Lenovo X200 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 182 pages
- 7.51 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Laptop
Lenovo 8705
96 pages 1.65 mb -
Laptop
Lenovo T61
84 pages 1.21 mb -
Laptop
Lenovo 10059/7723
33 pages 3.43 mb -
Laptop
Lenovo U410 Touch
52 pages 4.18 mb -
Laptop
Lenovo R500
2 pages 0.64 mb -
Laptop
Lenovo E50
196 pages 6.9 mb -
Laptop
Lenovo 3000 C Series
2 pages 0.75 mb -
Laptop
Lenovo Y560
103 pages 6.23 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Lenovo X200. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Lenovo X200 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Lenovo X200 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Lenovo X200 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Lenovo X200
- nom du fabricant et année de fabrication Lenovo X200
- instructions d'utilisation, de réglage et d’entretien de l'équipement Lenovo X200
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Lenovo X200 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Lenovo X200 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Lenovo en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Lenovo X200, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Lenovo X200, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Lenovo X200. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
T hinkP a d ® X2 00 Ta b l e t Hard w ar e M a in t e n a n c e Ma nu a l[...]
-
Page 2
[...]
-
Page 3
T hinkP a d ® X2 00 Ta b l e t Hard w ar e M ain t e n an c e Ma nu a l[...]
-
Page 4
Note Before using this information and the pr oduct it supports, be sure to read the general information under “Notices” on page 171. Second Edition (November 2008) © Copyright Lenovo 2008. All rights reserved. LENOVO products, data, computer softwar e, and services have been developed exclusively at private expense and are sold to governmenta[...]
-
Page 5
Contents About this manual . . . . . . . . . .v Safety information . . . . . . . . . .1 General safety . . . . . . . . . . . . . .2 Electrical safety . . . . . . . . . . . . .3 Safety inspection guide . . . . . . . . . . .5 Handling devices that are sensitive to electr ostatic discharge . . . . . . . . . . . . . . .6 Grounding r equirements . . . .[...]
-
Page 6
Parts list . . . . . . . . . . . . . . . 139 Overall . . . . . . . . . . . . . . 140 LCD FRUs . . . . . . . . . . . . . 154 Keyboard . . . . . . . . . . . . . . 161 Miscellaneous parts . . . . . . . . . . 162 AC adapters . . . . . . . . . . . . . 163 Power cords . . . . . . . . . . . . . 164 Recovery discs . . . . . . . . . . . . 165 Common service[...]
-
Page 7
About this manual This manual contains service and refer ence information for the following ThinkPad ® products. ThinkPad X200 T ablet MT 4184, 7448, 7449, 7450, 7453, 2263, and 2266 Use this manual along with the advanced diagnostic tests to troubleshoot problems. The manual is divided into sections as follows: v The common sections provide gener[...]
-
Page 8
vi ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 9
Safety information This chapter presents following safety information that you need to be familiar with before you service a ThinkPad computer . v “General safety” on page 2 v “Electrical safety” on page 3 v “Safety inspection guide” on page 5 v “Handling devices that are sensitive to electr ostatic discharge” on page 6 v “Groundi[...]
-
Page 10
General safety Follow these rules to ensur e general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenl[...]
-
Page 11
Electrical safety Observe the following rules when working on electrical equipment. v Find the room emer gency power-of f (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly . v Do not work alone under hazardous conditions or near equipment that[...]
-
Page 12
v Do not touch live electrical circuits with the r eflective surface of a plastic dental mirror . The surface is conductive; such touching can cause personal injury and machine damage. v Do not service the following parts with the power on when they are r emoved from their normal operating places in a machine: – Power supply units – Pumps – B[...]
-
Page 13
Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, requir ed safety items were installed to pr otect users and service personnel from injury . This guide addresses only those items. Yo u should use good judgment to identify potential saf[...]
-
Page 14
Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electr ostatic discharge (ESD.) ESD damage can occur when there is a dif ference in charge between objects. Pr otect against ESD damage by equalizing the charge so that the machine, t[...]
-
Page 15
Safety notices: multilingual translations The safety notices in this section are pr ovided in English, French, German, Hebrew , Italian, Japanese, and Spanish. Safety notice 1 Before the computer is power ed on after FRU replacement, make sure all scr ews, springs, and other small parts are in place and ar e not left loose inside the computer . V e[...]
-
Page 16
Safety notice 2 D ANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery , recharge it, throw it into fire or water , or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery [...]
-
Page 17
Safety notice 3 D ANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water , or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result[...]
-
Page 18
Safety notice 4 D ANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector , disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water . Dispose of the battery as required by local ordinances or regulations. Use only the battery in the app[...]
-
Page 19
Safety notice 5 If the LCD breaks and the fluid fr om inside the LCD gets into your eyes or on your hands, immediately wash the affected ar eas with water for at least 15 minutes. Seek medical care if any symptoms fr om the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous r ecevez dans les yeux [...]
-
Page 20
Safety notice 6 D ANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren T eil der S[...]
-
Page 21
Safety notice 8 D ANGER Before removing any FRU, power off the computer , unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. A vant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise[...]
-
Page 22
Laser compliance statement Some models of ThinkPad computer are equipped fr om the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requir ements of the Department of Health and Human [...]
-
Page 23
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: D ANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio lase[...]
-
Page 24
16 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 25
Important service information This chapter presents following important service information: v “Strategy for replacing FRUs” – “Strategy for replacing a har d disk drive” on page 18 – “Important notice for replacing a system boar d” on page 18 – “How to use error message” on page 18 v “Strategy for replacing FRUs for CT O, C[...]
-
Page 26
v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue . v Some computers have both a processor boar d and a system board. If you ar e instructed to r eplace either the pr ocessor board or the system board, and replacing one of them does not corr ect the problem, rei[...]
-
Page 27
Strategy for replacing FRUs for CTO, CMV , and GA V Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configur e an IBM ® or a Lenovo solution from an eSite, and have this configuration sent to fulfillment, wher e it is built and shipped directly to the customer . The machine label, Product Entitlement[...]
-
Page 28
warranty.vm&sitestyle=lenovo Select W arranty lookup. Input the MT and the Serial number and the list of key commodities will be returned in the PEW r ecord under COMPONENT INFORMA TION. v Business Partners using Eclaim will access PEW when performing Entitlement Lookup. Business Partners will enter Loc ID, MT and Serial, and the key commoditie[...]
-
Page 29
Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry . RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Product[...]
