JVC LPT0002-027B manuel d'utilisation

H R-DD949E/EH VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0002-027B SEE  AUTO SET UP ON REAR SIDE SEE  AUTO SET UP ON REAR SIDE S C E N E F I N D E R P R O G C H E C K T V V O L . C.MEMORY DISPLAY DAILY AUX ADD TIME C.RESET CANCEL DATE STOP START AUDIO MONITOR (MONITOR) TV/VCR TV SAT VCR TIMER WEEKLY A 12 45 3 6 8 0 7 9 B PUSH JOG MULTI BRA[...]

2 EN SAFETY FIRST Failure to heed the following precautions may result in damage to the recorder , remote control or video cassette. 1. DO NOT place the recorder . . . ... in an environment prone to extreme temperatures or humidity . ... in direct sunlight. ... in a dusty environment. ... in an environment where strong magnetic fields are generated[...]

EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 57). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have. RF CONNECTION ● T o Connect T o A TV With NO A [...]

4 EN INITIAL SETTINGS When the button on the recorder/remote control is pressed for the first time to power on the recorder after you plug the mains power cord into a mains outlet, the Country Set display will appear on the TV screen and the recorder's front display panel. By simply selecting your country*, the Auto Set Up function sets the tu[...]

EN 5 If you are referring to the on-screen display Press PUSH JOG % fi to move the highlight bar (pointer) to your country's name. ● If you have selected a country other than BELGIUM or SUISSE, go to step 4 . ● If you have selected BELGIUM or SUISSE, go to step 3 . SELECT LANGUAGE 3 Press OK . the Language Set display appears on the front[...]

6 EN INITIAL SETTINGS (cont.) If both auto channel set and auto clock set have been performed successfully: 1 Perform "V ideo Channel Set" on page 8. 2 T urn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG. button(s). ● If s[...]

EN 7 Language This recorder offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically ( Z pg. 6), you can change the language setting manually using this procedure as required. TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU 2 Press MENU twice. ACCESS COUNTR Y SET SCREEN 3 Pres[...]

8 EN V ideo Channel Set INITIAL SETTINGS (cont.) V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. 5 / 8 ¡ 1 8 q 6 12 45 3 6 8 0 7 9 2 4 1 3 OK If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go t[...]

EN 9 IMPORT ANT : Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder . ACCESS VIDEO CHANNEL SET MODE 1 Hold down STOP on the recorder until the display panel shows the following. SET VIDEO CHANNEL 2 Press TV PROG. – until the display panel shows " – OUT – ?[...]

10 EN INITIAL SETTINGS (cont.) S HOW V IEW Setup W ith S HOW V IEW , timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise. NOTE: “Guide Program (GUIDE PROG) Number” refers to the assigned TV station numbers, according to broadcast area, for S HOW V IEW timer r[...]

EN 11 ENTER SHOWVIEW NUMBER 4 Press OK , and a cursor appears above “GUIDE PROG”. Then, using the NUMBER keys, input the S HOW V IEW number (found in most TV listings) of a program scheduled to be broadcast on each station on the list from step 1 , starting at the top. If you enter the wrong number, press CANCEL to backspace and input the corre[...]

12 EN PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Usable cassettes LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the[...]

EN 13 Playback Features High-Speed (T urbo) Sear ch ACTIV A TE HIGH-SPEED SEARCH 1 During playback or still picture, press FF for forward high-speed search, or REW for reverse high-speed search. T o resume normal playback, press PLA Y . NOTES: ● For short searches, press and hold FF or REW for over 2 seconds. When released, normal playback resume[...]

14 EN Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG . buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press SP/LP ( ) on the remote to engage manual tracking. ADJUST TRACKING MANUALL Y 2 Press TV PROG . + or – to adjust tra[...]

EN 15 NTSC Playback Y our video recorder is equipped with NTSC circuitry that can play back NTSC tapes. LOAD A CASSETTE 1 Insert a cassette recorded in NTSC. ST AR T PLA YBACK 2 Press PLAY . ● "NTSC" appears on the screen for about 5 seconds. ● Some TVs shrink the picture vertically and place black bars at the top and bottom of the sc[...]

16 EN PLA YBACK (cont.) Spatializer W Soundtrack Selection Y our video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select. During Playback Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows: TRACK Recorder's Front Panel On-Screen Dis[...]

EN 17 ACTIV A TE SCENE FINDER 1 Press SCENE FINDER . The recorder starts forward search for 5 seconds and then fast-forwards 10 minutes on the counter. This cycle is repeated until the end of the tape is reached. ● T o start Scene Finder in the reverse direction, press SCENE FINDER and then press the REW button within 2 seconds. This cycle is rep[...]

