Jeep Commander (2006) manuel d'utilisation

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 1 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE .............................. 7 3 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 ▫ Roll Over W arning ..................... 5 䡵 How T o Use This Manual .................. 7 䡵 W arnings And Cautions ................... 7 䡵 V ehicle Identification Number ............... 8 䡵 V ehicle Modifications / Alterations ........... 9 1 I n f o r m a t i o n P r [...]

INTRODUCTION Thank you for selecting a Jeep 威 Commander and wel- come to our worldwide family . This is a specialized utility vehicle designed for both on-road and off-road use. It can go places and perform tasks for which conventional two-wheel drive vehicles were not intended. However , on-road ride and handling will have a differ ent feel from[...]

Roll Over W arning Utility vehicles have a significantly higher roll over rate than other types of vehicles. This vehicle has a higher ground clearance, higher center of gravity , and narrower track than many passenger cars. It is capable of perform- ing better in a wide variety of off-road applications. Driven in an unsafe manner , all vehicles ca[...]

Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually . In a roll over crash an unbelted person is si[...]

W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of Califor[...]

VEHICLE IDENTIFICA TION NUMBER The vehicle identification number (VIN) is found on a label located on the left front corner of the instrument panel pad, visible fr om outside of the vehicle through the windshield. This number also appears on the Automobile Information Disclosure Label affixed to a window on your vehicle. Save this label for a conve[...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 9 1 I n f o r m a t i o n P r o v i d e d b y :[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 4 ▫ Ignition Key .......................... 1 4 ▫ Key-In-Ignition Reminder ................ 1 5 䡵 Sentry Key Immobilizer System .............. 1 5 ▫ Important Note About Service ............. 1 6 ▫ Replacement Keys ....................[...]

▫ T ransmitter Battery Service ............... 2 4 䡵 Security Alarm System — If Equipped ......... 2 5 ▫ T o S e t T h e A l a r m ...................... 2 6 ▫ T o Disarm The System ................... 2 6 䡵 Liftgate ............................... 2 7 ▫ Liftgate Flipper Glass ................... 2 8 䡵 Power W indows ...............[...]

䡵 Safety T ips ............................ 6 9 ▫ Exhaust Gas .......................... 6 9 ▫ Safety Checks Y ou Should Make Inside The V e h i c l e .............................. 7 0 ▫ Safety Checks Y ou Should Make Outside The V e h i c l e .............................. 7 1 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 13 2 I n f o r m [...]

A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number . The key code can also be obtained by your authorized dealer from your vehicle invoice. Ignition Key Insert the key fully , then turn the swi[...]

Key-In-Ignition Reminder If the driver’s door is opened when the key is in the ignition and not turned to the ON position, a chime will sound to remind you to remove the key . CAUTION! Always remove the key from the ignition, and lock all doors when leaving the vehicle unattended. SENTR Y KEY IMMOBILIZER SYSTEM The Sentry Key Immobilizer System ([...]

If the SKIM indicator light comes on during normal vehicle operation (it has been running for longer than 10 seconds) a fault has been detected in the electronics and the vehicle should be serviced as soon as possible. NOTE: • The Sentry Key Immobilizer System is not compatible with remote starting systems. Use of these systems may result in vehi[...]

consists of programming a blank key to the vehicle electronics. A blank key is one which has never been programmed. NOTE: When having the Sentry Key System serviced, bring all vehicle keys to the dealer . Customer Key Programming Y ou can program new keys to the system if you have two valid keys by doing the following: 1. Cut the additional Sentry [...]

2. This device must accept any interference that may be received, including interference that may cause undes- ired operation. ILLUMINA TED ENTR Y The interior lights come on when you open any door . They will remain on for about 30 seconds after all doors are closed then fade to off. The lights also will fade to off if you turn on the ignition aft[...]

CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Child Protection Locks The rear doors of your vehicle are equipped with child protection locks. If you push up on the lever on the open edge of the door it cannot be opened from the inside [...]

Power Door Locks A door lock switch is on each front door panel. Press this switch to lock or unlock the doors. If the plunger is down when the door is closed, the door will lock. Ther efore, make sur e the keys ar e not inside the vehicle before closing the door . If you pr ess the door lock switch while the keys are in the ignition switch, and th[...]

Automatic Unlock on Exit Feature — Only A vailable if Auto Lock is Enabled This feature will unlock all the doors when the driver’s door is opened if the vehicle is stopped and in P (Park) or N (Neutral). Refer to “Electronic V ehicle Information Center (EVIC) — Customer Programmable Features” in Section 4 of this manual or see your autho[...]

NOTE: If desired, the system can be programmed to unlock all doors on the first press of the “Unlock” button. Refer to “Remote Unlock Driver’s Door 1st” in the Personal Settings section of the “Electronic V ehicle Infor- mation Center (EVIC)”, or simply follow these steps: 1. Press and hold the “Lock” button for 4 to 10 seconds. 2[...]

W ARNING! Driving with the flipper glass open can allow poi- sonous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the flipper glass closed when you are operating the vehicle. Using The Panic Alarm T o turn the panic alarm feature ON or OFF , press and hold the P ANIC button on the transmitter for at[...]

2. While the “Unlock” button is pressed, (after 4 seconds) press the “Lock” button. Release both buttons. The “Flash Lights On Lock/Unlock” feature can be reactivated by repeating this procedure. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following c[...]

2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the transmitter case, join the two halves of the case together . Install and tighten the screw until snug. Make sure there is an even “gap” be[...]

T o Set the Alarm The alarm will set when you use the r emote keyless entry transmitter to lock the doors and liftgate or when you use the power door lock switch while the door is open. After all the doors are locked and closed, a red light (located in the instrument cluster) will flash rapidly for about 16 seconds to signal that the system is armi[...]

LIFTGA TE T o open the liftgate, pull up (squeeze) on the handle and lift. Manually unlocking the vehicle doors with the plunger or a key in the lock cylinder will not unlock the liftgate. W ARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. Y ou and your pas- sengers could be injured by these fumes. Keep th[...]

Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked. T o open the flipper glass, push up on the window switch located on the liftgate. W ARNING! T o avoid injury stand back when opening. Glass will automatically rise. Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper [...]

POWER WINDOWS The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the fr ont passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSORY position. The power window switches remain ac[...]

Auto Down Both the driver and front passenger window switch has an “Auto Down” feature. Press the window switch past the first detent, release, and the window will go down automatically . T o cancel the “Auto Down” movement, operate the switch in either the up or down dir ection and release the switch. T o stop the window from going all the[...]

W ARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset. T o reset Auto-Up: Pull the window switch up and close the window com- pletely , then pull and hold th[...]

open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with the sunr oof open, adjust the sunr oof opening to minimize the buffeting. OCCUP ANT RESTRAINTS Some of the most important safety featur es in your vehicle are the restraint systems. These include the front and rear seat belts for the d[...]

Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at a[...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. Latch Plate 34 THINGS TO KNOW BEFORE [...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. A belt that is[...]

4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! A lap belt worn too high can increase th[...]

6. T o release the belt, push the red button marked PRESS on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodicall[...]

As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position. Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- locke[...]

This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner . This feature is designed to help reduce the belt force acting on the occupant’s chest. W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly “automatic locking re- tractor” feature or any other seat [...]

Enhanced Seat Belt Use Reminder System (BeltAlert) If the driver or front passenger seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt. The driver should also inst[...]

The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this procedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver or fr ont passenger seat belt remains unfastened. Seat Belts and Pregnant Women W e recommend that pregnant[...]

Driver And Front Passenger Supplemental Restraint Systems (SRS) This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrument panel, above the glove compartment. The words [...]

This vehicle also is equipped with window bags to protect the driver , front, and rear passengers sitting next to a window . They are located above the side windows. Their covers are also labeled SRS/AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. W ARNING! • Do not put anything [...]

The front airbags have a multi stage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity . Along with the seat belts, front airbags work with the instrument panel knee bol- sters to provide improved protection for the driver and front passenger . W indow bags also work with seat belts to[...]

Children that are not big enough to properly wear the vehicle seat belt should be secured in the rear seat, in a child restraint or belt-positioning booster seat. Older children who do not use child restraints or belt- positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind [...]

W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags. • Being too close to the steering wheel or instru- ment panel during airbag de[...]

• Driver and Front Passenger Seat Belt Pretensioner • Occupant Classification System (OCS) — Front Pas- senger Seat Only − Occupant Classification Module − Passenger Airbag Disable (P AD) Indicator Light − W eight Sensors How The Airbag System W orks • The Occupant Restraint Control (ORC) Module de- termines if a fr ontal, side, or r [...]

W ARNING! Ignoring the “Airbag W arning Light” in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away . • The Occupant Classification System (OCS) is part of [...]

The “P AD Indicator Light” should not be illuminated when teenagers, most children in a forward-facing child restraint or booster seats, most children that can properly wear the vehicle’s seat belt, and when an adult passenger is properly seated in the front passen- ger seat. In this case, the airbag is ready to be inflated if a collision req[...]

Front Passenger Seat Occupant Passenger Air- bag Disable (P AD) Indicator Light Airbag Status Adult OFF ON Grocery Bags, Heavy Briefcases and Other Rela- tively Light Ob- jects ON OFF Empty or V ery Small Objects OFF* OFF * Since the system senses weight, some small objects will turn the P AD Indicator Light on. The OCS classifies an occupant using[...]

because this can also affect occupant classification. Also, if you fold down the rear seat check to be sure it doesn’t touch the front passenger seat. If the front passenger seat is damaged in any way , it should only be serviced by an authorized dealer . If the seat is removed (or even if the seat attachment bolts are loosened or tightened in an[...]

The driver front airbag gas is vented through the vent holes in the sides of the airbag. The passenger front airbag gas is vented thr ough the vent holes in the sides of the airbag. In this way , the airbags do not interfere with your control of the vehicle. • The Occupant Classification Module (OCM) is lo- cated beneath the front passenger seat.[...]

The front passenger seat assembly contains critical com- ponents that affect the front passenger airbag deploy- ment. Correctly functioning front passenger seat compo- nents are critical for the Occupant Classification System (OCS) to properly classify the front passenger and calcu- late the proper airbag deployment. Do not make any modifications t[...]

W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent. A modified vehicle ma[...]

• As the airbags deflate you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, m[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

with other data gathered during a complete accident investigation, the electronic data may be used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle perfor- mance. In addition to crash investigations initiated by DaimlerChrysler Corporation, su[...]

Data Parameters that May Be Recorded: • Diagnostic trouble code(s) and warning lamp status for electronically-contr olled safety systems, including the airbag system • Airbag disable lamp status (if equipped) • ⬙ Ti m e ⬙ of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag deployment level (if applicable) •[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper re[...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward facing infant restraint should only be used in a rear seat. A rearward [...]

belt tight, however , any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary). For the second and third row seat belts with the automatic locking retractor , pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the bu[...]

Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction, are for chil- dren who weigh 20 to 40 lbs (9 to 18 kg), and who are older than one year . These child seat[...]

LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CH ildren) Y our vehicle’s second r ow seat is equipped with the child restraint anchorage system called LA TCH. The LA TCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anc[...]

The second row outboard seating positions have lower anchorages that are capable of accommodating LA TCH- compatible child seats having flexible, webbing-mounted lower attachments. Child seats with fixed lower attach- ments must be installed in the outboard positions only . Regardless of the specific type of lower attachment, NEVER install LA TCH-c[...]

In addition, there ar e tether strap anchorages behind each rear outboard seating position located on the back of the seat. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Forward- fa[...]

hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. Y ou will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages. Next attach the lower hooks or connectors over the top of the anchorage bars, push[...]

If the seat belt has a automatic locking retractor , it will have a distinctive label. Pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then, pull the belt until it is all extracted from the retractor . Allow the belt to return to the retractor , pulli[...]

Route the tether strap over the seat back and attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether over the head rests, and attach the hook to the tether anchor located on the back of the seat. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and[...]

The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur . The r ecommended viscosity and quality grades are shown in Section 7 of this manual. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NE[...]

• Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for a extended period. If the vehicle is stopped in an open area with engine running for more than a short period, adjust the v[...]

Defrosters Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should feel the air directed against the windshield. Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 M i r r o r s ............................... 7 8 ▫ Inside Day/Night Mirror ................. 7 8 ▫ Inside Automatic Dimming Mirror — If Equipped .......................... 7 9 ▫ Exterior Mirrors Folding Feature ........... 8 0 ▫ Outside Mirrors ....................... 8 0 ▫ Heat[...]

▫ Front Seat Adjustment — Recline .......... 1 0 6 ▫ Manual Lumbar Support Adjustment ....... 1 0 6 ▫ Head Restraints ...................... 1 0 7 ▫ 8 - W ay Driver’s Power Seat .............. 1 0 8 ▫ 4 - W ay Passenger’s Power Seat — If Equipped ......................... 1 0 8 ▫ Heated Seats—If Equipped .............. 1 0 8 ?[...]

▫ Lights-On Reminder ................... 1 2 5 ▫ Fog Lights — If Equipped ............... 1 2 6 ▫ T urn Signals ......................... 1 2 6 ▫ High Beam Switch .................... 1 2 6 ▫ Passing Light ........................ 1 2 6 ▫ Headlight T ime Delay .................. 1 2 7 䡵 W indshield W ipers And W ashers ............ [...]

䡵 Electronic Speed Control .................. 1 4 8 ▫ T o Activate .......................... 1 4 9 ▫ T o Set At a Desired Speed ............... 1 4 9 ▫ T o Deactivate ........................ 1 4 9 ▫ T o Resume Speed ..................... 1 4 9 ▫ T o V ary The Speed Setting ............... 1 5 0 ▫ T o Accelerate For Passing .........[...]

▫ Sunroof Fully Closed ................... 1 6 1 䡵 Command-V iew™ Skylights — If Equipped .... 1 6 1 䡵 Power Outlet .......................... 1 6 2 䡵 Cup Holders .......................... 1 6 4 䡵 Cargo Area Features ..................... 1 6 6 ▫ Cargo Load Floor ..................... 1 6 6 䡵 Rear W indow Features ...............[...]

MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window . A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted while set in the day position (toward windshield). Annoying headlight glare from vehicles behind you can be reduced by movi[...]

Inside Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. Y ou can turn the feature on or off by pressing the button at the base of the mirror . A light next to the button will indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror during[...]

Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either forward or rearwar d to resist damage. The hinges have three detent positions; full forward, full rearwar d, and normal. Outside Mirrors T o receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of t[...]

Power Remote Control Outside Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror move the knob in the same direction you want the mirror to move. Use the center off position to guard against a[...]

Lighted V anity Mirrors — If Equipped T o access a lighted vanity mirror , flip down one of the visors. Lift the cover to reveal the mirror . The light will turn on automatically . Sun V isor Extension This feature has a pull out extension on the sun visor for increased coverage. HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect?[...]

UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro- phone for private conversation. The UConnect™ phonebook enables you to stor e up to 32 names and four numbers per name. Each language has a separate 32 name phonebook accessible only [...]

The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features. Refer to your cellular service provider or the phone manufac[...]

example, you can either use the combined form voice command ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two voice com- mands: ⬙ Phonebook ⬙ and ⬙ New Entry . ⬙ Please remem- ber , the UConnect™ system works best when you talk in a normal conversational tone, as if speaking to some one sitting eight feet a[...]

NOTE: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the voice on beep, sa[...]

phones are present in the vehicle, the UConnect™ system will use the priority 3 cellular phone when you make a call. Y ou can select to use a lower priority cellular phone at any time (refer to ⬙ Advanced Phone Connectivity ⬙ ). Dial by Saying a Number • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the follo[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙ John Doe, ⬙ where John Doe is a previ- ously stored name entry in the UConnect™ phone- book. Refer to ⬙ Add Names to Y our UConnect™ Phonebook, ⬙ to learn how to store a name in the phonebook. • The UConne[...]

four associated phone numbers and designations. Each language has a separate 32 name phonebook accessible only in that language. Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep,[...]

• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose. T o select one of the entries from the list, press [...]

• T o call one of the names in the list, press the ⬙ V oice Recognition’ button during the playing of the desired name and say ⬙ Call. ⬙ NOTE: the user can also exercise ⬙ Edit ⬙ or ⬙ Delete ⬙ operations at this point. • The UConnect™ system will then prompt you as to number designation you wish to call. • The selected numbe[...]

Making a Second Call while Current Call in Progress T o make a second call while you are currently in a call, press the ’V oice Recognition’ button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in pr ogress. T o go back to the first [...]

Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Redial. ⬙ • The UConnect™ [...]

• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UCon[...]

Y our phone must be turned on and paired to the UCon- nect™ system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. T owing Assistance If you need towing assistance, • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the[...]

When calling a number with your UConnect™ system that normally r equires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’V oice Recognition’ button and say the sequence you wish to enter followed by the word ⬙ Send. ⬙ For example, if required to enter your pin number followed with a poun d3746# ,y o [...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played through[...]

Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc. related information. Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred t[...]

Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously paired to the UConnect™ system that you want to use it with. • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Select Phone[...]

Things Y ou Should Know About Y our UConnect™ System V oice Recognition (VR) • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sur e that no one other than you is speaking during a voice recognition period. • Perfor[...]

• Y ou can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). ⬙ 800 ⬙ must be spoken ⬙ eight-zero-zer o. ⬙ • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. Far End Audio Performance • Audio quality is maximized under: • low-to-medium b[...]

102 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 103 3 I n f o r m a t i o n P r o v i d e d b y :[...]

104 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up [...]

Front Seat Adjustment — Recline T o adjust the seatback, lift the lever located on the outboard side of the seat, lean back, and release the lever at the desired position. T o return the seatback, lift the lever , lean forward, and release the lever . W ARNING! Do not ride with the seatback reclined so that the seat belt is no longer resting agai[...]

Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear . Adjustable head restraints should be adjusted so that the upper edge is as high as practical. The head restraints have a locking button which must be pushed in to lower the head restraint to all positions. The restraints may be raised witho[...]

8 - W ay Driver’s Power Seat The driver’s power seat switches are located on the outboard side of the driver’s seat lower side trim. The bottom switch controls up/down, forwar d/rearward, and tilt adjustment. The top switch controls the seatback recline adjustment. 4 - W ay Passenger’s Power Seat — If Equipped The front passenger’s powe[...]

indicate the level of heat in use. T wo LEDs are illumi- nated for high, one for low , and none for off. Pr essing the switch once will select high-level heating. Pressing the switch a second time will select low-level heating. Pressing the switch a third time will shut the heating elements off. When high-temperature heating is selected, the heater[...]

1. Pull up on the seatback lever located on the outboard side of the seat. NOTE: Also, pulling upward on this handle allows the outboard seating positions to be reclined. 2. Fold the seatback down, and tumble the seat forward. W ARNING! Do not drive the vehicle with the outer second row seats in the tumbled position. The outer second row seats are [...]

NOTE: If sitting in the third row seat, pull rearward on the r elease strap located at the r ear of the seat and tumble the seat forward. Fold and T umble Seat Release Strap UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 1 1 3 I n f o r m a t i o n P r o v i d e d b y :[...]

Folding Middle Seatback (Second Row Seat) 1. Pull the release strap. 2. Lower the center seatback. Center Seat Armrest (Second Row Seat) — If Equipped The second row center seat may be equipped with a armrest. Pull strap to lower armrest. Release Strap Folding Center Seatback 1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n[...]

50/50 Third Row Folding Seat T o Lower Rear Seat Either side of the third row seat can be lowered to allow for extended cargo space, and still maintain some rear seating room. 1. Open the tailgate. 2. Push the seatback r elease handle (towar d rear of vehicle), and lower the seatback using the pull strap. 3. Close the tailgate. Armrest (Second Row [...]

T o Raise Rear Seat 1. Open the tailgate. 2. Detach pull strap from back of seat, and pull seatback upward until it locks into place. Reattach strap. 3. Raise the head restraints. 4. Close the tailgate. W ARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play[...]

Y our vehicle may have been delivered with two Remote Keyless Entry transmitters. One or both transmitters can be linked to either memory position. The memory system can accommodate up to four transmitters, each one linked to either of the two memory positions. Setting Memory Positions and Linking Remote Keyless Entry T ransmitter to Memory NOTE: E[...]

5. T urn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6. T urn the ignition switch to the OFF position and remove the key . 7. Press and release the SET (S) button located on the driver’s door . 8. W ithin 5 seconds, press and release memory button 1 or 2 on the driver’s door . The next step must b[...]

T o recall the memory settings for driver one, press memory button number 1 on the driver’s door or the “Unlock” button on the Remote Keyless Entry transmit- ter linked to memory position 1. T o recall the memory setting for driver two, press memory button number 2 on the driver’s door or the “Unlock” button on the Remote Keyless Entry [...]

NOTE: Once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to Remote Linked to Memory under ⬙ Electronic V ehicle Information Center (EVIC) — Customer Pro- grammable Features ⬙ in Section 4 for more information. Easy Entry/Exit Seat This feature provides automatic driver’s seat positioning [...]

NOTE: The Easy Entry Easy Exit feature is not enabled when the vehicle is delivered from the factory . The Easy Entry Easy Exit feature is enabled (or later disabled) through the programmable features in the Electronic V ehicle Information Center (EVIC). Refer to ⬙ Electronic V ehicle Information Center (EVIC) — Customer Pro- grammable Features[...]

