IBM ThinkPad i 140A manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 91 pages
- 2.23 mb
Aller à la page of
Les manuels d’utilisation similaires
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation IBM ThinkPad i 140A. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel IBM ThinkPad i 140A ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation IBM ThinkPad i 140A décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation IBM ThinkPad i 140A devrait contenir:
- informations sur les caractéristiques techniques du dispositif IBM ThinkPad i 140A
- nom du fabricant et année de fabrication IBM ThinkPad i 140A
- instructions d'utilisation, de réglage et d’entretien de l'équipement IBM ThinkPad i 140A
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage IBM ThinkPad i 140A ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles IBM ThinkPad i 140A et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service IBM en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées IBM ThinkPad i 140A, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif IBM ThinkPad i 140A, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation IBM ThinkPad i 140A. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
S37L-5192-00 IBM Mobile Systems ThinkPad i Series 1400 (2611) This Manual Supports The Following Models: 1412, 1419, 1452, 1456, 1459, 1472, 1476, 1479, 140A, 140C, 140F, 140H, 140K, 140L, 140M, 140T, 143C, 143H, 143K, 143L, 143M, 143T, 147A, 147F, 147A, 149C, 149F, 149H, 149K, 149M, 149T, Hardware Maintenance Manual May 1998[...]
-
Page 2
Before using this information and the product it supports, be sure to read the general information under “Read This First” on page 1. First Edition (May 1999) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPO- RATION PROVIDES T[...]
-
Page 3
Contents ThinkPad i Series 1400 Hardware Maintenance Manual . . . . . . . . . . . . . . . . . . . . . 1 Read This First .................. 1 How to Use Error Messages .......... 1 How to Diagnose Multiple FRUs ........ 1 What to Do First ................ 2 Screw Notices . . . . . . . . . . . . . . . . . 3 Power-On and Setup Password .......... 4 Ch[...]
-
Page 4
Battery Assembly . . . . . . . . . . . . . . . 36 DIMM and DIMM Cover ............ 3 7 Modem Board Cover and Modem Board .... 3 8 Keyboard . . . . . . . . . . . . . . . . . . . 39 CPU Thermal Plate .............. 4 1 RTC Battery, CPU EMI Shield and Hard Disk Drive 42 PCMCIA Holder . . . . . . . . . . . . . . . . 44 LCD Assembly ................. 4 [...]
-
Page 5
ThinkPad i Series 1400 Hardware Maintenance Manual Read This First Before you go to the check procedures, be sure to read this section. Important Notes Only certified trained personnel should service the computer. Read the FRU service procedures before replacing any FRUs. Be extremely careful during write operations such as copying, sav[...]
-
Page 6
What to Do First The servicer must include the following in the parts exchange form or parts return form that is attached to the returned FRU: 1. Name and phone number of servicer. 2. Date of service. 3. Date when part failed. 4. Date of purchase. 5. Failure symptoms, error codes appearing on display, and beep symptoms. 6. Procedure index and page [...]
-
Page 7
If the following symptoms are present, they may indicate damage caused by non-warranted activity: Missing parts may be a symptom of unauthorized service or modification. HDD spindles can become noisy if subjected to excessive force or by being dropped. Screw Notices The computer uses special nylon-coated screws with the following characteri[...]
-
Page 8
Power-On and Setup Password To clear a password from the system, first identify the system password switch by referring to “Switch Locations” on page 74, then follow these steps: 1. Turn off the computer. 2. Unplug the AC Adapter and remove the battery. 3. Remove the keyboard by referring to “Keyboard” on page 39, and the thermal plate by r[...]
-
Page 9
Check Procedures Use the following procedure as a guide for computer prob- lems. Notes: 1. The diagnostic tests are intended to test only IBM products. Non-IBM products, prototype cards, or mod- ified options can give false errors and invalid system responses. 2. Some test items require tools as shown below: Audio wrap cable (P/N: 65G5180) [...]
-
Page 10
Symptoms (Verified) Go to Other symptoms Appropriate check instructions in this section, then use appropriate tables in “Symptom-to-FRU Index” on page 17. Power Systems Check To verify the symptom of the problem, power on the com- puter using each of the power sources as follows: 1. Remove the battery pack, diskette drive, and hard disk drive. [...]