18 EN PLA YBACK (cont.) TimeScan Y our recorder is equipped with the TimeScan function. T imeScan allows noise free pictures to be displayed on your TV screen in the forward and reverse search modes. Audio will be played back at normal speed during any of the T imeScan modes ( Z pg. 19). T imeScan allows you to view a program in search mode while l[...]

EN 19 Names of special-ef fects playback Reverse Forward Search Play Slow-Motion *Still Slow-Motion Play Search -9x -7x -5x -3x -1x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 3x 5x 7x 9x -7x -3x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 5x 9x Audio is output. Audio is not Audio is Audio is not Audio is output. output. output. output. T imeScan Speed LP Speed SP Audio o[...]

20 EN TimeScan Audio The audio output can be set ON/OFF during T imeScan. Select ON/OFF as required. * The default setting is "ON". ACCESS MAIN MENU SCREEN 1 Press MENU twice. ACCESS MODE SET SCREEN 2 Move the highlight bar (pointer) to "MODE SET" by pressing PUSH JOG % fi , then press OK . SELECT MODE 3 Move the highlight (poi[...]

EN 21 TV signals being received by the recorder ’ s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording 12 45 3 6 8 0 7 9 2 4 1 3 5 / 8 ¡ 1 8 q 6 TV PROG. PAUSE NUMBER STOP PLAY T urn on the TV and select the VIDEO channel (or A V mode). LOAD A CASSETTE 1 I[...]

22 EN B.E.S.T . Pictur e System The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”. Recording LOAD A CASSETTE 1 Insert a [...]

EN 23 12 45 3 6 8 0 7 9 2 4 1 3 5 / 8 ¡ 1 8 q 6 PAUSE RECORD NOTES: ● The B.E.S.T . system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording. ● In the case of timer recording, the B.E.S.T . system works before recording is initiated. ● Once the cassett[...]

24 EN On-Screen Displays Y ou can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF . Messages appear in the selected language ( Z pg. 6 or 7). T urn on the TV and select the VIDEO channel (or A V mode). RECORDING (cont.) TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press M[...]

EN 25 Recording Features Record One Pr ogramme While W atching Another If your recorder is connected to the TV via A V connection, . . . . . . press TV/VCR . The recorder's VCR indicator and the TV broadcast being recorded disappear . SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls o[...]

26 EN Receiving Stereo And Bilin- gual Programmes Y our recorder is equipped with a Sound-Multiplex decoder (A2) and, if you own the HR-DD949 EH, a Digital stereo sound decoder (NICAM) as well, making reception of stereo and bilingual broad- casts possible. When the channel is changed, the type of broadcast being received will be displayed on the T[...]

EN 27 Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished. 5 / 8 ¡ 1 8 q 6 ST AR T RECORDING 1 Press RECORD on the recorder . ENGAGE ITR MODE 2 Press RECORD again. " " blinks and 0:30 appears on the front d[...]

28 EN TIMER RECORDING S HOW V IEW Timer Recording During S HOW V IEW and regular timer programming, the Illumi- Guide feature tells you which button on the remote control must be pressed next by lighting it up. T o use this feature, with the TV/SA T ./VCR switch set to "VCR", press ILLUMI GUIDE before performing step 1 . ( PROG. , REW , P[...]

EN 29 ACCESS SHOWVIEW PROGRAM SCREEN 3 Press OK , and the S HOW V IEW Program screen appears (if you’re just starting out, “P1” appears). The display panel shows the programme start time. Pressing PROG. CHECK changes the display to the programme stop time, then the date and channel position. IMPORT ANT Be sure to confirm the setting of PDC/VP[...]

30 EN TIMER RECORDING(cont.) Regular Timer Pr ogramming Remember , the clock must be set before you can programme the timer ( Z pg. 49). If you don’ t know the S HOW V IEW number for the programme you wish to record, use the following procedure to set your recorder to timer -record the programme. Or you can use the Illumi-Guide feature, where the[...]

EN 31 ENTER PROGRAMME DA TE 5 Press DA TE +/– . (The current date appears on screen. The date you enter appears in its place.) ● If you are using the Illumi-Guide feature, the following buttons remain lit: ST ART +/– , STOP +/– , DA TE +/– , TV PROG. +/– and MENU . ENTER CHANNEL POSITION 6 Press TV PROG. +/– . IMPORT ANT Be sure to co[...]

