is valid only if the unit of work is in-doubt and Indoubtwait returns WAIT. See also Indoubt and Indoubtwait. I ndoubt dis[...]

CEMT INQUIRE TRANSACTION | NOTR outable | If the transaction is the subject of a START | command, it will be routed using the “traditional” | method. | R outable | If the transaction is the subject of an eligible | START command, it will be routed using the | enhanced method. | For details of the enhanced and “traditional” methods of | rout[...]

CEMT INQUIRE TRDUMPCODE CEMT INQUIRE TRDUMPCODE Function: Retrieve information about transaction dump codes. Description: The INQUIRE function allows you to see the current settings of the entries in the transaction dump table. See the CICS Problem Determination Guide for information on using dumps. Note: SHUTDOWN and MAXIMUM must not be used in th[...]

CEMT INQUIRE TRDUMPCODE D umpscope displays whether a system dump request is to be sent to MVS images in the sysplex which are running XCF/MRO connected CICS regions related to the CICS region on which the dump is initiated. Note: A related CICS region is one in which the unit of work identifiers, in the form of APPC tokens, of one or more tasks ma[...]

CEMT INQUIRE TSMODEL | CEMT INQUIRE TSMODEL | Function: Retrieve information about TS models. | Description: The INQUIRE TSMODEL command returns | information about temporary storage models (TS models). | Input: Press the Clear key to clear the screen. There are | two ways of commencing this transaction: |  Type CEMT INQUIRE TSMODEL (the minimum[...]

CEMT INQUIRE TSPOOL | TS model ( value ) | indicates that this panel relates to a TSMODEL inquiry | and displays the 8-character name of a temporary | storage model. | Note: Nondisplayable characters appear as periods. | You can use PF2 on the expanded panel to see | the value in hexadecimal. | CEMT INQUIRE TSPOOL | Function: Retrieve information a[...]

CEMT INQUIRE TSQUEUE / TSQNAME | Displayed fields | C onnstatus ( value ) | displays the connection status of this TS pool. The | values are: | C onnected | This TS pool is connected. | U nconnected | This TS pool is not connected. | T spool ( value ) | indicates that this panel relates to a TSPOOL inquiry | and displays the 8-character name of a t[...]

CEMT INQUIRE TSQUEUE / TSQNAME ┌ ┐ ─ALl───── | ─ ─ ─CEMT Inquire TSQueue ─ ─┼ ┼ ───────── ───────── └┘ ─ ─( value ) ─ ─ ─┬ ┬ ───────────────── ─ ─┬ ┬ ───────────────── ───?[...]

CEMT INQUIRE UOW MAI n The temporary storage queue is held in main storage. MAX itemlen ( value ) displays the length in bytes of the largest item in the temporary storage queue. For information about how CICS calculates the length of items, see the CICS System Programming Reference . MI nitemlen ( value ) displays the length in bytes of the smalle[...]

CEMT INQUIRE UOW ┌ ┐ ─ALl───── ─ ─ ─CEMT Inquire UOW ─ ─┼ ┼ ───────── ───────────── └┘ ─ ─( value ) ─ ─ ─┬ ┬ ────────── ─ ─┬ ┬ ───────── ────────────────── ├ ?[...]

CEMT INQUIRE UOW TE rmid ( value ) displays the 4-character ID of the terminal from which this UOW was started. This is the principal facility for the task. If the transaction is the mirror transaction, CSMI, it is the session. TR ansid ( value ) displays the 4-character ID of the transaction that started this UOW. U owstate displays the state of t[...]

CEMT INQUIRE UOWDSNFAIL distributed UOW. Values of WAITFORGET or WAITRMI, and BACKOUT or COMMIT indicate how the UOW was resolved on this system. SH unted Syncpoint processing of the UOW has been deferred. SHUNTED further indicates that the task, terminal and program storage have been released, and locks have been retained. CEMT INQUIRE UOWDSNFAIL [...]

CEMT INQUIRE UOWDSNFAIL ─ ─ ─CEMT Inquire UOWDsnfail ─ ─UOw( value ) ─────── ─ ─ ─DSname( value )─ ─┬ ┬ ──────── ────────────────── ├ ┤ ─NOtrls─ └ ┘ ─RLS──── ─ ─ ─┬ ┬ ──────────── ─ ?[...]

CEMT INQUIRE UOWDSNFAIL See the section on moving data sets in the CICS Recovery and Restart Guide . DEA dlock ( non-rls data sets only ) A deadlock was detected. This may go away if the UOW is retried. DEL exiterror Backout of a write to an ESDS failed because a logical delete global user exit program was not enabled, or a logical delete global us[...]

CEMT INQUIRE UOWENQ R lsaccess displays whether the data set was last opened in this CICS region in RLS or non-RLS mode. The values are: RLS The last open in this CICS region was in RLS mode. NO trls The last open in this CICS region was in non-RLS mode. S ysid ( value ) displays the 4-character sysid (when the cause is CONNECTION) of the remote sy[...]

CEMT INQUIRE UOWENQ ─ ─ ─CEMT Inquire UOWEnq ─ ─┬ ┬ ──────────── ─────── └┘ ─ ─Uow( value ) ─ ─ ─┬ ┬ ──────────────── ─ ─┬ ┬ ─────────────── ────── └┘ ─ ─TRansid( value )└ ?[...]

CEMT INQUIRE UOWENQ RL en ( value ) displays the length of the data, in the range 0 through 255, displayed in the RESOURCE field. RES ource ( value ) displays a 1- through 255-character string containing the name of the resource associated with the enqueue lock. The data displayed depends on the type of enqueue, as shown in Table 3. Note: Nondispla[...]

CEMT INQUIRE UOWLINK CEMT INQUIRE UOWLINK Function: Retrieve information about connections involved in units of work. Description: INQUIRE UOWLINK returns information about a connection involved in a unit of work. The connection can be to a remote system, or to a task-related user exit. If it is to a remote system, INQUIRE UOWLINK displays the netn[...]

CEMT INQUIRE UOWLINK AP pc Advanced Program to Program Communication. LU 61 LUTYPE 6.1. | R rms | indicates that the UOW is coordinated by | RRS/MVS. RE syncstatus displays the resynchronization status of the connection. The values are: COL d The connection has been cold started by the partner system. The partner can no longer coordinate any in-dou[...]

CEMT INQUIRE VTAM CEMT INQUIRE VTAM Function: Inquire on the state of the connection between CICS and VTAM. Description: INQUIRE VTAM inquires on the state of the connection between CICS and VTAM, and also on the generic resource name (GRNAME) and the persistent session delay interval (PSDI). Input: Press the Clear key and type CEMT INQUIRE VTAM (t[...]

CEMT INQUIRE WEB H hmmss If CICS fails, sessions are held in recovery-pending state by VTAM for up to the interval specified. V tam indicates that this panel relates to a VTAM inquiry. | CEMT INQUIRE WEB | Function: Retrieve information about CICS Web support. | Description: INQUIRE WEB returns information about the | state of CICS Web support. | I[...]