-
Page 30
22 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 31
General checkout This chapter presents following information: v “What to do first” on page 24 v “Checkout guide” on page 25 – “Diagnostics using PC-Doctor for DOS” on page 26 – “PC-Doctor for W indows” on page 28 – “PC-Doctor for Rescue and Recovery” on page 28 v “Power system checkout” on page 29 The descriptions in t[...]
-
Page 32
What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: __ 1. Name and phone number of servicer __ 2. Date of service __ 3. Date on which the machine failed __ 4. Date of purchase __ 5. Failure symptoms, err or codes appearing on the display , and b[...]
-
Page 33
Checkout guide Use the following procedur es as a guide in identifying and correcting problems with the ThinkPad computer . Note: The diagnostic tests are intended to test only ThinkPad pr oducts. The use of non-ThinkPad products, pr ototype cards, or modified options can lead to false indications of errors and invalid system r esponses. 1. Identif[...]
-
Page 34
Diagnostics using PC-Doctor for DOS The ThinkPad computer has a test program called PC-Doctor for DOS (her eafter called PC-Doctor .) Yo u can detect errors by running the diagnostics test included in PC-Doctor . This section is an overview of the procedure. For details that depend on model-unique functions, refer to “ThinkPad X200 T ablet” on [...]
-
Page 35
Note: PC-Doctor menu does not mean the formal support device list. Some unsupported device names may appear in the PC-Doctor menu. The options on the test menu are as follows: Diagnostics Interactive T ests v Run Normal T est v Run Quick T est v CPU/Coprocessor v Systemboard v V ideo Adapter v Serial Ports v Parallel Ports v Fixed Disks v Diskette [...]
-
Page 36
Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info v System Configuration v Memory Contents v Physical Disk Drives v Logical Disk Drives v VGA Information v IDE Drive Info v PCI Information v PNPISA Info v SMBIOS Info v VESA LCD Info v Hardwar e Events Log Utility v Run External T ests v[...]
-
Page 37
Power system checkout To verify a symptom, do the following: 1. T urn off the computer . 2. Remove the battery pack. 3. Connect the ac adapter . 4. Check that power is supplied when you turn on the computer . 5. T urn off the computer . 6. Disconnect the ac adapter and install the charged battery pack. 7. Check that the battery pack supplies power [...]
-
Page 38
Checking operational charging To check whether the battery charges properly during operation, use a dischar ged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer . Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it[...]
-
Page 39
Checking the backup battery Do the following: 1. Power off the computer , and unplug the ac adapter fr om it. 2. T urn the computer upside down. 3. Remove the battery pack (see “1020 Battery pack” on page 63). 4. Remove the backup battery (see “1090 Backup battery” on page 78). 5. Measure the voltage of the backup battery . See the followin[...]
-
Page 40
32 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 41
Related service information This chapter presents following information: v “Restoring the factory contents by using Product Recovery discs” v “Passwords” on page 34 v “Power management” on page 37 v “Symptom-to-FRU index” on page 39 Restoring the factory contents by using Product Recovery discs When the hard disk drive (HDD) or soli[...]
-
Page 42
8. When the recovery pr ocess is complete, the W elcome to Microsoft W indows screen is displayed. Follow the instr uctions on the screen to complete the W indows setup. Passwords As many as three passwor ds may be needed for any ThinkPad computer: the power-on passwor d (POP), the hard-disk password (HDP), and the supervisor password (SVP). If any[...]
-
Page 43
How to remove the power-on password To remove a POP that you have forgotten, do the following: (A) If no SVP has been set: 1. T urn off the computer . 2. Remove the battery pack. For how to remove the battery pack, see “1020 Battery pack” on page 63. 3. Remove the backup battery . For how to remove the backup battery , see “1090 Backup batter[...]
-
Page 44
Note: To check whether the ThinkPad computer supports the Passphrase function, enter the BIOS Setup Utility and go to Security --> Password . If Using Passphrase item is displayed in the menu, this function is available on the ThinkPad computer . 3. Select Security , using the cursor directional keys to move down the menu. 4. Select Password . 5[...]
-
Page 45
Power management To reduce power consumption, the computer has three power management modes: screen blank, standby , and hibernation. Screen blank mode If the time set on the “T urn off monitor” timer in the operating system expir es, the LCD backlight turns off. To put the computer into screen blank mode, press the ThinkV antage ® button and [...]
-
Page 46
v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters standby mode. W ait a few seconds before taking any action to r eenter operation mode. Hibernation mode In hibernation mode, the following occurs: v The sy[...]
-
Page 47
Symptom-to-FRU index This section contains following information: v “Numeric error codes” v “Error messages” on page 43 v “Beep symptoms” on page 44 v “No-beep symptoms” on page 44 v “LCD-related symptoms” on page 45 v “Intermittent problems” on page 46 v “Undetermined problems” on page 46 The symptom-to-FRU index in thi[...]
-
Page 48
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0187 EAIA data access error—The access to EEPROM is failed. System board. 0188 Invalid RFID Serialization Information Area. System board. 0189 Invalid RFID configuration information area—The EEPROM checksum is not corr ect. System board. 0190 Critical low-batt[...]
-
Page 49
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0250 System battery error—System battery is dead. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter . 2. Replace the backup battery and ru n BIOS Setup Utility to reset the time and date. 0251 System CMOS checksum bad— Default con[...]
-
Page 50
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 1804 Unauthorized WA N card is plugged in—Power off and r emove the WA N card. 1. Remove the WA N card that you installed. 2. System board. 1805 Unauthorized W ireless USB car d is plugged in—Power off and r emove the W ireless USB card. 1. Remove the Wireless[...]
-
Page 51
Error messages T able 2. Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility . 2. Backup battery . 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility . 2. Backup battery . 3. System board. Failing bits: nnnn. 1. D[...]
-
Page 52
Beep symptoms T able 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector . 2. LCD assembly . 3. External CRT . 4. System board. One long and two short beeps, and a blank or unreadable LCD. 1. System board . 2. LCD assembly . 3. DIMM. Tw o short beeps with error [...]
-
Page 53
LCD-related symptoms T able 5. Minimum quantity of defective pixels required for LCD replacement on June 2006 or later manufactured ThinkPad LCD resolution Bright dots Dark dots Bright and dark dots XGA, WXGA 5 6 6 WXGA+, SXGA+, WSXGA+ 5 8 10 UXGA, WUXGA, QXGA 5 13 13 Notes: v Lenovo will not provide r eplacement if the LCD is within specification [...]
-
Page 54
Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardwar e defect, such as cosmic radiation, electrostatic discharge, or softwar e errors. FRU replacement should be consider ed only when a problem r ecurs. When analyzing an intermittent problem, do the following: 1. Run the dia[...]
