Lexmark OfficeEdge Pro4000 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 198 pages
- N/A
Aller à la page of 198
Les manuels d’utilisation similaires
-
Printer
Lexmark 47B1001
56 pages 0.57 mb -
Printer
Lexmark 2A6
308 pages 5.45 mb -
Printer
Lexmark X 1190
35 pages 0.72 mb -
Printer
Lexmark 28D0100
222 pages 7.48 mb -
Printer
Lexmark C790
234 pages 6.24 mb -
Printer
Lexmark 101
140 pages 1.5 mb -
Printer
Lexmark 430
171 pages 5.2 mb -
Printer
Lexmark T654DTN
8 pages 0.17 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Lexmark OfficeEdge Pro4000. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Lexmark OfficeEdge Pro4000 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Lexmark OfficeEdge Pro4000 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Lexmark OfficeEdge Pro4000 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Lexmark OfficeEdge Pro4000
- nom du fabricant et année de fabrication Lexmark OfficeEdge Pro4000
- instructions d'utilisation, de réglage et d’entretien de l'équipement Lexmark OfficeEdge Pro4000
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Lexmark OfficeEdge Pro4000 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Lexmark OfficeEdge Pro4000 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Lexmark en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Lexmark OfficeEdge Pro4000, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Lexmark OfficeEdge Pro4000, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Lexmark OfficeEdge Pro4000. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Pro4000 Ser ies User's Guide April 20 12 www.lex mark.com Machine t ype(s): 4447 Mod el (s) : Pro4000: 0n0, 0nE; Pro4000c: 000[...]
-
Page 2
Cont ents Safe ty inform ation. ..... ........... .......... ........... ..... ............ .......... ........... ..... ......6 Abo ut your p rinter. ........... ..... ........... ........... .......... ...... .......... ........... ........... 7 Than k you fo r choo sing t his pr inter! ...... .... ... ..... .... ... ..... .... ... ...... ... ...[...]
-
Page 3
Loadi ng pa per a nd ori ginal docume nts. .......... ...... .......... .......... ..... .......... ...29 Load ing t he pap er tray. .... ... ...... ... ... ...... ... ... ...... ... ... ...... .... ... ..... .... ... ... ...... ... ... ...... ... ... ...... ... ... ... .... ...... ... 29 Load ing va riou s paper ty pes.. .. ... ... ..... ... ... .[...]
-
Page 4
Scan ning to a ne twork c ompute r.... ... ... ...... ... ... ...... ... ... ...... .... ... ...... ... ... ...... ... ... ...... ... ... ...... ... .... . .. ... ... ...65 Scan ning to a ne twork fo lder. ...... ... ... ...... ... ... ...... ... ... ...... ... ... .. ....... .. ... ...... ... ... ...... ... ... ...... ... ... ...... ... ... ... 65[...]
-
Page 5
Clean ing the exterio r of t he pr inter... ... .. ...... ... .. ...... .. ... ...... .. ... ...... .. ... ..... ... ... ..... ... ... ..... ... ... ..... . ..... .. ... .134 Clean ing the scan ner gla ss... ... .. ... ...... ... ... ...... ... .. ...... ... ... ...... .. ... ...... ... ... ...... .. ... ...... ... ... ..... ... . ..... ... ... ...[...]
-
Page 6
Safety informat io n Connec t the pow er cord to a pro perly gro unded e lectrical outlet that is near the pro duct and easily ac cessible. Use only the p ower supply an d pow er cor d prov ided with thi s pr oduct or the manufac turer' s aut horized replac emen ts. CAUTION— POTENTIA L INJURY: T o reduce r isk of fi re, use o nly the t eleco[...]
-
Page 7
About yo ur printer Tha nk you for choos ing th is p rint er! We've worked hard to m ake sure it wi l l meet your needs. To st art usi ng your new pri nter right away, use t he setup m a terial s t h at came with the print er, and th en skim the User’ s Guid e to learn h o w to per form basic tas ks. To get the m ost out of your printer, rea[...]
-
Page 8
Conser ving ink • Use Qu ick Pri nt or Dr af t Mo de. These modes can be use d to print docume nts usi ng less in k than nor mal and ar e recom mended for pri nting documents th at are mo stly text. • Use fon t types and fo nt settin gs that require less ink. Most pro grams or applications let you adj ust the darkne ss of t he color s. • Use [...]
-
Page 9
Wh at are you look ing for? F ind it her e Additional setup and instruc tions for using the printer: • Selecti ng and storing paper and s pecialty m edia • Loading pa per • Perfo rming printing , copying, scanni ng, and f axing tas ks, depending on your pri nter model • Configurin g printer settings • Viewi ng and printi ng docum ents and[...]
-
Page 10
Wh at are you look ing for? F ind it her e Telephone support In th e US, cal l us at: 1-8 00-395 -4039 Monday– Frid ay (9: 00 AM –9:0 0 PM E T), Satu rday (12: 00 noon–6: 00 PM ET) Suppor t telephone numbers and hours of operati on for your region or country can be found on the Suppo rt Web si te ( http: // suppo rt. lexm ark. com ) or on the[...]
-
Page 11
Use t he To 2 ADF input tray Load original document s into the ADF . No te s: • Do not load postcards, photos, small i tem s, or th in m edi a (su ch as m agaz ine clippings) into the ADF . Place these i tems on the scanner glas s. • After scan ning, copying, or faxing, you can l ift the right end of t he input tray to retr ieve the origi nal d[...]
-
Page 12
Use t he To 15 Duplex unit • Print on both sides of a sheet of paper. • Access paper j ams. 16 USB port Connect the printer to a computer using a USB c able. War ning —P otent ia l Dama ge: Do not touch th e USB port except when plug ging in or rem ov ing a USB cable or i ns tallation cable. Note : Remove the sticker to access the port. 17 Et[...]
-
Page 13
Ordering and r eplacing supplies Order ing ink cart ridg es Make sure to order the car trid g es that are available in your region. • Region 1 : F or the United States, Canada, and Latin America, use 200, 200XL, or 200XLA cartridges. • Region 2 : For the Eur opean Union (E U), the Europe an Econom ic Area (E EA), and Swi tzerlan d, use 2 10, 21[...]
-
Page 14
Rep lac ing in k c artr id ges Make sur e you ha ve a new i nk cart ridge o r cartrid ges be fore you begi n. You mus t install ne w cart ri dges imm ediately after removing the old ones, or the ink remaining in the prin thead nozzles may dry out. 1 T urn on your pri nter. 2 Open the ink cartridge ac cess door. Warning—Pot ential D amage: Do not [...]
-
Page 15
Notes: • If Al ig n P rinte r appears on the p rinter d isplay, then touc h Con tin ue o r press OK , depen ding on your printer model. • Do not remov e the alignm ent page until pr inting is finis hed. Order ing p a p er an d other sup plies To order sup plies or to lo cate a dea ler near you, vis it our We b site at www.lexmark .com . Item Pa[...]
-
Page 16
Using the printer control pan el buttons and menus Us ing t h e pr in ter cont ro l pan el 1 2 3 4 5 6 7 Use To 1 Pow er • Turn the pr inter on a nd off. • Swit ch to Sl eep m ode . Note : When the printer is on, press to s witch to Sleep mode. Press and hold for three s econds to tur n off the printer. 2 Di sp la y Note : T he di sp la y is tu[...]
-
Page 17
Use To 8 Red i al Display the last n umber dialed. Press the left or right arrow bu tton to view the last five numbers dialed. 9 Pau s e Insert a three-second paus e in a fax number to wait for an ou tside line or get thr ough an automated a nswering system. Enter a pause onl y when you have already begun entering the number. 10 Di al T o ne Dial t[...]
-
Page 18
Changin g t he Sl ee p timeou t The Sleep timeout is the tim e it takes for th e printer to switch to Sleep mo d e when the printer is left idle. The Sleep featu re optim izes en ergy effici ency by reducing t he print er power consum ption. T o save the most ener gy, se lect the lowest Sl eep ti meout. 1 From the prin ter co n t r ol p a nel, n av[...]
-
Page 19
Set ting the se curi ty PIN of the prin ter To prev ent un authori zed chan ges in specif ic menu set tings, you c an set a sec urity PIN f or the pr inter. 1 From the prin ter co n t r ol p a nel, n avigate to: > Setup > OK > Securit y Setup > OK > Set Admi n PIN 2 Enter yo ur fou r ‑ digit PI N, and the n press OK . No te: Make s[...]
-
Page 20
Us ing s hor tcu ts What are shortc uts? A shortc ut is a way to quic kly accomplis h pri nting, copying , scanni ng, e ‑ mai ling, or faxin g tasks w ith the printer . You can c onfigure and save a set of frequent ly use d print er sett ings ava ilable f or a gi ven task and then assign a shortcut numbe r and shor tcut n ame to it . The short cu[...]
-
Page 21
Getti ng star ted During install ation, a l ink will be pr ovided for you t o create sh ortcuts. If you we re not able t o create your shortcuts during instal lation, the n you may c rea te the short cuts t hroug h your pri nter so ftwar e. Launching the s hortc uts pa ge usin g the pr inter sof tware Before you begi n, make sure : • Your printer[...]
-
Page 22
Usin g sh ortc uts o n the p rinte r Make sur e you ha ve created a shortcut. From the pri nter control p a nel, n avigate to: > Shortc uts > OK > selec t a shor tcut > OK or > > enter t he short cut num ber > OK Note: If you co nfigure d the sho rtcut to show the se ttings be fore r unning, then the setting s will appear on th[...]
