Lenovo 5027 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 194 pages
- 6.31 mb
Aller à la page of 194
Les manuels d’utilisation similaires
-
Laptop
Lenovo 1765
154 pages 6.61 mb -
Laptop
Lenovo IDEAPAD Z370
67 pages 3.81 mb -
Laptop
Lenovo 8700
96 pages 1.65 mb -
Laptop
Lenovo S100
41 pages 2.06 mb -
Laptop
Lenovo 59385443
46 pages 3.92 mb -
Laptop
Lenovo G585
59 pages 8.18 mb -
Laptop
Lenovo 4105
70 pages 2.52 mb -
Laptop
Lenovo 9683
68 pages 1.05 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Lenovo 5027. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Lenovo 5027 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Lenovo 5027 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Lenovo 5027 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Lenovo 5027
- nom du fabricant et année de fabrication Lenovo 5027
- instructions d'utilisation, de réglage et d’entretien de l'équipement Lenovo 5027
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Lenovo 5027 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Lenovo 5027 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Lenovo en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Lenovo 5027, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Lenovo 5027, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Lenovo 5027. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
ThinkCentr e Har dwar e Maint enance Manual Machine T ypes: 0266, 0384, 2491, 4168, 5027, 5067, 7516, and 7519[...]
-
Page 2
[...]
-
Page 3
ThinkCentr e Har dwar e Maint enance Manual Machine T ypes: 0266, 0384, 2491, 4168, 5027, 5067, 7516, and 7519[...]
-
Page 4
Note Before using this information and the pr oduct it supports, be sur e to read and understand the Chapt er 2 “Safety information” on page 3 and Appendix A “Notices” on page 183. F ourth Edition (August 2011) © Copyright Lenovo 2011. LIMITED AND RESTRIC TED RIGHT S NO TICE: If data or softwar e ar e delivered pursuant a General Services [...]
-
Page 5
Contents Chapter 1. About this manual . . . . . . 1 Important safety information . . . . . . . . . . 1 Important information about r eplacing RoHS compliant FRUs . . . . . . . . . . . . . . . 1 Chapter 2. Safety information . . . . . . 3 General safety . . . . . . . . . . . . . . . . 3 Electrical safety . . . . . . . . . . . . . . . 3 V oltage-sele[...]
-
Page 6
Adapters and miscellaneous FRUs . . . . . . . 147 P ower Cords . . . . . . . . . . . . . . . 149 Recovery discs . . . . . . . . . . . . . . 156 Windows 7 Pr ofessional 32 Recovery CD . . 156 Windows 7 Home Basic 32 Recovery CD . . 162 Windows 7 Home Pr emium 64 Recovery CD . . . . . . . . . . . . . . . . . 163 Windows 7 Home Pr emium 32 Recovery CD[...]
-
Page 7
Chapter 1. About this manual This manual contains service and r eference information for ThinkCentre® computer machine types listed on the front cover . This manual is intended only for trained servicers who are familiar with Lenovo® computer products. Note: Be sur e to r ead and understand the Chapter 2 “Safety information” on page 3 befor e[...]
-
Page 8
Note: RoHS and non-RoHS FRU part numbers with the same t and function are identied with unique FRU part numbers. Lenovo plans to tr ansition t o RoHS compliance well before the implementation date and expects its suppliers to be r eady to support L enovo's r equirements and schedule in the EU . P roducts sold in 2005 will contain some Ro[...]
-
Page 9
Chapter 2. Safety information This chapter contains the safety information that you need t o be familiar with before servicing a computer . General safety F ollow these rules to ensur e general safety: • Observe good housekeeping in the area of the machines during and after maintenance. • When lifting any heavy object: 1. Ensur e you can stand [...]
-
Page 10
Important: Use only approved t ools and t est equipment. Some hand tools have handles cover ed with a soft material that does not insulate you when working with live electrical curr ents. Many customers have, near their equipment, rubber oor mats that contain small conductive bers to decr ease electrostatic dischar ges. Do not use this type o[...]
-
Page 11
V oltage-selection switch Some comput ers are equipped with a voltage-selection switch located near the power -cord connection point on the computer . If your comput er has a voltage-selection switch, ensure that you set the switch to match the voltage available at your electrical outlet. Setting the voltage-selection switch incorrectly can cause p[...]
-
Page 12
5. Check for any obvious alt erations. Use good judgment as t o the safety of any alt erations. 6. Check inside the unit for any obvious unsafe conditions, such as metal lings, contamination, wat er or other liquids, or signs of r e or smoke damage. 7. Check for worn, fr ayed, or pinched cables. 8. Check that the power-supply cover fasteners [...]
-
Page 13
• F rench • German • Hebrew • Italian • Kor ean • Spanish DANGER Electrical curr ent fr om power , telephone and communication cables is hazardous. T o avoid a shock hazard: • Do not connect or disconnect any cables or perform installation, maintenance, or r econguration of this product during an electrical storm. • Connect all p[...]
-
Page 14
CA UTION: When laser products (such as CD-ROMs, DVD-ROM drives, ber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser r adiation. Ther e are no serviceable parts inside the device. • Use of controls or adjustments[...]
-
Page 15
Chapter 2 . Safety information 9[...]
-
Page 16
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) 1 2 PERIGO 10 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 17
A corrent e elétrica pr oveniente de cabos de alimentação, de telefone e de comunicações é perigosa. P ara evitar risco de choque elétrico: • Não conecte nem desconecte nenhum cabo ou ex ecute instalação, manut enção ou recongur ação deste pr oduto dur ante uma tempestade com raios. • Conecte todos os cabos de alimentação a t[...]
-
Page 18
• Não r emova as tampas. A remoção das tampas de um pr oduto a laser pode r esultar em exposição prejudicial à r adiação de laser . Não e xistem peças que podem ser consertadas no interior do dispositivo. • A utilização de contr oles ou ajust es ou a ex ecução de pr ocedimentos diferent es dos especicados aqui pode resultar em [...]
-
Page 19
Chapter 2 . Safety information 13[...]
-
Page 20
1 2 14 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 21
Chapter 2 . Safety information 15[...]
-
Page 22
1 2 DANGER Le cour ant électrique pr ovenant de l'alimentation, du téléphone et des câbles de transmission peut présenter un danger . P our éviter tout risque de choc électrique : • Ne manipulez aucun câble et n'effectuez aucune opér ation d'installation, d'entr etien ou de recongur ation de ce produit au cours d&a[...]
-
Page 23
Connexion Déconnexion 1. Mettez les unités HORS TENSION. 2. Commencez par brancher tous les cordons sur les unités. 3. Branchez les câbles d'interface sur des connecteurs. 4. Branchez les cor dons d'alimentation sur des prises. 5. Mettez les unités SOUS TENSION. 1. Mettez les unités HORS TENSION. 2. Débranchez les cor dons d'a[...]
-
Page 24
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) A TTENTION: Soulevez la machine avec précaution. A TTENTION: L'interrupteur de contrôle d'alimentation de l'unité et l'interrupteur dubloc d'alimentation ne coupent pas le courant électrique alimentantl'unité. En outre, le système peut être équipé de p[...]
-
Page 25
• Die V erbindung zu den angeschlossenen Netzkabeln, T elekommunikationssystemen, Netzwerken und Modems ist vor dem Öffnen des Gehäuses zu unterbrechen, sofern in den Installations- und Kongur ationsproz eduren k eine anders lautenden Anweisungen enthalten sind. • Zum Installieren, T r ansportieren und Öffnen der Abdeckungen des Computers[...]