CEMT PERFORM commands  CEMT PERFORM DELETSHIPPED CEMT PERFORM commands The CEMT PERFORM commands are not concerned with resource status. They are used to:  Cause the CICS timeout delete mechanism to be invoked immediately (PERFORM DELETSHIPPED)  Dump and continue processing (PERFORM DUMP or PERFORM SNAP) |  End an affinity owned by CICS[...]

CEMT PERFORM DUMP|SNAP  CEMT PERFORM ENDAFFINITY CEMT PERFORM DUMP|SNAP Function: Obtain a CICS system dump. Description: To get a CICS system to dump and continue processing, you can use either the CEMT PERFORM DUMP command or the CEMT PERFORM SNAP command. Both commands produce a “snapshot” of the CICS system. The use of CEMT PERFORM DUMP [...]

CEMT PERFORM RESET  CEMT PERFORM SECURITY CEMT PERFORM RESET Function: Synchronize the CICS date and time-of-day with the system date and time-of-day. This command should be executed following a change to the system date or to the time-of-day. For example, when setting clocks forward or back an hour to adjust for Summer and Winter time, use this[...]

CEMT PERFORM SHUTDOWN CEMT PERFORM SHUTDOWN Function: Shut down the CICS region. The shutdown can be either controlled or immediate. Syntax ─ ─ ─CEMT Perform SHUTdown ─ ─┬ ┬ ──────────── ───── └┘ ─ ─Xlt( value ) ─ ─ ─┬ ┬ ──────────── ─ ─┬ ┬[...]

CEMT PERFORM STATISTICS CEMT PERFORM STATISTICS Function: Write the statistics for a named resource type immediately to the SMF data set, rather than wait for the current statistics-gathering interval to expire. The recording is made irrespective of the ON or OFF setting of statistics. See also page “CEMT INQUIRE STATISTICS” on page 111 and pag[...]

CEMT SET COMMANDS RES etnow The statistics counters are to be reset. STA ts Statistics domain statistics are to be written immediately to the SMF data set. STO rage Storage manager statistics are to be written immediately to the SMF data set. STR eamname Log stream statistics are to be written immediately to the SMF data set. SY sdump System dump s[...]

CEMT SET AUTOINSTALL CEMT SET AUTOINSTALL Function: Change autoinstall values. Description: The CEMT SET AUTOINSTALL command | allows you to change some of the values that control the | automatic installation (autoinstall) of VTAM terminals and | MVS consoles. For information about autoinstall, see the CICS Resource Definition Guide . Syntax: Press[...]

CEMT SET AUXTRACE CEMT SET AUXTRACE Function: Change auxiliary tracing options. Description: For more information about traces, see the CICS Problem Determination Guide . See also the description of the CETR transaction, Chapter 16, “CETR—trace control” on page 221. Syntax: Press the Clear key to clear the screen. There are two ways of commen[...]

CEMT SET CONNECTION CEMT SET CONNECTION Function: Change the status of connections linked to specific terminals. Description: When a connection has been defined as INDIRECT, no information is given unless the direct connection to which it refers is installed. If you want to install a new connection definition when one is already installed, you must[...]

CEMT SET CONNECTION All UOWs shunted due to the failure of this connection are to be committed. The normal resynchronization process is to be partially overridden: decisions are taken for any units of work that are in-doubt due to a failure of the connection; but the decisions are recorded and any data inconsistencies are reported when the connecti[...]

CEMT SET CONNECTION circumstances. It erases recovery information and may compromise data integrity for units of work that have updated resources on remote systems. Examples of circumstances in which you might need to use it are:  You need to discard a connection, or issue a SET CONNECTION ENDAFFINITY command, and it is not possible for the quie[...]

CEMT SET CONNECTION REL eased ( appc only ) specifies whether CICS is to release a session with the logical unit represented by the CONNECTION name. To get more detailed information about the availability status of the connection elements, use the CEMT INQUIRE MODENAME command. RES ync ( mro to CICS Transaction Server for OS/390 and later systems a[...]

CEMT SET DB2CONN CEMT SET DB2CONN Function: Set attributes of the CICS DB2 connection including the pool and command thread attributes. Syntax: Press the Clear key to clear the screen. To commence this transaction:  Type CEMT SET DB2CONN (the minimum abbreviation is CEMT S DB2C ). You get a display that lists the current status, similar to that [...]

CEMT SET DB2CONN is terminated. Additionally, authorization changes cause accounting records to be produced. AUTHI d specifies what id should be used for security checking for pool threads. If AUTHID is specified, AUTHType may not be specified. AUTHT ype specifies the type of ID that can be used for pool threads. If AUTHType is specified AUTHID may[...]

CEMT SET DB2CONN CTERM Specifies the terminal identification (four characters padded to eight) as an authorization ID. An authorization ID cannot be obtained in this manner if a terminal is not connected with the transaction. If a transaction is started (using a CICS command) and has no terminal associated with it, the COMAUTHTYPE(TERM) should not [...]

CEMT SET DB2CONN PLANE xitname specifies the name of the dynamic plan exit to be used for pool threads. If you change the PLAN and PLANExitname while there are active transactions for the pool, the next time the transaction releases the thread, the plan/exit will be determined using the new rules. If PLANExitname is specified, PLAN may not be speci[...]

CEMT SET DB2ENTRY Note that when you change the value of AUTHId, AUTHType, COMAUTHId, COMAUTHType or SIgnid, a surrogate user security check is invoked if security is active. This ensures that the userid under which SET is being executed is authorized to act on behalf of the userid being set. Note that when the SET DB2CONN command is specified all [...]

CEMT SET DB2ENTRY ──CEMT Set DB2Entry─ ─ ─┬ ┬ ───────────── ──────── └┘ ─ ─( data-area ) ┌ ┐ ── ─────────────────────────── ─ ─ ──  ┴ ┬┬ ───────────────────?[...]

CEMT SET DB2ENTRY TERM Specifies the terminal identification (four characters padded to eight) as an authorization ID. An authorization ID cannot be obtained in this manner if a terminal is not connected with the transaction. If a transaction is started (using a CICS command) and has no terminal associated with it, AUTHTYPE(TERM) should not be used[...]

CEMT SET DB2TRAN THREADWAIT parameter on the DB2CONN. The transaction is terminated with abend code AD3T. All parameters on SET DB2ENTRY can be set whilst the CICS DB2 attachment is active and the transactions are active. CEMT SET DB2TRAN Function: specify this to set the attributes of a particular DB2TRAN associated with a DB2ENTRY. Description: T[...]

CEMT SET DELETSHIPPED CEMT SET DELETSHIPPED Function: Change system settings that control the CICS timeout delete mechanism. Syntax: The CICS timeout delete mechanism is invoked at user-specified intervals to remove any shipped terminal definitions that have not been used for longer than a user-specified time. SET DELETSHIPPED allows you to change [...]

CEMT SET DSAS  CEMT SET DSNAME CEMT SET DSAS Function: Change the system storage attributes. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET DSAS . You get a display that lists the current status, similar to that obtained by CEMT INQUIRE DSAS. You can then tab to the highlight[...]

CEMT SET DSNAME Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET DSNAME (the minimum abbreviation is CEMT S DSN ) with either a value corresponding to a data set name or ‘ALL’. You get a display that lists the current status, similar to that obtained by CEMT INQUIRE DSNAME. Yo[...]