-
Page 23
Using th e printer soft ware Mini mum sys tem req uirem e n ts The print er software requir es up to 50 0MB of f ree dis k space. Supp orted operat ing sys tems • Mic rosoft W indows 7 (SP1 ) • Mi cro sof t Wi nd ows Ser ver 2008 ( R2) • Mic ros oft W indows Se rver 2 003 (S P2 ) • Mic rosoft W indows Vi sta (SP2 ) • Mic rosoft W indows X[...]
-
Page 24
Printer sof tware Use t he To Lex ma r k TM Printer Hom e (refer red to as P rinter Home) • Launch appl ication s or progr ams. • Scan or e ‑ mail a photo or document. • Edit scanned documents. • Scan documents to PDF. • Adjust se ttings for the printer. • Order supplies. • Maint ain ink cartr idges . • Register the printer. • C[...]
-
Page 25
Us ing t h e Mac in tos h prin ter s o ftw are Launching the Pri nt di alog Use the Print dialo g to adjust t he print s ettings and schedu le pri nt jobs. Wi th a docume nt or photo open, c hoose File > Pr int . Launching an appli cation 1 From the Finde r , navigate to : Applica tions > select your printer f older 2 Do uble ‑ cli ck the a[...]
-
Page 26
Use To Printer R egi stration Register yo ur printer. Visit Lexmark SmartSol utions • Visit the S martSolutions Web site. • Choose your custom solutions . Note: Your pri nter ma y not come with th ese Web li nks, depend ing on the f eature s of the p rinter t hat yo u purcha sed. Find in g and inst all ing opt ional so ftware For Wind ow s use [...]
-
Page 27
Down load in g PCL and P S d rive rs ( Wi ndows only ) Univ ersal Print Dr ivers (PCL 5 em ulation, PC L XL emulati on, and PS emul ation) can be dow nload ed from our W eb site. You need t o searc h for yo ur pr inter m odel to view compatible driv ers. Rein s talli ng t he prin ter soft ware When you set up the printer using the ins tallation sof[...]
-
Page 28
3 Clic k Inst all , and then follow the instruct i ons on the comp u ter screen. For Macintos h users Note: To take advant age of the full f eatures of your print er, select t he custom install o ption, an d then select all packages listed. 1 Close a ll open applicat ions. 2 In ser t th e i nst a lla tio n sof twa r e CD . If the install ation di a[...]
-
Page 29
Loading paper an d original documents Lo a d ing th e paper tr ay Make s ure: • The printer is turned on. • You us e paper designe d for inkjet pr inters. • The pape r is no t used or dama ged. • You follo w the instruc tions that came w ith the special ty media. • The pape r does not buc kle whe n you adjus t the paper gui des. 1 Lift th[...]
-
Page 30
3 If you ar e load ing legal ‑ size paper, then squeeze the tab a nd pull to exte n d the tray. 4 Load t he pa per wit h the pri ntable sid e fac edown. 5 Adjust the pap er guides to rest aga inst the left, r ight, and b ott om edges of the pap er. No te: Make sure the paper is below the m aximum fill line lo cated on the edge of the paper tray. [...]
-
Page 31
6 Insert the tra y. No te: I f you extended the tray to accommodate l egal-size p a per, th en the tray stick s out fro m the front of the p rinte r when inse rted. 7 Fu lly extend t he exit bi n, and then f lip out the bin exte nder t o catch the pa per as it exits. Loa di ng va ri ous pa per ty pes Note: Diff erent pap er t ypes an d size s shoul[...]
-
Page 32
Lo ad up t o Make su re 100 sh eets of c oated paper 25 sheets of photo paper 25 shee ts of gl ossy p aper • The paper is loaded with the glossy or pr intabl e s ide face d own. If you are not sure which side is printable, then see the instructions that came with the paper. • The paper g uides rest aga inst the left, right, and bottom edges of [...]
-
Page 33
Lo ad up t o Make su re 25 shee ts of lab el s • You use full label sheets. Par t ial sheets (with areas exposed by missin g labels) may caus e labels to peel off during printing, resulting in a paper jam. • You l oad A4 ‑ or letter ‑ si z e labe l shee ts. • The labels are loaded with the pri ntable side face d own. • The top o f the l[...]
-
Page 34
Sav ing paper settings You can ad just the se tting s for your pri nt and copy jobs t o match the paper si ze and type you have loaded in the print er. 1 Fr om the print er control pa nel, pres s . 2 Adjust the settings as needed: • If you want to s et the pape r size, the n naviga te to: Setu p > OK > Pape r Se tu p > OK > Pape r Si [...]
-
Page 35
Lo adin g orig in al docu ment s in to the ADF Note: Make sure the pa per is below t he maximum f ill line loc a t ed on the edge of the paper guide. Overloadi ng the tray can c ause paper jams. 1 Adjus t the pape r guide s on the ADF input tra y to th e width of the original d ocument . 2 Load t he original doc ument fac eup and to p edge fir st, [...]
-
Page 36
Using diffe rent paper si zes and typ es For be st r esults, choo se a re com mended paper for a prin t job. Recomm ended paper br ands For e ‑ mails , received faxes, internal documents , and similar print jobs Si ze R ecomm ende d pa per Weight Set pape r type to Le tter Prin tWo rks 3 0% R ecycl ed Multipurpose Paper #00011 20 l b Pla in A4 UP[...]
-
Page 37
Paper an d specia lty media One ‑ s ided o r two ‑ si de d prin ti ng Rec omme nded paper Se t pape r typ e to Matte brochure T wo ‑ sided Inkjet matte br ochure papers for light ‑ or mod era te ‑ coverage printing: • Printworks Matte Photo Paper #004 71 • Paperworks I nkjet 2 ‑ sided Matte Coated 8. 5x11 32l b/120 g 60pk P/C: PPPJ [...]
-
Page 38
Using the printer software For Win dows user s 1 Wi th a document ope n, click File > Pri nt . 2 Clic k Pro pe rt ies , P refer ences , Option s , or Setup . 3 Clic k the Pape r/Finis hing tab, and t hen select the size or type of paper t o use, a nd the paper sourc e or tra y. 4 Clic k OK . For M acint osh u sers 1 Wi th a doc ument o pen, c ho[...]
-
Page 39
For M aci ntosh users 1 Fr om the Apple menu, na viga te to: Sy st em P r ef eren ce s > Prin t & Fa x > sel ect your pri nter 2 Navi gate to: Open Print Queu e > Pri nter Setu p > Driver tab or Pr int er Se tu p > Insta llable Options 3 Fr om the T wo ‑ Sided Printing Dry Ti me pop ‑ up menu, choos e a dry t ime set ting. No[...]
-
Page 40
Prin ting Tip s for prin ting • Make su re the e xit bin is fully ext ended an d the bin ext ender is f lipped out. • Use the appr opri ate paper for your print job. • Sel ect a hi gher pri nt quality f or bett er p rints. • Make sure there is enough i nk in the ink cartridges. • Remove each sheet as it is printed when p rinti ng p hotos [...]
-
Page 41
Printing us ing ad vance d color op tions Color printing is enable d by default . T o optimi ze prin t colors for a special print job, us e Color Pre ference and A dvanced Col or O pti on s. For Windows u sers 1 With a document o pen, c lick File > Prin t . 2 Clic k Pro pe rt ies , P refer ences , Option s , or Setup . 3 Navi gate to: Quality ta[...]
-
Page 42
• To pr event smud gi ng when print ing p hotos, r emove eac h ph oto as i t exits the printe r, and t hen le t it dry befo re stacking . For Windows u sers 1 With a document o pen, c lick File > Prin t . 2 Clic k Pro pe rt ies , P refer ences , Option s , or Setup . 3 Navi gate to: Layo ut tab > Copies area 4 Ent er the num ber o f copies [...]
-
Page 43
5 Fr om the P rint er po p ‑ up menu, c hoose your pri nter. 6 Fr om the p rint op tions po p-up me nu, cho ose P ape r H a n dli n g . 7 Fr om the P age Or der p op ‑ up menu, choo se a pa ge order : • To print the f irst page fir st, choose Normal . • To print the l ast page fir s t, choose Reverse . 8 Clic k Pri n t . Printing m ulti ple[...]
-
Page 44
Printing do cument s from a me mory ca rd or flash dri ve Notes: • The pr inter re ads only one m emor y device at a tim e. • Mak e sure the me mory dev ice contain s docum ent files that are support ed by the prin ter. 1 Ins ert a mem ory c ar d or fl ash drive. Whe n the pri nter det ects the memor y devic e, Memo ry C ar d Detec te d or Stor[...]
-
Page 45
3 Fr om the P aper Siz e pop ‑ up m enu, choos e your en velope si ze. If no si ze ma tches t he en velope size, then set a cust om siz e. 4 Sel ect an orientat ion, and t hen click OK . 5 Fr om the m enu bar , choose File > Pri n t . 6 Fr om the P rint er po p ‑ up menu, c hoose your pri nter. 7 Clic k Pri n t . Notes: • Mo st enve lopes [...]
-
Page 46
6 Fr om the P rint er po p ‑ up menu, c hoose your pri nter. 7 Fr om the p rint op tion s pop ‑ up menu, choo se Q ualit y & Medi a . 8 Fr om the P aper Type pop ‑ up men u, choose Labels . 9 Fr om the Pr int Quality menu, choose a p rint qua lity other than Quick Print or Draf t. 10 C lick Pr in t . Print ing on c ustom ‑ size pa per F[...]