-
Page 26
Laserstrahlung bei geöffneter V erkleidung. Nicht in den Strahl blicken. K eine Lupen oder Spiegel verwenden. Str ahlungsbereich meiden. ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgu[...]
-
Page 27
Chapter 2 . Safety information 21[...]
-
Page 28
1 2 PERICOL O La corr ente elettrica pr oveniente dai cavi di alimentazione, del t elefono e di comunicazione può essere pericolosa. P er evitare il rischio di scosse elettriche: • Non collegar e o scollegare qualsiasi cavo oppure effettuar e l'installazione, la manutenzione o la ricongurazione del prodotto dur ante un temporale. • Col[...]
-
Page 29
• Se possibile, utilizzare solo una mano per collegare o scollegare i cavi di segnale. • Non accender e assolutamente apparecchiature in presenza di incendi, perdite d'acqua o danno strutturale. • Scollegare i cavi di alimentazione, i sistemi di telecomunicazione, le reti e il modem prima di aprire i coperchi del dispositivo, salvo istru[...]
-
Page 30
PERICOL O Alcune unità laser contengono un diodo laser di Classe 3A o Classe 3B. T ener presente quanto segue: Aprendo l'unità vengono emesse r adiazioni laser . Non ssare il fascio, non guar darlo direttamente con strumenti ottici ed evitare l'esposizione al fascio. ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) A TTENZI[...]
-
Page 31
Chapter 2 . Safety information 25[...]
-
Page 32
1 2 PELIGRO La corrient e eléctrica pr ocedente de cables de alimentación, t eléfonos y cables de comunicación puede ser peligrosa. Par a evitar el riesgo de descarga eléctrica: • No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconguración de este producto durante una tormenta eléctrica. ?[...]
-
Page 33
• Desconecte los cables de alimentación, los sistemas de telecomunicaciones, las redes y los módems conectados antes de abrir las cubiertas de los dispositivos, a menos que se indique lo contrario en los pr ocedimientos de instalación y congur ación. • Conecte y desconecte los cables, como se describe en la tabla siguiente, cuando instal[...]
-
Page 34
Algunos product os láser tienen incorporado un diodo láser de clase 3A o clase 3B. T enga en cuenta lo siguiente: Cuando se abre, queda e xpuesto a radiación láser . No mir e dir ectamente al rayo láser , ni siquiera con instrumentos ópticos, y evite exponerse directamente al rayo láser . ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2[...]
-
Page 35
Chapter 3. Gener al information This chapter pr ovides gener al information that applies to all machine types supported by this manual. Lenovo W elcome The Lenovo W elcome progr am intr oduces you to some innovative built-in featur es of Lenovo and guides you through a few important setup tasks to help you make the most of your computer . Lenovo Th[...]
-
Page 36
Note: The ThinkV antage Pr oductivity Center pr ogram is only available on computers pr einstalled with the Windows Vista oper ating system from Lenovo. T o access the ThinkV antage Pr oductivity Cent er progr am, click Start ➙ All Progr ams ➙ ThinkV antage ➙ Productivity Center . Additional information r esources If you have Internet access,[...]
-
Page 37
Specications This section lists the physical specications for your comput er . Dimensions Width: 275 mm (10.83 inches) Height: 79 mm (3.11 inches) Depth: 238 mm (9.37 inches) Weight Maximum conguration as shipped: 4.18 kg (9.22 lb) Environment • Air t emperatur e: Operating: 10°C to 35°C (50°F to 95°F) Non-operating: -40°C to 60°C [...]
-
Page 38
32 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 39
Chapter 4. Gener al check out Attention The drives in the comput er you ar e servicing might have been rearr anged or the drive startup sequence changed. Be extr emely careful during write oper ations such as copying, saving, or formatting. Data or progr ams can be overwritten if you select an incorr ect drive. General err or messages appear if a p[...]
-
Page 40
• If the LED is not illuminat ed (off ), go t o step 2 on page 34 2. Check the status of the power indicator LED on the A C/DC power adapter . • If the LED is illuminated (on), go to step 7 on page 34 . • If the LED is not illuminated (off ), go to the ne xt step 3 on page 34 . 3. V erify that the power cor d is pr operly connect ed to an A C[...]
-
Page 41
5. Have the same softwar e versions and levels 6. Have the same diagnostic diskett es (version) 7. Have the same conguration options set in the system 8. Have the same setup for oper ating-system-contr olled les Comparing the conguration and software setup between “working and non-working” systems will often lead to problem resolution.[...]
-
Page 42
36 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 43
Chapter 5. Diagnostics Diagnostic pr ograms are used t o test har dware components of your computer . Diagnostic progr ams can also report operating-syst em-controlled settings that int erfere with the corr ect oper ation of your computer . Y ou can use the preinstalled L enovo ThinkV antage T oolbox pr ogram to diagnose comput er problems, if your[...]
-
Page 44
Running the diagnostic progr am from a diagnostic disc This section provides instructions on how to run the diagnostic pr ogram fr om a diagnostic disc that you creat ed. T o run the diagnostic pr ogram from a diagnostic disc that you creat ed, do the following: 1. Make sur e the optical drive you want to use is set as the rst boot device in the[...]
-
Page 45
T est results Diagnostics test results produce the following err or code format: F unction Code F ailure T ype DeviceID Date ChkDigits T ext • F unction Code: Represents the featur e or function within the PC. • F ailure T ype: Represents the type of err or encountered. • DeviceID: Contains the component's unit-ID which corr esponds to e[...]
-
Page 46
Viewing the test log Errors report ed by the diagnostic t est will be displayed by the progr am as a failed test. T o view details of a failur e or t o view a list of test results, use the following pr ocedure fr om any t est cat egory screen: 1. P ress F3 to activate the log le. 2. P ress F3 again t o save the le t o diskette or pr ess F2 to[...]
-
Page 47
Chapter 6. Using the Setup Utility pr ogram The Setup Utility pr ogram is used to view and change the congur ation settings of your comput er , r egardless of which operating syst em you are using. However , the oper ating system settings might override any similar settings in the Setup Utility program. Starting the Setup Utility progr am T o st[...]
-
Page 48
P assword considerations A password can be any combination of up to 64 alphabetic and numeric char acters. F or security r easons, it is recommended to use a str ong password that cannot be easily compromised. T o set a strong passwor d, use the following guidelines: • Have at least eight charact ers in length • Contain at least one alphabetic [...]
-
Page 49
Note: A password can be any combination of up to 64 alphabetic and numeric char acters. F or more information, see “P assword consider ations” on page 42. Erasing lost or forgotten passwor ds (clearing CMOS) This section provides instructions on how t o erase lost or for gotten passwor ds, such as a user passwor d. T o er ase a lost or forgotte[...]
-
Page 50
Selecting a startup device If your computer does not start up fr om a device such as the disc or har d disk drive as e xpected, do one of the following to select the startup device you want. Selecting a temporary startup device Use this pr ocedure t o select a tempor ary startup device. Note: Not all discs and hard disk drives ar e bootable. 1. T u[...]
