Konica Minolta 1800767-001A manuel d'utilisation

magicolor 2400W User’s Guide ® 4139-7733-01A 1800767-001A[...]

Thank You Thank you for purchasing a magico lor 2400W . Y ou have made an excellent choice. Y our magicolor 2400W is specially design ed for optima l performance in Wind ows environments. Trademarks KONICA MINOL T A and the KONICA MINO L T A logo are trademarks or registered trademarks of KONICA MINOL T A HOLDINGS, INC. magicolor is a trademark or [...]

Contents Contents i 1 Introduction ... .................... ....................... ................... ....................... ............... 1 Getting Acquainted with Your Printer 2 Space Requirements 2 Printer Parts 3 Front View 3 About the Control Panel 4 About the Indicato rs 4 Status Messages (Ready Indicator, Error Indicator) 5 Status Messa[...]

Contents ii Uninstallin g the Printer Driver 10 Displaying Printer Driver Settings 10 Windows XP 10 Windows 2000/Me/98SE 11 Using the Printer Driver 11 Common Buttons 11 OK 11 Cancel 11 Apply 11 Help 11 Easy Set 11 Page Layout 12 Printer Figure 12 Setup Tab 12 Paper Tab 12 Quality Tab 13 3 Using the Statu s Display ............. ...................[...]

Contents iii Loading Media 29 Tray 1 (Multipurpose Tray) 29 Loading Plain Paper 29 Other Media 31 Loading Envelopes 31 Loading Label Sheets/Postcards/T hick Stock/T ransparencies 35 Manual Duplexing 37 How do I manually duplex? 37 Output Tray 38 Media Storage 38 5 Replacing Consumables ........... ...................... ...................... .....[...]

Contents iv A Appendix ........ .................... ...................... .................... ...................... .............. 85 Safety Specifications 86 Technical Specifications 86 Printer 86 Consumable Life Expe ctancy Chart 88 Our Concern for Environmental Pro tection 88 What is an ENERGY STAR product? 88[...]

Introduction[...]

Getting Acquainted with Your Printer 2 Getting Acquainted with Your Printer Space Requirements T o ensure easy operation, consum able replacement and maintenance, adhere to the recommended space requirements detailed below . 430 mm (16.9") 341 mm (13.4") 259 mm (10.2") 600 mm (23.6") 31 mm (1.2") 489 mm (19.3") 520 mm [...]

Getting Acquainted wi th Your Printer 3 Printer Parts The following drawing s illustrate the parts of your printer re ferred to through - out this guide, so please take some time to become familiar with them. Front View 1—Output tray 2—C ontrol panel 3—Front cover 4—Tray 1 (Multipurpose tray) 5—Po wer switch 6—T op cover 7—Tr ansfer b[...]

About the Control Panel 4 About the Control Panel 1—Ready indicator 2—Error indicator 3—Rotate T oner key 4—T oner in dicators 5—Cancel key About the Indicators The indicators use five types of signals:  Off  On  Slow blinking—1 blink every 2 seconds  Blinking—1 blink per second  Rapid blinking—2 blinks per secon d 12[...]

About the Control Panel 5 Status Messages (Ready Indicator, Error Indic ator) S tatus messages indicate the current condition of the printer . The printer sta - tus also can be checked on the S tatus Display . (Refer to “Working with the S tatus Display” on p age 16 .) Status Messages (Toner Indicators) The amount of toner remaining also can be[...]

About the Control Panel 6 About the Rota te Toner KEY Pressing the Rotate T oner key once moves the cyan toner cartridge so that it can be replaced. With each additio nal press of the Rotate T oner key , the black, yellow , then magenta toner cartridge moves so that they can be replaced. About the Cancel KEY The Cancel key allows you to:  Contin[...]

Software Installation[...]

Utilities and Docu mentation CD-ROM 8 Utilities and Documentation CD-ROM Drivers  " For detail on the installation of t he printer drivers, refer to the magi - color 2400W In stallation Guide. Utilities Drivers Use/Bene fit Printer Driver fo r Windows XP/2000 These drivers give you access to all of the printer features, includi ng finishing[...]

System Requirements 9 System Requirements  Personal co mputer Celeron 333 MHz o r higher  Operating System Microsoft Windows XP Home Edition/Profession al, Windows 2000 Pro - fessional, Windows Me, Windows 98SE  Free hard disk space – Approximately 128 MB of free hard disk space for printer driver and S tatus Display – Approximately 12[...]