-
Page 47
Working with ph otos Supported mem ory cards a nd file ty pes Memory card File type • Secure Digi tal (S D) • Secure Digi tal High Cap acity (SDHC ) • Micr o Secu re Digita l (wit h ada pter) (Mi cro SD ) • Mini Se cure Dig ital (with adapt er) (Mini SD) • MultiMedia C ard (MMC) • Reduce d Size Mu ltiMe dia Card (w ith ada pter) (RS ‑[...]
-
Page 48
Inserting a memory card Inserting a flash drive Note s: • Inse rt the card with the brand nam e label f acing up. • Ma ke sure an y arrows on the card po int towar d the pr inter. • If necessary , conne ct the memory card to the adapter that cam e wi t h i t . • Ma ke sure tha t the mem ory card insert ed is suppor ted by the printer. For m[...]
-
Page 49
Print ing photos from a mem ory card or fl ash driv e 1 L oad phot o pa per. 2 Ins ert a mem ory car d, fla sh driv e, or di gital ca mera s et to mass s torage mode. If imag e files and doc ument f iles are st ored in t he memo ry devic e, then pre ss the left or right a rrow but ton to sel ect Phot os , and then press OK . No te: Only files with [...]
-
Page 50
W arning —P otent ia l Dama ge: Do not touch a ny open conn ector, the memory device, or the pri nter i n the areas shown while acti vely print ing, re ading , or writ ing fr om the memo ry devi ce. A los s of data can o ccur. 3 If the PictBri dge co nnection is s uc cessful, th en the fol lowing messa ge appears on the dis play: Us e Pi ct Brid [...]
-
Page 51
To ret urn to single- sided print ing, r epeat ste ps 1 and 2 , and the n nav igate to : Lay out tab > Pri nt on Both S ides (Duplex) area > s elect Print on one side only For Macintos h users 1 Wi th a docume nt o pen, c hoose File > Page Se tu p . 2 Fr om the Pag e Setup dialog, s et the pr inter, p aper s ize, an d ori entation. 3 Clic [...]
-
Page 52
Settin g the duple x printing d ry tim e Using the control panel 1 From the prin ter co n t r ol p a nel, n avigate to: > Setup > OK > Pri nt M ode S et up > OK > Pa ge D ry Tim e > OK 2 Pres s the up o r down ar row but ton to scroll to the dry time s etting yo u want, and t hen pre ss OK . Note: The dry ti me vari es dependi ng [...]
-
Page 53
Ma na gi ng p ri nt jobs Finding the p rint qu eue for your p rinte r A print qu eue repr esent s the pr inter that is conne cted to your com puter. The print que ue name is usually the print er model or the printer nickname as signed w hen inst alling or addin g th e printer. Note: Several p rint queu es may a ppear i n the list depend ing on h ow[...]
-
Page 54
Se tt ing yo ur pri nt er a s t he def aul t pr in ter Your printer shou ld be selected automatic ally from the Pr in t dialo g when you s end a print j ob. If yo u have to manua lly select your printer, then it is no t the defaul t printer. To set the d efault pr inter: For Windows u sers 1 Click , or click Start and then c lick Run . 2 In the St [...]
-
Page 55
Pausing print jobs For Windows u sers 1 Click , or click Start and then c lick Run . 2 In the St art Sear ch or Run box, t ype cont rol prin te rs . 3 Press Ent e r , or click OK . The printers folder opens. 4 Right ‑ click the p rinter, and then s elect Open or See what 's pr inting . 5 Pause th e print j ob: • If you want to pa use a pa [...]
-
Page 56
3 Resume the print job: • If you want to r esume a particular prin t job, th en choose the docume nt nam e, and then clic k Re sume . • If you want to r esume a ll print jobs in the queu e, then c lick Res ume Printer or Start J obs . Cancel ing pri nt jobs To cance l a prin t job from the print er cont rol pa nel, press , an d then p ress OK .[...]
-
Page 57
Su pp or te d pr in ter s LexPrint enables your mob ile devic e to commun icate wit h Lexmar k printer s found o n the sam e network. • For se lect print er model s that sup port Direc t Image a nd Zero conf or Bonjou r, you can print direct ly from your mob ile device to the pr inter w ithout us ing LexP rint Li stene r. To chec k if your pr int[...]
-
Page 58
Cop ying ADF S canner glass Use the ADF f or multiple ‑ page document s. Note : The ADF is a vai lable o nly i n se lec t pri nter mod els. I f you purchased a printer without an ADF, the n l oad original documents or photos on the sc anner glass. Use th e sc anne r gl ass fo r sing le pa ges, smal l item s (s uch as postcards or photos), trans p[...]
-
Page 59
5 Fr om the C opy menu sc reen, press the up or down arr ow bu tton to s croll to the option yo u wa nt to set, and then press the le ft or right ar row button to s croll to the s etting you wa nt. If necessa ry, press OK to make a selection. 6 Sel ect the c opy mode : • Pr ess to sw it ch to co l or m o de . • Pr ess to switch to b lack ‑ an[...]
-
Page 60
Adj ustin g copy qualit y 1 Load pape r. 2 Load t he orig inal doc ument f aceup int o the ADF o r fa cedown on t he scanner glass. 3 From the prin ter co n t r ol p a nel, n avigate to: > Co py > OK > Quality 4 Press the lef t or right a rrow butto n to set the copy qu ality. 5 Fr om the Copy m enu, sel ect Conte nt Type . 6 Press the lef[...]
-
Page 61
4 Press the lef t or right a rrow butto n to select the number of co pies. 5 Pres s the up o r down ar row button until Co llat e a ppears . 6 Press the lef t or righ t arrow butto n to scrol l to On , and t hen press . Placing separator sheets between copies A separa tor she et is a sheet of paper placed be tween pages, c opies, or j obs based on [...]
-
Page 62
Removi ng the ba ckgroun d of a c opy The Back ground Removal f eature ad justs the amo unt of b ackground visible o n a copy. 1 Load pape r. 2 Load t he orig inal doc ument f aceup int o the ADF o r fa cedown on t he scanner glass. 3 From the prin ter co n t r ol p a nel, n avigate to: > Co py > OK > Back ground Remo val 4 Pres s the le f[...]
-
Page 63
3 From the prin ter co n t r ol p a nel, n avigate to: > Co py > OK > Cop ies 4 Press the lef t or right a rrow butto n to select the number of co pies. 5 Fr om the C opy menu sc reen, press the up or down arr ow bu tton to s croll to the option yo u wa nt to set, and then press the le ft or right ar row button to s croll to the s etting y[...]
-
Page 64
Scanning ADF S canner glass Use the ADF f or multiple ‑ page document s. Note : The ADF is a vai lable o nly i n se lec t pri nter mod els. I f you purchased a printer without an ADF, the n l oad original documents or photos on the sc anner glass. Use th e sc anne r gl ass fo r sing le pa ges, smal l item s (s uch as postcards or photos), trans p[...]
-
Page 65
3 Pres s the up o r down ar row but ton to scroll to th e scan opt ion you w ant t o set, and then press the le ft or rig ht arrow button to scroll t o the s etting you w ant. Set the colo r, qualit y, origin al image size, and othe r scan options . If neces sary, pre ss OK each time you make a sel ection. 4 Press . S can ni n g t o a net wo rk c o[...]
-
Page 66
5 Set t he colo r, qual ity, orig inal imag e si ze, and ot her s can options . If necessary, pr ess OK each time you make a sel ection. 6 Press . Note: For Macint osh use rs, you may need to en able sc anni ng to your computer t hrough Im age Capt ure t o scan docum ents usin g a networ k pri nter and s ave t he scan ou tput. Adding a netw ork fol[...]
-
Page 67
Sca nning photos For Wind ow s use rs 1 Load t he ph oto or photo s facedo wn on the scanner glass. 2 Clic k or Start . 3 Clic k All Pr ograms or Pr og ra ms , and then s elect the print er program folder from the list. 4 Navi gate to: Pr inter Home > select your printe r > Scan > Adv an ce d sc a n 5 Fr om the S can Sour ce list, sele ct [...]
-
Page 68
Sc ann ing d ire ctly fr om t he pri nt er c ont rol p ane l 1 Load t he ph oto or photo s facedo wn on the scanner glass. No te: If you h ave s heet s loaded on the ADF and photo s loaded on the scanner glass, then the sheets o n the ADF will b e scanned. Make s ure to clear the ADF if you want to scan the photos on t he scann er glass. 2 From the[...]
-
Page 69
For Ma cint osh use rs 1 Load t he orig inal doc ument f aceup int o the ADF o r fa cedown on t he scanner glass. 2 Fr om the Appli catio ns folder in the Fin der, la unch the applic ation you want t o use. Note s: • Use any applic ation that suppo rts yo ur pr inter an d lets you wor k with the O CR so ftware, A BBYY FineRe ader. • If the O CR[...]
-
Page 70
For Ma cint osh use rs 1 Load a n ori ginal doc ument faceup in to the ADF or fac edown on t he s canner glass . 2 Fr om the Appli catio ns folder in the Fin der, la unch the applic ation you want t o use. No te: Use any appl ication t hat sup ports bot h your pri nter and an e ‑ mailing option, suc h as Imag e Capture. 3 Fr om the l ist of de vi[...]
-
Page 71
Sca nning FAQ How can I i mprove the qu ality of a sca n? • Make su re your ori ginal do cuments are in good c ond ition. • Make su re the applica tion that receive s the s canned doc ument is appropr iate. Fo r exam ple, if you are s canning a photo to edit it, t hen ma ke sure you c hoose a photo editing appli catio n to receiv e the sc an. I[...]