-
Page 51
Exiting from the Setup Utility pr ogram After you nish viewing or changing settings, pr ess Esc to return to the Setup Utility progr am main menu. Y ou might have to pr ess Esc sever al times. Do one of the following: • If you want t o save the new settings, pr ess F10 t o save and exit the Setup Utility progr am. • If you do not want to sav[...]
-
Page 52
46 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 53
Chapter 7. Symptom-to-FRU index The Symptom-to-FRU inde x lists err or sympt oms and possible causes. The most likely cause is list ed rst. Always begin with the Chapter 4 “Gener al check out” on page 33 . Y ou can use this inde x t o help you decide which FRUs are needed when servicing a computer . If you ar e unable t o correct the problem[...]
-
Page 54
Diagnostic Error Code FRU/Action 000-000-XXX BIOS T est P assed No action 000-002-XXX BIOS Timeout 1. Flash the system. See “Updating (ashing) the BIOS from a disc” on page 180. 2. System board 000-024-XXX BIOS Addressing test failure 1. Flash the system. See “Updating (ashing) the BIOS from a disc” on page 180 . 2. System board 000-0[...]
-
Page 55
Diagnostic Error Code FRU/Action 000-198-XXX BIOS test aborted 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 “Using the Setup Utility pr ogram” on page 41 . 2. Flash the system and re-test. See “Updating (ashing) the BIOS from a disc” on page 180 . 3. Go t o “Undetermined problems” on page 6[...]
-
Page 56
Diagnostic Error Code FRU/Action 001-041-XXX System DMA failure 1. T urn off/on the system and re-t est. 2. System board 001-195-XXX Syst em T est aborted by user Information only Restart the test, if necessary . 001-196-XXX System test halt, err or thr eshold ex ceeded 1. Pr ess F3 to r eview the log le. 2. Restart the test to reset the log [...]
-
Page 57
Diagnostic Error Code FRU/Action 001-276-XXX System IRQ9 failure 1. Device on IRQ9 2. System board 001-277-XXX System IRQ10 failure 1. Device on IRQ10 2. System board 001-278-XXX System IRQ11 failure 1. Device on IRQ11 2. System board 001-279-XXX System IRQ12 failure 1. Device on IRQ12 2. System board 001-280-XXX System IRQ13 failure 1. Device on I[...]
-
Page 58
Diagnostic Error Code FRU/Action 005-027-XXX Video Conguration/Setup err or 1. Run the Setup Utility progr am. 2. Video drivers updat e 3. Video car d, if installed 4. System board 005-031-XXX Video Device Cable failure 1. Video cable 2. Monitor 3. Video car d, if installed 4. System board 005-032-XXX Video Device Contr oller failur e 1. Video c[...]
-
Page 59
Diagnostic Error Code FRU/Action 006-196-XXX Diskett e interface test halt, error threshold ex ceeded 1. Pr ess F3 to r eview the log le. 2. Restart the test to reset the log le. 006-197-XXX Diskett e interface test warning 1. If a component is called out, make sure it is connected and/or enabled . 2. Re-run the test. 3. Replace the component[...]
-
Page 60
Diagnostic Error Code FRU/Action 015-196-XXX USB port test halt, error threshold ex ceeded 1. Pr ess F3 to r eview the log le. 2. Restart the test to reset the log le. 015-197-XXX USB port test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 “Using the Setup Utility pr ogram” on page 41 . 2[...]
-
Page 61
Diagnostic Error Code FRU/Action 018-250-XXX PCI C ard Services error 1. PCI car d 2. Riser card, if installed 3. System board 020-000-XXX PCI Interface T est P assed No action 020-0XX-XXX PCI Interface error 1. PCI car d 2. Riser card, if installed 3. System board 020-195-XXX PCI T est aborted by user Information only Restart the test, if necessar[...]
-
Page 62
Diagnostic Error Code FRU/Action 025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface failure 1. IDE signal cable 2. Check AC/DC power adapter 3. Reseat IDE signal cable 4. IDE device 5. System board 025-195-XXX IDE interface T est aborted by user Information only Restart the test, if necessary . 025-196-XXX IDE interface test halt, error threshold ex[...]
-
Page 63
Diagnostic Error Code FRU/Action 030-196-XXX SCSI interface test halt, error threshold ex ceeded 1. Pr ess F3 to r eview the log le. 2. Restart the test to reset the log le. 030-197-XXX SCSI interface t est warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 “Using the Setup Utility pr ogram” o[...]
-
Page 64
Diagnostic Error Code FRU/Action 071-00X-XXX 071-01X-XXX 071-02X-XXX Audio port error 1. Run the Setup Utility pr ogram. 2. Flash the system. See “Updating (ashing) the BIOS from a disc” on page 180 . 3. System board 071-03X-XXX Audio port failur e 1. Speakers 2. Microphone 3. Audio card, if installed 4. System board 071-04X-XXX Audio port f[...]
-
Page 65
Diagnostic Error Code FRU/Action 080-197-XXX Game P ort int erface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 “Using the Setup Utility pr ogram” on page 41 . 2. Re-run the test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 080-19[...]
-
Page 66
Diagnostic Error Code FRU/Action 086-199-XXX Mouse P ort interface test failed, cause unknown 1. See “Undet ermined problems” on page 66. 2. Flash the system and re-test. See “Updating (ashing) the BIOS from a disc” on page 180 . 3. Replace component under function test. 089-000-XXX Micr oprocessor T est Passed No action 089-XXX-XXX Micr[...]
-
Page 67
Diagnostic Error Code FRU/Action 170-199-XXX V oltage Sensor(s) test failed, cause unknown 1. See “Undet ermined problems” on page 66. 2. Flash the system and re-test. See “Updating (ashing) the BIOS from a disc” on page 180 . 3. Replace component under function test. 170-250-XXX 170-251-XXX V oltage Sensor(s) V oltage limit err or 1. AC[...]
-
Page 68
Diagnostic Error Code FRU/Action 201-XXX-XXX System Memory error 1. Replace the memory module called out by the test 2. System board 202-000-XXX Syst em Cache T est P assed No action 202-XXX-XXX System Cache err or 1. Cache, if removable 2. System board 3. Micropr ocessor 206-000-XXX Diskett e Drive T est P assed No action 206-XXX-XXX Diskette Driv[...]
-
Page 69
Diagnostic Error Code FRU/Action 305-000-XXX Monitor DDC T est Passed No action 305-250-XXX Monit or DDC self test failure 1. Run the Setup Utility pr ogram to enable DDC 2. Cable 3. Monitor 4. Video car d 5. System board 415-000-XXX Modem T est P assed No action 415-XXX-XXX Modem error Remove the Modem and re-t est the system Beep sympt oms Beep s[...]
-
Page 70
Error code POST error message Description/Action CMOS Battery F ailur e The CMOS battery is no longer functional. Replace the battery . Keyboar d err or or no keyboard present Cannot initialize the keyboar d. Make sure the keyboard is corr ectly connected t o the computer and that no keys ar e held pressed during the POST . T o purposely congure[...]
-
Page 71
Error code POST error message Description/Action 1820 More than one e xternal ngerprint reader is attached. P ower off and remove all but the reader that you set up within your main oper ating system. If more than one e xternal ngerprint reader is connected to a computer , this error message will be displayed to inform you to r emove all of t[...]