CEMT SET DSNAME If the BWO attributes are not updated after the restore of a backup copy of a data set that was taken using BWO, CICS fails a subsequent file open because the data set is marked as down-level. REMO ve This option is used when a data set is no longer required on the local system. It deletes the data set name block for the named data [...]

CEMT SET DUMPDS  CEMT SET ENQMODEL CEMT SET DUMPDS Function: Change the attributes of a CICS dump data set. Description: Using SET DUMPDS, you can open or close the active CICS dump data set, and specify whether or not the automatic switch to the inactive dump data set occurs when the active dump data set is full. For more information about dump[...]

CEMT SET FEPI  CEMT SET FILE CEMT SET FEPI Comments: For information on CEMT SET FECONNECTION, CEMT SET FEPOOL, CEMT SET FEPROPSET, and CEMT SET FETARGET, see the CICS Front End Programming Interface User's Guide . CEMT SET FILE Function: Change some of the attributes of one or more VSAM or BDAM files. Syntax: Press the Clear key to clear t[...]

CEMT SET FILE ─ ─ ─CEMT Set FIle ─ ─┬ ┬ ─ ─( value ) ──────────────── └ ┘ ─ALl───── ─ ─ ─┬ ┬ ──────────── ─ ─┬ ┬ ────────── ─ ─┬ ┬ ──────── ─── ├ ┤ ─OPen──────[...]

CEMT SET FILE EM ptyreq ( vsam only ) Applies only to a VSAM file that has been defined to VSAM as a cluster with the REUSE parameter, and which is opened in non-RLS access mode. It indicates that when a file is next opened, its data is erased. If the file is opened in RLS access mode this parameter has no effect. A CEMT SET FILE EMPTYREC command c[...]

CEMT SET FILE | NOL oad | The coupling facility data table does not require loading | from a source data set. It is fully usable as soon as it is | created, and is populated entirely by the transactions | that use it. NOR ead You cannot read records in the file. NOTR ls ( vsam only ) The file is defined to be accessed in a non-RLS mode (LSR or NSR)[...]

CEMT SET GTFTRACE  CEMT SET INTTRACE CEMT SET GTFTRACE Function: Change the status of GTF tracing Description: SET GTFTRACE allows you to switch CICS tracing to the MVS Generalized Tracing Facility (GTF) on and off. This command is intended for use at terminals that do not support the CETR full-screen tracing transaction. For guidance on using G[...]

CEMT SET IRC CEMT SET IRC Function: Open or close the interregion communication (IRC) facility. Description: New MRO connections can be installed without first closing IRC. However, if you want to modify existing MRO connections, IRC must be closed using the SET IRC CLOSED command. For example: CEMT SET IRC CLOSED CEDA INSTALL GROUP(groupname) CEMT[...]

CEMT SET JOURNALNAME  CEMT SET LINE CEMT SET JOURNALNAME Function: Enable or disable a CICS user journal. Description: The SET JOURNALNAME command allows you to enable or disable a CICS user journal. It has no effect on a journal that is being used as the forward recovery log or auto-journal for a VSAM file until the next time the file is opened[...]

CEMT SET MODENAME (DFHTEP) when a CICS task is not ready to accept a record from an input process queue. If the CICS task issues a read before the interval expires, processing continues normally and DFHTEP is not notified. The default value is zero. NU mber ( value ) specifies the relative line number of a pooled line. It is mandatory when inquirin[...]

CEMT SET MONITOR AV ailable ( value ) specifies the maximum number of sessions within the group that can be concurrently allocated for use. This value has to be the same for both sides involved in the session. CL osed CICS is to release all sessions within the group. The sessions are quiesced and unbound. No further sessions can be acquired by anot[...]

CEMT SET MONITOR even though, when it started and when it ended, the performance class was set to PERF. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET MONITOR (the minimum abbreviation is CEMT S MON ). You get a display that lists the current status, similar to that obtained by [...]

CEMT SET NETNAME CEMT SET NETNAME Function: Change the status of networks. Description: If you are familiar with network names, you may prefer to use this command as an alternative to CEMT SET TERMINAL (described under “CEMT SET TERMINAL” on page 204). However, CEMT SET NETNAME cannot be used for APPC sessions. “netname” is the name by whic[...]

CEMT SET PROCESSTYPE If NOCREATE is set for an LU6.1 ISC session and there are no allocatable sessions left, the connection is placed OUTSERVICE. NOT ti ( vtam only ) This terminal cannot be used by transactions. Note: A terminal cannot be defined with both NOATI and NOTTI. O utservice ( vtam only ) The terminal is not available for use. Setting a [...]

CEMT SET PROGRAM | For details of the records that are written from the | process, activity primary, and activity secondary audit | points, see the CICS Business Transaction Services | manual. | ALl | specifies that any changes you specify are made to all | process-types that you are authorized to access. | Enabled Disabled | specifies whether new [...]

CEMT SET PROGRAM CED f When EDF is active, CEDF initiation and termination screens are to be shown by CEDF while this program is running. Other screens are also to be shown unless the program was translated using the NOEDF translator option. CL ass ( value ) specifies the 2-character suffix of a program list table (PLT). Use this option to inquire [...]

CEMT SET QUEUE  CEMT SET STATISTICS CEMT SET QUEUE Comments: See “CEMT SET TDQUEUE” on page 203. (QUEUE is accepted for INQUIRE commands, but the correct keyword is TDQUEUE.) CEMT SET STATISTICS Function: Change statistics attributes. Description: SET STATISTICS allows you to change some of the values that control the accumulation and record[...]

CEMT SET STATISTICS I nterval ( hhmmss ) specifies the length of time during which the statistics counters are incremented. At the end of each interval, the accumulated statistics are recorded and the statistics counters are reset. Interval times must be in the range 000100-240000. The default interval value is 030000. These interval settings only [...]

CEMT SET SYDUMPCODE CEMT SET SYDUMPCODE Function: Change the attributes of the system dump codes. Description: SET SYDUMPCODE allows you to define the entries that you require in the system dump table. You control system dumps by creating an entry in the system dump table for each dump code that requires a change from the default action. A system d[...]

CEMT SET SYDUMPCODE NOD ae A system dump will not be suppressed by the DAE component. (However, be aware of the SUPPRESS and SUPPRESSALL options in the ADYSETxx parmlib member. These are controlled by the VRADAE and VRANODAE keys in the SDWA. They may lead to dump suppression even though NODAE is set here. For information about DAE, SUPPRESS, and S[...]

CEMT SET SYSTEM CEMT SET SYSTEM Function: Change the system attributes. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET . The SYSTEM keyword does not have to be typed. If you type just CEMT SET , SYSTEM is assumed as the default. You get a display that lists the current status, s[...]

CEMT SET SYSTEM DSA limit ( value ) specifies the maximum amount of storage, as a total number of bytes, within which CICS can dynamically allocate storage for the four individual DSAs that reside below the 16MB boundary. See the CICS System Definition Guide for a description of the DSALIM system initialization parameter.) If DSALIMIT specifies a v[...]

