JVC AV 20FA44 manuel d'utilisation

Color T elevision Users Guide For Model: A V -20F A44 Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the car[...]

Important Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: T o reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the pres[...]

• As an “ENERGY ST AR ® ” partner , JVC has determined that this product or product model meets the “ENERGY ST AR ® ” guidelines for energy efficiency . Important Safeguards CAUTION: Please read and retain for your safety . Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure yo[...]

7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. E[...]

13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stop[...]

T able of Contents Unpacking your TV . . . . . . . . . . . . 7 TV Model . . . . . . . . . . . . . . . . 8 TV Remote Control . . . . . . . . . . . 9 Getting Started . . . . . . . . . . . . . 10 The Remote Control . . . . . . . . . . 10 Connecting Y our Devices . . . . . . . 1 1 Interactive Plug In Menu . . . . . . . . 15 Setting CA TV , VCR and DVD [...]

T wo AA Batteries 1 T elevision 1 Remote Control AA Alkaline AA Alkaline We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features. If you’re anxious to start using your television right away , a quick setup guide follows on the next few pag[...]

Quick Setup TV Model NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. 8 Rear Panel Diagram MODEL : A V -20F A44 INPUT 3 MEN[...]

9 • For information on remote control buttons, see pages 39 - 45. MODEL: A V -20F A44 Quick Setup TV Remote Control RM-C1251G POWER DISPLAY SLEEP TIMER LIGHT INPUT THEATER PRO VIDEO STATUS 1 7 4 100+ 3 9 6 RETURN+ MUTING MENU C.C. EXIT 2 8 0 5 CH + VOL – VOL + REC OPEN/CLOSE STILL/PAUSE STOP PAUSE PLAY FF REW TV CATV VCR DVD VCR CHANNEL PREV NE[...]

These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Before you can operate your remote control, you first need to install the batt[...]

Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV . Step 2 – Connecting Y our Devices 11 [...]

12 Notes: • If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’ s LEFT AUDIO INPUT . • Use the S-Video connection if possible for superior picture quality . • Y our VCR must be turned on to view premium cable channels. Note: • If you do not have a cable box, connect the cable wire from the wall ou[...]

Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other t[...]

1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the front of the TV . 2) Connect a white composite cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the front of the TV . 3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT , into the RIGHT AUDIO IN on the front of the TV . No[...]

When you turn your television on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear . • Setting the TV’s clock to the correct time so your timer functions will work properly .[...]

T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. √ ® T o choose MANUAL † T o TIME √ ® T o set the hour † T o minute √ ® T o set the minute † T o ST ART CLOCK Manual Clock Set Note: • Y ou will have to reset the clock after a power interruption. Y ou must set th[...]

17 In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear , active channels. √ ® T o choose CABLE or AIR (or SKIP when you skip Auto T uner Setup) [...]

Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below . If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer . ABC Archer Cableview Citizen Curtis Diamond Eagle E[...]

Admiral Aiwa Akai Audio Dynamic Bell & Howell Broksonic Canon CCE Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai G.E. Go Video Goldstar Hitachi Gradiente Instant Replay Jensen 035 027, 032, 095 029, 072, 073, 074 003, 005 063, 071 020, 026, 094 023, 025 043 064 063, 029, 064 045, 024, 027, 093 043, 059, 024, 092 003, 004, [...]

Aiwa Apex Denon Hitachi JVC Kenwood Konka Mitsubishi Onkyo Oritron Panasonic Philips Pioneer 043 040 020, 037 030, 031 000 035 039 025 041 044 020 023, 036 022 DVD Player CODES Raite RCA Sampo Samsung Sharp Silvania Sony T echnics T oshiba W ave Y amaha Zenith 033 021, 026 034 030 028 038 024, 045, 046, 047 020 023 042 020 027, 032 DVD Player CODES[...]

Remote Programming 21 Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press and hold down the P OWER button, then press the R ETURN + button for more than three seconds. 3) Release the R ETURN + button, then release the P OWER button. 4) Press the P OWER button on the remote, and see i[...]

T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in yellow is the one currently selected. If you press the M ENU button again, the onscreen display will skip to the next menu screen. If you use the Menu button on the TV’ s front panel instead of the remote, an additional menu screen showing inpu[...]

Press the M ENU button Onscreen Menus 23 INITIAL SETUP 01 PICTURE ADJUST 01 PICTURE ADJUST 02 SOUND ADJUST CLOCK/TIMERS INITIAL SETUP 02 INITIAL SETUP PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY V–CHIP SET LOCK CODE NEXT P AGE SELECT BY OPERA TE BY EXIT BY EXIT PICTURE ADJUST PREVIOUS TINT COLOR PICTURE BRIGHT DET AIL COLOR TEMPERA TURE NEXT P AGE [...]

Initial Setup 24 Auto T uner Setup The auto tuner setup function is described on page 17 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below . Press the M ENU button π † T o AUTO TUNER SETUP √ ® T o operate √ ® T o choose CABLE or AIR † T o move to ST ART √ ® T o start Auto T uner Set[...]

Initial Setup 25 Channel Guard Message Y ou can customize the V -Chip settings of your television to match your personal tastes. The V -Chip menu below is the starting point for your V -Chip settings Y ou can use US V -Chip settings (for programming broadcast from the United States), Canadian V -Chip settings (for programming broadcast from Canada)[...]

Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ ® T o VIEW or BLOCK Press E XIT when done Directions to Block Unrated Programs Initial Setup Unrated Programs Unrated programming refers to any programm[...]