-
Page 72
E-mailing You can us e your printer to se nd e-mail to one o r more recipi ents without usi ng a computer prov ided you have set up the scan to e-mail task thro ugh shortcuts. For more inf o rm ation, see the sectio n on shortc u ts in th e Use r' s G uid e . Before you c an send e-mail using the print er c ontrol panel, yo u mu st first confi[...]
-
Page 73
Creating an e-mail contact li st Crea ting an e ‑ mail contac t li st using th e compu ter For Windows u sers 1 Click or Start . 2 Clic k All Pr ograms or Pr og ra ms , and then s elect the print er program folder from the list. 3 Navi gate to: Pr inter Home > select your printe r > Fax > Edit contact list > Selec t from pho ne boo k [...]
-
Page 74
Sen ding e -mail ADF S canner glass Use the ADF f or multiple ‑ page document s. Note : The ADF is a vai lable o nly i n se lec t pri nter mod els. I f you purchased a printer without an ADF, the n l oad original documents or photos on the sc anner glass. Use th e sc anne r gl ass fo r sing le pa ges, smal l item s (s uch as postcards or photos),[...]
-
Page 75
Canceling an e ‑ mail Do one or mor e of t he follo wing: • From t he printer control pa nel, press , and then press OK . • If you ar e sendi ng the e ‑ mail using th e printer software, then cancel the e-mail from the soft ware dialog. E-ma iling 75[...]
-
Page 76
Faxi ng CAUTION— POTENTIA L INJURY: T o reduce r isk of fi re, use o nly the t elecommu nicati ons (R J ‑ 11 ) co rd pr ovid ed with t his produc t or a UL List ed 26 AWG o r larger repla cement when connecting this produc t to the public switc hed telepho ne netwo rk. CAUTION—SHOC K HAZARD : Do not use the fax f eature du ring a li gh tning [...]
-
Page 77
Setup 2: Printer is sharing the line with an answer ing machine Con nect ed to th e same t elep hone w all j ack To con nect: 1 Connect th e cable from the wall ja ck to the po rt of th e printe r. 2 Remove the protective plug from the port of the printer , and then connect th e answering mach i ne to th e port. Conne cted to d iffere nt wall jac k[...]
-
Page 78
To con nect: Conne ct the cable f rom the wal l jack to the port of th e printer. Ti ps fo r t h is s et up : • If you have only o ne telephone number on your line, then yo u need to set the pr i nter to receive faxes au tomatically (A uto Ans wer On) . • Set the printer to pick up calls two rings after the answering machine. For example, if th[...]
-
Page 79
Ti ps fo r t h is s et up : • This s etup wo rks best if you subs cribe t o a distinctive ring service. If you hav e distinct ive ri ng servic e, then m ake sure that you set th e cor rect rin g pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes autom aticall y. • If you have only one[...]
-
Page 80
To install a filter for the printer: 1 Connect the line port of the DSL filter to the wall jack. 2 Connec t a te lephone cable from t he port on t he back of the print er to the phone port o n the DSL filter . 3 To c ontinue using a c omput er for Inte rnet access , connect the c omput er to the DS L HP N port on t he DSL f ilter. 4 To connect a te[...]
-
Page 81
Tips f or this setup: • T o m ak e su r e th a t th e p h on e p o rt o n t h e V o IP a da p te r is ac tive, plug an analo g telephone into t he phone por t, and then l isten fo r a dial t one. If you hear a dia l tone, then t he port is active . • If you nee d two ph one po rts f or your dev ices bu t do not w ant to pay ex tra, t hen do n o[...]
-
Page 82
Ti ps fo r t h is s et up : • To m ake su re that th e phon e port on the cable mode m is active, plug a n ana log t elepho ne into the pho ne po rt, an d then l isten fo r a dial t one. If you hear a dia l tone, then t he port is active . • If you nee d two ph one po rts f or your dev ices bu t do not w ant to pay ex tra, t hen do n ot plug th[...]
-
Page 83
Scenar io 5: Country ‑ or r egi on ‑ spe ci fi c s et u p Differ ent count ries or r egions ha ve different t ypes o f telepho ne wall jacks. The s tandard wall jack ad opte d by most countries or regi o ns is the Regis tered Jack-11 (RJ-11). You need to ha v e an RJ ‑ 11 plug , or a telephon e cabl e that ha s an RJ ‑ 11 connec tor, so you[...]
-
Page 84
3 If you want t o connect anot her de vice (t elepho ne or answ ering m achine) to the s ame w all jack, a nd if the device has a non ‑ RJ 11 co nnecto r, th en connec t it d i rect ly to t he wal l ja ck. Notes: • Do not rem ove the wrap plug from the po rt of the print er. • The pr inter m ay not come wi th an RJ- 11 adapte r in your count [...]
-
Page 85
E X T L IN E To con nect: Conne ct the cable f rom the wal l jack to the port of th e printer. Con ne ctin g th e p rin ter to a wal l ja ck in G erm any The Ger man wall jack has two ki nds of ports. T he N por ts are fo r fax machi nes, mod ems, and answeri ng mac hines. The F port is f or tele p hones. NF N Fax ing 85[...]
-
Page 86
Connec t the printer to any of the N po rts. To con nect: 1 Conne ct one end of a telep hone cabl e to the por t of the printe r. 2 Connect the other end of t h e ca b le to the RJ ‑ 11 adapter, and t hen connect the ad apter to an N port. 3 If you want t o connect a t elephon e and an swering mac hine to the same w all jack, t hen connec t the d[...]
-
Page 87
3 Press the ar r ow butt ons to scroll to F ax Numbe r , and then pr ess OK . 4 Ent er you r fax number or your telep hone nu mber, and then pr ess OK . Setting the fax footer From the pri nter control p a nel, n avigate to: > Setup > OK > Fax Set u p > OK > Ringi ng and Ans wering > OK > Fax Foot er > OK > On > OK Set[...]
-
Page 88
Fro m her e You c an Ringing and Answering • Set the pr inter to recei ve faxes automatically or m anually. Turn Aut o An sw er t o O n or Of f. • Adjust the ringing vol ume. • Set the nu mber o f ri ngs. This is import ant if y ou cho ose t o re ceive faxes autom atically (Au to Answer O n). • Set the di stinctive ring. I f you subs cribe [...]
-
Page 89
Using the Pri n ter Se ttings in Macintosh 1 From the Applications folder in the Finder, o r from the Finder d esktop , do uble-c li ck the printer folder. 2 Do uble-click P rint er Se ttin gs . 3 Conf igure t he fax se tting s using the prin ter sof tware . To view the hel p information f or the fax so ftware, click Help or ? . Cre a ting a c onta[...]
-
Page 90
Creating a cont act lis t using t he fax softw are For Windows u sers 1 Click or Start . 2 Clic k All Pr ograms or Pr og ra ms , and then s elect the print er program folder from the list. 3 Navi gate to: Pr inter Home > select your printe r > Fax > Edit contact list The Cont acts tab of the Print er Setup Utility opens . 4 Clic k Selec t [...]
-
Page 91
Sen ding f axes ADF S canner glass Use the ADF f or multiple ‑ page document s. Note : The ADF is a vai lable o nly i n se lec t pri nter mod els. I f you purchased a printer without an ADF, the n l oad original documents or photos on the sc anner glass. Use th e sc anne r gl ass fo r sing le pa ges, smal l item s (s uch as postcards or photos), [...]
-
Page 92
4 Press the Colo r/Bl ack bu tton to select a c olor or black ‑ and ‑ wh ite f ax . 5 Press to start the fax job. Warning—P otential Dama ge: Do no t touch th e cables or the and ports whi le activel y sending a fax. Tip: • You can se nd a br oadcast fax to up t o 30 r e c ipie nts. Sending f axes using t he computer For Windows u sers 1 Wi[...]
-
Page 93
• If you ha ve se t the print er to rece ive fax es automa tical ly (Auto An swer On) , the n load pape r in t he pri nter. Receiv ing fax es automat ically 1 Make sure that Auto Answer is on: From the pri nter control p a nel, n avigate to: > Setup > OK > Fax Set u p > OK > Ringi ng and Ans wering > OK > Aut o Answe r > O[...]
-
Page 94
Fax in g FAQ If I sk ippe d the fax s etup i nit ially, do I need to run th e insta ller aga in to se t up the fa x? You do n ot need t o run t he install er again. You ca n set up and configur e the fax throug h the f ax softwa re that was instal led with th e printer sof tware. 1 Conne ct t he printer to the t elephon e line. F or more infor mati[...]
-
Page 95
What is my dialing pre fix ? The dialin g prefi x is the num ber o r ser ies of numb ers that you pre ss befo re you can dial the ac tual f ax numbe r or telephon e number. If the printe r is in an office se tting or in a privat e branch exch ange, then this can be a specific number that you n eed to pre ss so yo u can mak e a call outside the of f[...]
-
Page 96
How can I check t he dial tone? A dial tone lets yo u know if the telephone li ne is workin g or if the print er is pr operl y connec ted to the telephone l ine. If you encounter pr oblem s sending and rec eiving faxes, t hen make sure you can hear a dial tone on th e line and throug h the pr i nter. Make sure the telephone line and the wall j ac k[...]
-
Page 97
How ca n I m ake s ure tha t fax call s go to the pri nter a nd vo ice call s g o to t he answe ring machine ? To make s ure the printer pi cks up incom i ng fa xes, set Auto Answer to On, an d then set the pr inter to pick u p after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after fou[...]
-
Page 98
4 Enter the time yo u want to send the fax, a nd then press OK . 5 Press to star t scan ning the doc ument and to sa ve the sched uled fax. The printer send s the fax at the designated time. Do not turn off the print er or unplug i t from t he telephone line before the scheduled tim e. How do I s end a fa x usin g a phone ca lling card? 1 Press Dia[...]