Uninstalling the Printer Driver 10 – (Windows Me/98SE) From the Sta rt menu, choose Settings a nd then Printers to display the Printers directory . Right-click the KONICA MINOL T A magicolor 2400W printer icon and choose Properties . Choose Printer Proper - ties . 2 Select the Paper tab. Select the default settings for your printer , such as the [...]

Using the Printer Driver 11 Windows 2000/Me/98SE 1 From the Star t menu, point to Settings , and then click Printers to display the Printers directory . 2 Display the printer driver settings:  Wind ows 2000 —Right-click the KONICA MINOL T A magicolor 2400W printer icon and choose Printing Preferences .  Window s Me/98SE —Right-click the m[...]

Using the Printer Driver 12 Page Layout Check this option button to display a sample of the page layout in the figure area. Printer Figure Check this option button to display an im age of the printe r in the figure area. Setup Tab The Setup t ab allows you to  Print several pages of a document on the same page (n-up printing)  Provide a wat e[...]

Using the Printer Driver 13 Quality Tab The Quality tab allows you to  Switch between color and monochrom e printing  S pecify color matching (Images, Graphi cs and T ext)  S pecify the resolution for the printout  Control the tones of an image (Contrast)  Control the darkness of an image (Brightness)  Control the color purity of [...]

[...]

Using the Status Display[...]

Working with the Status Display 16 Working with the Status Display Introduction The S tatus Display shows information about the current status of the printer (and its supplies) and allows you to spec ify various settin gs such as the time until the printer enters Energy Saver mode. Opening the Status Displa y and Showing the Supplies Status Use one[...]

Recognizing Status Display Alerts 17  Printer St atus Figure —Shows a graphic representation of the printer and indicates where the problem is.  Printing S tatus —Displays the status of the current print job.  Popup Setting —Allows you to choose which message(s) you want to bring to the fore ground when that pa rticular condition occ[...]

Recovering from a Status Display Alert 18 Recovering from a Status Display Alert When the St atus Display no tifies you of a printing problem, double-click its icon on the Windows task bar to open t he S tatus Display . The S tatus Display identifies what type of error has occurred. Closing the Status Display T o close the S tatus Display from the [...]

Using Media[...]

Media Specifications 20 Media Specifications What types and sizes of media can I load?  " For custom sizes, use the printer dr iver to specify the setti ngs within the ranges shown in the above table. Media Media Size Inch Millimeter A4 8.2 x 11.7 210.0 x 297.0 A5 5.9 x 8.3 148.0 x 210.0 B5 (JIS) 7.2 x 10.1 182.0 x 257.0 B5 (ISO) 6.9 x 9.8 [...]

Media Types 21 Media Types Before purchasing a l arge quantity of specia l media, do a trial printing with the same media and check the print quality . Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to printer .kon icaminolta.com. Plain Paper Use plain paper that is  S[...]

Media Types 22  Adhesive  Folded, creased, curled, e mbossed, warped, or wrinkl ed  Perforated, three-hol e punch ed, or torn  T oo slick, too coarse, or too textured  Different in texture (roughness) on the front and back  T oo thin or too thick  S tuck together with static electricity  Composed of foil or gilt; too luminou[...]

Media Types 23 Envelopes Print on the front (address) side only . Some parts of the envelope consist of three layers of p aper—the front, back, and flap. Anything printed in these lay - ered regions may be lost or faded. Use envelopes that are  Common office envelopes ap proved for laser printing with diag onal joints, sharp folds and edges, a[...]

Media Types 24 Labels A sheet of labels consists of a face sh eet (the printing su rface), adhesive, and a carrier sheet:  The face sheet must follow t he plain paper specification.  The face sh eet surface must cover the entire carrier sheet, and no adhe - sive should come through on the surface. Y ou can print continuously with label sheets[...]

Media Types 25 Letterhead Format letterhead data within your application. Try printing your dat a on a sheet of plain paper first to check placement. Postcards Format postcard data within your application. Try printing your data on a sheet of plain paper first to check placement. Use postcards that are  Approved for laser printers DO NOT use pos[...]

Media Types 26  Folded or wr inkled Transparencies  " Do not fan transparencies before loading them. Resu lting static elec - tricity may cause printing errors.  " If you touch the face of the trans parencies with your bare hands, print quality may be affected.  " Keep the printer path clean. T ransparencies are especiall[...]