-
Page 72
Message/Symptom FRU/Action Incorrect memory size during POST 1. Run the Memory t ests 2. Memory Module 3. System Board "Insert a Diskette" icon appears with a known-good diagnostics diskette in the rst 3.5-inch diskett e drive. 1. System Board 2. Diskette Drive Cable 3. Network Adapt er Intensity or color varies fr om left t o right of[...]
-
Page 73
e. External Cache f. Ext ernal Cache RAM g. Hard disk drive h. Diskett e drive 3. T urn on the power and the comput er to r e-test the system. 4. Repeat steps 1 thr ough 3 until you nd the failing device or adapter car ds. If all devices and adapt er car ds have been r emoved, and the pr oblem continues, replace the system boar d. See “Replaci[...]
-
Page 74
68 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 75
Chapter 8. Replacing FRUs This chapt er provides step-by-st ep instructions for replacing major FRUs. Important Be sur e to r ead and understand the Chapter 2 “Safety information” on page 3 before replacing any FRU . These pr ecautions and guidelines will help you work safely . FRU r eplacements are to be done only by tr ained service technicia[...]
-
Page 76
Locating connect ors on the rear of your comput er Figure 2 “Rear connect or locations” on page 70 shows the locations of the connectors on the r ear of your computer . Some connectors on the rear of your comput er ar e color -coded to help you det ermine wher e to connect the cables on your computer . Figure 2. Rear connector locations 1 VGA m[...]
-
Page 77
Locating components Figure 3 “Component locations” on page 71 shows the locations of the various components in your computer . T o open the comput er cover , see “Opening the comput er cover” on page 72. Figure 3. Component locations 1 Optical drive 7 Micr oprocessor 2 F r ont be zel 8 Memory module 3 Hard disk drive 9 Battery 4 Power adapt[...]
-
Page 78
Figure 4. System board part locations 1 Thermal sensor connector 10 PS/2 keyboar d and mouse connector 2 Memory slots (2) 11 F r ont USB connect or 2 (for connecting additional USB devices) 3 Battery 12 Cover presence switch connector (Intrusion switch connector) 4 Microprocessor fan connector 13 PCI card slot 5 Clear CMOS (Complementary Metal Oxid[...]
-
Page 79
CA UTION: T urn off the computer and wait three to ve minut es to let the computer cool before opening the computer cover . T o open the comput er cover , do the following: 1. Remove all media fr om the drives. Then, turn off all attached devices and the comput er . 2. Disconnect all power cor ds from electrical outlets. 3. Disconnect the power [...]
-
Page 80
3. Remove the front bez el by r eleasing the two plastic tabs and pivoting the fr ont bez el outward. Figure 6. Removing the fr ont bezel 4. T o reinstall the front bezel, align the plastic tabs on the bott om of the bez el with the corr esponding holes in the chassis, and then pivot the fr ont bez el inwar d until it snaps into position. 5. Go t o[...]
-
Page 81
4. Open the r etaining clips. If you are r eplacing an old memory module, open the retaining clips and remove the memory module being r eplaced as shown. Figure 7. Removing the memory module 5. Insert the notched end 2 of the new memory module into the slot 1 . Pr ess the memory module rmly and pivot the memory module until it snaps into place. [...]
-
Page 82
2. Open the comput er cover . See “Opening the computer cover ” on page 72. 3. L ocate the syst em board and disconnect all cables connected to the system boar d. See “L ocating parts on the system board” on page 71. 4. P ress inward on the two side tabs and then pivot the system boar d to release it fr om the chassis. Figure 9. Releasing t[...]
-
Page 83
10. Install the new PCI car d int o the PCI card slot. Make sure that the PCI card is rmly x ed in the slot and does not move easily . 11. Close the PCI card retainer . 12. Slide the system board to the rear of the chassis and then pivot the system board until it snaps int o position. 13. Reconnect all cables that were disconnected from the s[...]
-
Page 84
7. T o install the new har d disk drive int o the br acket, e x the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the br acket with the corr esponding holes in the har d disk drive. Do not touch the circuit board 5 on the bott om of the hard disk drive. Figure 12. Installing the hard disk drive int o the brack et 8. Connect the signal c[...]
-
Page 85
5. P ress the blue r elease butt on and slide the optical drive out the front of the comput er . Figure 13. Removing the optical drive 6. Install the optical drive r etainer 1 on the side of the new optical drive. Figure 14. Installing the retainer on the optical drive 7. Slide the new optical drive into the drive bay until it snaps into position. [...]
-
Page 86
Replacing the batt er y Attention: Do not open your computer or attempt any r epair before reading and understanding the “Important safety information” in the ThinkCentre User Guide . T o obtain a copy of the ThinkCentre User Guide , go t o: http://www.lenovo.com/ThinkCentreUserGuides Y our comput er has a special type of memory that maintains [...]
-
Page 87
7. T urn on the computer and all attached devices. 8. Use the Setup Utility pr ogram to set the dat e, time, and any passwords. See Chapter 6 “Using the Setup Utility progr am” on page 41. Replacing the heat sink Attention: Do not open your computer or attempt any r epair before reading and understanding the “Important safety information” i[...]
-
Page 88
4. F ollow this sequence to r emove the four scr ews that secur e the heat sink t o the syst em boar d: a. Partially r emove scr ew 1 , then fully remove scr ew 2 , and then fully remove screw 1 . b. P artially remove screw 3 , then fully remove screw 4 , and then fully r emove scr ew 3 . Note: Car efully r emove the four scr ews from the syst em b[...]
-
Page 89
This section provides instructions on how t o replace the micr oprocessor . CA UTION: The heat sink and microprocessor might be very hot. T urn off the comput er and wait three t o ve minutes t o let the computer cool before removing the computer cover . T o r eplace the micropr ocessor , do the following: 1. Remove all media fr om the drives an[...]
-
Page 90
7. Lift the small handle 1 and open the retainer 2 t o access the micropr ocessor 3 . Figure 20. Accessing the microprocessor 8. Lift the micr oprocessor str aight up and out of the micr oprocessor socket. Figure 21. Removing the microprocessor Notes: a. Y our micropr ocessor and socket might look differ ent fr om the one illustr ated. 84 ThinkCent[...]
-
Page 91
b. Not e the orientation of the micropr ocessor in the sock et. Y ou can either look for the small triangle 1 on one corner of the micr oprocessor or not e the orientation of the notches 2 on the micropr ocessor . This is important when installing the new micr oprocessor on the syst em boar d. c. T ouch only the edges of the micropr ocessor . Do no[...]
-
Page 92
16. Reconnect all cables that were disconnected from the system board. 17. Go t o “Completing the parts r eplacement” on page 98. Replacing the system boar d Attention: Do not open your computer or attempt any r epair before reading and understanding the “Important safety information” in the ThinkCentre User Guide . T o obtain a copy of the[...]
-
Page 93
10. Lift the failing system boar d off the cover . 11. P osition the new system boar d so that the scr ew holes are aligned with the mounting studs on the cover . 12. Install the scr ews to secure the new system board to the pr otective cover . 13. Install the memory modules, PCI car d, battery, and micr oprocessor that you r emoved fr om the faili[...]
-
Page 94
Figure 23. Installing the socket cover Note: Y our micr oprocessor socket and cover might look slightly differ ent from the illustr ation. 5. Car efully press the other side of the socket cover downwards until the socket cover snaps int o place. Figure 24. Securing the socket cover 6. Car efully check the four corners of the socket cover t o make s[...]