-
Page 99
Ho w do I pr int a f ax o n bo t h s ide s o f t he pa per ? 1 From the prin ter co n t r ol p a nel, n avigate to: > Setup > OK > Fax Set u p > OK > 2 ‑ S ide d F ax e s > OK 2 Pres s the arr ow but tons to selec t a settin g: • Never —Incoming f axes ar e neve r print ed on bot h si des of th e paper regardl ess of the 2 ?[...]
-
Page 100
Can I retriev e fai l ed f axes? The prin ter saves an incomi n g fax i n the printer memo ry before it prints th e fax. If the prin ter runs out of ink o r runs out o f paper, then the pr inter will autom atically pr int the fax after the error is res olved. If a fax was not sent or rec eived due to p ower los s, then th e pri nter will aut omatic[...]
-
Page 101
Networking Inst all ing th e prin ter on a wir eles s net work Wireles s network compa tibilit y Your pr inter may c ontain an IE EE 80 2.11b, IEEE 802. 11g, or IEEE 802.11 n wirel ess pri nt serv er. Your pr inter is c ompa tible with IEEE 802.11 b/g/n rou ters that ar e Wi-Fi certified . Note: If your pri nter has an IE EE 802.1 1g wire less prin[...]
-
Page 102
A valid WE P key has: • Exactl y 10 or 26 hexadecima l charact ers. Hexad ecimal chara cters are A–F, a–f , and 0 –9. or • Exac tly 5 or 13 ASCII c haracte rs. AS CII charac ters ar e letter s, numbers, punc tuation, and sym bols foun d on a keyboard. No Security It is not r ecommended t o use no s ecurit y at al l on a hom e wireless net[...]
-
Page 103
If your w irel ess netw ork is not using security, t hen you wil l not have a securi ty key. Note: If you do no t know the S SID o f the network that your c omputer is connect ed to, then launch t he wireles s utility of the computer network adapt er and l ook f or the network name. If you c annot find the SSID or the secur ity inform ation f or yo[...]
-
Page 104
Encr yptio n Check the encryption method used on your network. No te: S ome authentica tion types ma y be available only in select pr inter models o r operat ing systems . Auth e ntic a tio n ty p e En cr ypt ion m eth od Open Mode • None • WEP Share d Mode WEP WPA Per sonal TKI P WPA2 ‑ Personal • TKI P • AES WPA2 ‑ Enterp rise • TKI[...]
-
Page 105
For Macintos h users 1 Close a ll open applications . 2 Ins ert the Sof tware and Docu mentat ion CD . If the install ation di alog does not appear after a min ute, then click the C D icon o n the desktop. 3 Do uble- clic k the software installer p ac k age, and then follow the instructions on the computer screen. No te: Select W ir el ess co n ne [...]
-
Page 106
In dica tor li ght Pr in ter s ta tus Off • The pr inter is turned of f or is powering up. • The printer is not connected to an E thernet or a wireless network and is in Sleep mode. • The pr inter has not been c onfigured f or an E thernet or a wireless network. • The pr inter is configured fo r an ad hoc connec tion, but it i s not current[...]
-
Page 107
For Mac intos h users Select Ot h er W i re l es s Ne tw or k from the lis t, and then c lick Con tin ue . b Enter the d etails about your wireles s networ k. Note: Your W EP, WPA, or WPA2 key m ay be obtained from the b ottom of the b o x, the d ocumenta tion that came w ith the box, o r from the b ox Web page. If yo u have alre ady changed t he k[...]
-
Page 108
Advan ced wireless setup Adding a printer to an e xisti ng ad hoc wirele ss net work Before you begi n, make sure : • Your wireless n etwork adapt er is pro perly at tached t o your c omput er and is w orking. • The ad ho c wirele ss network tha t the print er will conn ect to is availab le. For more info rmation on creating an ad hoc w irel es[...]
-
Page 109
Configuri ng Wi ‑ F i Prote cted Setup m anually Note: Make sure your ac cess po int (w ireles s ro uter) i s Wi ‑ Fi Prot ect ed Setup ( WPS) certifie d. For m ore i nformat ion, see the Us er ’s Gui de . If your p rinter or devic e has not yet bee n config ured for w ir eless conn ection and yo u want to con figure it using WPS , then push [...]
-
Page 110
PEAP • RADIUS user name • RADIUS passw ord • CA certif icate EAP ‑ TL S • RADIUS user name • CA certif icate • Sign ed certificat e EAP ‑ TTLS • Appro priate inner authent icatio n • RADIUS user name • RADIUS passw ord • CA certif icate Conf iguri ng 802. 1X Aut hentic ation The info rma tion to c omplete i s dependent on th[...]
-
Page 111
• The netwo rk mask of the net work where the pr inter will be us ed • The name of the domain where the printer will reside • The hostname of the printer • Any secur ity informati on required for authentica tion to the netwo rk Note: Make sure yo u have an E thernet c able to con nect the pr in ter to the network, and a n availa b le por t,[...]
-
Page 112
Perf orm ing net work man agement tasks Switching betwe en USB, Et hernet, and wi reless co nnecti ons (Windo ws only) You ca n c hange the w ay you access your pr inter, depen ding on your needs. T he fol lowing proc edures assume th at you have config ured your print er for one type of connect ion and that the printe r drive rs are installed on t[...]
-
Page 113
3 Select the USB printer. See “Selecting a printer” on page 113. If th e prin te r is cu rrentl y s et up for wi rele ss 1 Attac h a USB c able to the c omput er and to th e printer . 2 Wa it a mom ent for Windows to locat e the driv er and f inish setting up the pr inter. 3 Select the USB printer. See “Selecting a printer” on page 113. Not[...]
-
Page 114
Switching betwe en USB, Et hernet, and wi reless connecti ons (Maci ntosh on ly) You can change the way you a ccess your print er depending on your needs. The follo wing procedur es assum e that you have c onfigured your pri nter f or one t ype o f connec tion and tha t the driver s are inst al led on th e comput er. See re lated topics o n troubl [...]
-
Page 115
3 Add t he pr inter ( see “Add t he print er” on pa ge 1 15). 4 A se cond print queue will be cre ated. Remo ve the Et hernet q ueue if you do n ot wan t to switch bac k to acc essin g the pr inter o ver an E thernet connect ion. If th e prin te r is cu rrentl y s et up for wi rele ss 1 Attac h a USB c able to the c omput er and to th e printer[...]
-
Page 116
3 From the Printer Lis t dialog, choose th e printer you want to use, a nd then click Add . 4 Fr om the Pr inter Bro wser , select your prin ter, and t hen click Add . Sharing a printer in a Wind ows enviro nment 1 Prepare the comput er s to s h are the printer : a Make al l comput ers print ing to the print er acc essibl e through Netw ork Ne ighb[...]
-
Page 117
3 Sel ect onl y on e of the fo llowing: • Shari ng your prin ter with M ac OS X users —Let other M acintos h c omputer s on t he netw ork that use Ma c OS X ver sion 10 .4 or later us e any pri nter conne cted t o your M acintosh c omput er. • Shari ng your prin ter with W i ndows us ers —Let W indows com pute rs on the network use an y pri[...]
-
Page 118
Not es: – To obtain the IP a ddress of the access point, s ee the d ocument ation that came with it or c ontact your system suppo rt person. – If you ar e using a pr oxy server, the n tem porarily di sable it to lo ad the Web p age correctly. 2 Ent er the us er na me and pa ssword for the acces s poin t when p rompted . Note: The WEP key or WPA[...]
-
Page 119
Charact ers Secu ri ty typ e Exactly 10 or 26 hexadecimal chara cters or E xac t ly 5 o r 13 ASC II c ha rac t ers WEP Exactly 64 hex adecimal characters or From 8 to 63 ASCII characte rs WPA or WP A2 Note s: – Hexa decimal charac ters are A –F, a–f, and 0 –9. – AS CII character s are letter s, numbers, and symbols found on a k eyboard . [...]
-
Page 120
• The ne twork is connec ted to th e Internet thro ugh a DS L or cable modem. Internet Sce nari o 2: Wir eless netwo rk w ith Inte rnet acces s • All c omputers and printer s connect t o the network us ing a wireless access point or wireless router. • The w ireless access point c onnects t he netw ork to the Int ernet t hroug h a DSL or cable[...]
-
Page 121
Sce nari o 4: Co mput er co nnected wi reless ly to a pri nter with out I nte rnet acces s • A co mputer is directly c onnecte d to a p rinter withou t going th rough a wireless r outer. • This conf igura tion is refer red to as an ad hoc ne twork . • The ne twork ha s no conn ection to the Int ernet. Note: Most co mputers can co nnect to onl[...]
-
Page 122
2 Fi rmly p lug the squar e end o f the US B cable into t he back of the pri nter. 3 Firmly plug the rectangular end of the USB cab l e into the U SB port of the computer . 4 Follow the instr uctions on the computer screen. How are inf rastru cture and ad hoc network s differen t? Wi reless n etwork s ca n operat e in on e of tw o mod es: inf rastr[...]
-
Page 123
Infr astruc ture Ad h oc Speed Usually faster Usuall y slower Require ments for a ll devi ces Unique IP address for each device Yes Y es Mode set to Infrastructure m ode Ad hoc mode Same S SID Yes, i ncluding the access point Yes Same channel Yes, in cl uding the access point Yes We re commend s ettin g up a netwo rk in infr astructure mode u sing [...]