-
Page 55
ThinkPad X200 T ablet This chapter presents following pr oduct-specific service references and product-specific parts information. v “Specifications” on page 48 v “Status indicators” on page 50 v “FRU tests” on page 52 v “Fn key combinations” on page 54 v “FRU replacement notices” on page 56 v “Removing and replacing a FRU” [...]
-
Page 56
Specifications The following table lists the specifications of the ThinkPad X200 T ablet : T able 7. Specifications Feature Description Processor v Intel ® Core ™ 2 Duo pr ocessor SU9300 (1.2 GHz), 800-MHz FSB, 3-MB L2 cache v Intel Core 2 Duo processor SL9300 (1.6 GHz), 1066-MHz FSB, 6-MB L2 cache v Intel Core 2 Duo processor SL9400 (1.86 GHz),[...]
-
Page 57
T able 7. Specifications (continued) Feature Description I/O port (ThinkPad X200 T ablet) v External monitor connector v Stereo headphone jack v Monaural microphone jack v Docking connector v RJ-1 1 (Modem) connector (some models) v RJ-45 (Ethernet) connector v Universal serial bus (USB) connector × 3 v 5-in-1 Media Card Reader slot (some models) [...]
-
Page 58
Status indicators The system status indicators show the status of the computer , as follows: 1 2 3 4 5 6 7 8 9 10 8 9 10 T able 8. Status indicators Indicator Meaning 1 W ireless LAN status Green: The wireless LAN featur e is on, and the radio link is ready for use. Blinking green: Data is being transmitted. 50 ThinkPad X200 T ablet Hardware [...]
-
Page 59
T able 8. Status indicators (continued) Indicator Meaning 2 W ireless PA N status R or Green: W ireless PA N ( Bluetooth wireless or W ir eless USB) is operational. This indicator is on when W ireless PA N is on and not in suspend mode. 3 W ireless WA N status Green: The wireless WA N is on, and the radio link is ready for use. Blinking[...]
-
Page 60
FRU tests The following table shows the test for each FRU. T able 9. FRU tests FRU Applicable test System board 1. Diagnostics --> CPU/Coprocessor 2. Diagnostics --> Systemboard 3. If the ThinkPad X200 UltraBase is attached to the ThinkPad computer , detach it. Place the computer on a horizontal surface, and run Diagnostics --> ThinkPad De[...]
-
Page 61
T able 9. FRU tests (continued) FRU Applicable test DVD drive or DVD/CD-R W combo drive 1. Diagnostics --> Other Devices --> Optical Drive 2. Interactive T ests --> Optical Drive T est Memory 1. If two DIMMs are installed, remove one of them and run Diagnostics --> PM Memory . 2. If the problem does not recur , return the DIMM to its pl[...]
-
Page 62
Fn key combinations The following table shows the function of each combination of Fn with a function key . T able 10. Fn key combinations Key combination Description Fn+F1 Reserved. Fn+F2 Lock the computer . Fn+F3 Select a power scheme that has been created by Power Manager . When you press this combination, a panel for selecting a power scheme app[...]
-
Page 63
T able 10. Fn key combinations (continued) Key combination Description Fn+F7 Apply a presentation scheme dir ectly , with no need to start Presentation Dir ector . To disable this function and use the Fn+F7 key combination for switching a display output location, start Presentation Dir ector , and change the settings. Switch a display output locati[...]
-
Page 64
FRU replacement notices This section contains notices related to r emoving and replacing parts. Read this section carefully befor e replacing any FRU. Screw notices Loose screws can cause a r eliability problem. In the ThinkPad computer , this problem is addr essed with special nylon-coated screws that have the following characteristics: v They mai[...]
-
Page 65
Retaining serial numbers This section includes the following descriptions: v “Restoring the serial number of the system unit” v “Retaining the UUID” v “Reading or writing the ECA information” on page 59 Restoring the serial number of the system unit When the computer was manufactured, the EEPROM on the system boar d was loaded with the [...]
-
Page 66
When you replace the system boar d, you must set the UUID on the new system board as follows: 1. Install the ThinkPad Hardwar e Maintenance Diskette V ersion 1.73 or later , and restart the computer . 2. From the main menu, select 4. Assign UUID . A new UUID is created and written. If a valid UUID alr eady exists, it is not overwritten. 58 ThinkPad[...]
-
Page 67
Reading or writing the ECA information Information on Engineering Change Announcements (ECA) are stor ed in the EEPROM of the system board. The electr onic storage of this information simplifies the procedur e to check if the ECA has been previously applied to a machine. The machine does not need to be disassembled to check for the ECA application.[...]
-
Page 68
Removing and replacing a FRU This section presents dir ections and drawings for use in removing and replacing a FRU. Be sure to observe the following general r ules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before r eplacing any FRU, review “FRU r epl[...]
-
Page 69
Before servicing ThinkPad X200 T ablet Removing the SIM card: Some models of the ThinkPad X200 T ablet you are servicing might have the SIM card that the customer has been installed. If the computer you are servicing has the SIM car d, remove it before you start the servicing. To remove the SIM card, you need to r emove the battery pack first. (See[...]
-
Page 70
1010 Digitizer pen T able 11 . Removal steps of digitizer pen 2 1 62 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 71
1020 Battery pack D ANGER T able 12. Removal steps of battery pack Unlock the battery release lever . Holding the battery release lever in the unlocked position 1 , remove the battery pack in the dir ection shown by arrow 2 . 2 1 When installing: Install the battery pack along the slide rails of the slot. Then make sure that the battery[...]
-
Page 72
1030 Hard disk drive (HDD) cover , HDD, and HDD rubber rails or solid state drive (SSD) and storage converter For access, remove this FRU: v “1020 Battery pack” on page 63 T able 13. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter 1 2 3 Step Screw (quantity) Color T orque 1 Hard disk drive scr ew [...]
-
Page 73
T able 13. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter (continued) 4 5 When installing: Make sure that the HDD connector or SSD connector is attached firmly . ThinkPad X200 T ablet 65[...]
-
Page 74
T able 13. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter (continued) HDD and HDD rubber rails: 6 6 When installing: The rubber rails on the har d disk drive must be attached to the replacement drive. Otherwise the drive cannot be installed pr operly . SSD and storage converter: 6 66 ThinkPad X200 T ablet [...]
-
Page 75
T able 13. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter (continued) When installing: When you install the SSD in the storage converter , do as follows. 1 ThinkPad X200 T ablet 67[...]
