LG Electronics W286L manuel d'utilisation

User's Guide _V_ake sure to read the Impo_ant Precautions before using the product. Keep the User's Guide(CD)in an accessibleplacefor future reference. See the label attached on the product and give the information to your dealer when you ask for service, i[...]

This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power [...]

On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage, Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, Displays are provided with ventilation openings in the cab[...]

On Cleaning • Unplug the display before cleaning the face of the display screen, • Use a slightly damp (not wet) cloth, Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock, • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching, Do not clean[...]

!!! Thank for selecting LGE products !!! • Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord DVI-D Signal Cable (This feature is not available in all countries.) 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attached to this pr[...]

• Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting and Disassembling the stand 1, Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction. Make sure you push the Stand Base until the end. Sta[...]

3. Turn the screw to the right to fix the Stand Body to the Stand Base. Screw Turn the screw by using the screw handle. 4, Then fold the screw handle flat. 5, Once assembled take the monitor up carefully and face the front side. 6. To disconnect the Stand Base from the Stand Body, unfold the screw handle and turn it to the left.[...]

• Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below. 1, Adjust the position of the panel in various ways for maximum comfort. • Tilt Range "-2°-15 ° -2 ° 15 ° y ......... & /[...]

Connecting with the PC/AV equipment 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect the signal cable @. When attached, tighten the thumbscrews to secure the connection. 3, Connectthe Q ' power cable with the AC-DC adapter (AC-DC power supply) O&ap[...]

4, Gather the cables together and use the Cable Holder to arrange them as shown in the picture. Cable Holder !i: ¸ 5, Press the Power Button ((_) on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only for D-SUB input)[...]

Front Panel Controls srnOrt Button Use this button to enter CINEMA MODE, AUTO BRIGHT, TIME CONTROL, LIVE SENSOR or SMART menus. For more information, refer to page 16. F:U£1 Button Use this button to move to EZ ZOOMING, 4:3 IN WIDE and PHOTO EFFECT for D-SUB/DVI-D signal input. Use this button to move to 4:3 IN WIDE, PHOTO EFFECT and VOLUME for HD[...]

Use these buttons select functions in the On A Buttons to or adjust Screen Display. .,f.ENGINE • Use this function to select optimal image conditions in accordance with the surrounding environment (Brightness, Image type). For more information, refer to page 19. SOURCE • During initial input, the input signal connected is automatically recogniz[...]

Power Indicator The indicator redifthe is power stays display running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking red. Light Sensor This is the sensor to measure the external brightness. Makes the screen brighter or darker, depending on the surrounding brightness, when AUTO BRIGHT is set to O[...]

Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the O[...]

The following table indicates all the On Screen Display control, adjustment, and setting menus. : D-SUB(Analog signal) input DVI-D(Digital signal)input HDMI input To focus on the moving picture selected To control screen brightness automatically To notify the user of a specified time To turn the live sensor of the touch button LED on oroff SMART ,&[...]

MOVIE To select or customize desired image settings To adjust the brightness, contrast and gamma of the screen LANGUAGE OSD POSITION To customize the screen status for a use¢s operating environment[...]

The OSD screen will appear when you press the smOrt button on the front of the monitor. CONTR©/o I • MENU:Exit, • • •:Move, • SET :Select CINEMA MODE To focus on the moving picture selected. This function adjusts the brightness of areas other than the user-selected area to provide an environment and image quality optimized for videos or [...]

,_;nn The OSD screen will appear when you press the FUN button on the front of the monitor. D-SUB/DVI-D input • MENU : Exit • • • : Move • SET :Select HDMI input EZ ZOOMING To select the display resolution. When you select 'EZ ZOOMING' in OSD, display resolution goes one step down so characters and images look bigger. When you s[...]

PHOTO EFFECT Use the AUTO/SET button to go to sub-menu. !_ PHoTo EFFECT To select the color effects of the screen. • NORMAL The PhotoEffect function is disabled. • GAUSSIAN BLUR This menu changes the screen to be more colorful and smoother. • SEPIA This menu changes the screen to be Sepia tone (brown color). • MONOCHROME This menu changed t[...]

The OSD screen will appear when you touch the jI_ENGINE button on the left bottom of the monitor. These features let you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). Sub-menu • MENU • Save & Exit • T, i • Move When F-ENGINE is executed, two kinds of tone are display[...]

D-SUB/DVI-D input DEMO This is used for advertisingin the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumerscan check the differenceafter applying the video mode. SPORTS Select this when you watching generalsports. To adjust the USEI_ sub-menu function, press the AUtO/SET Button[...]

_ • You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu • MENU [] : Exit • _' • :Adjust (Decrease/Increase) • SET [] : Ente[...]

i _ PICTURE D-SUB/DVI-D input BRIGHTNESS CONTRAST GAMMA BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50 / 0 / 50 On the monitor, high gamma values display whitish images and low gamma values display blackish images. You can set the offset level. If you select 'HIGH'[...]

TRACKING HORIZONTAL VERTICAL To move image left and right. To move image up and down. • MENU : Exit • • : Decrease • • :Increase • SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display.[...]

SETUP D-SUB input SETUP • MENU : Exit • • : Adjust • • • Adjust • SET • Select another sub-menu LANGUAGE OSD POSITION WHITE BALANCE OVERSCAN RTC POWER INDICATOR FACTORY RESET To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is differe[...]

Check the following before calling for service. @ Is the power cord of the display connected? @ Is the power indicator light on? @ Is the power on and the power indicator red? @ Is the power indicator blinking? @ Do you see an "OUT OF RANGE" message on the screen? @ Do you see a "CHECK SIGNAL CABLE" message on the screen? • Ch[...]

@ Display Position is incorrect. @ On the screen background, vertical bars or stripes are visible. @ Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using th[...]

@ The screen color is mono or abnormal. @ The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly insertedin the slot. • Set the color setting higherthan 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlac[...]

21.995 inches _55.8673 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8673 cm 0.282 x 0.282 mm (Pixel Pitch) Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic_ Separate Sync. SOG (Sync On Green), Digita Signal Input Input Form 15 pin D-Sub Connector (Analog) DVI-D Connector [...]

24 inches (60.97 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 60.97 cm 0.2767 x 0.2767 mrr _Pixel Pitch) Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) nput Form Separate Sync. SOG (Sync On Green), Digital Signal Input Input Form 15 pin D-Sub Connector (Analog) DVI-D Connector (Digi[...]

Preset Modes (Resolution)- D-sub(Analog) / DVI-D(Digital) INPUT W2286L 1 VGA 720 X 400 31.468 70 2 VESA 640 x 480 31.469 60 3 VESA 640 x 480 37.500 75 4 VESA 800 x 600 37.879 60 5 VESA 800 x 600 46.875 75 6 VESA 1024 x 768 48.363 60 7 VESA 1024 x 768 60.123 75 8 VESA 1152 x 864 67.500 75 9 VESA 1280 x 1024 63.981 60 10 VESA 1280 x 1024 79.976 75 11[...]

HDMI Vedio INPUT 1 2 3 4 5 6 7 8 48op 31,5o 60 576p 31,25 50 72oP 37,50 50 72op 45,00 60 lO8Oi 28,12 50 lO8Oi 33,75 60 lo8oP 56,25 50 lo8oP 67,50 60 Indicator On Mode Red Sleep Mode Red Blinking Off Mode Off[...]

D[gffa[[y yours o o o o oooo[...]