CEMT SET TASK T ime ( value ) specifies the interval, in milliseconds, for which CICS releases control to the operating system if no transactions are ready to resume processing. This interval is known as the ‘region exit interval’. It can have a value in the range 100–3600000, and must be greater than or equal to the SCANDELAY value. In the s[...]

CEMT SET TCLASS  CEMT SET TCPIP CEMT SET TCLASS Function: Reset the maximum number of tasks and the purge threshold for a transaction class. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET TCLASS (the minimum abbreviation is CEMT S TC ) with ( value ) or ALL. You get a display[...]

CEMT SET TCPIPSERVICE | CEMT SET TCPIPSERVICE | Function: Modify the status of a service using CICS | internal TCP/IP support | Description: SET TCPIPSERVICE allows you to update | the information relating to a service which uses CICS internal | TCP/IP support. | Note: This command has no effect on the sockets support | provided by the TCP/IP for O[...]

CEMT SET TDQUEUE CEMT SET TDQUEUE Function: Change the attributes of transient data queues. Description: The SET TDQUEUE command changes some of the attributes of a transient data queue. The queue must not be REMOTE or INDIRECT. You cannot alter the following attributes unless the queue is fully disabled:  ATIFACILITY  ATITERMID  ATITRANID[...]

CEMT SET TERMINAL CEMT SET TERMINAL Function: Change the attributes of named terminals. Description: The SET TERMINAL command changes some of the values of a named terminal defined in the terminal control table (TCT). It cannot be used for APPC sessions. In an SNA environment, a terminal is the CICS representation of an SNA logical unit with which [...]

CEMT SET TERMINAL CL ass ( value ) The 1-or 2-character suffix of a terminal list table (TLT). CO ldacq ( vtam only ) This is a special form of ACQUIRED, where no resynchronization is required. If the previous session abended, the use of COLDACQ overrides CICS integrity control. This could lead to integrity problems. Also, you should check the CSMT[...]

CEMT SET TRANSACTION CEMT SET TRANSACTION Function: Change some of the attributes of a selected transaction. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET TRANSACTION (the minimum abbreviation is CEMT S TRANS ) with ( value ), CLASS( value ), or ALL. You get a display that list[...]

CEMT SET TRDUMPCODE CEMT SET TRDUMPCODE Function: Change the status of a transaction dump. Description: Using the SET function, you can change entries in the transaction dump table to request a transaction dump. You can also set the maximum number of dumps that can be taken. See the CICS Problem Determination Guide for information on using dumps. S[...]

CEMT SET TSQUEUE | CEMT SET TSQUEUE | Function: Delete a temporary storage queue (TS queue). | This section applies also to the alternative command, CEMT | SET TSQNAME . Use either to delete temporary storage | queues (TS queues) with names up to 8 characters long. | Use SET TSQNAME to delete temporary storage queues (TS | queues) with names up to [...]

CEMT SET UOW  CEMT SET UOWLINK CEMT SET UOW Function: Commit or back out a shunted unit of work. Description: The SET UOW command enables you to commit, back out, or force a unit of work that has been shunted during the transaction’s in-doubt period. Syntax ─ ─ ─CEMT Set UOW( value )─ ─┬ ┬ ─ ─( value ) ─────?[...]

CEMT SET VTAM CEMT SET VTAM Function: Open or close the VTAM ACB, set the persistent session delay interval (PSDI), or deregister CICS from membership of a generic resource. Syntax: Press the Clear key to clear the screen. There are two ways of commencing this transaction:  Type CEMT SET VTAM (the minimum abbreviation is CEMT SV T ). You get a d[...]

CEMT SET WEB | CEMT SET WEB | Function: Open or close CICS internal sockets support, | change Web garbage collection settings, or change Web | 3270 terminal timeout settings. | Input: Press the Clear key to clear the screen. There are | two ways of commencing this transaction: |  Type CEMT SET WEB (the minimum abbreviation is CEMT S | W ). You g[...]

CEMT SET WEB 212 CICS Supplied Transactions[...]

CEOT—terminal status Chapter 12. CEOT—terminal status The CEOT command allows you to inquire about the status of your own terminal, and to change some of its values. You cannot use CEOT to inquire about or change the values of any other terminal. You can start CEOT from 3270 family display devices, or from equivalent terminals, or from the oper[...]

CEOT—terminal status NOT ti This terminal cannot be used by transactions that are initiated from this terminal. Setting NOTTI is valid only for sequential devices. PA geable Pages after the first in a series are written to the terminal on request from the operator. TT i This terminal can be used by transactions. Typing ? at the beginning of the f[...]

CESF—sign off Chapter 13. CESF—sign off Use the CESF transaction to sign off from the CICS system. This transaction:  Writes the signoff message to your terminal  Logs the message on the transient data destination CSCS  Logs any error message on the transient data destination CSMT. If you are using CESF to disconnect a terminal and sec[...]

CESF—sign off 216 CICS Supplied Transactions[...]

CESN—sign on Chapter 14. CESN—sign on By default, intending users of CICS see the CICS “good-morning” panel displayed when they logon to CICS as a VTAM application (see Figure 142). à ð         [...]

CESN—sign on Non-3270 family terminal A user can also sign on by providing all the user information along with the transaction id, as follows: | ─ ─ ─CESN USERID= uuuuuuuu ─ ─CESN ─────────────── | ─ ─ ─USERID= uuuuuuuu ─ ─┬ ┬ ──────────────────?[...]

CEST—supervisory terminal Chapter 15. CEST—supervisory terminal Use CEST to invoke a subset of the master terminal (CEMT) transaction. The CEST INQ|SET commands allows you to inquire about and alter some of the values of lines, netnames, tasks, and terminals. CEST can be invoked from 3270 family display devices, or from equivalent terminals, or[...]

CEST—supervisory terminal 220 CICS Supplied Transactions[...]

CETR—trace control Chapter 16. CETR—trace control Use CETR to control CICS tracing activity. Start the transaction by typing CETR on the command line of your display, as follows: CETR Press the ENTER key. You get the following display, with the values of your own system in each of the fields. à ð CETR CICS/ESA Trace Control Facility CI41 IYAH[...]

CETR—trace control The equal sign “=” can be used, when changing several fields, to indicate that a particular field should be changed to the same value as the one above. The complete list of components is: Components marked * are subcomponents of the AP domain, and the trace entries for these components are produced with a trace point ID of [...]

CETR—trace control STANDARD tracing OFF. (STANDARD tracing can also be turned off by coding SYSTR=OFF at system initialization.) You can then press PF4 for the “components trace options” screen, shown in Figure 146 on page 221, where you select the levels of tracing for the required components under the heading “Special”. Finally, on the [...]

CETR—trace control à ð CETR Help: CICS Component Trace (1) DATA ENTRY AND ALTERATION 1 From this panel detailed tracing levels can be set for each component. Each level is specified by a number between one and three, the presence of the number indicates that the level is set, the omission of a number indicates that the level is not set. Multipl[...]

CETR—trace control HELP panels for terminal and transaction trace If you press the help key (PF1) while viewing the terminal and transaction trace screen, the following panels are displayed: à ð CETR Help: CICS Terminal and Transaction Trace FUNCTION OF THE TERMINAL AND TRANSACTION PANEL. This panel has two main functions. (1) To allow STANDARD[...]