32 EN 12 45 3 6 8 0 7 9 2 4 1 3 OK CANCEL START+/– TV PROG. DATE+/– STOP+/– Auto Timer When the Auto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on. ACCESS MAIN MENU SCREEN 1 Press MENU twice. ACCESS MODE SET SCREEN 2 Press PUSH J[...]

EN 33 Auto SP/LP Timer If, when recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording. ENGAGE AUTO SP/LP TIMER 1 Press AUTO SP/LP TIMER on the recorder front panel. The button lights up. For Example . . . Recording a program of 210 minutes in length [...]

34 EN EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source player or the recording deck. MAKE CONNECTIONS 1 Connect the player’s 21-pin SCAR T (A V) connector to the recorder’ s 21-pin SCAR T (AV) connector as illustrated on page 35. When Using Y our V ideo Recorder As The Sour ce Player . . . . . . c[...]

EN 35 Another recorder RF Cable (provided) Another recorder Recorder 21-pin SCAR T Cable (not provided) Player Y our recorder Recorder Y our recorder TV Receiver TV Receiver RF Cable (provided) 21-pin SCAR T Cable (not provided) Player VIDEO CHAN- NEL or A V mode VIDEO CHAN- NEL or AV mode Another recorder RF Cable (provided) Another recorder Recor[...]

36 EN Y ou can use a camcorder as the source player and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder ’ s front panel AUDIO/VIDEO input connectors. ● When using a monaural camcorder , connect its AUDIO OUT connector to the AUDIO IN L input con[...]

EN 37 5 / 8 ¡ 1 8 q 6 5 / 8 ¡ 1 8 q 6 Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Audio Dubbing Original sound AUDIO OUT Audio mixer MAKE CONNECTIONS 1 Connect an audio component to the AUDIO IN L + R connectors on the recorder's front panel. ● When connecting monaural equipment, use o[...]

38 EN 5 / 8 ¡ 1 8 q 6 Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously . Use your video recorder as the[...]

EN 39 ENGAGE INSER T EDITING 6 Press INSERT . ● Y our recorder enters the Insert-Pause mode. (" ", " " and " " light up on the front display panel.) ● The TV screen changes from the still picture to the input source you are going to record. ST AR T EDITING 7 Load the source cassette and play back the segment that i[...]

40 EN INFORMA TION ON J TERMINAL J T erminal (JLIP(Joint Level Interface Protocol) Connector) The J T erminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations. Examples: ● Enables Random Assemble Editing of up to 99 segments with the [...]

EN 41 The A V2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels. SELECT INPUT MODE 1 Set "A V2 SELECT " to "DECODER". ( Z pg. 34) CONNECT DECODER 2 Connect your recorder&a[...]

42 EN TV Multi- Brand Remote Contr ol SPECIAL FEA TURES Y our remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer ’ s TVs can also be controlled by setting the appropriate switch on the remote control. Before you start . . . ● T urn on the TV using its remote control. ● Set the remote cont[...]

EN 43 Y our remote control can operate the basic functions of your satellite tuner set. In addition to JVC satellite tuner s, other manufacturer’ s satellite tuners can also be controlled by setting the appropriate switch on the remote control. Before you start . . . ● T urn on the satellite tuner using its remote control. ● Set the remote co[...]

44 EN T urn on the TV and select the VIDEO channel (or A V mode). IMPORT ANT Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function ( Z pg. 4) or if you have moved to a different area or if a new station starts broadcasting in your area. TUNER SET Y our recorder needs to memorise all necessary statio[...]

EN 45 12 45 3 6 8 0 7 9 2 4 1 3 OK PUSH JOG AUTO SET PLEASE W AIT [MENU] : EXIT 0 + ++ PERFORM AUTO CHANNEL SET 5 Press PUSH JOG % fi to move the highlight bar (pointer) to the language of your choice , then press OK to initiate Auto Channel Set. ● The Auto Set screen appears, and remains on screen while the recorder searches for receivable stat[...]

46 EN Storing Channels Manually Store channels that were not stored during Auto Set Up ( Z pg. 4) or Auto Channel Set ( Z pg. 44). * In Australia and New Zealand, channels cannot be stored properly even though the following procedure is performed. TUNER SET (cont.) Change Station Channel Position SELECT ITEM 1 Press PUSH JOG % fi until the item yo[...]

EN 47 Fine-T uning Channels Already Stored Perform steps 1 and 2 of "Storing Channels Manually" on page 46 to access the Confirmation screen before continuing. Set Stations (A) SELECT ITEM 1 Press PUSH JOG %fi until the item you want begins blinking. Then press OK twice and the station’ s name (ID) begins blinking. SELECT NEW ST A TION[...]