-
Page 95
T o r eplace the system fan assembly, do the following: 1. Remove all media fr om the drives and turn off all attached devices and the comput er . Then, disconnect all power cords fr om electrical outlets and disconnect all cables that are connect ed t o the computer . 2. Open the comput er cover . See “Opening the computer cover ” on page 72. [...]
-
Page 96
7. P ull and lift the syst em fan assembly out of the chassis. Figure 26. Removing the system fan assembly 8. When installing your new system fan assembly, use the new rubber mounts that come with the new system fan. 9. Install the two short rubber mounts in the new system fan assembly as shown. 10. Install the two long rubber mounts into the r ear[...]
-
Page 97
11. T o install the new system fan assembly into the chassis, align the other two holes in the system fan assembly with the long rubber mounts in the chassis. Pull the rubber mounts thr ough the holes in the system fan assembly until the system fan is in place. Figure 27. Installing the system fan assembly 12. Slide the system board to the rear of [...]
-
Page 98
5. P ress the internal speaker lock latch 1 , slide the internal speaker downwards to r emove it fr om the chassis. Figure 28. Removing the internal speaker 6. P osition the new int ernal speaker into the metal clips 2 and push the internal speaker upwar ds until it is secured by the lock latch 1 . 7. Connect the new int ernal speaker cable to the [...]
-
Page 99
5. Remove the screw that secures the fr ont audio and USB assembly bracket to the chassis. Figure 29. Removing the screw that secures the front audio and USB assembly to the chassis 6. L ocate the power switch assembly beside the fr ont audio and USB assembly . Remove the power switch assembly by releasing tab 1 and tab 2 that secur e the power swi[...]
-
Page 100
7. Completely r emove the front audio and USB assembly bracket from the chassis. 8. Remove the two scr ews that secure the fr ont audio and USB assembly to its brack et and remove the failing front audio and USB assembly from the bracket. 9. Install a new front audio and USB assembly int o the bracket and install the two scr ews t o secure the fron[...]
-
Page 101
1. Remove all media fr om the drives and turn off all attached devices and the comput er . Then, disconnect all power cords fr om electrical outlets and disconnect all cables that are connect ed t o the computer . 2. Disconnect the power cord fr om the electrical outlet. 3. Disconnect the ac power adapter from the ac power adapt er connector on the[...]
-
Page 102
4. P ress the metal clip 1 as shown and then lift the power adapter br acket up to r emove it from the chassis. Figure 33. Removing the ac power adapter bracket 5. Slide the ac power adapt er out of the brack et. 96 ThinkCentre Hardwar e Maint enance Manual[...]
-
Page 103
6. Install the ac power adapt er into the new power adapter bracket as shown. Figure 34. Installing the ac power adapter int o the new bracket 7. Insert the two tabs 1 and the tab 2 on the new power adapter br acket int o the corr esponding holes in the chassis, and then pr ess the new br acket downward to secur e the br acket to the chassis. Figur[...]
-
Page 104
Completing the parts replacement After completing the installation or r eplacement for all parts, you need t o close the computer cover and reconnect cables. Depending on the parts you installed or replaced, you might need to conrm the updat ed information in the Setup Utility progr am. Refer t o Chapter 6 “Using the Setup Utility pr ogram” [...]
-
Page 105
Chapter 9. FRU lists This chapt er lists the information on the eld r eplaceable units (FRUs). Attention: Be sure to r ead and understand all the safety information before r eplacing any FRUs. Note: In the following tables, a customer replaceable unit (CRU) is identied as either "1", "2", or "N" in the CRU column[...]
-
Page 106
Item # FRUs FRU # CRU 1 Optical drive, DVD-ROM Drive - 16x/48x - SA T A • MT 0266: A1H A1V A3A A3T C2J C4J C6J A5G A6G B3G D4J D6J • MT 0384: A1G A2G • MT 4168: • MT 5067: A3V • MT 7516: B5M A1H A1V B8J C1J A5G A6G B3G C6J • MT 7519: A7V 71Y5543 1 1 Optical drive, DVD Recor der Rambo 8 - SA T A 12XRAM write • MT 0266: B6M B7U B7F B7S [...]
-
Page 107
Item # FRUs FRU # CRU 3 Hard disk drive, SA T A 320GB 7200 RPM/3Gb/8M • MT 0266: B6M B7U B7F B7S B7M A4A A4T C8G C2J C3J C4J C5J C6J C7J B9G C1G D4J D5J D6J D7J D8J • MT 0384: A7G A8G • MT 4168: A1G • MT 5067: A3V A3U A3F A3S A3P A3L A3D A3Y A3G A3M A3A A3Q A3T A3C A3B A3H A3R A3E A3J • MT 7516: B5M A4A A4T B7G C5U C5F C5S C3J C4J C8J C9J[...]
-
Page 108
Item # FRUs FRU # CRU 3 Hard disk drive, SA T AIII 250GB 7200RPM/6Gb/16M • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: A3A A3T B8J B9J C1J C2J A5G A6G A7G A8G C6J C7J • MT 7519: A1A A1T 03T7039 1 3 Hard disk drive, SA T AIII 320GB 7200RPM/6Gb/16M • MT 0266: B6M B7U B7F B7S B7M A4A A4T C8G C2J C3J C4J C5J C6J C7J B9G C1G D4J D[...]
-
Page 109
Item # FRUs FRU # CRU 3 Hard disk drive, 2.5 inch 300G 10K RPM HDD • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 91Y1657 1 4 P ower supply, 150W power adapt er • MT 0266: B6M B7U B7F B7S B7M B8U B8F B8S B8M A1H A1V A2H A2V A3A A3T A4A A4T B4S B4D B4Y B5S B5D B5Y C8G C9G C2J C3J C4J C5J C6J C7J B9G C1G A5G A6G A7G A[...]
-
Page 110
Item # FRUs FRU # CRU 7 Micropr ocessor , Ci3 2100 Sandy Bridge stepping Q0 3MB 2c FCL GA 3.1GHZ 65W • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: B5M B6M A1H A1V A2H A2V A3A A3T A4A A4T B4S B4D B4Y B8J B9J C1J C2J B7G A5G A6G A7G A8G A9G B1G B2G B3G C5U C5F C5S C3J C4J C6J C7J C8J C9J • MT 7519: A1A A1T A2G A4G 03T8011 N 7 Mic[...]
-
Page 111
Item # FRUs FRU # CRU 7 Micropr ocessor , Ci5 2400S Sandy Bridge st epping D2 6MB 4c FCL GA 2.5GHZ 65W vP ro • MT 0266: B6M B7U B7F B7S B7M B8U B8F B8S B8M A1H A1V A2H A2V A3A A3T A4A A4T B4S B4D B4Y B5S B5D B5Y C8G C9G C2J C3J C4J C5J C6J C7J B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D1U D1F D1S D2G D7J D8J • MT 0384: A9G A7G A8G A1G A2G A3G A4G[...]
-
Page 112
Item # FRUs FRU # CRU 7 Micropr ocessor , Cor e i3-2125 Sandy Bridge , 3MB 2C/4T 3.30 GHz, 65W • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T8357 N 7 Micropr ocessor , Cor e i3-2130 Sandy Bridge , 3MB 2C/4T 3.40 GHz, 65W • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T8358 N 7 Micr[...]