CETR—trace control 226 CICS Supplied Transactions[...]

CIND—in-doubt testing tool Chapter 17. CIND—in-doubt testing tool Use CIND to:  Test the effect of in-doubt failures on application programs  Produce shunted units of work (UOWs) to test programs that use SPI commands to inquire on, and change the characteristics of, shunted UOWs  Unshunt UOWs that have been shunted using CIND. Note: F[...]

CIND—in-doubt testing tool The CICS recovery manager domain unshunts all UOWs that were previously shunted because of the tool. The commit or backout specifies what happened in the dummy coordinator DFHINDSP, and hence what the CICS recovery manager domain instructs its subordinates to do when the unshunt takes place. For each UOW unshunted, mess[...]

CMAC—messages and codes display Chapter 18. CMAC—messages and codes display Use CMAC to give you individual message information as provided in the CICS Messages and Codes manual. To use the CMAC transaction:  Add the DFHCMAC group on the CICS system definition (CSD) file to your initialization list (DFHLIST)  Add the data set name of the [...]

CMAC—messages and codes display If you use methods 2 through 6 (listed above), the initial screen is bypassed and you move directly to the message information screen. 230 CICS Supplied Transactions[...]

CMSG—message switching Chapter 19. CMSG—message switching Use CMSG to send messages from your terminal to one or more destinations. The destination may be:  Another terminal  Another terminal, but only when a specified operator is signed on at that terminal  Another terminal, but only when the operator signed on at that terminal is in [...]

CMSG—message switching Canceling a message You can cancel your current message-switching transaction by entering:  CANCEL as the last 6 characters of your input. You get the response: TERMINATED BY OPERATOR.  CMSG as your first 4 characters, followed by end-of-data (EOD). You get the response: NO INPUT - REENTER.  CMSGx as your first 5 c[...]

CMSG—message switching When the processing status is TRANSACTION, you must request message delivery by entering a paging command, see Chapter 22, “CSPG—page retrieval” on page 253. A message is formed into one or more “pages”, the size of which is predefined for a destination by the system programmer. The terminal processing status dete[...]

CMSG—message switching Command syntax ┌┐ ── ────────────── ─ ─ ─CMSG ─ ─┬ ┬ ────── ─ ─'message' ─ ─┬ ┬ ───────────────────────────────────────────────── ─ ─[...]

CMSG—message switching Notes: 1. In all cases, the delivery time that you request must be less than 100 hours from the beginning of the current day. This means that the delivery time can never be later than 03.59 on the fourth day from the current day. | 2. When processing date options entered in the form | yy.ddd, mm/dd/yy and dd/mm/yy, CMSG ope[...]

CMSG—message switching | date. For example, if you specify | FULLDATE=07/29/1998 and TIME=1130, the | message is transmitted at 11.30 on 07/29/1998. | Note: In all cases, the delivery time that you request | must be less than 100 hours from the beginning | of the current day. This means that the delivery | time can never be later than 03.59 on th[...]

CMSG—message switching $ is provided as the second character. (For example, PROTECT=T causes a prefix of T$.) If this option is omitted, a default prefix of ** is used. ** is also the default for user application programs issuing BMS message requests where no protection is specified (REQID option omitted). A temporary-storage table (TST) entry is[...]

CMSG—message switching  If you specify ROUTE=(.L1,.L2), all entries from DFHTLTL1 are included as destinations. Duplicate entries within DFHTLTL1 are kept. All entries from DFHTLTL2 are checked for duplicates against the entries in the previously specified DFHTLTL1 and, if a duplicate is found, it is not repeated. The resulting destination lis[...]

CMSG—message switching If you specify a delivery time on the current day that falls within the past hour, it is interpreted as a request for immediate delivery. An earlier time than that is considered already passed and is treated as an error. The following message is issued: TIME ALREADY PASSED Note that, if the current time is 00.15, T=2345 is [...]

CMSG—message switching If a destination is specified by /opid without termid, it becomes termid/opid, in which termid is the identifier of the first terminal or LU to which an operator with that identifier is currently signed on. If no such terminal or LU is found, the destination is not valid and the operator is notified. Examples of 3600 and 37[...]

CMSG—message switching Message-switching responses Every input from the terminal receives a response. Most responses are preceded by indicators where the letters before OK represent the first character of each of the CMSG options (except CANCEL) as follows: D DATE E ERRTERM H HEADING I I D M MSG O OPCLASS P PROTECT R ROUTE S SEND T TIME These ind[...]

CMSG—message switching  N=4. An error (most likely caused by TS) occurred on a DFHBMS TYPE=PAGEOUT request. CLEAR/CANCL or cont input|route|msg An operator on a 3270 family display device pressed the CLEAR key and the message states continue (CONT): INPUT The last option in the previous input is complete. Enter an option to continue. ROUTE The[...]

CMSG—message switching specification to be eliminated. The message is routed following this input. 3. Any option that causes a return to normal option processing mode. If another ERRTERM option is not entered to correct this condition, the same error message is repeated after SEND has been reentered. HEADNG NOT YES/NO AT xxxx A HEADING option may[...]

CMSG—message switching OPCLASS NOT 1-24 AT xxxxx An OPCLASS parameter must be in the range 1–24. OPERATORS NOT SIGNDON nnn The ROUTE option specified operator identifications without terminal identifiers (that is, ROUTE=/opid). nnn operator identifications are not currently signed on. The valid reply to this is to enter one of the following: 1.[...]

CMSG—message switching UNSUP OPRT TRMNL xxxxxxxx An operator identifier without a terminal identifier was specified as a ROUTE destination; however that operator is signed on to a terminal that is a type not supported by BMS and is, therefore, an invalid destination. The valid reply to this is the same as for the message OPRTR ID NOT SIGNDON. UNS[...]

CMSG—message switching 246 CICS Supplied Transactions[...]

CRTE—remote transactions Chapter 20. CRTE—remote transactions Use CRTE to run transactions that reside on a remote system. Transaction routing in a multiregion operation (MRO) environment or for intersystem communication (ISC) is usually achieved by making entries in the PCT. The entries define the transaction as remote, and name the system on [...]

CRTE—remote transactions 248 CICS Supplied Transactions[...]

CSFE—terminal and system test Chapter 21. CSFE—terminal and system test Use CSFE to diagnose terminal problems and software problems. This transaction is mainly intended to be used by system programmers and IBM field engineers. Use this transaction to:  Test your terminal  Activate the system spooling interface trace  Activate the term[...]

CSFE—terminal and system test Debug functions Storage freeze, the storage violation trap and the global trap/trace exit are all debugging functions that are controlled by the CSFE transaction. These functions are described in the following sections. Storage freeze You can use CSFE DEBUG to freeze storage that is normally freed during the processi[...]

CSFE—terminal and system test Global trap/trace program exit and global kernel exit You can use CSFE DEBUG with the TRAP or GTRAP operand to activate and deactivate the global trap/trace program exit routine or the global kernel exit routine respectively. These exits are intended to be used only under the guidance of IBM support personnel. [...]

CSFE—terminal and system test 252 CICS Supplied Transactions[...]