-
Page 76
1040 DIMM For access, remove this FRU in or der: v “1020 Battery pack” on page 63 T able 14. Removal steps of dimm Remove the DIMM slot cover as shown in this figure. Note: Loosen the screws 1 , but do not r emove them. 2 1 1 68 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 77
T able 14. Removal steps of dimm (continued) Note: If only one DIMM is used on the computer you are servicing, the car d must be installed in SLOT -0 ( a ), but not in SLOT -1 ( b ). a b When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly , and pivot it until it snaps into the place. Make sure that[...]
-
Page 78
1050 Hinge caps For access, remove this FRU in or der: v “1020 Battery pack” on page 63 T able 15. Removal steps of hinge caps 1 Open the LCD unit, and then remove the hinge cap (fr ont). 2 3 70 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 79
T able 15. Removal steps of hinge caps (continued) Close the LCD unit, and then remove the hinge cap (r ear). 4 5 ThinkPad X200 T ablet 71[...]
-
Page 80
1060 Keyboard For access, remove this FRU in or der: v “1020 Battery pack” on page 63 T able 16. Removal steps of keyboard 1 1 1 1 Step Icon Screw (quantity) Color T orque 1 M2 × 6 mm, wafer-head, nylon-coated (4) Black 0.181 Nm (1.85 kgfcm) 72 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 81
T able 16. Removal steps of keyboard (continued) 2 3 3 3 Lift the keyboard a little in the dir ection shown by arrow 4 , and then detach the connector 5 . 5 4 ThinkPad X200 T ablet 73[...]
-
Page 82
T able 16. Removal steps of keyboard (continued) When installing: 1. Attach the keyboard connector firmly . 2. Make sure that the keyboar d edges are under the frame as shown in this figure. Then pr ess the keys to latch the keyboard firmly in place. 3. To make sure that the front side of the keyboar d is housed firmly , gently press the keys with [...]
-
Page 83
1070 Extension cable card For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 T able 17. Removal steps of backup battery 2 2 1 1 1 1 1 3 3 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-head, nylon-coated (5) Black 0.181 Nm (1.85 kgfcm) 2 M2 × 6 mm, flat-head, nylon-[...]
-
Page 84
1080 Palm rest For access, remove this FRU in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 T able 18. Removal steps of palm rest 1 1 1 1 1 Step Icon Screw (quantity) Color T orque 1 M2 × 6 mm, wafer-head, nylon-coated (5) Black 0.181 Nm (1.85 kgfcm) 2 3 3 3 2 76 ThinkPad X200 T ablet Hardware Maintenance Manu[...]
-
Page 85
T able 18. Removal steps of palm rest (continued) When installing: When you attach the palm rest, do as follows: 1. Press the left and right top edges of the palm r est to fit it into place. 2. Push the front side of the palm r est until it clicks into place. 1 2 2 1 3. Close the LCD cover and turn the computer over . Then fasten the five screws to[...]
-
Page 86
1090 Backup battery D ANGER For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 T able 19. Removal steps of backup battery 1 Use only the battery specified in the parts list for your computer . Any other battery could ignite or explode. 78 ThinkPad X200 T a[...]
-
Page 87
T able 19. Removal steps of backup battery (continued) 3 2 When installing: Make sure that the battery connector is attached firmly . ThinkPad X200 T ablet 79[...]
-
Page 88
1 100 PCI Express Mini Card for wireless LAN For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 T able 20. Removal steps of PCI Express Mini Card for wireless LAN Full size PCI Express Mini Card: In step 1 , unplug the jacks by using the removal tool[...]
-
Page 89
T able 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) 3 When installing: v In models with wireless LAN car d that has two antenna connectors, plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX . If the computer you are servicing has thr ee cables, put the white cable in[...]
-
Page 90
T able 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) Harf size PCI Express Mini Card: In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arr ow . 1 2 2 Step Screw (quantity) Color T orque 2?[...]
-
Page 91
T able 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) When installing: v Plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX . ThinkPad X200 T ablet 83[...]
-
Page 92
111 0 PCI Express Mini Card for wireless WA N For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 T able 21. Removal steps of PCI Express Mini Card for wireless WAN In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7[...]
-
Page 93
T able 21. Removal steps of PCI Express Mini Card for wireless WAN (continued) 3 When installing: When you install the card, plug the red cable into the jack labeled MAIN on the card, and the blue cable into the jack labeled AUX . If the computer you are servicing is the wir eless W AN-ready model, put the antenna cables in the cable protection tub[...]
-
Page 94
1 120 Intel T urbo Memory Minicard or wireless USB adapter For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 T able 22. Removal steps of Intel T urbo Memory Minicard or wireless USB adapter Note: Step 1 is only for models with the wireless USB adapt[...]
-
Page 95
T able 22. Removal steps of Intel T urbo Memory Minicard or wireless USB adapter (continued) 3 When installing: In models with the wireless USB adapter , plug the yellow cable into the jack on the card. ThinkPad X200 T ablet 87[...]
-
Page 96
1 130 Bluetooth daughter card (BDC-2.1) For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 T able 23. Removal steps of Bluetooth daughter card 1 2 3 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.8[...]
-
Page 97
T able 23. Removal steps of Bluetooth daughter card (continued) T urn the Bluetooth daughter card over , and then disconnect the cable from the connector . 4 When installing: Make sure that the connector 4 is attached firmly . ThinkPad X200 T ablet 89[...]
-
Page 98
1 140 Keyboard bezel For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 T able 24. Removal steps of keyboard bezel 1 1 1 2 2 2 2 Step Screw (quantity) Color T orque 1 M2 × 6 mm, wafer-head, nylon-coated (3) Blac[...]
-
Page 99
T able 24. Removal steps of keyboard bezel (continued) 3 Step Screw (quantity) Color T orque 3 M2 × 2 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) Rotate the LCD unit as shown in this figure. 4 ThinkPad X200 T ablet 91[...]
-
Page 100
T able 24. Removal steps of keyboard bezel (continued) In step 5 , detach the claws. Then remove the keyboar d bezel in the direction shown by arrow 6 . Attention: When you service the keyboard bezel, avoid any kind of r ough handling. 5 6 5 5 5 6 When installing: Make sure that all the claws ar e attached firmly . 92 ThinkPad X200 T ab[...]
-
Page 101
1 150 I/O card assembly For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 v “ 111 0 PCI Express Mini Card for wir eless W AN” on page 84 v “1 140 Keyboar d bezel” on page 90 T able 25. Removal steps of I/O car[...]
-
Page 102
T able 25. Removal steps of I/O card assembly (continued) Note: The cable is secured with a double-faced adhesive tape. 7 6 T urn the I/O card over , and then disconnect the cable from the flip-lock ZIF connector . 8 9 94 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 103
1 160 USB sub card For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 v “1 140 Keyboar d bezel” on page 90 T able 26. Removal steps of USB sub card 4 2 2 3 1 Step Screw (quantity) Color T orque 1 M2 × 6 mm, [...]