-
Page 113
Item # FRUs FRU # CRU 8 Memory module, 1GB PC3-10600 1333MHz DDR3 SoDIMM • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 64Y6650 1 8 Memory module, 2GB PC3-10600 1333MHz DDR3 SoDIMM • MT 0266: A1H A1V A2H A2V A3A A3T A4A A4T B4S B4D B4Y B5S B5D B5Y C8G C9G C2J C3J C4J C5J B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G D[...]
-
Page 114
Item # FRUs FRU # CRU • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: • MT 7519: Mechanical FRUs Mechanical FRUs FRU # CRU FRU, 4.8L Intel 65W thermal kit • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: all models • MT 7519: all models 03T7055 2 FRU, power cable for ODD&HDD_R_1[...]
-
Page 115
Mechanical FRUs FRU # CRU FRU, F ront I/O cable_NC_ESD_R(4.8L_PCBA_A350_U350_FP430) • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: all models • MT 7519: all models 45J9567 2 FRU, second serial port cable 250mm (with level shift IC) • MT 0266: all models • MT 0384: all models • MT[...]
-
Page 116
Mechanical FRUs FRU # CRU FRU, PS2 cable (170mm) • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: all models • MT 7519: all models 43N9149 2 FRU, ODD blank bezel, plastic, without ODD • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7[...]
-
Page 117
Mechanical FRUs FRU # CRU FRU, car d reader cover br acket, assembly • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: all models • MT 7519: all models 45K6213 1 FRU, blank cover without media card r eader • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067[...]
-
Page 118
Mechanical FRUs FRU # CRU FRU, universal adapt er bracket 5.25 t o 3.5 • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: all models • MT 7519: all models 45K6209 2 FRU, access cover assembly • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models ?[...]
-
Page 119
Mechanical FRUs FRU # CRU FRU, syst em boar d tr ay assembly • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: all models • MT 7519: all models 45K6220 2 FRU, C2 switch assembly • MT 0266: all models • MT 0384: all models • MT 4168: all models • MT 5067: all models • MT 7516: al[...]
-
Page 120
Keyboard - P referred P ro USB K eyboard FRU # CRU A/F • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5291 1 B/F • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G ?[...]
-
Page 121
Keyboard - P referred P ro USB K eyboard FRU # CRU Chinese/US • MT 0266: A1V A2V • MT 0384: • MT 4168: • MT 5067: A1B A1V A3V • MT 7516: A1V A2V • MT 7519: A7V A8V 41A5296 1 Czech (ABB) • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G [...]
-
Page 122
Keyboard - P referred P ro USB K eyboard FRU # CRU F rench Canadian • MT 0266: B7F B8F D1F D3F • MT 0384: • MT 4168: • MT 5067: A2F A1F A3F • MT 7516: C5F • MT 7519: 41A5301 1 F rench Canadian • MT 0266: B7F B8F D1F D3F • MT 0384: • MT 4168: • MT 5067: A2F A1F A3F • MT 7516: C5F • MT 7519: 41A5302 1 German • MT 0266: C8G C[...]
-
Page 123
Keyboard - P referred P ro USB K eyboard FRU # CRU Hebrew • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 41A5306 1 Hungarian • MT 0266: C8G C9G B9G C1G A5G A6G A[...]
-
Page 124
Keyboard - P referred P ro USB K eyboard FRU # CRU Kor ean • MT 0266: • MT 0384: • MT 4168: • MT 5067: A1K • MT 7516: • MT 7519: 41A5311 1 LA Spanish • MT 0266: B7S B8S B4S B4D B4Y B5S B5D B5Y D1S D3S • MT 0384: • MT 4168: • MT 5067: A2S A2D A2Y A1S A1D A1Y A3S A3D A3Y • MT 7516: B4S B4D B4Y C5S • MT 7519: 41A5312 1 Norwegia[...]
-
Page 125
Keyboard - P referred P ro USB K eyboard FRU # CRU Romanian • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 41A5317 1 Romanian • MT 0266: C8G C9G B9G C1G A5G A6G [...]
-
Page 126
Keyboard - P referred P ro USB K eyboard FRU # CRU Spanish • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 41A5321 1 Swedish/Finnish • MT 0266: C8G C9G B9G C1G A5[...]
-
Page 127
Keyboard - P referred P ro USB K eyboard FRU # CRU T urkish • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 41A5326 1 UK English • MT 0266: C8G C9G B9G C1G A5G A6[...]
-
Page 128
Keyboard - P referred P ro USB K eyboard FRU # CRU Lithuanian • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 45J4896 1 India • MT 0266: • MT 0384: • MT 4168:[...]
-
Page 129
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--B/F • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5042 1 PS/2--Belgium English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5043 1 PS/2--Brazilian P ortuguese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7[...]
-
Page 130
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--Czech (ABB) • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5047 1 PS/2--Danish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5048 1 PS/2--Dutch • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519:[...]
-
Page 131
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--F rench Canadian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5052 1 PS/2--German • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5053 1 PS/2--Greek • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT [...]
-
Page 132
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--Hungarian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5056 1 PS/2--Iceland • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5057 1 PS/2--Italy • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: [...]
-
Page 133
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--LA Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5061 1 PS/2--Norwegian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5062 1 PS/2--P olish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7[...]
-
Page 134
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--Russian/Cyrillic • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5066 1 PS/2--Serbian/Cyrillic • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5067 1 PS/2--Slovak • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 75[...]
-
Page 135
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--SF/G • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5071 1 PS/2-- Thailand • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5072 1 PS/2-- T urkish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519:[...]
-
Page 136
Keyboard - P referred Pr o F ull Siz e PS/2 FRU # CRU PS/2--US Eur opean • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5076 1 PS/2--Slovenian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5077 1 PS/2--India • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7[...]
-
Page 137
Keyboard - Fingerprint FRU # CRU A/F • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4782 1 Belgium F r ench • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4783 1 Belgium English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4784 1 Brazilian P ortu[...]
-
Page 138
Keyboard - Fingerprint FRU # CRU Chinese/US • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4787 1 Czech (ABB) • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4788 1 Danish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4789 1 Dutch • MT 0266: • [...]
-
Page 139
Keyboard - Fingerprint FRU # CRU F rench Canadian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4792 1 F rench Canadian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4793 1 German • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4794 1 Greek • MT[...]
-
Page 140
Keyboard - Fingerprint FRU # CRU Hebrew • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4797 1 Hungarian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4798 1 Iceland • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4799 1 Italy • MT 0266: • MT 03[...]
-
Page 141
Keyboard - Fingerprint FRU # CRU Kor ean • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4802 1 LA Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4803 1 Norwegian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4804 1 P olish • MT 0266: •[...]
-
Page 142
Keyboard - Fingerprint FRU # CRU Romanian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4807 1 Romanian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4808 1 Russian/Cyrillic • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4809 1 Serbian/Cyrillic ?[...]
-
Page 143
Keyboard - Fingerprint FRU # CRU Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4812 1 Swedish/Finnish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4813 1 Swiss F r ench/German • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4814 1 Thailan[...]
-
Page 144
Keyboard - Fingerprint FRU # CRU T urkish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4817 1 UK English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4818 1 US Eur opean • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 57Y4819 1 Slovenian • MT 026[...]
-
Page 145
Keyboard - Fingerprint FRU # CRU Arabic • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8002 1 A/F • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8003 1 Belgium F r ench • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8004 1 Belgium English • MT 02[...]