Media Types 27 Use transparencies that are  Approved for laser printing DO NOT use transparencies that  Have static electricity that wi ll cause them to stick together  Are specified for inkjet printers Glossy Stock T est all glossy stock to en sure acceptable performanc e and to ensure that the image does not shift. DO NOT use gloss y sto[...]

Media Types 28  " When printing on glossy stock, t he top margin is 10 mm (0.3 94 " ). Imageable Area—Envelopes Envelopes have a nonguaranteed imagea ble area that varies with envelope type.  " The envelope print orienta - tion is deter - mined by your appli - cation. Page Margins Margins are set through your applicati on. So[...]

Loading Media 29 Loading Media How do I load media? T ake off the top and bottom sheets of a ream of paper . Hol ding a stack of approx - imately 200 sheets at a time, fan the stack to prevent static buildup before inserting it in a tray .  " Do not fan transparencies. Note Although this prin ter was designed for printin g on a wide range o[...]

Loading Media 30 2 Slide the media guides to pro - vide more space between them. 3 Load the paper face up in the tray .  " Do not load paper above the M mark. Up to 200 sheets (80 g/m 2 [22 lb]) of plain paper can be loaded into the tray at one time.[...]

Loading Media 31 4 Slide the media guides against the edges of the paper . Other Media When loading media other than p lain paper , set the me dia mode (for exam - ple, Envelope, La bel, Thick S tock 1, Thick S tock 2, or T ransparency) in the driver for optimum print quality . Loading Envelopes 1 Open T ray 1. 2 Remove any media in the tray .[...]

Loading Media 32 3 Slide the media guides to pro - vide more space between them. 4 Load the envelopes flap side down in the tray .  " Before loading enve - lopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed, other - wise the envelopes may become wrinkled or a media misfe[...]

Loading Media 33 5 Slide the media guides against the edges of the envelo pes. 6 Pull the lever , and then open the top cover .  " If there is paper in the output tray , remove it, and then fold up the out - put tray before opening the top cover.  " Do not touch the transfe r belt.[...]

Loading Media 34 7 Raise th e lever on the f user unit. 8 Carefully close the top cover .  " Before printing on media other than envelopes, be sure to move the lever on the fuser unit to it s origi - nal position.[...]

Loading Media 35 Loading Label Sheets/Postcards/Thick Stock/ Transparencies 1 Open T ray 1. 2 Remove any media in the tray . 3 Slide the media guides to pro - vide more space between them. 4 Load the media face up in the tray .  " Up to 50 sheets can be loaded into the tray at one time.[...]

Loading Media 36 5 Slide the media guides against the edges of the media.[...]

Manual Duplexing 37 Manual Duplexing Select paper with high opacity for duplex (2-sided) printing. For best results, print a small quantity to make sure the opacity is acceptable. Only plain paper can be used for manual duplexing. Other types of paper cannot be used. How do I manually duplex? 1 In the printer driver ( Setup tab / Duplex / Booklet )[...]

Output Tray 38 Output Tray All printed media is output to the face-d own output tray on top of the printer . This tray has a capacity of approxim ately 200 sheets (A4/Letter) of 80 g/m 2 (22 lb) paper .  " If the media is stacked too high in the output tray , your printer may experience media misfeeds, excessive media curl, or static buildu[...]

Replacing Consumables[...]

Replacing Consumables 40 Replacing Consumables Note Failure to f ollow instructions as outlined in thi s manual could result in voiding your warranty . Refilled Toner Cartridges Note Do not use refil led toner c artridges. A ny damage to the printer o r quality problems caused by a refilled toner cartridge will void your wa rranty . No technical su[...]

Replacing Consumables 41 When replacing a toner cartridge, refer to the followi ng table. For optimum print quality and performance, use o nly approved KONICA MINOL T A toner cartridges for your specific printer ty pe, as listed in the table below . If you open the top cover , you can find your printer type and the toner cartridge part numbers on t[...]

Replacing Consumables 42 Keep toner cartridges:  In their packaging until you’re ready to install them.  In a cool, dry lo cation away from su nlight (due to h eat). The maximum storage temperature is 35 ° C (95 ° F ) and the maximum storage humi dity is 85% (nonco ndensing) . If the toner cartridge is mo ved from a cold place to a warm, [...]

Replacing Consumables 43 Replacing a Toner Ca rtridge Note Be careful not to sp ill toner while re placing a toner cartridge. If toner spills, immediately wipe it off with a soft, dry cloth. When the toner is empty , the to ner indi cator lights up. Follow the procedure described below to replace the toner cartridge. 1 Check the control panel to se[...]