-
Page 104
T able 26. Removal steps of USB sub card (continued) T urn the USB sub card over , an then disconnect the cable from the connector . 5 6 5 When installing: Route the cable as shown in this figure. 96 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 105
1 170 LCD assembly For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for wireless LAN” on page 80 v ?[...]
-
Page 106
T able 27. Removal steps of LCD assembly (continued) 2 2 Step Screw (quantity) Color T orque 2 M2.5 × 6 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) 98 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 107
T able 27. Removal steps of LCD assembly (continued) Before step 3 , strip of f the tapes securing the antenna cables, and release the cables from the cable guides of the frame. 3 4 ThinkPad X200 T ablet 99[...]
-
Page 108
T able 27. Removal steps of LCD assembly (continued) When installing: Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sur e that they are not subjected to any tension. T ension could cause the cables to be damaged by the cable guides, or a wire to be br oken. 100 ThinkPad X200 T ablet Ha[...]
-
Page 109
1 180 DC-in connector , fan, digitizer pen case, and pen switch assembly For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI[...]
-
Page 110
T able 28. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) 3 4 Step Screw (quantity) Color T orque 4 M2 × 3.5 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) 102 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 111
T able 28. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) In step 6 and 7 , remove the digitizer pen case assembly . 6 5 7 Step Screw (quantity) Color T orque 5 M1.6 x 3 + 4.2A mm, shoulder socket-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) 6 M2 × 3.5 mm, wafer-head, n[...]
-
Page 112
T able 28. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) 8 8 8 8 8 8 Step Screw (quantity) Color T orque 8 M2 × 3.5 mm, wafer-head, nylon-coated (6) Silver 0.181 Nm (1.85 kgfcm) 10 11 9 When installing: Make sure that the position of the wir eless switch, and firmly fit into the frame b[...]
-
Page 113
T able 28. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) T urn the system board over , and then disconnect the DC-in connector , the fan connector , and the pen switch connector from the system board. 12 13 14 When installing: Make sure that the DC-in connector , the fan connector , and the Pen swit[...]
-
Page 114
T able 28. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) When installing: v Before you attach the fan assembly to the computer , apply thermal gr ease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a ther[...]
-
Page 115
1 190 System board and ExpressCard slot assembly For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for [...]
-
Page 116
T able 29. Removal steps of system board and ExpressCard slot assembly Following components soldered on the system boar d are extremely sensitive. When you service the system board, avoid any kind of r ough handling. a ICH (I/O Controller Hub) b CPU c MCH (Memory Controller Hub) d Accelerometer chip for the HDD Active Pr ote[...]
-
Page 117
T able 29. Removal steps of system board and ExpressCard slot assembly (continued) Note: The ExpressCar d slot assembly is attached to the system board. 1 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) T urn the system board over , and then remove the Expr essCard slot assembly fr[...]
-
Page 118
1200 Base cover and speaker assembly For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for wireless LAN[...]
-
Page 119
Applying labels to the base cover: The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover , you need to apply the following labels: 2 Homologation label 12 Product label Following labels need to be peeled off fr om the old base cover , and need to be put on the new base cover . ?[...]
-
Page 120
2010 LCD front bezel For access, remove this FRU: v “1020 Battery pack” on page 63 T able 31. Removal steps of LCD front bezel for T ablet Digitizer Pen model T ablet Digitizer Pen model: 1 1 1 1 1 Step Screw cap Screw (quantity) Color T orque 1 M2.5 × 8 mm, wafer-head, nylon-coated (5) Black 0.392 Nm (4 kgfcm) 2 3 2 11 2 ThinkPad X200 T[...]
-
Page 121
T able 31. Removal steps of LCD front bezel for T ablet Digitizer Pen model (continued) 4 When installing: Attach the fingerprint reader connector firmly . ThinkPad X200 T ablet 11 3[...]
-
Page 122
T able 32. Removal steps of LCD front bezel for T ouch panel and T ablet Digitizer Pen model T ouch panel and T ablet Digitizer Pen model: 1 1 1 1 1 1 1 1 2 2 2 1 2 2 2 Step Screw cap Screw (quantity) Color T orque 1 M2.5 × 8 mm, wafer-head, nylon-coated (9) Black 0.392 Nm (4 kgfcm) 2 M2 × 3.5 mm, wafer-head, nylon-coated (6) Black 0.[...]
-
Page 123
T able 32. Removal steps of LCD front bezel for T ouch panel and T ablet Digitizer Pen model (continued) 5 4 4 When installing: Make sure that attach the fingerprint r eader connector firmly . ThinkPad X200 T ablet 11 5[...]
-
Page 124
2020 Micro-Processor card For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “2010 LCD front bezel” on page 11 2 T able 33. Removal steps of Micro-Processor card Note: Step 1 is only for models with the inverter card. For models without the inverter card, skip step 1 . In step 1 , detach the connec[...]
-
Page 125
T able 33. Removal steps of Micro-Processor card (continued) 2 2 2 3 2 Step Screw (quantity) Color T orque 2 M2 × 3.5 mm, wafer-head, nylon-coated (3) Silver 0.181 Nm (1.85 kgfcm) 3 M2 × 3 mm, stud, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) Note: In step 3 , The height of stud head for T ablet Digitizer pen model [...]
-
Page 126
2030 Inverter card For access, remove these FRUs in or der: v “1020 Battery pack” on page 63 v “2010 LCD front bezel” on page 11 2 v “2020 Micro-Pr ocessor card” on page 11 6 T able 34. Removal steps of inverter card Note: Some models do no have the inverter card. 2 3 1 1 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-h[...]
-
Page 127
2040 Hinges For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for wireless LAN” on page 80 v “ 111 [...]
-
Page 128
T able 35. Removal steps of hinge (continued) Detach the hinge from the LCD r ear cover , and gently pull the cables out through the guide hole in the hinge. Pull them all at once. As you pull them, be sure not to subject them to any tension, which could cause them to be damaged by the cable guides, or could break a wir e. 3 3 2 2 120 ThinkPad X200[...]
-
Page 129
2050 LCD panel and LCD cable For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for wireless LAN” on p[...]
-
Page 130
T able 36. Removal steps of LCD panel and LCD cable for T ablet Digitizer Pen model T ablet Digitizer Pen model: 2 2 2 2 2 2 1 1 1 1 3 3 3 Step Screw cap Screw (quantity) Color T orque 1 M2.5 × 8 mm, wafer-head, nylon-coated (4) Black 0.392 Nm (4 kgfcm) 2 M2 × 3.5 mm, wafer-head, nylon-coated (6) Black 0.181 Nm (1.85 kgfcm) 3 ?[...]