CSPG—page retrieval Chapter 22. CSPG—page retrieval Some transactions, especially those performed on screens, produce a response that is too large to be displayed or printed at one time. The whole response is held on direct access storage, and only the first portion (called a page) is displayed. You can manipulate these pages, through basic map[...]

CSPG—page retrieval * ldc Is the LDC for the device to which you want to send the message. (See Page retrieval for logical devices.) *ALL A special case of *ldc. H hhhhh Is the 6-digit hexadecimal identifier of an undelivered logical message to be retrieved. You would normally determine this identifier by entering a page query command (see “Dis[...]

CSPG—page retrieval Display information about logical messages This command displays the message identifiers and titles of logical messages queued for this terminal. getpageQ G etpage The user-defined identification code for the retrieval transaction, and is 1–7 characters long. The PGRET system initialization parameter defines this code. Q (Qu[...]

CSPG—page retrieval C/PREC 143 This finds the personnel record for employee number 1043. PREC is the identifier of a user-written transaction for examining personnel records. Receive: NAME - BERESFORD, JERRY A. EMPLOYEE NO - 143 (and so on) To go back to the list of names, enter: T/C T/ is the user-defined transaction identifier that termin[...]

CSPG—page retrieval H hhhhh The 6-digit hexadecimal identifier of a specific, undelivered logical message to be erased. (This identifier would have been determined using a page query command.) If the message specified is security-protected, the operator should have a security code that matches the one in the message. If a message identifier (hhhh[...]

CSPG—page retrieval 258 CICS Supplied Transactions[...]

CWTO—write to console operator Chapter 23. CWTO—write to console operator Use CWTO to send messages to the console operator. Start the transaction by entering CWTO, optionally followed by the text of your message, on the command line of the screen, as follows: ─ ─ ─CWTO ─ ─Message ─ Press the ENTER key. If the transactio[...]

CWTO—write to console operator 260 CICS Supplied Transactions[...]

DSNC—write to console operator Chapter 24. DSNC—CICS DB2 transaction DSNC The DSNC transaction can be used to perform the following:  Enter DB2 commands from a CICS terminal.  Cause threads to be terminated when they are released (DSNC DISCONNECT).  Display information about transactions using the CICS DB2 interface, and display statis[...]

DSNC—write to console operator 262 CICS Supplied Transactions[...]

Appendix Appendix. List of CICS transactions The following table lists all the transactions that are supplied with CICS, except for those that are part of CICS sample programs. The transactions that have operator interfaces, and which are therefore described in this manual, are marked by an asterisk (*). The remainder therefore have no operator int[...]

Appendix Tranid Program Group Description Note: Transactions CGRP, CSSY, CSTP, and CSXM are transaction names that are used by some CICS tasks. Tranid Program Group Description CRSQ DFHCRQ DFHISC ATI purge | CWXN | DFHWBXN | DFHWEB | CICS Web Attach | Transaction CRSR DFHCRS DFHISC Remote scheduler CRSY DFHRMSY DFHRMI Resource manager resynchroniza[...]

Index Special Characters ? and CEMT 45 (VALUE) CEMT INQUIRE JMODEL 92 CEMT INQUIRE JOURNALNAME 93 CEMT SET PROCESSTYPE 192 * and CEMT 47 *ALL CSPG 254 *LDC CMSG 239 − TERMID*LDC/OPID CMSG 239 + in CEMT syntax 47 + in scrolling under CEMT 48 + HHMM CMSG 244 + M CMSG 244 + MM CMSG 244 + TERMID*LDC/OPID CMSG 239 A abbreviation of keywords CEMT trans[...]

ALL CEBT INQUIRE AUXTRACE 21 CEBT SET AUXTRACE 27 CEDA 36 CEMT INQUIRE AUTINSTMODEL 53 CEMT INQUIRE AUXTRACE 56 CEMT INQUIRE CONNECTION 58 CEMT INQUIRE DB2CONN 63 CEMT INQUIRE DB2ENTRY 67 CEMT INQUIRE DB2TRAN 70 CEMT INQUIRE DSNAME 74 CEMT INQUIRE FILE 85 CEMT INQUIRE JMODEL 92 CEMT INQUIRE JOURNALNAME 93 CEMT INQUIRE MODENAME 95 CEMT INQUIRE NETNA[...]

AUTOINSTALL (continued) CSFE ZCQTRACE 249 AUTOMATIC CEBT SET TAKEOVER 30 automatic transaction initiation (ATI) 128, 203 AUTOPAGEABLE CEMT INQUIRE NETNAME 100 CEMT INQUIRE TERMINAL 131 CEMT SET NETNAME 190 CEMT SET TERMINAL 204 CEOT 213 autopaging terminal 257 AUTOSWITCH CEBT INQUIRE DUMP 22 CEBT SET DUMP 28 CEMT INQUIRE DUMPDS 79 CEMT SET DUMPDS 1[...]

CATD transaction 263 CATR transaction 263 CAUSE CEMT INQUIRE UOWDSNFAIL 146 CAVM (CICS availability manager) 25 CBAM transaction 9, 263 CBRC transaction 263 CCIN transaction 263 CDATAKEY CEMT INQUIRE TRANSACTION 135 CDBC transaction 11, 263 CDBD transaction 263 CDBF transaction 263 CDBI transaction 13, 263 CDBM transaction 15, 263 CDBN transaction [...]

CEMT transaction (continued) PERFORM 155 PROCESSTYPE 103, 191 PROFILE 105 PROGRAM 105, 192 program function (PF) keys 46 question mark preceding CEMT 45 QUEUE 194 request formats 45 REQUESTMODEL 110 RESET 157 RRMS 110 scrolling a display 48 SECURITY 157 security checking 49 SET 45 SHUTDOWN 158 SNAP 156 STATISTICS 111, 159, 194 STREAMNAME 113 SYDUMP[...]

CLOSED (continued) CEBT SET DUMP 28 CEMT INQUIRE DUMPDS 79 CEMT INQUIRE FILE 88 CEMT INQUIRE IRC 91 CEMT INQUIRE MODENAME 96 CEMT INQUIRE RRMS 110 CEMT INQUIRE TDQUEUE 127 CEMT INQUIRE VTAM 153 CEMT SET DUMPDS 179 CEMT SET FILE 181 CEMT SET IRC 185 CEMT SET MODENAME 188 CEMT SET TDQUEUE 203 CEMT SET VTAM 210 CLQ2 transaction 263 CLR1 transaction 26[...]

CONNECTION (continued) CEMT INQUIRE MODENAME 96 CEMT INQUIRE UOW 144 CEMT INQUIRE UOWDSNFAIL 146 CEMT INQUIRE UOWLINK 152 CEMT PERFORM STATISTICS 159 CEMT SET CONNECTION 163 CEMT SET MODENAME 188 CONNECTST CEMT INQUIRE DB2CONN 65 CEMT SET DB2CONN 169 CONNSTATUS CEMT INQUIRE CONNECTION 59 CEMT INQUIRE TSPOOL 140 CONSOLE CEMT INQUIRE TERMINAL 130 con[...]