-
Page 124
How can I i mprove wireless sig nal strength? A common reason wireless printers fail to communicate over a network is poo r wireless sig nal quality. If the signal is too weak , too distorte d, or blocked by an object , it cannot carry inf orm ation betwee n the access poi nt and the printe r. To determin e if the print er is receiving a str ong si[...]
-
Page 125
How can I m ake sure my com puter and printer are con nected t o the s ame wireles s network? If the printer is not o n the same wirel ess network a s the computer, th en you will no t be able to pr int wireless ly. The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network. For Wind ow[...]
-
Page 126
In Mac OS X versio n 10.4 or ea rlier 1 From the Finde r , navigate to : Applica tions > Int e rne t Co nn ec t > AirPort The SSID of the network that the computer is connected to is displayed in the Network menu. 2 Write down the SSID. For Macinto sh users w ith an acce ss point 1 T ype the IP address o f the ac cess poi nt in the address f [...]
-
Page 127
While it is poss ible to change the MAC address of a network de vice, it is not co mmon pr actic e to do so. F or this r eason, MAC addresses are considered permanent. IP addresses are easily changed, so MAC addresses are a more reliable method of i dent ifyin g a spec ific dev ice on a net work. Router s with security c apabil ities may a llow fil[...]
-
Page 128
• If you are usi ng an AirPort b ase stat ion, th en the MAC address may be referred to as Ai r Port ID , and M AC addres s filter ing may b e accessed through MAC Address Access Control . What is an IP address? An IP addres s i s a unique number used by de vices (suc h as a w i reless printer, co mputer, or ac cess point (wi reless router)) on a[...]
-
Page 129
Locating the printer IP address • From th e p rin ter, print a net work setup pa ge. In the TCP/IP s ection, look for Ad dr ess . • View the p rinter settin gs. From the pri nter control p a nel, n avigate to: > Setup > OK > Netw or k Setup > OK > W ir eless 802. 11 b /g/ n > OK > Networ k Connec tio n Setup > OK > TC[...]
-
Page 130
Using the Embedded Web Ser v er The Em bedded W eb Server lets you v iew and r emotely c ustom ize print er se ttings e ven when you ar e not physical ly near the printer. Yo u can als o view r eports on print er act ivitie s, monitor and o rder print er suppli es onl ine, contac t custome r suppo rt, an d download update s for your print er. The E[...]
-
Page 131
Cus tomizi ng prin ter sett in gs 1 Fr om the n avig ation pa ne, se lect Se ttin gs . 2 Do one of the fo llowing : Click To General Settings View and cus tomize general pr inter settings. Copy Settings View and cus tomize settings f or making copies. Note : T his feature may not appear in the Embedded W eb Server, depending on you r printer model.[...]
-
Page 132
Click To Device Management Allow the Emb edded Web Ser v er to collect da ta from the printer. 3 Clic k Submit to save, or click Reset Form t o discard t he new se ttings. Using the Em bedded W eb Serv er 132[...]
-
Page 133
Maintaining the printer Ma inta in ing in k cartr id ges In additio n to the foll o wi n g ta s ks th at you can perf orm, your printer p erf orms automati c maintenance cyc les if it is plugged in to a pro perly grounded, working elec trical ou tlet. It will br iefly come out of Sleep mode or will t emporaril y turn on if it is turned off. Ch ec k[...]
-
Page 134
Clea ning the pri nthead noz zles If you have not been using the printer fo r a long period, the n yo u may need to clean the print head nozzles to improve the qual ity of you r print s. Keep yo ur printe r plug ged to a pro perly grounded, wo rking elect rical o utlet to allow it to perfo r m au tomatic main tenance cycles . Notes: • Cleani ng t[...]
-
Page 135
Cleaning the scanner glass Clea n the scanne r g lass and ot her related pa rt s when ve rtical s tre aks appear o n your printed p ag es or when you see mark s or smu dges on such parts. 1 Dam pen a clean, lint ‑ free cloth wit h water. 2 Gent ly wipe c lean th e scanner glass and other relat ed p arts. 1 Ba ck ing materi al 2 S canner glass 3 A[...]
-
Page 136
• Store the used ink cartridges in a bo x with the nozzles faceup. • Av oid s evere ja rrin g move ments. • If availab le, use the orig inal pac kaging of the print er wit h the neede d padding to keep t he printer pro tected dur ing transp ort. Maintaini ng th e printer 136[...]
-
Page 137
Troubleshooting Before you t r o ublesh oot Use this checklist to so l ve most printer p r oblems: • Make su re the power c ord is pl ugged into the pr inter and into a pr operl y ground ed, workin g ele ctrical out let. • Make sure th e printer is tu r ned o n . • Make s u re the p rinter is sec urely conn ected to the co mputer, print ser v[...]
-
Page 138
Incorrec t language a ppe ars on th e displa y If the "Before you trou b leshoot " c hecklist does not solve the pr o blem, then try one or more of th e f ollowing: C HANGE THE LA N GUA GE USING THE PRINTER MEN U S 1 Fr om the pr inter c ontro l panel, nav igate to: > Setup > OK > Device Setup > OK > La nguage > OK 2 Pre[...]
-
Page 139
Print j ob does not print or is mis sing p ages If the "Before you trou b leshoot " c hecklist does not solve the pr o blem, then try one or more of th e f ollowing: M AKE SU RE THE IN K CART RID GE S ARE IN SER TE D CORRECTLY 1 Turn the printer on, and then open the in k cartridge access door. 2 Make sure the cartridges are inserted corr[...]
-
Page 140
3 Firmly plug the rectangular end of the USB cable in to the U SB port of th e computer. The USB po rt is m ark ed wi th . Note: If you co ntinue to have problem s, then try another U SB po rt on the c omputer. Y ou may hav e connec ted to a defe ctive po rt. R EMOV E AND REI NSTAL L TH E PRINTER SOFT W ARE Printer is printing bl ank pages Blank pa[...]
-
Page 141
R ECONNECT THE PRINTER POWER SUPPLY 1 Turn off th e p rin ter. No te: Make sure t he printer is not in Sleep m ode. Press and hold for thr ee sec o nds to turn off the p r inter . 2 Unpl ug the power c ord fr om the w all outlet, an d t hen pull out the pow er cor d from the power suppl y. 3 Aft er one minute, r econnect t he power cord in to the p[...]
-
Page 142
R EMOV E AND REI NSTAL L TH E PRINTER SOFT W ARE Unde rstand ing pr inter messages Al ignment Prob lem Try one or mo re of the foll owing : • Load p lain, un marked paper , and the n realig n the print head. No te: The printer will read a ny mar kings on used pa per, whic h could caus e th e alignmen t error mess age to reappe ar. • Press OK to[...]
-
Page 143
Duplex Un it Mi ssing Try one or mo re of the foll owing : • Make su re the duplex unit is properly ins talled at the bac k of t he printer to cle ar the m essage. • Canc el the current job. Ink Cartridge Access Door Open The ink cartridge access door is either open or detached. • If the ink cartridge access door is open, then close it to cle[...]
-
Page 144
1 Ins ert the doo r hin ges into pla ce unti l they clic k . Make sure the door is inserted at a 90-degree position. 2 Close the ink cartridge access door to clear the me ssage. Ink Cartridge Error The printer is unable to authen ticate on e or more of the ins tal led ink cartridges. Try one or more of the following: • Press to canc el the c urre[...]
-
Page 145
Ink Low You may need to replace the specified ink cartridge soon. Try one or more of the following: • Press OK or t o clear t he mess age and c ontinu e printin g. No te: Depending on yo ur pr inter s ettings, you may not be allowed to c ontin ue pri nting until you replac e the spe c ifie d c a rtri dg e. • See the Us er 's G uid e or vis[...]
-
Page 146
Paper Tray [x] Re moved Do one or mor e of t he follo wing: • Inse rt the spec ified pape r tray in to th e printer . • Press OK to clear the message. Printer Memory Full Try one or mo re of the foll owing : • Depen ding on your p rinter m odel, tou ch OK or pr ess OK to clear the message, and then try printing again. • From t he com puter,[...]
-
Page 147
Scanner ADF Cover Open Try one or mo re of the foll owing : • Close the ADF cover t o clear the m essage. • Press to cancel the current scan job. Scanner Dis abled Try one or mo re of the foll owing : • Check the pri nter software sett i ng s or the Adminis tration settin gs from the printer to en able the scanner . For mo re inform at ion, c[...]
-
Page 148
Cl eari ng pape r jams • “Paper jam in the printer” on page 148 • “Pa per jam in the duplex un it” on page 14 8 • “Paper jam in the ADF (select models only)” on page 149 • “Paper or specialty media misfeeds” on page 150 Pa pe r ja m in t h e pr in t er Note: The pa rts ins ide the pri nter ar e sensit ive. Av oid unnec essar[...]
-
Page 149
1 Pull u p the duplex latch and re move the dupl ex unit. 2 Fi rmly gr asp the pa per, and then gent ly pull it o ut. No te: Be careful no t to tear the paper whil e removi ng it . 3 Reins ert the dupl ex unit t o clear t he m essage. Paper j am in the A DF (sel ect mode ls only) Note: The pa rts ins ide the pri nter ar e sensit ive. Av oid unnec e[...]
-
Page 150
Note s: • Make sure t he ADF cover is fully opened to ens u re that the j a mmed pa per is properly removed. • Be careful not to tear the p a per while removi ng it. 2 Close the ADF cover. No te: Make sure t here is no pap er on t he ADF i nput t ray before closing the A DF cover. 3 If necessar y, touch OK or press OK , depending on your printe[...]