Then, reach under the hood, move safety latch to the left, and lift the hood. T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Be s[...]

Courtesy/Reading Lights Each light can be turned on by pressing the recessed area of the lens. T o turn these lights of f, press the r ecessed area of the lens a second time. There are also reading lights located above the rear doors. Each light can be turned on by pressing the front recessed area of the lens. T o turn these lights off, press the r[...]

Multi-Function Control Lever The multi-function control lever controls the operation of the headlights, turn signals, headlight beam selection, instrument panel light dimming, passing light, interior courtesy/dome lights, and optional fog lights. T urn Signal Auto-Mode — If Equipped T ap the multi-function control lever once and the turn signal ([...]

Automatic Headlight System — If Equipped T urn the end of the multi-function control lever to the third detent to activate the automatic headlight system. This system performs two functions. W ith the engine running and the multi-function control lever in the A (Auto) position, the headlights will turn on and off based on the surrounding light le[...]

NOTE: When your headlights come on during the daytime, the instrument panel lights will automatically dim to the lower nighttime intensity . Refer to “Instru- ment Panel and Interior Lights” below for setting the instrument panel lights to full daytime intensity . SmartBeams — If Equipped The SmartBeam system provides incr eased forwar d ligh[...]

headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions (sticker , toll box, etc.) on the windshield or camera lens will cause the system to function improperly . Instrument Panel and Interior Lights When the multi-function control lever is in the parklight, headlight, or A (Auto) position (if equipped), rot[...]

Fog Lights — If Equipped The fog light switch is located in the multi- function control lever . T o activate the fog lights, turn on the park/turn lights, low beam headlights, or “Auto” headlights and pull out the end of the multi- function control lever . A light in the instrument cluster shows when the fog lights are on. NOTE: T urning on t[...]

Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60, or 90 seconds after the ignition switch is turned OFF . T o activate the headlight delay , the multi- function control lever must be rotated to the “Off” position after the ignition switch is turned OFF . Only the headlights will illuminate durin[...]

T o use the washer , pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for several seconds after the lever is released, and then resume the intermit- tent interval previously selected. If the lever is pulled while in the OFF position, the wipers will operate for severa[...]

Rain Sensing Wipers—If Equipped This feature senses moistur e on the windshield and automatically activates the wipers for the driver . The feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the multi-function lever to one of five settings to activate this feature. The sen[...]

driver desires more sensitivity . Place the wiper switch in the OFF position when not using the system. NOTE: • The rain sensing feature will not operate when the wiper switch is in the LOW or HIGH speed position. • The rain sensing feature may not function properly when ice, or dried salt water is present on the wind- shield. • Use of Rain-X[...]

TIL T STEERING COLUMN T o tilt the column, push down on the lever below the turn signal control and move the wheel up or down, as desired. Pull the lever back towards you and firmly push the lever until it is above the lower surface of the shroud to lock the column in place. W ARNING! T ilting the steering wheel column while the vehicle is moving i[...]

ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressur e to prevent wheel lock-up and help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System” in Section 5 of this manual for more information about ABS[...]

TCS (T raction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability . A featur e of the TCS system functions similar to a limited slip differential and contr[...]

W ARNING! BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe, attentive, a[...]

NOTE: Anytime the ESP system is in the “Full Off” mode, ERM is disabled. Refer to ESP (Electronic Stability Program) for a complete explanation of the available ESP modes. W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . ERM cannot prevent all[...]

• Understeer - when the vehicle is turning less than appropriate for the steering wheel position. The ⬙ ESP/TCS Indicator Light ⬙ located in the instrument cluster , starts to flash as soon as the tir es lose traction and the ESP system becomes active. The ⬙ ESP/TCS Indicator Light ⬙ also flashes when TCS is active. If the ⬙ ESP/TCS Ind[...]

High Range (4WD Models) or 2WD Models On This is the normal operating mode for ESP in 4WD high range and in 2WD vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4WD low range or neutral back to 4WD high range, the ESP system will be in this mode. This mode should be used for most all driving situations. E[...]

NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand, or gravel, it may be desirable to switch to the “Partial Off” mode by pressing the ESP switch. Once the situation requiring ESP to be switched to the “Partial Off” mode is overcome, turn ESP back on by momentarily depressing the ?[...]

W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for off-highway or off-road use only . 4WD Low Range Partial Of f This is the normal oper[...]

Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. (See page 186 for more informa- tion.) T o turn ESP on again, momentarily depress the “ESP Control Switch”. This will restore the normal “Par- tial Off” mode of operation in 4wd low range. NOTE: The “E[...]

If the “ESP/BAS W arning Lamp” comes on continuously with the engine running, a mal- function has been detected in either the ESP or the BAS system, or both. If this light r emains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possib[...]

Rear Park Assist Sensors The four Rear Park Assist Sensors, located in the rear fascia, monitor the area behind the vehicle that is within the sensors’ field of view . The monitored area seems oval in shape. The sensors can detect obstacles from approximately 1 1.8 inches (30 cm) up to 59 inches (150 cm) from the rear fascia in the horizontal dir[...]

When the obstacle is detected at a distance of about 59 inches (150 cm) from the rear fascia, the outermost LEDs of the warning display will be ON with increased bright- ness. Along with the LED, a half second tone will occur . As the distance of the detected obstacle to the rear fascia decreases, mor e LEDs ar e illuminated. When the warning displ[...]

Enable/Disable the Rear Park Assist System The Rear Park Assist System can be enabled and disabled with a switch located in the switch bank of the instru- ment panel. When the switch is pressed to disable the system, the instrument cluster will display the ⬙ P ARK ASSIST DIS- ABLED ⬙ message. Refer to “Electronic V ehicle Informa- tion Center[...]

Service the Rear Park Assist System When the Rear Park Assist System is defective, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the ⬙ SER VICE P ARK ASSIST SYSTEM ⬙ message. Refer to “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual. Cleaning the Rear Park Assist [...]

W ARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before back- ing up. Y ou are responsible for safety and must continue to pay attention to your s[...]

ADJUST ABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedals to move toward the driver to provide improved position with the steering wheel. The adjustable pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. The position of the brake and accelerator pedals ca[...]

• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Contr ol is ON. A message will be displayed in the Electronic V ehicle Information Center (EVIC) if the pedals are attempted to be ad- justed when the system is locked out (“Adjustable Pedal Disabled — Cruise Cont[...]

T o Activate Press the ON·OFF button to turn the system ON. T o turn the system OFF , press the ON·OFF button again. The system should be turned OFF when not in use. The CRUISE indicator light in the instrument cluster will illuminate when the system is ON. T o Set at a Desired Speed When the vehicle has reached the desired speed, press and relea[...]

T o V ary the Speed Setting When the Speed Control is ON, speed can be increased by pressing and holding the RES·ACCEL button. When the button is released, a new set speed will be estab- lished. T apping the RES·ACCEL button once will result in a 2 mph (3 km/h) (3.7L/4.7L Models) or a 1 mph (2 km/h) (5.7L Models) speed increase. Each time the but[...]

W ARNING! Leaving the Speed Control ON when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you aren’t using it. Driving Up or Down Hills When going up or down hills, it is possible for your vehicle to lose or gai[...]

OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and optional power sunroof switches. GARAGE DOOR OPENER — IF EQUIPPED The HomeLink 威 Universal T ransceiver replaces up to three remote controls (hand held transmitters) that oper- ate devices such as [...]

W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards. This includes most garage door opener mod- els manufactured after [...]

Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being pr ogrammed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal. The Electronic V ehicle Informatio[...]

2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed. NOTE: Some gate operators and garage door openers may r equire you[...]

NOTE: T o program the remaining two HomeLink but- tons, begin with ⬙ Programming ⬙ step two. Do not repeat step one. NOTE: If your hand-held transmitter appears to pro- gram the universal transceiver , but your garage door does not operate using the transmitter and your garage door opener was manufactured after 1995, your garage door opener may[...]

Canadian Programming/Gate Programming Canadian radio-frequency laws require transmitter sig- nals to ⬙ time-out ⬙ (or quit) after several seconds of transmission which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators ar e designed to ⬙ time-out ⬙ in the sam[...]

• Press and hold the two outer HomeLink buttons and release only when the EVIC display shows “CHAN- NELS CLEARED” (after 20 seconds). Release both buttons. Do not hold for longer that 30 seconds. HomeLink is now in the train (or learning) mode and can be programmed at any time beginning with ⬙ Pro- gramming ⬙ - Step 2. Reprogramming a Sin[...]

HomeLink 威 is a trademark owned by Johnson Controls, Inc. POWER SUNROOF — IF EQUIPPED The power sunroof switch is located on the overhead console. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the pow[...]

Opening Sunroof - Express Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully , then stop automatically . This is called Express Open. During Express Open operation, any movement of the sunroof switch will stop the sunroof. Closing Sunroof - Express Press the switch forward a[...]

Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind bu[...]

NOTE: Hold onto shade handle until shade is com- pletely open or closed. POWER OUTLET T o the right of the convenience tray (lower center of instrument panel) is an outlet for electrically powered accessories. Pull lightly on the tab of the plastic cover to access the outlet. Roller Shade Front Power Outlet 162 UNDERST ANDING THE FEA TURES OF YOUR [...]

The rear power outlet (if equipped) is located in the left rear cargo area. The power outlets are a direct feed from the battery so they receive power whether the ignition is in the ON or OFF position. All accessories connected to this outlet should be re- moved or turned off when the vehicle is not in use to protect the battery against discharge. [...]

CAUTION! Electrical Outlet Use W ith Engine Off • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories [...]

NOTE: The cup holder insert is removable, from the console, for cleaning. It can be reinstalled with the larger cup depression towards the passenger seat, but the top surface will not be flush with the console surface. Cup Holders (Second Row Seat) The second row seat has two cup holders in the center armrest. Lower the center armr est. Refer to ?[...]

Cup Holders (Third Row Seat) The third row seat passengers have cup holders on the left and right rear trim panels. CARGO AREA FEA TURES Cargo Load Floor The panel in the load floor is reversible for added utility . One side is carpeted and the other side features a plastic lined tray which holds a variety of items. The cargo load floor is held by [...]

NOTE: The cargo load floor latches should not be used as cargo tie-downs. 1. Flip up pull loop(s) so they ar e perpendicular (straight up) to the top surface of the tray . 2. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray . 3. Lift tray over loop(s), and reposition tray . 4. Pull up on loop(s) and twist 90[...]

5. Push loop(s) back down, so they are parallel to the top of the tray . REAR WINDOW FEA TURES Rear Window Wiper/W asher A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch up to the DEL (Delay) position or the ON position will activate the wiper . Rotating the ce[...]

the rear wiper switch or the ignition switch needs to be turned OFF and ON to restart the rear wiper . Adding W asher Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment on the passenger side and should be checked for fluid level at regular intervals. Fill t[...]