-
Page 131
T able 36. Removal steps of LCD panel and LCD cable for T ablet Digitizer Pen model (continued) In step 4 , detach the claws. Then remove the LCD panel . 4 4 4 4 4 4 4 4 4 4 When installing: Make sure that all the claws ar e attached firmly . ThinkPad X200 T ablet 123[...]
-
Page 132
T able 36. Removal steps of LCD panel and LCD cable for T ablet Digitizer Pen model (continued) Note: Step 5 is only for models with the integrated camera. For models without the integrated camera, skip step 5 . 6 5 When installing: Make sure that the connector 5 is attached firmly . 124 ThinkPad X200 T ablet Hardware Maintenance [...]
-
Page 133
T able 36. Removal steps of LCD panel and LCD cable for T ablet Digitizer Pen model (continued) T urn the LCD panel over , and then remove the LCD cable from the LCD panel. 7 8 9 10 When installing: Make sure that the LCD cable connector ar e attached firmly . ThinkPad X200 T ablet 125[...]
-
Page 134
T able 37. Removal steps of LCD panel and LCD cable for T ouch panel and T ablet Digitizer Pen model T ouch panel and T ablet Digitizer Pen model: 1 1 1 1 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver 0.181 Nm (1.85 kgfcm) 126 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 135
T able 37. Removal steps of LCD panel and LCD cable for T ouch panel and T ablet Digitizer Pen model (continued) Note: Step 2 is only for models with the integrated camera. For models without the integrated camera, skip step 2 . 2 When installing: Make sure that the connector 2 is attached firmly . 3 ThinkPad X200 T ablet 127[...]
-
Page 136
T able 37. Removal steps of LCD panel and LCD cable for T ouch panel and T ablet Digitizer Pen model (continued) T urn the LCD panel over , and then remove the LCD cable from the LCD panel. 4 5 6 7 When installing: Make sure that the LCD cable connector ar e attached firmly . 128 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 137
2060 Integrated camera For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for wireless LAN” on page 80[...]
-
Page 138
2070 LCD rear cover and wireless antenna cables For access, remove these FRUs in or der: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest” on page 76 v “1 100 PCI Expr ess Mini Card for w[...]
-
Page 139
T able 39. Removal steps of LCD rear cover and wireless antenna cables (continued) 3 In step 4 , release the antenna cables fr om the cable guides of the rear cover . 4 4 4 4 5 ThinkPad X200 T ablet 131[...]
-
Page 140
T able 39. Removal steps of LCD rear cover and wireless antenna cables (continued) 6 6 6 6 6 6 7 Remove the center latch from the LCD r ear cover . 1 1 2 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) 132 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 141
T able 39. Removal steps of LCD rear cover and wireless antenna cables (continued) When installing: Place the antenna assembly as shown in this figure. a W ireless WA N antenna, AUX (blue) b W ireless LAN antenna, AUX (black) c W ireless USB antenna (yellow) d W ireless WA N antenna, MAIN (red) e W ireless LAN antenna,[...]
-
Page 142
Locations Front view 1 Center latch 2 Integrated camera (for some models) 3 Universal serial bus (USB) connector 4 T ablet digitizer pen 5 Hard disk drive (HDD) or solid state drive (SSD) 6 RJ-1 1 (modem) connector (for some models) 7 Microphone jack 8 Stereo headphone jack 9 Universal serial bu[...]
-
Page 143
Rear view 1 Status indicators Note: For the description of each indicator , see “Status indicators” on page 50. 2 ExpressCar d slot 3 W ireless radio switch 4 Universal Serial Bus (USB) connector 5 RJ-45 (Ethernet) connector 6 External monitor connector 7 AC power connector 8 Security key hole 2 3[...]
-
Page 144
Bottom view 1 Battery pack 2 Battery pack latch 3 Docking connector 4 DIMM slots 5 Built-in speakers 6 LCD cover latch 7 5-in-1 Media Card Reader or 3-in-1 Media Car d Reader slot 3 4 6 7 2 1 5 136 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 145
Rear view (ThinkPad X200 UltraBase) 1 AC power connector 2 Universal serial bus (USB) connectors 3 External monitor connector 4 DisplayPort connector 5 Headphone jack 6 Microphone jack 7 RJ-45 (Ethernet) connector 8 Security keyhole 9 Security lock key 10 Universal serial bus (USB) connect[...]
-
Page 146
Bottom view (ThinkPad X200 UltraBase) 1 Battery charger (behind the flip-down door) 2 UltraBase eject request button 3 UltraBase eject lever 4 Power button security latch 5 Power button 6 Built-in stereo speakers 1 2 3 5 6 4 138 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 147
Parts list This section contains following lists of the service parts. v “Overall” on page 140 v “LCD FRUs” on page 154 v “Keyboard” on page 161 v “Miscellaneous parts” on page 162 v “AC adapters” on page 163 v “Power cords” on page 164 v “Recovery discs” on page 165 v “Common service tools” on page 170 Notes: v Each[...]
-
Page 148
Overall 1 2 3 a 6 7 8 9 10 11 12 14 13 15 16 17 20 21 22 24 25 26 27 28 29 30 31 32 18 19 23 4 5 T able 40. Parts list—Overall No. FRU FRU no. RoHS ID CRU ID a See “Miscellaneous parts” on page 162. 1 LCD unit (see “LCD FRUs” on page 154.) 2 Extension cable card assembly 42W8085 R N 140 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 149
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 3 USB sub card assembly 42W8086 R N 4 Pen switch assembly 45N4817 R N 5 Digitizer pen case assembly 45N3146 R N 6 Backup battery 92P1210 R N 7 Intel T urbo Memory 2-GB Minicard v 4184-CTO, 8Ex, 97x, E4x, E6x, E7x, EFx, EGx, ENx v 7448-CTO, 8Dx, 9Dx, E3x, E5x, E8x, EEx, EHx, [...]
-
Page 150
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 8 System board with Intel Cor e 2 Duo processor SL9300 with TPM (1.6 GHz) v 4184-CTO, 8Ex, 97x, E4x, E6x, E7x, E9x, F4x, F5x, F7x, F8x, H6x v 7448-CTO, 8Dx, 8Vx, 8Wx, 8Xx, 9Dx, E3x, E5x, E8x, EAx, F3x, F5x, F6x, F8x, H5x v 7449-CTO, 99x, 9Ax, 9Bx, 9Cx, E5x, E8x, EAx, EWx, EY[...]