U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children.  TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.  TV Y7 is for Older Children Most parents would find such programs suitable for children 7 and a[...]

28 Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π or † to move the cursor to the correct location. Press √ or ® to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”. For example. T o block viewing of all TV 14 shows, move the cursor to t[...]

Initial Setup  NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including childr[...]

Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® T o enter ratings menu For example: T o block viewing of programming rated 14+ and 18+: π † T o the 18+ Column √ ® T o turn on the lock π † T o the 14+ Column[...]

Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below . Press the M ENU button π † T o SET LOCK CODE √ ® T o operate (lock icon appears) Press Z ERO to access [...]

The language function is described on page 15 as the interactive plug-in menu. If you need to choose the language again, follow the steps below . Press the M ENU button π † T o LANGUAGE √ ® T o choose a language: ENG. (English), FRAN. (French) or ESP . (Spanish) Press the E XIT button when finished Language Many broadcasts now include an onsc[...]

Initial Setup 33 This allows you to lock the keys on the front of the TV , so that a child may not accidentally change your viewing preferences. Press the M ENU button π † T o FRONT P ANEL LOCK √ ® T o turn ON or OFF Press the E XIT button when finished Front Panel Lock Y ou can turn off this feature in the following ways: • Unplug the powe[...]

Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT or DET AIL √ ® T o enter √ ® T o adjust the setting π † T o move to the next setting Press the E XIT button when finished Note: • If you press the 0 button, you can reset the setting to the factory default setting. These settings allow you to change and adjust the way the pi[...]

This feature inserts a blank blue screen over channels which are not broadcasting or are too weak to be received clearly . Press the M ENU button π † T o NOISE MUTING √ ® T o turn noise muting ON or OFF Press the E XIT button when finished Note: • Noise muting will not work during auto tuner setup or when you operate channel summary . Noise[...]

MTS technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP) . Press the M ENU button π † T o MTS √ ® Select the mode (The ON AIR arrow tells you if a broadcast is in stere[...]

Clock/T imers 37 Set Clock The set clock function is described on page 16 as the interactive plug-in menu. Y ou can choose to set the clock automatically , or manually . If you need to set the clock again, follow the steps below . Press the M ENU button π † T o SET CLOCK √ ® T o operate When you set the clock automatically , choose AUTO by pr[...]

The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. Press the M ENU button π † T o ON/OFF TIMER √ ® T o operate (begins with ON TIME) √ ® T o set the hour (AM/PM) you want the TV to turn on † T o[...]

T urns the TV on or of f. Press the P OWER button Power Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7: 0 (Zero) 7 (Seven) Number Buttons - 10Key Pad Use the 100+ button to directly access channels above channel 99. For example, to move to channel 124, press 100+, 2 (T wo), 4 ([...]

Button Functions 40 The R ETURN + button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons. R ETURN + and hold for three seconds The channel currently active has been prog[...]

The display screen shows the current status of timers, inputs, and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current channel or A V input (Channel 07) • The current time (12:20 pm) • Sleep timer status/minutes remaining (The Sleep T imer is off) • On/off timer status (Set to turn on ev[...]

Button Functions 42 The S OUND button give you a choice of two sound effects. A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more effect. BBE - BBE high definition audio adds natural, clear and extraordinary sound quality to any program. Press the S OUND button π † T o select A.H.S. or BBE √ ® T o choose [...]

Button Functions 43 The TheaterPro D6500K color temperature technology function makes sure that the video you watch is set to the standard color temperature, so that what you see is as true to what the film to video editors intended it to be. Press the T HEA TER P RO button TheaterPro D6500K Aspect The V IDEO S T ATUS button gives you a choice of f[...]

Y ou can also use this remote control to operate the basic functions of your DVD player . These functions include: play , rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off. Move the selector switch to DVD to operate. • The remote is preset with the code 000 to control JVC-brand DVD players. For any o[...]

T roubleshooting 45 There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor The On T imer is blinking There are lines across the picture The picture is spotted There are double pictures (ghosts) Picture is snowy (image noise) Screen is 80% black S[...]

JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown below (the “W arranty Period”) (PICTURE TUBE is covered for T wo (2) years.) THIS LIMITED W[...]

7) Accessories; 8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of purchase.) There are no express warranties except as listed above. THE DURA TION OF ANY IMPLIED W ARRANTIES, INCLUDING THE IMPLIED W ARRANTY OF MERCHANT ABIL TY , IS LIMITED TO THE DURA TION OF THE EXPRESS W ARRANTY HEREIN. JVC SHALL NOT BE LIABLE [...]

QUALITY SERVICE TOLL FREE: 1 (800) 537-5722 http://www .jvc.com HOW TO LOCA TE YOUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repairs are necessary , please call 1 (800) 537-5722 for your nearest authorized servic[...]

Specifications MODEL Reception Format Reception Range Power Consumption Screen Size Audio Output Speakers Antenna T erminal External Input Jacks Audio Output Jacks (FIX) Dimensions (In) WxHxD (cm) Weight (lbs / kg) Accessories NTSC, BTSC System (Multi-Channel Sound) VHF 2 to 13, UHF 14 to 69 Sub Mid, Mid, Super , Hyper and Ultra bands (181 channel [...]

Notes 50 AV-20FA44 English 50 8/19/03, 9:37:45 AM[...]

Notes 51 AV-20FA44 English 51 8/19/03, 9:37:45 AM[...]

JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 AV-20FA44 English 52 8/19/03, 9:37:45 AM[...]