-
Page 11
If the measured voltage is correct, replace the planar board. If the problems still persist, go to “Undetermined Problems” on page 25. If the voltage is not correct, go to the next step. 2. Unplug the AC Adapter cable from the AC power outlet and wait for five minutes or longer to allow the over-voltage protection circuit of the AC [...]
-
Page 12
Note: Signal lines, not used in these steps, are used for communication between the system and the battery. 3. If the voltage is less than +8 V dc, recharge the battery pack. If the voltage is still less than +8 V dc after recharging, replace the battery. Terminal Signal / Voltage (V dc) 4 Reserved 5 Thermal 6 Sense 7 Ground Planar Board Check The [...]
-
Page 13
CAUTION: This system cannot work without DIMM memory. Memory errors might stop system operation, show error messages on the screen, or hang the system. Use the following procedure to isolate memory problems: Note: Make sure that the DIMM is properly installed into the connector. A loose connection can cause an error. 1. Power off the computer and r[...]
-
Page 14
Replace the planar board. The following external input devices are supported for this computer: Numeric keypad Mouse (PS/2 compatible) Keyboard If any of these devices do not work, reconnect the cable connector and repeat the failing operation. If the problem still exists, replace the device, and then the planar board. Audio Functio[...]
-
Page 15
If either the pointing stick or the click button does not work, do the following actions one a time to correct the problem. Do not replace a non-defective FRU. 1. Reconnect the keyboard flexible cables and the TrackPoint flexible cable. 2. Replace the TrackPoint board. 3. Replace the keyboard. 4. Replace the planar board. Diskette Drive Check Do th[...]
-
Page 16
If an error occurs, reconnect the connector on the planar board. If the error still remains: 1. Reconnect the CD-ROM/DVD-ROM drive cable. 2. Replace the CD-ROM/DVD-ROM drive cable. 3. Replace the CD-ROM/DVD-ROM drive. 4. Replace the planar board. Modem Board Check Do the following to isolate the problem to the system internal modem: 1. Boot from th[...]
-
Page 17
BIOS Utility Your computer has a BIOS Utility that allows you to con- figure the computer an its hardware settings. Note: The computer is also bundled with a Windows- based computer management utility similar in func- tion with the BIOS Utility called the Notebook manager. The computer is already correctly configured for you. If you make any change[...]
-
Page 18
Navigating the BIOS Utility Keep in mind the following when using the BIOS Utility: From the main menu screen, press the up or down arrow keys to move from one menu item to another; then press Enter to enter the selected menu. Parameters displayed in low brightness (grayed out) are not user-configurable. The computer detects and sets the va[...]
-
Page 19
Power Management Features Two power management modes are available in the com- puter system to reduce power consumption and to prolong battery life. Screen Blanking Mode When in screen blanking mode, the following occurs: The LCD backlight turns off. Events that cause the computer to enter screen blanking mode: Screen blanking requested by [...]
-
Page 20
Note: If the computer enters standby mode and the com- puter is using a communication or I/O PC Card, the PC Card and application program remain active. Hibernation Mode When in hibernation mode, the following occurs: The system status, RAM, VRAM, and setup data are stored on the hard disk. The system is powered off. Events that cause the c[...]
-
Page 21
Symptom-to-FRU Index The Symptom-to-FRU Index lists the symptoms and errors and the possible causes. The most likely cause is listed first. Note: Perform the FRU replacement or actions in the sequence shown in the FRU/Action columns. If a FRU does not solve the problem, put the original part back in the computer. Do not replace a non- defective FRU[...]
-
Page 22
Error Code Message FRU/Action in Sequence 050 IDE Drive 0 Error Hard disk connection board Hard disk drive Planar board 054 IDE Drive(s) Disabled Hard disk drive cable Hard disk drive 056 IDE Drive 0 Auto Detection Failed Hard disk connection board Hard disk drive Planar board 070 Real Time Clock Error Reset time[...]
-
Page 23
Beep Symptoms Symptom/Error FRU/Action in Sequence Five short beeps, power-on indicator turns on then off and LCD is blank. Ensure that "System Boot Drive" in the "System Secu- rity" menu of the BIOS Utility is not set to Drive A“. Battery Four short beeps every minute and system doesn't enter hibernation mode. ?[...]