NOTE: If the rear cross rail (or any metallic object) is placed over the satellite radio antenna (if equipped), you may experience interruption of satellite radio reception. For improved satellite radio reception, place the rear cross rail in detent position #4 when not in use. CAUTION! • T o prevent damage to the roof of your vehicle, DO NOT car[...]

W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack “Cautions” when carrying cargo on your roof rack. UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 171 3 I n f o r m a t i o n P r o v[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel And Interior Controls ....... 1 7 6 䡵 Instrument Cluster ...................... 1 7 7 䡵 Instrument Cluster Description ............. 1 7 8 䡵 Electronic V ehicle Information Center — If Equipped ........................... 1 8 6 ▫ Customer Programmable Features ......... 1[...]

▫ Operation Instructions - (CD Mode For CD Audio Play) ........... 2 0 6 ▫ Load/Eject Button (CD Mode For CD Audio Play) ........... 2 0 8 ▫ Notes On Playing MP3 Files ............. 2 1 0 ▫ Operation Instructions - (CD Mode For MP3 Audio Play) .......... 2 1 2 ▫ Load/Eject Button (CD Mode For MP3 Play) . . 212 䡵 Sales Code REF — AM/FM[...]

▫ Selecting Satellite Mode In REF Radios ...... 2 2 7 ▫ Selecting Satellite Mode In RAQ Radios ..... 2 2 7 ▫ Selecting a Channel .................... 2 2 8 ▫ Storing And Selecting Pre-Set Channels ...... 2 2 8 ▫ Using The PTY (Program T ype) Button — If Equipped ......................... 2 2 8 ▫ PTY Button ⬙ Scan ⬙ ...............[...]

INSTRUMENT P ANEL AND INTERIOR CONTROLS 176 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 177 4 I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER DESCRIPTION 1. Speedometer Indicates vehicle speed. 2. Brake W arning Light The BRAKE warning light will come on when the ignition is first turned on, and stay on briefly as a bulb check. If the bulb does not come on during starting, have the bulb re- paired promptly . If the light stays on longer , it may be an indication that t[...]

engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc. may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In mos[...]

If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer . 8. T achometer The red segments indicate the maximum permissible engine revolutions-[...]

prevailing road conditions. The “ESP/TCS Indicator Light” will flash any time the ESP or TCS is active and helping to improve vehicle stability . If the “ESP/TCS Indicator Light” is on solid, the ESP system has been turned off by the driver or a temporary condition exists that will not allow full ESP function. (See page 131 for more informa[...]

13. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowe[...]

14. Electronic V ehicle Information Center Display When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages. Refer to “Electronic V ehicle Information Cen- ter” later in this section. (See page 186 for more informa- tion.) 15. TOW/HAUL Indicator Light This light will illuminate when th[...]

or remain on continuously . Refer to ⬙ Enhanced Driver Seat Belt Reminder System (BeltAlert) ⬙ in the Occupant Restraints section for more information. 19. Cruise Indicator Light This indicator lights when the speed control system is turned ON. 20. Odometer The odometer shows the total distance the vehicle has been driven. U.S. federal regulati[...]

when the engine is running, immediate service is re- quired and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may requir e towing. The light will come on when the ignition is first turned on and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked[...]

ELECTRONIC VEHICLE INFORMA TION CENTER — IF EQUIPPED The electronic vehicle information center (EVIC) located in the instrument cluster , when the appropriate condi- tions exist, will display the following messages and symbols. Some of the messages are accompanied by a chime. • TURN SIGNAL ON • PERFORM SER VICE • KEY NOT PROGRAMMED — DAMA[...]

• LIFTGA TE/DOOR OPEN (with graphic) • LIFTGA TE/DOORS OPEN (with graphic) • LIFTGLASS OPEN (with graphic) • HOOD OPEN (with graphic) • HOOD/DOOR OPEN (with graphic) • HOOD/DOORS OPEN (with graphic) • LIFTGA TE/HOOD OPEN (with graphic) • HOOD/GLASS/DOOR OPEN (with graphic) • HOOD/GLASS/DOORS OPEN (with graphic) • HOOD/GA TE/DOOR[...]

• CHECK GAS CAP • ESP OFF • MEMOR Y #1 POSITIONS SET • MEMOR Y #2 POSITIONS SET • MEMOR Y SYSTEM DISABLED — SEA TBEL T F AS- TENED (with graphic) • MEMOR Y SYSTEM DISABLED — VEHICLE NOT IN P ARK • DRIVER 1 MEMOR Y • DRIVER 2 MEMOR Y • PEDAL ADJUST DISABLED — CRUISE CONTROL SET • PEDAL ADJUST DISABLED — SHIFTER IN RE- VER[...]

Customer Programmable Features Press the MENU button until one of the display choices following appears: Language? When in this display you may select one of three lan- guages for all display nomenclature, including the trip computer functions. Press the STEP button while in this display selects English, Espanol, or Francais. As you continue the di[...]

Display U.S. or Metric? Pressing the STEP button when in this display selects US or Metric. The overhead console and instrument panel displays will be in the selected units. Auto Door Locks? When this feature is selected, all doors and the liftgate lock automatically when the speed of the vehicle reaches 15 mph (25 km/h). Pressing the STEP button w[...]

memory set position using the door mounted switch. Pressing the STEP button when in this display will select “Y es” or “No.” Sound Horn W ith Lock? When this feature is selected a short horn sound will occur when the remote keyless entry “Lock” button is pressed. This featur e may be selected with or without the flash lights on lock/unl[...]

this display will select “Low Beam” or “Low/High Beam.” Refer to “Lights — SmartBeams” in Section 3 of this manual. NOTE: System will activate at or above 20 mph (32 km/h). Headlamps On W ith W ipers? (A vailable with Auto Headlights Only) When this feature is selected and the headlight switch has at least once been moved to the A (Au[...]

Easy Entry/Exit Seat? (A vailable with Memory Seat Only) This feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. The Easy Entry/ Easy Exit feature is not enabled when the vehicle is delivered fr om the factory . The Easy Entry/ Easy Exit feature is enabled (or later disabled) throu[...]

W ARNING! Even if the display still reads a few degrees above 32°F ( 0°C), the road surface may be icy , particularly in woods or on bridges. Drive carefully under such conditions to prevent an accident and possible per- sonal injury or property damage. Compass/T emperature Display 194 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P[...]

T rip Computer This feature, located in the instrument cluster , displays the following information when the display is in the “Compass/T emperature” mode and the STEP button is pressed: Step Button Press the STEP button to cycle through all of the Compass/Mini-T rip Computer displays. Step Button UNDERST ANDING YOUR INSTRUMENT P ANEL 195 4 I n[...]

Reset Button Press the RESET button to reset the display you are in. Press and hold the RESET button (for 2 seconds) to reset all of the displays. A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds. Then, the history information [...]

Elapsed T ime Shows the accumulated ignition ON time since the last reset. T ire Pressure Display — If Equipped Shows the current pressure of all 4 road tires. NOTE: T ires heat up during normal driving conditions. Heat will cause the tire pressur e to increase from 2 to 6 psi (14 to 41 kPa) during normal driving conditions. Refer to “T ire Inf[...]

NOTE: T o ensure proper compass calibration, make sure the compass variance is properly set before manu- ally calibrating the compass. Refer to V ariance Map. T o Put Into a Calibration Mode Start the engine and leave the transmission in the P (Park) position. Set the display to “Compass/T emperature.” Press and hold the C/T button for approxim[...]

T o set the variance: T urn the ignition ON and set the display to “Compass/T emperature.” Press the C/T but- ton for approximately 5 seconds. The last variance zone number will be displayed. Press and hold the STEP button for 1 second to select the new variance zone and press the RESET button to resume normal operation. RADIO GENERAL INFORMA T[...]

T wo T ypes of Signals There are two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary ... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound. Electrical Disturbances Radio waves may pick up electrical di[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in [...]

SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Pr ess the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion. Holding the button will bypass station[...]

2. Adjust the hours by turning the right side T une / Audio control. 3. After the hours are adjusted, press the right side T une / Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une / Audio control. 5. T o exit, press any button/knob or wait 5 seconds. R W/FF (Radio Mode) Pressing the[...]

Press the r otary TUNE control a fifth time and F ADE will display . T urn the TUNE control to the left or right to adjust the sound level between the front and rear speak- ers. Press the rotary TUNE control again to exit setting tone, balance and fade. RND/PTY Button (Radio Mode) Pressing this button once will turn on the PTY mode for 5 seconds. I[...]

Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues Rhythm_and_Blues Religious Music Religious_Music Religious T alk Religious_T alk Rock Rock Soft Soft Soft Rock Soft_Rock Soft Rhythm and Blues Soft_R_&_B Sports Sports Ta l k Ta l k T op 40 T op_40 W eather W eather By pressing the SEEK button when the PTY [...]

Y ou may add a second station to each push-button by repeating the above procedur e with this exception: Press the SET/DIR button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM,12 FM and 12 Satellite (if equipped) stations to be stor ed into push-button me[...]

CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the d[...]

LOAD/EJECT Button (CD Mode for CD Audio Play) LOAD/ EJECT - Load Press the LOAD/ EJECT button and the push- button with the corresponding number where the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSER T DISC. After the radio displays ⬙ LOAD DISC ⬙ insert the CD into the player . Radio display will show ⬙ LOA[...]

TIME Button (CD MODE for CD Audio Play) Press this button to change the display from a large CD playing time display to a small CD playing time display . R W/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The R W (Reverse) butto[...]

Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CD-ROM, CD-R and CD-R W . Supported Medium Formats (File Systems[...]

Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

LOAD / EJECT - Eject Press the LOAD/ EJECT button and the push- button with the corresponding number where the CD was loaded and the disc will unload and move to the entrance for easy r emoval. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to remove the disc. If you have ejected a disc and have not[...]

AM/FM Button (CD Mode for MP3 Play) Switches back to Radio mode. RND/ PTY Button (CD Mode for MP3 Play) Pressing this button plays files randomly . SET/DIR Button (CD Mode for MP3 Play) Press the SET/DIR Button to display folders, when playing an MP3 discs that have a file/folder structure. T urn the TUNE control to display available folders or mov[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in [...]

SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Pr ess the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion. Holding the button will bypass station[...]

2. Adjust the hours by turning the right side T une/ Audio control. 3. After the hours are adjusted, press the right side T une/Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une/Audio control. 5. T o exit, press any button/knob or wait 5 seconds. R W/FF (Radio Mode) Pressing the rewi[...]

Press the r otary TUNE control a fifth time and F ADE will be displayed. T urn the TUNE control to the left or right to adjust the sound level between the front and rear speak- ers. Press the tune control again or wait 5 seconds to exit setting tone, balance, and fade. RND/SET Button (Radio Mode) T o SET The Push-Button Memory When you are receivin[...]

Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display . If the volume control is ON, the unit will switch to CD mode and begin to play . The display will show the track number and p[...]

EJECT Button (CD Mode) Press this button and the disc will unload and move to the entrance for easy removal. The unit will switch to the last selected mode. If you do not r emove the disc within 15 seconds, it will be reloaded. The radio mode will continue to appear . TIME Button (CD Mode) Press this button to change the display from elapsed CD pla[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , cassette player or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. The auxiliary mode becomes active when an electrical d[...]

TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day . The time of day will be displayed for 5 seconds. R W/FF (Auxiliary Mode) No function. RND/SET Button (Auxiliary Mode) No function. Mode Button (Auxiliary Mode) Press the mode button repeatedly to select between the CD player or Satellite [...]

Satellite Navigation Radio with CD Player with MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with an integrated color screen to provide maps, turn identification, selection menus and instructions for selecting a variety of destina- tions and routes, AM/FM stereo radio and six-disc CD changer with MP3 capability[...]

VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-powered remote control, and two head- sets. The DVD player is mounted in the rear of the center console storage bin, and is concealed by a door that lifts up for[...]

The LCD screen is located on the headliner behind the front seats. Lowering the Display Screen Remote Control Location UNDERST ANDING YOUR INSTRUMENT P ANEL 225 4 I n f o r m a t i o n P r o v i d e d b y :[...]

SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio. This service offers over 100 channels of music, sports, news, entertainment, and programming for chil- dren, dir ectly from its[...]

first four digits are displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed. ESN/SID Access with RAQ Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seco[...]

Selecting a Channel Press and release the SEEK or TUNE buttons to sear ch for the next channel. Press the top of the button to search up and the bottom of the button to sear ch down. Holding the TUNE button causes the radio to bypass channels until the button is released. Press and release the SCAN button (if equipped) to automatically change chann[...]

NOTE: Pr essing the ⬙ SEEK ⬙ or ⬙ SCAN ⬙ button while performing a music type scan will change the channel by one and stop the search. Pressing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button ⴖ SEEK ⴖ When the desired program is obtained, press the ⬙ SEEK ⬙ button wit[...]

REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a push-button in the center and controls the volume and mode of the sound system. Pressing the top of the rocker swit[...]

The button located in the center of the left hand control will tune to the next preset station that you have pro- grammed in the radio preset push-button. CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the [...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

Press this button to turn on and off the air condi- tioning. Cool dehumidified air comes through the outlets selected by the mode selector . Press the button a second time to turn off the air conditioning. The button includes an LED that illuminates when compres- sor operation is selected. Electric Rear W indow Defroster Press this button to turn o[...]

T emperature Control The temperature of air can be selected by rotating the center temperature control knob. The coldest temperature setting is on the extreme left and the warmest setting on the extreme right of the rotation. The knob can be posi- tioned at any point on the dial. Mode Selection The mode selector (the right rotary knob) can be place[...]

Bi-Level Air flows both through the outlets located in the instrument panel and those located on the floor . Air flows through the registers in the back of the center console, and under the front seats to the rear seat passengers. These registers can be closed to partially block airflow . The center console outlets deliver condi- tioned air while t[...]

Operating Tips 236 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

Automatic T emperature Control — If Equipped The Infrared Dual-Zone Climate Control System auto- matically maintains the interior comfort level desired by the driver and passenger . This is accomplished by a dual sun-sensor in the top of the instrument panel, and an infrared sensor located in the face of the control unit. There are also various s[...]

LO AUTO position should be used for front seat occu- pants only . The HI AUTO position should be used when more air flow is desired, or when rear seat occupants are present. Dial in the comfort setting you would like the system to maintain by rotating the driver’s or passenger’s control knob. Once the comfort level is selected the system will m[...]

NOTE: • The surface of the climate control panel, and the top center of the instrument panel should be kept free of debris due to the climate control sensor’s location. Mud on the windshield may also cause poor operation of this system. • T o provide you with maximum comfort in the auto- matic mode, during cold start-ups the blower fan will r[...]

240 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

NOTE: Regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively . The operator can override the AUTO mode setting and select the direction of the air by rotating the right mode knob to one of the follow[...]

Air flows through the registers in the back of the center console, and under the front seats to the rear seat passengers. These registers can be closed to block airflow . The center console outlets deliver conditioned air while the floor outlets deliver heated air . • Panel Air flows through the outlets located in the in- strument panel. Air flow[...]

This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. The recir culation mode should only be used temporarily . The button includes an LED that illuminates, which indicates that the recir cula- tion mode is active. Y ou may use this feature separately . NOTE: Extended use of recir culation may caus[...]

Rear Mode Control If rear heating/cooling is desir ed, pr ess the “Rear On/Off Switch” (located in the upper switch bank above the controls) and select “Floor” “Bi-Level” or “Panel” from the Rear Control Panel (right knob located on the right rear quarter trim panel). • Floor Air flows through the floor outlet located on the right[...]

• Bi-Level Air flows through both the outlets located in the rear quarter trim panels, and the one located on the floor . The rear quarter trim panel outlets can be closed to block airflow . • Panel Air flows through the outlets located in the rear quarter trim panels. These registers can be closed to block airflow . Rear Blower Control The lef[...]

• When the temperature knob is in the cold (Blue) position, cold air will be delivered from the outlets. As the temperature knob is turned towards the hot (Red) position, the air will get warmer . Summer Operation The engine cooling system in air conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corro[...]

Window Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost, and turning on the high blower . The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem increase blower speed. V ehicle windows tend to fog on the ins[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 2 5 3 ▫ Normal Starting ...................... 2 5 3 ▫ Extreme Cold W eather (Below –20°F (–29°C) . . 254 ▫ If Engine Fails T o Start ................. 2 5 4 ▫ After Starting ........................ 2 5 5 䡵 Engine Block Heater — If Equipped .........[...]

䡵 Anti-Lock Brake System .................. 2 7 1 䡵 Power Steering ........................ 2 7 4 䡵 On-Road Driving T ips ................... 2 7 5 䡵 Off-Road Driving T ips ................... 2 7 6 ▫ When T o Use 4WD Low Range — If Equipped ......................... 2 7 6 ▫ Driving Through W ater ................. 2 7 6 ▫ Driving I[...]

䡵 T ire Pressur e Monitor System (TPMS) ........ 2 9 7 ▫ Base System ......................... 2 9 7 ▫ Premium System ...................... 2 9 9 ▫ General Information ................... 3 0 3 䡵 T ire Chains ........................... 3 0 3 䡵 T ire Rotation Recommendations ............ 3 0 4 䡵 Fuel Requirements ....................[...]

▫ T owing – 2WD Models ................. 3 2 3 ▫ T owing — Quadra-T rac I (Single-Speed T ransfer Case) 4WD Models .... 3 2 3 ▫ T owing — Quadra–T rac II /Quadra–Drive II 4WD Models ........................ 3 2 4 䡵 Snow Plow ........................... 3 2 8 252 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death. The gear selector must be in the N (Neutral) or P (Park) position before[...]

W ARNING! Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . Extreme Cold Weather (below –20°F (–29°C) T o insur e reliable starting at these temperatur es, use of an externally power ed electric engine bloc[...]

After Starting The idle speed will automatically decrease as the engine warms up. CAUTION! Long periods of engine idling, especially at high engine speeds can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heate[...]

TRANSMISSION SHIFTING 5–Speed Automatic T ransmission The electr onically controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle, may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles. [...]

W ARNING! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is id[...]

W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should apply the park brake, shift the transmission into P (Park), and remove the key from the ignition. Once the key is removed from the ignition the[...]

shifter is in the D (Drive) position, allowing the selection of the desired top gear . For example, if the driver shifts the transmission into 3 (third gear), the transmission will never shift above third gear , but can shift down to 2 (second) or 1 (first), when needed. W ARNING! Do not downshift for additional engine braking on a slippery surface[...]

NOTE: If the vehicle is started in extremely cold tem- peratures, the transmission may not shift into Overdrive and will automatically select the most desirable gear for operation at this temperature. Normal operation will resume when the transmission fluid temperature has risen to a suitable level. Refer also to the Note under torque converter clu[...]

overheating or failure due to excessive shifting. When operating in “TOW/HAUL” mode, the transmission will shift to 3rd gear and 4th will be enabled under steady cruise conditions. The “TOW/HAUL” light will illuminate in the instru- ment cluster to indicate when the switch has been activated. Pressing the switch a second time restores norma[...]

4. W ait approximately 10 seconds, then restart the en- gine. 5. Move the shift lever to the desired gear range. If the problem is no longer detected, the transmission will return to normal operation. If the pr oblem persists, P (Park), R (Reverse), and N (Neutral) will continue to operate. Only Second gear range will operate in the D (Drive) shift[...]

cause damage to the transmission. The torque converter will refill within five seconds of shifting from Park into any other gear position. Rocking the V ehicle If the vehicle becomes stuck in snow , sand, or mud, it can often be moved by a rocking motion. Move the gear selector rhythmically between D (Drive) and R (Reverse), while applying slight p[...]

FOUR-WHEEL DRIVE OPERA TION Quadra-T rac I 姞 Operating Instructions/Precautions — If Equipped The Quadra-T rac I 威 is a single speed (HI range only) transfer case which provides convenient full-time 4–wheel drive. No driver interaction is requir ed. This transfer case divides engine tor que almost evenly with 48 percent of engine torque to [...]

road surfaces only . Driving in the 4 LOW position on dry hard surfaced roads may cause increased tire wear and damage to driveline components. When operating your vehicle in 4 LOW , the engine speed is approximately three times that of the 4 HI position at a given road speed. T ake care not to overspeed the engine and do not exceed 25 mph (40 km/h[...]

N (Neutral) Neutral — Disengages both the fr ont and r ear driveshafts from the powertrain. T o be used for flat towing behind another vehicle. Refer to “Recreational T owing” in Sec- tion 5 of this manual. 4 LOW Four Wheel Drive Low Range — Low speed 4 wheel drive. Locks the front and rear driveshafts together . Forces the front and rear w[...]

4L O Wt o4H I W ith the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into N (Neutral), and raise the transfer case T -handle. The “4WD LOW Indicator Lamp” in the instrument cluster will flash and go out when the shift is complete. Release the T -handle. NOTE: If shift conditions/interlocks are [...]

Neutral (N) Shift Procedure 1. Key ON, engine off. 2. V ehicle stopped, with foot on brake. 3. Place transmission in N (Neutral). 4. Hold down N (Neutral) “pin” switch (with a pen, etc.) for 4 seconds until the LED lamp by the switch starts to blink indicating shift in pr ogress. Lamp will stop blinking (stay on solid) when Neutral shift is com[...]