-
Page 146
Keyboard - Fingerprint FRU # CRU Bulgarian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8007 1 Chinese/US • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8008 1 Czech (ABB) • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8009 1 Danish • MT 0266: [...]
-
Page 147
Keyboard - Fingerprint FRU # CRU F rench • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8012 1 F rench Canadian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8013 1 F rench Canadian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8014 1 German • [...]
-
Page 148
Keyboard - Fingerprint FRU # CRU Greek/US • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8017 1 Hebrew • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8018 1 Hungarian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8019 1 Iceland • MT 0266: • MT[...]
-
Page 149
Keyboard - Fingerprint FRU # CRU Japanese • MT 0266: C4J C5J C6J C7J D8J • MT 0384: • MT 4168: • MT 5067: • MT 7516: C3J C4J C8J C9J • MT 7519: 03X8022 1 Kor ean • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8023 1 LA Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519:[...]
-
Page 150
Keyboard - Fingerprint FRU # CRU P ortuguese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8027 1 Romanian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8038 1 Romanian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8039 1 Russian/Cyrillic • MT[...]
-
Page 151
Keyboard - Fingerprint FRU # CRU Slovak • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8029 1 Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8030 1 Swedish/Finnish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8031 1 Swiss F r ench/German [...]
-
Page 152
Keyboard - Fingerprint FRU # CRU T urkish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8041 1 T urkish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8034 1 UK English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03X8035 1 US Eur opean • MT 0266[...]
-
Page 153
Mice FRU # CRU Lenovo enhanced optical USB mouse • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 45J4889 1 Optical wheel mouse PS/2 • MT 0266: B6M B7U B7F B7S B7M B8U B8F B8S B8M A1H A1V A2H A2V A3A A3T A4A A4T B4S B4D B4Y B5S B5D B5Y C8G C9G C2J C3J C4J C5J C6J C7J B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D1U D1F D1S[...]
-
Page 154
Adapters and miscellaneous FRUs FRU # CRU Lenovo br anded speakers • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 41A5334 1 Speaker power brick • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 89P8571 1 Thermal gr ease syringe • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516[...]
-
Page 155
P ower Cor ds P ower Cords FRU # CRU Line Cor d - US • MT 0266: B7U B7F B7S B8U B8F B8S A3A A3T A4A A4T B4S B4D B5S B5D D1U D1F D1S D3U D3F D3S • MT 0384: • MT 4168: • MT 5067: A2U A2F A2S A2L A2D A1U A1F A1S A1L A1D A1A A1T A3U A3F A3S A3L A3D A3A A3T • MT 7516: A3A A3T A4A A4T B4S B4D C5U C5F C5S • MT 7519: A1A A1T 41R3184 1 Line Cor [...]
-
Page 156
P ower Cords FRU # CRU Line Cord - Singapore, Malaysia, Brunei, Hong Kong • MT 0266: A1H A2H A3A A4A C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A1A A1B A1H A3G A3A A3B A3H • MT 7516: A1H A2H A3A A4A B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A1A A2[...]
-
Page 157
P ower Cords FRU # CRU Line Cor d - Japan • MT 0266: C2J C3J C4J C5J C6J C7J D4J D5J D6J D7J D8J • MT 0384: • MT 4168: • MT 5067: A1J A1E A3J A3E • MT 7516: B8J B9J C1J C2J C3J C4J C6J C7J C8J C9J • MT 7519: 41R3248 1 Line Cor d - Italy • MT 0266: B4S B4Y B5S B5Y D1S D3S • MT 0384: • MT 4168: • MT 5067: A2S A2Y A1S A1Y A3S A3Y ?[...]
-
Page 158
P ower Cords FRU # CRU Line Cor d - Israel • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1G A3G • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 41R3236 1 Line Cor d - A models • MT 0266: A3A A4A • MT 0384: • MT [...]
-
Page 159
P ower Cords FRU # CRU Line Cor d - China • MT 0266: • MT 0384: • MT 4168: • MT 5067: A1M A3M • MT 7516: • MT 7519: 41R3257 1 Line Cord - Brazil (P ortuguese) • MT 0266: • MT 0384: • MT 4168: • MT 5067: A2P A1P A3P • MT 7516: • MT 7519: 41R3271 1 Line Cord - LA High V olt (APU) • MT 0266: B4Y B5Y • MT 0384: • MT 4168: [...]
-
Page 160
P ower Cords FRU # CRU Line Cor d - South Africa • MT 0266: B6M B7M B8M A3A A4A C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1V A3V • MT 7516: B5M B6M A3A A4A B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A1A A2G A3G A4G A5G A6G 41R3221 1 Line Cor d - Indi[...]
-
Page 161
P ower Cords FRU # CRU Line Cor d - UK Ireland • MT 0266: • MT 0384: • MT 4168: • MT 5067: A2S A2Y A1S A1Y A3S A3Y • MT 7516: • MT 7519: 41R3225 1 Line Cor d - Italy • MT 0266: B4S B4Y B5S B5Y D1S D3S • MT 0384: • MT 4168: • MT 5067: • MT 7516: B4S B4Y B7G A5G A6G A7G A8G A9G B1G B2G B3G C5S • MT 7519: 41R3233 1 Line Cor d -[...]
-
Page 162
P ower Cords FRU # CRU Line Cor d - Israel • MT 0266: C8G C9G B9G C1G A5G A6G A7G A8G A9G B1G B2G B3G D2G • MT 0384: A9G A7G A8G A1G A2G A3G A4G A5G A6G • MT 4168: A1G • MT 5067: A1A A3A • MT 7516: B7G A5G A6G A7G A8G A9G B1G B2G B3G • MT 7519: A2G A3G A4G A5G A6G 41R3237 1 Line Cord - Austria, Belgium, Cr oatia, Cz echoslovakia, Finlan[...]
-
Page 163
Windows 7 P rofessional 32 FRU # CRU Simplied Chinese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0858 1 Chinese- T raditional • MT 0266: A1V A2V • MT 0384: • MT 4168: • MT 5067: A1B A1V A3V • MT 7516: A1V A2V • MT 7519: A7V A8V 03T0859 1 Czech • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168[...]
-
Page 164
Windows 7 P rofessional 32 FRU # CRU Greek • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168: • MT 5067: A1G • MT 7516: B7G • MT 7519: A4G A5G A6G 03T0863 1 German • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168: • MT 5067: A1G • MT 7516: B7G • MT 7519: A4G A5G A6G 03T0864 1 Hebrew • MT 0266: B9G C1G • MT 0384: A7G A8G •[...]
-
Page 165
Windows 7 P rofessional 32 FRU # CRU Italian • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168: • MT 5067: A1G • MT 7516: B7G • MT 7519: A4G A5G A6G 03T0868 1 Japanese • MT 0266: C2J C3J C4J C5J D6J D7J D8J • MT 0384: • MT 4168: • MT 5067: A1J • MT 7516: B8J B9J C1J C2J C3J C4J C6J C7J C8J C9J • MT 7519: 03T0869 1 Kor ean • [...]
-
Page 166
Windows 7 P rofessional 32 FRU # CRU Romanian • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168: • MT 5067: A1G • MT 7516: B7G • MT 7519: A4G A5G A6G 03T0873 1 Russian • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168: • MT 5067: A1G • MT 7516: B7G • MT 7519: A4G A5G A6G 03T0874 1 Slovakian • MT 0266: B9G C1G • MT 0384: A7G [...]