-
Page 24
Symptom/Error FRU/Action in Sequence No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connec- tors. LCD inverter ID LCD LVDS board (for 14.1–inch LCD) LCD FPC cable LCD inverter LCD Planar board No beep, power-on indicator turns on and a blinking cursor s[...]
-
Page 25
Symptom/Error FRU/Action in Sequence No beep, power-on indicator turns on and LCD is blank. Power source (battery and adapter). See “Power Systems Check” on page 6. Reconnect the LCD connector Charger board CPU board Hard disk drive LCD inverter ID LCD LVDS board (for 14.1–inch LCD) LCD FPC cable Inverter ?[...]
-
Page 26
Indicator-Related Symptoms Symptom/Error FRU/Action in Sequence Indicator incorrectly remains off or on, but system runs cor- rectly. Reconnect the indicator board connector. Indicator board Power-Related Symptoms Symptom/Error FRU/Action in Sequence Power shuts down during operation. Go to “Power Systems Check” on page 6. AC Ad[...]
-
Page 27
Audio-Related Symptoms Symptom/Error FRU/Action in Sequence Internal speakers make noise or emit no sound. Speaker volume control Go to “Audio Function Check” on page 10. External speakers make noise or emit no sound. Speaker volume control Go to “Audio Function Check” on page 10. In DOS or Windows, multimedia programs, no s[...]
-
Page 28
Symptom/Error FRU/Action in Sequence Battery fuel-gauge doesn't go higher than 90%. Remove battery pack and let it cool for 2 hours. Refresh battery (continue using battery until power off, then charge the battery). Battery pack Charger board Planar board System configuration does not match the installed devices. Enter [...]
-
Page 29
Modem-Related Symptoms Symptom/Error FRU/Action in Sequence Internal modem does not work correctly Go to “Modem Board Check” on page 12. Modem connector Modem board Planar board Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as co[...]
-
Page 30
7. If the problem remains, replace the following FRUs one at a time. Do not replace a non-defective FRU. TrackPoint board Charger board Audio & battery function connection board LCD assembly Planar board 26 ThinkPad i Series 1400[...]
-
Page 31
Related Service Procedures This section provides information about the following: “Flash Memory Update” “Status Indicators” “Power Switch” on page 29 “Diagnostic Program Diskette” on page 29 “Maintenance Program Diskette” on page 30 “Fn Key Combinations” on page 32 Flash Memory Update The BIOS Utility[...]
-
Page 32
Symbol Color Meaning (1) Battery status Green Enough battery power remains for operation. Blinking orange The battery pack needs to be charged Orange The battery pack is being charged. (2) Standby mode Green The computer is in standby mode. Blinking green The computer is entering or resuming from hibernation mode. (3) Drive in use Orange Data is be[...]
-
Page 33
Power Switch If the computer cannot be turned off by pressing the power switch, try pressing it for more than 4 seconds to force the system to shutdown. Diagnostic Program Diskette The Diagnostic Program Diskette (P/N: 09N1020) contains the PC Doctor diagnostics program. To use PC Doctor, some test items require some test tools as listed below: [...]
-
Page 34
2. Press the up and down arrow keys to move in a selected menu; then press Enter to enable the high- lighted option. Note: You can press F1 for help. Maintenance Program Diskette The Maintenance Program Diskette (P/N: 09N1025) pro- vides the three following functions: “Setting the LCD Panel ID” “Setting the Thermal Sensor” on page 3[...]
-
Page 35
Note: If the LCD has no display after changing the ID code, make sure you write the correct ID code or try reconnecting the LCD FPC cable connectors. Setting the Thermal Sensor: The system is equipped with sensors to protect against system over- heating. By setting the system and processor thermal thresholds, the system can turn on the cooling Fan [...]
-
Page 36
Fn Key Combinations The following table shows the Fn key and function key combinations and their corresponding functions. The Fn key works independently of the operating system. The operating system obtains the status through the system management interface to control the system. Fn + Result F1 The ShortCut Keys Utility program appears. The ShortCu[...]
-
Page 37
Product Overview The following shows an overview of the system features. Feature Description Processor Intel** Mobile Pentium** processor 366 MHz –or– Intel** Mobile Celeron** processor 366 MHz Bus architecture PCI System memory 32MB or 64MB DIMM card, maximum 128MB (144–pin SDRAM) CMOS RAM 256KB Video 12.1–inch, 65,536 colors, 800x600 pixe[...]