-
Page 151
Print trou bleshoot ing • “Poor quality at the edges o f the page” on page 151 • “Strea ks or li nes on printed i mag e” on page 152 • “Print speed is slow” on pa ge 152 • “Com puter s lows dow n when pr inting” o n page 1 53 Poor quali ty at t he edges o f the pa ge If the "Before you trou b leshoot " c hecklist d[...]
-
Page 152
9 Fr om the Prin t Quality pop ‑ up menu , choose Best or Pho to . 10 Cl ick Prin t . Streaks or line s on printe d image If the "Before you trou b leshoot " c hecklist does not solve the pr o blem, then try one or more of th e f ollowing: C HECK THE IN K LEV ELS Replace low or em pty ink c artri dges. S ELECT A HI GHE R PR I NT QU ALIT[...]
-
Page 153
M AXIM IZE COMPUTER PROCESSING SP EED • Cl ose all applications not in u se. • M inimi ze the num ber and size of gra phics and images in the document. A DD MEMOR Y TO THE COMPUTER Consider upgradi ng the RAM. Comp uter slo ws down whe n printi ng If the "Before you trou b leshoot " c hecklist does not solve the pr o blem, then try on[...]
-
Page 154
Copie r or scanner do es not res pond If the "Before you trou b leshoot " c hecklist does not solve the pr o blem, then try one or more of th e f ollowing: S ET YO UR PR INTER AS TH E DEFAU LT PRINTER R EMOV E AND REI NSTAL L TH E PRINTER SOFT W ARE Scanner uni t doe s not c lose 1 Lift the scan n e r unit. 2 Remo ve any obs truc tion kee[...]
-
Page 155
Scan was n ot succ essfu l If the "Before you trou b leshoot " c hecklist does not solve the pr o blem, then try one or more of th e f ollowing: C HECK THE USB CONNECTION 1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. 2 Fir mly plug the s quare end of th e USB cable i nto t he back of the printe[...]
-
Page 156
C HECK YOU R NE TWOR K CON N ECTION Make sure t he p rinter i s connect ed to an Et hernet or wire less ne twork. Y our networ k must be c onne cted to the Inter net for the p r inter to commun icate wit h the SMT P server. C HECK YOU R PROXY CONFIGURA T ION Your pr oxy serve r configu ration shou ld all ow SMTP server connectio ns. For help w ith [...]
-
Page 157
Power supply Answering m achine Cab le modem Splitter Telephone VoIP adapter DSL filter RJ ‑ 11 adapter • If the printer is conn ected to a D igital Subs criber Line, then make sure you are using a DSL filter for the printer. • If t he printer is conn ected to a V oIP adapte r or c able m ode m , then make sure that th e printer is p l ugg ed[...]
-
Page 158
E NAB LE AUTO MATI C FA X CONVERSION If th e receiving fax machine does not support co lor fax, t h en thi s option au tomatically converts the outg oing color fax to blac k a nd white. It also automati cally reduces the reso lution of th e fax to a resol ution tha t th e receiving m achine can suppo rt. 1 Fr om the pr inter c ontro l panel, nav ig[...]
-
Page 159
M AKE SU RE THAT THE PRINTER MEM O RY IS NO T FULL The printer sa ves an incomi ng fax to the prin ter memo ry before it print s the fax. If the printer r uns out o f ink or runs out of paper while rec eiving the fax, then the printer saves t he fax so you can pr int it later. H owever, if the printe r memory is f ull, then the pr inter may not be [...]
-
Page 160
Fax error messages on the prin ter control panel Erro r Message: Wha t i t indi cate s: Pos sib le so lutio ns: Remote Fax E rror T he r ece i vin g fa x m ach ine cann ot receive the fax. The er ror on the receiving end c ould be due to several factors . • Resend the fax. There m ay have been a pr oblem with the quality of the connection. • De[...]
-
Page 161
Erro r Message: Wha t i t indi cate s: Pos sib le so lutio ns: Failed to Co nnect Phone Line Error Phone Line N ot Co nnected The print er cannot detect a dial tone. See the “Fax troubl eshooting checklist.” Phone Line Busy Your telephone line or the telephone line of the receiv ing fax ma chine is busy. This happens es peci ally if the printer[...]
-
Page 162
Memory card troubl eshooti ng checklist Before you troubleshoot, use the following checklist to s ol v e most memory card pro b lems: • Make su re that the memo ry card you are using can be us ed in the pr inte r. • Make sure the me mory card is not da maged. • Make su re mem ory card conta ins suppor ted fi le types . Noth ing happen s when [...]
-
Page 163
Wireless Networking Make s ure: • The SSID is cor rec t. Prin t a networ k setup p age fro m the pri nter to c heck the network set tings. • Your wire less s ecurity sett ings ar e correc t. Log in to the access point and check the se curity set tings. If you ar e not sur e if yo ur se curity inf ormati on is correc t, run the wir eless setup a[...]
-
Page 164
M AKE SU RE THE USB CABLE IS WORKING Try using a different USB cab l e. If you are using a cable longer than 10 feet, then try using a shorter cable. Note: USB hubs, e xtensio n cables, p ort rep licato rs, and do cking sta tions m ay cause c onnection i ssues. Try disco nnecting these dev ices so that your pr inter i s direc tly connec ted to your[...]
-
Page 165
Compu ter firewall is blocking co mmunication wi th t he printer Fi rewall set tings may h ave st opped the printe r fro m connect ing to you r compute r. If a fire wall is ins talled on y o ur comput er, then do one o f the following : • Turn o ff your comput er fire wall. • Updat e your co mputer firewall to the most recent v ersion, a nd t h[...]
-
Page 166
3 Press the lef t or righ t arrow butto n to scrol l to Yes , and then pre ss OK . The printer restarts a utomatically a fter rese tting the wir eless settings to facto ry defaults. 4 Wh en pro mpted to s et the i nitial set tings of your pri nte r, mak e your s election s using the printer control p anel butto ns. Init ial Se tup Comp let e ap pea[...]
-
Page 167
C HECK IF YO UR A CCES S PO IN T HAS AN ASS OC IATI O N / REGISTRA TION BUTTON Wirel ess broadban d bo xes in Euro pe, the Middle East , and Africa suc h as Liveb ox, Alic eBox, N9UF Bo x, Fr eebox, or Club Inte rnet m ay requir e you to p ress an asso ciati on/regis tration butt on when add ing t he printer to your wir eless network. If you are us[...]
-
Page 168
4 Type ipco nfig , and then pres s Ent e r . Chec k the Wir eless N etwork Co nnecti on section: • The “ Default Gateway” entry is typi cally the access point . • The IP addre ss appear s as f our set s of num bers s eparated by perio ds, s uch as 19 2.168 .2.134 . b Type the user name an d passwor d of t he access point when promp ted. c C[...]
-
Page 169
c Click TCP/IP . The Router entry is typically the access p o int. 2 Type your u ser name and p assw ord wh en pro mpted, and then c lick OK . 3 In the Wire less setti ngs sec tion, lo ok fo r the SS ID. 4 Wr ite down the SSID , secu rity t ype, and the WEP key or WPA/W PA2 pre share d key/p assph rase (if show n). Notes: • Make s ure you copy th[...]
-
Page 170
For Macint osh us ers 1 From the Appl e menu, navigate to : About This Mac > More Info 2 Fr om the C ontent s pane , choose Netwo rk . 3 If you ar e connected o ver a w ireless ne twork, then c hoose AirPor t fr o m the A ctive Services list. The Router entr y is typically the access point. Loc ating t he prin ter IP ad dress • Fr om the pr in[...]
-
Page 171
5 Cl ick the Por ts tab, and th en locate the s elected port. The selected port has a check mark beside it in the Po r t column. 6 If the Desc ription colum n of t he selec ted por t indica tes that it i s a USB por t, t hen scro ll thro ugh t he lis t and sel ect the port with Printer Port in the Descripti on column. Check the printer m odel in th[...]
-
Page 172
E LIM I NA TE NET WOR K CON GE STI ON If a w ireless netw ork is to o busy, t hen the compu ter an d pr inter may h ave dif ficulty communi cating with eac h other . Some causes of wireless networ k cong estion can i ncl ude: • Tr ansf erri ng large fil es acro ss t he net work • Ne tw orke d gam es • Peer ‑ to ‑ peer file sw apping appli[...]
-
Page 173
To assign a s tatic IP add ress to the printer: 1 Complete th e wireless se tup, allowing th e prin ter to receive a DHCP ad dress from a DHCP ser ver on the network. 2 Print a n etwork setup p age to see what IP a ddress is current ly assigned to the pr i nt er. 3 Open a Web br owser and the n type the printer IP addr ess in the addres s fie ld. P[...]
-
Page 174
M AK E SUR E TH E PRI N TE R POWER IS ON Make sure t he p rinter i s connec ted to a po wer source an d is turn ed on. M AK E SUR E TH AT THE NET WOR K IS OPE RAT IN G PROPER LY • Tr y to acces s other compute rs on t he network. • M ake sur e all switc hes, hubs , and othe r connect ing devic es are turned o n. M AK E SUR E TH E PRI N TE R HA [...]
-
Page 175
C HE CK TH E ADDR ESS ENTERED IN TH E W EB BR O W SER • De pendi ng on the net work sett ings, yo u may need to ty pe “ ht tp s:// ” in ste ad of “ http :/ / ” be fore the pri nter IP addr ess to a ccess the E mbedd ed Web S erver. For m ore i nformation , c ontact your s ystem support per son. • M ake sur e printer IP addr ess is corre[...]