CSSC transaction 264 CSSF transaction 264 CSSX transaction 264 CSSY transaction 264 CSTE transaction 264 CSTP transaction 264 CSXM transaction 264 CSZI transaction 264 CTERM CEMT INQUIRE DB2CONN 64 CEMT SET DB2CONN 169 CTERM option DSNCRCT macro 169 CTIN transaction 264 CTLGALL CEMT INQUIRE SYSTEM 117 CEMT SET SYSTEM 198 CTLGMODIFY CEMT INQUIRE SYS[...]

DB2CONN (continued) CEMT INQUIRE DB2CONN 63 CEMT INQUIRE SYSTEM 116 CEMT SET transaction 167 CEMT transaction 63 DB2ENTRY CEDA 36 CEMT DISCARD 51 CEMT INQUIRE DB2ENTRY 67 CEMT INQUIRE DB2TRAN 70 CEMT SET DB2TRAN 174 CEMT SET transaction 171 CEMT transaction 67 DB2ID CEMT INQUIRE DB2CONN 65 CEMT SET DB2CONN 169 DB2PLAN CEMT INQUIRE TASK 121 DB2RELEA[...]

DSALIMIT (continued) CEMT SET SYSTEM 199 DSAS CEMT INQUIRE transaction 72 CEMT SET transaction 176 DSNAME CEMT INQUIRE DSNAME 75 CEMT INQUIRE FILE 86 CEMT INQUIRE TDQUEUE 128 CEMT INQUIRE UOWDSNFAIL 146 CEMT SET FILE 181 CEMT SET transaction 176 CEMT transaction 74 DSNC transaction 261, 264 DSNC transactions DISCONNECT 261 DISPLAY 261 MODIFY 261 ST[...]

ENQNAME CEMT INQUIRE ENQMODEL 82 ENQQUEUE CEMT SET transaction 179 ENQSCOPE CEMT INQUIRE ENQ 81 CEMT INQUIRE ENQMODEL 82 CEMT INQUIRE UOWENQ 149 ENQUEUE CEMT PERFORM STATISTICS 159 EQUAL CEMT INQUIRE DB2CONN 65 CEMT INQUIRE DB2ENTRY 69 CEMT SET DB2CONN 170 CEMT SET DB2ENTRY 173 ERDSASIZE CEMT INQUIRE DSAS 73 error message in partition 5 errors in m[...]

FORCECLOSE (continued) CEMT SET VTAM 210 FORCEDISABLED CEMT SET DB2ENTRY 173 FORCENOTCONNECTED CEMT SET DB2CONN 169 FORCEPURGE CEMT INQUIRE CONNECTION 61 CEMT INQUIRE NETNAME 101 CEMT INQUIRE TASK 121 CEMT INQUIRE TERMINAL 131 CEMT SET CONNECTION 164 CEMT SET LINE 186 CEMT SET NETNAME 190 CEMT SET TASK 200 CEMT SET TERMINAL 205 FORCEQR CEMT INQUIRE[...]

I ID CMSG 236 ID OPERAND GT 62 CHARS CMSG 243 ID OPERAND MISSING CMSG 243 ID PARAM MISSING OR NO ) CMSG 243 IDENTIFIER CEMT INQUIRE TASK 121 identifiers resource, lists of 47 identifying terminals 3 IDLE CEMT INQUIRE DELETSHIPPED 70 CEMT SET DELETSHIPPED 175 IMMCLOSE CEMT INQUIRE IRC 91 CEMT INQUIRE VTAM 153 CEMT SET IRC 185 CEMT SET VTAM 210 IMMED[...]

IRC (continued) CEMT INQUIRE transaction 91 CEMT INQUIRE UOWLINK 151 CEMT SET transaction 185 IRC (interregion communication) CEMT INQUIRE transaction 91 CEMT SET transaction 185 ISOLATE CEMT INQUIRE TRANSACTION 134 ISOLATEST CEMT INQUIRE TRANSACTION 134 J JAVA CEMT INQUIRE PROGRAM 108 JMODEL CEMT DISCARD 51 CEMT transaction 92 JMODEL(VALUE) CEMT I[...]

LTPNAME CEMT INQUIRE PARTNER 103 LU61 CEMT INQUIRE CONNECTION 61 CEMT INQUIRE UOWLINK 152 M MAIN CEMT INQUIRE TSMODEL 138 CEMT INQUIRE TSQUEUE 142 MANUAL CEBT SET TAKEOVER 30 MAPSET CEDA 37 CEMT INQUIRE PROGRAM 108 master terminal operator duties 4 restriction 4 transaction, CEBT 21 transaction, CEMT 45 types of terminal 4 master terminal, programm[...]

messages (continued) ROUTE INVALID AT xxxxx 244 sending 231 SPACE MUST FOLLOW TRANSID 244 TERMID GT 4 CHAR AT xxxxx 244 TERMID NOT + / − AT xxxxx 244 TERMINATED BY OPERATOR 244, 259 terminating in partition 5 termination 256 TIME ALREADY PASSED 244 TIME INVALID AT xxxxx 244 TIME NOT 4 CHARS AT xxxxx 244 TOO MANY TBL SFX AT xxxxx 244 UNBALANCD PAR[...]

NEWCOPY CEMT INQUIRE PROGRAM 107 CEMT SET PROGRAM 193 NEWPS CESN 218 NEXT CEBT INQUIRE AUXTRACE 21 CEBT SET AUXTRACE 27 CEMT INQUIRE AUXTRACE 56 CEMT SET AUXTRACE 162 NEXTTIME CEMT INQUIRE STATISTICS 111, 112 CEMT SET STATISTICS 194 NO CMSG 236 NO INPUT - REENTER CMSG 243 NO MESSAGE PROVIDED CMSG 243 NO MSG STRT QUOT AT XXXXX CMSG 243 NO TERM LIST [...]

NORESTART CEMT PERFORM SHUTDOWN 158 NORETAINED CEMT INQUIRE DSNAME 77 NOROLLBACK CEMT INQUIRE DB2CONN 65 CEMT INQUIRE DB2ENTRY 68 NOSDTRAN CEMT PERFORM SHUTDOWN 158 NOSECURITY CEMT INQUIRE TSMODEL 138 NOSHUTDOWN CEMT INQUIRE SYDUMPCODE 115 CEMT INQUIRE TRDUMPCODE 137 CEMT SET SYDUMPCODE 197 CEMT SET TRDUMPCODE 207 NOSWITCH CEBT INQUIRE AUXTRACE 21 [...]

OFF (continued) CEMT SET STATISTICS 195 CSFE SPOOLFE 249 CSFE ZCQTRACE 249 OK CEMT INQUIRE STREAMNAME 113 CEMT INQUIRE UOWLINK 152 OLD CEMT INQUIRE FILE 86 CEMT INQUIRE TDQUEUE 126 CEMT SET FILE 183 OMGINTERFACE option CEMT INQUIRE REQUESTMODEL command 110 OMGMODULE option CEMT INQUIRE REQUESTMODEL command 110 OMGOPERATION option CEMT INQUIRE REQUE[...]

partitions, BMS 4 PARTITIONSET CEDA 37 CEMT INQUIRE PROGRAM 109 PARTNER CEDA 37 CEMT DISCARD 51 CEMT INQUIRE PARTNER 103 CEMT INQUIRE transaction 102 PATH CEMT INQUIRE DSNAME 76 PAUSE CEBT INQUIRE AUXTRACE 21 CEBT SET AUXTRACE 27 CEMT INQUIRE AUXTRACE 56 CEMT SET AUXTRACE 162 PENDING CEMT INQUIRE CONNECTION 60 PENDSTATUS CEMT INQUIRE CONNECTION 60 [...]