NOTE: If shift conditions/interlocks are not met, a “CHECK SHIFT PROCEDURES” message will flash fr om the EVIC (Electronic V ehicle Information Center). Refer to “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual. (See page 186 for mor e information.) Quadra-Drive II 姞 System — If Equipped The optional Quadra-Dr[...]

NOTE: The instrument cluster “Brake W arning Light” indicates only that the parking brake is applied. It does not indicate the degree of brake application. Before leaving the vehicle parked on a hill, you must make sure the parking brake is fully applied and place the gear selector in the P (Park) position. Make certain the transfer case is in [...]

W ARNING! • Leaving children unattended in a vehicle is dan- gerous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake or the gear selector lever . Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle. • Do not leave ch[...]

W ARNING! Significant over or under inflation of tires, or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring you may feel slight pedal movement. The mov[...]

W ARNING! • The Anti-Lock Brake System (ABS) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive spee[...]

• Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, repeated brak- ing can cause brake fade with loss of braking control. A void r epeated heavy braking by downshifting the [...]

NOTE: Increased noise levels at the end of the steering wheel travel ar e considered normal and does not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather , the power steering pump may make noise for a short period of time. This is due to the cold, thick fluid in the steering system. This noise s[...]

conventional 2-wheel drive vehicles any more than low- slung sports cars are designed to perform satisfactorily in off-r oad conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or vehicle rollover . OFF-ROAD DRIVING TIPS N[...]

caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water to minimize wave effects. Flowing W ater If the water is swift flowing and rising (as in storm run-of f) avoid crossing until the water level recedes and/or the flow rate is reduced. If you must cr oss flowing water avoid depths in excess of 9 inches. The flowing [...]

Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4WD LOW . Use first gear and 4WD LOW for very steep hills. If you stall or begin to lose headway while climbing a steep hill, allow[...]

T raction Downhill Shift the transmission into a low gear and the transfer case to 4WD LOW range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to control the vehicle speed and direction. When descending mountains or hills, repeated braking can cause brake fade with loss o[...]

W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. Y ou might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary . • If you experience unusual vibration after driving[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards. T ires designed to this standard have [...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light T ruck tire based on U.S. design standards T = T emporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspe[...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the T[...]

Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the t[...]

3) the tire size designed for your vehicle 4) the cold tire inflation pressures for the front, rear and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and col[...]

4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available car go and luggage load capacity is 650 lb. (since 5 x 150 = 750, and 1400 – 750 = 650 lb.) 5. Determine the combined weight o[...]

288 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory op[...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tr ead life r esulting in a need for earlier tire replacement. Under inflation also increases tire r olling resistance and results in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stability?[...]

check tire pressur e. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap–if equipped. This will prevent moisture and dirt from entering the valve stem, which cou[...]

Tire Pressures for High Speed Operation The manufactur er advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important. Increased tire pressure and reduced vehicle loading may be requir ed for hig[...]

Radial-Ply Tires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial tires in sets of four . Never combine them with other types of tires. Cuts and punctures in radial tires are repairable only in the tread area because[...]

T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves and will appear as bands when the tread depth becomes 1/16 inch (2 mm). When the indicators appear in 2 or more adjacent gr ooves, the tire [...]

W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident result- ing in serious injury or death. Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect [...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle. This can cause unpredictable handling and stress to steeri[...]

Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear . TIRE PRESSURE MONITOR SYSTEM (TPMS) Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electr onic senso[...]

NOTE: For vehicles with optional wheel/tire sizes and significantly different tire placard pressur es, the placard pressur e value and the low-pr essure threshold value is re-pr ogrammable at your authorized dealer to accommo- date the customer selected wheel/tire combinations rec- ommended by DaimlerChrysler Corporation. CAUTION! The TPMS has been[...]

CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the wheel rim sensor . NOTE: • The TPMS can inform the driver of a low tire pressure condition. • The TPMS is not intended to replace normal tire care and maintenanc[...]

when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and reset. The T ire Pressur e Monitor System (TPMS) consists of the following components: • Receiver Module • 5 Wheel Sensors (including Full Size Spare T ire) • 4 Wheel Sensor T rigger Modules • T ire Pressur e Monitoring[...]

T elltale Light” will illuminate continuously (solid) and shall remain illuminated until the warning condition is removed/r eset. NOTE: The “T ire Pressure Monitoring T elltale Light” will only illuminate for the four active road tires. A low spare tire pressure will not cause the “T ire Pressur e Monitoring T elltale Light” to illuminate[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style. After-market wheels can cause sensor damage. [...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration. The tire pressur e sensors ar[...]

TIRE ROT A TION RECOMMENDA TIONS T ires on the front and rear axles of vehicles operate at differ ent loads and perform different steering, handling, and braking functions. For these reasons, they wear at unequal rates, and develop irregular wear patterns. These effects can be reduced by timely rotation of tires. The benefits of rotation are especi[...]

FUEL REQUIREMENTS 3.7/4.7L Engines (If Equipped) All engines (except 5.7L engines) are de- signed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality un- leaded “regular” gasoline having an oc- tane rating of 87. The use of premium gasoline is not recommended. Under normal conditions, the[...]

Over 40 auto manufacturer’s world wide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufactur er recom- mends the use of gasoline that meets the WWFC speci- fications if they a[...]

MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles. The man[...]

• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your dealer for service assistance. • The use of fuel additives which are now bein[...]

• Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gas[...]

CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting after- market cap can cause the MIL (Malfunction Indica- tor Light) to illuminate, due to fuel vapors escaping from the system. • T urn the eng[...]

Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “CHECK GAS CAP” message will be displayed in the EVIC (Electronic V ehicle Information Center). Refer to “Electronic V ehicle Information Center” in Section 4 of this manual. (See page 186 for more[...]

W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trai[...]

Gross Combination W eight Rating (GCWR) The gross combination weight rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings in- clude a 150 lbs (68 kg) allowance for the presence of a driver). Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and [...]

hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. W eight-Distributing Hitch A weight-distributing hitch includes a receiver attached to the tow vehicle, plus a removable hitch head and spring bar assembly that fits into the receiver opening and hook up brackets that connect the sp[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmission Model GVWR (Gross V e- hicle Wt. Rating) GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note 1) 3.7L/ Automatic 4x2 6[...]

Note 1 – The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the T ire and Loading Information placard. Refer to the T ire– Safety Information Section in this manual. T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the T ire and Loading Information plac- ard in the T ire Safety Information Section of this manual for the maximum[...]

W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou[...]

2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire inflation pressur es a[...]

− An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electr onically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − T railer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trail[...]

NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. [...]

If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the ”T ow/ Haul” mode (if equipped) or the “3” range should be sel[...]

− City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . − refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion. RECREA TIONAL TOWING (BEHIND MOTORHOME[...]

T owing — Quadra–T rac II /Quadra–Drive II 4WD Models CAUTION! Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. NOTE: The transfer case must be in the N (Neutral) position, and the transmission must be in the P (Park) p[...]

“Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. (See page 186 for more informa- tion.) 5. Start engine. 6. Shift transmission into D (Drive). 7. Release brake pedal and ensur e that ther e is no vehicle movement. 8. Shut the engine off. 9. Shift transmission into P (Park). 10. Place the ignition key in the OFF pos[...]

CAUTION! T ransmission damage may occur if the transmission is shifted into P (Park) with the transfer case in N (Neutral) and the engine running. With the transfer case in N (Neutral) ensure that the engine is OFF prior to shifting the transmission into P (Park) (refer to step s7–8 above). Shifting Out Of Neutral (N) Use the following procedure [...]

5. Shift transmission into P (Park). 6. Start the engine. 7. Shift transmission into D (Drive). NOTE: When shifting out of transfer case N (Neutral), turning the engine OFF may be required to avoid gear clash. W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without fir[...]

CAUTION! Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. SNOW PLOW Snow plows, winches, and other aftermarket equipment should not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in the front end structur e. The airbags could deploy unexpect- edly o[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flashers ................. 3 3 0 䡵 If Y our Engine Overheats ................. 3 3 1 䡵 Jacking And T ire Changing ................ 3 3 2 ▫ Jack Location ........................ 3 3 2 ▫ Spare T ire Stowage .................... 3 3 3 ▫ Spare T ire Removal .................... 3 3 4 ?[...]

HAZARD W ARNING FLASHERS Y our vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently . Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle. This is an emergency warning system, not t[...]

IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impen[...]

JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack i[...]

Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism. T o remove or stow the spare, use the jack handle to rotate the “spare tire drive” nut. The nut is located under a plastic cover at the center-r ear of the cargo floor area, just inside the liftgate opening. W ARNING! Do not use power [...]

Spare Tire Removal Fit the jack handle extension over the drive nut. Use the Lug W rench to rotate the nut counter clockwise until the spare is on the ground with enough slack in the cable to allow to pull the tire out from under the vehicle. CAUTION! The winch mechanism is designed for use with the jack extension tube only . Use of an air wrench o[...]

For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking Instructions 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the[...]

4. Locate the jack as shown. For the front axle, place it under the front lower control arm as shown. For the rear axle, place it under the axle near the wheel to be changed. Ensure the jack is closest to the inside of the wheel when jacking on the rear axle. Do not raise the vehicle until you are sure the jack is fully engaged. 5. Raise the vehicl[...]

W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Position the spar e wheel/tire on the vehicle and install the lug nuts with the cone-shaped end toward the wheel. Lightly ti[...]

NOTE: T ire should be stowed with the “beauty” side up. Storing the tire upside down may result in scratching or damage to the wheel face. Continue winching up the tire until you hear the winch “ratchet” three times. Double check to ensure the tire is snug against the underbody of the vehicle. Damage to the winch cable may result if the veh[...]

5. Connect the other cable, first to the negative terminal of the booster battery and then connect the other end to a non-paint metal surface on the engine of the vehicle with the discharged battery . Make sure you have a good contact on the engine. 6. Start the engine in the vehicle which has the booster battery , let the engine idle a few minutes[...]

• Be sure your vehicle is not touching the jump start vehicle. • Observe all Battery W arnings in Section 7 of this manual, while jump starting your vehicle. W ARNING! Do not attempt to push or tow your vehicle to get it started. Unburned fuel could enter the catalytic converter and, once the engine has started, ignite and damage the converter [...]

W ARNING! Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . TOWING A DISABLED VEHICLE 2WD Models Only Provided the transmission is operable, tow only in N (Neutral) at speeds not exceeding 30 mph (48 km/h), for distances of not more than 15 miles (24 km). T owing at more than 30 mph (48 [...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 3.7L Engine ........................... 3 4 5 䡵 4.7L Engine ........................... 3 4 6 䡵 5.7L Engine ........................... 3 4 7 䡵 Onboard Diagnostic System — OBD II ........ 3 4 8 ▫ Loose Fuel Filler Cap Message ............ 3 4 8 䡵 Emissions Inspection And Maintenance Programs ......[...]