-
Page 151
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 9 512-MB DDR3-1066 SDRAM SO-DIMM (PC3-8500) card v 4184-CTO v 7448-CTO, 2Ex, 8Vx v 7449-CTO v 7450-CTO, 8Cx v 7453-CTO v 2263-CTO v 2266-CTO 43R1775 R * 9 1-GB DDR3-1066 SDRAM SO-DIMM (PC3-8500) card v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, F4x, F5x, F7x[...]
-
Page 152
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 10 Ericsson F3507g Other - W ireless WA N card v 4184-CTO v 7448-CTO v 7449-CTO, FWx v 7450-CTO, 26x, 2Ax, 86x, 89x, 8Kx, 8Nx, 8Tx, EMx, ERx, FHx, FJx, FVx v 7453-CTO v 2263-CTO v 2266-CTO 43Y6479 R ** 11 ThinkPad 1 1b/g W ireless LAN Mini PCI Express Adapter III v 4184-CTO [...]
-
Page 153
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 12 I/O card assembly with modem connector , with 5-in-1 Media Card Reader v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, 8Dx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x[...]
-
Page 154
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 Battery pack, 8 cell v 4184-CTO, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, FFx, FGx, H4x, H6x v 7448-CTO, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, FEx, FGx, FKx, G6x, H3x, H5x v 7449-CTO, 84x, 88x, 8Fx, 8Jx, 8Lx, 8Qx, 8Rx, 8Sx, 99x, 9Ax, 9Bx, 9Cx, 9Hx, E5x, E8x, EAx, EHx, EK[...]
-
Page 155
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 16 S ATA hard disk drive, 160 GB, 9.5 mm, 5,400 rpm OP v 4184-CTO, 25x, E4x, E6x, E7x, F4x, F5x, FBx, FCx, H6x v 7448-CTO, 2Ex, 8Vx, 9Kx, 9Lx, E3x, E5x, E8x, F3x, F5x, F Ax, FCx, H5x v 7449-CTO, 25x, 9Ax, 9Ex, 9Fx, E5x, E8x, EWx, EYx, F9x v 7450-CTO, 25x, 2Ax, 2Cx, 2Dx[...]
-
Page 156
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 16 S ATA hard disk drive, 250 GB, 9.5 mm, 5,400 rpm OP v 4184-CTO, 8Ex, 97x, EFx, EGx, ENx, F7x, F8x, FFx, FGx, H4x v 7448-CTO, 8Dx, 8Wx, 8Xx, 9Dx, EEx, EHx, EPx, F6x, F8x, FEx, FGx, FKx, G6x, H3x v 7449-CTO, 8Qx, 8Rx, 8Sx, 9Hx, EHx, EPx, FLx, FNx, FWx, FXx, G5x, G6x v[...]
-
Page 157
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 16 S ATA hard disk drive, 100 GB, 9.5 mm, 7,200 rpm OP v 4184-CTO v 7448-CTO v 7449-CTO, 99x v 7450-CTO, 26x 8Zx, 95x v 7453-CTO v 2263-CTO v 2266-CTO 42T1485 R * 16 S ATA hard disk drive, 100 GB, 9.5 mm, 7,200 rpm v 4184-CTO v 7448-CTO v 7449-CTO, 99x v 7450-CTO, 26x [...]
-
Page 158
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 19 S ATA solid state drive, 64 GB, 8 mm v 4184-CTO, E9x, ESx v 7448-CTO, EAx, EUx v 7449-CTO, EAx, EUx v 7450-CTO, 8Ax, 8Tx, E9x, ERx, ESx, ETx, G7x v 7453-CTO, E9x, ESx v 2263-CTO v 2266-CTO 42T1898 R * 19 S ATA solid state drive, 80 GB, 8 mm v 4184-CTO v 7448-CTO v 7449-CT[...]
-
Page 159
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 21 DVD/CD-R W combo drive, 9.5 mm v 4184-CTO v 7448-CTO v 7449-CTO v 7450-CTO v 7453-CTO v 2263-CTO v 2266-CTO 42T2543 R * 21 DVD/CD-R W combo drive, 9.5 mm v 4184-CTO v 7448-CTO v 7449-CTO v 7450-CTO v 7453-CTO v 2263-CTO v 2266-CTO 42T2513 R * 21 DVD-RAM/R W drive, 9.5 mm [...]
-
Page 160
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 23 Base cover assembly for 7450 45N3142 R N 23 Base cover assembly for 7453 45N3143 R N 23 Base cover assembly for 2263 45N3144 R N 23 Base cover assembly for 2266 45N3145 R N 24 Bluetooth daughter card (BDC-2.1) v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, [...]
-
Page 161
T able 40. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 26 Fan assembly for LV v 4184-CTO, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, 8Dx, 8Vx, 8Wx, 8Xx, 9Dx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F5x, F6x, F8x, F Ax, FCx, FEx, FGx, FKx, H3x, H5x v 7449-CT[...]
-
Page 162
LCD FRUs In ThinkPad X200 T ablet, there ar e following types of LCDs. v “12.1-in. WXGA TFT” on page 155 1 2 3 4 5 6 7 c 8 9 10 13 11 12 b 154 ThinkPad X200 T ablet Hardware Maintenance Manual[...]
-
Page 163
12.1-in. WXGA TFT T able 41. Parts list—12.1-in. WXGA TFT No. FRU FRU no. RoHS ID CRU ID b - c See “Miscellaneous parts” on page 162. 1 LCD bezel with fingerprint reader for T ouch panel and T ablet Digitizer Pen model v 4184-CTO, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, E3x, E5x, E8[...]
-
Page 164
T able 41. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 3 LCD panel, 12.1-in. WXGA for T ablet Digitizer Pen model v 4184-CTO, 25x, 97x v 7448-CTO, 2Ex, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx v 7449-CTO, 25x, 99x, 9Ax, 9Bx, 9Cx, 9Ex, 9Fx, 9Hx v 7450-CTO, 25x, 26x, 28x, 2Ax, 2Cx, 2Dx, 2Fx, 2Gx, 2Hx, 8Yx, 8Zx, 93x, 94x, 95x, 96x, 9[...]
-
Page 165
T able 41. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 5 Integrated camera v 4184-CTO, 8Ex, 97x, E7x, E9x, ENx, ESx v 7448-CTO, 8Dx, 9Dx, 9Kx, E8x, EAx, EPx, EUx, FKx, G6x v 7449-CTO, 84x, 88x, 8Fx, 8Jx, 8Lx, 8Qx, 8Rx, 8Sx, 99x, 9Ax, 9Bx, 9Cx, 9Hx, E8x, EAx, EKx, EPx, EUx, EWx, EYx, FLx, FNx, FWx, FXx v 7450-CTO, 26x, [...]