48 EN TUNER SET (cont.) TV Station And ID List ID* ST ATION NAME 1000 TV1000 3SA T 3SAT ADL T ADUL T ANT3 ANTENA3 ARD ARD ARTE AR TE BBC BBC GROUP BBC1 BBC1 BBC2 BBC2 BR3 BA YERN3 C+ CANAL PLUS C1 PORTUGUSES CAN5 CANALE5 CH4 CHANNEL4 CH5 CHANNEL5 CHLD CHILD CINE CINEMA CLUB TELECLUB CMT CMT CNN CNN CSUR ANDALUCIA DISC DISCOVERY DR DR TV DRS DRS DSF[...]

EN 49 T urn on the TV and select the VIDEO channel (or A V mode). CLOCK SET 12 45 3 6 8 0 7 9 2 4 1 3 PUSH JOG OK IMPORT ANT Perform the following steps only if auto clock set has not been set correctly by Auto Set Up function ( Z pg. 4) or Auto Channel Set ( Z pg. 44) or if the recorder's memory backup has expired. MENU If you performed Auto [...]

50 EN CLOCK SET (cont.) SET CLOCK AUTOMA TICALL Y 4 At the Clock Set screen, press PUSH JOG . The Auto Clock screen appears and clock setting begins. ● If "TV PR." isn't set to the channel position on which Auto Clock data is received, "ERROR" appears, and then the screen from step 3 reappears. T o set "TV PR.",[...]

EN 51 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected. ● “ ‰ “ is displayed on the disp[...]

52 EN Confirm that the camcorder is properly connected. Set the input mode to “AU”. ● The camcorder has not been properly connected. ● The input mode is not correct. 4. Camcorder recording is not possible. TROUBLESHOOTING (cont.) TIMER RECORDING CORRECTIVE ACTION Re-perform the clock and/or timer settings. Press TIMER and confirm that “ ?[...]

EN 53 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. When returning from multi-speed search to no[...]

54 EN INDEX FRONT VIEW S L O W S L O W 5 / 8 ¡ 1 q 6 VIDEO TIMER (MONO) L–AUDIO–R TV PROG 3R PICTURE AUTO SP/LP TIMER SP/LP TV PROG/ JOG SHUTTLE A. DUB SPATIALIZER INSERT 8 REW FF +8 4 0 6 10 –20dB NORM L R M VCR SP LP EP REMAIN REVIEW 3 4 6 2 5 7 0 9 8 1 ! @ ^ & # $ % * ( ) q w Open the lid to access covered connectors and buttons. 1[...]

EN 55 REAR VIEW 5 AUDIO OUT (L/R) Connectors Z pg. 3 6 A V2 IN/DECODER Connector Z pg. 34, 41 7 Remote PAUSE Connector Z pg. 36 8 RF OUT Connector Z pg. 3 1 Mains Power Cord Z pg. 3 2 A V1 IN/OUT Connector Z pg. 3, 34 3 J T erminal [JLIP (Joint Level Interface Protocol) Connector] Z pg. 40 4 ANT . IN Connector Z pg. 3 AV1 IN/OUT AV2 IN/DECODER RF O[...]

56 EN REMOTE CONTROL INDEX (cont.) Buttons with a small dot on the left side of the name can also be used to operate your TV with the TV/ SA T ./VCR switch set to "TV". Z pg. 42 1 REVIEW Button Z pg. 15 2 A/B Code Switch Z pg. 17 3 C. MEMOR Y Button Z pg. 17 4 NUMBER Keys Z pg. 21, 28 5 (PDC/VPS) Button Z pg. 29, 31 6 CANCEL Button Z pg. [...]

EN 57 SPECIFICA TIONS GENERAL Power requirement : AC 220 – 240 V ` , 50/60 Hz Power consumption : 24 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 430 x 94 x 348 mm W eight : 4.5 kg Format : VHS P AL standard Maximum recording time (SP) : 240 min. with E-240 video ca[...]

MEMO[...]

MEMO[...]

HR-DD949E/EH COPYRIGHT © 1997 VICTOR COMPANY OF JAPAN, LTD. E/EH Printed in Japan 0597HOV * UN * VP VICTOR COMP ANY OF JAPAN, LIMITED Auto Set Up – referring to the display panel The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically . BEFORE YOU ST ART PLEASE MAKE SURE THA T : n The TV aerial cable is[...]