▫ Air Conditioner Maintenance ............. 3 6 0 ▫ Power Steering Fluid Check .............. 3 6 1 ▫ Body Lubrication ..................... 3 6 3 ▫ W indshield W iper Blades ................ 3 6 3 ▫ W indshield W ashers — Front And Rear ..... 3 6 3 ▫ Exhaust System ...................... 3 6 4 ▫ Cooling System .....................[...]

3.7L ENGINE MAINT AINING YOUR VEHICLE 345 7 I n f o r m a t i o n P r o v i d e d b y :[...]

4.7L ENGINE 346 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

5.7L ENGINE MAINT AINING YOUR VEHICLE 347 7 I n f o r m a t i o n P r o v i d e d b y :[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly , your vehicle will provide excellent performance and fuel economy , as well[...]

cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is pr operly tightened. Pr ess the odometer reset button to turn the message off. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row , the system will tu[...]

4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition key or start the engine. This means that you[...]

DEALER SERVICE Y our dealer has the qualified service personnel, special tools and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions c[...]

could adversely affect the engine or vehicle performance. These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the[...]

• More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C) • T railer towing • T axi, Police, or delivery service (Commercial Service) • Off road or desert operation • If equipped for and operating with E-85 (ethanol) fuel If ANY of these apply to you, then change your engine oil every 3,000 miles[...]

American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils that meet the requirements of DaimlerChrysler Material Stan- dard MS-6395. Use Mopar 威 or an equivalent oil meeting the specifi-[...]

Materials Added to Engine Oils The manufacturer strongly recommends against the ad- dition of any additives (other than leak detection dyes) to engine oil. Engine oil is an engineered product and it’s performance may be impaired by supplemental addi- tives. Disposing of Used Engine Oil Care should be taken in disposing of the used engine oil from[...]

Belts should be inspected for evidence of cuts, cracks, glazing, or frayed cords and replaced if there is indication of damage which could result in belt failure. Low gen- erator belt tension can cause battery failure. Also, check belt routing to make sure there is no inter- ference between the belts and other engine components. Spark Plugs Spark p[...]

CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly . Contin- ued operation of your vehicle with a severe malfunction could cause the co[...]

T o minimize the possibility of catalytic converter damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic[...]

W ARNING! The air cleaner can provide protection in the case of engine backfire. Do not remove the air cleaner unless it is necessary for repair or maintenance. Make sure that no one is near the engine compart- ment before starting the vehicle with the air cleaner removed. Failure to do so can result in serious personal injury . Maintenance-Free Ba[...]

T o determine the battery charge, check the battery test indicator (if equipped) on top of the battery . Refer to the illustration. CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked (+) positive [...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information B[...]

CAUTION! Do not use Automatic T ransmission Fluid (A TF) or other types of power steering fluids when servicing the power steering system of this vehicle. Damage to the power steering system can result from the use of the wrong power steering fluid. Checking the power steering fluid level at a defined service interval is not required. The fluid sho[...]

Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, tailgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear . Prior to the appli- cation of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubrica[...]

The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment (on the driver side), and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not antifreeze/coolant) and operate the system for a few seconds to flush out t[...]

Cooling System W ARNING! Y ou or others can be badly burned by hot antifreeze/ coolant or steam from your radiator . If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot. Engine Coolant Checks Che[...]

Cooling System — Drain, Flush, And Refill At the intervals shown in the appropriate “Maintenance Schedule,” the system should be drained, flushed, and refilled. If the solution is dirty and contains a considerable amount of sediment, clean and flush with r eliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits [...]

Adding Engine Coolant Y our vehicle has been built with an impr oved antifreeze/ coolant that allows extended maintenance intervals. This antifreeze/coolant can be used up to 5 Y ears or 100,000 miles before replacement. T o prevent reducing this ex- tended maintenance period, it is important that you use the same antifreeze/coolant throughout the [...]

The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precaution. Never add antifreeze/coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat cause[...]

When additional antifreeze/coolant is needed to main- tain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the front of the engine compartment. This is nor- mally a result of moisture from[...]

ONL Y the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. Hoses and V acuum/V apor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage. Hard or soft spots, brittle rubber , cracking, tears, cuts, abrasions, and exces- sive[...]

Brake and Power Steering System Hoses When servicing the vehicle for scheduled maintenance, inspect surface of hoses for evidence of heat and me- chanical damage. Hard and brittle rubber , cracking, tears, cuts, abrasion, and excessive swelling suggest deteriora- tion of the rubber . Particular attention should be made to examining those hose surfa[...]

fluid reservoir . W ith disc brakes, fluid level can be expected to fall as the brake pads wear . However , low fluid level may be caused by a leak and a checkup may be needed. Use only manufacturer’s recommended brake fluid, refer to Fluids, Lubricants, and Genuine Parts for correct fluid type. W ARNING! Use of a brake fluid that may have a lowe[...]

for corr ect fluid type. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid. CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than [...]

5. Remove the dipstick, wipe it clean and reinsert it until seated. 6. Remove the dipstick again and note the fluid level on both sides. The fluid level should be between the “HOT” (upper) reference holes on the dipstick at normal operat- ing temperature. The fluid level is only valid if there is a solid coating of oil is seen on both sides of [...]

Special Additives The manufacturer recommends against the addition of any additives to the transmission. Exception to this policy is the use of special dyes to aid in detecting fluid leaks. T ransfer Case Fluid Level Check Inspect the transfer case for fluid leaks. If a fluid leak is found, the transfer case fluid level can be checked by removing t[...]

Front/Rear Axle Fluid Front Axle Fluid Level Check Lubricant should be to the bottom of the oil fill hole. Rear Axle Fluid Level Check Lubricant should be 1/2” (1 cm) below the oil fill hole. Adding Fluid Add lubricant only at the fill hole and only to the level specified above. Selection of Lubricant Use only manufacturer’s recommended fluid, [...]

CAUTION! Under frequent heavy-duty driving conditions, change all lubricants and lubricate body compo- nents, all driveline joints and steering linkage more often than in normal service to prevent excessive wear . Appearance Care And Protection From Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary accordin[...]

• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use Mopar 威 Super Kleen Bug and T ar Remover to remove. • Use Mopar 威 Cleaner W ax to remove road film, stains, and to protect your paint finish. T ake care never to scratch the paint. • A void using abrasive compounds and power buffing that may diminish the[...]

• Aluminum wheels should be cleaned regularly with a mild soap and water to prevent corrosion. T o remove heavy soil, use Mopar 威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush or metal polishes. Only Mopar 威 cleaners are recommended. Do not use oven cleaner . A void automatic[...]

do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia based cleaners to clean your leather upholstery . Application of a leather conditioner is not requir ed to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may [...]

Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use Mopar 威 T otal Clean, a mild soap solution, or lukewarm water . Do not remove the belts from the vehicle to wash them. Replace the belts if th[...]

Cavity Fuse/Color Description 1 30 Amp Pink Audio Amp (B+) 2 15 Amp Blue Sunroof (B+) 3 10 Amp Red Htd Mirror (EBL) 4 20 Amp Y ellow Rr Pwr Out (B+) 5 10 Amp Red Rr HV AC (R/O) 6 10 Amp Red OCM (B+) 7 20 Amp Y ellow Door Locks (B+) 8 15 Amp Blue Steer Col Lock (B+) 9 20 Amp Y ellow Pwr Outlet (B+) 10 10 Amp Red Ign Run Only Out (R/O) 1 1 Spar e 12 [...]

Underhood Fuses (Power Distribution Center) Cavity Fuse/Color Description 1 40 Amp Green HV AC Blower 2 30 Amp Pink Power Outlets 3 30 Amp Pink Rr W iper/Ign R/O Cavity Fuse/Color Description 4 30 Amp Pink ABS Pump 5 50 Amp Red Cabin Htr 1 (Diesel Only) 6 50 Amp Red ASD 7 30 Amp Pink Rr HV AC (XK) 8 40 Amp Green Acc Delay/Seats 9 Spare 10 40 Amp Gr[...]

Cavity Fuse/Color Description 20 20 Amp Y ellow PCM Batt (Gasoline Only) 21 30 Amp Pink ABS V alves 22 Spare 23 20 Amp Y ellow FDCM 24 20 Amp Y ellow Fuel Pump 25 20 Amp Y ellow FDCM/E-Diff. 26 15 Amp Blue Hyd/PCM (Diesel Only) 27 15 Amp Blue Brake/Stop Lamps 28 25 Amp Natural NGC/Injectors 29 Spare 30 Spare 31 Mini Relay Cabin Htr 1 Rly (Diesel On[...]

Underhood Fuses (Integrated Power Module) Cavity Fuse/Color Description 1 Micro Relay W iper On/Off Rly 2 Micro Relay W iper Hi/Lo Rly 3 Micro Relay Horn Rly Cavity Fuse/Color Description 4 Micro Relay Rear Fog Rly (BUX Only) 5 Micro Relay Lt T -T ow Stop/T urn Rly 6 Micro Relay Rt T -T ow Stop/T urn Rly 7 Micro Relay Park Lamps Rly 8 10 Amp Red Lt[...]

Cavity Fuse/Color Description 20 20 Amp Y ellow FCM Batt #3 21 20 Amp Y ellow Rt T -T ow Stop/T urn 22 30 Amp Pink FDCM Mod 23 50 Amp Red Rad Fan 24 Mini Relay Rad Fan Lo Rly 25 Micro Relay Ft Fog Lamps Rly 26 Micro Relay Adjustable Pedal Rly 27 15 Amp Blue IOD #1 28 20 Amp Y ellow IOD #2 (Audio) 29 10 Amp Red ORC (Ign R/.S) 30 10 Amp Red ORC (Ign [...]

REPLACEMENT BULBS Interior Lights Bulb T ype Glove Box Light ......................... 1 9 4 Grab Handle Light ................ L002825W5W Overhead Console Reading Lights .......... VT4976 Rear Cargo Light ....................... 214–2 V isor V anity Light ..................... V26377 Underpanel Courtesy Lights ................. 9 0 6 Instrument [...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 20.6 Gallons 78 Liters Engine Oil with Filter 3.7 Liter Engine (5W -30, API Certified) 5 Qts 4.7 Liters 4.7 Liter Engine (5W -30, API Certified) 6 Qts 5.7 Liters 5.7 Liter Engine (5W -20, API Certified) 7 Qts 6.6 Liters Cooling System * 3.7 Liter Engine (Mopar 威 Engine Coolant/Antifreeze 5 Y ear/ 1[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) Engine Oil (3.7L/4.7L Engines) Use API Certified SAE 5W -30 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid T ransfer Case (3.7L Engines) Mopar 威 A TF+4 Automatic T ransmission Fluid T ransfer Case (4.7L/5.7L Engines) Mopar 威 NV 247 T ransfer Case Lubricant Axle Differ ential (Front-Rear) Mopar 威 Synthetic Gear & Axle Lubri[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 3 9 2 䡵 Maintenance Schedules ................... 3 9 2 ▫ Schedule “B” ........................ 3 9 5 ▫ Schedule “A” ........................ 4 0 5 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y :[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliabi[...]