-
Page 167
Windows 7 P rofessional 32 FRU # CRU T urkish • MT 0266: B9G C1G • MT 0384: A7G A8G • MT 4168: • MT 5067: A1G • MT 7516: B7G • MT 7519: A4G A5G A6G 03T0878 1 English • MT 0266: A1H A2H A3A A4A • MT 0384: • MT 4168: • MT 5067: A1U A1L A1M A1A A1Q A1H A1R A1E • MT 7516: A1H A2H A3A A4A • MT 7519: A1A A1T A4G A5G A6G 03T0879 1 [...]
-
Page 168
Windows 7 Home Basic 32 Recovery CD Windows 7 Home Basic 32 FRU # CRU Arabic • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0883 1 Brazilian P ortuguese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0884 1 Chinese-simplied • MT 0266: • MT 0384: • MT 4168: • MT 5067: •[...]
-
Page 169
Windows 7 Home Basic 32 FRU # CRU Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0888 1 Serbian-Latin • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0889 1 T urkish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0890 1 English • MT 0266: [...]
-
Page 170
Windows 7 Home P remium 64 FRU # CRU • MT 4168: • MT 5067: • MT 7516: • MT 7519: Windows 7 Home P remium 32 Recovery CD Windows 7 Home P remium 32 FRU # CRU Brazilian P ortuguese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0919 1 Chinese-Simplied • MT 0266: • MT 0384: • MT 4168: • MT 5067: •[...]
-
Page 171
Windows 7 Home P remium 32 FRU # CRU India English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0923 1 F rench • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0924 1 Hong K ong • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0925 1 Italy • MT 026[...]
-
Page 172
Windows 7 Home P remium 32 FRU # CRU Kor ean • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0928 1 Spanish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0929 1 US English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0930 1 C&L Nordics (DK/FI[...]
-
Page 173
Windows XP P rofessional 32 Recovery CD Windows XP Professional 32 FRU # CRU Japanese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0501 1 English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0502 1 Brazil P ortuguese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 75[...]
-
Page 174
Windows XP Professional 32 FRU # CRU Denmark • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0726 1 Finnish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0727 1 F rench • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0737 1 German • MT 0266: • M[...]
-
Page 175
Windows XP Professional 32 FRU # CRU Italian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0730 1 Norwegian • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0731 1 P olish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0732 1 Russian • MT 0266: ?[...]
-
Page 176
Windows XP Professional 32 FRU # CRU Swedish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0735 1 T urkish • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T0736 1 Windows 7 P rofessional 64 Recovery CD Windows 7 P rofessional 64 FRU # CRU Arabic • MT 0266: D2G • MT 0384: • MT [...]
-
Page 177
Windows 7 P rofessional 64 FRU # CRU Chinese- T raditional • MT 0266: • MT 0384: • MT 4168: • MT 5067: A3V • MT 7516: • MT 7519: 03T0897 1 Czech • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0898 1 India English • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3Q • MT 7516: ?[...]
-
Page 178
Windows 7 P rofessional 64 FRU # CRU German • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0902 1 Hebrew • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0903 1 Hong K ong • MT 0266: • MT 0384: • MT 4168: • MT 5067: A3B • MT 7516: • MT 7519[...]
-
Page 179
Windows 7 P rofessional 64 FRU # CRU Japanese • MT 0266: D4J D5J • MT 0384: • MT 4168: • MT 5067: A3J • MT 7516: • MT 7519: 03T0907 1 P olish • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0908 1 P ortuguese • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT [...]
-
Page 180
Windows 7 P rofessional 64 FRU # CRU Spanish • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0912 1 Sebian-Latin • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0913 1 T urkish • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: ?[...]
-
Page 181
Windows 7 P rofessional 64 FRU # CRU C&L EMEA (NL/FR/GR/IT/EN) • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0917 1 C&L Cr oatian (EN/SL/CR) • MT 0266: D2G • MT 0384: • MT 4168: • MT 5067: A3G • MT 7516: • MT 7519: A2G A3G 03T0918 1 Windows XP P rofessional Generic Recovery CD W[...]
-
Page 182
Windows XP Professional Generic FRU # CRU Kor ean • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03W7489 1 Dutch • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03W7490 1 P ortuguese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03W7493 1 Windows Vista Busi[...]
-
Page 183
Windows Vista Home Basic 32 Recovery CD Windows Vista Home Basic 32 FRU # CRU India English • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T1313 1 F rench • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T1314 1 Japanese • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: [...]
-
Page 184
Windows Vista Home Basic 32 FRU # CRU C&L1 Nordics: DK/FI/SV/NO/EN • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T1318 1 C&L2 EMEA: NL/FR/GR/IT/EN • MT 0266: • MT 0384: • MT 4168: • MT 5067: • MT 7516: • MT 7519: 03T1319 1 178 ThinkCentre Hardwar e Maintenance Manual[...]
-
Page 185
Chapter 10. Additional service information This chapter provides additional information that the service r epresentative might nd helpful. Security featur es Security features in this section include the following: • P asswords • Vital Product Data • Secure Managed Client (some models) Hardware-contr olled passwords Use the Setup Utility p[...]
-
Page 186
3. L evels 1 and 2 Support T o update (ash) the BIOS, see “Updating (ashing) the BIOS from a disc” on page 180. Updating (ashing) the BIOS from a disc This section pr ovides instructions on how to update (ash) the BIOS from a disc. Note: Y ou can download a self-starting bootable disc image (known as an ISO image) with the system pr[...]
-
Page 187
Recovering fr om a POS T/BIOS updat e failure If the power to your comput er is interrupt ed while the POS T and BIOS is being updat ed, your comput er might not r estart corr ectly . If this happens, perform the following pr ocedure to r ecover fr om the POS T and BIOS updat e failur e. This procedur e is commonly called Boot-block Recovery . 1. R[...]
-
Page 188
182 ThinkCentre Hardwar e Maintenance Manual[...]
-
Page 189
Appendix A. Notices Lenovo may not offer the products, services, or featur es discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any r eference to a L enovo pr oduct, progr am, or service is not intended to stat e or imply that only t[...]
-
Page 190
T elevision output notice The following notice applies to models that have the factory-installed television-output feature. This product incorporat es copyright pr otection technology that is pr otected by method claims of certain U .S. patents and other intellectual property rights owned by Macrovision Corpor ation and other rights owners. Use of [...]
-
Page 191
Inde x A Administrat or, passwor d 42 B battery, r eplacing 80 boot-block recovery 181 C cables, connecting 98 changing password 42 startup device sequence 44 CMOS, clearing 43 components, int ernal 71 computer cover opening 73 connectors rear 70 connectors, controls, indicat ors front 69 considerations, passwords 42 CRU completing the installation[...]
-
Page 192
micropr ocessor 82 S security enabling or disabling 43 selecting startup device 44 tempor ary startup device 44 setting password 42 settings changing 41 viewing 41 Setup Utility 41 Setup Utility progr am, starting 41 Setup Utility, exiting 45 starting the Setup Utility pr ogram 41 startup device 44 sequence, changing 44 tempor ary, selecting 44 sys[...]
-
Page 193
[...]
-
Page 194
Part Number: 0A74394 Printed in USA (1P) P/N: 0A74394 *0A74394*[...]