Replacing Consumables 44 3 Pull the lever , and then o pen the top cover .  " If there is paper in the output tray , remove it, and then fold up the out - put tray before opening the top cover.  " Do not touc h the transfer belt. 4 Check that the to ner cartridge to be replaced has b een moved to the front, and then open the front c[...]

Replacing Consumables 45 5 Pull the handle on the toner car - tridge toward you, and then pull the toner cartrid ge up to remove it.  " Do not manually rotate the toner cartridge carou - sel. In addition, do not rotate the carousel with force, otherwise it may be damaged. Note Dispose of the empty ton er cartridge accord ing to your local r[...]

Replacing Consumables 46 8 Remove the cover from the toner roller .  " Do not touch or scra tch the toner roller. 9 Align the shaft on each end of the toner cartridge with its hold - ers, and then insert the car - tridge.  " Before inserting the toner cartridge, make sure that the color of the toner car - tridge to be inst alled is [...]

Replacing Consumables 47 11 Close the front cover . 12 Carefully close the top cover .  " When the top cover is closed, the black toner cartridge auto matically moves so that it can be replaced. With each press of the Rotate T oner key , the yellow , then magenta toner cartridge moves so that it can be replaced. 13 Press the Cancel key to r[...]

Replacing Consumables 48 Replacing the Drum Cartridge 1 Pull the lever , and then o pen the top cover .  " If there is paper in the output tray , remove it, and then fold up the out - put tray before opening the top cover.  " Do not touc h the transfer belt. 2 Carefully pull out the drum car - tridge. Note Dispose of the used drum c[...]

Replacing Consumables 49 3 Prepare the new drum cartridge.  " Do not touch the PC drum on the drum car - tridge. 4 Install the new drum cartridge. 5 Carefully close the top cover .[...]

Replacing Consumables 50  " The printer must complete a calibra tion cycle (less than 2 minutes) after the drum cartridge has been replaced. If you open a cover before the printer is reset, the calibration sto ps, then start s over again af ter the cover is closed .[...]

Maintaining the Printer[...]

Maintaining the Printer 52 Maintaining the Printer CAUTION Read all caution and warning lab els ca refully , making sure to follow an y instructions contained in them. These labels are located on the inside of the printer ’s covers and the interior of the printer b ody . Handle the printer with care to pres erve its life. Abuse may cause damage a[...]

Maintaining the Printer 53  Do not leave the printer ’s covers open for any length of ti me, especially in well-lit places; light may damage the drum cartridge.  Do not open the printer during prin ting.  Do not tap media st acks on the printer .  Do not lubricate or disassemble the printer .  Do not tilt the printer .  Do not t[...]

Cleaning the Printer 54 Cleaning the Printer CAUTION Be sure to turn off the printer and u nplug the power cord be fore cleaning. Exterior Control Panel Ventilation Grille Filter Printer Exterior[...]

Cleaning the Printer 55 Interior Cleaning the Media Feed Roller and Laser Lens 1 Pull the lever , and then open the top cover .  " If there is paper in the output tray , remove it, and then fold up the out - put tray before opening the top cover.  " Do not touch the transfe r belt. 2 Slowly pull out the dru m car - tridge.[...]

Cleaning the Printer 56 Note Position the removed drum cartr idge as shown in the il lustration at the ri ght. Be sure to keep the drum cartridge horizont al and place it where it will not become dirty . Do not leave the drum cartridge removed for more th an 15 minutes, and do not place the remove d drum cartridge in a location where it would be ex[...]

Cleaning the Printer 57 4 Clean the laser lens by wiping them with a soft, dry cloth. 5 Reinstall the drum cartridge. BOTTO M[...]

Storing the Printer 58 6 Carefully close the top cover . Storing the Printer Note If this printer is not to be used for an extended period of time, store the prin ter with the fuser separator levers raised (set to the envelope position).[...]

Troublesho oting[...]

Introduction 60 Introduction This chapter provides information to aid you i n resolving printer prob lems you may encounter , or at least guide you to th e proper sources for help. Preventing media misfe eds Page 61 Understanding the media path Page 62 Indicator Messages Page 62 Clearing media misfeeds Page 65 Solving problems with media mi sfeeds [...]