• T axi, police, or delivery service (commercial service) • Off-r oad or desert driving • If equipped for and operated with E-85 (ethanol) fuel. NOTE: Most vehicles are operated under the conditions listed for Schedule “B.” NOTE: If ANY of these apply to you, change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes[...]

• Check the windshield washer solvent, add as r equired. Once a Month • Check the tire pressure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of the coolant reservoir , brake master cylinder , and transmission, and add as needed. • Check all lights and[...]

Schedule “B” Follow this schedule if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures are below 32°F (0°C) • Stop and go driving • Excessive engine idling • Driving in dusty conditions • Short trips of less than 10 miles (16.2 km) • More than 50% of your driving is at sust[...]

Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage. XX Inspect the engine air cleaner filter , replace if nec- essary . X Drain and refill the [...]

Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage. XX X Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the P[...]

Miles 33,000 36,000 39,000 42,000 45,000 (Kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage. XX Inspect the engine air cleaner filter , replace if nec- essary . X Drain and refill [...]

Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage. XX X Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the [...]

Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (1 10 000) (115 000) (120 000) (125 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage. XX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the[...]

Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers) (130 000) (135 000) (140 000) (145 000) (150 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage. XX X Inspect the engine air cleaner filter , replace if nec- essary . X Inspect [...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage. XX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect th[...]

Miles 108,000 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage. XX X Inspect the engine air cleaner filter , replace if nec- essary . X [...]

Miles 108,000 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Flush and replace the engine coolant/anti-freeze at 120 months, if not replaced at 102,000 miles (170 000 km). X Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all re- ceipts. 〫 Th[...]

Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change the engine oil and engine oil filter . X X X X X Rotate the tires. X X X X X Check spare tire for proper pressur e and correct stowage. X X XXX Inspect the engine air cleaner filter , and replace[...]

Miles 36,000 42,000 48,000 54, 000 (Kilometers) (60 000) (70 000) (80 000) (90 000) [Months] [36] [42] [48] [54] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Check spare tire for proper pressur e and correct stowage. X X X X Inspect the brake linings. X X 406 SCHEDULE “A” 8 M A I N T E N A N C E S C H E D U L [...]

Miles 60,000 66,000 72,000 78,000 (Kilometers) (100 000) (1 10 000) (120 000) (130 000) [Months] [60] [66] [72] [78] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Check spare tire for proper pressur e and correct stowage. X X X X Inspect the engine air cleaner filter , and replace if nec- essary . X Inspect the PCV[...]

Miles 84,000 90,000 96,000 102, 000 (Kilometers) (140 000) (150 000) (160 000) (170 000) [Months] [84] [90] [96] [102] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Check spare tire for proper pressur e and correct stowage. X X X X Inspect the engine air cleaner filter , and replace if nec- essary . X Inspect the P[...]

Miles 108,000 1 14,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [1 14] [120] Change the engine oil and engine oil filter . X X X Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage. X X X Inspect the engine air cleaner filter , and replace if necessary . X Inspect the PCV V alve, replace if nec[...]

* This maintenance is not requir ed if the belt was previously replaced. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. 410 SCHEDULE “A” 8 M A[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V e h i c l e .............................. 4 1 2 ▫ Prepar e For The Appointment ............ 4 1 2 ▫ Prepar e A List ........................ 4 1 2 ▫ Be Reasonable W ith Requests ............. 4 1 2 䡵 If Y ou Need Assistance ................... 4 1 2[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner . This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealers[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the U[...]

W ARRANTY INFORMA TION (U.S. V ehicles Only) See the W arranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer . They will help you keep your vehicle operating at its best. REPORTING SA[...]

PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals. (No P .O. Boxes). • Se[...]

Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .daimlerchrysler .com • www .daimlerchrysler .ca/manuals DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the Nationa[...]

on specified government test surfaces of asphalt and concrete. A tir e marked C may have poor traction perfor- mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature [...]

INDEX 10 I n f o r m a t i o n P r o v i d e d b y :[...]

ABS (Anti-Lock Brake System) ............ 179,271 Adding W asher Fluid ..................... 1 6 9 Adjustable Pedals ....................... 1 4 7 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 358 Air Conditioner Maintenance ............... 3 6 0 Air Conditioning ........................ 2 3 2 Air Conditioning, Operating T ips ............[...]

Autostick ............................. 2 5 8 Auxiliary Electrical Outlet (Power Outlet) ...... 1 6 2 Auxiliary Power Outlet ................... 1 6 2 Battery ............................... 3 5 9 Emergency Starting ..................... 3 3 8 Keyless T ransmitter Replacement (RKE) ....... 2 4 Saving Feature (Protection) ............... 1 2 2 B e l[...]

Chains, T ire ............................ 3 0 3 Changing A Flat T ire ..................... 3 3 2 Chart, T ire Sizing ........................ 2 8 2 Checks, Safety ......................... 7 0 , 7 1 Child Restraint .................... 5 8 , 5 9 , 6 4 , 6 6 Child Restraint T ether Anchors ............. 6 3 , 6 4 Child Safety Locks ...............[...]

Defroster , Rear W indow ................... 2 3 3 Defroster , W indshield ................ 7 1 , 234,241 Diagnostic System, Onboard ................ 3 4 8 Dimmer Switch, Headlight ................. 1 2 6 Dipsticks Automatic T ransmission ................. 3 7 3 Oil (Engine) .......................... 3 5 2 Power Steering ........................ 3[...]

Block Heater ......................... 2 5 5 Break-In Recommendations ................ 6 8 Compartment ......................... 3 4 6 C o o l i n g ............................. 3 6 5 Exhaust Gas Caution .................. 6 9 , 3 0 8 Fails to Start .......................... 2 5 4 Flooded, Starting ...................... 2 5 4 Fuel Requirements .[...]

Fluid Leaks ............................. 7 1 Fluid Level Checks Automatic T ransmission ............... 372,373 Engine Oil ........................... 3 5 2 Power Steering ........................ 3 6 1 Fluids, Lubricants and Genuine Parts .......... 3 8 9 Fog Lights .......................... 126,185 Fold and T umble Rear Seat ................. 1[...]

Gear Ranges ........................... 2 5 7 General Information .................... 2 4 , 3 0 3 Glass Cleaning .......................... 3 8 0 Gross Axle W eight Rating .................. 3 1 3 Gross V ehicle W eight Rating ................ 3 1 2 Hands-Free Phone (UConnect™) .............. 8 2 Hazard W arning Flasher ................... 3 3 0[...]

Interior Lighting ........................ 1 2 0 Interior Lights ....................... 120,125 Intermittent W ipers (Delay W ipers) ........... 1 2 8 Introduction ............................. 4 Jack Location ........................... 3 3 2 Jack Operation ....................... 332,335 Jacking Instructions ...................... 3 3 5 Jump Sta[...]

Dimmer Switch, Headlight ............. 122,126 Electronic Stability Program (ESP) Indicator ........................ 140,180,183 Electronic Throttle Control W arning ......... 1 8 4 F o g ............................. 126,185 Four-Wheel Drive Indicator ............... 1 8 3 Fuses ............................... 3 8 1 Hazard W arning Flasher .......[...]

Liftgate, T ailgate ........................ 1 8 Power Door ........................... 2 0 Lower Anchors and T ether for CHildren (LA TCH) ............................ 6 3 , 6 4 Lubrication, Body ....................... 3 6 3 Luggage Rack (Roof Rack) ................. 1 6 9 Lumbar Support ........................ 1 0 6 Maintenance Free Battery ...[...]

Occupant Classification System (OCS) .......... 4 8 Occupant Restraints ....................... 3 2 Octane Rating, Gasoline (Fuel) .............. 3 0 5 Odometer .......................... 183,184 T r i p ................................ 1 8 3 Off-Pavement Driving (Off-Road) .......... 276,376 Off-Road Driving (Off-Pavement) .......... 276,376 Oil, [...]

P o l i s h i n g a n d W a x i n g ..................... 3 7 8 Power Distribution Center ..................... 3 8 3 Door Locks ........................... 2 0 M i r r o r s .............................. 8 1 Outlet (Auxiliary Electrical Outlet) .......... 1 6 2 Seats ............................... 1 0 8 Steering .......................... 274,36[...]

Recorder , Event Data ...................... 5 6 Recreational T owing ...................... 3 2 3 Shifting into T ransfer Case Neutral (N) ....... 3 2 4 Shifting out of T ransfer Case Neutral (N) ..... 3 2 6 Reformulated Gasoline .................... 3 0 6 Refrigerant ............................ 3 6 1 Reminder , Lights On ..................... 1 [...]

Reminder ............................ 1 8 3 Shoulder Belt Anchorage .................. 3 7 Seats ................................. 1 0 5 Adjustment .......................... 1 0 5 Cleaning ............................ 3 7 9 Easy Entry ........................... 1 1 8 Fold and T umble Rear ................... 1 0 9 Head Restraints ................[...]

O i l ................................ 3 5 3 Speed Control (Cruise Control) .............. 1 4 8 Speedometer ........................... 1 7 8 Starting ............................... 2 5 3 Automatic T ransmission ................. 2 5 3 Cold W eather ...................... 254,255 Emergency (Jump Starting) ............... 3 3 8 Engine Block Heater[...]

Inflation Pressur es ..................... 2 9 0 Jacking ............................. 3 3 2 L i f e o f T i r e s .......................... 2 9 4 Load Capacity ..................... 285,286 Pressur e Monitor System (TPMS) ........... 2 9 7 Pressur e W arning Light .................. 1 8 1 Quality Grading ....................... 4 1 7 Radial .....[...]

T ransmission Automatic ........................ 256,372 Maintenance .......................... 3 7 2 Range Indicator ....................... 1 8 4 S h i f t i n g ............................. 2 5 6 T ransmitter Battery Service (Remote Keyless Entry) . 24 T ransmitter , Garage Door Opener (HomeLink 威 ) . . 152 T ransmitter , Remote Keyless Entry[...]

W indows Power ............................... 2 9 W indshield Defroster ................ 7 1 , 234,241 W indshield W ashers ...................... 1 2 7 F l u i d ............................... 3 6 3 W indshield W iper Blades .................. 3 6 3 W indshield W ipers ....................... 1 2 7 W ipers, Intermittent ...................... 1 [...]

438 INDEX I n f o r m a t i o n P r o v i d e d b y :[...]

NOTES I n f o r m a t i o n P r o v i d e d b y :[...]

NOTES I n f o r m a t i o n P r o v i d e d b y :[...]