-
Page 38
FRU Removals and Replacements This section contains information about removals and replacements. Do not damage any parts. Only certified and trained personnel should service the computer. The arrows in this section show the direction of move- ment to remove a FRU, or to turn a screw to release the FRU. The arrows are marked in numeric order[...]
-
Page 39
Before FRU Removals and Replacements Screw Type Example Explanation Note: Some screws have nylock paste (on the grooves) for better friction and increased stability. Some screws have bracket supports. FPC Cable Connector Type Unplugging the Cable: To unplug the cable, first unlock the connector by pulling up the two clasps on both sides of the conn[...]
-
Page 40
Battery Assembly 1 2 3 Reverse the steps described above when installing a new battery pack. 36 ThinkPad i Series 1400[...]
-
Page 41
DIMM and DIMM Cover 1 2 3 4 To install the DIMM: With the notched end of the DIMM toward the right side of the socket, insert the DIMM, at an angle of approximately 20°, into the socket; then press it firmly. Pivot the DIMM until it snaps into place. 1 2 Side View 1 2 Step Size (Quan- tity) Head & Color Torque Memo 1 M2 x 5L (2) Bind head, bla[...]
-
Page 42
Modem Board Cover and Modem Board 1 3 2 To remove the modem board: Disconnect the modem cable (4); then press the release latches on both sides of the modem board (5), and pull out the modem board (6). 5 6 4 Step Size (Quan- tity) Head & Color Torque Memo 2 M2 x 5L (2) Bind head, black 1.6kgf-cm Note: The screws do not separate from the modem b[...]
-
Page 43
Keyboard “Battery Assembly” on page 36 1 2 Note: Be careful not to scratch the surface of the name plate cover. 3 Step Size (Quan- tity) Head & Color Torque Memo 3 M2 x 4L (2) Pan head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. ThinkPad i Series 1400 39[...]
-
Page 44
4 5 6 8 7 When replacing the keyboard, make sure that the 3 cables are clean and insert them directly into the connectors, making sure they contact with the bottom of the connector. Now press down on the latch of the connector to secure. Note: If the cables do not touch the bottom of the con- nector, the keyboard function will be rendered useless. [...]
-
Page 45
CPU Thermal Plate “Battery Assembly” on page 36 “Keyboard” on page 39 1 2 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L (3) Bind head, black 3.2 kgf-cm w/ nylock paste Note: Make sure you use the correct screw for replacement. ThinkPad i Series 1400 41[...]
-
Page 46
RTC Battery, CPU EMI Shield and Hard Disk Drive “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 2 1 4 3 Safety Notice 4 The backup battery (1) is a lithium battery and can cause a fire, an explosion, or severe burns. Do not recharge it, remove its polarized connector, disassemble it, heat i[...]
-
Page 47
Reverse the steps described above when installing a new hard disk drive. CAUTION: Do not apply any shock to the hard disk drive. The hard disk drive is sensitive to physical shock. Incor- rect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk dirve, the user must have a backup copy of all the infor[...]
-
Page 48
PCMCIA Holder “Battery Assembly” on page 36 “Modem Board Cover and Modem Board” on page 38 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 1 Note: Before removing and replacing the PCMCIA holder, make sure that the PCMCIA cards are removed and the eject levers are not sticking out. 3 2 Attention: When removing t[...]
-
Page 49
LCD Assembly “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 2 1 1 3 5 4 8 6 7 Note: For 14.1–inch LCD models, a LVDS board is addi- tionally installed as shown at 3. Step Size (Quan- tity) Head & Color Torque Memo 2 M2.5 x 13.5L (2) Pan head, black 3.5 kgf-cm w/ nylock paste Note: Ma[...]
-
Page 50
Step Size (Quan- tity) Head & Color Torque Memo 3 M2 x 14L (2) (for 12.1-inch LCD assembly) Pan head, silver 1.6 kgf-cm M2 x 20L (2) (for 14.1-inch LCD assembly) Pan head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. 46 ThinkPad i Series 1400[...]
-
Page 51
Upper Cover (Keyboard Bezel) “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 1 4 3 2 5 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 13.5L (5) Pan head, black 3.2 kgf-cm w/ [...]