PROGAUTOEXIT CEMT INQUIRE SYSTEM 117 CEMT SET SYSTEM 199 PROGAUTOINST CEMT INQUIRE SYSTEM 117 CEMT SET SYSTEM 198 PROGRAM CEDA 37 CEMT DISCARD 52 CEMT INQUIRE AUTOINSTALL 55 CEMT INQUIRE PROGRAM 108 CEMT INQUIRE transaction 105, 134 CEMT PERFORM STATISTICS 159 CEMT SET AUTOINSTALL 161 CEMT SET PROGRAM 192 CEMT SET transaction 192 program function ([...]

READSTATUS CEMT INQUIRE FILE 88 REASON CEMT INQUIRE UOWDSNFAIL 146 REBUILD CEMT PERFORM SECURITY 157 rebuild resource profiles 157 RECONNECT CEMT INQUIRE DB2CONN 66 CEMT SET DB2CONN 170 RECORD CEMT INQUIRE STATISTICS 112 CEMT PERFORM STATISTICS 159 RECORDING CEMT INQUIRE STATISTICS 112 RECORDNOW CEMT SET STATISTICS 195 RECORDSIZE CEMT INQUIRE FILE [...]

resource definitions profile, DFHCICSP 2 resource groups Subdefining 47 resource identifiers lists of 47 RESYNC CEMT INQUIRE CONNECTION 62 CEMT SET CONNECTION 166 RESYNCSTATUS CEMT INQUIRE UOWLINK 152 RETAINED CEMT INQUIRE DSNAME 77 CEMT INQUIRE ENQ 81 CEMT INQUIRE UOWENQ 150 RETLOCKS CEMT INQUIRE DSNAME 77 retrieve a page 5, 253 RETRY CEMT INQUIRE[...]

SECURITYST CEMT INQUIRE TSMODEL 138 SEND CMSG 238 sequential terminal 233 SERVSTATUS CEMT INQUIRE CONNECTION 62 CEMT INQUIRE NETNAME 101 CEMT INQUIRE TERMINAL 131 SESSION CEMT INQUIRE NETNAME 100 CEMT INQUIRE TERMINAL 131 SESSIONID CEDF 41 SESSIONS CEDA 37 SHARE CEMT INQUIRE FILE 86 CEMT SET FILE 183 SHARED CEMT INQUIRE PROGRAM 109 CEMT SET PROGRAM[...]

STATE CEMT INQUIRE ENQ 81 CEMT INQUIRE UOWENQ 150 STATIC CEMT INQUIRE DSNAME 76 STATISTICS CEMT INQUIRE STATISTICS 112 CEMT INQUIRE transaction 111 CEMT PERFORM 159 CEMT SET transaction 194 STATS CEMT PERFORM STATISTICS 160 STATSQUEUE CEMT INQUIRE DB2CONN 66 CEMT SET DB2CONN 170 STATUS CEMT INQUIRE AUXTRACE 56 CEMT INQUIRE JOURNALNAME 93 CEMT INQUI[...]

SYSID (continued) CEMT SET TSQUEUE 208 CRTE transaction 247 SYSLOG CEMT INQUIRE STREAMNAME 113 SYSTEM CEMT INQUIRE transaction 116 CEMT SET transaction 198 system spooling interface trace 249 SYSTEMLOG CEMT INQUIRE STREAMNAME 113 T tab key 48 TABLE CEMT INQUIRE FILE 88 TABLEMGR CEMT PERFORM STATISTICS 160 TABLENAME CEMT INQUIRE FILE 88 CEMT SET FIL[...]

TERMID/OPID CMSG 237 TERMID*LDC CMSG 239 TERMINAL CEDA 37 CEMT DISCARD 52 CEMT INQUIRE NETNAME 101 CEMT INQUIRE TERMINAL 132 CEMT INQUIRE transaction 129 CEMT PERFORM STATISTICS 160 CEMT SET transaction 204 terminal and system test transaction, CSFE 249 terminal builder trace 249 terminal list table (TLT) 3 terminal operator duties 3 master 4 pagin[...]

TRANISOLATE CEMT INQUIRE SYSTEM 119 TRANSACTION CEDA 37 CEMT DISCARD 52 CEMT INQUIRE NETNAME 101 CEMT INQUIRE TERMINAL 132 CEMT INQUIRE transaction 133, 135 CEMT PERFORM STATISTICS 160 CEMT SET transaction 206 transaction routing, CRTE 247 transaction, BTS browser 9 transaction, in-doubt test tool 227 transaction, trace control 221 transactions all[...]

TX CEMT INQUIRE DB2CONN 64 CEMT INQUIRE DB2ENTRY 68 CEMT SET DB2CONN 168 CEMT SET DB2ENTRY 173 TXID CEMT INQUIRE DB2CONN 63 CEMT INQUIRE DB2ENTRY 67 CEMT SET DB2CONN 167 CEMT SET DB2ENTRY 172 TYPE CEMT INQUIRE ENQ 81 CEMT INQUIRE JMODEL 92 CEMT INQUIRE JOURNALNAME 94 CEMT INQUIRE TDQUEUE 128 CEMT INQUIRE UOWENQ 150 CEMT INQUIRE UOWLINK 152 TYPE att[...]

USERID (continued) CEMT INQUIRE TDQUEUE 128 CEMT INQUIRE TERMINAL 132 CEMT INQUIRE UOW 144 CEMT SET DB2CONN 168 CEMT SET DB2ENTRY 173 CESN 218 USERTABLE CEMT INQUIRE FILE 88 CEMT SET FILE 183 V VALID CEMT INQUIRE DSNAME 76 VALIDITY CEMT INQUIRE DSNAME 76 value CEMT INQUIRE CONNECTION 58 CEMT INQUIRE DSNAME 74 CEMT INQUIRE FILE 85 CEMT INQUIRE MODEN[...]

XNOTDONE CEMT INQUIRE CONNECTION 62 XOK CEMT INQUIRE CONNECTION 62 XRF and the CEBT transaction 21 Y YES CMSG 236 YY.DDD CMSG 234 YYYY CSPG 255 YYYY.DDD CMSG 235 Z ZERO LENGTH MSG AT '' CMSG 245 Index 295[...]

296 CICS Supplied Transactions[...]

Sending your comments to IBM If you especially like or dislike anything about this book, please use one of the methods listed below to send your comments to IBM. Feel free to comment on what you regard as specific errors or omissions, and on the accuracy, organization, subject matter, or completeness of this book. Please limit your comments to the [...]

IBM  Program Number: 5655-147 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. SC33-1686-2[...]

Spine information: IBM CICS TS for OS/390 CICS Supplied Transactions Release 3[...]