Preventing Media Misfeeds 61 Preventing Media Misfeeds Make sure that... Media matches the printer specifications. Media is flat, especiall y on the leading edge. The printer is on a hard, flat, level surface. Y ou store media in a dry location away from moisture and humidity . Y ou remove transparencies from the out put tray immediately after prin[...]

Understanding th e Media Path 62 Understanding the Media Path Understanding the printer ’s media path will help you locate media misfeed s. 1 Output tray 2 T ransfer belt unit 3 T oner cartridge carousel 4 Drum cartridge 5 T ray 1 6 Fuser unit Indicator Messages The control panel indicato rs (Ready , Error) provide information about yo ur printer[...]

Indicator Messa ges 63 Rapid blinking alter - nately The tray ran ou t of paper while printing. Load media into Tr a y 1. No media in the tray specified in the printer driver . Load the appropriate type of media into T ray 1. Media size error If the “Auto Continue” has been activated in the S tatus D isplay , the sheet already fed in, is auto -[...]

Indicator Messages 64 Service Message This message indicates a more serious fault tha t can only be co rrected by a customer servic e engineer . Ready indicator (green) Error indicator (orange) Condition Action Off Rapid blink - ing Fatal error T urn the printer off, then on again. If the problem persist s, contact your vendor or authorized ser - v[...]

Clearing Media Misfeeds 65 Clearing Media Misfeeds T o avoid damage, always remove misfed media gen tly , wi thout tearing it. Any pieces of media left in the printer , whether large or small, can obstruct the media path and cause further misfee ds. Do not rel oad media that has misfe d. Note The image is not fixed on the media before th e fusing p[...]

Clearing Media Misfeeds 66 Clearing Procedures 1 Pull the lever , and then o pen the top cover .  " If there is paper in the output tray , remove it, and then fold up the out - put tray before opening the top cover.  " Do not touc h the transfer belt. 2 Slowly pull out the drum car - tridge.[...]

Clearing Media Misfeeds 67 Note Position the removed drum cartridge as shown in the illustration at the right. Be sure to k eep the drum cartridge horizont al and place it where i t will not become dirty . Do not leave the drum cartridge removed for more than 15 minutes, and do not place the removed dru m cartridge in a location w here it would be [...]

Clearing Media Misfeeds 68 4 Reinstall the drum cartridge.[...]

Clearing Media Misfeeds 69 5 Carefully close the top cover .[...]

Solving Problems with Media Misfeeds 70 Solving Problems with Media Misfeeds  " Frequent misfeeds in any area indicate that area should be checked , repaired, or cleaned. Repeated misf ee ds may also happen if you’re using unsupported pri nt media. Symptom Cause Solution Several sheets go through the printer together . The front edges of [...]

Solving Problems wi th Media Misfeeds 71 Media is misfeeding. Envelopes are facing the wrong way in Tray 1. Load the envelop es in Tray 1 so the flaps are facing down. If the flaps are on the long edge, load the envelopes with the flap to ward the left of the printer . T ransparencies have collected static elec - tricity in the tray . Remove the tr[...]

Solving Other Problems 72 Solving Other Problems  " T o order KONICA MINOL T A consumables, go to www .q-shop.com. Symptom Cause Solution Printer power is not on. The power cord is not correctly plugged into the outlet. T urn off the printer , confirm that the power cord is correctly p lugged into the outlet, and then turn on the printer . [...]

Solving Other Problems 73 Not all pages print. The printer has the wrong kind of cable, or the prin ter is not configured for the correct cable and port. Check your cable. The Cancel key was pressed. Make sure no one pressed th e Cancel key while your job was printing. The tray is empty . Check that the trays are l oaded with media, in place, and s[...]

Solving Other Problems 74 Media is wrinkled. The media is moi st from humidity or hav - ing water spilled on it. Remove the moist media and rep lace it with new , dry media. The media feed roller or fuser unit is defec - tive. Check them for damage. If necessary , contact T echnical Support with th e error information. Unsupported media (wrong size[...]

Solving Problems with Printing Quality 75 Solving Problems with Printing Quality Symptom Cause Solution Nothing is printed, or there are blank spots on the printed page. One or more of the toner cartridges are defective. Remove the toner cartridge an d check for damage. If it is damage d, replace it. The printer driver is not set correctly . Select[...]

Solving Problems with Printing Quality 76 Entire sheet is printed in black or color . One or more of the toner cartridges are defective. Remove the toner cartridge and check for damage. If it is da maged, replace it. The drum cartridge is defective. Remove the drum cartridge and check for damage. If it is damaged , replace it. Image is too light; t[...]