-
Page 52
6 Note: The upper cover has several latches. When removing the upper cover from the base cover, gently release these latches, then raise the side of the upper cover facing the palm rest to remove it. Be careful not to break the latches. Step Size (Quan- tity) Head & Color Torque Memo 2 M2.5 x 6L (1) Pan head, black 3.2 kgf-cm w/ nylock paste No[...]
-
Page 53
CD Control Card “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 1 3 5 6 4 Step Size (Quan- tity) Head & Color Torque Memo 1 M2 x 4L [...]
-
Page 54
Trajection Board and Modem Connector (RJ11 Cable Assembly) “Battery Assembly” on page 36 “Modem Board Cover and Modem Board” on page 38 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboa[...]
-
Page 55
DC/DC Charger “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 1 2 ThinkPad i Series 1400 51[...]
-
Page 56
Audio PCB and S-Video PCB “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 4 3 2 1 Step Size (Quan- tity) Head & Color Torque Memo 3 M2[...]
-
Page 57
Audio Cable and Speaker Cable “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 3 2 3 1 1 Step Size (Quan- tity) Head & Color Torque Mem[...]
-
Page 58
To install the speaker cable: When re-inserting the speaker cable, one end is connected to the Audio Con- nector Board underneath the palm rest. You then align the cable, following the border of the chassis and connect it to the inverter cable as shown in the diagram. 54 ThinkPad i Series 1400[...]
-
Page 59
Audio Connector Board “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 1 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L [...]
-
Page 60
Fan Assembly “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 3 2 1 4 Step Size (Quan- tity) Head & Color Torque Memo 2 M2.5 x 6L (2) B[...]
-
Page 61
Diskette and CD-ROM/DVD-ROM Drives Assembly “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 2 1 5 4 3 Attention: You must pull out the C[...]
-
Page 62
CD-ROM/DVD-ROM-drive-emergency-eject hole to open the CD/DVD tray. CD-ROM/DVD-ROM Module 3 2 1 1 CAUTION: Do not diassemble the CD-ROM/DVD-ROM; there is no user adjustments or serviceable parts inside. The use of controls, adjustments or performing procedures other than those specified may result in hazardous radiation exposure. Do not apply any ex[...]
-
Page 63
Diskette Drive (FDD with Bezel) 6 4 5 7 4 Step Size (Quan- tity) Head & Color Torque Memo 4 M2.5 x 3.5L (4) Bind head, black 1.6 kgf-cm w/ nylock paste Note: Make sure you use the correct screw for replacement. ThinkPad i Series 1400 59[...]
-
Page 64
Planar Board “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 1 4 3 Notes: 1. When removing the planar board from the base cover, gently [...]
-
Page 65
LCD Front Cover (12.1-inch) “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 1 2 3 4 3 Note: When removing the LCD, take note of the following: 1. Be careful not to scratch the LCD cover wh[...]
-
Page 66
2. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches. 3. Gently push the two hooks (3) outward to remove the LCD front cover. Speakers “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI S[...]
-
Page 67
1 3 2 4 5 Note: There are adhesive tape attached to the micro- phone cable assembly. Do not forget to put them back when reinstalling. LCD Panel, LCD Cable and Inverter “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 ?[...]
-
Page 68
1 2 4 1 3 7 8 5 6 Attention: After you replace the LCD or inverter, follow the instructions in “Setting the LCD Panel ID” on page 30. Step Size (Quan- tity) Head & Color Torque Memo 1 M3 x 5L (2) (LCD) Bind head, black 3.2 kgf-cm M2 x 4L (2) (Inverter) Pan head, silver 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. 64[...]
-
Page 69
Hinge “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “LCD Front Cover (12.1-inch)” on page 61 2 2 1 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L (2) Bind head, [...]
-
Page 70
LCD Front Cover (14.1-inch) “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 1 2 3 3 4 Note: When removing the LCD, take note of the following: 1. Be careful not to scratch the LCD cover wh[...]
-
Page 71
2. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches. 3. Gently push the two hooks (3) outward to remove the LCD front cover. Speakers “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI S[...]
-
Page 72
1 3 2 5 4 Note: There are adhesive tape attached to the micro- phone cable assembly. Do not forget to put them back when reinstalling. LCD Panel, LCD Cable and Inverter “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 ?[...]