-
Page 176
Notices Product i nformation Prod uct na me: Lex mar k Pro 400 0 Se ri es Machi ne type: 4447 Mode l(s): Pro4 00 0: 0n0 , 0nE; Pro4 00 0c: 0 00 Edition noti ce Apr il 2012 Th e f oll o wi ng p a r agr ap h d oe s n ot a p ply t o a ny co unt ry wh ere s uch provision s are inco nsistent w ith local law: LEXMARK INTERNATIO NAL, INC., P ROVIDES THIS [...]
-
Page 177
GOVERNMENT END USERS The Sof tware Program and an y related do cu mentation a re " Commerc ial Item s," as t hat term is defi ned in 4 8 C.F.R. 2. 101, " Compute r Sof twar e" and " Comm erc ial Comp uter S oftw are Document ation ," as suc h term s ar e used in 48 C.F .R. 12. 212 or 48 C.F.R. 227. 720 2, as a pplicab [...]
-
Page 178
The manuf actu rer is not r espons ible for r adio or telev ision int er ference c ause d by using other t han re commen ded cables o r by unaut horized c hanges or modif ications t o th is equipm ent . Unaut horized c han ges or m odifica tions coul d void the user's authority to o perate this equipm en t. Note: To assure compliance with FCC [...]
-
Page 179
The WE EE log o signi fies spe cific rec ycling pro grams and proc edures for ele ctronic produc ts in coun tries o f the E urop ean Union. W e e ncourage t he rec ycling of our products. If you have f urther quest ions abo ut rec ycli ng options , visit the Lexmark Web site at www.lexm ark.com for your local sal es offic e phon e number . Battery [...]
-
Page 180
Mode Desc ri ptio n Pow er c on sumpt ion (Wa tts ) Printing The product i s generating hard ‑ copy ou tput from electronic inpu ts. 3 7 W Copy The pr odu ct i s generating hard ‑ copy ou tput from hard ‑ copy o rigi n al documents. 36 W Scan T he product is scanning hard ‑ copy documents. 19 W Ready The product is waiti ng for a pr int job[...]
-
Page 181
European Com munity (EC) d irectives confor mity This p roduct is i n c onformi ty with the prot ection r equirem ent s of E C Co uncil d irect ives 2 004/10 8/EC, 200 6/95/E C and 2009 /12 5/EC on the ap prox imation and harmon izatio n of the laws of the Mem ber Stat es relat ing to el ectroma gnetic compa tibility, safety of electrical equip men[...]
-
Page 182
This equi pment cont ains no u ser s ervice able part s. F or repa ir and w arranty informatio n, contac t Lexmark I nternationa l, Inc. See the pr evious para graph for c ontact inform ation. Connecti on to party line s ervice is sub ject t o state tariffs. Contact t he state publ ic utilit y commission , public ser vice com miss ion, o r corp ora[...]
-
Page 183
la prise de cou rant à la quelle l’équ ipement est conn ecté. U tilisez u n parasurt enseu r répond ant à des c aractéri stiques nominale s sat is faisante s et certi fié par le la borat oire d ’assur eurs UL ( Under write r’s L abora tories) , u n autr e lab oratoire agréé de ty pe NRTL (Natio nally Rec ognized Tes ting Labora tory)[...]
-
Page 184
Uso d el prod otto in Svizzer a Questo pr odotto ric hiede un filtro toni Bill ing svizzero , (codice Lex mark 14B510 9 o 8 0D187 7) da i nst allar e su tut te l e linee che r icevono im pulsi remoti i n Sviz zera. È necessar io utiliz zare il filtr o poiché gli im pulsi remoti sono presenti s u tutte le linee ana logic he in Svizzer a. Notice to[...]
-
Page 185
The installer of this radio equipm ent m ust ensu r e that the an tenna is locat ed or pointe d such that it does not emit RF fields in excess of Healt h Canada limi ts for the general po pulation ; consult Safet y Code 6, ob tainable from Hea lth Canada's W eb site www.hc -sc.gc.ca/rpb. The ter m "IC:" bef ore the c ertif ication/re[...]
-
Page 186
with in certain v olta ge limit s and on r adio eq uipment an d te lecommun icati ons ter minal eq uipment a nd on the ecod esign of energy- r elated products. Compli ance is indi cated b y the CE mark ing. Operat ion i s allowed in all EU and EFT A coun tries, bu t is restr icted to i ndoor use only. The manuf actur er of thi s product is: Lexmark[...]
-
Page 187
Italiano C on la presente Lexmark Inter national, Inc . dichiara che ques to questo pr odotto è conf orme ai requisiti es senzial i ed a lle altr e disp osizi oni p ertinen ti st abili te dal la di rettiva 1 999/ 5/CE. Latviski Ar šo Lexmark International, Inc. deklar ē , ka šis i zstr ā d ā jums at bi lst Dir ekt ī vas 1999/5/EK b ū tiskaj[...]
-
Page 188
If you transf er this produc t to anothe r user , w arranty serv ice under the t erm s of this stat ement is avai lable to t hat user for the r emainder of the warranty period . You should tra nsfer proof of or i g i nal p urchase and this s tatement to th at use r. Lim ited warra nty se rvice The war ranty pe riod st arts on t he date of ori ginal[...]
-
Page 189
WARRANT IES, EXPRESS OR IMPL IED, WILL APPLY AFTE R THIS PERIO D. A LL INFORMAT ION, SPECIFICA TIONS, PRICES, AND SERV ICES ARE SUB JECT TO CHANGE AT AN Y TIME WITHOUT NOTICE. Limitatio n of lia bility Your s ole rem edy under this lim ited warran ty is se t fort h in this doc ument. For any claim conc erni ng perf ormanc e or nonperformance of Lex[...]
-
Page 190
Index Nume ri cs 2 ‑ sided, fax settin g 87 802. 1X authe ntica ti on 110 A ad hoc n etwork 12 2 ad hoc w irele ss netw ork addi ng a pri nter 10 8 addi ng network f older shor tcut 6 5 addi tional com puters instal ling wireless printer 105 Addit ional Sol uti ons custo mize printer settings usi ng 131 Address Book setting up 89, 9 0 Address Boo[...]
-
Page 191
cleaning printhe ad nozz les 134 Clo se Print er 142 Club Int ern et 106 coated paper loading 32 coll ating copies 6 0 color scanning 7 1 Commu nicati on not a vailable mess age 16 9 compu ter slo ws down when print ing 15 3 conf iguring fa x set ting s 87 , 88 IP addr ess 107 conf iguring e ‑ mail s ettings 72 conf iguring s ecurit y setti ngs 1[...]
-
Page 192
er ror corr ect ion, fax settin g 87 err or us ing me mory card 162 Et herne t 126 netwo rk indicato r ligh t 105 Et herne t net wor k inform ation nee ded for set ting up Ether net pri nting 11 0 Et hern et p ort location 12 Eth ernet set up informat ion needed fo r 110 exit bin location 11 EXT po rt location 12 extending the du plex print ing dr [...]
-
Page 193
G Ge ne r al S et t ing s custo mize printer settings usi ng 131 gloss y paper loading 32 greetin g cards loading 33 Group Dial setting up 89, 9 0 H header bar 13 0 home page areas 13 0 under standing 130 I ID card s copy ing 59 Import/E xpor t custo mize printer settings usi ng 131 improvin g scan quality 7 1 incor rect lang uage appear s on displ[...]
-
Page 194
sup ported types 47 mem ory ca rd can not be inserted 16 2 mem ory ca rd slot location 11 mem ory card tr oubles hooting chec klist 1 62 nothin g happens when memory card is inserted 16 2 Me mory Devi ce Acces s E rro r 145 minimum system requirements 23 mov ing the printer 135 MSCH APv2 110 m ult ipl e p ag es pe r s he et , print ing 43 m ult ipl[...]
-
Page 195
selecting a location 12 sha ring 116 sharing in Windo ws 116 print er cont rol panel buttons 16 display 16 Etherne t indicat or 16 layout 16 location 11 usi ng 16 Wi ‑ Fi ind ica tor 1 7 print er do es not res pond 140 pri nter me mory fa x 10 0 Printer Memory Full 146 print er mes sages Alignment Problem 1 42 Cannot C ollate Jo b 14 2 Change [Pa[...]
-
Page 196
RJ ‑ 11 ad apte r 83 S safet y informatio n 6 savi ng ene rgy 18 savi ng paper 1 8 savi ng paper d efault s etting s 34 scan improving qu ality 71 PIN 71 scan j ob canceling 71 scan w as no t succes sful 15 5 Scanned Docume nt Too L ong 1 46 Scanner ADF Cover Ope n 147 Scanner Disab led 147 scanner glass cleaning 1 35 location 11 scanner unit do [...]
-
Page 197
teleco mmuni cation notic es 1 81, 182, 183, 184 tips f or copy ing 58 e ‑ mailing 7 4 pri nting 40 receiving f axes 92 scannin g 64 sendi ng faxes 91 tr an smi ssi on repo rt, fax 98 transmit ke y WEP 109 transparenc ies loading 33 tray loading paper 29 tray s link ing 39 trou blesho oting cannot op en E mbedded Web Ser ver 17 4 checki ng an unr[...]
-
Page 198
locating 117 WEP transmit key 10 9 Wi ndows instal ling pri nter on wir eless network 1 04 Wi ndows sof tware Abbyy Sprint OCR 23 Phone Bo ok 2 3 Prin ter Ho m e 23 Printer Setup U tility 23 Printing Prefer ences 23 Prod uct Updat e 23 Status M ess eng er 23 Status M onit or Cente r 23 Too ls for Of fice 2 3 Wireless S etup Ut ility 2 3 wired ( Eth[...]