Solving Problems with Printing Quality 77 Image is blurred; background is lightly stained; there is insufficient gloss of the printed image. One or more of the toner cartridges are defective. Remove the toner cartridge an d check for damage. If it is damaged, replace it. The drum cartridge is defective. Remove the drum cartri dge and check for dama[...]

Solving Problems with Printing Quality 78 There is insufficient fusing or the image comes off when rubbed. The media is moi st from humidity . Remove the moist media an d replace it with new , dry media. Unsupported media (wrong size, thick - ness, type, etc.) is being used. Use KONICA MINOL T A-approved media. See “Media S pecifications” on pa[...]

Solving Problems with Printing Quality 79 Abnormal areas (white, black, or color) appear in a regular pat te rn . The laser lens is dirty . Clean the laser lens. The toner cartridge is defective. Remove the toner cartridge with the color causing the abnorma l image. Replace it with a new toner cartrid ge. The drum cartridge is defective. Remove the[...]

Solving Problems with Printing Quality 80 If the problem is not resolved, even after all of the above have been per - formed, contact T echnica l Support with the error information. For contact information, refer to the General Information Guide. Colors are not regist er - ing properly; colors are mixed or have page- to-page vari - ation. The top c[...]

Installing Accessories[...]

Dust Cover 82 Dust Cover The dust cover is a standard printer feature in the Americas, but an optional accessory in other areas. Contact your vendor or go to printer . konicaminolta.com for purchase informa - tion. When the dust cover is attached to T ray 1, the media is protected from dust, and operating noises from printing are reduced. We recomm[...]

Dust Cover 83 3 Attach the lid to the dust cover . Loading Media in Tr ay 1 with the Dust Cover installed 1 Remove the lid from the dust cover , and then open the front panel of the dust cover . 2 Slide the media guides to pro - vide more space between them.[...]

Dust Cover 84 3 Load the media face up in the tray .  " Do not load ab ove the M mark. Do not load more than 10 envelopes or 50 sheets of labels, post - cards, thick stock, or tr ansp arencie s at one time. 4 Slide the media guides against the edges of the media. 5 Close the front panel of the dust cover , and then reattach the lid to the d[...]

Appendix[...]

Safety Specifications 86 Safety Specifications Technical Specifications Printer Printer Safety standards U.S. model UL 60950-1, CSA C22.2 No. 60950-1-03 European model EU Directive 73/23/EEC EU Directive 93/68/EEC EN 60950-1 (IEC 60950-1) China model GB 4943 EMC standards U.S. model FCC part 15 subpart B class B ICES-003 European model EU Directive[...]

Technical Specifications 87 W arm-up time 100 V/120 V: 45 seconds or less 220 to 240 V: 49 seconds or less Media sizes Paper width: 92 to 216 mm (3.6 to 8.5") Paper length: 148 to 356 mm (5.9 to 14.0") Paper/Media • Plain paper (60 to 90 g/m 2 ; 16 to 24 lb) • T ransparency • Envelope • Thick S tock (91 to 163 g/m 2 ) •P o s t c[...]

Our Concern for Environmental Protection 88 Consumable Life Expectancy Chart Our Concern for Environmental Protection As an ENERGY ST AR ® Partner , we have determined that this machine me ets the ENERGY ST AR Gu idelines for energy efficiency . What is an ENERGY STAR product? An ENERGY ST AR product has a special feature that allows it to automat[...]

Index Index 89 A Accessory Dust cover 82 C Consumables Toner cartridge 40 D Dust cover 82 E Envelope 23 G Glossy 27 I Imageable area 27 Indicator Error messages 62 Service messages 64 Status message 5 L Labels 24 Letterhead 25 Loading medi a 29 M Maintenance 52 Manual duplexing 37 Media Clearing misfeeds 65 Imageable area 27 Loading 29[...]

Index 90 Path 62 Preventing misfeeds 61 Media path 62 Media storag e 38 Media type Envelope 23 Glossy 27 Labels 24 Letterhead 25 Plain paper 21 Postcard 25 Thick stock 22 Transparency 26 Misfeed problems 70 Clearing 65 Media path 62 Preventing 61 N N-up 73 O Output tray 38 Overlay printing 73 P Page margins 28 Paper tab 12 Plain paper 21 Postcard 2[...]