-
Page 166
T able 41. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 7 W ireless LAN/W AN antenna assembly v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx v 7448-CTO, 2Ex, 8Dx, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F5x, F6x, F8x, F Ax, FCx[...]
-
Page 167
T able 41. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 7 W ireless LAN/W AN/USB antenna assembly v 4184-CTO, H4x, H6x v 7448-CTO, H3x, H5x v 7449-CTO v 7450-CTO, GAx, GBx, GCx, GDx, GEx v 7453-CTO v 2263-CTO v 2266-CTO 43Y9829 R N 8 LCD rear cover assembly v 4184-CTO, 25x, 97x v 7448-CTO, 2Ex, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, [...]
-
Page 168
T able 41. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 11 Inverter card v 4184-CTO, 25x, 97x v 7448-CTO, 2Ex, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx v 7449-CTO, 25x, 99x, 9Ax, 9Bx, 9Cx, 9Ex, 9Fx, 9Hx v 7450-CTO, 225x, 26x, 28x, 2Ax, 2Cx, 2Dx, 2Fx, 2Gx, 2Hx, 8Yx, 8Zx, 93x, 94x, 95x, 96x, 9Gx, 9Jx, G9x, GAx, L3x v 7453-CTO, 25x, 2[...]
-
Page 169
Keyboard T able 42. Parts list—Keyboard Language P/N RoHS ID CRU ID Arabic 42T3752 42T3686 R ** Belgian 42T3749 42T3683 Brazilian Portuguese 42T3768 42T3702 Bulgarian 42T4143 42T4139 Canadian French (058) 42T3739 42T3673 Canadian French (Acnor) 42T3738 42T3672 Czech 42T3757 42T3691 Danish 42T3746 42T3680 Dutch 42T3743 42T3677 Finnish, Swedish 42T[...]
-
Page 170
Miscellaneous parts T able 43. Parts list—Miscellaneous parts FRU P/N RoHS ID CRU ID Screw kit: v M1.6 × 6 mm (sliver), wafer head (1) v M2 × 2.5 mm (black), wafer head (1) v M2 × 3.5 mm (silver), wafer head (18) v M2 × 3.5 mm (black), wafer head (1) v M2 × 3.5 mm (black), flat head (8) v M2 × 6 mm (silver), wafer head (3) v M2 × 6 mm (bla[...]
-
Page 171
AC adapters T able 44. Parts list—AC adapters FRU P/N RoHS ID CRU ID 2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF , xxJ, xxL, xxP , xxS, xxY , xxU) 42T5282 R * 2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF , xxJ, xxL, xxP , xxS, xxY , xxU) 92P1 159 R * 2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF , xxJ, xxL, xxP , xxS, xxY , xxU) 92P12[...]
-
Page 172
Power cords A ThinkPad power cord for a specific country or r egion is usually available only in that country or region: T able 45. Parts list—2-pin power cords Region P/N RoHS ID CRU ID Argentina v models -CTO, xxY 42T5020 42T5105 R * Brazil v models -CTO, xxP 42T5180 42T5183 Canada, U.S. v models -CTO, xxF , xxL, xxS, xxU 42T5008 42T5093 Japan [...]
-
Page 173
Recovery discs Windows XP T ablet DVDs W indows XP T ablet is preinstalled as the operating system in the following models: v 4184-CTO, F5x, F8x, FCx, FGx v 7448-CTO, 8Wx, F5x, F8x, FCx, FGx v 7449-CTO, 84x, 8Fx, 8Jx, 8Rx, 9Ex, 9Fx, EYx, F9x, FNx v 7450-CTO, 2Hx, 9Gx, EYx, FDx, FNx, G4x, L3x v 7453-CTO, 9Gx, FDx v 2263-CTO v 2266-CTO T able 47. Par[...]
-
Page 174
Windows V ista Home Premium (32 bit) DVDs W indows V ista Home Pr emium (32 bit) is pr einstalled as the operating system in the following models: v 4184-CTO, 25x, 8Ex, 97x v 7448-CTO, 2Ex, 8Dx, 8Vx, 9Dx, 9Kx, 9Lx v 7449-CTO, 25x v 7450-CTO, 25x v 7453-CTO, 25x v 2263-CTO v 2266-CTO T able 48. Parts list—Windows Vista Home Premium (32 bit) DVDs L[...]
-
Page 175
Windows V ista Business (32 bit) DVDs W indows V ista Business (32 bit) is pr einstalled as the operating system in the following models: v 4184-CTO, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F7x, FBx, FFx, H4x, H6x v 7448-CTO, 8Xx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F6x, F Ax, FEx, FKx, G6x, H3x, H5x v 7449-CTO, 88x, 8Lx, 8Qx, 8Sx, 99[...]
-
Page 176
Windows V ista Business (64 bit) DVDs W indows V ista Business (64 bit) is pr einstalled as the operating system in the following models: v 4184-CTO v 7448-CTO v 7449-CTO, EKx v 7450-CTO, FYx v 7453-CTO v 2263-CTO v 2266-CTO T able 50. Parts list—Windows Vista Business (32 bit) DVDs Language P/N RoHS ID CRU ID English 46V2150 R N English (modem-d[...]
-
Page 177
Windows V ista Ultimate (32 bit) DVDs W indows V ista Ultimate (32 bit) is pr einstalled as the operating system in the following models: v 4184-CTO v 7448-CTO v 7449-CTO v 7450-CTO, 8Ax v 7453-CTO v 2263-CTO v 2266-CTO T able 51. Parts list—Windows Vista Ultimate (32 bit) DVDs Language P/N RoHS ID CRU ID Czech 46V2129 R N Danish 46V2130 English [...]
-
Page 178
Common service tools T able 52. Parts list—Common service tools T ool P/N Screwdriver kit 95F3598 1/4 ″ drive spinner handle 1650840 1/4 ″ Sq. to 1/4 ″ hex torx adapter 93F2838 TR7-TR-10 tamper resistant torx bits 00P6967 Removal tool antenna RF connector 08K7159 USB 2.0 CD-R W/DVD-ROM combo drive II 40Y8687 USB cable 40Y8704 USB floppy dis[...]
-
Page 179
Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any refer ence to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo produ[...]
-
Page 180
vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation. Actual r esults may vary . Users of this document should verify the applicable data [...]
-
Page 181
[...]
-
Page 182
Part Number: 45N3683_01 (1P) P/N: 45N3683_01[...]