-
Page 73
1 2 1 3 4 5 6 7 8 Attention: After you replace the LCD or inverter, follow the instructions in “Setting the LCD Panel ID” on page 30. Step Size (Quan- tity) Head & Color Torque Memo 1 M3 x 5L (2) (LCD) Bind head, black 3.2 kgf-cm M2 x 4L (2) (Inverter) Pan head, silver 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. Th[...]
-
Page 74
2 2 1 Step Size (Quan- tity) Head & Color Torque Memo 1 M2 x 4L (4) Pan head, silver 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. 70 ThinkPad i Series 1400[...]
-
Page 75
Hinge “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “LCD Front Cover (12.1-inch)” on page 61 1 2 2 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L (2) Bind head, [...]
-
Page 76
Locations Front View 1. LCD latches 2. LCD 3. Speakers 4. Indicator panel 5. Internal modem port 6. PC Card slots 7. PC Card eject buttons 8. Diskette drive 9. Diskette-drive-activity indicator 10. Diskette eject button 11. CD-ROM/DVD-ROM drive 12. CD-ROM/DVD-ROM eject button 13. CD-ROM/DVD-ROM-drive-activity indicator 14. CD-ROM/DVD-ROM-drive-emer[...]
-
Page 77
24. Fn key 25. Built-in microphone Bottom View 1. Battery-pack latch 2. Tilt feet 3. Memory slot door Rear View 3 4 5 6 7 8 9 10 11 12 13 14 15 2 1 1. Power jack 2. Universal serial bus (USB) connector 3. External-input-device (PS/2) connector 4. Serial connector 5. Parallel connector 6. Expansion connector 7. External monitor connector 8. Security[...]
-
Page 78
13. Audio volume control 14. Battery pack Switch Locations There are two switches found on the system board. Refer to the tables below on how to set these switches. Note: There is no switch to set the CPU voltage and speed. The CPU board can sense the correct working voltage and speed itself. Keyboard Language (SW3, Switch 1, 2 and 3) Setting Passw[...]
-
Page 79
System Unit Parts Listing 1 2 3 4 5 32 6 7 28 29 30 31 8 22 23 24 25 25-1 26 27 13 12 11 10 9 ThinkPad i Series 1400 75[...]
-
Page 80
21-1 21 20 19 18 14 15 16 17 No. Description FRU No. Qty. 1 NAMEPLATE COVER ASM 10L1961 1 2 HEATSINK CPU 05K6236 1 3 PCMCIA HOLDER 05K5476 1 4 HDD MODULE ASSY 6.4 GB 05K9116 1 HDD MODULE ASSY 4.8 GB 05K9115 1 5 KITTING, HDD 05K5677 1 6 CD CONTROL CARD 10L1170 1 7 TRACKPOINT BOARD 10L1317 1 8 CD ROM CHASSIS 05K5678 1 9 FPC DVD 27L0468 1 FPC CD ROM 0[...]
-
Page 81
No. Description FRU No. Qty. DIMM 64MB 10L1227 1 20 LI-ION BATTERY ASM (9 CELLS) 02K6577 1 21 BOTTOM CASE (W/ TV OUT) 05K6239 1 BOTTOM CASE (W/O TV OUT) 27L6572 1 21-1 LEG (L,R) 05K5953 1 22 RTC BATTERY 11J8591 1 23 AUDIO PCB (FOR LI-ION) 10L1316 1 24 FAN ASM 27L6475 1 25 S TERMINAL BOARD ASM 10L1286 1 25–1 S-VIDEO BRACKET 27L6476 1 26 DC/DC CHAR[...]
-
Page 82
No. Description FRU No. Qty. KEYBOARD (API – 1ST SOURCE) KEYBOARD (US) 02K6368 1 KEYBOARD (JAPAN) 02K6382 1 KEYBOARD (GERMANY) 02K6370 1 KEYBOARD (TRADITIONAL CHINESE) 02K6383 1 KEYBOARD (DANISH) 02K6376 1 KEYBOARD (FRANCE) 02K6372 1 KEYBOARD (KOREA) 02K6384 1 KEYBOARD (UK) 02K6371 1 KEYBOARD (CANADIAN FRENCH) 02K6369 1 KEYBOARD (NORWEGIAN) 02K63[...]
-
Page 83
LCD Unit Parts Listing 12.1" LCD Unit Parts Listing 2 1 3-1 3 4 9 5-1 7 5 6 8 No. Description FRU No. Qty. 1 LCD BEZEL ASM 12.1" 05K5674 1 2 SPEAKER ASM (R,L) 05K2827 1 3 HINGE (R,L) 05K5669 1 3-1 HINGE COVER (R,L) 05K5949 1 4 12.1" TFT LCD (SANYO) 05K9528 1 5 FPC 12.1" ASSY 27L0477 1 5–1 LCD FPC HOLDER KIT 27L6477 1 ThinkPad [...]
-
Page 84
No. Description FRU No. Qty. 6 LCD INVERTER 12.1" 10L1380 1 7 LED BD 10L1168 1 8 LCD REAR COVER ASM 12.1" TFT 05K6303 1 9 CABLE ASSEMBLY 05K2798 1 LG/IBM LOGO KIT 05K6044 1 80 ThinkPad i Series 1400[...]
-
Page 85
14.1" LCD Unit Parts Listing 3 2 1 3-1 4 9 10 9 5-1 11 12 5 6 7 8 No. Description FRU No. Qty. 1 LCD BEZEL ASM 14.1" 05K6232 1 2 SPEAKER ASM (R,L) FOR 14.1" 02K6299 1 3 HINGE (R,L) FOR 14.1" 05K6234 1 3-1 HINGE COVER (R,L) 05K5949 1 4 14.1" TFT LCD (LG) 05K9396 1 14.1" TFT LCD (IBM) 05K9538 1 5 FPC 14.1" ASSY 05K2[...]
-
Page 86
No. Description FRU No. Qty. 5–1 LCD FPC HOLDER KIT 27L6477 1 6 LCD INVERTER 14.1" 10L1383 1 7 LED BD 14.1" 10L1315 1 8 LCD REAR COVER ASM 14.1" TFT 05K6231 1 9 14.1" TFT BRACKET (R,L) 05K6233 1 10 CABLE ASSEMBLY 05K2798 1 11 LVDS COVER 05K5960 1 12 LVDS BOARD 10L1318 1 LG/IBM LOGO KIT FOR 14.1" BEZEL 05K6310 1 82 ThinkPa[...]
-
Page 87
Miscellaneous Parts Description FRU No. Qty. KITTING PACK FOR RUBBER RUBBER FOOT-F LCD SIDE SCREW CAP LCD BLIND CAP 05K5954 POINTING STICK CAP 84G6536 PORT REPLICATOR 05K5594 MYLAR PACK 05K6040 SCREW KIT SCREW MACH PAN M2*14L NI SCREW MACH PAN M2*4L NI SCREW WAFER NYLO M2.5*6L B-ZN SCREW M3*5L 700 SCREW M2.5*L 13.5 STEEL SCREW MACH PAN M2*20L NI SC[...]
-
Page 88
Telephone/Modem Description FRU No. Qty. MODEM CABLE (GERMAN) 27L0441 MODEM CABLE (UK, NZ) 27L0442 MODEM CABLE (FRANCE) 27L0443 MODEM CABLE (HOLLAND) 27L0444 MODEM CABLE (SWEDEN) 27L0445 MODEM CABLE (NORWAY/FIN) 27L0446 MODEM CABLE (DANISH) 27L0447 MODEM CABLE (ITALY) 27L0448 MODEM CABLE (AUSTRIA) 27L0449 MODEM CABLE (SPAIN) 27L0450 MODEM CABLE (BE[...]
-
Page 89
Power Cord Description FRU No. Qty. US/CANADA/TAIWAN 76H3516 EUROPE 76H3518 UK 76H3524 ITALY 76H3530 SWITZERLAND 76H3528 JAPAN 13H5273 CHINA 02K0539 KOREA 76H3535 AUSTRALIA/NEW ZEALAND 76H3514 ThinkPad i Series 1400 85[...]
-
Page 90
Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any refer- ence to an IBM product, program, or service is not intended to state or imply that only IBM product, program, or service may be used. Subject to IBM's valid intel[...]
-
Page 91
IBM Part Number: 37L5192 Printed in U.S.A. S37L-5192-ðð[...]